Screw-in Cartridge Valves For Industrial and Mobile Applications EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006 0-
Screw-in Cartridge Valves (SiCVs) Introduction For over seventy years, the Vickers brand has provided its customers with quality products and innovative solutions for all their power and motion control needs. The products featured in this catalog represent the very best in screw-in cartridge valve technology. Eaton is committed to maintaining this position by offering the most comprehensive range of cartridge valves for stationary and on/off highway equipment. This catalog gives detailed specifications for the entire line of Vickers screw-in cartridge valves. Its purpose is to provide a quick, convenient reference tool when choosing cartridge valves or designing a system using these components. It is divided into sections according to valve function. Features and Benefits Vickers screw-in cartridge valves provide many advantages over traditional hydraulic valves. While offering the same control functions as traditional hydraulic valves, screw-in cartridge valves are compact, reliable, and economical. The concept of combining multiple cartridge valves in a common manifold offers both the mobile and industrial user substantial cost-saving advantages that cannot be achieved with traditional valving. Here are some of the advantages of Eaton-Vickers cartridge valves: Response times and efficiency gains, by eliminating many of the hoses, tubes and fittings necessary in traditional installations Fewer potential leakage points than with conventional valves ensuring cleaner, safer application environments Compact and neat assemblies for economy of space and weight Increased ability to withstand vibration, giving optimum machine reliability and performance Multiple mounting configurations offers maximum design flexibility Greater contamination tolerance Faster cycle times Lower noise levels Faster on-sight servicing and troubleshooting Resistance to fluid contamination Hardened ground steel operating parts Modular Circuit Designs Modular Circuit Designs (MCDs) are valve packages containing combinations of screw-in cartridge valves in a manifold block. The package is dedicated to the hydraulic control of a particular application. MCDs can be as extensive as necessary to meet the most complex applications or as simple as two or three cartridges in a basic single manifold. All MCD packages are designed and manufactured by Eaton to customer specifications. Manifolds can be designed to hold the requisite cartridges, pilot pistons, orifice discs, or any other components needed for individual applications and integrated with other Eaton components. Standard cavity tooling provides precision machining of standard cartridge cavities. Global Support Eaton s world-wide distribution and service network is quick, reliable, and responsive to the customer s needs. Our customers can rest assured that no matter where they re located, Eaton will be there with unrivaled products and technical expertise. Technical Support Quality products are only part of Eaton s commitment to our customers. We also provide advisory, planning and design services specifically geared to your application and backed by on-time delivery. 0- EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006
Modular Circuit Designs High erformance in one compact, efficient package Customized Solutions from a Single Source Eaton is a major supplier of Modular Circuit Design (MCD) manifold block systems. Application and use of MCD packages has spread across virtually every market and is a major growth area increasing at a rate to times the growth rate for the rest of the hydraulics industry. Market trend forces are fueling growth away from line mounted valves to Market Trends Low Initial Installed Cost High Line- Mounted Valves High Sub-plate Mounted Valves Operating Costs subplate mounted valves to, ultimately, MCD Manifold Valve Systems. Operating costs - reduced complexity, elimination of leakage, and improved serviceability - as well as initial installed cost factors - compact size, lower purchase cost, reduced customer engineering, fewer component parts and a higher level of integration - are contributing to this trend. MCD / SiCV Manifold Low No Leaks, No Lines Vickers MCD packages are created to meet specific circuit or installation requirements where two or more valves are required. The valves are packaged by hydraulic product suppliers, or OEMs, into either aluminum or steel blocks instead of using traditional cast iron individual in-line valve bodies. This permits the creation of compact, leak-free valve control system packages while eliminating the cost and time to connect the valves together with lines and fittings. This capability satisfies many application requirements where available space for hydraulic components