Torque Rods For more information visit www.theuniversalgroup.com or call 1.800.225.1845 Universal Group The Universal Group, LLC 1025 Thomas Busch Memorial Highway Pennsauken, New Jersey 08110 1.800.225.1845 856.488.1800 Fax 1.800.360.9636on 2018 The Universal Group, LLC All Rights Reserved
TM TRAXX ROD Torque Rods TM The TRAXX ROD Performance - Up to *five times the performance life of conventional double shot bushings and similar performance of ball and socket torque rods, with better energy absorption, delivering superior bushing retention and longer component life for heavy-and severe-duty applications. Heavy-duty - Recommended for 40,000 lb. to 52,000 lb. capacity suspensions in most vocational applications. Severe-duty - Recommended for 60,000 lb. to 70,000 lb. capacity suspensions. Also available for 40,000 lb. to 52,000 lb. capacity suspensions for even longer service intervals. Fabricated rod body works in conjunction with our proprietary bushings to meet a large footprint for heavy loads and energy absorption from high articulation and side load events. Offers easy and inexpensive flexibility to create a variety of torque rod lengths. Length variety significantly reduces the need for shims which can compromise the connection integrity if not secured properly or used with correct shims. One-piece design supports uptime by removing and replacing with the original one-piece length for an accurate fit the first time. Curled outer metal casing places rubber in pre-compression mode to harness the energy and perform at the highest peak, providing best-in-class durability and performance. Proprietary rubber material helps reduce cost of ownership by absorbing horizontal, vertical and torsional forces for long component life. High strength bond of rubber to inner metal eliminates friction between the inner metal and rubber, minimizing bushing wear and increasing component life cycle. Hardened steel bar pins and taper pins deliver increased resistance against wear and abrasion to extend the service intervals of the component.
TM TRAXX ROD Torque Rods Smart Numbering System The TRAXX ROD family uses the Smart Numbering System, in which each digit signifies the body style, bushing combination, bushing hole diameter, bushing clocking angle and the torque rod length.
Hendrickson TRAXX ROD Torque Rods Description Length H-8240-0000-560 Hendrickson Traxx Rod for PRIMAAX 22.05 EX / Kenworth / Peterbilt Refuse Hole Size Type Automann TMR512 Parts Flagg Atro Other TR50-42560 067428-560 / 072000-560C H-8240-0000-565 Hendrickson Traxx Rod for PRIMAAX 22.25 TMR617 TR50-42565 067428-565 EX / Kenworth / Peterbilt Refuse H-8240-0000-575 Hendrickson Traxx Rod for PRIMAAX 22.63 TMR684 TR50-42575 072000-575S EX / Autocar / Other H-8240-0000-580 Hendrickson Traxx Rod for Peterbilt 22.83 TMR551 345-241 PB15 TR75-41059 STR-1003 AirTrac, Air Leaf H-8240-0000-595 Hendrickson Traxx Rod for PRIMAAX 23.42 072000-595 EX / Hino H-8240-0000-620 Hendrickson Traxx Rod for PRIMAAX 24.4 TMR481 TR50-42620 062350-620 EX/FIREMAAX EX / Fire and Rescue H-8240-0000-640 Hendrickson Traxx Rod PRIMAAX EX 25.25 TMR634 TR50-42640 067428-640 / Navistar H-8240-0000-645 Hendrickson Traxx Rod for PRIMAAX 25.39 TMR703 TR00-41270 067428-645 / EX / Navistar / Caterpillar STR-1002 H-8240-0000-650 Hendrickson Traxx Rod for Peterbilt 25.56 TMR532B 345-215 PB46 STR-1005 Low Air Leaf / Flex Air
