SANY Rotary Drilling Rig With CFA System

Add: SANY Industrial Region, Beiqing Road, Huilongguan, Changping District, Beijing, P.R. China Zip code: 102206 Fax: 0086-10-80727043 Customer support: 0086-10-80727122 Website: http//:www.bjsany.com Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. Final data and configuration are according to contract or real rig. The price varies according to the configuration. SANY Rotary Drilling Rig With CFA System The copyright is reserved by SANY, and any content is forbidden to be used for other purpose without written permission of SANY. China print no.: BZSRX0303EN(10-09)-SR150M/200M/250M/280M

Machine SANY rotary drilling rig with CFA system blends productivity and durability to give you the best return on your investment. SR150 M Technical Data Page 1-2 Chassis Page 9 Driving Mechanism Page 11 Cab Page 14 SR200M Technical Data Page 3-4 Engine Page9 Kelly Bar/CFA Page 12 Convenient Maintenance Page 15 SR250M Technical Data Page 5-6 Hydraulic System Page10 Drilling Tools Page 12 Safety Page 15 SR280M Technical Data Page 7-8 Control System Page10 Working Equipment Optional Page 13 Customer Support Page 16

SR150M Technical Data Multi-function: drilling with Continuous Flight Auger (max. drilling dia. Φ 750mm and max. drilling depth 17m) or with Kelly system (max. drilling dia. Φ 1500mm and max. drilling depth 46m) after replacing related components. CFA drilling system 17 m (55.8 ft) Dry drilling without slurry circulation to facilitate drilling with 750 mm ( 2 6 ) fewer accessories and to avoid pollution. Max. extraction force 320 kn (71939 lbf) The rig owns a high drilling efficiency due to the rotary drive 150 kn.m (110633 lbf.ft) with large output torque. Kelly drilling system Auger cleaner to reduce labor intensity. 46 m (151 ft) Cummins QSB6.7-190 (EU / EPA Tier 3 III) or Isuzu CC- 1500 mm (4 11 ) 6BG1TRP(EU stage II/EPA Tier 2) stage intercooler diesel Drilling speed 7-40 rpm engine owns the functions of load-sensing and output power 150 kn.m (110633 lbf.ft) auto-adjusting; auto accelerating/decelerating function, fuel Crowd cylinder max. push 150 kn (33721 lbf) consumption can be reduced by 5-10%. Stroke 4250 mm (13 11 ) Embedded system based on work mechanism controller and Main Winch perfect CAN-BUS technique to take full charge of whole 160 kn (35970 lbf) machine monitoring. 70 m/min (2.6 mph) Hydraulic pump, motor, valve and joint are introduced in 28 mm (1.1 in) well-known brands to ensure high reliability of system; main Auxiliary Winch oil circuit adopts advanced negative control technology and auxiliary oil circuit adopts load sensitive control system, which assures the optimal match of output power and load under all kinds of operating conditions. Meet the standards of city construction law due to its low noise, slight vibration and little pollution during drilling. 60 kn (13490 lbf) 60 m/min (2.2 mph) 14 mm (0.55 in) SR150M 4455 700 2' 4" 3100 4100 10' 2"-13' 5" 14' 7" Mast Inclination Forward 5 CFA backward 15 Sideward ±5 Whole Machine System pressure 34.3 MPa (4975 psi) Pilot pressure 4 MPa (580 psi) Traction force 210 kn (47210 lbf) Transport width 3100 mm (10 2 ) Operating width 4100 mm (13 5 ) Transport height 3305 mm (10 10 ) Transport length 12475 mm (40 11 ) Work weight 41 t ( 40.4 long ton) SR150M Engine Cummins Model QSB6.7-190 Style 4-stroke water-cooled overhead valve type 1 Turbocharger; inter cooler Fuel light oil (JIS Type 2) Emission regulation EU stage III / EPA Tier 3 No. of cylinder - bore stroke 6-107 124 mm / 6-4.21 4.88 in Displacement 6.7 L / 409 in³ Rated power 142 kw(190 hp)@2200 rpm Max. torque 931 N.m(687 lbf.ft)@1400 rpm Fuel consumption ( 100% output) SANY SR150M/200M/250M/280M Rotary Drilling Rig with CFA System 3100 10' 2" Direct injection Intake form 221 g/(kw.h) SR150M 0.363 lbs/(hp.h) Note: Isuzu CC-6BG1TRP engine is optional. Quality Changes the World 2