is limited. MCD packages are ideally suited for a quick and easy, low cost hydraulic circuit which has repetitive applications. This requirement actually led to the development of the screw-in cartridge valve (SiCV) concept. From Screw-in Cartridge Valves to Complete Systems SiCVs gained their initial market success and position in the agricultural equipment industry in the late 960s. SiCV technology rapidly spread from the traditional basic valve control functions of flow pressure and direction to many specialty valve control functions that were not always practical or economical in the traditional cast iron housing configuration. From these modest but demanding beginnings in the agricultural vehicle and implement markets, the concept of packaging two or more valves to form a unique control system and/or subsystem quickly spread into other cost sensitive high volume markets. Examples include aerial work platforms, lift trucks, road pavers, road rollers, concrete pavers, small construct equipment vehicles, and mining equipment. The Evolution of the MCD ackage This technology has evolved from labor intensive, costly line and subplate mounted components to compact leakfree MCD packages. Line Mounted Valves Mounted Sub-plate Mounted MCD ackage EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006 0-
Modular Circuit Designs High erformance in one compact, efficient package Better Results in Many Applications More industries are becoming aware of the advantages of MCD packages: Low installed cost Leak-free packaging Reduced hydraulic line clutter Smaller package size As awareness increases, usage of MCD packages is spreading to specialty vehicles and machines including paper cutting machines, newspaper printing presses, tree removal/planting vehicles, and utility trucks. As more and more MCD packages continue to appear in the marketplace the use has spread to encompass virtually every conceivable market where hydraulic systems can be applied. Trouble-free Installation and Troubleshooting The MCD package may be designed by Eaton or customers to satisfy specific performance or installation requirements. The key design feature is the combination of two or more control functions into a compact manifold block where internal passages eliminate the need for interconnecting lines and fittings between valves. The construction eliminates not only potential leakage points, but also the procurement, storage, handling and installation costs associated with traditional line mounted valve systems. The only lines and fittings required are those for the system inlet and return and the connections to the actuators being controlled. In addition, the MCD is a complete package with no time or procurement problems to complete the installation of the circuit due to the possible shortage of one or more valves. Conveniently located SICVs in a single manifold block provide faster field servicing and troubleshooting, maximizing machine utilization. Features and Benefits An efficient low maintenance system - the cartridge concept facilitates improved productivity from customized circuits Compact, unitized design - maximum savings on lines and fittings costs plus faster installation and system start up Fewer potential leakage points - ensure a cleaner, safer application environment Increase ability to withstand vibration - gives optimum machine reliability Faster response time and enhance efficiency - response time and power transmission efficiency gains by eliminating many of the hoses, tubes and fittings necessary in traditional installations Compact, neat assembly - provides space and weight savings Ability to manifold other valves such as Vickers Directional Controls DG valves & CMX valves - provides increased systems flexibility to control multiple and diverse actuators Components sourced from a single supplier - simplifies procurement processing and reduces acquisition costs 0- EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006
Aluminum and steel manifold packages with direct port STC connections Design Features Benefits STC orts in action ositive round-wire style latching mechanism Swivels for installation, (in absence of pressure) Low profile, compact design Elastomeric o-ring seal available in many materials Dual purpose dust seal/release sleeve Simple stamped release tool for disconnecting Fast reliable one-hand STC connections requiring no assembly tools Easy installation in confined areas Eliminates cross-threading, over-or undertorquing, and hose twisting Resists loosening when vibration is present Zero leak performance per SAE J76 Repairable seals for increased useful life Direct porting eliminates adapters to maximize cost savings Resists external contamination Design allows easy disconnection with release tool Ease of assembly for MCDs with multiple ports in tight spaces Zinc plated steel