LB5S Log Buster Stand.fm Page 1 Friday, September 16, 2011 4:23 PM STAND FOR LOGBUSTER 5 MODEL NO: LB5S PART NO: 3402045 OPERATION & MAINTENANCE INSTRUCTIONS LS0911
LB5S Log Buster Stand.fm Page 2 Friday, September 16, 2011 4:23 PM INTRODUCTION Thank you for purchasing this CLARKE Log Buster Stand. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights. SPECIFICATIONS Model Number: LB5S Part Number: 3402045 Dimensions (Stand only): Net Weight: 855 x 725 x 735 mm 6.1 kg 2
LB5S Log Buster Stand.fm Page 3 Friday, September 16, 2011 4:23 PM PART IDENTIFICATION UNPACKING The following items should be supplied in the carton. If any parts are missing or damaged, please consult your Clarke dealer where you purchased the stand. 1 1 x Wheel support beam LGLB5S01 2 1 x Cross beam LGLB5S02 3 2 x Vertical support column LGLB5S03 4 1 x Vertical support column with bracket (front) LGLB5S04 5 2 x Motor support brackets - left and right hand LGLB5S05 6 1 x Motor support cross-member LGLB5S06 7 1 x Fixings pack LGLB5S07 3
LB5S Log Buster Stand.fm Page 4 Friday, September 16, 2011 4:23 PM ASSEMBLY PREPARING THE LOG BUSTER 1. Remove the 4 nuts that secure the front foot of the log buster and remove the foot. 2. Remove the wheel hub using a flat screwdriver. 3. Remove the circlip and the wheel. The wheels, circlips and hubs will be attached to the log buster frame later. 4. Look at the wheel mount / pump cover assembly on the logbuster. If there is a hole as shown go to step 9. if not you will need to purchase a replacement wheel mount / pump assembly cover from your Clarke dealer part number 3402044 and go to step 5 5. To replace the wheel mount / pump cover assembly. remove the safety handle and the nut next to it (shown on the right) from the log buster. 4
LB5S Log Buster Stand.fm Page 5 Friday, September 16, 2011 4:23 PM 6. Remove any other nut/bolts that are securing the wheel mount / pump cover assembly to the log buster. 7. Remove the wheel mount / pump cover assembly and replace it with the one you purchased. 8. Refit the safety handle and nuts removed in steps 5 & 6. 9. Assemble the motor support brackets as shown. 10. Fix the motor support bracket to the new wheel mount / pump cover assembly. 5
LB5S Log Buster Stand.fm Page 6 Friday, September 16, 2011 4:23 PM FRAME ASSEMBLY AND FIXING THE LOGBUSTER 1. Assemble the frame as shown. 2. Attach the wheels you removed from the log buster to the log buster stand. 3. Fix the vertical support columns to the wheel mount / pump cover assembly as shown. You may need someone to hold the other end of the logbuster whilst you do this. 4. Secure the front vertical support column to the log buster using the four fixings originally used to secure the foot. 5. The logbuster is now ready for use. MOVING THE LOG BUSTER Lift the log buster by the front handle before moving it. Only use on a firm level surface. 6
LB5S Log Buster Stand.fm Page 7 Friday, September 16, 2011 4:23 PM NOTES 7
LB5S Log Buster Stand.fm Page 8 Friday, September 16, 2011 4:23 PM