Chrcteristics Control sttions nd enclosures Control sttion enclosures: insulted, metl nd Insulted enclosures XAP-A Mteril nd colour Glss-reinforced polyester, coloured grey throughout Approvls Specil version: CSA ENCLOSURE 4 nd 5 Protective tretment Amient ir temperture Stndrd version: TC nd TH Opertion: - 25 + 70 C. Storge: - 40 + 70 C Degree of protection IP 5 conforming to IEC 529 nd IP 57 conforming to NF C 20-010 Electric shock protection Clss II conforming to IEC 53 nd NF C 20-030 Flme resistnce Chemicl resistnce CSTB: M3, NF C 20-455: 850 C, IEC 92: 90 C, UL 94: VO Highly resistnt to cids, ses, se wter, minerl slts, ll solvents, petrol, diesel, oils nd greses Cle entry Diecst metl enclosures XAP-M Undrilled, drill to suit Mteril nd colour Approvls Protective tretment Amient ir temperture Zinc lloy (XAP-M1, M2, M3, M4), luminium lloy (XAP-M5). Blue pint finish Specil version: CSA ENCLOSURE 4 nd 5, UL ENCLOSURE 1, 3, 4 nd 12K Stndrd version: TC. Specil version: TH Opertion: - 25 + 70 C. Storge: - 40 + 70 C Degree of protection IP 5 conforming to IEC 529 nd IP 57 conforming to NF C 20-010 Electric shock protection Clss I conforming to IEC 53 nd NF C 20-030 Chemicl resistnce Specil tretments on request Cle entry Tpped entries for ddition of cle glnds (see dimensions, pge /14) Metl enclosures XB2-S Mteril nd colour Aluminium lloy or sheet steel. Blue pint finish Protective tretment Amient ir temperture Stndrd version: TC. Specil version: TH Opertion: - 25 + 70 C. Storge: - 40 + 70 C Degree of protection IP 54 conforming to IEC 529 nd IP 547 conforming to NF C 20-010 Electric shock protection Clss I conforming to IEC 53 nd NF C 20-030 Chemicl resistnce Specil tretments on request Cle entry XB2-S in luminium lloy: tpped entries for ddition of cle glnds (see dimensions, pge /14) Flush mounting enclosures XAP-E XB2-S in sheet steel: undrilled, drill to suit Mteril nd colour Protective tretment Amient ir temperture Anodised luminium front plte. Insulted protective rer cover Stndrd version: TC nd TH Opertion: - 25 + 70 C. Storge: - 40 + 70 C Degree of protection IP 5 conforming to IEC 529 nd IP 57 conforming to NF C 20-010 Electric shock protection Clss I conforming to IEC 53 nd NF C 20-030 Chemicl resistnce Cle entry References: pges /11 to /13 High degree of resistnce to orgnic cids, diluted minerl cids, slts, lcohol, cetone, chloride nd fluoride solvents, oils nd petrol Through rer cover: knock-out cle entries pges /14 nd /15 /10 Schneider Electric
References Control sttions nd enclosures Control sttion enclosures: insulted, metl nd With cut-outs for Ø 22 mm control nd signlling units Insulted enclosures, glss-reinforced polyester (usle depth 83 mm) Description Front fce Numer Numer of rows Reference Weight dimensions of verticl horizontl mm cut-outs kg Without 85 x 14 1 1 1 XAP-A1110 0.470 hinges XAP-A1104 2 1 2 XAP-A1120 0.450 4 2 2 XAP-A1104 0.40 85 x 22 8 2 4 XAP-A2108 0.580 151 x 241 1 4 4 XAP-A311 0.820 XAP-A2108 With 151 x 241 1 4 4 XAP-A411 0.850 hinges Erthing For XAP-A1110 XAP-Z110 0.080 pltes Sheet steel with erth screw For XAP-A1120 XAP-Z120 0.070 For