construction STC Hose/Connector STC ort How to Use STC STC Assembly Action Note Always remember to verify that your STC connection has been made successfully by pulling the connection. The proper connection and disconnection of STC is outlined in Bulletin JA55E. Male connector is inserted into the female connector. The male shoulder spreads the latch ring open. As the STC tool is inserted behind the release sleeve, the steel insert pushes the latching ring forward into a groove in the female half I.D., thus allowing the two halves to be pulled apart. The thickness of the tool moves the sleeve forward far enough to disconnect, so prying sideways with the tool is unnecessary. Latch ring is in its open position which allows the male shoulder to slide past the latch ring. Male and female are locked into place. As fluid pressure is applied, the latch ring is wedged between the male shoulder and the female angle. EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006 0-5
Screw-in Cartridge Valves Contents INTRODUCTION/VALVE LOCATORS - Section 0 Modular circuit designs (MCD)... 0- Valve Locator Solenoid valves... 0-8 Directional controls... 0- roportional controls... 0- ressure controls... 0-6 Flow controls... 0-8 Check valves... 0-0 Logic elements... 0- Load controls... 0- Circuit makers... 0- SOLENOID VALVES - Section A Section overview... A- -way, -position, normally closed... A-6 -way, -position, normally open... A-50 -way, -position... A-88 -way, -position... A-06 -way, -position... A-6 Multi-functional Valves...A-8 Slip-in pilot -way -position... A-50 Manual override options...a-5 ROORTIONAL VALVES - Section B Section overview... B- roportional flow controls, poppet type... B- roportional flow controls, spool type... B- roportional pressure relief... B- roportional pressure reducing/relieving... B-0 Slip-in pilot control valves...b-8 COILS AND ELECTRONIC CONTROLS - Section C Coils S series, ToughCoil... C-5 series, ToughCoil... C-5 J series, ToughCoil... C-6 H series, ToughCoil... C-6 R & L series coils...c-0 Explosion proof valve options... C- EV proportional valve coils... C- EFV proportional valve coils... C- Valve Drivers ower plugs for proportional valves... C-5 Soft switch power plugs... C- DIRECTIONAL CONTROLS - Section D Section overview... D- Manual rotary valves, -way... D- Manual rotary valves, -way... D-8 Shuttle valves... D-8 Hot oil shuttle valves... D-6 Manual pull valves... D-0 Manual push valves...d- ilot to shift valves, -way (single pilot)... D-8 ilot to shift valves, -way (single pilot)... D-76 ilot to shift valves, -way (dual pilot)... D-78 RESSURE CONTROLS - Section E Section overview... E- Relief Valves oppet type, 8 size... E- Differential area, 8 size... E-6 Ball Type, 0 size...e-8 oppet type, 0 size... E-0 Differential area, 0 size... E- ilot operated, 0 size... E-8 Thermal relief with check... E- Crossover relief...e- ilot operated, size... E-6 Differential area, 6 size... E-8 ilot operated, 6 size... E-0 ilot operated, ventable, size... E- ressure Reducing/Relieving Valves Direct acting... E- ilot operated... E-6 ressure Sequence Valves Direct Acting External pilot, internal drain... E-6 Internal pilot, external drain, with vent... E-5 Internal or external pilot/drain... E-58 Internal pilot, external drain, without vent... E-60 External pilot, external drain, N/O... E-6 External pilot, external drain, N/C... E-6 ilot Operated Internal pilot, external drain, size... E-66 Internal pilot, external drain, with vent 6 size... E-68 Special Functions ilot unloading... E-70 Accumulator discharge... E-7 CONTROLS - Section F Section overview... F- Flow regulator valves, fixed, pressure compensated... F- Flow regulator valves, adj., pressure compensated... F- riority flow regulators (bypass type, fixed)... F- riority flow regulators (bypass type, adjustable)... F-8 Static and dynamic signal priority valves... F- Manual rotary flow control cartridges... F-8 Needle valve cartridges... F- Flow control cartridges... F-50 Velocity fuse cartridges... F-56 Flow divider/combiner valves... F-6 osi-traction valves... F-7 CHECK VALVES - Section G Section overview... G- Check valves, -way... G- Check valves, with bypass orifice... G-0 Restrictive check valves... G- Single O check valves, cartridge... G-6 Single O check valves, housing type... G-0 Single O check valves, cartridge (high pressure)... G-6 Double pilot check valves, cartridge... G-0 Double pilot check valves, housing type... G- LOAD CONTROLS - Section H Section overview and application notes... H- Functional symbols... H-5 0-6 EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006
