BENDING EFFECTIVE July 2005 QUALITY FROM THE CUTTING EDGE OF FABRICATION
TABLE OF CONTENTS COMBINATION OF DIES & PUNCHES - - - - - - - - - - - - - - - - - - - - - - - - - - 3 88º & 90º PUNCHES - - - - - - - - - - - - - - - - - - - - - - - - - - 4 88º & 90º NARROW RELIEF PUNCH & NARROW PUNCH - - - - - - - - - - - - - - - - - - - - - - - - - - 5 88º & 90º GOOSENECK PUNCHES - - - - - - - - - - - - - - - - - - - - - - - - - - 6 88º & 90º SASH PUNCHES - - - - - - - - - - - - - - - - - - - - - - - - - - 8 ACUTE ANGLE PUNCHES - - - - - - - - - - - - - - - - - - - - - - - - - - 9 RADIUS PUNCHES / FLATTENING PUNCHES - - - - - - - - - - - - - - - - - - - - - - - - - - 10 PUNCH HOLDER & RADIUS RULERS - - - - - - - - - - - - - - - - - - - - - - - - - - 11 QUICK CHANGE 2 "V" DIES - - - - - - - - - - - - - - - - - - - - - - - - - - 14 QUICK CHANGE ACUTE ANGLE 2 "V" DIE - - - - - - - - - - - - - - - - - - - - - - - - - - 16 88º & 90º 2 "V" DIES - - - - - - - - - - - - - - - - - - - - - - - - - - 17 ACUTE ANGLE 2 "V" DIE - - - - - - - - - - - - - - - - - - - - - - - - - - 19 88º & 90º 2 "V" DIES - - - - - - - - - - - - - - - - - - - - - - - - - - 20 LOW PROFILE 2 "V" DIES - - - - - - - - - - - - - - - - - - - - - - - - - - 22 ACUTE ANGLE 2 "V" DIES - - - - - - - - - - - - - - - - - - - - - - - - - - 22 DIE RAIL & HOLDERS - - - - - - - - - - - - - - - - - - - - - - - - - - 23 88º & 90º SASH 1 "V" DIES - - - - - - - - - - - - - - - - - - - - - - - - - - 24 RAIL TYPE SASH 1 "V" DIES - - - - - - - - - - - - - - - - - - - - - - - - - - 25 ACUTE ANGLE 1 "V" DIES - - - - - - - - - - - - - - - - - - - - - - - - - - 27 SASH 1 "V" DIE RAIL HOLDERS - - - - - - - - - - - - - - - - - - - - - - - - - - 29 LARGE "V" DIE HOLDER - - - - - - - - - - - - - - - - - - - - - - - - - - 29 LARGE "V" DIES - - - - - - - - - - - - - - - - - - - - - - - - - - 30 FLATTENING DIES - - - - - - - - - - - - - - - - - - - - - - - - - - 33 POLYURETHANE DIES & DIE HOLDERS - - - - - - - - - - - - - - - - - - - - - - - - - - 34 STANDARD OFFSET TOOLS - - - - - - - - - - - - - - - - - - - - - - - - - - 35 HEMMING PUNCH & DIES - - - - - - - - - - - - - - - - - - - - - - - - - - 36 ASTRO ROBOTIC TOOLING - - - - - - - - - - - - - - - - - - - - - - - - - - 37 ONE TOUCH HOLDER & ACCESSORIES - - - - - - - - - - - - - - - - - - - - - - - - - - 38 PRESS BRAKE ACCESSORIES - - - - - - - - - - - - - - - - - - - - - - - - - - 39 REPLACEMENT PARTS - - - - - - - - - - - - - - - - - - - - - - - - - - 42 AIR BENDING FORCE CHART - - - - - - - - - - - - - - - - - - - - - - - - - - 43 AMADA QUALITY TOOLING Amada America, Inc. (AAI) has installed thousands of precision press brakes since 1980. The knowledge gained from this experience has confirmed our conviction that the use of superior tooling ensures optimum performance each and every time the press brake is used. This, in turn, guarantees you the edge in productivity you need to stay ahead of the competition. AMADA Tooling is through-hardened and finish ground with all critical tolerances carefully monitored. In addition, the tooling comes in standardized lengths in a wide variety of shapes designed to meet virtually any forming need. And, since a full inventory of tooling is stocked at our LA MIRADA, CA facility, we are able to respond to your tooling needs in a timely and efficient manner. - 1 -
INCREASE YOUR BENDING PRODUCTIVITY WITH ONE TOUCH Amada s One Touch Holder and tooling allows the brake operator to change punches on the press brake quickly and safely without the need for a wrench. The patented One Touch design allows you to decrease your tooling changeover time, thereby increasing your bending productivity. One Touch Tool Holders and accessories are available for all Amada press brake models. See page 38 in this catalog for all One Touch Holder items. Fast and Easy Tool Set-up With the One Touch Punch Holder, installation is a simple two-step process. Simply slide the grooved punch into the One Touch Punch Holder. Turn the lever to secure the punch in the One Touch Punch Holder. Improved Productivity The