RC 5500 SERIES. Specifications Stand-Up Rider Lift Truck

RC 5500 SERIES Stand-Up Rider Lift Truck

Stand-Up Rider Lift Truck 4" (100 mm) 42" (1065 mm) 8" (205 mm) 33" (840 mm) 21 48" (1220 mm) 88" (2235 mm) Standard - 79.4" (2015 mm) Head Clearance 84.5" (2145 mm) Optional - 75.9" (1925 mm) Head Clearance *5.1" (*130 mm) 19.8" (503 mm) 14 13 *82.9" (*2105 mm) 57.5" (14 mm) 17 9 18 9.5" (240 mm) Height to top of rollers 6.8" (170 mm) 38 42 15 22 *Clearance with Drive-in Rack application. Adjust for different overhead guard heights.

General Information Performance Weight Chassis Battery Motors Imperial Metric Imperial Metric Imperial Metric 1 Manufacturer Crown Equipment Corporation 2 Model RC 5510/15-30 5520/25-30 5530/35-30 3 Load Capacity* Rated to 154" (3911 mm) lb kg 3000 13 3000 13 3000 13 4 Load Center Fork Face to Load CG in mm 24 0 24 0 24 0 5 Power Electric 36 Volts 6 Operator Type Stand-up Rider Counterbalanced 7 Tire Type Press-on Solid Cushion 8 Wheels (x = driven) Number Front/Rear 2x/2 9 Mast Lifting Height in mm See Mast Chart 11 Free Lift Height in mm See Mast Chart 12 Fork Carriage ITA Class II 13 Forks Standard L x W x T in mm 36x4x1.5 915x102x38 36x4x1.5 915x102x38 36x4x1.5 915x102x38 Optional Lengths in mm 1070, 1145, 1220, 1375, 1070, 1145, 1220, 1375, 1070, 1145, 1220, 1375, 14 Tilt B /F degree See Mast Chart 15 Headlength** in mm 62.9 1598 65.2 1656 67.5 1715 16 Width Overall Standard Tread in mm 42.0 1067 42.0 1067 42.0 1067 17 Height Mast Collapsed in mm See Mast Chart 18 Mast Extended in mm See Mast Chart 21 Turning Radius in mm 51.7 1313 54.0 1372 56.2 1427 22 Load Distance** Wheel Cntr to Fork Face in mm 11.3 287 11.3 287 11.3 287 23 Aisle Width Right Angle Stack in mm Turn Radius + Load Distance + Load Length + Clearance 24 Speed Travel 36V Empty/Loaded mph mm/s 7.2/7.2 11.6/11.6 7.2/7.2 11.6/11.6 7.2/7.2 11.6/11.6 24a w/productivity Pkg. 36V Empty/Loaded mph mm/s 7.8/7.2 12.6/11.6 7.8/7.2 12.6/11.6 7.8/7.2 12.6/11.6 25 Speed Lift DC Empty/Loaded fpm mm/s 90/ 457/305 90/ 457/305 90/ 457/305 AC Empty/Loaded fpm mm/s 110/65 559/330 110/65 559/330 110/65 559/330 26 Speed Lower Empty/Loaded fpm mm/s 90/90 457/457 90/90 457/457 90/90 457/457 32 Weight, Less Battery lb kg 6350 2880 6390 2900 5929 2690 33 Axle Load with Unloaded Front lb kg 3992 1810 4167 1890 4522 2050 34 Max Battery Unloaded Rear lb kg 4337 1970 4489 2035 4057 1840 35 Tires Number Front/Rear 2/2 36 Size Front in mm 16x7x10.5 406x178x267 16x7x10.5 406x178x267 