XAP-A1104 XAP-Z104 0.070 XAP-A311 For XAP-A2108 XAP-Z208 0.110 For XAP-A311 nd A411 XAP-Z31 0.10 Elowed metl enclosures for mounting on verticl support Description Numer of Reference Weight cut-outs kg DWG-p Elowed enclosure 1 DWG-1 0.45 metl Lid: light grey (RAL 7035) 2 DWG-2 0.545 Bse: drk grey (RAL 701) 3 DWG-3 0.725 Chrcteristics: pge /10 Schneider Electric Other versions pge /14 4 DWG-4 0.725 5 DWG-5 0.790 DWG- 0.990 7 DWG-7 0.990 Insulted nd metl control sttion enclosures with cut-outs for Ø 30 mm control nd signlling units. Protective gurds nd fixing lugs for diecst metl enclosures. Insulted nd metl control sttion enclosures pre-fitted with Ø 22 units. Adjustle floor mounting pedestl (790 to 1143 mm) for sheet steel enclosures. Plese cll our Customer informtion centre on 0870 08 8 08. /11
References (continued) Control sttions nd enclosures Control sttion enclosures: insulted, metl nd With cut-outs for Ø 22 mm control nd signlling units Diecst metl enclosures (lue lid nd se) Description Front fce Numer Numer of rows Reference Weight dimensions of verticl horizontl mm cut-outs kg XAP-M1202H29 XAP-M2203H29 Zinc lloy 80 x 80 1 1 1 XAP-M1201H29 0.455 Usle depth 2 2 1 XAP-M1202H29 0.450 49 mm 80 x 130 2 1 2 XAP-M2202H29 0.10 3 1 3 XAP-M2203H29 0.05 4 2 2 XAP-M2204H29 0.00 80 x 175 3 1 3 XAP-M3203H29 0.870 4 1 4 XAP-M3204H29 0.880 2 3 XAP-M320H29 0.870 XAP-M2504H29 XAP-M4508H29 Zinc lloy 80 x 80 1 1 1 XAP-M1H29 0.05 Usle depth 2 2 1 XAP-M2H29 0.00 74.5 mm 80 x 130 2 1 2 XAP-M2502H29 0.810 3 1 3 XAP-M2503H29 0.815 4 2 2 XAP-M2504H29 0.810 80 x 175 3 1 3 XAP-M3503H29 1.145 4 1 4 XAP-M3504H29 1.140 2 3 XAP-M350H29 1.130 80 x 220 1 XAP-M450H29 1.380 8 2 4 XAP-M4508H29 1.370 XB2-SL42009 Aluminium lloy 85 x 310 8 1 8 XAP-M5508H29 0.810 Usle depth 74.5 mm 12 2 XAP-M5512H29 0.790 Aluminium lloy x 3 2 XB2-SL32009 0.970 Usle depth 78 mm 8 4 2 XB2-SL42009 0.90 Diecst metl enclosures (yellow lid, lue se) Zinc lloy 80 x 80 1 1 1 XAP-J1201H29 0.455 Usle depth 49 mm XB2-SL4007 Zinc lloy 80 x 80 1 1 1 XAP-J1H29 0.05 Usle depth 74.5 mm Sheet steel enclosures Usle depth 200 x 200 8 4 2 XB2-SL42007 3.100 115 mm 200 x 20 1 4 4 XB2-SL44007 3.900 20 x 20 24 4 XB2-SL4007 4.700 20 x 320 30 5 XB2-SL5007 5.500 320 x 320 40 8 5 XB2-SL85007.200 Chrcteristics: pge /10 pge /14 Other versions Insulted nd metl control sttion enclosures with cut-outs for Ø 30 mm control nd signlling units. Protective gurds nd fixing lugs for diecst metl enclosures. Insulted nd metl control sttion enclosures pre-fitted with Ø 30 XB2-M units. Adjustle floor mounting pedestl (790 to 1143 mm) for sheet steel enclosures. Plese cll our Customer informtion centre on 0870 08 8 08. /12 Schneider Electric