One Touch Punch Holder will increase productivity in a variety of ways. U.S. Patents: No. 5,513,514 No. 5,685,191 No. 5,642,642 No. 5,511,407 No. 5,619,885 The removable lever and push-in stopper pin provide speed and safety without sacrificing machine capacity. Sectionalized punches can be snapped in and out from the front. Increases the ease of stage bending. Unit features front & rear clamping. Features of Amada Tooling High Precision AMADA tooling is hardened and ground to give you optimal press brake performance with all critical tolerances ground to within 0.0008" (.02 mm). Amada precision performance helps eliminate secondary handling to correct errors while also helping to decrease bending costs. In addition, Amada tooling is through-hardened, providing you with long lasting accuracy superior to conventional tooling. Standardized Amada tooling is available in Long () and Short () lengths, providing for easy, one-operator set-up. Sectionalized Amada tooling is sectionalized as follows for convenience and efficiency: Punch (Inches):.39 +.59 +.79 + 1.57 + 1.97 + 3.94 + 3.94 + 7.87 + 11.81 = Die (Inches):.39 +.59 +.79 + 1.57 + 1.97 + 3.94 + 7.87 + 15.75 = Variety of Standardized Shapes Amada tooling is available in a wide variety of shapes to meet almost any forming need. You re assured of finding the right tooling to perform your bending operation in the most precise, efficient manner. Interchangeable Amada tooling is designed for interchangeable use on all Amada press brakes. - 2 -
COMBINATION OF DIES & PUNCHES 1. 90º BENDING (27GA 11GA) 2. 90º BENDING STRAIGHT PUNCH (27GA 14GA) 3. 90º BENDING GOOSENECK (27GA 8GA) 4. 90º BENDING DOOR SASH (27GA 14GA) 4 16 116 147 148 STANDARD DIE HOLDER 121 123 124 125 12590 126 12690 127 12790 STANDARD DIE HOLDER 108 109 121 123 124 125 12590 126 12690 127 12790 121 123 124 125 12590 126 12690 127 12790 STANDARD DIE HOLDER 45 46 47 50 51 52 150 151 452 453 462 463 200 201 202 320 321 322 324 325 326 330 5. 90º BENDING (9GA 3/8") 6. 90º BENDING (3/8" 1/2") 7. RADIUS BENDING (18GA 16GA) 8. RADIUS BENDING URETHANE DIE (27GA 11GA) 3 4 (.120R) 13 18 35 36 37 38 15 17 (.79R) 17 (.98R) 18 39 230 231 350 17 (10R) 17 (15R) 17 (17.5R) 17 (20R) 17 (25R) 17 (30R) 61 (1) 61 (2) 61 (3) 61 (4) 61 (5) 60 (1) 60 (2) 60 (3) 60 (4) 60 (5) 9. ACUTE ANGLE BENDING (27GA 14GA) 10. ACUTE ANGLE BENDING (14GA 10GA) ACUTE ANGLE BENDING 11. (10GA 6GA) 12. NARROW BOX BENDING 210 210 215 STANDARD DIE HOLDER 337 340 341 342 343 60578 60579 STANDARD PUNCH 13. HEMMING (27GA 16GA) HEMMING 14. MARK FREE BENDING (27GA 11GA) 15. 16. MATCHING 2-V DIES 2-V WITH DIES 103 15 20 STANDARD PUNCH 2 "V" DIE (P17-19) 2 "V" DIE (P20-22) 20 104 1046 12 URETHANE SHEET 42621 42618 CLAMP 300 105 STANDARD 1"V" OR 2"V" DIE WITH RADIUS OPENING 29100 29300-3 -
88º & 90º PUNCHES TOOL EDGE STANDARD ONE TOUCH RADIUS (R) ANGLE 60402 00402.008 60408 00408.030 1.024 4 60415 00415.060 60423 00423.090 88º 30 $313.00 $176.00 60430 00430.120 60448 00448.188 2.634 64802 14802.008 64808 14808.030 R 148 64815 14815.060 $436.00 88º 14 64823 14823.090 64830 14830.120 64848 14848.188 $467.00 TOOL EDGE STANDARD ONE TOUCH RADIUS (R) ANGLE 1.024 61602 01602.008 16 61608 01608.030 61615 01615.060 90º 30 $313.00 $176.00 61623 01623.090 2.634 61630 01630.120 64702 14702.008 R 64708 14708.030 147 64715 14715.060 90º 14 $436.00 1.024 64723 14723.090 64730 14730.120 TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE R 2.635.197 116 116SS* 71602 11602.008 90º 6 $441.00 $247.00 71682 11680.008 90º 3 $551.00 * Semi-Standard Length (Ear Type):.39 +.59 +.79 + 1.57 + 1.97 + 3.94 + 3.94 + 6.50 + 11.81 + = 31.50" (1 set) TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144-4 -
88º & 90º NARROW RELIEF PUNCH 1.024 2.634 TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE 60492 64892 60492 00490.008 88º 24 $431.00 $231.00 64892 14890.008 88º 12 $523.00 R.039 1.024 2.634 TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE 61692 64792 61692 01690.008 90º 24 $431.00 $231.00 64792 14790.008 90º 12 $523.00 R.039 88º & 90º MULTI RELIEF NARROW PUNCH 1.024 TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE.118 R 2.634 60482 64882 60482 00482.008 88º 12 $467.00 $252.00 64882 14882.008 88º 6 $562.00.157 2.634 1.024 TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE 61682 64782 61682 01680.008 90º 12 $467.00 $252.00 64782 14780.008 90º 6 $562.00.118 R.157-5 -