Multi-function: drilling with Continuous Flight Auger (max. SR200M Technical Data drilling dia. Φ800mm and max. drilling depth 20m) or with Kelly system (max. drilling dia. Φ 1800mm and max. drilling depth 60m) after replacing related components. Dry drilling without slurry circulation to facilitate drilling with fewer accessories and to avoid pollution. The rig owns a high drilling efficiency due to the rotary CFA drilling system Max. extraction force 20 m (65.6 ft)) 800 mm (2 7 ) 400 kn (89923 lbf) 6000mm 19 8 drive with large output torque. Auger cleaner to reduce labor intensity. Isuzu AA-6HK1XQP intercooler diesel engine owns the functions of load-sensing and output power autoadjusting; auto accelerating/decelerating function, fuel consumption can be reduced by 5-10%. Embedded system based on work mechanism controller and perfect CAN-BUS technique to take full charge of whole machine monitoring. Hydraulic pump, motor, valve and joint are introduced in well-known brands to ensure high reliability of system; main oil circuit adopts advanced negative control technology and auxiliary oil circuit adopts load sensitive control system, which assures the optimal match of output power and load under all kinds of operating conditions. Meet the standards of city construction law due to its low noise, slight vibration and little pollution during drilling. Main winch max. line pull (1st layer) Kelly drilling system Drilling speed Main winch max. line pull (1st layer) Crowd cylinder max. push Crowd cylinder max. pull Stroke Main Winch Auxiliary Winch 150 kn.m (110633 lbf.ft) 150 kn (33721 lbf) 60 m (197 ft) 1800 mm (5 11 ) 7-26 rpm 200 kn.m (147511 lbf.ft) 200 kn (44962 lbf) 150 kn (33721 lbf) 160 kn (35969 lbf) 4300 mm (14 1 ) 72 m/min (2.7 mph) 28 mm (1.1 in) 76 kn (17085 lbf) 79 m/min (2.9 mph) 26081mm 85 7 17245mm 56 7 14233mm 46 8 700mm 2 4 3000-4000mm 9 10-13 1 1030mm 3 5 Mast Inclination Forward CFA backward Sideward 20 mm (0.8 in) 5 15 ±5 5487mm 18 6790mm 22 3 3368mm 11 1 Whole Machine System pressure 34.3 MPa (4975 psi) Pilot pressure 4 MPa (580 psi) Traction force 360 kn (80931 lbf) Transport width 3000 mm (9 10 ) Operating width Transport height Transport length 4000 mm (13 1 ) 3368 mm (11 1 ) 14233 mm (46 8 ) 19961mm 65 6 Max. Weight (with standard CFA) 60 t (66 sh.ton) Engine Isuzu Model AA-6HK1XQP Style Intake form 4-stroke water-cooled overhead valve; direct injection Turbocharger; inter cooler 1799mm 5 11 1030mm 3 5 Fuel Emission regulation light oil (JIS Type 2) EU stage II / EPA Tier 2 700mm 2 4 3000-4000mm 9 10-13 1 No. of cylinder - bore stroke 6-115 125 mm / 6-4.5 4.9 in 14233mm 46 8 Displacement Compression ratio 7.79 L / 475 in³ 17.3:1 3368mm 11 1 Rated power Max. torque 193.5 kw(259 hp)@2000 rpm 872.8 N.m (644 lbf.ft)@1700 rpm 5487mm 18 6790mm 22 3 Fuel consumption ( 100% output) 236.6 g/(kw.h) 0.390 lbs/(hp.h) 3 SANY SR150/200C/250 Rotary Drilling Rig with CFA System Quality Changes the World 4

SR250M Technical Data Multi-function: drilling with Continuous Flight Auger (max. Drilling dia. Φ800mm and max. drilling depth 25.5m) or with Kelly system (max. drilling dia. Φ2500mm, CFA drilling system max. drilling depth 76m, feed by crowd winch, and it can drill with a casing 23 m (75.4 ft) oscillator) after replacing related components. 800 mm ( 2 7 ) Dry drilling without slurry circulation to facilitate drilling with fewer accessories Max. extraction force 700 kn (157366 lbf) and to avoid pollution. 150 kn.m (110633 lbf.ft) The rig owns a high drilling efficiency due to the rotary drive with large output Kelly drilling system torque. 70 m (230 ft) Auger cleaner to reduce labor intensity. 2500 mm (8 2 ) The adoption of truss type mast enables greater bending resistance and Drilling speed 6-30 rpm compressive resistance. 260 kn.m (191764 lbf.ft) When drill with Kelly system, the rig can drill in rock within drillability<grade 8 Crowd winch max. push 300 kn (67443 lbf) and uniaxial compressive strength 100 MPa. Crowd winch rope dia. 24 mm (0.94 in) Stroke 10000 mm (32 10 ) Caterpillar C9 or Cummins QSL9-C325 intercooler diesel engine owns the functions of load-sensing and output power auto-adjusting; auto accelerating/decelerating function, fuel consumption can be reduced by 5-10%; it meets EU stage III / EPA Tier 3 emission regulation. Embedded system based on work mechanism controller and perfect CAN-BUS technique to take full charge of whole machine monitoring. Hydraulic pump, motor, valve and joint are introduced in well-known brands to ensure high reliability of system; main oil circuit adopts advanced negative control