Our Mission el-tron Precision was founded in order to serve the needs of automated equipment manufacturers for innovative, high quality and reasonably priced anti-friction linear bearings. Our ompany The originator of the sub miniature ball bearing slide assembly; el-tron Precision Inc. began operations in 197 supplying original equipment manufacturers with the world's first commercially available sub miniature ball slide, model -1. Since then, thousands of el-tron slides have been incorporated into automated equipment throughout the world. Manufacturers of medical analyzing and testing machines, semiconductor and electronic chip processing equipment, printers, plotters, peripherals, assembly systems, lasers and many more have found that el-tron slides provide a cost effective anti-friction interface between moving parts in today's increasingly automated equipment. el-tron's modern corporate campus, home to world headquarters, and its principal manufacturing facility, located in the foothills of the erkshires in Western onnecticut, boasts highly automated computer controlled manufacturing and assembly operations. Highly skilled workers monitor each manufacturing step, ensuring that consistent and repeatable high quality bearings conform to the published specifications or the customer's particular requirements where applicable. Since its inception, el-tron has performed final inspection of 1% of its products. el-tron's operations staff works to assure just in time deliveries, if needed, and maintains adequate stock levels of all products at authorized distributor locations in major markets across the U.S.. and anada. MHK serves as el-tron's European distribution hub in mberg, Germany. The firm also has locations in Japan and throughout Southeast sia stand ready to serve the needs of both local and indigenous industries and those of multinational assembly and manufacturing operations worldwide. Our Quality Policy We are dedicated to providing our customers with a product of consistent quality that conforms to our specifications and meets or exceeds customer expectations while making on-time delivery at a competitive price.
INEX Selection Guide...........................................P all Slide ssemblies.......................................p 7 nti-reep all Slide ssemblies..........................p 1 Non-Magnetic all Slide ssemblies..........................p 13 rossed Roller Slide ssemblies...........................p 16 Precision Series (all & rossed Roller Slides)...............P 19 High Precision Series (all & rossed Roller Slides).............P Mini Posi-rive Stages....................................P 7 Posi-rive Stages........................................P 3 Friction Free ir ctuators..................................p all Slide Positioning Stages (Micrometer riven)...............p rossed Roller Positioning Stages (Micrometer riven)...........p 5 all & rossed Roller Positioning Stages (Side rive Micrometer)..P 56 Low Profile rossed Roller Slide Tables.......................P 6 rossed Roller Rail Sets....................................P 65 nti-reep rossed Roller Rail Sets..........................P 69 rossed Roller Slide Tables (luminum).......................p 7 nti-reep rossed Roller Slide Tables (luminum)..............p 75 rossed Roller Slide Tables (Steel)...........................P Recirculating all Slide Guides..............................P Technical Section.........................................P 9 3
Selection Guide pg 7 pg 1 LL SLIES SERIES LO TRVEL LENGTH URY PITY, L. MINI -1.5.3-1.5.5-1.5²/² -S3 (51 MOELS) -5.5-1 1.6-15..5²/² NTI-REEP LL SLIE EMLIES SERIES LO TRVEL LENGTH URY PITY, L. --S3- -5.5-1. -15..5²/² N-MGNETI LL SLIES pg 13 pg 16 pg 19 pg 1 pg pg 5 SERIES LO TRVEL LENGTH URY PITY, L. -NMS-S3-NMS 1.-61.5.5-1. -15..5²/² ROE ROLLER SLIES SERIES LO TRVEL LENGTH URY PITY, L. MINI R -9.5-. 1.6-3.6.1²/² RE-RS3-779.5-1. 1.6-15..1²/² (7 MOELS) PREISION LL SLIE SERIES SERIES LO TRVEL LENGTH URY PITY, L. M--S5-7 1-17 1.-7..56-9..1²/² (17 MOELS) PREISION ROE ROLLER SLIE SERIES SERIES LO TRVEL LENGTH URY PITY, L. RS-RS5-6 1.-7..-9..1²/² (1 MOELS) HIGH PREISION SERIES LL SLIES (LOW PROFILE & FLNGE SE) SERIES LO TRVEL LENGTH URY PITY, L. HPM-HPS5-5.5-1. -15..²/² ( MOELS) HIGH PREISION SERIES ROE ROLLER SLIES (LOW PROFILE & FLNGE SE) SERIES LO TRVEL LENGTH URY PITY, L. HPRS-HPRS5 9-5 1.-1..-15..²/² (3 MOELS)
Selection Guide MINI POSI-RIVE & POSI-RIVE STGES SERIES LO TRVEL LENGTH URY PITY, L. LS1-1-15-LS3-1-1-9 1.-1..-1.63.1²/² (36 MOELS) LRS1-1-15-LRS3-1-1 15-1 1.-1..-1.63.1²/² (36 MOELS) pg 7 Friction Free ir ctuator SERIES LO TRVEL LENGTH URY PITY, L. PNRE 1-3 7-9.5-3.19-7.677.1 ²/² pg LL SLIE POSITIONING STGES (MIROMETER RIVEN) INLUING SIE RIVE ONFIGURTION vailable with inch or metric micrometers, in X, XY, and XYZ configurations. SERIES LO PITY, TRVEL WORK URY L. X, XY, Z SURFE 99X 5,5,1.5.5 X.5²/² pg 11-3 -6, -6, 1.5-.5-. 1.5 x 1.5 to.5²/² (5 MOELS, with micrometers) 5.1 x 5.1 11P-36-P -6, -6.5-. 1.5 x 1.5 to.5²/² (11 MOELS, X and XY ONLY, no micrometers) 5.1 x 5.1 pg 56 ROE ROLLER POSITIONING STGES (MIROMETER RIVEN) INLUING SIE RIVE ONFIGURTION vailable with inch or metric micrometers, in X, XY, and XYZ configurations. SERIES LO PITY, TRVEL WORK URY L. X, XY, Z SURFE R99,, 1.5.5 x.1²/² pg 5 R11-R3 3-16, 3-16, 1.5-.5-. 1.5 x 1.5 to.1²/² (5 MOELS, with micrometers) 5.1 x 5.1 R11P-R36P 3-16, 3-16.5-. 1.5 x 1.5 to.1²/² (11 MOELS, X and XY ONLY, no micrometers) 5.1 x 5.1 pg 56 5
Selection Guide LOW PROFILE ROE ROLLER TLES SERIES LO TRVEL LENGTH URY PITY, L. pg 6 LPT-15-35 5-5.73-5.11.9-.7.1²/² (1 MOELS) Stainless steel available. ROE ROLLER RIL SETS SERIES LO TRVEL LENGTH URY PITY, L. pg 65 MINI N1-1.73-1.969.7-3.15.²/² N-N6 66-16.79-11.61 1.11-15.7.²/²to (9 MOELS).²/² Stainless steel available. NTI-REEP ROE ROLLER RIL SETS SERIES LO TRVEL LENGTH URY PITY, L. pg 69 N- / N6-66-16.79-11.61 1.11-15.7..²/² to.²/² (3 MOELS) ROE ROLLER SLIE TLES (LUMINUM) SERIES LO TRVEL LENGTH URY PITY, L. pg 7 MINI NT-1 95-197 1.-3. 1.969-.91.1²/² NT--NT-6 66-3.71-9. 1.37-1.17.1²/² (7 MOELS) Stainless steel available. NTI-REEP ROE ROLLER SLIE TLES (LUMINUM) pg 75 pg SERIES LO TRVEL LENGTH URY PITY, L. MINI NT1-96-19.9-1.969-.91.1²/² NT- / NT6-66-3.71-9. 1.37-1.17.1²/² (31 MOELS) ROE ROLLER SLIE TLES (STEEL) SERIES LO TRVEL LENGTH URY PITY, L. MINI NT-1 6-.7-1.969.9-3.36.² NT--NT-6-6.79-9.55 1.37-1..² to (1 MOELS).16² LL SLIE GUIES 6 pg SERIES LO TRVEL LENGTH URY PITY, L. SGS5-SG5 96-5.1-3. 1.5-35..² SGS9W-SG16W 551-157.-. 3.-6..5² Stainless steel available.
