ZXIS-5 series SUPER LONG FRONT P P L I T I O N & T T H M E N T Model ode Engine Rated Power Operating Weight ZX70LH-5 70 kw (3 HP) 0-50 300 kg
SPEIFITIONS ZX70LH-5 TYPE 1 / TYPE 1 / TYPE 0 SUPER LONG FRONT ENGINE Model... Type... spiration... ftertreatment... Isuzu L-UZ1XZS-01 -cycle water-cooled, common rail direct injection Variable geometry turbocharged, intercooled, cooled EGR Muffler filter No. of cylinders... Rated power ISO 99, net... H/P mode: (Without Fan) 70 kw (3 HP) at 000 min-1 (rpm) EE 0/9, net... H/P mode: (Without Fan) 70 kw (3 HP) at 000 min-1 (rpm) SE J139, net... H/P mode: (Without Fan) 70 kw (3 HP) at 000 min-1 (rpm) Maximum torque... 1 35 Nm (1 kgf m) at 1 500 min-1 (rpm) Piston displacement... 9.39 L ore and stroke... 0 mm x 15 mm atteries... x V / 170 h HYDRULI SYSTEM Hydraulic Pumps Main pumps... Maximum oil flow... Pilot pump... Maximum oil flow... variable displacement axial piston pumps x 00 L/min 1 gear pump 3 L/min Hydraulic Motors Travel... axial piston motors with parking brake Swing... axial piston motors Relief Valve Settings Implement circuit... TYPE 1 : 31.9 MPa (35 kgf/cm) TYPE 1 & TYPE 0 :.9 MPa (95 kgf/cm) Swing circuit.... MPa (90 kgf/cm) Travel circuit... 35.3 MPa (30 kgf/cm) Pilot circuit... 3.9 MPa (0 kgf/cm) Power boost... 35.3 MPa (30 kgf/cm) UNDERRRIGE Tracks Track shoes with triple grousers made of induction-hardened rolled alloy. Heat-treated connecting pins with dirt seals. Hydraulic (grease) track adjusters with shock-absorbing recoil springs. Numbers of Rollers and Shoes on Each Side Upper rollers... 3 Lower rollers... 9 Track shoes... 53 Track guards... Travel Device Each track driven by axial piston motor through reduction gear for counterrotation of the tracks. Parking brake is spring-set/hydraulic released disc type. utomatic transmission system: High-Low. Travel speeds... High : 0 to 5.5 km/h Low : 0 to 3.9 km/h Maximum traction force... Gradeability... SOUND LEVEL 39 kn (33 00 kgf) 70% (35 degree) continuous Sound level in cab according to ISO 39...Lp 75 d() External sound level according to ISO 395 and EU Directive 000/1/E... Lw 7 d() SERVIE REFILL PITIES Fuel tank... 75.0 L Engine coolant... 5.0 L Engine oil... 1.0 L Swing device (each side)....5 L Travel device (each side)... 11.0 L Hydraulic system... 5.0 L Hydraulic oil tank... 3.0 L Hydraulic ylinders Quantity ore Rod dia oom 170 mm 115 mm rm 1 190 mm 130 mm TYPE 1 170 mm 0 mm ucket TYPE 1 1 15 mm 95 mm TYPE 0 5 mm 5 mm UPPERSTRUTURE Revolving Frame D-section frame for resistance to deformation. Swing Device xial piston motor with planetary reduction gear is bathed in oil. Swing parking brake is spring-set/hydraulic-released disc type. Swing speed... 9.5 min -1 (rpm) Operator's ab Independent spacious cab, 1 05 mm wide by 1 75 mm high.
