SERIES 9000 Double Offset HP Butterfly Valves Publication S9000-101 Issue 5/18 Rev. D
DESIGN Design Characteristics STEM DESIGN: Available in square shaft for easy mounting of actuators, levers and gear operators. TOP FLANGE: Conforms to ISO 5211 for the mounting of actuators, levers and gear operators. ONE PIECE SHAFT: Maintains disc position. BLOW-OUT PROOF SHAFT: Guarantees shaft containment, and leak mitigation, in the case of extreme failure situations SHAFT PINS: Enables a vibration free connection between the shaft and the disc. BUSHINGS: High performance PTFE bushings provide correct alignment of shaft through the body and reduces torque. SS reinforcement prevents creep and compression in high temperature applications. STEM SEAL: Positive seal in both directions to prevent leakage. DISC EDGE: Smooth finished disc edge provides superior seal, reduces valve torque and provides bubble tight shutoff. BI-DIRECTIONAL BODY & SEAT DESIGN: Suitable for bi-directional use at full rated pressure. 100% TESTED: Every valve is fully in VSI s ISO 9001 facility to ensure performance and reliability. The body is hydrostatically tested to 1.5 times pressure rating The seat is tested to times pressure rating and at 50psi to ANSI Class VI zero leakage. Every valve is serialized and test report is available. Design Standards Design API 609 ANSI B16.34 Face to Face Dimension API 609 Cold Working Pressure 285 PSIG (CL150 WCB) 740 PSIG (CL300 WCB) 275 PSIG (CL150 CF8M) 720 PSIG (CL300 CF8M) Flange Connection ANSI B16.5 Class 150 ANSI B16.5 Class 300 Testing API 598 2
CL150 DIMENSIONS INCHES [MM] ØA B ØC N E H ØJ L ØM P Q W 2 [50] 1.90 [48.2] 10.2 [258.3] 4.75 [120.5] 4 5/8-11UNC 4.9 [125.2] 1.74 [44.2] 0.433 [11] 2.5 (65) 2.49 [63.2] 10.6 [269.2] 5.50 [139.7] 4 5/8-11UNC 5.2 [132.1] 1.84 [46.7] 0.433 [11] 3 [80] 2.84 [72.1] 12.0 [305.7] 6.00 [152.5] 4 5/8-11UNC 6.3 [160.3] 1.96 [49.9] 0.433 [11] 4 [100] 3.67 [93.2] 13.2 [335.2] 7.50 [190.5] 8 5/8-11UNC 7.0 [177.6] 0.709 [18] 2.13 [54] 6 [150] 5.43 [138.0] 16.3 [415] 9.50 [241.5] 8 3/4-10UNC 8.4 [214] 0.787 [20] 2.26 [57.4] EXCELLENCE IN COMMERCIAL AND INDUSTRIAL VALVES AND AUTOMATION 3
MATERIALS OF CONSTRUCTION 4
MATERIALS OF CONSTRUCTION NO. PART MATERIAL CARBON STEEL STAINLESS STEEL QTY 1 BODY ASTM A216-WCB ASTM A351 CF8M 1 2 CAP ASTM A216-WCB ASTM A351 CF8M 1 3 STEM ASTM A564 17-4PH 1 4 DISC ASTM A351 CF8M 1 5 PIN AISI SS304 2 6 UPPER BEARING SS REINFORCED PTFE 1 7 LOWER BEARING SS REINFORCED PTFE 1 8 SEAT TFM 1 9 SEAT RETAINER ASTM A216-WCB ASTM A351 CF8M 1 10 PACKING PTFE 1 SET 11 SEAL PTFE 1 12 WASHER #1 AISI SS304 1 13 WASHER #2 AISI SS316 1 14 GLAND AISI SS316 1 15 GLAND FLANGE ASTM A351 CF8M 1 16 GLAND BOLT AISI SS304 2 17 LOCK WASHER AISI SS304 2 18 LOCK WASHER AISI SS304 4 19 SOCKET HEAD CAP SCREW AISI SS304 12 20 HEX HEAD SCREW AISI SS304 4 21 HEX NUT AISI SS304 2 22 SHAFT WASHER AISI SS316 1 EXCELLENCE IN COMMERCIAL AND INDUSTRIAL VALVES AND AUTOMATION 5
VALVE CHARACTERISTICS OPERATING TORQUE SIZE SEAT TORQUE (IN-LB) 100 psi 150 psi 200 psi 285 psi 2 237 251 269 274 2.5 271 281 324 335 3 277 329 361 383 4 469 550 572 725 5 688 697 770 842 6 820 909 1018 1269 8 1547 1948 2133 2896 10 2735 3103 3464 4176 12 3425 4447 4757 6161 Shown torque values include a 30% safety factor Torque values are for wetted line media. Dry media such as gases should add additional 10% to torque For actuator sizing if modulating service add additional 10% to torque Torque may vary with valve material and line media - testing may be required. FLOW CHARACTERISTICS SIZE Cv at ANGLE OF OPENING (DEGREES) 10 20 30 40 50 60 70 80 90 2 2 5 13 20 32 45 65 78 89 2.5 4 10 21 35 54 74 114 143 150 3 6 14 33 52 82 118 174 207 225 4 9 26 56 91 150 214 303 366 394 5 16 44 101 170 274 374 565 661 763 6 25 63 150 226 380 557 793 1014 1050 8 57 127 296 495 817 1144 1615 2086 2266 10 82 197 480 758 1213 1770 2596 3104 2376 12 111 275 675 1036 1680 2404 3554 4119 4606 Flow characteristic (Cv) is defined as the volume flow in GPM of water at 70F resulting in a 1psi dp pressure drop The recommended range for flow control is between 30-70 open Data is for reference only - installation conditions may affect flow characteristic 6