all Slides 6 Reasons to choose el-tron all Slides el-tron all Slides Load Ratings and Life Estimates The rated load capacity of el-tron ball slides may be a mass load on a horizontal slide,or a force load normal to the mounting surface in any position. The rated load must be centered and distributed over the slide, and the base must be fully supported on a flat mounting surface so that the ball slide does not act as a beam subject to concentrated or distributed bending forces. Loads supported by protruding arms reduce accuracy and load capacity by acting as levers or ratio arms, and should be avoided even when load forces are small. When used at the rated load capacity and moderate speeds, a life of 1 million inches of travel can be expected.the expected life at one half the rated load is 1 million inches. 1. Factory preload adjustment prevents sideplay and backlash.. Lightweight aluminum carriage and base with high load capacity. 3. uilt-in holes simplify installation and component mounting.. Steel shafts, ground over the entire length, reduce coefficient of friction to.3. 5. Long life, self cleaning ball bearing needs no lubrication. 6. Mounting surfaces, parallel to the line of motion, provide straight line accuracy to.5²/²of travel. Friction and Lubrication The coefficient of friction is lower for linear ball bearings than for rotary bearings, where the peripheral track is shorter on the inner race than on the outer race, causing the ball to skid on one or the other. The balls run exactly equal distances on the pair of tracks in linear bearings, permitting the ball to run without friction, wear, or skidding at any preload.the typical coefficient of friction for el-tron ball slides is.3. Lubrication is recommended for speeds above 1 inches/min, and is advisable at lower speeds where high loads are applied in continuous duty applications. Mounting and ccuracy The mounting surfaces of the ball slide are machined flat and smooth, and parallel to each other and the line of motion. They must be mounted on smooth, flat supports that will not deflect under load. Especially with long slides of small cross section, binding may be caused by distortion of the bottom member when mounted on irregular surfaces. If so, round shims or spacers may be placed over the mounting screws to raise the slide above the surface asperities. edding in epoxy resin is also recommended. The specified accuracy for all standard el-tron ball slides is.5inch/inch of travel. This is measured by comparison of the line of travel to a master straight edge, using a gage or indicator mounted on the slide. 7
all Slide ssemblies *Travel is 1/ distance from center in either direction. MOEL -.5-1 - -3 TRVEL*.33.5 LO PITY L 1.5 1.5 1.5 WEIGHT OZ..1.15.5 LENGTH.5 1.5 1 HEIGHT.3.3.3.3 WITH.3.3.3.3 moment load ratings + load / life formulas. pg.91 RRIGE HOLE SPING E 1.156.156.156.156 HEIGHT F.135.135.135.135 SE IMENSIONS WITH G.156.156.156.156 HOLE SPING H 1-1 - -3 - -5-6.5. 3.. 5. 1 1 16 1..5. 1.1 1. 1.5 1.6.6 3.6.6 5.6 6.6.3.3.3.3.3.3.56.56.56.56.56.56 1 3 5.1.1.1.1.1.1.17.17.17.17.17.17 1 3 3.5.5 E-1 E- E-3 E- E-5 E-6.5. 3.. 5. 1 1 1 16 1..9 1.3 1.7.1.5 1.6.6 3.6.6 5.6 6.6.1.1.1.1.1.1 1 3 5 1 3 3.5.5 M-1 M- M-.5 M-3 M-.5. 3. 1 1 13 15 1 1. 1.7 1.9. 5. 1.56.56 3.6 3.56.56.5.5.5.5.5 1 3.37.37.37.37.37.5.5.5.5.5 1 3 SERIES RRIGE HOLES (I) SE HOLE d SE HOLE 1 SE HOLE h OUNTER ORE SREW SIZE -56 UN- THRE -56 UN - - N/ -56 UN- THRE.11.1.1 # E - UN- THRE.15.19.15 # M 6-3 UN- THRE.15.19.15 # N 6-3 UN- THRE.157..15 #6 S1 6-3 UN- THRE.157..15 #6 S 6-3 UN- THRE.157..15 #6 S3 1-3 UNF- THRE..3.5 #1
SPEIFITIONS: MOEL S3-6 S3-9 S3-1 # OF HOLES ** 6 ** ** 1 Straight Line ccuracy.5²/inch of travel Positional Repeatability.² Finish lear anodize carriage and black anodize base. Other finishes on request. oefficient of Friction.3 typical onstruction luminum carriage and base, hardened steel shafts and balls, mild steel end caps. For all metric slides please call for our metric catalog. *Travel is 1/ distance from center in either direction. MOEL TRVEL* LO PITY L WEIGHT OZ LENGTH HEIGHT moment load ratings + load / life formulas. pg 91 WITH RRIGE HOLE SPING E HEIGHT F SE IMENSIONS WITH G HOLE SPING H N-1 N- N-3 N- N-6 N- N-1. 3.. 6.. 15 1 5 35 1.3.3 3. 5. 6. 7.. 1.56.56 3.56.56 6.. 1..53.53.53.53.53.53.53 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1 3. 5.5 7.5 9.5.37.37.37.37.37.37.37.31.31.31.31.31.31.31.5.5.5.5.5.5.5 1.15.15 3.15 3. 5. 7. S1-1 S1- S1-3 S1-3.5 S1- S1-6 S1-. 3. 3.5. 6.. 15 5 35 5 55.9.3 6. 6.7. 9. 11.5. 3.. 5. 6.. 1..6.6.6.6.6.6.6 1 3 5 7 9........5 3.5 3.5. 5. 7. S-1 S-1.5 S- S-3 S- S-6 S-. 3.. 6.. 5 6 75 9. 6. 6.5. 11. 15.7 19.5. 3.5. 6.. 1. 1 1 1 1 1 1 1 1.15 3 5.5 7.5 9.5....... 1 3.5. 5. 7. S3-1 S3-1.5 S3- S3-3 S3- S3-5 S3-6 S3-9 S3-1. 3.. 5. 6. 9. 1. 35 6 11 135 15 15 5 1. 1. 15.. 7. 31. 35. 6.5 5..6.6. 5. 6.. 9. 1. 15..6.6.6.6.6.6.6.6.6.15 1 3.. 5. 7. **3. **3. **3. 1 1 1 1 1 1 1 1 1.15 1 3 5 7 7. 1. 13. 9
nti-reep Linear Slides 6 Reasons to choose el-tron nti-reep Ô all Slides 1. Ideal for vertical applications. Increased life with overhanging loads 3. Positive internal stops. Low friction, straight line design 5. Factory preload controls side play and backlash 6..5²/inch straight line accuracy el-tron nti-reep Ô Slides In certain applications, uneven loads, improper preload, vertical mounting, or offset forces may cause the ball retainers to become misaligned relative to each other. The misalignment ( creep ) can ultimately cause a reduction in overall travel, the need for increased force to achieve full travel and even failure of the assembly. el-tron s nti-reep Ô retainer design prevents these problems. The single piece retainer and integral positive end stops prevent ball retainer misalignment and help keep the rolling elements centered in the assembly. The retainer is molded of engineering plastic and slotted in the center. owel pins mounted in the base and carriage limit the travel of the retainer and help to keep it centered in the slide for full travel and extended life. In applications in which retainer misalignment is a concern, el- Tron nti-reep Ô slides demonstrate greatly increased life and improved performance. nti-reep Ô slides have been extensively tested in el-tron s internal testing facility and successfully used in the field for over seven years. If you are concerned that your application may induce uneven loads or forces or if the need for a slide operating vertically exists, consider el-tron s nti-reep Ô retainer design. 1