The Universal Group, LLC Hendrickson TRAXX ROD Torque Rods Description Length Hole Size Type Automann Parts Flagg Atro Other H-8244-0099-585 23.12 TMR674 TR50-41587 072350-585 \ Walking Beam / Peterbilt / Other 072350-585S \ 062350-590 H-8244-0099-610 24.02 TMR69 345-887 TR59-41376 / 062350-615 Walking Beam / Kenworth TR50-41610 H-8244-0099-615 24.25 TMR673 TR50-41615 077130-615 Walking Beam / Kenworth H-8244-0099-620 24.4 TMR480 TR50-41620 072350-620 Walking Beam / Fire and Rescue H-8244-0099-625 24.6 TR50-41625 062350-630 Walking Beam / Freightliner H-8244-0099-635 Hendrickson Traxx Rod for HAULMAAX/ 25 TMR640 TR59-41150 / Walking Beam / Mack / Waste TR50-41635 Management Spec H-8244-0099-645 25.39 TMR501 TR50-41645 Walking Beam / Navistar H-8244-0099-660 25.98 072350-660 Walking Beam / Autocar
Fixed Length Torque Rods - Straddle / Straddle Part Shaft Hole Number Description Type OEM Length Diameter Size Automann Parts Flagg STR-1000 Freightliner 681 326 6716 23 15/16 TMR514 345-212 FL39 STR-1001 Peterbilt High Confinement C65-6002 25 3/4 1 1/4 TMR553 345-884 Kenworth Non-Rebushable STR-1002 International High Confinement 501565C2 25 3/8 TMR533 345-904 IH22 Ford Non-Rebushable STR-1003 Peterbilt 03-02439 22 7/8 TMR518 345-210 PB15 STR-1004 Peterbilt 03-04327 17 11/32 1 1/4 TMR520 345-211 PB33 STR-1005 Peterbilt Sealed 03-05108 25 9/16 TMR532 345-215 PB46 STR-1006 Mack 20.0 Sealed 17QF460P200 20 1 1/8 TMR568 STR-1007 Mack 21.5 Sealed 17QF460P215 21 1/2 1 1/8 TMR571 STR-1008 Mack 22.0 Sealed 17QF460P220 22 1 1/8 TMR555 STR-1009 Mack 22.5 Sealed 17QF460P225 22 1/2 1 1/8 TMR573 STR-1010 Mack 24.5 Sealed 17QF460P245 24 1/2 1 1/8 TMR576 STR-1016 Mack 21 17QF473M2 21 1 1/8 TMR541 345-892 STR-1017 Mack 21 Sealed 17QF460P210 21 1 1/8 TMR570
The Universal Group, LLC Fixed Length Torque Rods - Straddle / Straddle Part Shaft Hole Number Description Type OEM Length Diameter Size Automann Parts STR-1019 Freightliner 24.21 Sealed 16-15632-000 24.21 1 1/4 MR536 345-916 Flagg STR-1020 International 18.125 588117C91 18 1/8 1 1/4 TMR510 345-188 IH11 STR-1021 International 22 588118C91 22 1 1/4 TMR512T 345-187 IH12 588118C92 STR-1022 Freightliner 16.625 16-13053-000 16 1 9/16 TMR516 345-208 FL48 16-13498-000 STR-1023 Freightliner 18.187 16-10420-001 18 1/5 1 9/16 TMR513 345-185 FL23 E-3546 STR-1024 Freightliner 23 681-326-63-16 23 1 9/16 TMR515 345-213 FL42 E-8808 Fixed Length Torque Rods - Straddle / Tapered Part Shaft Hole Number Description Type OEM Length Diameter Size Automann Parts Flagg STR-1011 Mack 18.25 Sealed 17QF463P183 18 1/4 1 1/4 TMR591 345-226 STR-1012 Mack 18.25 Sealed 17QF464P183 18 1/4 1 1/8 TMR562 STR-1013 Mack 20.25 Sealed 17QF463P203 20 1/4 1 1/4 TMR593 345-227 STR-1014 Mack 19.75 Sealed 17QF463P198 19 3/4 1 1/4 TMR592 STR-1015 Mack 24.5 Sealed 17QF463P245 24 1/2 1 1/4 TMR596 345-229 STR-1018 Mack 25.5 Sealed 17QF464P255 25 1/2 1 1/8 TMR566
