M6 24kV Medium Voltage Switchgear MetalEnclosed (LSC2A)
GENERAL FEATURES GENERAL DESCRIPTION The structure of the cubicles, of considerable strength, has selfsupporting structure and is made of steel sheet 2mm thick bent and suitably stiffened. Each module is normally divided into two compartments: a higher one, where there are the busbars. a lower one containing the various devices. The switching body and isolation (LBS) separates the two compartments and acts, in the open position, as segregation. The accessibility to the lower compartment is made possible by the opening of a hinged door, the opening of which, mechanically interlocked with the operating means of the module, allows to perform any operation with the rest of the cubicle in service from which it is segregated by the LBS with degree of protection IP 2X. MAIN FEATURES M6 24kV series Metal enclosed units, have been designed and tested to be used for all energy distribution systems till 24kV Modular Metal Enclosed units appears as the optimal solution with their easiness of taking operation by means of their modular structure M6 24kV series Metal enclosed units are manufactured according to IEC Standards Long term technical solutions for various applications High level personnel safety STANDARDS Compliance with standards IEC 62271 1 Compliance with standards IEC 62271 200 Classification of service continuity: LSC 2A Classification of the partitions: PI or PM APPLICATIONS Manufacturing industry Secondary distribution networks MV / LV distribution transformer substations Small size power plants Wind power plants Airports, hospitals SAFETY There is a surveillance window on the front cover of every cubicle to check inside the same cubicle without opening the door / cover The door / cover of the accessible compartments is mechanically interlocked with the earthing switches Voltage indication system is provided in each cubicle 2
TECHNICAL DATA Rated voltage kv 12 17,5 24 Rated lighting impulse withstand voltage Across phases and phase to earth kv peak 75 95 125 Across the isolating distance 85 110 145 Rated power frequency withstand voltage Across phases and phase to earth kv eff 28 38 Across the isolating distance 32 45 60 Rated frequency Hz / 60 / 60 / 60 Rated current Busbar Feeder Rated short time withstand current Main circuit ka eff / 20 / 25 / 20 / 25 / 20 / 25 Earthing circuit 15 Rated peak withstand current ka peak 40 / / 62,5 40 / / 62,5 40 / / 62,5 Rated duration of short circuit s 1 / 3 1 / 3 1 / 3 Arc fault current, 1 s ka Internal arc class A(FLR) / A(FL) A(FLR) / A(FL) A(FLR) / A(FL) Partitions class PI PM PI PM PI PM Loss of the service continuity LSC2A LSC2A LSC2A Degree of protection, enclosure Degree of protection, partitions Ambient temparature Maximum value C +40 +40 +40 Maximum value of 24 h mean +35 +35 +35 Minimum value 5 5 5 *For different or higher values please contact us 3 www.3benergy.com
TYPICAL UNITS CI Cable Incoming Cubicle BI Busbar Incoming Cubicle Busbars Connection Earthing Switch Key Lock on Earthing Switch Earthing Switch Key Lock on Earthing Switch BR Bus Riser Cubicle width 7mm width 7mm 4
TYPICAL UNITS LF Line Feeder Cubicle LM Line Feeder with Metering Cubicle LoadBreak Switch complete with Earthing Switch Key Lock on Earthing Switch AntiCondensation Heater EarthFault Detector with Toroidal CTs LoadBreak Switch complete with Earthing Switch AntiCondensation Heater EarthFault Detector with Toroidal CTs M Metering Cubicle TR Transformer Feeder Cubicle LoadBreak Switch complete with Earthing Switch and Fuseholders Manual Tripping Operating Mechanism for LBS Set of n.3 Fuses 6A (phase/earth) AntiCondensation Heater (phase/phase) width 7mm LoadBreak Switch complete with Earthing Switch and Fuseholders Manual Tripping Operating Mechanism for LBS Set of n.3 Fuses 40A AntiCondensation Heater EarthFault Detector with Toroidal CTs 5 www.3benergy.com
TYPICAL UNITS CB1 Circuit Breaker Cubicle CB2 Circuit Breaker Cubicle LoadBreak Switch complete with Earthing Switch MV Automatic SF6/Vacuum Circuit Breaker Key Lock on CB Multifunction Protection Relay AntiCondensation Heater Motor Operating Mechanism on CB LoadBreak Switch complete with Earthing Switch MV Automatic SF6/Vacuum Circuit Breaker Key Lock on CB Multifunction Protection Relay AntiCondensation Heater Motor Operating Mechanism on CB CB3 Circuit Breaker Cubicle CB4 Circuit Breaker Cubicle and Bus Riser LoadBreak Switch complete with Earthing Switch MV Automatic SF6/Vacuum Circuit Breaker Key Lock on CB Multifunction Protection Relay AntiCondensation Heater Motor Operating Mechanism on CB and Bus Riser N.2 LoadBreak Switches complete with Earthing Switch MV Automatic SF6/Vacuum Circuit Breaker s Key Lock on CB Multifunction Protection Relay AntiCondensation Heater Motor Operating Mechanism on CB 6
INSTALLATION ROOM Version A (mm) B (mm) C(mm) D (mm) Standard (3) 100 (3) 15 (1) Arc proof 600 (2)(3) 100 (3) 15 (1) Internal arc on the front 600 100 100 15 (1) (1) For circuitbreaker units, D = 1200 mm. (2) For lower values, please consult us. (3) When the units are complete with low voltage compartments (control auxiliaries) and the rear sheets are against the wall, distances A and B must be large enough to allow a person to pass through to carry out main busbar assembly. Front Front CIVIL WORKS 275 6 835 835 Cubicles 375 mm Cubicles 7 mm 7 www.3benergy.com
REGISTERED OFFICE Via Villani, 2 26900 LODI (LO) Italy Ph. +39 0371 1856259 Fax. +39 0371 9568847 info@3benergy.com www.3benergy.com HEADQUARTER and PRODUCTION Fraz. Cà de Bolli 26817 S. MARTINO IN STRADA (LO) ITALY