nti-reep Linear Slides *Travel is 1/ distance from center in either direction. MOEL -1 - -3 TRVEL*.5 LO PITY L 1.5 1.5 1.5 WEIGHT OZ.1.15.5 LENGTH 1.5 1 HEIGHT.3.3.3 WITH.3.3.3 moment load ratings + load / life formulas. pg. 9 RRIGE HOLE SPING E 1.156.156.156 HEIGHT F.135.135.135 SE IMENSIONS WITH G.156.156.156 HOLE SPING H 1-1 - -3 - -5-6.5. 3.. 5. 1 1 16 1..5. 1.1 1. 1.5 1.6.6 3.6.6 5.6 6.6.3.3.3.3.3.3.56.56.56.56.56.56 1 3 5.1.1.1.1.1.1.17.17.17.17.17.17 1 3 3.5.5 E-1 E- E-3 E- E-5 E-6.5. 3.. 5. 1 1 1 16 1..9 1.3 1.7.1.5 1.6.6 3.6.6 5.6 6.6.1.1.1.1.1.1 1 3 5 1 3 3.5.5 M-1 M- M-.5 M-3 M-.5. 3. 1 1 13 15 1 1. 1.7 1.9. 5. 1.56.56 3.6 3.56.56.5.5.5.5.5 1 3.37.37.37.37.37.5.5.5.5.5 1 3 SERIES RRIGE HOLES (I) SE HOLE d SE HOLE 1 SE HOLE h OUNTER ORE SREW SIZE -56 UN- THRE -56 UN - - N/ -56 UN- THRE.11.1.1 # E - UN- THRE.15.19.15 # M 6-3 UN- THRE.15.19.15 # N 6-3 UN- THRE.157..15 #6 S1 6-3 UN- THRE.157..15 #6 S 6-3 UN- THRE.157..15 #6 S3 1-3 UNF- THRE..3.5 #1 11
SPEIFITIONS: MOEL S3-6 S3-9 S3-1 # OF HOLES ** 6 ** ** 1 Straight Line ccuracy.5²/inch of travel Positional Repeatability.² Finish lear anodize carriage and black anodize base. Other finishes on request. oefficient of Friction.3 typical onstruction luminum carriage and base, hardened steel shafts and balls, mild steel end caps. For all metric slides please call for our metric catalog. *Travel is 1/ distance from center in either direction. MOEL TRVEL* LO PITY L WEIGHT OZ LENGTH HEIGHT moment load ratings + load / life formulas. pg 9 WITH RRIGE HOLE SPING E HEIGHT F SE IMENSIONS WITH G HOLE SPING H N-1 N- N-3 N- N-6 N- N-1. 3.. 6.. 15 1 5 35 1.3.3 3. 5. 6. 7.. 1.56.56 3.56.56 6.. 1..53.53.53.53.53.53.53 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1 3. 5.5 7.5 9.5.37.37.37.37.37.37.37.31.31.31.31.31.31.31.5.5.5.5.5.5.5 1.15.15 3.15 3. 5. 7. S1-1 S1- S1-3 S1-3.5 S1- S1-6 S1-. 3. 3.5. 6.. 15 5 35 5 55.9.3 6. 6.7. 9. 11.5. 3.. 5. 6.. 1..6.6.6.6.6.6.6 1 3 5 7 9........5 3.5 3.5. 5. 7. S-1 S-1.5 S- S-3 S- S-6 S-. 3.. 6.. 5 6 75 9. 6. 6.5. 11. 15.7 19.5. 3.5. 6.. 1. 1 1 1 1 1 1 1 1.15 3 5.5 7.5 9.5....... 1 3.5. 5. 7. S3-1 S3-1.5 S3- S3-3 S3- S3-5 S3-6 S3-9 S3-1. 3.. 5. 6. 9. 1. 35 6 11 135 15 15 5 1. 1. 15.. 7. 31. 35. 6.5 5..6.6. 5. 6.. 9. 1. 15..6.6.6.6.6.6.6.6.6.15 1 3.. 5. 7. **3. **3. **3. 1 1 1 1 1 1 1 1 1.15 1 3 5 7 7. 1. 13. 1
Non-Magnetic Linear Slides 6 Reasons to choose el-tron Non-Magnetic all Slides el-tron all Slides Load Ratings and Life Estimates The rated load capacity of el-tron ball slides may be a mass load on a horizontal slide,or a force load normal to the mounting surface in any position. The rated load must be centered and distributed over the slide, and the base must be fully supported on a flat mounting surface so that the ball slide does not act as a beam subject to concentrated or distributed bending forces. Loads supported by protruding arms reduce accuracy and load capacity by acting as levers or ratio arms, and should be avoided even when load forces are small. When used at the rated load capacity and moderate speeds, a life of 1 million inches of travel can be expected.the expected life at one half the rated load is 1 million inches. 1. Non-Magnetic lightweight design.. Silicon nitride ceramic ball bearings, titanium shafts, aluminum carriage and base, brass fasteners. 3. Factory preload minimizes side play and provides low friction.. Self cleaning ball bearing design offers long life and requires no lubrication. 5. Standard mounting holes simplify installation. 6. Mounting surfaces, parallel to the line of motion, provide straight line accuracy to.5"/" of travel. Friction and Lubrication The coefficient of friction is lower for linear ball bearings than for rotary bearings, where the peripheral track is shorter on the inner race than on the outer race, causing the ball to skid on one or the other. The balls run exactly equal distances on the pair of tracks in linear bearings, permitting the ball to run without friction, wear, or skidding at any preload.the typical coefficient of friction for el-tron ball slides is.3. Lubrication is recommended for speeds above 1 inches/min, and is advisable at lower speeds where high loads are applied in continuous duty applications. Mounting and ccuracy The mounting surfaces of the ball slide are machined flat and smooth, and parallel to each other and the line of motion. They must be mounted on smooth, flat supports that will not deflect under load. Especially with long slides of small cross section, binding may be caused by distortion of the bottom member when mounted on irregular surfaces. If so, round shims or spacers may be placed over the mounting screws to raise the slide above the surface asperities. edding in epoxy resin is also recommended. The specified accuracy for all standard el-tron ball slides is.5inch/inch of travel. This is measured by comparison of the line of travel to a master straight edge, using a gage or indicator mounted on the slide. 13