16x7x10.5 406x178x267 37 Size Rear in mm 10x5x6.5 254x127x165 10x5x6.5 254x127x165 10x5x6.5 254x127x165 38 Wheelbase in mm 42.7 1085 45.0 1143 47.2 1198 39 Tread Width Front - Drive in mm 35.0 889 35.0 889 35.0 889 Rear - Steer in mm 6.7 170 6.7 170 6.7 170 40 Ground Clearance, Lowest Point in mm 3.0 76 3.0 76 3.0 76 41 Loaded Center of Wheelbase in mm 4.2 107 4.2 107 4.2 107 42 Grade Clearance, Loaded % 41 39 37 43 Brakes Service Foot - Motor 44 Parking Auto - Electric 45 Battery Type Lead Acid Compartment B C D 46 Capacity AH 775 930 1085 kwh 27.2 32.6 38.1 47 Weight - Min lb kg 1710 780 1990 905 2280 1035 Weight - Max lb kg 1980 895 2270 1025 2650 1200 Comp t. Size - Max Length 13.6 350 15.9 410 18.1 465 Width 38.56 979 38.56 979 38.56 979 Height 31 787 31 787 31 787 Cable Lead Length Connector Position in mm 12/A 300/A 12/A 300/A 12/A 300/A 48 Battery Floor Height With Rollers in mm 6.8 170 6.8 170 6.8 170 49 Motors Traction Motor, dia in mm 7.5 191 7.5 191 7.5 191 50 Lift Motor, dia DC/AC in mm 6.7/7.5 170/191 6.7/7.5 170/191 6.7/7.5 170/191 51 Operating Pressure For Attachments psi bar Up to 2500 Up to 175 Up to 2500 Up to 175 Up to 2500 Up to 175 * Optional masts, attachments, longer load dimensions and higher lifting heights may result in derating of the capacity. Contact your local dealer. ** Add 4.25" (108 mm) for quad masts; add 2" (51 mm) for sideshift option. Includes load backrest. Performance specifications are based on a truck equipped with a 190" (4825 mm) triple telescopic mast.

General Information Performance Weight Chassis Battery Motors Imperial Metric Imperial Metric Imperial Metric 1 Manufacturer Crown Equipment Corporation 2 Model RC 5530/35-35 5540/45-40 5555-40 3 Load Capacity* Rated to 154" (3911 mm) lb kg 3500 10 4000 1800 4000 1800 4 Load Center Fork Face to Load CG in mm 24 0 24 0 24 0 5 Power Electric 36 Volts 6 Operator Type Stand-up Rider Counterbalanced 7 Tire Type Press-on Solid Cushion 8 Wheels (x = driven) Number Front/Rear 2x/2 9 Mast Lifting Height in mm See Mast Chart 11 Free Lift Height in mm See Mast Chart 12 Fork Carriage ITA Class II 13 Forks Standard L x W x T in mm 36x4x1.75 915x102x45 36x4x1.75 915x102x45 36x4x1.75 915x102x45 Optional Lengths in mm 1065, 1145, 1220, 1370, 1065, 1145, 1220, 1370, 1065, 1145, 1220, 1370, 14 Tilt B /F degree See Mast Chart 15 Headlength** in mm 67.7 1720 70.1 1781 74.4 1889 16 Width Overall Standard Tread in mm 42.0 1067 42.0 1067 42.0 1067 17 Height Mast Collapsed in mm See Mast