ZF Uni-Rod Full Ball Three Piece Kits Reference Suspension Rating (lbs.) Description Automann Flagg STRU-3001 HU-2040 20K-38K Standard Hollow Ball, Both Ends (7/8 Dia. Hole), Neway Air Ride Suspension TMR058 345-814 TR17 STRU-3002 BU-3436 34K-36K STRU-3003 HU-3436 34K-36K STRU-3004 HU-3436L 34K-36K STRU-3005 SBU-3436 34K-36K Standard Ball Stud (Hendrickson) Both Ends (1 1/8-12 Threads) Standard Hollow Ball, Both Ends (7/8 Dia. Hole), 20-30 Fruehauf Air Ride Suspension Standard Hollow Ball, Both Ends (7/8 Dia. Hole), 30-40 Fruehauf Air Ride Suspension Standard Ball Stud (Hendrickson) One End (1 1/8-12Thread). Standard Straddle Ball, Other End TMR008 345-817 TR3 TMR060 345-811 TR18 TMR061 345-812 TMR010 345-807 TR4 STRU-3006 SU-3436 34K-55K Standard Straddle Ball, TMR006 345-803 TR2 Both Ends. Also Used as A Track Bar And For On-Highway Use Up To 55,000 Suspension. STRU-3007 IHU-3444* 34K-65K STRU-3008 MU-3800 38K-55K Offset Straddle Ball, One End. Standard hollow Ball, Other End (1 1/8 Dia. Hole). Navistar Suspension Only. Ball Stud, Both Ends (1 1/4-12 Thread). Mack Suspension Only. TMR054 345-809 TR15 TMR012 345-818 TR5 STRU-3009 SMU-3800 38K-55K Ball Stud, One End (1 1/4-12 Thread). Standard Straddle Ball, Other End. Mack Suspension Only. TMR014 345-804 TR6 * Indicates Heavy - Duty Kit
The Universal Group, LLC ZF Uni-Rod Full Ball Three Piece Kits Reference Suspension Rating (lbs.) Description Automann Parts Flagg STRU-3010 BU-3844* 38K-65K Standard Stud (Hendrickson) Both Ends (1 1/4-12 Threads). TMR044 345-819 TR10 STRU-3011 HU-3844* 38K-65K Standard Hollow Ball, Both Ends (1 1/8 Dia. Hole). TMR046 345-820 TR11 STRU-3012 SBU-3844* 38K-65K STRU-3013 SBU-3844-75* 38K-65K STRU-3014 SHU-3844* 38K-65K Standard Ball Stud (Hendrickson) One End (1 1/4-12 Thread). Standard Straddle Ball, Other End. Standard Ball Stud (Hendrickson) One End (1 1/4-12 Thread). Straddle Ball, Other End (For 3/4 Dia. Mounting Bolts). Standard Straddle Ball, One End. Standard Hollow Ball, Other End (1 1/8 Dia. Hole). TMR050 345-801 TR13 TMR062 345-821 TR19 TMR048 345-810 TR12 STRU-3015 SU-3844* 38K-65K Standard Straddle Ball, Both Ends. Also Used As A Track Bar (2 3/8 Ball). TMR020 345-802 TR9 STRU-3016 LMU-4044* 44K-80K STRU-3017 MU-4044* 38K-65K Ball Stud, One End (1 1/4-12 Thread). Straddle Ball, Other End (For 7/8 Mounting Bolts). Mack Suspension Only. Ball Stud, Both Ends (1 1/4-12 Thread). Mack Suspension Only. TMR056 345-805 TR16 TMR016 345-808 TR7 STRU-3018 SMU-4044* 38K-65K Ball Stud, One End (1 1/4-12 Thread). Standard Straddle Ball, Other End. Mack Suspension Only. TMR018 345-806 TR8 Note: Where Mack Suspension Only is specified, the mounting ball stud taper differs from normal industry standards.