technology and auxiliary oil circuit adopts load sensitive control system, which assures the optimal match of output power and load under all kinds of operating conditions. Meet the standards of city construction law due to its low noise, slight vibration and little pollution during drilling. Main Winch 240 kn (53954 lbf) 63 m/min (2.3 mph) 28 mm (1.1 in) Auxiliary Winch 110 kn (24729 lbf) 70 m/min (2.6 mph) 20 mm (0.8 in) SR250M Mast Inclination Forward 5 CFA backward 15 Sideward ±6 Whole Machine System pressure 34.3 MPa (4975 psi) Pilot pressure 4 MPa (580 psi) Traction force 510 kn (114653 lbf) Work weight (with standard CFA) 70/74 t (68.9/72.8 long ton) SR250M SR250M 5 SANY SR150M/200M/250M/280M Rotary Drilling Rig with CFA System Quality Changes the World 6

SR280M Technical Data CFA drilling system 24 m (78.7 ft ) 800 mm ( 2 7 ) Max. extraction force 800 kn (178947lbf) 150 kn.m (110633 lbf.ft) Kelly drilling system CFA and Kelly can be respectively realized via replacement of working equipment; casing oscillator is optional. The unique truss type anti-vibration mast optimizes the 84 m (276 ft ) 2500 mm (8 2 ) Drilling speed 6-30 rpm 285 kn.m (210394 lbf.ft) Crowd winch max. push 350 kn (78683 lbf) Crowd winch rope dia. 28 mm (1.1 in) vibration absorbing ability. Stroke 10000 mm (32 10 ) The big torque rotary drive with special lubricating system Main Winch system stability by frequency resonance technology. It has more bending resistance, compressive resistance and makes sure that it can work in high-temperature 285 kn (210394 lbf) environment, which is available in three drilling modes: 63 m/min (2.3 mph) standard, low speed and big torque, or high speed and 32 mm ( 1.3 in ) small torque. Auxiliary Winch Special pulley yoke raises main winch pull notably. 110 kn (24729 lbf) The main winch has functions of touch-bottom protection 70 m/min (2.6 mph) and priority control; fast line speed is optional. 20 mm (0.8 in) Auger has the features of reliable connection, large rigidity, Mast Inclination SR280M good wearing resistance and fine sealing; the unique Forward 5 double-layer core tube design not only increases auger CFA backward 15 strength, also guarantees smooth concrete conveyance, Sideward ±6 thereby enhancing construction efficiency. Auger extension can increase hole depth on the premise of non-add auger. The hydraulic auger cleaner can clean the auger effectively to reduce labor cost. The bottom arm equipment can stabilize the long auger Whole Machine System pressure 34.3 MPa (4975 psi) Pilot pressure 4 MPa (580 psi) Traction force 510 kn (114653 lbf) Work weight (with standard CFA) 72/76 t (70.9/74.8 long ton) during operation to ensure the exact hole position and verticality. The support system in the mast end guarantees the whole machine stability during operation. The valve at the bottom of auger can prevent drilling bits entering concrete pipe during operation. When drilling pipe is taken out and concrete grout is injected, the valve will be S type 2) SR280M opened. The rotary drive multi-purpose key bushing facilitates the replacement of Kelly bar and CFA; the removable and symmetrical key structure doubles key's service life. Low vibration, low noise and low pollution to meet the high SR280M standards of city pile foundation construction. 7 SANY SR150M/200M/250M/280M Rotary Drilling Rig with CFA System Quality Changes the World 8

Chassis Hydraulic System Hydraulic drive and telescopic crawler structure improve the reliability and stability of the rig in construction. Adopting stable, reliable and high-performance hydraulic system of international brands. Chassis is the installation base to the upper structure of the rig, it is used to install and support crawler travel mechanism, and there is hydraulic cylinder inside it. The centre revolving joint of hydraulic system transfers working pressure oil of hydraulic system of upper machine to the crawler travel mechanism and crawler telescopic mechanism, and by the telescopic movement of hydraulic cylinder, the extension and retraction of crawler travel mechanism is realized. This function can make the rig broaden the distance of crawlers, which greatly improves the rig operating stability; while transporting, crawlers would be retracted