Counterbalance valves... H-6 Vented counterbalance valves... H-0 Motion Control valves... H- Dual Motion Control valve...h-8 Dual Motion Control valve with Loadlock...H-0 LOGIC ELEMENTS - Section I Section overview... I- Application Examples ressure control functions... I- Flow control functions... I-6 Directional control functions... I-9 Three-way bridge/four-way bridge... I-0 Differential pressure sensing valves... I- Spool type functional symbols... I-0 oppet type functional symbols... I- ressure compensators, restrictive type... I- ressure compensators, bypass type... I-0 HOUSINGS AND MISC. ARTS - Section J Section Overview... J- Standard Housings C-**-... J- C-**-/S... J-6 C-**-... J- C-**-5S... J- ort dimensions... J-5 Special Housings art numbers - CBV, OC, VCB housings... J-5 Dimensions - 0 size CBV, OC housings... J-8 Dimensions - size CBV, OC housings... J- Dimensions - 0 size VCB housings... J-5 Dimensions - size VCB housings... J-7 Bolt on manifold for Eaton motors... J-9 Cavity plugs... J-6 Orifice Discs and Orifice Sizing Orifice discs... J-0 Orifice sizing charts... J- Miscellaneous arts ilot pistons... J- Sense check and panel mount adapter... J- Miscellaneous parts/adjustment kits... J-5 CIRCUIT MAKERS - Section K Section overview... K- Flow control packages... K- Flow control package with free reverse flow... K- ump control manifolds... K-0 riority flow control with relief on priority flow port... K-8 Solenoid actuated relief valves... K- Cross port relief valves... K- ressure sensitive regen. valve... K-8 ressure sensitive regen. valve w/load locking... K-5 Cross port relief with shuttle and solenoid vent... K-56 SANDWICH VALVES - Section L Application guidelines, ordering information... L- Spare parts & accessories... L-5... L-6 Model code detail for housings with two valves... L-0 Housing dimensions... L-5 TECHNICAL REFERENCE - Section M General guidelines on manifold block design... M- Standard material sizes... M-5 referred tooling for machining custom manifolds...m-6 Torque specifications...m-8 ort dimensions - SAE & BS...M-9 ort dimensions - short ports...m-0 Cavity...M- Machining recommendations...m- Cavity dimensions...m- INDEX BY MODEL CODE - Section N VALVE LOCATOR SOLENOID VALVES ROORTIONAL VALVES COILS & ELECTRONIC CONTROLS DIRECTIONAL CONTROLS RESSURE CONTROLS CONTROLS CHECK VALVES LOAD CONTROLS LOGIC ELEMENTS HOUSING & MISCELLANEOUS ARTS CIRCUIT MAKERS SANDWICH VALVES TECHNICAL REFERENCE INDEX 0 A B C D E F G H I J K L M N EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006 0-7
Solenoid Valves -way, -position normally closed oppet type, pilot operated (restricted reverse flow when energized) L/min (USgpm) bar (psi) SV5-8-C/CM* C-8- (6) 0 (000) A-6 SV5-8-C/CM* C-8-7 (0) 50 (5000) A-8 SV-0-C/CM*/CR* C-0-5 () 0 (000) A- SV-0-C/CM*/CR* C-0- (6) 0 (000) A-0 SV-0-C/CM* C-0-5 () 50 (5000) A-6 SV-0-C/CM* C-0- (6) 50 (5000) A- Spool type, direct acting L/min (USgpm) bar (psi) SV-8-C/CM* C-8- () 0 (000) A- SV-8-C/CM* C-8- () 50 (5000) A- SV-0-C/CM*/CR* C-0- (6) 0 (000) A-6 SV-0-C/CM* C-0- (6) 50 (5000) A-8 oppet type, pilot operated L/min (USgpm) bar (psi) SV-0-C/CM*/CR* C-0-5 () 0 (000) A- SV-0-C/CM* C-0-5 () 50 (5000) A-6 SV--C/CM*/CR* C-- (0) 0 (000) A-8 C---U SV--C/CM* C-- (0) 50 (5000) A-0 SV-6-C/CM*/CR* C-6- (5) 0 (000) A- SV-6-C/CM* C-6- (5) 50 (5000) A-6 SV-0-C/CM*/CR* C-0-7 (60) 0 (000) A-8 SV-0-C/CM* C-0-7 (60) 50 (5000) A-0 Explosion proof, CSA Approved, coil option available (see page C-) *M = Manual override, * = ush type manual override, *S = Screw type manual override, *R = ull type manual override 0-8 EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006
Solenoid Valves (cont.) 0 Bi-directional, -way, -position normally closed -way, -position normally open oppet type, direct acting L/min (USgpm) bar (psi) SBV-8-C C-8-,0 (0,5) 50 (5000) A- oppet type, pilot operated SBV-8-C C-8-60 (5) 50 (5000) A-0 SBV-0-C C-0-76 (0) 50 (5000) A-8 SBV--C C-- (0) 50 (5000) A- C--U MODEL CAVITY RATING RESSURE AGE oppet type, pilot operated L/min (USgpm) bar (psi) SV5-8-O/O*/OS* C-8- (6) 0 (000) A-50 SV5-8-O/O*/OS* C-8-7 (0) 50 (5000) A-5 SV5-0-O/O*/OS* C-0-5 () 0 (000) A-60 SV5-0-O/O*/OS* C-0-5 () 50 (5000) A-6 Spool type, direct acting L/min (USgpm) bar (psi) SV-8-O/OM* C-8- () 0 (000) A-80 SV-8-O/OM* C-8- () 50 (5000) A-8 SV-0-O/OM*/OR* C-0- (6) 0 (000) A-8 SV-0-O/OM* C-0- (6) 50 (5000) A-86 Spool type, pilot operated L/min (USgpm) bar (psi) SV-0-O/O*/OS* C-0-5 () 0 (000) A-56 SV-0-O/O*/OS* C-0-5 () 50 (5000) A-58 SV--O/O*/OS* C-- (0) 0 (000) A-66 C--U SV--O/O*/OS* C-- (0) 50 (5000) A-68 C--U SV-6-O/O*/OS* C-6- (5) 0 (000) A-7 SV-6-O/O*/OS* C-6- (5) 50 (5000) A-7 SV-0-O/O*/OS* C-0-7 (60) 0 (000) A-76 SV-0-O/O*/OS* C-0-7 (60) 50 (5000) A-78 Solenoid Operated Relief Valve L/min (USgpm) bar (psi) SRV- C-- (0) 50 (600) A-8 Explosion proof, CSA Approved, coil option available (see page C-) *M = Manual override, * = ush type manual override, *S = Screw type manual override, *R = ull type manual override EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006 0-9