1 Non-Magnetic Linear all Slides.5. 3.. 5..5. 3.. 5..5. 3. 1.. 3.6.. 5.. 3. 3.6.. 5. 3. 3.6 3.9.5 5...5. 1.1 1. 1.5..9 1.3 1.7.1.5 1. 1.7 1.9. 5. 1.6.6 3.6.6 5.6 6.6 1.6.6 3.6.6 5.6 6.6 1.56.56 3.6 3.56.56.3.3.3.3.3.3.1.1.1.1.1.1.5.5.5.5.5.56.56.56.56.56.56 1 3 5 1 3 5 1 3.1.1.1.1.1.1.37.37.37.37.37.17.17.17.17.17.17.5.5.5.5.5 1 3 3.5.5 1 3 3.5.5 1 3 MOEL TRVEL* LO PITY L WEIGHT OZ LENGTH HEIGHT WITH HEIGHT F WITH G HOLE SPING H RRIGE HOLE SPING E SE IMENSIONS SERIES RRIGE HOLES (I) SE HOLE d SE HOLE 1 SE HOLE h OUNTER ORE SREW SIZE -56 UN- THRE.11.1.1 # E - UN- THRE.15.19.15 # M 6-3 UN- THRE.15.19.15 # N 6-3 UN- THRE.157..15 #6 S1 6-3 UN- THRE.157..15 #6 S 6-3 UN- THRE.157..15 #6 S3 1-3 UNF- THRE..3.5 #1 *Travel is 1/ distance from center in either direction. -1-NMS --NMS -3-NMS --NMS -5-NMS -6-NMS E-1-NMS E--NMS E-3-NMS E--NMS E-5-NMS E-6-NMS M-1-NMS M--NMS M-.5-NMS M-3-NMS M--NMS
15 SPEIFITIONS: Straight Line ccuracy.5²/inch of travel Positional Repeatability.² Finish lear anodize carriage and black anodize base. Other finishes on request. oefficient of Friction.3 typical onstruction Silicon nitride ceramic ball bearings, titanium shafts, aluminum carriage base and end caps, brass fasteners. MOEL S3-6 S3-9 S3-1 # OF HOLES ** 6 ** ** 1. 3.. 6... 3. 3.5. 6... 3.. 6... 3.. 5. 6. 9. 1..5 5. 6. 7.5 9. 1.5 1..5 6. 7.5 9. 1.5 13.5 16.5 6. 9. 1.6 15.6 1..5 7. 1.3.3 3. 5. 6. 7...9.3 6. 6.7. 9. 11.5. 6. 6.5. 11. 15.7 19.5 1.56.56 3.56.56 6.. 1.. 3.. 5. 6.. 1.. 3.5. 6.. 1..6.6. 5. 6.. 9. 1. 15..53.53.53.53.53.53.53.6.6.6.6.6.6.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1 1 1 1 1 1 1.6.6.6.6.6.6.6.6.6 1 3. 5.5 7.5 9.5 1 3 5 7 9 1.15 3 5.5 7.5 9.5.15 1 3.. 5. 7. **3. **3. **3..37.37.37.37.37.37.37 1 1 1 1 1 1 1 1 1.31.31.31.31.31.31.31...............5.5.5.5.5.5.5 1.15.15 3.15 3. 5. 7..5 3.5 3.5. 5. 7. 1 3.5. 5. 7..15 1 3 5 7 7. 1. 13. MOEL TRVEL* LO PITY L WEIGHT OZ LENGTH HEIGHT WITH RRIGE HOLE SPING E HEIGHT F WITH G HOLE SPING H SE IMENSIONS 9. 1.5 1.6 6. 35..5 5. 55.5 61.5 1. 1. 15.. 7. 31. 35. 6.5 5. *Travel is 1/ distance from center in either direction. N-1-NMS N--NMS N-3-NMS N--NMS N-6-NMS N--NMS N-1-NMS S1-1-NMS S1--NMS S1-3-NMS S1-3.5-NMS S1--NMS S1-6-NMS S1--NMS S-1-NMS S-1.5-NMS S--NMS S-3-NMS S--NMS S-6-NMS S--NMS S3-1-NMS S3-1.5-NMS S3--NMS S3-3-NMS S3--NMS S3-5-NMS S3-6-NMS S3-9-NMS S3-1-NMS
rossed Roller Slides 6 Reasons to choose el-tron rossed Roller Slides el-tron rossed Roller Slides el-tron s new series of crossed roller slides, offer designers additional flexibility in their choice of ready to install components for precision linear transfer. Our crossed roller slides, when compared to our ball slide products of equal size, offer higher load carrying capacity and, when operating at high cycling rates or with shock and overhanging loads, improved performance. Most importantly, our crossed roller slides provide high accuracy,.1²/inch of travel, and repeatability,.1², exceeding our precision ball slides. lthough crossed roller slides cost more than equivalent size ball slides, their overall performance, especially in applications where heavy loads must be moved in compact assemblies, often justifies selection. 1. Positive stops prevent over travel.. Rollers improve load capacity 6- times that of balls. 3. Precision ground shafts provide straight line accuracy of.1 per inch of travel.. lternately crossed rollers handle force in any direction. 5. Lightweight aluminum carriage and base. 6. Interchangeable with many types of ball slides. Operation rossed roller slides physically resemble ball slides except for the bearing design. Specifically, each slide is comprised of an aluminum carriage straddling an aluminum base. Using a bearing system containing cylindrical steel rollers, the carriage glides, almost friction free, over the base. The rollers, alternately crisscrossed with each other, move between a set of, partially flat, parallel, smooth rods on each side of the base. The rollers share a larger contact surface with the rods as compared to the point contact of steel balls. This bearing design allows crossed roller slides to carry larger loads and absorb greater load impacts than equivalent size ball slides. rossed roller slides are not as naturally self-cleaning in operation as ball slides. In operating environments, with little or no protection against dust and when heavy loads are not a consideration, consider el-tron s ball slides. Wide Selection el-tron offers over 7 models of crossed roller slides. Load capacities range from lb to 779 lb, with travel from.5² to 1². Installation into your system is simple. ounterbored holes in the base permit quick attachment to your assembly. omponents attach to the carriage in the existing threaded mounting holes. 16
rossed Roller Slide ssemblies moment load ratings + load / life formulas. pg. 95 *Travel is 1/ distance from center in either direction. MOEL TRVEL* LO PITY L WEIGHT OZ LENGTH LO RTINGS N LIFE ESTIMTES rossed roller slide rated load capacities may be a mass load on a horizontal slide, or a force load normal to the mounting surface in any position. The rated load must be centered and distributed over the slide, and the base must be supported on a flat mounting surface. void concentrated or distributed bending forces. t rated load capacity and moderate speeds, expected life is 1 million inches of travel. The expected life at one half the rated load is 1 million inches. HEIGHT WITH RRIGE HOLE SPING E LURITION The crossed roller slides are lightly lubricated during assembly. dditional lubrication is required for speeds above 1 inches/min. and is advisable at lower speeds where high loads are applied in continuous duty applications. MOUNTING Mount the crossed roller slides on flat surfaces to provide full support to the base. HEIGHT F SE IMENSIONS WITH G HOLE SPING H R-1 R- R-3 R- R-5 R-6.5. 3.. 5. 55 66 71 9..6.9 1. 1.3 1.6 1.6.6 3.6.6 5.6 6.6.3.3.3.3.3.3.56.56.56.56.56.56 1 3 5.1.1.1.1.1.1.17.17.17.17.17.17 1 3 3.5.5 RE-1 RE- RE-3 RE- RE-5 RE-6.5. 3.. 5. 7 9 9 1 1.5 1. 1. 1...6 1.6.6 3.6.6 5.6 6.6.1.1.1.1.1.1 1 3 5 1 3 3.5.5 RM-1 RM- RM-.5 RM-3 RM-.5. 3. 7 7 7 3 9 1.3 1...3. 1.56.56 3.6 3.56.56.5.5.5.5.5 1 3.37.37.37.37.37.5.5.5.5.5 1 3 SERIES R RE RM RN RS1 RS RS3 RRIGE HOLES (I) -56 UN- THRE - UN- THRE 6-3 UN- THRE 6-3 UN- THRE 6-3 UN- THRE 6-3 UN- THRE 1-3 UNF- THRE SE HOLE d.11.15.15.157.157.157. SE HOLE 1.1.19.19....3 SE HOLE h.1.15.15.15.15.15.5 OUNTER ORE SREW SIZE # # # #6 #6 #6 #1 E I F h 1 G d H 17