to meet the requirement of highway traffic regulations. Hydraulic drive and telescopic crawler mechanism improve the reliability and stability of the rig during operation. Main oil circuit adopts advanced negative flow control technology; consequently, flow supply according to requirement is realized. Based on it, constant power and electricity power override control make the best use of the engine power. Auxiliary oil circuit adopts load sensitive control system which is welcomed by the international engineering machinery industry. The core parts as load-sensing pump and multi-way directional valve with load compensation make the output power and all kinds of operating conditions achieve optimal match, which mostly improves system transmission efficiency. The rig adopts pilot control system. Reliable pilot logic valve controls all actions of the rig. Pilot control is flexible, safe, comfortable and precise, which greatly improves the operational performance, flexibility, safety and comfort, and fully shows the integration of man-mechanics-electronics-hydraulics. Motor of rotary drive Motor + gearbox of winch Rig model SR150M SR200M SR250M/280M Chassis model SY230RC SERIES SY310RC CAT330D/336D SY420R Chassis weight 19.5 t (19.2 long ton) 30 t (29.5 long ton) 35.5 t (35 long ton) 39.8 t (39.2 long ton) Engine model QSB6.7-190 AA-6HK1XQP C9 STH/HHP QSL9-C325 Crawler length 4450 mm (14 7 ) 5487 mm (18 ) 5464 mm (17 11 ) 5911 mm (19 5 ) Track shoe width 700 mm (2 4 ) 700 mm (2 4 ) 800 mm (2 7 ) 800 mm (2 7 ) Crawler height 940 mm (3 1 ) 1030 mm (3 5 ) 1030 mm (3 5 ) 1060 mm (3 6 ) Overall width 4100 mm (13 5 ) 4000 mm (13 1 ) 4300 mm (14 1 ) 4490 mm (14 9 ) Matching the constant power of hydraulic system perfectly, the whole machine performs the maximum working efficiency. The rig Adopting international advanced super strength, large torque, directly spraying, turbocharged, intercooling power system engine. High efficient turbocharged function improves the performance and power of the engine; special compressor enables the machine to work on plateau; electric injection supplies precise spray oil volume, energy-saving and lower consumption; high efficient combustion chamber realizes high power output with low oil consumption, low discharge and low noise. Control System Based on the CAN-BUS electronic control system, the machine realizes intellectual control of engine monitoring, machine action control, virtual Instrument display, malfunction check, alarming and information display. The key parts are all world-famous brands products. Combination of electro-hydraulic control Be in charge of compound control and check/protection of the engine, hydraulic pump, hydraulic valve and the rig fully and duly. The electrical equipment checks the operating conditions, and drives the hydraulic and mechanical equipment according to the requirement of construction processing. Man-machine interactive technology The friendly interface displays the machine operating conditions real-timely, which is directly related to the operating performance of the rig, and more information would help the operator to know the operating conditions of the rig and make the correct judgment and adjustment. The choice of working state, setting of working parameters, online adjustment of input and output signals, system calibration and equipment malfunction check and inquiry are finished by pressing buttons. The system is safe and reliable with steady performance, friendly interface, convenient and intellectual operation. Automatic verticality adjusting control technology The rig automatic verticality adjusting function is developed self-reliantly. The function module is integrated inside the main control system, which greatly improves the combination of control precision, cost and the main control system of the rig. Mast automatic erecting and lying control technology The erecting/lying and lateral inclination of the mast are adjusted automatically according to the feedback of the mast angle. With unattended condition, the mast can also be lifted and adjusted automatically to verticality, and the speed and synchronism of the mast automatic erecting and lying can be changed by parameters setting. Engine pump power control technique