MATERIAL AND DESIGN CHARACTERISTICS TEMPERATURE RATINGS 800 700 CS-WCB SS-CF8M SEAT PRESSURE / TEMPERATURE RATING 600 Pressure (PSI) 500 400 300 200 CS-WCB SS-CF8M PTFE RTFE TFM ALTA PEEK 100 0-40 -20 0 50 100 150 200 250 300 350 400 450 500 550 600 650 Temperature (F ) CLASS 150 FLANGES CARBON STEEL STAINLESS STEEL CLASS 300 FLANGES Absolute Minimum Operating Temp [-40F Stainless]/[-20F Carbon] CARBON STEEL STAINLESS STEEL MODEL NUMBER BUILDER S90 - / 1 2 3 4 5 1. Size Code 3. Body Mtrl. Code 2" 2 Stainless Steel CF8M S 2.5 2.5 Carbon Steel WCB* C 3 3 4 4 4. Seat Code 6 6 TFM* 1 RPTFE 2 2. Body Code PEEK 3 ASME Class 150* 15 ALTA 4 ASME Class 300 30 PTFE 5 5. Operator/Act. Code Barestem* Handwheel Electric Pneumatic Hydraulic Blank H Apply Apply Apply Please contact VSI for more information on other available options * Denotes standard product options EXCELLENCE IN COMMERCIAL AND INDUSTRIAL VALVES AND AUTOMATION 7
VSI Limited Product Warranty This limited warranty applies in the United States to products manufactured by VSI, LLC. VSI, LLC. warrants the product purchased from it or its authorized reseller to be free from defects in material and workmanship under normal use during the two year warranty period from the date of its purchase. Other products not manufactured by VSI, LLC. which are provided as part of an assembly may carry additional warranties from that manufacturer or supplier. During the warranty period, VSI, LLC. will repair or replace defective parts of the product, or, at VSI, LLC. sole option, issue a credit for the original purchase price of the product. Repaired or replaced product will be warranted hereunder only for the remaining portion of the original warranty period. All exchanged products under this Limited Warranty will become the property of VSI, LLC. A proper Return Material Authorization (RMA) number will have to be obtained for all products to be returned under this Limited Warranty. Any claim under this Limited Warranty must include a description of the problem encountered and any relevant information that may assist VSI, LLC. in the replication or resolution of the problem. This Limited Warranty is transferable during its term to the end user of the product. Any transfer shall not extend or alter the terms of this Limited Warranty. This Limited Warranty extends only to products purchased from VSI, LLC. or its authorized reseller and does not extend to any product that has been damaged or rendered defective as a result of (a) modification, repair, alteration or improper installation by any person other than VSI, LLC. or its authorized representative; (b) unreasonable or improper use or storage, use beyond rated conditions, operation other than per VSI, LLC. or the manufacturer s instructions, or being otherwise subjected to improper maintenance, negligence or accident; or (c) any use of the product after purchaser has knowledge of any defect in the product. The warranties provided above are in lieu of and exclude all other warranties, statutory, express or implied, including without limitation any warranty or merchantability or fitness for a particular purpose. VSI, LLC. expressly disclaims all warranties not stated in this limited warranty. Any implied warranties that may be imposed by law are limited to the terms of this limited warranty. VSI, LLC. warranty liability shall not exceed the original purchase price of the defective product. VSI, LLC. is not liable for any damages caused by the product or other products or the failure of the product or other products to perform, including any lost profits, lost savings, incidental or consequential damages. VSI, LLC. is not responsible for charges resulting from the removal and/or replacement of the product. VSI, LLC. is not liable for any claims made by third parties or by the purchaser for a third party. This limitation applies whether damages are sought, or a claim is made, under the Limited Warranty or as a tort claim, product liability claim, contract claim, or any other claim. This limitation cannot be waived by any person. This limitation of liability will be effective even if VSI, LLC. or its authorized representative has been advised by the purchaser of the possibility of such damages. VSI, LLC. tel: +1 (770) 740 0800 fax: +1 (770) 740 8777 email: sales@valvesolutions.com Copyright 2012 VSI, LLC. www.valvesolutions.com As part of an on-going product development process, VSI reserves the right to amend or change specifications without prior notice. Published data may be subject to change. For the latest version, visit our website at www.valvesolutions.com