SPEIFITIONS: Straight line accuracy.1²/inch of travel MOEL RS3-6 RS3-9 RS3-1 # OF HOLES ** 6 ** ** 1 Positional repeatability oefficient of friction onstruction.1².3, typical luminum carriage and base, hardened steel rods and rollers, stainless steel end caps. Finish lack anodize. Other finishes on request. moment load ratings + load / life formulas. pg. 95 *Travel is 1/ distance from center in either direction. MOEL TRVEL* LO PITY L WEIGHT OZ LENGTH HEIGHT WITH RRIGE HOLE SPING For all metric slides please call for our metric catalog. E HEIGHT F SE IMENSIONS WITH G HOLE SPING H RN-1 11 1. 1.56.53 1.6 1.37.31.5 1.15 RN- 13..56.53 1.6.37.31.5.15 RN-3. 3.1 3.56.53 1.6 3.37.31.5 3.15 RN- 3. 6 5.3.56.53 1.6..37.31.5 3 RN-6. 5 6.1 6..53 1.6 5.5.37.31.5. RN- 6. 9 7...53 1.6 7.5.37.31.5 5. RN-1. 3. 1..53 1.6 9.5.37.31.5 7. RS1-1 13 3...6 1. RS1-. 176.5 3..6..5 RS1-3 3. 176 6...6 3. 3.5 RS1-3.5 3.5 1 6.9 5..6. 3.5 RS1-.. 6..6 5.. RS1-6 6. 36 9...6 7. 5. RS1-. 13 11.7 1..6 9. 7. RS-1 13.1. 1 1. 1 RS-1.5 15 6.1 1.15. RS-. 176 6.6 3.5 1. RS-3 3. 176.. 1 3. 3.5 RS-. 1.1 6. 1 5.5.. RS-6 6. 375 16.. 1 7.5. 5. RS-. 5 19. 1. 1 9.5. 7. RS3-1 5 1.3.6.6.15 1.15 RS3-1.5 6 1.3.6.6 1 1 1 RS3-. 35 16...6 3. 1 3 RS3-3 3.. 5..6. 1 RS3-.. 6..6 5. 1 5 RS3-5 5. 73 33...6 7. 1 7 RS3-6 6. 7 3. 9..6 **3. 1 7. RS3-9 9. 7. 1..6 **3. 1 1. RS3-1 1. 779 61. 15..6 **3. 1 13. 1
Precision Series 6 Reasons to choose el-tron Precision Series (all or rossed Roller Slides) 1. orrosion resistant hardened series stainless steel internal components. Up to 5² wide cross section. 3. Interchangeable with other manufacturer s products.. Low friction straight line design. 5. djustable preload. 6. Straight line design with.5² repeatability Precision Series (all or rossed Roller Slides) el-tron s Precision Series all and Roller Slides offer the designer an aluminum base and carriage with hardened stainless components for superior corrosion resistance and less chance of particulate contamination. vailable in standard low profile mounting, the designer can choose a style of bearing and type of rolling element specifically to meet the needs of the most particular applications. Preload can be adjusted to change the friction and axial play characteristics therefore customizing th slide to its intended use. new 5-inch wide cross section allows the movement of bulky devices without the necessity of constructing tables with more than one unit. 19
Precision Series all Slides SPEIFITIONS: Straight Line ccuracy.1²/² of travel. Repeatability.5². oefficient of Friction.. onstruction luminum carriage and base. Hardened series stainless steel balls, shafts, pre-load gibs. Interchangeable with other manufacturers. Economical all Slide design. Finish lack nodize. Other finishes on request. E I F h G d 1 H 1 moment load ratings + load / life formulas. pg. 95 *Travel is 1/ distance from center in either direction. Model M- M-3 M- LO PITY Travel* Lbs. Weight (in.) (lbs.) 1.. 3. 1 3.15.175.5.56 3.56.56.5 3 d.15 1.19 - - - E.37 F.5 G. H 3 h.15 I #6-3 S-1 S-1.5 S- S-3 S- 1. 1.5. 3.. 3 5 6.5.3.1.5.63. 3.5. 5. 1 1.15 3.157. - - - - -..7 1 3.5.5.15 #6-3 S3-1 S3- S3-3 S3- S3-5 S3-6 1.. 3.. 5. 6. 35 6 9 1 139 15.65 1.5 1.5.6. 5. 6.. 9..6.15 3.. 5. 7. 6...3 - - - - - 3. 1.61.15 3 5 7 7..5 #1-3 S5-3 S5-5 S5-7 3. 5. 7. 9 1 17.5 3.5.5 5. 7. 9. 5.. 6...1.1. 3....61 3.7. 6... 1/-
Precision Series rossed Roller Slides SPEIFITIONS: Straight Line ccuracy.1²/² of travel. Repeatability.5². oefficient of Friction.. Finish lack nodize. Other finishes on request. onstruction luminum carriage and base. Hardened series stainless steel rollers, shafts, pre-load gibs. Interchangeable with other manufacturers. Load capacities up to 1 lbs. rossed Roller design offers self-aligning ways and greater load capacity. E I 1 G F F h h d d 1 H H 1 *Travel is 1/ distance from center in either direction. moment load ratings + load / life formulas. pg. 95 Model RS-1 RS- RS-3 RS- Travel* (in.) 1.. 3.. LO PITY Lbs. Weight (lbs.) 1 1 1..6.56.63. 3.5. 5. 1 1 3 d.157 1. - - - - E F. G.7 H 1 3.5.5 h.15 I #6-3 RS3-1 RS3- RS3-3 RS3- RS3-5 1.. 3.. 5. 1 1.66 1.5..6. 5. 6...6.15 3.. 5. 7...3 - - - - - 1.61.15 3 5 7.5 #1-3 RS5-3 RS5-5 RS5-7 3. 5. 7. 6.5 3.5.5 5. 7. 9. 5.. 6...1.1. 3....61 3.7. 6... 1/- 1
High Precision Series 6 Reasons to choose el-tron High Precision Series (all or rossed Roller Slides) 1. Stable flanged base style available. Superior accuracy and repeatability. 3. Precision ground carriage and base.. orrosion resistant hardened stainless steel internal components. 5. igger cross sections and lengths for heavy loads and large moving parts. 6. Smooth low friction motion. High Precision Series (all or rossed Roller Slides) el-tron s High Precision Series all and rossed Roller Slides offer the designer highly accurate travel characteristics..² per inch of travel with superior repeatability of.². The base and carriage inner surfaces are ground to submicron tolerances while the mounting surfaces are flat to within.1² per inch. The standard low profile style incorporates a base which is surrounded by the carriage leaving little surface to attract and hold contaminants. flanged base style is offered to allow robust mounting at points to assure stability in high impact or rough duty environments. These slides utilize el-tron s straight line design which allows lower friction characteristics along with the option to manipulate the preload to adjust to the needs of the application. New larger widths and lengths up to 5² wide and 15² long increase the versatility of this design.