Chart 18 Mast Extended in mm See Mast Chart 21 Turning Radius in mm 56.2 1427 58.6 1488 62.8 1596 22 Load Distance** Wheel Cntr to Fork Face in mm 11.5 292 11.5 292 11.5 292 23 Aisle Width Right Angle Stack in mm Turn Radius + Load Distance + Load Length + Clearance 24 Speed Travel 36V Empty/Loaded mph mm/s 7.2/7.2 11.6/11.6 7.2/7.2 11.6/11.6 7.2/7.2 11.6/11.6 24a w/productivity Pkg. 36V Empty/Loaded mph mm/s 7.8/7.2 12.6/11.6 7.8/7.2 12.6/11.6 7.8/7.2 12.6/11.6 25 Speed Lift DC Empty/Loaded fpm mm/s 90/57 457/290 90/50 457/250 na na AC Empty/Loaded fpm mm/s 110/ 559/305 110/55 559/280 110/55 559/280 26 Speed Lower Empty/Loaded fpm mm/s 90/90 457/457 90/90 457/457 90/90 457/457 32 Weight, Less Battery lb kg 6429 2915 6457 2930 7975 3615 33 Axle Load with Unloaded Front lb kg 4557 2065 4850 2200 5897 2675 34 Max Battery Unloaded Rear lb kg 4521 2050 4678 2120 5528 2505 35 Tires Number Front/Rear 2/2 36 Size Front in mm 16x7x10.5 406x178x267 16x7x10.5 406x178x267 16x7x10.5 406x178x267 37 Size Rear in mm 10x5x6.5 254x127x165 10x5x6.5 254x127x165 10x5x6.5 254x127x165 38 Wheelbase in mm 47.2 1198 49.6 12 53.9 1368 39 Tread Width Front - Drive in mm 35.0 889 35.0 889 35 889 Rear - Steer in mm 6.7 170 6.7 170 6.7 170 40 Ground Clearance, Lowest Point in mm 3.0 76 3.0 76 3.0 76 41 Loaded Center of Wheelbase in mm 4.2 107 4.2 107 4.2 107 42 Grade Clearance, Loaded % 37 35 31 43 Brakes Service Foot - Motor 44 Parking Auto - Electric 45 Battery Type Lead Acid Compartment D E F 46 Capacity AH 1085 1240 1395 kwh 38.1 43.6 48.5 47 Weight - Min lb kg 2280 1035 20 1180 3100 1410 Weight - Max lb kg 2650 1200 3070 1390 3450 15 Comp t. Size - Max Length 18.1 465 20.5 525 22.8 580 Width 38.56 979 38.56 979 38.56 979 Height 31 787 31 787 31 787 Cable Lead Length Connector Position in mm 12/A 300/A 12/A 300/A 12/A 300/A 48 Battery Floor Height With Rollers in mm 6.8 170 6.8 170 6.8 170 49 Motors Traction Motor, dia in mm 7.5 191 7.5 191 7.5 191 50 Lift Motor, dia DC/AC in mm 6.7/7.5 170/191 6.7/7.5 170/191 6.7/7.5 170/191 51 Operating Pressure For Attachments psi bar Up to 2500 Up to 175 Up to 2500 Up to 175 Up to 2500 Up to 175 * Optional masts, attachments, longer load dimensions and higher lifting heights may result in derating of the capacity. Contact your local dealer. ** Add 4.25" (108 mm) for quad masts; add 2" (51 mm) for sideshift option. Includes load backrest. Performance specifications are based on a truck equipped with a 190" (4825 mm) triple telescopic mast.