References Control sttions nd enclosures Control sttion enclosures: insulted, metl nd Undrilled or with cut-outs for Ø 22 mm control nd signlling units Insulted enclosures, undrilled Description Front fce Reference Weight dimensions mm kg Usle depth Without hinges 85 x 14 XAP-A1100 0.470 83 mm 85 x 22 XAP-A2100 0.00 151 x 241 XAP-A3100 0.80 With hinges 151 x 241 XAP-A4100 0.890 XAP-A1100 XAP-A2100 Erthing pltes For XAP-A1100 XAP-Z100 0.080 with erth screw For XAP-A2100 XAP-Z200 0.130 For XAP-A3100 nd A4100 XAP-Z300 0.200 Diecst metl enclosures, undrilled Blue lid nd se Zinc lloy 80 x 80 XAP-M11H29 0.40 Usle depth 49 mm 80 x 130 XAP-M21H29 0.20 80 x 175 XAP-M31H29 0.900 Zinc lloy 80 x 80 XAP-M14H29 0.10 Usle depth 74.5 mm 80 x 130 XAP-M24H29 0.830 80 x 175 XAP-M34H29 1.10 80 x 220 XAP-M44H29 1.410 XAP-A3100 Aluminium lloy 85 x 310 XAP-M54H29 0.850 Usle depth 74.5 mm Aluminium lloy x XB2-SA220095 0.970 Usle depth 78 mm Yellow lid, Zinc lloy 80 x 80 XAP-J11H29 0.40 lue se Usle depth 49 mm XAP-M11H29 XAP-M31H29 Zinc lloy 80 x 80 XAP-J14H29 0.10 Usle depth 74.5 mm 80 x 175 XAP-J34H29 1.10 Flush mounting enclosures for Ø 22 mm control nd signlling units Description Mteril Numer Front fce Reference Weight of dimensions cut-outs mm kg XAP-E301 XAP-E302 Front pltes Anodised 1 72 x 72 XAP-E301 0.050 with fixing screws luminium 2 72 x 105 XAP-E302 0.075 3 72 x 138 XAP-E303 0.095 4 72 x 171 XAP-E304 0.115 5 72 x 204 XAP-E305 0.135 XAP-E303 XAP-E305 Protective Insulted For front plte XAP-E301 XAP-E901 0.040 rer covers For front plte XAP-E302 XAP-E902 0.050 For front plte XAP-E303 XAP-E903 0.00 For front plte XAP-E304 XAP-E904 0.070 For front plte XAP-E305 XAP-E905 0.080 Accessories ZB2-SZ2 Blnking plugs Insulted Blck ZB2-SZ3 0.005 with sel nd fixing nut For cut-outs Ø 22.3 +0.4 mm Grey ZB2-SZ4 0.005-0 Metl Blue ZB2-SZ2 0.020 ZB2-SZ3 ZB2-SZ4 Chrcteristics: pge /10 Schneider Electric Sel (degree of protection IP 5) For mounting Ø 22 ZB2-BZ004 0.001 (sold in lots of 7) control nd signlling units in DWGp enclosures Other versions Protective gurds nd fixing lugs for diecst metl enclosures. Flush mounting enclosures, undrilled or with Ø 30 mm cut-outs. Flush mounting control sttion enclosures pre-fitted with Ø 22 mm units. Plese cll our Customer informtion centre on 0870 08 8 08. pge /15 /13
Dimensions Control sttions nd enclosures Control sttion enclosures: insulted, metl nd With cut-outs for Ø 22 mm control nd signlling units Insulted enclosures with cut-outs XAP-A P=83 = 1 1 = Fixing (2) XAP- 1 2 G H A1110 85 14 70 105 A1120 85 14 40 70 105 A1104 85 14 40 30 70 105 A2108 85 22 40 30 70 180 A311, A411 151 241 40 30 135 200 Drill cle entries to suit. 11 mm for XAP-A4ppp enclosures with hinges. (2) 2 x Ø 5. mm holes, depth 12 mm. P = Usle depth 87 = 2 2 = Diecst metl enclosures with cut-outs XAP-J, XAP-M P=74 78 (4) = 1 1 = = 30 30 30 = = 0 = = 0 = Fixing XAP- 1 2 c G H P (3) J1201H29 80 80 51.5 50 5 49 J1H29 80 80 77 50 5 74.5 P M1201H29 80 80 51.5 50 5 49 M1202H29 80 80 51.5 50 5 49 M1H29 80 80 77 50 5 74.5 M2H29 80 80 30 77 50 5 74.5 M2202H29 80 130 40 51.5 50 115 49 c = 2 = (2) M2203H29 80 130 30 51.5 50 115 49 M2204H29 80 130 30 51.5 50 115 49 M2502H29 80 130 40 77 50 115 74.5 M2503H29 80 130 30 77 50 115 74.5 XB2-SL32009 Fixing M2504H29 80 130 40 30 77 50 115 74.5 (4) M3203H29 80 175 40 51.5 50 10 49 M3204H29 80 175 30 51.5 50 10 49 M320H29 80 175 40 30 51.5 50 10 49 P=74 M3503H29 80 175 40 77 50 10 74.5 M3504H29 80 175 30 77 50 10 74.5 M350H29 80 175 40 30 77 50 10 74.5 M450H29 80 220 30 77 50 205 