88º & 90º GOOSENECK PUNCHES 2.559 TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE 47 74702 04702.008 88º 15 $1,259.00 $725.00 4.721 52 75202 05202.008 88º 14 $1,679.00 R TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE 64502 04502.008 2.205 45 64508 04508.030 64515 04515.060 88º 15 $746.00 $384.00 64530 04530.120 4.13 65002 05002.008 R 50 65008 05008.030 65015 05015.060 88º 14 $903.00 65030 05030.120 2.205 TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE 46 64602 04602.008 90º 15 $746.00 $384.00 4.130 51 65102 05102.008 90º 14 $903.00 R TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE 65202 45202.008 2.205 452 65208 45208.030 65215 45215.060 88º 21 $670.00 $357.00 65230 45230.120 3.54 75002 15002.008 R 150 75008 15008.030 75015 15015.060 88º 14 $856.00 75030 15030.120 TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144-6 -
88º & 90º GOOSENECK PUNCHES 2.205 TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE 462 66202 46202.008 90º 21 $684.00 $365.00 3.539 151 75102 15102.008 90º 14 $872.00 R 2.205 TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE 65302 45302.008 453 65308 45308.030 65315 45315.060 88º 15 $684.00 $365.00 3.54 65330 45330.120 R.984 155 65502 15502.008 65508 15508.030 88º 9 $861.00 2.205 TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE 463 66302 46302.008 90º 15 $684.00 $365.00 3.539 156 65602 15602.008 90º 9 $861.00.984 R - 7 -
88º & 90º SASH PUNCHES 1.063 TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE 109 60902 10902.008 88º 15 $520.00 $268.00 3.740.984 107 60700 10700.008 88º 3.7 $870.00 R 1.063 TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE 108 70802 10802.008 90º 15 $520.00 $268.00 3.740.984 106 60600 10600.008 90º 3.7 $870.00 R 1.063 TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE 202 60200 20200.008 88º 9 $709.00 $404.00 3.934.984 20280 60282 20282.008 88º 5 $877.00 R 1.063 2.752.984 TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE 200 200SS* 60002 20002.008 88º 9 $446.00 $247.00 60082 20082.008 88º 5 $473.00 * Semi-Standard Length (Ear Type):.39 +.59 +.79 +1.57 + 1.97 + 3.94 + 3.94 + 6.50 + 11.81 = 31.50 (1 set) R 1.063 TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE 2.752.984 201 201SS* 60102 20102.008 90º 9 $467.00 $268.00 60182 20182.008 90º 5 $494.00 * Sem-Standard Length (Ear Type):.39 +.59 +.79 +1.57 + 1.97 + 3.94 + 3.94 + 6.50 + 11.81 = 31.50 (1 set) R TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144-8 -
ACUTE ANGLE PUNCHES 1.063 4.095.709 TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE 210 210SS* 61000 21000.026 30º 30 $578.00 $305.00 61086 21080.026 30º 9 $730.00 * Semi Standard Length (Ear Type):.39 +.59 +.79 +1.57 + 1.97 + 3.94 + 3.94 + 6.50 + 11.81 = 31.50 (1 set) R 1.024 2.614 TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE 8 49 60800 00800.015 45º 18 $354.00 $192.00 64902 04902.015 45º 9 $439.00.709 R 1.024 TOOL EDGE STANDARD ONE TOUCH ANGLE 2.638 215 71500 21500 45º 30 $446.00 $236.00 R.118-9 -
RADIUS PUNCHES 1.063 TOOL EDGE STANDARD ONE TOUCH RADIUS(R) ANGLE 3 60300 00300.240 60º 30 $331.00 $215.00 2.559 138 73800 13800.240 60º 30 $646.0 R 1.535 2.559.984 TOOL STANDARD ONE TOUCH 230 231 EDGE (R) 63000 23000 0.689 30 $663.00 $341.00 63100 23100 0.689 30 $763.00 R FLATTENING PUNCHES 1.575 STANDARD ONE TOUCH 2.559 220 62000 22000 30 $488.00 $257.00.906.669 1.102 20 02000 30 $120.00 $71.00 Mounts in #15 Punch Holder (shown on next page) Hardness HRC is 23-28. TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144-10 -