Mast Chart RC 5500 Series in mm in mm in mm in mm in mm 9 Lifting Height 154 3910 190 4825 208 5280 226 5740 244 6200 11 Free Lift Height 20.2 510 32.2 815 38.2 970 44.2 1120 50.2 1275 14 Tilt B/F* (degree) 3/5 3/5 5/5 5/5 5/5 5/5 5/5 5/5 5/5 5/5 17 Mast Collapsed Height 71.3 1815 83.3 2115 89.3 2265 95.3 2415 101.3 2565 18 Mast Extended Height 202 5135 238 45 256 6505 274 69 292 7420 TT Mast Chart RC 5500 Series in mm in mm in mm in mm in mm 9 Lifting Height 240 95 246 6245 258 6550 264 6705 276 7010 11 Free Lift Height 33.2 840 36.2 915 39.2 995 42.2 1070 45.2 1145 14 Tilt B/F* (degree) 3/5 3/5 3/5 3/5 3/5 3/5 3/5 3/5 3/5 3/5 17 Mast Collapsed Height 83.4 2120 86.4 2195 89.4 2275 92.4 2350 95.4 2425 18 Mast Extended Height 288 7315 294 7470 306 7775 312 7925 324 8230 QUAD All values with 48" (1220 mm) load backrest * Forward tilt limited to 2º above staging RC 5500 Series Technical Information Standard Equipment 1. Crown s Access 1 2 3 Comprehensive System Control 2. e-gen Braking System with automatic parking brake 3. Intrinsic Stability System Travel speed reduction and appropriate brake control when forks are above free lift Forward tilt interlock above staging Controlled tilt speeds Counterweight exceeds required standards Cornering speed control Ramp hold Ramp speed control 4. FlexRide Suspension 5. Operator compartment Crown flexible side stance Padded back support with integral side restraint Premium rubber floor mat Padded arm rest Operator console with desk top work surface and storage Entry bar Posture relief step 6. Multi-task control handle 7. Tilt position assist 8. Crown display Battery discharge indicator with lift interrupt and re-key feature Hour meters / travel distance / stop watch Pin code access capable Event code display with five (5) key navigation Access 1 2 3 diagnostics P1, P2, P3 Performance tuning 9. AC traction system 10. 36-volt system 11. 350 amp battery connector 12. InfoPoint System with Quick Reference Guide 13. Color-coded wiring 14. Battery rollers 15. Dual 10" (254 mm) cushion steer tires 16. Large 16" (406 mm) cushion drive tires 17. Crown-manufactured drive and lift motors 18. High visibility power unit 19. Radial design overhead guard with third post 20. High visibility mast with in-line hose routing 21. Hydrostatic power steering 22. 5 forward tilt 23. 48" (1220 mm) high load backrest 24. Reverse steering 25. Drive axle debris guard Optional Equipment 1. AC Hydraulics 2. Productivity package 3. Operator compartment wall padding 4. Adjustable armrest 5. Freezer and corrosion conditioning 6. Sideshifter 7. Quick disconnect hydraulic connectors 8. Forward steering 9. EE rating 10. InfoLink Ready System 11. Keyless on/off switch 12. Fork lengths 13. Polished and tapered forks 14. Load backrest heights 15. Non-marking smooth or lug rubber tires 16. Drive-in rack overhead guard 17. Overhead guard heights 18. Tilt options 19. Work lights 20. Strobe lights 21. Audible travel alarms 22. Suspended floorboard 23. Positive/Negative accessory cable 24. Work Assist Accessories Clip pad and hook Clamp Clamp and mounting plate Operator fan Fire extinguisher Dome light Storage pocket 25. LED worklights with plastic lenses Operator Compartment Soft, rounded surfaces make the compartment interior more comfortable. Streamlined exterior smooths entry/exit for the operator. A low floor height, (9.5" [240 mm]) first greets the operator. A patented FlexRide suspended floor provides a comfortable ride for a wide range of operators. A footrest provides postural relief during stationary tasks, complementing the largest floorboard in its class. Crown s flexible side stance allows the operator to change positions to increase comfort and productivity.