High Precision Series all Slides (Low Profile) SPEIFITIONS: Straight Line ccuracy.²/² of travel. Repeatability.². oefficient of Friction.. Finish lack nodize. Other finishes on request. onstruction luminum carriage and base. Hardened series stainless steel balls, shafts, pre-load gibs. Interchangeable with other manufacturers. arriage and base ground to optical flatness. earing way surfaces held to submicron tolerances. arriage surface flat to.1²/². all Slide design offers low rolling resistance and economical price. HPM SERIES ONLY 1 F h d H 1 moment load ratings + load / life formulas. pg. 96 *Travel is 1/ distance from center in either direction. Model HPM-1 HPM- HPM-.5 HPM-3 Travel* (in.).5 1. 1.5. LO PITY Lbs. 15 5 Weight (lbs.).6.11.16. 1.5 3.5 1 1.5. 3.5.5 1.15 d.15 1.19 E L F. G. H 3. h.15 I #- HPS-1 HPS-1.5 HPS- HPS-3 1. 1.5. 3. 5 31 51..3.6.56. 3.5..5 3. 3.5.5 1 1.15 3.157...7 1 3.5.15 #6-3 HPS3-1 HPS3- HPS3-3 HPS3- HPS3-5 1.. 3.. 5. 7 1 13 15.66 1.5..6. 5. 6...6.37 5.37 6.37.37.6.15 3.. 5. 7...3 1.6.15 3 5 7.5 #1-3 HPS- HPS-3 HPS-5 HPS-6.5 HPS-9. 3. 5. 6.5 9. 1 1 16 175... 5.13 7.. 5. 1.5.5 6.5.5 1 1 3.5. 6. 1...3..6 1.9.5 6.5.5 #1-3 HPS5-5 HPS5-7 HPS5-1 5. 7. 1. 15 1 5 1. 1.5 1.15.5 1. 15. 15.5. 5 6 1. 13..1.1..9 3.7 6 1. 13.. 1/- 3
High Precision Series all Slides (Flange ase) SPEIFITIONS: Straight Line ccuracy.²/² of travel. Repeatability.². oefficient of Friction.. Finish lack nodize. Other finishes on request. onstruction luminum carriage and base. Hardened series stainless steel balls, shafts, pre-load gibs. Interchangeable with other manufacturers. arriage and base ground to optical flatness. earing way surfaces held to submicron tolerances. arriage surface flat to.1²/². Flange ase design allows ease of mounting and stability. HPM SERIES ONLY F h d H 1 moment load ratings + load / life formulas. pg 96 *Travel is 1/ distance from center in either direction. 1 Model HPM-1F HPM-F HPM-.5F HPM-3F Travel* (in.).5 1. 1.5. LO PITY Lbs. Weight (lbs.) 15 5..1..6 1.5 3.5 1 1.5. 3.5 1.15 d.15 1.19 E L F.5 H1 H 3. h.15 I #- K.5 HPS-1F HPS-1.5F HPS-F HPS-3F 1. 1.5. 3. 5 31 51.3.5.61. 3.5..5 3. 3.5.5 1.31 1 1.15 3.157..6 1.31 1 3.5.15 #6-3. HPS3-1F HPS3-F HPS3-3F HPS3-F HPS3-5F 1.. 3.. 5. 7 1 13 15.91 1. 1.1..6. 5. 6...6.37 5.37 6.37.37 1.6.15 3.. 5. 7...3 1.6.15 3 5 7.5 #1-3.37 HPS-F HPS-3F HPS-5F HPS-6.5F HPS-9F. 3. 5. 6.5 9. 1 1 16 175.5 3.59 5. 6.1. 5. 1.5.5 6.5.5 1 1 3.5. 6. 1...3..99.5 6.5.5 #1-3.37 HPS5-5F HPS5-7F HPS5-1F 5. 7. 1. 15 1 5 1. 17. 1.76.5 1. 15. 15.5 5 6 1. 13..1.1. 1.35 5. 6 1. 13.. 1/-.37
High Precision Series rossed Roller Slides (Low Profile) SPEIFITIONS: Straight Line ccuracy.²/² of travel. Repeatability.². oefficient of Friction.. Finish lack nodize. Other finishes on request. onstruction luminum carriage and base. Hardened series stainless steel rollers, shafts, pre-load gibs. Interchangeable with other manufacturers. arriage and base ground to optical flatness. earing way surfaces held to submicron tolerances. arriage surface flat to.1²/². rossed Roller design greatly increases load capacity and overhung load capability. E I 1 F h G d H 1 *Travel is 1/ distance from center in either direction. moment load ratings + load / life formulas. pg. 96 Model HPRS-1 HPRS-1.5 HPRS- HPRS-3 Travel* (in.) 1. 1.5. 3. LO PITY Lbs. 9 115 1 1 Weight (lbs.)..3.6.56. 3.5. 1.5 3. 3.5.5 1 1.15 3 d.157 1. E F. G.7 H 1 3.5 h.15 I #6-3 HPRS3-1 HPRS3- HPRS3-3 HPRS3- HPRS3-5 1.. 3.. 5. 5 35 39.66 1.5..6. 5. 6...6.37 5.37 6.37.37.6.15 3.. 5. 7...3 1.6.15 3 5 7.5 #1-3 HPRS- HPRS-3 HPRS-5 HPRS-6.5 HPRS-9. 3. 5. 6.5 9. 6 3 35... 5.13 7.. 5. 1.5.5 6.5.5 1 1 3.5. 6. 1...3..6 1.9.5 6.5.5 #1-3 HPRS5-5 HPRS5-7 HPRS5-1 5. 7. 1. 36 5 1. 1.5 1.15.5 1. 15. 15.5. 5 6 1. 13..1.1..9 3.7 6 1. 13.. 1/- 5
High Precision Series rossed Roller Slides (Flange ase) SPEIFITIONS: Straight Line ccuracy.²/² of travel. Repeatability.². oefficient of Friction.. Finish lack nodize. Other finishes on request. onstruction luminum carriage and base. Hardened series stainless steel rollers, shafts, pre-load gibs. Interchangeable with other manufacturers. arriage and base ground to optical flatness. earing way surfaces held to submicron tolerances. arriage surface flat to.1²/². Flange ase with crossed roller design offers the ultimate in accuracy, capacity and stability. E I K F h H 1 d 1 H 1 moment load ratings + load / life formulas. pg. 96 *Travel is 1/ distance from center in either direction. Model HPRS-1F HPRS-1.5F HPRS-F HPRS-3F Travel* (in.) 1. 1.5. 3. LO PITY Lbs. Weight (lbs.) 9 115 1 1.3.5.61. 3.5. 1.5 3. 3.5.5 1.31 1 1.15 3 d 1.157. E F.6 H1 1.31 H 1 3.5 h.15 I #6-3 K. HPRS3-1F HPRS3-F HPRS3-3F HPRS3-F HPRS3-5F 1.. 3.. 5. 5 35 39.91 1. 1.1..6. 5. 6...6.37 5.37 6.37.37 1.6.15 3.. 5. 7...3 1.6.15 3 5 7.5 #1-3.37 HPRS-F HPRS-3F HPRS-5F HPRS-6.5F HPRS-9F. 3. 5. 6.5 9. 6 3 35.5 3.59 5. 6.1. 5. 1.5.5 6.5.5 1 1 3.5. 6. 1...3..99.5 6.5.5 #1-3.37 HPRS5-5F HPRS5-7F HPRS5-1F 5. 7. 1. 36 5 1. 17. 1.76.5 1. 15. 15.5 5 6 1. 13..1.1. 1.35 5. 6 1. 13.. 1/-.37 6
Mini Posi-rive Stages 6 Reasons to choose el-tron Mini Posi-rive Stages (LS1, LRS1 Series) el-tron Mini Posi-rive Stages 1. Positive lead screw drive.. Zero backlash. 3. Friction-free linear ball or roller slides.. ccurate, repeatable linear travel. 5. ompact adaptable configuration. 6. daptable to standard Nema onfigurations. ompact Posi-rive series LS1 and LRS1 stages have a height of only 1 inch and a width of only 1. inch. These stages provide the same outstanding.1 inch straight line accuracy per inch of travel and.1 inch repeatability as the larger LS3 series Posi-rive line. The new smaller stages also offer a compact, flexible configuration and are adaptable to standard Nema configurations. The LS1 Posi-rive stages offer a.16 inch diameter.15 lead screw, an anti-backlash nut and a flexible zero backlash coupling that accepts a Nema 1 motor. They provide a load-carrying capacity of up to pounds. The stages are available in travel lengths ranging from 1 inch to inches. el-tron also provides special configurations, motor mounts, hand crank actuation and a variety of leads and pitches. The new positioners are available with either linear ball or crossed roller slides and can be configured for one, two, or three-axis positioning. In the ball slide version, precision steel balls roll in the raceway grooves with contact at four points, enabling load and moment to be carried on all directions. Rolling resistance is extremely low, ensuring smooth and stable operation. rossed roller slides physically resemble ball slides except for the bearing design. The rollers share a larger contact surface with the rods as compared to the point contact of steel balls. This bearing design allows crossed roller slides to carry larger loads and absorb greater load impacts than equivalent size ball slides. 7