74.5 78 = 30 30 = M4508H29 80 220 40 30 77 50 205 74.5 M5508H29 85 310 30 77 55 295 74.5 M5512H29 85 310 40 30 77 55 295 74.5 1 hole, without lnking plug, for 20 mm ISO cle glnd, except: XB2-SL42009 Fixing - XAP-M3pppH29 nd XAP-M4pppH29: 25 mm ISO cle glnd, - XAP-M5pppH29: 32 mm ISO cle glnd. (2) 1 hole, with lnking plug (protrusion mm), for 20 mm ISO cle glnd, except: - XAP-M3pppH29: 25 mm ISO cle glnd, - XAP-M4pppH29 nd XAP-M5pppH29: undrilled. (3) 2 x Ø 5. mm holes, depth 20 mm. (4) 2 holes, with lnking plugs (protrusion 7.5 mm), for cle glnds with 12 mm mximum clmping cpcity. P = Usle depth Sheet steel enclosures XB2-SL Elowed enclosures DWG-p 70 19 P=115 = 1 1 1 = 79 0 100 120 = 2 2 2 = XB2-1 2 SL42007 200 200 40 30 SL44007 200 20 40 30 SL4007 20 20 40 30 SL5007 20 320 40 30 SL85007 320 320 40 30 Chrcteristics: pge /10 Enclosures supplied without fixing points or cle entries. In oth cses, drill to suit. The enclosures re deep enough to ccommodte ll Ø 22 control nd ccommodte ll Ø 22 control nd signlling units. P = Usle depth References: pges /11 nd /12 c 30 c DWG-1 90 74 50 DWG-2 135 119 95 DWG-3 180 14 140 DWG-4 180 14 140 DWG-5 225 209 185 DWG- 290 274 230 DWG-7 290 274 230 /14 Schneider Electric
Dimensions Control sttions nd enclosures Control sttion enclosures: insulted, metl nd Undrilled nd with cut-outs for Ø 22 mm control nd signlling units Undrilled insulted enclosures XAP-A1100, XAP-A2100 Fixing XAP-A3100, XAP-A4100 XAP- G H A1100 85 14 70 105 A2100 85 22 70 180 P=83 (2) A3100 151 241 135 200 A4100 151 241 135 200 Drill cle entries to suit. 11 mm for XAP-A4ppp enclosures with hinges. (2) 2 x Ø 5. mm holes, depth 12 mm. 87 P = Usle depth Undrilled diecst metl enclosures XAP-JppH29, XAP-MppH29 P c = = XB2-SA220095 (4) P=74 (2) Fixing (3) XAP- c G H P J11H29 80 80 51.5 50 5 49 J14H29 80 80 77 50 5 74.5 J34H29 80 175 77 50 10 74.5 M11H29 80 80 51.5 50 5 49 M14H29 80 80 77 50 5 74.5 M21H29 80 130 51.5 50 115 49 M24H29 80 130 77 50 115 74.5 M31H29 80 175 51.5 50 10 49 M34H29 80 175 77 50 10 74.5 M44H29 80 220 77 50 205 74.5 M54H29 85 310 77 55 295 74.5 1 hole, without lnking plug, for 20 mm ISO cle glnd, except: - XAP-J34H29, M3H291, M34H29 nd M44H29: 25 mm ISO cle glnd, - XAP-M54H29: 32 mm ISO cle glnd. (2) 1 hole, with lnking plug (protrusion mm), for 20 mm ISO cle glnd, except: - XAP-J34H29, M31H29, M34H29: 25 mm ISO cle glnd, - XAP-M44H29, M54H29: undrilled. (3) 2 x Ø 5. mm holes, depth 20 mm. (4) 2 holes, with lnking plugs (protrusion 7.5 mm), for cle glnds with 12 mm mximum clmping cpcity. 78 = = P = Usle depth Flush mounting enclosures Front pltes with cut-outs for Ø 22 mm control nd signlling units For Ø 22 mm control nd signlling units XAP-E30p Pnel cut-out Front plte 14,5 0 4xM4 XAP- 1 H E301 72 44 5 E302 105 77 89 E303 138 110 122 E304 171 143 155 E305 204 17 188 5 = 5 = Mounting of front plte nd protective rer cover P = = 72 = 30 30 30 = 5 1 H Protective rer cover for front plte XAP-E30p XAP- P E901 52 82.5 E902 85 82.5 E903 118 82.5 E904 151 82.5 E905 184 82.5 P = Usle depth Chrcteristics: pge /10 80 References: pge /13 = = 59 Schneider Electric /15