Technical Information An entry bar with sensors automatically slows travel and sounds an audible alarm when activated, encouraging safe foot positioning inside the truck. The Multi-Task Control Handle naturally bridges Crown s current and past designs. Intuitive operation is increased, reducing the learning curve. Blending of hydraulic control functions and traction can improve productivity. Control handle activation forces are reduced. Soft grip steer tiller with hydrostatic steering reduces operator fatigue. Operator visibility is improved with: Low-profile sculpted power unit High visibility mast Angled overhead guard post and placement Radial design overhead guard Flexible side stance Crown Drive System Crown has applied the latest generation AC drive system, enhanced with Access 1 2 3 technology. The demand for high efficiency systems that closely match customer torque requirements is met with this generation control system. Crownmanufactured, independently controlled, AC drive motors are specifically designed to optimize system integration between the traction and braking controls. Crown s Access 1 2 3 technology provides optimum performance and control by offering a communication interface for operators and technicians, intelligent coordination of lift truck system and simplified service with advanced diagnostics. The Crown display is used for easy troubleshooting, access service history and set performance features. A distribution panel is conveniently located with all test points, control fuses and central wiring for easy troubleshooting. Three modes of performance can be selected to accommodate operator experience or application requirements. e-gen Braking System Variable regenerative motor braking is optimized and virtually eliminates brake maintenance. The appropriate amount of stopping force is applied to match operator brake input and the current operating conditions of the truck. The closed loop Access 1 2 3 traction control will keep the truck static until a travel input is requested, even when operating on a grade. Automatic electric parking brakes activate when the operator releases the brake pedal, a travel input has not been requested or battery power has been disconnected. Steering Load-sense hydrostatic steering is an on-demand system which reduces energy consumption. Smooth, quiet steering control with minimal operator effort required at the steer tiller. Steer tires rotate 182º for maximum maneuverability. Crown s hydrostatic steering system is simplified with significantly fewer parts, thus reducing maintenance requirements. Hydraulics The hydraulic system provides continuous filtration. A pressurized steel hydraulic tank reduces oil misting and contamination. Hydraulic attachments can be added easily in the field. Hydraulic manifold is mounted on the mast reducing the number of hoses and fittings. Ram displacement type lift cylinders and two double acting tilt cylinders are Crown-manufactured. All rams and piston rods are hard chrome plated to reduce pitting and extend cylinder packing life. O-ring face seal fittings are used to eliminate leaks. Mast Assembly Crown-manufactured mast assembly utilizes a flush-face interlocked I-beam design to improve visibility and reduce truck length. Roller bearing studs are welded on both sides of the rails for maximum strength and roller bearings are canted to run in the thick cross section of the rail. Tie bars wrap around the rails for added strength and to resist off-center load forces. In-line hose routing opens up visibility. Cylinders are placed to the sides to create a high visibility design. The mast has four points of attachment to the truck for good load force distribution. Two mounting points are at the frame, where tilt cylinders attach. Tilt cylinders use spherical bushings to resist off center load distortions. Two large diameter studs secure the mast to the drive units. Drive Units Two Crown-manufactured independent double reduction planetary gear drives offer 27 to 1 gear reduction. The first and second reduction use helical gears for low noise and efficiency. The drive unit gears are splash lubricated in an oil bath. Carriage An ITA Class II carriage is standard. An optional hook type ITA sideshifter or other attachments are easily added. Optional fork lengths are available. You can count on Crown to build lift trucks designed for safe operation, but that s only part of the safety equation. Crown encourages safe operating practices through ongoing operator training, safety-focused Other Options 1. Audible travel alarm 2. Flashing lights Safety considerations and dangers associated with audible travel alarms and flashing lights include: Multiple alarms and/or lights can cause confusion. Workers ignore the alarms and/or lights after day-in and day-out exposure. Operator may transfer the responsibility for looking out to the pedestrians. Annoys operators and pedestrians. Other Options Available Contact your local Crown dealer. and performance data given may vary due to manufacturing tolerances. Performance is based on an average size vehicle and is affected by weight, condition of truck, how it is equipped and the conditions of the operating area. Crown products and specifications are subject to change without notice. Crown Equipment Corporation New Bremen, Ohio 45869 USA Tel 419-629-2311 Fax 419-629-3796 crown.com Because Crown is continually improving its products, specifications are subject to change without notice. Crown, the Crown logo, the color beige, the Momentum symbol, Access 1 2 3, InfoLink, InfoPoint, e-gen, FlexRide, Intrinsic Stability System and Work Assist are trademarks of Crown Equipment Corporation. supervision, maintenance and a safe working environment. Go to crown.com and view our safety section to learn more. Copyright 2007-2018 Crown Equipment Corporation SF14737 Rev. 02-18 Printed in U.S.A.