Solenoid Valves (cont.) Bi-directional, -way, -position normally open -way, -position oppet type, pilot operated L/min (USgpm) bar (psi) SBV-8-O C-8-60 (5) 50 (5000) A-5 SBV-0-O C-0-76 (0) 50 (5000) A-6 SBV--O C-- (0) 50 (5000) A-70 C--U Spool type, direct acting L/min (USgpm) bar (psi) SV-8-/M* C-8- () 0 (000) A-88 SV-8-/M* C-8- () 50 (5000) A-90 SV-0-/M*/R* C-0- (6) 0 (000) A-9 SV-0-/M* C-0- (6) 50 (000) A-96 SVA/B-- C-- () 0 (000) A-00 Flow port to port not to exceed 0 L/min (.5 USgpm) Spool type, direct acting L/min (USgpm) bar (psi) SVA/B-- C-- 8 (0) 0 (000) A-0 Spool type L/min (USgpm) bar (psi) SV-8-/M* C-8- () 0 (000) A-9 SV-0-/*/S* C-0- (6) 0 (000) A-98 SVA/B-- C-- () 0 (000) A-0 ort must be vented to tank. Tank pressure not to exceed,7 bar (00 psi) Spool type, direct acting, pilot operated L/min (USgpm) bar (psi) 78 Series 80_0,8 (0.5) 00 (50) A-50 -way, -position Spool type, direct acting L/min (USgpm) bar (psi) SV-8-/M* C-8- () 0 (000) A-06 SV-8-/M* C-8- () 50 (5000) A-08 SV-0-/M*/R* C-0- (6) 0 (000) A- SV-0-/M* C-0- (6) 50 (5000) A-6 Spool type, direct acting L/min (USgpm) bar (psi) SV-8-/M* C-8- () 0 (000) A-0 SV-8-/M* C-8- () 50 (5000) A- SV-0-/M*/R* C-0- (6) 0 (000) A-8 SVA/B-- C-- 5 () 0 (000) A-8 Spool type L/min (USgpm) bar (psi) SV-0-/M*/R* C-0- (6) 0 (000) A-0 SVA/B-- C-- 5 () 0 (000) A-0 Explosion proof, CSA Approved, coil option available (see page C-) *M = Manual override, * = ush type manual override, *S = Screw type manual override, *R = ull type manual override 0-0 EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006
Solenoid Valves (cont.) 0 -way, -position Spool type, selector valve L/min (USgpm) bar (psi) SV-0-/M*/R* C-0- (6) 0 (000) A- Spool type, selector valve L/min (USgpm) bar (psi) SV5-0-/M*/R* C-0- (6) 0 (000) A- SV5A/B-- C-- 5 () 0 (000) A- Spool type L/min (USgpm) bar (psi) SV7-0-/*/S* C-0-7 (5) 0 (000) A-6 SV7A/B-- C-- 6 () 0 (000) A- -way, -position Spool type L/min (USgpm) bar (psi) SV9-8-A/AM C-8- (.5) 0 (000) A-6 SV9-0-A/AM C-0-9 (5) 0 (000) A- Spool type L/min (USgpm) bar (psi) SV9-8-B/BM C-8- (.5) 0 (000) A-7 SV9-0-B/BM C-0- (6) 0 (000) A- Spool type L/min (USgpm) bar (psi) SV9-8-E/EM C-8- (.5) 0 (000) A-8 SV9-0-E/EM C-0- (6) 0 (000) A- Spool type L/min (USgpm) bar (psi) SV9-8-F/FM C-8- (.5) 0 (000) A-9 SV9-0-F/FM C-0- (6) 0 (000) A-5 Explosion proof, CSA Approved, coil option available (see page C-) *M = Manual override, * = ush type manual override, *S = Screw type manual override, *R = ull type manual override EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006 0-
Directional Controls Manually operated ull-to-open, -way, position L/min (USgpm) bar (psi) MV-0 C-0-5 () 0 (000)* D-0 MV-0 (detent) C-0-5 () 0 (000)* D- Manual rotary, -position detent L/min (USgpm) bar (psi) MRV-0-D/E C-0- (6) 0 (000)* D- MRV-6-D C-6-6 (7) 0 (000)* D-6 Manual rotary, -position detent L/min (USgpm) bar (psi) MRV-0-D/E C-0- (6) 0 (000)* D- MRV-6-D C-6-6 (7) 0 (000)* D-6 ush-to-open, -way, position L/min (USgpm) bar (psi) MSV- C-- () 0 (000) D- ush-to-open, -way, position L/min (USgpm) bar (psi) MSV- C-- 8 (0) 0 (000) D-6 ush-to-open, -way, position L/min (USgpm) bar (psi) MSV- C-- 5 () 0 (000) D-0 ush-to-open, -way, position L/min (USgpm) bar (psi) MSV- C-- 5 () 0 (000) D- ush-to-open, -way, position L/min (USgpm) bar (psi) MSV5- C-- () 0 (000) D-8 ush-to-open, -way, position L/min (USgpm) bar (psi) MSV6- C-- 5 () 0 (000) D- ush-to-open, -way, position L/min (USgpm) bar (psi) MSV7- C-- 5 () 0 (000) D-6 0- EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006
Directional Controls (cont.) Manually operated MODEL CAVITY RATING RESSURE AGE Manual rotary, -way L/min (USgpm) bar (psi) MRV-0-K C-0- () 0 (000) D-8 MRV-6-K C-6-5 () 0 (000) D-0 0 Manual rotary, -way, -position detented L/min (USgpm) bar (psi) MRV5-0-D/E C-0- () 0 (000) D- MRV5-6-D C-6-5 () 0 (000) D- ilot operated 5 Manual rotary, -way, -position detented L/min (USgpm) bar (psi) MRV6-0-D/E C-0- () 0 (000) D-6 Manual rotary, -way, -position detented L/min (USgpm) bar (psi) MRV-0-D/E C-0- () 0 (000) D-8 MRV-6-D C-6-5 () 0 (000) D-0 * Indicates that these models are available for use above 0 bar (000 psi). However, caution should be taken and a review of the application may be necessary prior to use. Contact your Eaton sales engineer. External pilot, internal drain, way, position L/min (USgpm) bar (psi) TS6-0 C-0- (6) 0 (000) D-7 External pilot, atmospheric vent, way, position L/min (USgpm) bar (psi) TS7-0 C-0-0 (8) 0 (000) D-76 External pilot, atmospheric vent, way, position L/min (USgpm) bar (psi) TS-0 C-0-0 (8) 0 (000) D-8 TS-6 C-6- (5) 0 (000) D-50 TS-0 C-0-65 (70) 0 (000) D-5 External pilot, internal drain, way, position L/min (USgpm) bar (psi) TS-0 C-0-0 (8) 0 (000) D-5 TS-6 C-6- (5) 0 (000) D-56 TS-0 C-0-65 (70) 0 (000) D-58 External pilot, internal drain, way, position L/min (USgpm) bar (psi) TS-0 C-0-0 (8) 0 (000) D-60 TS-6 C-6- (5) 0 (000) D-6 TS-0 C-0-65 (70) 0 (000) D-6 External pilot,, atmospheric vent, way, position L/min (USgpm) bar (psi) TS-6 C-6- (5) 0 (000) D-66 EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006 0-