Hendrickson Ultra Rod Two Piece Torque Rods - Tube Ends Mounting Replacement Hole End Type Center B Bushing Diameter Automann Parts H-66610-000 Straddle 4 3/8 H-47691-000 TMRN610 345-610 H-66766-000 Straddle 4 3/8 H-67746-000 7/8 TMRN766 345-612 B H-66767-000 Straddle 5 3/8 H-69210-000 3/4 TMRN767 345-613 H-66640-000 B Straddle 5 11/16 H-66734-000 3/4 TMRN640 345-640 H-66650-000 Straddle H-65477-000 1 1/8 TMRN650 345-650 B D x E Replacement End Type Thread Bushing Automann Parts H-66620-000 Tapered 2 x 1 1/8 H-64809-000 TMRN620 345-620 H-66769-000 D Tapered 1 7/8 x 1 1/4 H-66735-000 TMRN769 345-769 H-66630-000 E Tapered 3 x 1 1/4 H-64697-000 TMRN630 345-630 Hendrickson Ultra Rod Two Piece Torque Rods - Spacer Ends Mounting Length Replacement Hole End Type Center B C to C Bushing Diameter Automann Parts B H-66660-000 Straddle 4 3/8 35 H-47691-000 TMRN660 345-660 H-66661-000 Straddle 4 3/8 27 H-47691-000 TMRN661 345-661 H-66768-000 Straddle 5 11/16 27 H-66734-000 3/4 TMRN768 - H-67047-000 Straddle 4 3/8 27 H-69210-000 3/4 TMRN047 345-614 H-67048-000 Straddle 4 3/8 27 H-67746-000 7/8 TMRN048 345-668
The Universal Group, LLC Hendrickson Ultra Rod Two Piece Torque Rods - Spacer Ends D to E Length Replacement End Type Thread C to C Bushing Automann Parts H-66690-000 Mack Tapered 1 7/8 x 1 1/4 35 H-66735-000 TMRN690 345-690 D H-66691-000 Mack Tapered 1 7/8 x 1 1/4 27 H-66735-000 TMRN691 345-691 E H-66670-000 Tapered 2 x 1 1/8 35 H-64809-000 TMRN670 345-670 H-66671-000 D Tapered 2 x 1 1/8 27 H-64809-000 TMRN671 345-671 E H-66680-000 Tapered 3 x 1 1/4 35 H-64697-000 TMRN680 345-680 H-66681-000 D Tapered 3 x 1 1/4 27 H-64697-000 TMRN681 345-681 E H-66700-000 Tapered 35 H-65477-000 TMRN700 345-700 H-66701-000 B Tapered 27 H-65477-000 TMRN701 345-701 Hendrickson Ultra Rod Plus Two Piece Torque Rods - Tube Ends Mounting Replacement Hole End Type Center B Bonded Bushing Diameter Automann Parts H-64473-000 Blank TMRU8 345-473 H-46610-001 Straddle 4 3/8 H-64400-002 TMRU610 345-610HD B Hendrickson Ultra Rod Plus Two Piece Torque Rods - Spacer Ends Mounting Replacement Hole End Type Center B Bonded Bushing Diameter Automann Parts H-64474-000 Blank TMRU30-1-2 345-474 H-46661-001 Straddle 4 3/8 H-64400-002 TMRU661 345-661HD B D x E Replacement Hole End Type Thread Bonded Bushing Diameter Automann Parts H-46681-001 Tapered 3 x 1 1/4 H-46681-001 TMRU681 345-681HD D E
SOT-53663713 Universal Group www.theuniversalgroup.com No. TR 003 04-18 THE UNIVERSAL GROUP, LLC, THE UNIVERSAL GROUP, UNIVERSAL GROUP, U Design, Globe Design, and U and Globe Design are trademarks of The Universal Group, LLC Pennsauken, New Jersey. 2018 The Universal Group, LLC All Rights Reserved