WEIGHTS ND GROUND PRESSURE ZX70LH-5 TYPE 1 SUPER LONG FRONT : Equipped with. m oom,.9 m rm, and 1.15 m 3 rock bucket (SE, PS heaped). Shoe type Shoe width Operating weight Ground pressure Triple grouser 00 mm 0 kg kpa (0. kgf/cm ) 750 mm 900 kg kpa (0.7 kgf/cm ) 900 mm 9 00 kg 5 kpa (0.57 kgf/cm ) ZX70LH-5 TYPE 1 SUPER LONG FRONT : Equipped with. m oom, 7.3 m rm, and 1.15 m 3 bucket (SE, PS heaped). Shoe type Shoe width Operating weight Ground pressure Triple grouser 750 mm 50 0 kg kpa (0.9 kgf/cm ) 900 mm 50 00 kg 5 kpa (0.59 kgf/cm ) ZX70LH-5 TYPE 0 SUPER LONG FRONT : Equipped with 11.5 m oom,.5 m rm, and 0. m 3 bucket (SE, PS heaped). Shoe type Shoe width Operating weight Ground pressure Triple grouser 750 mm 5 00 kg 71 kpa (0.7 kgf/cm ) 900 mm 53 0 kg 0 kpa (0.1 kgf/cm ) Note : Depending on the jobsites conditions, 900 mm grouser shoe may not be recommended for rock, hard surface or forestry application. UKET SPEIFITIONS ND OMPTILITY apacity ISO heaped Width without side cutters Weight TYPE 1 TYPE 1 TYPE 0 0. m 3 1 10 mm 90 kg 1.15 m 3 1 mm 1 070 kg : Suitable for materials with density of 1 00 kg/m 3 or less : Not applicable 3
SPEIFITIONS ZX70LH-5 TYPE 1 SUPER LONG FRONT DIMENSIONS K L E D F M I G H J N ZX70LH-5 TYPE 1 Distance between tumblers 70 Undercarriage length 5 70 * ounterweight clearance 1 30 D Rear-end swing radius 3 70 E Overall width of upperstructure 3 0 F Overall height of cab 3 330 **G Min. ground clearance 737 H Track gauge : Extended / Retracted 90 / 390 I Track shoe width G 00 G 750 G 900 J Undercarriage width Extended 3 90 3 0 3 790 Retracted 990 3 10 3 90 K Overall width 3 770 3 0 3 0 L Overall length 13 190 M Overall height of boom 570 N Track height with triple grouser shoes 1 0 * : Excluding track shoe lug ** : Triple grouser shoe Unit: mm
WORKING RNGES 1 E D 0 Ground Line ' 1 1 1 0 Unit: mm ZX70LH-5 TYPE 1 Max. digging reach 1 5 Max. digging reach (on ground) 1 330 Max. digging depth 30 Max. cutting height 0 D Max. dumping height 9 0 E Min. swing radius 5 70 ucket digging force ISO 3 kn ( 300 kgf) rm crowd force ISO 177 kn (1 000 kgf) Excluding track shoe lug 5
SPEIFITIONS ZX70LH-5 TYPE 1 SUPER LONG FRONT DIMENSIONS L K E D M F I G H J N ZX70LH-5 TYPE 1 Distance between tumblers 70 Undercarriage length 5 70 * ounterweight clearance 1 30 D Rear-end swing radius 3 70 E Overall width of upperstructure 3 0 F Overall height of cab 3 330 **G Min. ground clearance 737 H Track gauge : Extended / Retracted 90 / 390 I Track shoe width G 750 G 900 J Undercarriage width Extended 3 0 3 790 Retracted 3 10 3 90 K Overall width 3 0 3 0 L Overall length 030 M Overall height of boom 7 130 N Track height with triple grouser shoes 1 0 * : Excluding track shoe lug ** : Triple grouser shoe Unit: mm
WORKING RNGES 1 E D 0 Ground Line ' 1 0 1 1 1 0 Unit: mm ZX70LH-5 TYPE 1 Max. digging reach 1 50 Max. digging reach (on ground) 1 90 Max. digging depth 00 Max. cutting height 70 D Max. dumping height 9 70 E Min. swing radius 000 ucket digging force ISO 19 kn (19 00 kgf) rm crowd force ISO kn ( 00 kgf) Excluding track shoe lug 7