el-tron â Mini Posi-rive ä Stages Specifications rive:.16 diameter.15 lead screw with anti-backlash nut. oupling: Flexible zero backlash coupling. Motor Mount: ccepts Nema 1 motor Travel: 1² - ² nti-friction Slide: Linear ball or crossed roller slide. Load apacity: Up to lbs. onfiguration: 1, or 3 axis. ccuracy: Straight line, up to.1² per inch of travel. Repeatability:.1² Finish: lack nodize. Other finishes on request lso available are special configurations, motor mounts, hand crank actuation, and a variety of leads and diameters. Nomenclature Part number for Mini Posi-rive Stage L S1 1 15 E PNP 1 xxx Lead screw actuator S1 = all slide type RS1 = rossed roller slide type Travel in inches 1 3 Lead screw pitch =.² 5=.5² 96=.96² 15=.15² Standard 1=.1² 5=² 375=² onfiguration E=end of travel H=home position switch EH=combined X single XY double XYZ triple Length of cable 1=1 meter 3=3 meter Lead screw diameter Type of sensor.16² PNP NPN
moment load ratings + load / life formulas. pg. 96 *Travel is 1/ distance from center in either direction. all Slide Mini Posi-rive LS1-1-15 LS1--15 LS1-3-15 LS1--15 Travel* 1² ² 3² ².7 5.7 6.7.3. 3.. 6..7.7.7.3 1 3 5 H.5 3.5. L.31.1 1.31.31 S 1.19.69.99.99 Load apacity L 1 15 Maximum Recommended Revolutions Per Second Lead:.²,.5²,.96² RPS Lead:.15²,.1², ², ² 1 RPS moment load ratings + load / life formulas. pg. 96 *Travel is 1/ distance from center in either direction. Roller Slide Mini Posi-rive Travel* H LRS1-1-15 LRS1--15 LRS1-3-15 LRS1--15 1² ² 3² ².7 5.7 6.7.3. 3.. 6..7.7.7.3 1 3 5.5 3.5. L.31.1 1.31.31 S 1.19.69.99.99 Load apacity L 15 9
Mini Posi-rive ä Series LS1, LRS1 esigned for NEM 1 motor frame, other motor adaptors available. Supplied with coupling for.196 ² (5mm) motor shaft. ouplings with inch and metric bore available. Uses.16 ² diameter leadscrew with anti-backlash nut. Standard lead is.15². Leads available at no additional cost. ²,.5 ²,.96 ²,.1 ², ², and ². Standard travels of 1,, 3, and ².5 1. 1. 1..69.197 ia. ore in oupling #6-3 Thread Thru - plcs 1. 1..69.5 ia. O.. of oupling. 1.66 ia. Pilot for 1 Frame Motor.15 ia. Thru - plcs H 'ore for #6 Screw - plcs
LIMIT N POSITION SWITHES EOT (End Of Travel) and HPS (Home Position Switches) el-tron Precision offers the addition of EOT and HPS to all 3 sizes of the Posi-rive series. The EOT kit and the HPS kit could be used together or independently. The stand alone kits can be added to any of the 3 sizes of the Posi-rive series. The EOT kit comes with switches mounted to the base at each end. There are flags that are mounted to the carriage. These flags are adjustable for either the full range of travel or for limited amount of travel if the application requires such. The Home Position Switch kit comes with 1 switch mounted to the base in the center. There is an adjustable flag mounted to the carriage. The adjustable flag will allow the Home Position to be set anywhere along the entire range of travel. The EOT and HPS are easily mounted to brackets, which are then attached to the base. The flags are easily assembled to a bracket that is then attached to the carriage. The base and carriage have the threaded mounting holes available for easy assembly of the brackets. The switches are photoelectric sensors that operate on a supply voltage of 5 to V. The repeatability is." and the response time is 1µseconds. The sensors are available in both NPN and PNP outputs. The sensors are equipped with a quick fitting Hook-Up onnector with cable lengths in 1m or 3m. Part Numbering System for EOT and HPS E-PNP-1 X-XXX-X X-onfiguration- E=EOT, H=HPS, EH=ombined XXX=Type of Sensor, PNP or NPN X=Length of able, 1=1meter, 3= 3 meter Part Number and Price List E-PNP-1 $15 E-NPN-1 $15 H-PNP-1 $6 H-NPN-1 $6 EH-PNP-1 $1 EH-NPN-1 $1 LS1 and LRS1 SERIES TRVEL J 1. 3..5 3. 3.5 6. 5.5 Prices are the same for the 3 meter length cable and connector. 31
Mini Posi-rive Stages 6 Reasons to choose el-tron Mini Posi-rive Stages (LS, LRS Series) el-tron Mini Posi-rive Stages 3 1. Positive lead screw drive.. Zero backlash. 3. Friction-free linear ball or roller slides.. ccurate, repeatable linear travel. 5. ompact adaptable configuration. 6. daptable to standard Nema onfigurations. ompact Posi-rive series LS and LRS stages have a height of only 1.65 inch and a width of only 1 inch. These stages provide the same outstanding.1 inch straight line accuracy per inch of travel and.1 inch repeatability as the larger LS3 series Posi-rive line. The new smaller stages also offer a compact, flexible configuration and are adaptable to standard Nema configurations. The LS Posi-rive stages offer a inch diameter lead screw, an anti-backlash nut and a flexible zero backlash coupling that accepts a Nema 17 motor. They provide a load-carrying capacity of up to 6 pounds. The stages are available in travel lengths ranging from 1 inch to inches. el-tron also provides special configurations, motor mounts, hand crank actuation and a variety of leads and pitches. The new positioners are available with either linear ball or crossed roller slides and can be configured for one, two, or three-axis positioning. In the ball slide version, precision steel balls roll in the raceway grooves with contact at four points, enabling load and moment to be carried on all directions. Rolling resistance is extremely low, ensuring smooth and stable operation. rossed roller slides physically resemble ball slides except for the bearing design. The rollers share a larger contact surface with the rods as compared to the point contact of steel balls. This bearing design allows crossed roller slides to carry larger loads and absorb greater load impacts than equivalent size ball slides.