PUNCH HOLDERS & RADIUS RULERS PUNCH HOLDER 1.063 STANDARD ONE TOUCH 2.638 15 61500 01500 $258.00 $154.00 Hardness HRC is 23-28..551 RADIUS RULERS.375.63 EDGE (R) 01737 01737.375 30 $116.00 $63.00 Hardness HRC is 23-28. Mounts on #15 Punch Holder..63 EDGE (R) 01710 01710 30 $83.00 $47.00 Hardness HRC is 23-28. Mounts on #15 Punch Holder. EDGE (R).866 01750 01750.500 30 $123.00 $79.00.500 Hardness HRC is 23-28. Mounts on #15 Punch Holder. - 11 -
PUNCH HOLDERS & RADIUS RULERS 1.063 EDGE (R) 01715 01715.591 30 $108.00 $62.00.591 Hardness HRC is 23-28. Mounts on #15 Punch Holder. EDGE (R) 1.063 01762 01762.625 30 $128.00 $81.00.625 Hardness HRC is 23-28. Mounts on #15 Punch Holder. EDGE (R).866 1.26 01717 01717.689 30 $114.00 $68.00.689 Hardness HRC is 23-28. Mounts on #15 Punch Holder..945 1.339 EDGE (R) 01775 01775.750 30 $161.00 $109.00.750 Hardness HRC is 23-28. Mounts on #15 Punch Holder. EDGE (R).945 1.339 01720 01720 30 $139.00 $75.00 Hardness HRC is 23-28. Mounts on #15 Punch Holder. TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144-12 -
PUNCH HOLDERS & RADIUS RULERS EDGE (R) 1.063 1.457 01787 01787.875 30 $210.00 $122.00.875 Hardness HRC is 23-28. Mounts on #15 Punch Holder..984 1.142 1.535 EDGE (R) 01725 01725.984 30 $163.00 $98.00 Hardness HRC is 23-28. Mounts on #15 Punch Holder. 1.00 1.142 1.535 EDGE (R) 01700 01700 1.000 30 $197.00 $122.00 Hardness HRC is 23-28. Mounts on #15 Punch Holder. 1.339 1.732 EDGE (R) 01730 01730 30 $200.00 $118.00 Hardness HRC is 23-28. Mounts on #15 Punch Holder. - 13 -
QUICK CHANGE 2 "V" DIES.138.157.197.276 TOOL 501 50190 90º 18 $362.00 $205.00 1.811 501 50180 90º 18 $436.00 1.358.177.236.256 TOOL 502 50290 90º 21 $362.00 $205.00 1.811 502 50280 90º 21 $436.00 1.457.217.315.295 TOOL 503 50390 90º 21 $362.00 $205.00 1.811 503 50380 90º 21 $436.00 1.535.335.551.413.709 TOOL 504 50490 88º 30 $362.00 $205.00 1.811 504 50480 88º 30 $436.00 1.772 TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144-14 -
QUICK CHANGE 2 "V" DIES.295 TOOL 505 50590 88º 30 $362.00 $205.00 1.811 505 50580 88º 30 $436.00 1.791.374.571.63.984 1.811 TOOL 506 506 50690 88º 30 $362.00 $205.00 50680 88º 30 $436.00 1.969.236.236.315 TOOL 1.811.059.098 511 511 51190 90º 24 $446.00 $336.00 51180 90º 24 $551.00 1.575 Die has larger shoulder radius for reduced die marks..551 TOOL 1.811.118.157 514 514 51490 88º 30 $446.00 $336.00 51480 88º 30 $551.00 1.969 Die has larger shoulder radius for reduced die marks. - 15 -
QUICK CHANGE ACUTE ANGLE 2 "V" DIE.492 1.575.315 1.024.551 TOOL 50337 50338 50337 30º 6 $651.00 $521.00 50338 30º 6 $781.00 2.067 TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144-16 -
88º & 90º 2 "V" DIES.138.157.197.276 1.024 121 12100 90º 18 $215.00 $126.00 1.969.177.236.256 1.024 123 12300 90º 21 $215.00 $126.00 1.969.217.315.295 1.024 124 12400 90º 24 $215.00 $126.00 1.969.335.551.413.709 1.024 125 12500 88º 30 $215.00 $126.00 1.969-17 -
88º & 90º 2 "V" DIES.335.551.413.709 1.004 1.969 12590 12590 90º 30 $215.00 $126.00.295 1.024 126 12600 88º 30 $215.00 $126.00 1.969.295 1.004 12690 12690 90º 30 $215.00 $126.00 1.969.374.63.571.984 1.024 127 12700 88º 21 $215.00 $126.00 1.969 TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144-18 -
88º & 90º 2 "V" DIES.374.63.571.984 1.004 12790 12790 90º 21 $215.00 $126.00 1.969.236.236 1.024.059.098 311 31100 90º 24 $226.00 $131.00 Die has larger shoulder radius for reduced die marks..591 1.024.118.157 2.165 314 31400 88º 30 $226.00 $131.00 Die has larger shoulder radius for reduced die marks. ACUTE ANGLE 2 "V" DIE.571.709.315 1.496 337 33700 30º 9 $351.00 $210.00-19 -
88º & 90º 2 "V" DIES.138.197.157.276 1.811 30140 30140 90º 18 $431.00 1.969 Sectionalized match to die #121..177.256.236 1.811 30240 30240 90º 21 $431.00 1.969 Sectionalized match to die #123..217.295.315 1.811 30340 30340 90º 21 $431.00 1.969 Sectionalized match to die #124..335.413.551.709 1.811 30440 30440 88º 30 $431.00 1.969 Sectionalized match to die #125. TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144-20 -
88º & 90º 2 "V" DIES.335.413.551.709 1.791 30449 30449 90º 30 $431.00 1.969 Sectionalized match to die #12590..295 1.811 30540 30540 88º 30 $431.00 1.969 Sectionalized match to die #126..374.571.630.984 1.811 30640 30640 88º 30 $431.00 1.969 Sectionalized match to die #127..236.236 1.811.059.098 31140 31140 90º 24 $436.00 2.165 Sectionalized match to die #311. Die has larger shoulder radius for reduced die marks. - 21 -