Closed-loop control is adopted. While working, the hydraulic pump absorption power is adjusted automatically by control system according to the change of the engine power and load to achieve the optimal match of the engine power and the pump power. Graded power control technology is adopted to set the engine working ability according to the specific operating conditions, which reduces the work intensity and ensures steady operation of the engine on economical point. Fault intelligent diagnosis technology The parameters of engine, hydraulic system and control system are cycled checked by fault diagnosis device to judge whether the rig works normally or not. When a fault occurs, the rig will be shut down timely and the code of fault will be displayed to avoid more severe damage. ISUZU AA-6HK1XQP CATERPILLAR C9 STH/HHP Relay module Control module Inclinometer Pressure sensor 9 SANY SR150M/200M/250M/280M Rotary Drilling Rig with CFA System 10

Driving Mechanism Kelly Bar/CFA Including rotary drive, main / auxiliary winch, parallelogram mechanism, mast, etc. SANY Kelly bar plays the leading role in China, and is exported to Asia, Europe, America and Africa. Rotary drive stiffeners to increase its torsion and bending resistance. The Super drilling torque; power is much stronger with double motor and mast is articulated and folded in 3 sections, which is double gerabox; special hub built-in detachable key patent and convenient for transportation. SR250M/280M adopts truss pulley yoke sliding plate abrasion compensation technology are type mast to ensure greater bending resistance and adopted; rotary drive speed electrical multistage control ensures the compressive resistance. The Kelly bar and rotary drive are rig working steadily; the slew ring drives the Kelly bar to rotate by its installed on the both side tracks of the mast, which owns inner dental lamina of sleeve type spindle and realizes drill-in. The guiding function when drilling. Special mast turnplate patent alternation between Kelly system and CFA system is easily achieved technology owns joint function. Electro-mechanical interlock by installing or uninstalling the inner sleeve. spacing makes the system safe and reliable. The mast can match different Kelly bars. Large diameter drilling bucket can Parallelogram mechanism be installed with the lower mast dismounted. Mast extension The parallelogram adjusting mechanism and triangle uniform load and support cylinder are Installed at the bottom of mast to fit bracing frame ensure both accurate location of drilling tool and CFA drilling method and increase drilling depth and the stability verticality of mast; The joint between parallelogram adjusting of the rig. mechanism and mast is as upwards as possible to increase the stability of mast; adjust the working range of mast and the height of Main/auxiliary winch machine during transportation; all joints of parallelogram mechanism With world-famous motors and gearboxes, it works stably and adopt initiated new type auto-lubricating bearings. reliably; rope retainer is used to prevent rope from overlapping, slipping, squeezing and wearing; Lebus drum is adopted to Mast ensure the layered winding of wire rope to prolong the service SR150M/200M is of box type structure with gusset plates as life of the rope. Friction Kelly bar (Kelly system) Interlocking Kelly bar (Kelly system) It owns such merits as easy operating, large drilling depth Interlocking Kelly bar owns great anti-twisted ability, transfers (more tubes than interlocking Kelly bar), lifting smoothly without greater pressure to drilling tools without pressure lost, so it is suitable unlocking between inner and outer pipe. Pressure is transferred to for hard formation drilling. SANY interlocking Kelly bar adopts high drilling tools by friction force, so it is not suitable for drilling in hard strength alloy pipe, wear-resistant alloy spline, and special designed formation. To protect base machine, the shock absorbing spring of and treated pressure points, lower pipe parts, baffle ring and torque Kelly bar is designed according to different inertia force while transfer points. Key parts are under strict monitoring to ensure high releasing Kelly bar. reliability and long service life during