Directional Controls (cont.) ilot operated External pilot, internal drain, way, position L/min (USgpm) bar (psi) TS5-0 C-0- () 0 (000) D-68 External pilot, atmospheric vent, way, position L/min (USgpm) bar (psi) TS5-6 C-6- (5) 0 (000) D-70 External pilot, internal drain, way, position L/min (USgpm) bar (psi) TS6-6 C-6- (5) 0 (000) D-7 5 Manually operated closed center version Junction formed by the housing cavity open center version roportional Controls Junction formed by the housing cavity Electrohydraulic pressure reducing/relieving () (R) (T) Dual External pilot, way, position L/min (USgpm) bar (psi) TS9-8 C-8-5S 9 (5) 80 (000) D-78 TS9-0 C-0-5S 8 (0) 80 (000) D-80 TS9- C--5S 76 (0) 80 (000) D-8 TS9-6 C-6-5S 5 (0) 80 (000) D-8 TS9-0 C-0-5S 8 (60) 80 (000) D-86 Direct acting, ball type L/min (USgpm) bar (psi) DSV- C-- (0.75) 0 (500) D-8 DSV-8 C-8- (6) 0 (500) D-0 DSV-0 C-0- (6) 0 (000) D- DSV-6 None () 50 (5000) D- DSV-8 None 5 (7) 50 (5000) D- DSV- None 90 () 50 (5000) D- DSV-6 None 70 (5) 50 (5000) D- Spring centered, hot oil shuttle valve with closed or open center L/min (USgpm) bar (psi) DSV-0-C/O C-0-6 (7) 50 (5000) D-6 DSV-6-C/O C-6-90 (50) 50 (5000) D-8 Electrically operated, sliding spool type L/min (USgpm) bar (psi) ERV-8 C-8-7,6 (.0) 5 (500) B-0 0- EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006
roportional Controls Electrohydraulic pressure reducing/relieving 0 R Internal pilot, spool type L/min (USgpm) bar (psi) ERV-0 C-0-8 () 5 (500) B- ERV-0 C-0-0 (8) 0 (000) B- ERV-6 C-6-8 (0) 5 (500) B-6 T Electrohydraulic proportional relief Direct acting L/min (USgpm) bar (psi) ERV-0 C-0- (0.8) 0 (000) B- L/min (USgpm) bar (psi) ERV-0 C-0-0,8 (0.0) 0 (000) B- Electrohydraulic proportional flow regulator -stage, pilot operated L/min (USgpm) bar (psi) ERV-0 C-0- -57 (-5) 0 (000) B-6 ERV-6 C-6-8- (-5) 0 (000) B-8 -way, proportional, normally closed L/min (USgpm) bar (psi) EV0 C-0-0-0 (0-8) 50 (5000) B- Nose in, side out L/min (USgpm) bar (psi) EV6-A C-6-S (modified) 0-60 (0-) 80 (000) B-8 Side in, nose out L/min (USgpm) bar (psi) EV6-B C-6-S (modified) 0-60 (0-) 80 (000) B-8 MODEL CAVITY RATING RESSURE AGE Direct acting L/min (USgpm) bar (psi) EFV-0*-C C-0-8 (0) 0 (000) B-7 EFV-*-C C-- 77 (0) 0 (000) B- L/min (USgpm) bar (psi) EFV-*-C C-- (0) 0 (000) B-9 Direct acting L/min (USgpm) bar (psi) EFV-0*-O C-0-8 (0) 0 (000) B- EFV-*-O C-- 0 (7.5) 0 (000) B-0 Side in, nose out L/min (USgpm) bar (psi) EFV-*-0 C-- (0) 0 (000) B-6 EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006 0-5
ressure Controls Electrohydraulic proportional flow regulator ressure reducing/relieving Slip-in ilot Control Valves L/min (USgpm) bar (psi) 758 Series Flow Regulator 0 (.6) 00 (50) B-8 758 Series ressure Regulator 0 (.6) 00 (50) B-50 Direct acting, reducing & relieving L/min (USgpm) bar (psi) RV-0 C-0-5 () 65 (00) E- ilot operated RV-0 C-0-8 (0) 0 (500) E-6 RV-0 C-0-5 () 50 (5000) E-8 RV- C-- (0) 50 (5000) E- RV-6 C-6-5 (0) 50 (5000) E- ilot operated, reducing only L/min (USgpm) bar (psi) RV- C-- (0) 50 (5000) E-0 ressure sequence valves External pilot, sliding spool direct acting L/min (USgpm) bar (psi) SV-8 C-8- (6) 0 (000) E-6 SV-8 C-8-5 () 50 (5000) E-8 External pilot, internal drain, direct acting L/min (USgpm) bar (psi) SV-0 C-0- (6) 65 (00) E-50 SV-0 C-0-5 () 80 (5500) E-5 Internal pilot, external drain, direct acting L/min (USgpm) bar (psi) SV7-0 C-0- (6) 5 (800) E-60 Internal pilot, direct acting L/min (USgpm) bar (psi) SV-0 C-0- (6) 65 (00) E-58 Internal pilot, direct acting L/min (USgpm) bar (psi) SV-0 C-0- (6) 65 (00) E-5 SV5-0 C-0-8 () 80 (5500) E-56 Internal pilot, pilot operated L/min (USgpm) bar (psi) SV-6 C-6-95 (5) 5 (6000) E-68 0-6 EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006
ressure Controls (cont.) 0 ressure sequence valves External pilot, external drain, direct acting L/min (USgpm) bar (psi) SV8-0 C-0- (6) 65 (00) E-6 External pilot, external drain, direct acting L/min (USgpm) bar (psi) SV0-0 C-0- (6) 65 (00) E-6 ressure unloading valve Accumulator discharge valve ilot operated, external pilot, spool-type, adjustable L/min (USgpm) bar (psi) SV- C--S (0) 50 (5000) E-66 Internal pilot, cartridge-type L/min (USgpm) bar (psi) UV-0 C-0- () 0 (000) E-70 External pilot to close (00: ratio) L/min (USgpm) bar (psi) ADV-6 C-6-S 0 (8) 0 (000) E-7 Relief valves oppet, direct acting L/min (USgpm) bar (psi) RV-8 C-8-5 () 50 (5000) E- RV-0 C-0-0 (8) 0 (000) E- Low flow, ball type RV6-0 C-0-5 () 50 (5000) E-8 oppet,low pressure, direct acting RV0-0 C-0-8 (0) 70 (000) E-0 oppet, differential area L/min (USgpm) bar (psi) RV8-8 C-8-0 (8) 50 (5000) E-6 RV8-0 C-0-76 (0) 50 (5000) E-6 RV-0 C-0-76 (0) 50 (600) E- RV-6 C-6-0 (80) 50 (5000) E-8 EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006 0-7