88º & 90º 2 "V" DIES.591 1.811.118.157 31440 31440 88º 30 $436.00 2.165 Sectionalized match to die #314. Die has larger shoulder radius for reduced die marks. LOW PROFILE 2 "V" DIES.177.236.256.63 30210 30210 90º 21 $347.00 1.969.217.315.295.63 30310 30310 90º 21 $350.00 1.969 ACUTE ANGLE 2 "V" DIES.571.709.315 2.283 33840 33840 30º 9 $919.00 TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144-22 -
DIE RAIL & HOLDERS DIE RAIL.590 300 30000 30 $205.00 $105.00 1.969 Hardness HRC is 23-28. HOLDERS 1.535 29000 29000 $215.00 $121.00 Hardness HRC is 23-28. 1.772 29300 29300 $200.00 $143.00 Hardness HRC is 23-28. 2.953 29100 29100 $368.00 $236.00 Hardness HRC is 23-28. - 23 -
88º & 90º SASH 1 "V" DIES.236.551 320 32000 90º 29 $184.00 $117.00.315.551 321 32100 90º 29 $184.00 $117.00 322 32200 88º 29 $184.00 $117.00 323 32300 90º 29 $184.00 $117.00.591 324 32400 88º 30 $184.00 $117.00 326 32600 90º 30 $184.00 $117.00.669.551.709 325 32500 88º 30 $184.00 $117.00 TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144 24
RAIL TYPE SASH 1 "V" DIES.551.236 70 07000 90º 29 $446.00 $242.00.984 70 07080 90º 29 $546.00.591.551.315 71 07100 90º 29 $446.00 $242.00.984 71 07180 90º 29 $546.00.591.591 72 07200 88º 29 $446.00 $242.00.984 72 07280 88º 29 $546.00.591.984.591.591 73 73 07300 90º 29 $446.00 $242.00 07380 90º 29 $546.00 25
RAIL TYPE SASH 1 "V" DIES.669.984 74 74 07400 88º 29 $446.00 $242.00 07480 88º 29 $546.00.591.984.591.709.551 75 75 07500 88º 29 $446.00 $242.00 07580 88º 29 $546.00.984.591.669 76 76 07600 90º 29 $446.00 $242.00 07680 90º 29 $546.00 TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144 26
ACUTE ANGLE 1 "V" DIES.550.157 4121 41210 30º 5.2 $671.00 $440.00.059.590 1.570 4121 41219 30º 5.2 $1,035.00.790.0790.630.236 1.570.590 4123 4123 41230 30º 4.9 $671.00 $440.00 41239 30º 4.9 $1,035.00.790.315 4124 41240 30º 5.5 $671.00 $440.00.0790 1.690 4124 41249 30º 5.5 $1,035.00.750 4125 41250 30º 6.4 $973.00 $617.00.120 1.890 4125 41259 30º 6.4 $1,362.00.940 27
ACUTE ANGLE 1 "V" DIES 2.170 4126 4126 41260 30º 7.0 $1,152.00 $671.00 41269 30º 7.0 $1,518.00 1.100.551 4127 41270 30º 8.2 $1,152.00 $671.00.1570 2.280 4127 41279 30º 8.2 $1,518.00 1.260.630.157 2.560 4128 4128 41280 30º 9.4 $1,383.00 $849.00 41289 30º 9.4 $1,769.00 1.420 TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144 28
SASH 1 'V" DIE RAIL & HOLDERS DIE RAIL.433.591 30 30009 $306.00 Hardness HRC is 23-28. HOLDERS.551 3.209 330 33000 $415.00 $263.00 Hardness HRC is 23-28..551 2.421 80 08000 $826.00 Hardness HRC is 23-28. LARGE "V" DIE HOLDER 1.969 50008 50008 $374.00 $207.00 Hardness HRC is 23-28. 29
LARGE "V" DIES.709 340 34000 30º 24 $273.00 $163.00 Hardness HRC is 43-47. Mounts on #50008 Die Holder..984 2.559 341 34100 30º 18 $307.00 $184.00 Hardness HRC is 43-47. Mounts on #50008 Die Holder. 1.26 342 34200 45º 12 $302.00 $187.00 Hardness HRC is 43-47. Mounts on #50008 Die Holder. TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144 30
LARGE "V" DIES 1.575 3.15 343 34300 45º 21 $454.00 $271.00 Hardness HRC is 43-47. Mounts on #50008 Die Holder. 3.15 1.260 35 03500 85º 30 $247.00 $131.00 Hardness HRC is 43-47. Mounts on #50008 Die Holder. 1.575 36 03600 85º 30 $278.00 $152.00 Hardness HRC is 43-47. Mounts on #50008 Die Holder. 1.969 37 03700 85º 30 $273.00 $168.00 Hardness HRC is 43-47. Mounts on #50008 Die Holder. 31
LARGE "V" DIES 2.480 2.953 38 03800 85º 30 $541.00 $289.00 Hardness HRC is 43-47. Mounts on #50008 Die Holder. 3.150 3.15 3.74 13 01360 85º 30 $735.00 $462.00 3.74 Hardness HRC is 43-47. Mounts on #50008 Die Holder. 3.937 4.331 18 01860 85º 30 $1,364.00 $772.00 4.724 Hardness HRC is 43-47. Mounts on #50008 Die Holder. 4.921 3.543 6.063 4.843 Hardness HRC is 43-47. 39 03900 80º 30 $1,323.00 $794.00 TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144 32