SPEIFITIONS ZX70LH-5 TYPE 0 SUPER LONG FRONT DIMENSIONS K L E D F M I H J G N ZX70LH-5 TYPE 0 Distance between tumblers 70 Undercarriage length 5 70 * ounterweight clearance 1 30 D Rear-end swing radius 3 70 E Overall width of upperstructure 3 0 F Overall height of cab 3 330 **G Min. ground clearance 737 H Track gauge : Extended / Retracted 90 / 390 I Track shoe width G 750 G 900 J Undercarriage width Extended 3 0 3 790 Retracted 3 10 3 90 K Overall width 3 0 3 0 L Overall length 1 0 M Overall height of boom 3 50 N Track height with triple grouser shoes 1 0 * : Excluding track shoe lug ** : Triple grouser shoe Unit: mm
WORKING RNGES 1 1 E 1 D 0 Ground Line ' 1 0 1 1 1 0 Unit: mm ZX70LH-5 TYPE 0 Max. digging reach 0 30 Max. digging reach (on ground) 0 00 Max. digging depth 70 Max. cutting height 17 7 D Max. dumping height 1 90 E Min. swing radius 5 700 ucket digging force ISO 1 kn (1 700 kgf) rm crowd force ISO 5 kn ( 700 kgf) Excluding track shoe lug 9
TRNSPORTTION ZX70LH-5 TYPE 1 / TYPE 1 / TYPE 0 SUPER LONG FRONT SI MHINE (WITHOUT OUNTERWEIGHT) Shoe width Overall width* 1 Weight * 00 mm 990 mm 9 00 kg 750 mm 3 10 mm 30 00 kg 5 90 mm 3 70 mm 3 00 mm 900 mm 3 90 mm 30 900 kg * 1 Undercarriage retracted * Without exhaust funnel SI MHINE FITTED WITH OOM ND NO SIDEWLK oom length Shoe width Overall width* 1 Weight * 00 mm 990 mm 3 00 kg. m 750 mm 3 10 mm 35 00 kg 900 mm 3 90 mm 35 900 kg 00 mm 3 000 mm 35 000 kg 11 190 mm 3 70 mm 3 00 mm 11.5 m 750 mm 3 10 mm 35 00 kg 1 50 mm 900 mm 3 90 mm 3 500 kg * 1 Undercarriage retracted * Without exhaust funnel SI MHINE WITH FRONT ND SIDEWLK oom length rm length Shoe width Overall width* Weight 00 mm 990 mm 0 kg. m.9 m 750 mm 3 10 mm 900 kg 900 mm 3 90 mm 9 00 kg 13 190 mm 570 mm 7.3 m 750 mm 3 10 mm 50 0 kg 900 mm 3 90 mm 50 00 kg 030 mm 7 130 mm 11.5 m.5 m * Undercarriage retracted 750 mm 3 10 mm 5 00 kg 900 mm 3 90 mm 53 0 kg 1 0 mm 3 50 mm OOM oom Overall width Weight. m 1 0 mm 90 kg 5 mm 1 930 mm 11.5 m 1 0 mm 5 550 kg 1 170 mm 1 00 mm
RM rm ucket SE heaped Overall width Weight.9 m 1.15 m 3 7 70 mm 1 170 mm 130 mm 3 70 kg 7.3 m 1.15 m 3 10 mm 1 10 mm 1 30 mm 300 kg.5 m 0.0 m 3 11 70 mm 1 30 mm 1 150 mm 150 kg UKET ISO heaped ucket EE heaped Overall width Weight 1.15 m 3 1.00 m 3 1 00 mm 1 350 mm 1 mm 1 070 kg 0.0 m 3 0.70 m 3 1 0 mm 1 0 mm 1 10 mm 90 kg OUNTERWEIGHT LEFT FRONT SIDEWLK kg LEFT RER SIDEWLK 30 kg 950 mm 750 mm 30 mm 515 mm 1 700 mm 515 mm Overall height Type 1 and Type 1 : 1 30 mm Type 0 : 1 0 mm Overall height: 150 mm Overall height: 150 mm Weight Type 1 Type 1 Type 0 9 00 kg 9 70 kg 11 50 kg 11
LIFTING PITIES (Without bucket) Notes: 1. Ratings are based on ISO 57.. Lifting capacity does not exceed 75% of tipping load with the machine on firm, level ground or 7% full hydraulic capacity. 3. The load point is the center-line of the bucket pivot mounting pin on the arm.. *Indicates load limited by hydraulic capacity. 5. 0 m = Ground. For lifting capacities, subtract bucket and quick hitch weight from lifting capacities without bucket. : Load radius : Load point height : Lifting capacity ZX70LH-5 TYPE 1 SUPER LONG FRONT Rating over-front Rating over-side or 30 degrees Unit: kg onditions oom. m rm.9 m ounterweight 9 00 kg Shoe 00 mm Load point height m Load radius.0 m.0 m.0 m.0 m.0 m.0 m t max. reach.0 *7 00 7 300 *5 700 *5 700 11.5.0 * 300 7 0 * 900 5 00 *5 00 900.3.0 *13 500 *13 500 * 00 9 500 *9 0 00 7 900 5 000 *5 700 500.7.0 *1 00 13 0 * 0 00 *9 900 00 7 700 00 * 000 300. 