Electromechanical Rotary Actuator TYPICAL APPLICATIONS Axis motion control for gimbal and pedestal systems Azimuth, elevation, fold / unfold, leveling control Suitable for airborne and ground based systems Model 25 FEATURES 1,4 lb-in peak torque Rugged design Assembly integrates: - High performance DC brushless motor - Resolver - Planetary gearbox - Power-off brake High output torque per volume or weight Low inductance for maximum dynamics Low mechanical backlash for precise positioning Supports high radial and axial loading BENEFITS Can be operated in limited rotation or full 3 continuous operation Mounting plate and output shaft can be modified for specific applications Use of brushless motor allows for higher peak torque and longer life as compared with a brush-type motor Rugged design and construction allows assembly to be operated under adverse environmental conditions Introducing Moog Components Group Model 25 Rotary Electromechanical Actuator that develops up to 14 lb-in of stall torque with a 48 VDC input at 25 C. It integrates a high performance brushless DC motor with Hall Effect devices, a highly accurate planetary gearbox, commutation resolver and power-off brake. Model 25 is designed to meet challenging environmental conditions, and can operate in both continuous and limited angle motion profiles. The spur gear output shaft can withstand heavy axial and radial forces, allowing the actuator to be adapted to a variety of applications. For more information about how this model can be tailored to your specific application, please contact our Business Development and Application Engineering departments. Moog Components Group www.moog.com/components 1 1
SPECIFICATIONS Performance and Environmental Characteristics Actuator Characteristics @ 25 C Typical Voltage 48 VDC Motor Commutation Hall Effect standard, resolver optional Torque Sensitivity 64 lb-in / amp ±1% BEMF Constant.78 V / rpm ±1% DC Resistance.93 OHMS ±12% Inductance 1.85 mh ±3% Max Winding 155 C Temperature Number of Poles 8 No Load Speed @ 48 VDC 61.1 rpm No Load Current @ 48 VDC < 75 ma (for motor only) Rated Speed 5 rpm Rated Torque 27 lb-in Rated Power 1 Watts Rated Current 4.6 amps Torsional Stiffness 13.3 lb-in / arcmin Backlash < 1 arcmin Output Shaft Radial Load 9 lbf maximum Output Shaft Axial Load 72 lbf maximum Brake Holding Torque 55 lb-in minimum Brake Current 33 ma Weight 8.5 lbs maximum Resolver Characteristics @ 25 C Input Voltage / Frequency 7 Vrms @ 5 KHz Input Current 7 ma maximum Input Power.31 W maximum Transformation Ratio ± 1%.5 Phase Shift 17 ±3 DC Resistance Rotor Stator 4 Ohms 77 Ohms Null Voltage 2 mv maximum Spur Gear Data Number of Teeth 24 Diameter Pitch 16 Pressure Angle 2 Pitch Diameter 1.5 AGMA Quality Class 1 Maximum TCE.1 Tooth-to-Tooth.5 Composite Error Center Distance Readings to.16 Be Within Nominal And Testing Pressure 32 oz ±1/2 Tooth Thickness at STD PD.982 Measurement Over Wires 1.65 (REF) Wire Diameter.18 Environmental Operating Temperature -4 C to +95 C Altitude 2, ft maximum Vibration MIL-STD-81F method 514.5 PROC 1 random -.4 G^2 / Hz; 2-2 Hz Shock Operational Bench Handling Transporation Humidity MIL-STD-81F method 516 2 GPK - 11 milliseconds, half sine MIL-STD-81F method 516.5 PROC VI MIL-STD-81F method 516.5 PROC IV 5-1% RH condensing 2 Moog Components Group www.moog.com/components
Performance Curves (@ 48 VDC and @ 25 C) 8 3 7 25 Actuator Speed (rpm), % Efficiency 5 4 3 2 2 15 1 Watts, Amps 1 5 2 4 8 1 12 14 Actuator Torque (lb-in) Speed-Torque Efficiency Rated Power Point Motor Current Power Out Note: Curves based on six step commutation Timing Diagram for Hall Switches (8 Pole) CCW Rotation DEGREES ELEC MECH 15 12 3 18 45 24 3 75 3 9 15 12 12 18 135 24 15 3 165 18 3 S1 OUT S2 OUT S3 OUT A COIL + + + + B COIL + + + + C COIL + + + + Motor and Field Director Schematic Moog Components Group www.moog.com/components 3 3
Typical Outline Dimensions are in inches Wiring Diagram Specifications and information are subject to change without prior notice. 215 Moog Inc. MS3151 8/15 4 Moog Components Group www.moog.com/components
Springfield Operations 75 West Sproul Road Springfield, PA 1964-484 United States Tel: +1-61-328-4 Fax: +1-61-5-6216 www.moog.com/components Email: mcg@moog.com Moog Components Group www.moog.com/components 5 5