production. Type Friction Kelly bar Outer dia. Φ377mm/Φ1 3 No. of tubes length per rod 4 12 m / 4 39 4 Nominal torque 150 kn.m/110633 lbf.ft Note SR150M Kelly CFA Φ400mm/Φ1 4 3 4.2m+1.8m/3 13 9 +5 11 150 kn.m/110633 lbf.ft SR150M CFA Friction Kelly bar 注 : 三一只对符合三一钻杆承保范围和符合三一钻杆操作规程的钻杆承保, 详见钻杆操作指南等册子 Φ440mm/Φ1 5 5 13 m / 5 42 7 200 kn.m/147511 lbf.ft SR200M Kelly CFA Φ600mm/Φ2 3 5.25m+1.495m/3 17 3 +4 11 150 kn.m/110633 lbf.ft SR200M CFA Friction Kelly bar Φ440mm/Φ1 5 5 14 m / 5 45 11 250 kn.m/184556 lbf.ft SR250M Kelly CFA Φ600mm/Φ2 3 6.3m+1.3m/3 20 8 +4 3 150 kn.m/184556 lbf.ft SR250M CFA Friction Kelly bar Φ508mm/Φ2 5 16 m / 5 52 6 280kN.m/206515 lbf.ft SR280M Kelly CFA Φ600mm/Φ2 3 6.3m+1.3m/3 20 8 +4 3 150 kn.m/184556 lbf.ft SR280M CFA Drilling Tools It includes drilling bucket, auger, core barrel, centrifugal discharge drilling tools, belling drilling tools and so on, and can drill in clay layer, sandy gravel, cobble layer and weathered strata. nflat bottom bucket for clay layer ndouble bottom bucket for rock ndouble start clay auger nflat bottom bucket for tuff ndouble bottom cleaning bucket ndouble start auger for rock nflat bottom cleaning bucket nsingle start clay auger ndouble start conical rock auger ndouble bottom soil bucket nsingle start auger for mixed-layer ndouble start auger for soft rock ndouble bottom bucket for mixed-layer nsingle start rock auger ndouble start auger for hard rock 11 SANY SR150M/200M/250M/280M Rotary Drilling Rig with CFA System 12

Working Equipment Optional Cab Manifold working equipments are supplied to meet special requirement of customers. Operate comfortably the best cab would improve productivity greatly. (SANY cab for example) Common construction methods are as follows: Kelly bar with drilling tools, casing installation with rotary drive, Continuous Flight Auger drilling, drilling with casing oscillator, etc. Construction technologies include dry drilling, slurry support drilling, whole-course-casing drilling, wall building drilling, etc. Drilling with casing oscillator (Kelly system) Greater embedding pressure can be achieved by casing oscillator instead of Casing Drive Adapter, casing can be embedded even in hard layer. Casing oscillator owns such merits as strong adaptability to geology, high quality of completed pile, low noise, no mud contamination, slight influence to former foundation, easy to control, low cost, etc. It owns advantages in following geological conditions: instable layer, underground slip layer, underground river, strata, old pile, erratic boulder, quicksand, foundation of emergency and temporary building. (see SRT150 brochure) Casing installation with rotary drive (Kelly system) This method has solved problems such as large construction for manual casing embedding, need for auxiliary equipment as excavator, potential collapse of drilling embedded hole and the holecollapse during drilling. It gains obvious advantages in drilling in backfill soil layer, shallow sand pebbles layer and karst cave limestone layer. The powerful rotary drilling rig of SANY-series is capable of installing and extracting casing without the assistance of casing oscillator. Installing casing with Casing Drive Adapter ensure verticality and avoid collapse. Drilling in and installing casing can carry out simultaneously to improve efficiency. 600/800/1000/1200/1500mm 340bar 2180kN.m 500mm 2100kN 13 SANY SR150M/200M/250M/280M Rotary Drilling Rig with CFA System 20t 2200kN 261mm 630mm 21t 4350mm 2730mm 1810mm 2 /2 7 /3 3 /3 11 /4 11 4934.7psi 1607865lbf.ft 1 8 471910lbf 18sh.ton 494382lbf 10 2 2 19sh.ton 14 3 9 4 5 5 Note: SANY Casing Oscillator is suitable for SR200C and heavier rig. Falling Object Protective Steel Part Welding Structure The cab came into shape by stamping hi-strength steel plate. Its window is made of toughed glass. It's equipped with safety belt to best protect operator's safety. Air Conditioner The imported full automatic air-conditioner of standard configuration and big capacity is capable of admitting air by adjusting and purifying the cab air circularly, and hence keeping the air fresh in the cab.it can realize quick refrigeration and temperature rise to obtain comfortable temperature in cab all the year round. Moreover, it has a powerful