Hines Industries, Inc. The Hines Difference For twenty five years, Hines Industries has been setting the standard in the performance industry. In 1979, Gordon Hines founded Hines Industries on two basic principles. It was to offer superior products at competitive prices. His philosophy led to the development of many patented designs, which are now industry standards. They say that imitation is the sincerest form of flattery we would just like to say thank you to our competitors. The Liberator, Dominator and Eliminator crankshaft balancers from Hines set a new standard in the performance world offering features and options once only available on larger, more expensive industrial machines. The liberator and dominator offer the following standard features:! Heavy Metal Analysis multi-slug calculations! Heavy Metal Analysis single-slug calculations! Multi Hole Corrections weight removal! Single/Two plane Balancing Capability! Add/Remove Mode Calculations! Part Setup Storage Capability! Pass/Fail Mode! Engine Build Sheet printable and storage! Bobweight Card printable and storable! Advanced Printing Capability! Windows XP Operating System The Eliminator offers the following standard features:! Single/Two Plane Balancing Capability! Add/Remove Mode Calculations! Part Setup Storage Capability! Pass Fail Mode
! E-PROM Based Memory! Industrial Processor! Monochrome 240 x 128 LCD Display! Membrane Keypad Eliminator Computer! 686 Computer! 533 MHz Industrial Processor! 40 GB Hard Drive! 64MB PC100 SDRAM! LCD Display Dominator Computer Liberator Computer! 686 Computer! 533 MHz Industrial Processor! 40 GB Hard Drive! 64MB PC100 SDRAM! 19 Flat Screen Monitor! Mounted on removable slide for ease of diagnosis and repair
Eliminator Balancing Machine
Dominator Balancing Machine
Liberator Balancing Machine
The Liberator Advantage As they say, time is money and that is why we have the new Liberator crankshaft balancer. The revolutionary design encompasses a workstation for all balancing operations. Now rod and piston corrections and bobweight calculations can be done without leaving the machine. The Liberator comes standard with a workstation cabinet offering a 24 x 36 working area. Also included are two storage shelves with lockable doors. The unit includes a wire rack storage system for bobweights and rod adapters. The unit also comes with a color 19 flat screen monitor and custom keyboard tray. All electronic components are mounted on a slide tray in the cabinet. In the event the unit has to be serviced, the tray can be removed in minutes and boxed for shipping. The advantage to this design is that the tray includes all the electronic components ensuring a proper diagnosis and timely repair. The Liberator is the latest in crankshaft balancing technology.
P/N 200-0178 Rong Fu Gear Head Mill Drill! 21 swing diameter! Gear head drive! R8 collet! 220 VAC 1 hp 60 Hz! Three jaw chuck! R8 to #3 Morse taper adapter! Optional X/Y table (P/N 510-0080) Mechanism Air Lock/Slide Allows operator to position drill for part correction. The mill/drill mounts to a ground table which rides on a precision ground rail. The drill is locked into place via a palm switch which activates an air actuated Zimmer lock mechanism. Mill Drill: 6 ft. Base (P/N 200-0190) 8 ft. Base (P/N 200-0195) Drill Only: 6 ft. Base (P/N 200-0192) 8 ft. Base (P/N 200-0196)
Graphic Depth Indicator Provides a computer interface showing required correction in a bar graph format allowing the operator to make precision corrections (P/N 370-0083 Dominator & Liberator only) Digital Depth Indicator A digital measuring instrument which allows the operator to measure the depth of the correction (P/N 370-0078 available on all models) Cyclone Chip Removal System Operating off shop air, it creates a vacuum that draws the chips into a 22 gallon container. Includes 5 sets of bushings, Cyclone vacuum block, and steel container (P/N 510-0108)
Compu-Match Provides a computer interface to the scale automating the weight matching process. The program will walk the operator through the entire rod and piston weight matching process. Information is automatically sent to an electronic bobweight card on the system. The card can be printed or stored for future retrieval. Includes: Software Scale with rod hanging adapter Scale interface cable (P/N 510-0111) Hines manufactures its own bobweights. Bobweights V-8 Standard Bobweights: set of 4. includes: weight kit (P/N 510-0086) V-8 Standard Bobweights: set of 4. includes: weight kit, with quick release nuts (P/N 510-0087) V-8 Premium Bobweights: set of 4. includes: weight kit, with guide pins and quick release nuts (P/N 510-0088) V-6 Standard Bobweights: set of 6. includes: weight kit, with quick release nuts (P/N 510-0089) V-6 Premium Bobweights: set of 6. includes: weight kit, with guide pins and quick release nuts (P/N 510-0090) V-6/V-8 Combination Bobweights: set of 6. includes: weight kit, with guide pins and quick release nuts (P/N 510-0114) V-6/V-8/V-10 Combination Bobweights: set of 6. includes: weight kit, with guide pins and quick release nuts (P/N 510-132)
Flywheel Balancing Mandrel Cone style mandrel, stress proof, and factory balanced. Includes: 3 cones and locking nut. (P/N 510-0107) \ Test Rotor This is the same test rotor that is used during the factory calibration process. Machined from aluminum. Incudes: (2) 1oz test weights and wooden carrying case (P/N 150-0107) Drill Platform and Clamps Expand the capability of your machine by adding a drill platform. Platform mounts in the trough of the balancer. The crank is suspended in a vertical position which allows correction to be done axially. Used for heavy metal installation. (P/N 510-0031)
Roller Bearing Kit Designed to be used in conjunction with heavier parts that create too much friction for the traditional nylatron V-blocks. The roller bearing kit mounts in place of the existing V- block assembly. Installation can be done in a matter of minutes. (P/N 110-0131) Driveline Option The driveline option package expands the capabilities of the standard machine to include balancing of single piece automotive and truck driveshafts. This option includes (2) six jaw chucks which can be installed in a matter of minutes. The chucks are designed to work with production yokes (customer supplied). The yokes will act as tooling to secure the shaft. The left chuck includes a pulley that drives the part (P/N 380-0142)
Machine Specifications Machine Dimensions: Length 6 ft. (optional 8 ft.) Height 5 ft. (with drill 7 ft.) Width 30 in. Width including mill table 45 in. Weight: Machine 3,260 lbs. Eliminator (ship weight) 3,460 lbs. Dominator (ship weight) 3,460 lbs. Liberator (ship weight 2 skids) Drill 450 lbs. (ship weight) Mill/Drill 790 lbs. (ship weight) Power requirements: Machine 115VAC/1ph/60Hz Drill 220VAC/1ph/60Hz Scale 115VAC/1ph/60Hz Machine Capacities: Weight capacity 500 lbs. Weight per stanchion 250 lbs. Max. dia. between stanchions 36 in. Max/Min bearing to bearing 5-56 in. Diameter at support bearing ½-4 ½ in. Drive diameter range 1-8 in. Balance Sensitivity: +/-0.01 oz/in Drill Specifications: Max/Min RPM 60-1500 Swing 21 in. Spindle taper M.T.#3 or R-8 Spindle stroke 5 in. Hines Industries, Inc. 793 Airport Blvd. Ann Arbor, MI. 48108 Ph: (734) 769-2300 (ask for Automotive Aftermarket Sales) FAX: (734) 996-9192 or visit us at http://www.hinesindustries.com E-Mail: Aftermarketsales@hinesindustries.com