LARGE "V" DIES 1.417.748 R 350 35000 30 $429.00 $256.00 Hardness HRC is 43-47. Mounts on #50008 Die Holder. FLATTENING DIES.709 12 01200 30 $256.00 $155.00 Hardness HRC is 23-28. Mounts on #50008 Die Holder..236 3.937 3.780 105 10500 30 $998.00 $588.00 Hardness HRC is 43-47. 33
POLYURETHANE DIES & DIE HOLDERS Holders.984 HEIGHT (H) 60 (1) 06001 $425.00 $251.00 Hardness HRC is 23-28. Mounts on #50008 Die Holder. 1.693 HEIGHT (H) 60 (2) 06002 1.693" $404.00 $236.00 Hardness HRC is 23-28. Mounts on #50008 Die Holder. 1.969 3.937 HEIGHT (H) 60 (3) 06003 3.937" $1,168.00 $630.00 3.937 Hardness HRC is 23-28. Mounts on #50008 Die Holder. 3.150 3.268 HEIGHT (H) 60 (4) 06004 3.268" 1,154.00 $705.00 4.724 60 (5) 06005 4.252" $1,780.00 $1,049.00 Hardness HRC is 23-28. Mounts on #50008 Die Holder. TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144-34 -
POLYURETHANE DIES & DIE HOLDER Dies TOOL A B A 61 (1) 06111 RED*.984".984" $47.00 $26.00 06112 BLUE**.984".984" $64.00 $34.00 B 61 (2) 61 (3) 06121 RED* " " $56.00 $29.00 06122 BLUE** " " $68.00 $37.00 06131 RED* 1.969" 1.969" $194.00 $100.00 06132 BLUE** 1.969" 1.969" $242.00 $131.00 TOOL A B A 61 (4) 06141 RED* 3.150" " $173.00 $92.00 06142 BLUE** 3.150" " $247.00 $123.00 B 61 (5) 06151 RED* 4.330" 1.772" $378.00 $192.00 06152 BLUE** 4.330" 1.772" $483.00 $252.00 STANDARD OFFSET TOOLS *80 Shore "A" scale hardness **90 Shore "A" scale hardness WIDTH (A) MAX MATERIAL (CRS) (4835mm) 60421 60421.125" 30 18 GA $1,045.00 60422 60422.188" 30 18 GA $1,045.00 60229 60229.250" 30 18 GA $1,045.00 A 60424 60424.375" 30 16 GA $1,045.00 60425 60425.500" 30 16 GA $1,045.00 A 60426 60426.313" 30 16 GA $1,045.00 60427 60427.438" 30 16 GA $1,045.00 Hardness HRC is 23-28. Tolerances after bending, using the above offset tools = +/-.020. Specify standard or One Touch style. -35 -
HEMMING PUNCH & DIES PUNCH 1.063 TOOL EDGE STANDARD ONE TOUCH EDGE (R) ANGLE 2.579 R.315 103 10380* 70300 10300.020 30º 30 $418.00 $242.00 70380 10380.020 30º 30 $551.00 R.02.709 *Semi-Standard Lenghth (Ear Type):.39 +.59 +.79 + 1.57 + 1.97 + 3.94 + 3.94 + 6.50 + 11.81 = 31.50" (1 set) DIE ASSEMBLY.63 A 4.606 R.039 MAX MATERIAL 104 10409 16 GA CRS 18 GA SS.315" 1046 10469 18 GA CRS 20 GA SS.236" A 20 $1,118.00 $671.00 20 $1,118.00 $671.00 REPLACEMENT DIE BLOCK.63 A A R.039.906 104R 80139.315" 20 $473.00 $289.00 1046R 80149.236" 20 $473.00 $289.00 1.811 TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144-36 -
ASTRO ROBOTIC TOOLING PUNCH ANGLE (LONG) (SHORT) 51100 51200 88º $1,271.00 $665.00 $1,464.00 90.00 HINGED EAR SECTIONS FOR ABOVE PUNCH DESCRIPTION R.6 51300 HINGED EAR SECTIONS $2,370.00 88º DESCRIPTION V (Z) (LONG) (SHORT) DIE 80400 80480.157" 90º $1,187.00 $893.00 $1,523.00 Z V 80408 80488.157" 88º $1,187.00 $893.00 $1,523.00 80600 80680.236" 90º $1,187.00 $893.00 $1,523.00 80608 80688.236" 88º $1,187.00 $893.00 $1,523.00 80800 80880.315" 90º $1,187.00 $893.00 $1,523.00 80808 80888.315" 88º $1,187.00 $893.00 $1,523.00 60 81000 81080 " 90º $1,187.00 $893.00 $1,523.00 81008 81088 " 88º $1,187.00 $893.00 $1,523.00 81200 81280 " 90º $1,187.00 $893.00 $1,523.00 81208 81288 " 88º $1,187.00 $893.00 $1,523.00 81400 81480.551" 90º $1,187.00 $893.00 $1,523.00 81408 81488.551" 88º $1,187.00 $893.00 $1,523.00 DIE HOLDER DESCRIPTION (LONG) (SHORT) 53200 ASTRO DIE HOLDER $987.00 $593.00 _ - 37 -
ONE TOUCH HOLDERS & ACCESSORIES ONE TOUCH PUNCH HOLDER 902000 $368.00 Reduce tooling set-up time Increase safety with the drop-prevention feature Insure properly tightened tools every time Increase productivity of the bending process No tools required to tighten punch For use on ZII style RG model press brake and all FBD, HFB & HFE model press Brakes. Z1 STYLE ONE TOUCH PUNCH HOLDER 901000 $368.00 All the same features and benefits as the holder shown above for the ZI style RG Model Amada press brake. Will also mount to Guifil press brake and some other European design press brakes. Please consult your Tooling Product Specialist or the Tooling Order Desk to check compatibility. NARROW DISTANCE PIECE SET 908000 $835.00 These narrow punch holders replace the standard One Touch punch holder when the standard size of punch holder interferes with the part being formed. These allow clearance for side flanges that would normally hit the standard punch holder, while holding the punch securely during use. Set contains widths of 25mm, 35mm,40mm and 50mm. TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144-38 -