control panel, which is convenient in operation. Wide Visual Field The optimized cab with the same high strength reduces the area of column and effectively lessens the blind area of the visual field, therefore making operation with high safety. The front and side visual windows allow the operator see the state of work device and the surrounding environment. The rear visual window and engine casing in conformity with design height provide wide rear visual field. All-directionally Adjustable Suspended Seat with Dual-slide-rail Structure The height and location of the seat, obliquity of the backrest, height of the armrest and headrest are easily adjustable. The adjusting buttons are within the operator's reach. The rigidity of the seat is also adjustable in accordance with the weight of the operator so that the operator can operate the machine comfortably in spite of his build. High-level Sealed Cab The cab is equipped with seal ring of good sealing to prevent dust and rainwater from entering the cab and keep the cab clean. It's quiet in the cab, so the operator's fatigue can be effectively mitigated. Multi-point Tridimensional Wind Blowing With 9 air ports in the cab, the operator can enjoy the favorable performance of the air-conditioner. There is a defrosting air port on the front windshield in the cab to ensure the operator clear visual field. The air ports blowing face and back of the operator can be freely switched as required to adjust the wind direction and bring comfort. Computer Monitoring System The computer monitoring system is assembled with sound and light automatic alarm, and the content and position of malfunction can be automatically displayed. The system checks the machine timely and notifies the operator when the malfunction will happen so as to maintain timely. Convenient and Comfortable Operation It is very quiet in the cab while operating the machine. The alldirectionally adjustable seat of superior quality is very comfortable. The joystick and operation buttons are within your reach, which is labor saving and convenient. 14

Convenient Maintenance Customer Support The fittings originally imported and components of superior quality have longer maintenance cycle. The remote assembly of wearing parts is realized so that the maintenance is more convenient, thus enhancing the utilization ratio of machine and lowering the maintenance costs. All customers of SANY Rotary Drilling Rig can enjoy the commitment of overall services. neasy to maintain nlong Maintenance Cycle noil Tank It is close to the maintenance points to The spare parts of superior quality can The oil tank of large capacity can reduce ensure the service being finished quickly effectively prolong the service life, the cycle of oil filling. The oil tank adopts and timely and easy to disassemble and lessen the maintenance time and the top-grade anti-rust technology so that maintain the hydraulic system, working enhance the availability of the machine. it will not rust even if the oil containing equipments, main and auxiliary winch. nbottom Emission Screw Plug such chemical substances as water and neasy Cleaning of Radiator The radiator, fuel tank, hydraulic oil tank phosphoric acid dips inside for long time. It's accessible to the radiator of the and engine oil bottom shell are engine once opening the service door. equipped with screw plugs at the The radiator has special guard shield bottoms, which is convenient for outside to block dirt. When cleaning the discharging foreign substances and radiator, it only needs dismantle the waste liquid out in the replacement of oil guard rail for washing. or cleaning. A quick detachable baffle is neasy Replacement of Filter element installed at the bottom to prevent the For easy replacement of wearing parts, emission screw plug from damage. the fuel, engine oil, hydraulic oil and air noverhead Guard of Engine filters conduct the remote installation in The overhead guard of engine is the design process, accordingly, the equipped with a spring for convenient operator can quickly replace them even opening. After opening the overhead standing on the ground as long as the guard of engine, the engine can be service door is opened. easily maintained. Sany has established branches and 300 offices over 100 countries and regions. In china, there are 29 branches and 208 offices to ensure a service center within 150km. Service commitment After receiving the service call from customer or distributor, the service engineer will afford technical support by communicating to customer by phone or at the site. The service engineer must arrive at the site on time by appointment with customer. 