porcelain tiles of distinction
Contents Installation methods 1 Fuerte 2 Canyon 4 Livigno 6 Oxide 8 Rock 10 Gems 12 R11-R13 Slip Rating 14 Water Absorption 14 Abrasion Resistance 15 Chemical Resistance 15 Technical Specifications 16 Pool Coping and Step Tread 17 Shade variation V1 V2 V3 V4 Shade variation is inherent in all tile products, including man-made tiles such as porcelain, glass & ceramic. Shade and texture will vary significantly from piece to piece to within production runs. V1 shade variation has little or no change from piece to piece where a V4 will have a large variety of color and/or texture changes. Prior to any installation, a range of tiles should be approved by the customer. No claims for shade or texture variation will be honored after installation. Please note shades of color are seen differently on computer monitors and therefore customers should request a sample before making a final selection or purchase.
Installation methods RAISED INSTALLATION ONTO SUPPORTS Supports Drainage Material Water-Proofing Material Inclined Footing Floor DRY-SYSTEM INSTALLATION ONTO GRAVEL OR SCORIA Gravel of 10cm (Gap 7 & Cement) Soil DRY-SYSTEM SPACED INSTALLATION ONTO GRASS Gravel or Scoria of 10cm (Gap 7 & Cement) Soil TRADITIONAL ADHESIVE INSTALLATION Tile Adhesive Reinforced Concrete Pad Drainage Layer Soil CMP Porcelain Tile Catalogue - 1
Fuerte grey 60 x 60 2 - CMP Porcelain Tile Catalogue CMP Porcelain Tile Catalogue - 2
colours Fuerte white grey anthracite sizes 60 x 60 CMP Porcelain Tile Catalogue - 3
Canyon beige 60 x 60 4 - CMP Porcelain Tile Catalogue
colours Canyon beige black Anthracite sizes 60 x 60 CMP Porcelain Tile Catalogue - 5
Livigno grey 60 x 60 6 - CMP Porcelain Tile Catalogue
colours Livigno light grey grey greige dark grey size 60 x 60 CMP Porcelain Tile Catalogue - 7
Oxide natural 60 x 60 8 - CMP Porcelain Tile Catalogue
colours Oxide beige dark natural Anthracite size 60 x 60 CMP Porcelain Tile Catalogue - 9
Rock grey 60 x 60 10 - CMP Porcelain Tile Catalogue
colours Rock natural grey beige anthracite dark grey size 60 x 60 CMP Porcelain Tile Catalogue - 11
Gems amber 60 x 60 12 - CMP Porcelain Tile Catalogue
colours Gems amber diamond obsidian opal pearl sizes 60 x 60 CMP Porcelain Tile Catalogue - 13
R11-R13 Slip Rating Certificates available on request Water Absorption 14 - CMP Porcelain Tile Catalogue
Abrasion Resistance Chemical Resistance CMP Porcelain Tile Catalogue - 15
Technical specifications TEST DESCRIPTION STANDARD TEST STANDARDS CMP Porcelain SURFACE QUALITY BS EN ISO 10545-2 A minimum of 95% of tiles are to be free from visible defects A minimum of 95% of tiles are to be free from visible defects LENGTH & WIDTH BS EN ISO 10545-2 ±0.6% ±0.15% THICKNESS BS EN ISO 10545-2 ±5% ±0.3% STRAIGHTNESS OF SIDES BS EN ISO 10545-2 ±0.5% ±0.2% RECTANGULARITY BS EN ISO 10545-2 ±0.5% ±0.2% SURFACE FLATNESS: CENTER CURVATURE SURFACE FLATNESS: EDGE CURVATURE SURFACE FLATNESS: WARPAGE BS EN ISO 10545-2 ±0.5% ±0.2% BS EN ISO 10545-2 ±0.5% ±0.2% BS EN ISO 10545-2 ±0.5% ±0.2% WATER ABSORPTION BS EN ISO 10545-3 0.5% 0.2% BREAKING STRENGTH BS EN ISO 10545-4 1300 N 6500 N MODULE OF ROPTURE BS EN ISO 10545-4 35 N/mm 2 40 N/mm 2 RESISTANCE OF SURFACE BS EN ISO 10545-7 COEFFICIENT OF LINEAR EXPANSION RESISTANCE TO THE THERMAL SHOCK manufacturer to state the abrasive class PEI CLASS - 3 and above BS EN ISO 10545-8 9 Mk 6.9 Mk BS EN ISO 10545-9 test method available resistant CRAZING RESISTANCE BS EN ISO 10545-11 required resistant FROST RESISTANCE BS EN ISO 10545-12 required resistant RESISTANCE TO HOUSEHOLD CHEMICALS & SWIMMING POOL SLATS RESISTANCE TO LOW ACIDS & ALKALIS BS EN ISO 10545-13 BS EN ISO 10545-13 Minimu GB Manufacturer to state classification RESISTANCE TO STAINING BS EN ISO 10545-14 minimum class 3 Class GA no visible effect Class GLA no visible effect Class 4 minimum, Stais SLIP RESISTANCE DIN 51130 R11-R13 16 - CMP Porcelain Tile Catalogue
Arissed coping/step tread Side View 300 mm 20 mm 20 mm 40 mm Perspective View 40 mm 45 1 side chamfered edge 300 mm 45 1 side chamfered edge 45 1 side chamfered edge 600 mm 40 mm 45 1 side chamfered edge 20 mm Glued area 20 mm 2 pcs. Porcelain Fixed with glue 40 mm Bullnosed Coping/step tread Side View Perspective View 300 mm 20 mm 300 mm 600 mm 20 mm 20 mm Long Edge Bullnosed CMP Porcelain Tile Catalogue - 17
contacts Showroom & Warehouse 98 Hillside Road, Wairau Valley, Auckland Mail: PO Box 100-257, North Shore Mail Centre, Auckland 0745 Tel: 09 415 4588 Email: ssl@clear.net.nz Fax: 09 415 4566 Web: sslnz.net.nz Distributors Ltd