0 (Ground) *1 00 00 *13 300 300 9 00 0 7 00 700 * 500 300..0 * 00 * 00 *11 500 *11 500 *1 900 11 00 13 300 7 900 9 00 5 900 7 500 00 7 00 500.1.0 * 000 * 000 *17 00 *17 00 *1 00 11 00 13 00 7 900 9 00 5 900 000 5 0 11..0 *1 300 *1 300 * 300 * 300 *1 0 000 * 0 000 *9 000 00 9..0 *15 900 *15 900 *11 700 *11 700 * 500 9 00 7. onditions oom. m rm.9 m onuterweight 9 00 kg Shoe 900 mm Load point height m Load radius.0 m.0 m.0 m.0 m.0 m.0 m t max. reach.0 *7 00 7 500 *5 700 *5 700 11.5.0 * 300 7 300 * 900 5 300 *5 00 5 0.3.0 *13 500 *13 500 * 00 9 00 *9 0 7 000 00 5 00 *5 700 700.7.0 *1 00 13 00 * 0 9 0 *9 900 00 000 5 000 * 000 500. 0 (Ground) *1 00 500 *13 300 500 00 300 7 00 00 * 500 500..0 * 00 * 00 *11 500 *11 500 *1 900 00 13 700 00 000 0 7 00 00 *7 00 700.1.0 * 000 * 000 *17 00 *17 00 *1 00 0 *13 00 0 9 900 0 300 5 300 11..0 *1 300 *1 300 * 300 * 300 *1 0 00 * 0 300 *9 000 00 9..0 *15 900 *15 900 *11 700 *11 700 * 500 9 00 7.
ZX70LH-5 TYPE 1 SUPER LONG FRONT Rating over-front Rating over-side or 30 degrees Unit: kg onditions oom. m rm 7.3 m onuterweight 9 70 kg Shoe 750 mm Load point height m Load radius.0 m.0 m.0 m.0 m 1.0 m t max. reach.0 * 00 * 00 13..0 * 700 * 700 *3 00 *3 00 * 00 * 00 1.5.0 *5 0 *5 0 * 500 000 * 900 * 900 1..0 *7 00 *7 00 * 300 * 300 *5 00 5 0 *5 0 3 00 *3 000 *3 000 1.9 0 (Ground) * 300 * 300 *9 000 900 *7 00 00 * 0 00 *5 300 3 700 *3 00 *3 00 1..0 *13 900 300 * 000 00 *7 00 000 * 00 500 * 00 3 500 *3 00 3 00 1.3.0 *1 500 11 00 * 500 7 00 * 0 5 700 * 00 00 * 00 3 700 13.5.0 *1 00 11 700 * 300 7 700 * 000 5 700 * 00 00 *5 00 00..0 * 700 11 900 *9 300 7 900 * 900 5 00 *5 900 5 00..0 *9 500 *9 500 * 00 * 00 *5 900 *5 900. onditions oom. m rm 7.3 m onuterweight 9 70 kg Shoe 900 mm Load point height m Load radius.0 m.0 m.0 m.0 m 1.0 m t max. reach.0 * 00 * 00 13..0 * 700 * 700 *3 00 *3 00 * 00 * 00 1.5.0 *5 0 *5 0 * 500 0 * 900 * 900 1..0 *7 00 *7 00 * 300 * 300 *5 00 5 00 *5 0 3 900 *3 000 *3 000 1.9 0 (Ground) * 300 * 300 *9 000 *9 000 *7 00 500 * 0 900 *5 300 3 700 *3 00 *3 00 1..0 *13 900 500 * 000 00 *7 00 0 * 00 00 * 00 3 00 *3 00 3 500 1.3.0 *1 500 000 * 500 000 * 0 5 00 * 00 500 * 00 3 00 13.5.0 *1 00 11 900 * 300 7 900 * 000 5 00 * 00 500 *5 00 300..0 * 700 0 *9 300 000 * 900 5 900 *5 900 5 00..0 *9 500 *9 500 * 00 * 00 *5 900 *5 900. 13
LIFTING PITIES (Without bucket) Notes: 1. Ratings are based on ISO 57.. Lifting capacity does not exceed 75% of tipping load with the machine on firm, level ground or 7% full hydraulic capacity. 3. The load point is the center-line of the bucket pivot mounting pin on the arm.. *Indicates load limited by hydraulic capacity. 5. 0 m = Ground. For lifting capacities, subtract bucket and quick hitch weight from lifting capacities without bucket. : Load radius : Load point height : Lifting capacity ZX70LH-5 TYPE 0 SUPER LONG FRONT Rating over-front Rating over-side or 30 degrees Unit: kg onditions oom 11.5 m rm.5 m onuterweight 11 50 kg Shoe 750 mm Load point height m Load radius.0 m.0 m 1.0 m 1.0 m 1.0 m t max. reach 1.0 *3 000 *3 000 * 300 * 300 1.7.0 *3 300 *3 300 * 00 * 00 * 00 * 00 1.1.0 *3 300 *3 300 *3 0 *3 0 * 00 * 00 17.1.0 *3 900 *3 900 *3 00 *3 00 *3 0 *3 0 * 00 * 00 17.9.0 * 900 * 900 * 0 * 0 *3 00 *3 00 *3 00 *3 00 * 900 500 * 00 * 00 1..0 *5 300 *5 300 * 00 * 00 *3 700 *3 700 *3 300 3 0 * 900 00 * 300 0 1.7.0 *5 700 *5 700 * 00 * 00 *3 900 3 00 *3 00 900 * 900 300 * 500 000 1. 