24 hours waiting-on-orders system for service engineers. The service engineer shall not leave the site before successfully solving the malfunctions, and shall be permitted by the customers. In case of not solving the problem within three days, technical support and guide will be supplied from headquarter. Safety SANY Rotary drilling rig embodies the human-centric design conception on each aspect. The guard devices, added at many positions in the rig, minimize the possibility of injuries. nfan Cover The engine radiator fan are enclosed by the thin iron wire net, which lessens the overhaul danger and prevents damage of blade in case of other objects' downfall nhydraulic Pilot Lock The control handle will not work when the hydraulic pilot lock lever is at the locking position. Therefore, the possible accident in consequence of inadvertent operation will be avoided. nslip-proof Footboard and Large Armrest The specially designed footboard efficaciously prevents the backward and sideward slip of soles. The large armrest prevents the operators from tumbling when he loses his balance. nrear View Mirror and Escape Window The left and right sides of cab are equipped with rear view mirrors, through which the operator can clearly see the situation of rear of the rig without turning back. Thus, the occurrence of accidents is greatly avoided. In the cab, there is an escape window, through which the operator can make his escape in case of unexpected dangers. nsplash-proof Baffle In the middle of pump chamber and engine lays the baffle, which prevents the oil from splashing to the hot position of engine if the hydraulic system is damaged. nstrengthened Transparent Anti-ultraviolet Glass When there is intense light, the light-color glass effectually abates the entry of ultraviolet, relieves the visual fatigue of operator and enables the operator to see the working object easier. nslip-proof Plate and Pad nhigh-strength Top Guard Plate The cab top plate is made by Integration of the thick high- strength steel plate and the reinforced bar stamping. It bears excellent collision resistance and seldom gets deformed. Under the working condition of falling rubbles, the top plate will secure the operator. The optional OPG top guard plate and the front window protection net are the optimal choice for high-altitude working against falling objects. The slip-proof plate with star-shape hole covers on the top of main valve and the air cleaner. And the slip-proof pad adheres to many positions of the vehicle body. Such a layout is applied to obviate the maintainer's tumble when they are undertaking maintenance. Fan Cover Extinguisher Escape Window Splash-proof Baffle Service content Pre-sale service Technical consultations for special project. Equipment model selecting. Design products according to the customer special requirements. Train service personnel for the customer. Provide consultation for new, special and difficult project construction. Give applicable construction plan. In-sale Service Help customer for machine transportation. Advance check before acceptance. Introduce SANY service system. After-sale Service Assist the customers in working out the initial construction scheme. Install and debug the equipment. Train the operator on site Solve the malfunction on site, rapid and actively. Deliver spare parts to the customer. Special service for key projects. Provide the opportunity for technical exchange. Value-added service Top-level tracing service for VIP project. Special operating certification agent; provide operator train regularly all the year International agent training and qualifications Big-scale maintenance business Regular patrol inspection Technology update Electric circuit retrofit Offer professional maintenance periodically for customer. 15 SANY SR150M/200M/250M/280M Rotary Drilling Rig with CFA System 16