ressure Controls (cont.) Relief valves Spool, pilot operated L/min (USgpm) bar (psi) RV5-0 C-0- (0) 50 (5000) E-8 RV- C-- 90 (50) 50 (5000) E-6 C--U RV5-6 C-6-0 (80) 50 (5000) E-0 MODEL CAVITY RATING RESSURE AGE oppet, pilot operated, free reverse flow L/min (USgpm) bar (psi) RV-0 C-0- (0) 50 (5000) E-0 oppet type, direct acting, thermal relief check valve L/min (USgpm) bar (psi) RV-0 C-0-5 () 50 (5000) E- Vented spool, pilot operated L/min (USgpm) bar (psi) VRV- C--S (0) 0 (000) E- Cross over relief valve L/min (USgpm) bar (psi) CRV-0 C-0-95 (0) 0 (000)* E- Flow Controls Flow restrictors, knob/lever operated Flow restrictors, adjustable Manual rotary L/min (USgpm) bar (psi) MRV-0-K C-0-60 (5) 0 (000) F-8 MRV-0-B/E/D/L C-0-60 (5) 0 (000) F-8 MRV-6-K C-6-70 (5) 0 (000) F-0 MRV-6-B/E/D/L C-6-70 (5) 0 (000) F-0 Needle valve L/min (USgpm) bar (psi) NV-8 C-8-5 () 50 (5000) F- NV-0 C-0-5 () 0 (000) F- 0-8 EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006
Flow Controls (cont.) 0 Flow restrictors, adjustable Needle valve, restricted reverse flow L/min (USgpm) bar (psi) NV-6 C-6-5 (0) 0 (000) F-6 NV-0 C-0-65 (70) 0 (000) F-8 Needle type with reverse flow check L/min (USgpm) bar (psi) FCV7-0-FF C-0-5 () 0 (000) F-50 Slotted spool with reverse flow check FCV7-0-(0) C-0-6,6 (.75) 0 (000) F-50 FCV7-0-(0) C-0- (.75) 0 (000) F-50 FCV7-0-(0) C-0-7 (7.5) 0 (000) F-50 Needle type L/min (USgpm) bar (psi) FCV7-0-(NV) C-0-5 () 0 (000) F-50 FCV- C-- (0) 50 (5000) F-5 C--U FCV6-6 C-6-08 (55) 0 (000) F-5 Needle type, fine adjustable FCV7-0-(NVF) C-0-8 (0) 0 (000) F-50 Flow regulators (pressure compensated) Two way, pre-set flow L/min (USgpm) bar (psi) FR5-8 C-8-0 (.5) 50 (5000) F- FR5-0 C-0- (6) 50 (5000) F-6 FR-6 C-6- (0) 0 (000) F-8 FR-0 C-0-7 (60) 0 (000) F-0 (pressure compensated) Two-way, adjustable flow regulator L/min (USgpm) bar (psi) FR-0 C-0-8 (0) 0 (000) F- FR-6 C-6- (0) 0 (000) F- Flow regulators ressure compensated flow regulator L/min (USgpm) bar (psi) FAR-0 C-0- - 8 (5-0) 50 (5000) F-6 FAR- C--,5-9,5 (0, - 5) 50 (5000) F-8 C--U FAR-6 C-6-,8-5, (.0-.0) 50 (5000) F-0 EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006 0-9
Flow Controls (cont.) Flow regulators MAX MAX REG. INLET MODEL CAVITY RESSURE AGE -way priority flow regulator (fixed setting) L/min (USgpm) bar (psi) FR5-8 C-8-0 (.5) 5 () 50 (5000) F- FR5-0 C-0- (6) 60 (5) 50 (5000) F- FR-6 C-6- (0) 5 (0) 0 (000) F-6 MAX MAX REG. INLET MODEL CAVITY RESSURE AGE -way priority flow regulator L/min (USgpm) bar (psi) 50% adjustable FR-0 C-0-8 (0) 60 (5) 0 (000) F-8 FR-6 C-6- (0) 5 (0) 0 (000) F-0 Dynamic Signal (FRD) L/min (USgpm) bar (psi) FRD- C--5S 76 (0) 80 (000) F- FRD-6 C-6-5S 50 (0) 80 (000) F- FRD-0 C-0-5S 0 (60) 0 (500) F-6 Static Signal (FRS) FRS- C--5S 76 (0) 80 (000) F- FRS-6 C-6-5S 50 (0) 80 (000) F- FRS-0 C-0-5S 0 (60) 0 (500) F-6 Flow dividers Velocity fuses (pipe break valve) Fusing direction Check Valves Direct operated Reverse flow direction Flow divider/combiner L/min (USgpm) bar (psi) FDC-0 C-0-68 (8) 0 (000) F-6 FDC-0 C-0-9.5-8 (.5-0) 50 (5000) F-6 FDC-6 C-6-78 (7) 0 (000) F-66 FDC-6 C-6-8-5 (-0) 50 (5000) F-68 FDC-0 manifold 78 (00) 0 (000) F-70 osi-trachon valve FDC-0 C-0-68 (8) 0 (000) F-7 FDC-0 C-0-9-8 (5-0) 50 (5000) F-7 FDC-6 C-6-78 (7) 0 (000) F-76 FDC-6 C-6-57-5 (5-0) 50 (5000) F-78 FDC-0 manifold 567 (50) 0 (000) F-80 Factory set L/min (USgpm) bar (psi) VF-0 C-0- (6) 0 (000) F-56 VF-6 C-6- (0) 0 (000) F-58 VF-0 C-0-7 (60) 0 (000) F-60 Direct acting, poppet type L/min (USgpm) bar (psi) CV- C-- 8 () 50 (5000) G- CV-8 C-8-0 (8) 50 (5000) G-6 CV-0 C-0-5 () 0 (000) G-8 CV-0 C-0-5 () 50 (5000) G-8 CV-0 C-0-76 (0) 0 (000) G-0 CV-0 C-0-76(0) 50 (5000) G-0 CV- C--, C--U (0) 50 (5000) G- CV-6 C-6-5 (0) 0 (000) G-6 CV-6 C-6-5 (0) 50 (000) G-6 CV-0 C-0-7 (60) 0 (000) G-8 0-0 EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006
Check Valves (cont.) 0 Direct operated Direct acting, poppet type L/min (USgpm) bar (psi) CV6-0 C-0-76 (0) 50 (5000) G- Direct acting, poppet type with orifice L/min (USgpm) bar (psi) CV6-0 C-0-76 (0) 50 (5000) G-0 CV6-6 C-6-5 (0) 0 (000) G- Direct acting, poppet type with stroke (flow) limiter L/min (USgpm) bar (psi) RCV-0 C-0-76 (0) 50 (5000) G- ilot operated, single acting ilot-to-open L/min (USgpm) bar (psi) SC-8 (: ratio) C-8-9 (5) 0 (500) G-6 SC-0 (: ratio) C-0- (6) 0 (000) G-8 SC-0 manifold 5 () 0 (000) G-0 SC-6 manifold 5 (0) 0 (000) G- SC 0 manifold 7 (60) 0 (000) G- ilot-to-open (: ratio) L/min (USgpm) bar (psi) OC-0 C-0-S 57 (5) 50 (5000) G-6 OC- C--S (0) 50 (5000) G-8 ilot operated, double acting C V V C Direct poppet : ratio manifold assembly L/min (USgpm) bar (psi) DC-0 5 () 0 (000) G- DC- (0) 50 (5000) G- DC-6 5 (0) 0 (000) G-6 DC-0 7 (60) 0 (000) G-8 Direct poppet : ratio, cartridge L/min (USgpm) bar (psi) DC-8 C-8-0 (8) 0 (500) G-0 EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006 0-