0 (Ground) * 000 5 00 * 00 00 * 000 3 500 *3 00 700 * 900 0 * 700 000 1.7.0 * 00 5 300 * 900 0 * 0 3 00 *3 00 500 * 00 000 * 700 000 1.3.0 * 0 900 * 900 3 00 * 000 3 000 *3 300 00 * 700 000 17.7.0 *5 00 00 * 700 3 700 *3 00 3 000 *3 0 00 * 700 00 1.9.0 *5 300 00 * 300 3 700 *3 00 3 000 * 00 * 500 15.7.0 * 00 * 00 *3 500 *3 500 * 00 * 00 * 00 * 00 1. onditions oom 11.5 m rm.5 m onuterweight 11 50 kg Shoe 900 mm Load point height m Load radius.0 m.0 m 1.0 m 1.0 m 1.0 m t max. reach 1.0 *3 000 *3 000 * 300 * 300 1.7.0 *3 300 *3 300 * 00 * 00 * 00 * 00 1.1.0 *3 300 *3 300 *3 0 *3 0 * 00 * 00 17.1.0 *3 900 *3 900 *3 00 *3 00 *3 0 *3 0 * 00 * 00 17.9.0 * 900 * 900 * 0 * 0 *3 00 *3 00 *3 00 *3 00 * 900 00 * 00 * 00 1..0 *5 300 *5 300 * 00 * 00 *3 700 *3 700 *3 300 3 00 * 900 500 * 300 00 1.7.0 *5 700 *5 700 * 00 * 00 *3 900 3 00 *3 00 3 000 * 900 300 * 500 0 1. 0 (Ground) * 000 5 900 * 00 500 * 000 3 500 *3 00 00 * 900 00 * 700 000 1.7.0 * 00 5 00 * 900 00 * 0 3 300 *3 00 00 * 00 0 * 700 000 1.3.0 * 0 5 0 * 900 3 900 * 000 3 0 *3 300 500 * 700 0 17.7.0 *5 00 900 * 700 3 00 *3 00 3 000 *3 0 500 * 700 300 1.9.0 *5 300 5 000 * 300 3 00 *3 00 3 0 * 00 * 00 15.7.0 * 00 * 00 *3 500 *3 500 * 00 * 00 * 00 * 00 1. 1
EQUIPMENT ZX70LH-5 TYPE 1 / TYPE 1 / TYPE 0 SUPER LONG FRONT... Standard equipment... Optional equipment ENGINE uto idle system artridge-type engine oil filter Dry-type air double filter with evacuator valve (with air filter restriction switch for monitor) Fan guard Fuel main filter Fuel pre-filter Isolation-mounted engine Power mode control [H/P (High Power) PWR (Power) EO (Economy) ] Pre-cleaner Radiator, oil cooler and intercooler with dust protective net Radiator reserve tank 50 alternator HYDRULI SYSTEM ccessories for breaker ccessories for breaker & crusher ccessories for speed selector uto power lift oom mode selector system ontrol valve with main relief valve Drain filter Engine speed sensing system E-P control system Extra port for control valve Full-flow filter Hose rupture valve Pilot filter Power boost Quick warm-up system for pilot circuit Shockless valve in pilot circuit Suction filter Work mode selector dditional fuse box djustable armrests ll-weather sound suppressed steel cab M-FM radio shtray uto control air conditioner uto-idle selector UX. terminal and storage ab : ROPS for excavators compliant cab (TYPE 1) OPG top guard Level I (ISO ) compliant cab (TYPE 1 & TYPE 0) Laminated round glass (green color) front window Front window on upper, lower and left side can be opened OPG top guard fitted Level ll (ISO) OPG front guard fitted Level ll (ISO) Drink holder Engine shut-off switch Electric double horn Evacuation hammer Floor mat Footrest Front window washer Glove compartment Hot & cool box Intermittent windshield wiper LED room light with door courtesy Pilot control shut-off lever Rain guard for cab Retractable seat belt Rubber radio antenna Seat: djustable reclining air suspension with heater Short wrist control levers Storage box Sun visor (front) Sun visor (side) Transparent roof with slide curtain speaker MONITOR SYSTEM larm buzzers: overheat, engine oil pressure, overload larms: overheat, engine warning, engine oil pressure, alternator, minimum fuel level, air filter restriction, work mode, overload, etc Display of s: water temperature, hour, fuel rate, clock Other displays: work mode, auto-idle, glow, rearview monitor, operating conditions etc LIGHTS cab lights cab lights working lights dditional working lights (boom right side) UPPER STRUTURE Electric