PRESS BRAKE ACCESSORIES DEEP PUNCH HOLDER 7.784" (200 mm) 94000 94000 10 $814.00 Hardness HRC is 23-28. Specify standard or One Touch style. QUICK SET DIE HOLDER Lock or unlock a full bed-length of die with one twist of a handle. Modular design allows multiple die holders to be operated by one handle. Same profile as standard die holder (H=75mm). 90400 90400 $641.00 $415.00 Bolts and washers/set for use with Quick-Set Die Holder 90500 90500 $40.00 SIDE GAUGE AND ADJUSTABLE ANGLE SIDE GAUGE Side Gauge Side Gauge used to square parts with the bend line. Mounts directly on "V" die to help correctly align those small, hard to handle parts. 93000 93000 $309.00 Adjustable Angle Side Gauge Same as Side Gauge but with a squaring arm that rotates 100 to provide "bending at an angle." 93200 93200 $777.00-39 -
PRESS BRAKE ACCESSORIES FRONT AND REAR CLAMP ASSEMBLY DESCRIPTION 92500 92500 Clamp Assembly Set $41.00 96400 96400 Clamp Plate $25.00 96200 96200 Hardware Set $16.00 SLEEVED RADIUS RULER - CR 30 Sleeved Radius Ruler forms 9 different radii with one tool. Sleeves slide on to form radii from " to ". Available in long (), short () and sectionalized lengths. Mounts in any Amada press brake. LENGTH 03000 03000 $698.00 03000 03000 $368.00 03080 03080 $1,512.00 Specify standard or One Touch style. HINGED EAR SECTIONS Hinged Ear Sections are used for accommodating channeled return flanges on the press brake. Available in #4, #16, #453, and #463 style punches with.008" radius. Allows for easy removal of pans and boxes with return flanges around perimeter of part. Eliminates springing open of flanges to remove part from tooling. Reduces operator fatigue and part rejects. PUNCH TYPE PER SET* 40402 40402 #4 $1,738.00 Hinged ear drops down to release part Precision ground tooling allows hinged portion to mate with punch without leaving marks on part 41602 41602 #16 $1,738.00 43302 43302 #453 $1,974.00 44302 44302 #463 $1,974.00 *Each set includes a left and right hinged ear section Specify standard or One Touch style. TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144-40 -
PRESS BRAKE ACCESSORIES NARROW PUNCH HOLDER #60578 Allows greater clearance between punch holders for more flexibility. For use on Z-1 press brakes or for stacking with Z-2 style holder. #60579 Same as above, but for use on Z-2 style press brakes only. #60578 #60579 60578 $297.00 60579 $297.00 URETHANE ROLL DESCRIPTION 42621.015" thick urethane for mark-free bending for use on 16 ga. mat l and thinner. $158.00 42618.030" thick urethane for mark-free bending for use on 16 ga. mat l and thicker. $215.00 Both urethane rolls above are 6" wide x 100' long. MARKLESS MATERIAL PROTECTION DESCRIPTION 92002023 92002024 REPLACEMENT MATERIAL (LIGHT) (12 ROLLS ) (EACH ROLL CONTAINS 25'OF MATERIAL) REPLACEMENT MATERIAL (HEAVY) (12 ROLLS ) (EACH ROLL CONTAINS 25'OF MATERIAL) $295.00 $295.00 PRESS BRAKE CABINET DESCRIPTION 99570220 99570211 99570212 99570213 99570214 BASIC PRESS BRAKE CABINET OPTIONAL MOBILE BASE KIT (SHOWN) OPTIONAL FORK LIFT BASE MAPLE COUNTERTOP FOR CABINET RETAINER TOP W/MAT $1,495.00 $295.00 $45.00 $175.00 $65.00 Shown with optional mobile base kit. - 41 -
PRESS BRAKE ACCESSORIES REPLACEMENT PARTS REPLACEMENT CLAMP PLATE WITH SAFETY TONGUE DESCRIPTION 96100 96100 Clamp Plate $27.00 REPLACEMENT "V" DIE BOLTS DESCRIPTION 80010 80010 Set Bolt for 2V Die M8 X 25 $1.00 80020 80020 Spring for 1V Die and 2V Die $2.00 80030 80030 Washer for 2V Die M8 $2.00 80040 80040 Set Bolt for 1V Die M8 X 30 $1.00 80050 80050 Washer for 1V Die $4.00 Long size die requires 4 sets of bolts, springs and washers. Short size die requires 2 sets of bolts, springs and washers. REPLACEMENT BOLTS FOR HEMMING TOOL DESCRIPTION 80069 80069 M8 X 55 Stripper Bolt $3.00 80080 80080 Spring $4.00 TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144-42 -