Logic Elements Differential pressure sensing Differential pressure sensing, spool type L/min (USgpm) bar (psi) DS-0 C-0-S 57 (5) 0 (500)* I- DS-** C--S (0) 0 (500)* I- DS-6 C-6-S 90 (50) 0 (500)* I-6 DS-0 C-0-S 0 (80) 0 (500)* I-8 Differential pressure sensing, poppet type L/min (USgpm) bar (psi) DS-0 C-0-S 57 (5) 50 (5000) I- DS-6 C-6-S 90 (50) 50 (5000) I-6 DS-0 C-0-S 0 (80) 50 (5000) I-8 s Spool type * Indicates that these models are available for use above 0 bar (500 psi). However, caution should be taken and a review of the application may be necessary prior to use. Contact your Eaton applications engineer. ** Only spool types available. DS-**-F DS-**- DS-**-R DS-**-V Spool, flow control, Spool, Spool, pressure reducing, Spool, normally normally open normally closed normally open closed oppet type DS-**-B DS-**-S DS-**-T oppet, vent to open, oppet, vent to open, oppet, bi-directional pilot to close, : ratio, normally closed normally closed normally closed ressure compensators, restrictive MODEL CAVITY RATING RESSURE AGE Compensator spool element, restrictive type L/min (USgpm) bar (psi) CS-0 C-0-8 (0) 0 (000) I- CS- C-- 58 (5) 0 (000) I- CS-6 C-6- (0) 0 (000) I-6 CS-0 C-0-89 (50) 0 (000) I-8 Compensator spool element, priority type L/min (USgpm) bar (psi) CS-0 C-0-8 (0) 0 (000) I-0 CS- C-- 58 (5) 0 (000) I- CS-6 C-6- (0) 0 (000) I- CS-0 C-0-89 (50) 0 (000) I-6 0- EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006
Load Controls 0 Counterbalance valves Counterbalance L/min (USgpm) bar (psi) CBV-0 (: ratio) C-0-S 60 (5) 50 (5000) H-6 CBV-0 (0: ratio) CBV- (: ratio) C--S (0) 50 (5000) H-8 CBV- (0: ratio) (C) (D) C (V) () Counterbalance with separate vent, : pilot ratio L/min (USgpm) bar (psi) VCB-0 C-0-60 (5) 50 (5000) H-0 C-0-U VCB- C-- (0) 50 (5000) H- C--U ilot V Inline housing type counterbalance, L/min (USgpm) bar (psi) MCV-6 (: ratio) manifold 5 (0) 0 (000)* H- MCV-0 (0: ratio) manifold 90 (50) 0 (000)* H-6 C C V Tank V Dual housing type counterbalance, with L/min (USgpm) bar (psi) anti-cavitation checks MCV-6 (: ratio) manifold 5 (0) 0 (000)* H-0 C V C V Dual Inline housing type counterbalance, L/min (USgpm) bar (psi) MCV-0 (0: ratio) manifold 90 (50) 0 (000)* H-8 * Indicates that these models are available for use above 0 bar (000 psi). However, caution should be taken and a review of the application may be necessary prior to use. Contact your Eaton applications engineer. Circuit Makers Screw-in cartridge valve package solutions MODEL RATING RESSURE AGE Cross port relief valve L/min (USgpm) bar (psi) CRV-0 76 (0) 7-0 (50-000) K- CRV-6 0 (80) 7-0 (50-000) K-6 REG. IN MODEL RATING RESSURE AGE Full range adjustable pressure compensated flow control package L/min (USgpm) bar (psi) FC- 6 (9) 0 (000) K- FC- 60 (5) 0 (000) K-6 FC- (0) 0 (000) K-8 FC- 90 (50) 0 (000) K-0 EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006 0-
Circuit Makers (cont.) Screw-in cartridge valve packages G G REG IN T Normally open riority flow Bypass Normally closed G T T MODEL RATING RESSURE AGE Full range adjustable pressure compensated flow control package with reverse free flow L/min (USgpm) bar (psi) FRC- 6 (9) 0 (000) K- FRC- 60 (5) 0 (000) K- FRC- (0) 0 (000) K-6 FRC- 90 (50) 0 (000) K-8 MODEL RATING RESSURE AGE Fixed priority flow control manifold L/min (USgpm) bar (psi) FRR-8 5 () 7-0 (00-000) K-8 FRR-0 60 (5) 7-0 (00-000) K-0 FRR-6 5 (0) 7-0 (00-000) K- MODEL RATING RESSURE AGE ump control manifold (normally closed) L/min (USgpm) bar (psi) CC- (0) 5-0 (75-000) K-0 CC-6 8 (60) 0-0 (50-000) K- MODEL RATING RESSURE AGE ump control manifold (normally open) L/min (USgpm) bar (psi) CC- (0) 5-0 (75-000) K- CC-6 8 (60) 0-0 (50-000) K-6 CR VR CR VR CH CH VH MODEL RATING RESSURE AGE ressure sensitive regenerative L/min (USgpm) bar (psi) RGV-0 60 (5) 0 (000) K-8 RGV- (0) 0 (000) K-50 MODEL RATING RESSURE AGE ressure sensitive regenerative L/min (USgpm) bar (psi) w/load locking RLV-0 60 (5) 0 (000) K-5 RLV- (0) 0 (000) K-5 V DR G V V V G Normally open G V V DR MODEL RATING RESSURE AGE Cross port relief w/shuttle L/min (USgpm) bar (psi) and solenoid vent SCR- (0) 0 (000) K-56 V V G Normally closed 0- EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006
Circuit Makers (cont.) 0 Screw-in cartridge valve packages MODEL RATING RESSURE VENTED AGE Solenoid actuated relief valve L/min (USgpm) bar (psi) bar (psi) SRV-8 (6) 0 (000) (60) K- SRV-0 60 (5) 0 (000) 7 (00) K-6 SRV- (0) 0 (000) 0 (50) K-8 SRV-6 5 (60) 0 (000) 8 (0) K-0 SRV-0 00 (80) 0 (000) 9 (5) K- G T G Normally closed G T Normally closed T Normally closed G T G Normally open G T Normally open T Normally open SRV-8 SRV-0 SRV- SRV-6 SRV-0 EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E January 006 0-5