fuel refilling pump with auto stop Electrical grease pump with hosereel Fuel level float Hydraulic oil level gauge Ladder Rear view camera Rear view mirror (right & left side) Sidewalk (cab side) Swing parking brake Tool box Utility space 170 h batteries.5 mm thickness undercover UNDERRRIGE olt-on sprocket Full track guard Hydraulic track adjuster Idler track adjuster Reinforced track links with pin seals Shoes : TYPE 1 00 mm triple grouser shoes 750 mm triple grouser shoes 900 mm triple grouser shoes TYPE 1 750 mm triple grouser shoes 900 mm triple grouser shoes TYPE 0 750 mm triple grouser shoes 900 mm triple grouser shoes Travel motor covers Travel parking brake Track undercover Upper and lower rollers track guard (each side) FRONT TTHMENTS entralized lubrication system Damage prevention plate and square bars Dirt seal on all bucket pins Flanged pin Monolithically cast bucket link MISELLNEOUS nti-slip steps and handrails Global e-service Lockable fuel refilling cap Lockable machine covers Onboard information controller Standard tool kit Theft deterrent system* Travel direction mark on track frame * Hitachi onstruction Machinnery cannot be held liable for theft, any system will just minimize the risk of theft. fluid-filled elastic mounts V power outlet V cigarette lighter Standard and optional equipment may vary by country, so please consult your Hitachi dealer for details. 15
uilt on the foundation of superb technological capabilities, Hitachi onstruction Machinery is committed to providing leading-edge solutions and services to contribute as a reliable partner to the business of customers worldwide. Hitachi Environmental Vision 05 The Hitachi Group released the Environmental Vision 05 to curb annual carbon dioxide emissions. The Group is committed to global production while reducing environmental impact in life cycles of all products, and realizing a sustainable society by tackling three goals prevention of global warming, recycling of resources, and enhancement of ecosystem. Reducing Environmental Impact by New ZXIS Hitachi makes a green way to cut carbon emissions for global warming prevention according to L*. New ZXIS utilizes lots of technological advances, including the new EO mode, and Isochronous ontrol. Hitachi has long been committed to recycling of components, such as aluminum parts in radiators and oil cooler. Resin parts are marked for recycling. *Life ycle ssessment ISO 100 Prior to operating this machine, including communication system, in a country other than a country of its intended use, it may be necessary to make modifications to it so that it complies with the local regulatory standards (including safety standards) and legal requirements of that particular country. Please do not export or operate this machine outside the country of its intended use until such compliance has been confirmed. Please contact your Hitachi dealer in case of questions about compliance. These specifications are subject to change without notice. Illustrations and photos show the standard models, and may or may not include optional equipment, accessories, customer installed and modified parts, optional parts and all standard equipment with some differences in color and features. efore use, read and understand the Operator s Manual for proper operation. Hitachi onstruction Machinery www.hcme.com K-EN0EU Printed in Europe