AIR BENDING FORCE CHART Die Opening Selection Formula t GAUGE 12 OR LESS 11-5/16" 3/8" - 1/2" 5/8" UP INCHES.105 OR LESS.120 -.313.375 -.500.625 AND UP "V" SIZE 6 X t 8 X t 10 X t 12 X t The above formulas are for reference only. For more detailed information refer to the chart below. If the material thickness and inside bend radius are known, the following can be obtained from the chart below: 1. Pressure required for bending the material for 1 foot. 2. Opening of the die to be used. 3. Minimum bendable flange length. t F ir b v Material thickness (tensile strength: 56892-71115 lbs/in 2 Tons per 1 foot Inside bend radius Minimum flange length Die opening t ir V F b TONS/FT INSIDE RADIUS OF BEND MIN. FLANGE LENGTH WIDTH OF V DIE OPENING GAUGE t DEC. THICKNESS MILD STEEL 4 6 7 8 10 12 14 16 18 20 25 32 40 50 63 80 100 125 160 200 250.156.250.281.313.375.500.563.625.688.750 1.000 1.250 1.500 2.000 2.500 3.000 4.000 5.000 6.000 8.000 10.000 mm inches v.125.188.203.219.281.344.406.438.531.563.688.875 1.125 1.375 1.750 2.188 2.188 3.500 4.500 5.500 6.875 inches b.031.031.047.047.063.078.094.109.125.141.156.203.250.313.406.516.625.750 1.031 1.313 1.625 inches ir 20 0.036 5.4 3.6 3.0 2.5 2.0 1.7 18 0.048 6.8 5.8 4.8 3.7 2.7 2.4 2.0 16 0.060 7.8 6.2 5.0 4.2 3.5 3.1 2.7 14 12 0.075 0.105 11.0 8.2 7.0 5.5 4.8 4.1 3.1 15.0 13.0 11.0 9.4 7.4 5.5 4.0 F 11 0.120 16.0 13.0 10.0 7.3 5.0 3.8 10 0.135 12.0 9.0 6.2 4.7 3.5.188 0.188 24.0 15.0 11.0 7.5 5.7.250 0.250 30.0 20.0 14.0 10.5 8.5.313 0.313 36.0 25.0 18.0 13.0 10.0.375 0.375 38.0 28.0 20.0 15.0 11.0.500 0.500 52.0 39.0 30.0 22.0 16.0.625 0.625 70.0 52.0 38.0 27.0 20.0 15.0.750 0.750 66.0 43.0 32.0 22.0 1.000 1.000 90.0 61.0 44.0 1.250 1.250 102.0 70.0 Force required per linear foot to bend mild steel with air bend dies. (Measured in tons.) TONS/FT - 43 -
R TOOLING ORDER FAX FORM 1-800-423-7144 7025 FIRESTONE BLVD. BUENA PARK, CA 90621 PHONE: (800) 588-6683 FAX: (800) 423-7144 DATE: ACCOUNT : PURCHASE ORDER : MACHINE TYPE : COMPANY : COMPANY CONTACT: SHIP TO ADDRESS: CITY: STATE: ZIP: PHONE: FAX: SHIP VIA: (PLEASE CHECK ONE) UPS OVERNIGHT AM UPS OVERNIGHT UPS 2 DAYS UPS 3 DAYS UPS GROUND (5~7 DAYS) OTHER PUNCH STYLE: STANDARD ONE TOUCH SPECIAL INSTRUCTIONS: QTY CODE NO. DESCRIPTION
NOTES TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
TERMS AND CONDITIONS CREDIT/PAYMENT All purchases are COD unless credit approved. If account is past due, Amada America, Inc. reserves the right to hold shipment or require COD terms. Credit/Payment terms are Net 30 days from date of invoice. Past due accounts are subject to interest charges. No early payment or cash discounts are allowed. ORDERS Minimum of $25.00. Please write your Amada America, Inc. customer account number on all purchase orders to speed processing. Also, please specify machine model, material type and thickness. F.O.B. All orders are F.O.B. shipping point. SPECIAL ORDERS All special orders are non-cancelable, non-returnable, and non-refundable. RETURNED MATERIAL Accepted only with prior approval of Amada America, Inc. s Tooling Department Manager. There will be a 25% re-stocking fee on all standard items. All items must be returned unused and freight prepaid. No returns will be allowed beyond 30 days of original shipment. DELIVERY Delivery on special items will be established at time of order. PURCHASE ORDER Purchase order number must accompany all telephone orders. Verbal orders will not be processed without a purchase order number. DAMAGE OR SHORTAGE CLAIMS All claims must be made within ten calendar days of receipt of tooling. PRICING All prices in this catalog are subject to change without notice. All prices provided by Amada America, Inc. in the form of a written quotation are valid for thirty days following the date of the quote.
R 7025 FIRESTONE BLVD BUENA PARK, CALIFORNIA 90621 (714) 739-2111 FAX (714) 739-4099 www.amada.com M21-1-0805