el-tron Mini Posi-rive Stages Specifications rive: diameter lead screw with anti- backlash nut. oupling: Flexible zero backlash coupling. Motor Mount: ccepts Nema 17 motor Travel: 1² - ² nti-friction Slide: Linear ball or crossed roller slide. Load apacity: Up to 6lbs. onfiguration: 1, or 3 axis. ccuracy: Straight line, up to.1² per inch of travel. Repeatability:.1² Finish: lack nodize. Other finishes on request lso available are special configurations, motor mounts, hand crank actuation, and a variety of leads and diameters. Nomenclature Part number for Mini Posi-rive Stage Lead screw actuator L S = all slide type RS = rossed roller slide type S Travel in inches 1 1.5 3 1 5 Lead screw diameter Lead screw pitch =.5² 5=.5² 6=.6² 1=.1² =.² 5=² Standard 5=.5² 1=.² E onfiguration E=end of travel H=home position switch EH=combined PNP Type of sensor PNP NPN 1 xxx X single XY double XYZ triple Length of cable 1=1 meter 3=3 meter 33
moment load ratings + load / life formulas. pg. 96 *Travel is 1/ distance from center in either direction. all Slide Mini Posi-rive LS-1-5 LS-1.5-5 LS--5 LS-3-5 LS--5 Travel* H 1² 1.5² ² 3² ². 5.63 6.13 6..63.5 3. 3.5.5 6. 1.15 3 5.5 1 3.5. L 1.15 S 1.65 1.75 1.5.65 1.775 Load apacity L 1 15 5 Maximum Recommended Revolutions Per Second Lead:.5²,.5²,.6²,.1² RPS Lead:.², ²,.5², 1.² 1 RPS moment load ratings + load / life formulas. pg. 96 *Travel is 1/ distance from center in either direction. Roller Slide Mini Posi-rive Travel* H LRS-1-5 LRS-1.5-5 LRS--5 LRS-3-5 LRS--5 1² 1.5² ² 3² ². 5.63 6.13 6..63.5 3. 3.5.5 6. 1.15 3 5.5 1 3.5. L 1.15 S 1.65 1.75 1.5.65 1.775 Load apacity L 5 6 3
Mini Posi-rive Series LS, LRS esigned for NEM 17 motor frame, other motor adaptors available. Supplied with coupling for 5mm motor shaft. ouplings with inch and metric bore available. Uses ² diameter leadscrew with anti-backlash nut. Standard lead is ². Leads available at no additional cost.5 ²,.5 ²,.6 ²,.1 ²,. ², ²,.5 ², and ². Standard travels of 1, 1.5,, 3, and ².6 1.31 1 1 1.65 1. 5mm ia. ore ore in oupling #6-3 Thread Thru - Places 1.65 1..5 ia. O.. of oupling.65 ia. Pilot for 17 Frame Motor.5 ia. learance.136 ia. Thru - Places H 'ore for #6 Screw - Places.1. 1.65 35
LIMIT N POSITION SWITHES EOT (End Of Travel) and HPS (Home Position Switches) el-tron Precision offers the addition of EOT and HPS to all 3 sizes of the Posi-rive series. The EOT kit and the HPS kit could be used together or independently. The stand alone kits can be added to any of the 3 sizes of the Posi-rive series. The EOT kit comes with switches mounted to the base at each end. There are flags that are mounted to the carriage. These flags are adjustable for either the full range of travel or for limited amount of travel if the application requires such. The Home Position Switch kit comes with 1 switch mounted to the base in the center. There is an adjustable flag mounted to the carriage. The adjustable flag will allow the Home Position to be set anywhere along the entire range of travel. The EOT and HPS are easily mounted to brackets, which are then attached to the base. The flags are easily assembled to a bracket that is then attached to the carriage. The base and carriage have the threaded mounting holes available for easy assembly of the brackets. The switches are photoelectric sensors that operate on a supply voltage of 5 to V. The repeatability is." and the response time is 1µseconds. The sensors are available in both NPN and PNP outputs. The sensors are equipped with a quick fitting Hook-Up onnector with cable lengths in 1m or 3m. Part Numbering System for EOT and HPS E-PNP-1 X-XXX-X X-onfiguration- E=EOT, H=HPS, EH=ombined XXX=Type of Sensor, PNP or NPN X=Length of able, 1=1meter, 3= 3 meter Part Number and Price List E-PNP-1 $15 E-NPN-1 $15 H-PNP-1 $6 H-NPN-1 $6 EH-PNP-1 $1 EH-NPN-1 $1 LS and LRS SERIES TRVEL J 1 1 1.5 3. 3.5 3 3 6. 5 Prices are the same for the 3 meter length cable and connector. 36
Posi-rive Stages 6 Reasons to choose el-tron Posi-rive Stages el-tron â Posi-rive ä Stages 1. Positive lead screw drive.. Zero backlash. 3. Friction-free linear ball or roller slides.. ccurate, repeatable linear travel. 5. ompact adaptable configuration. 6. daptable to standard Nema onfigurations. ompact, economical Posi-rive stages from el-tron take the work out of designing motion control systems. Our stages require no alignment of components, install with only four standard fasteners, are fitted with anti-backlash lead screws, multi-beam couplings with high speed misalignment capability and standard NEM motor mounts. vailable in one, two or three axis configurations with either ball or crossed roller slides, these stages travel up to 1².The crossed roller slide option increases load capacity up to 1 lbs. and 1 million inches of travel is possible at 1/ rated load. 37
el-tron Posi-rive Stages Specifications rive: 3/² diameter.1 lead screw with anti-backlash nut. oupling: Flexible zero backlash coupling. Motor Mount: ccepts Nema 3 motor Travel: 1² - 1² nti-friction Slide: Linear ball or crossed roller slide. Load apacity: Up to 1lbs. onfiguration: 1, or 3 axis. ccuracy: Straight line, up to.1² per inch of travel. Repeatability:.1² Finish: lack nodize. Other finishes on request lso available are special configurations, motor mounts, and hand crank actuation. variety of leads and diameters. re available at no additional cost. Nomenclature Part number for Posi-rive Stage L S3 1 1 E PNP 1 xxx Lead screw actuator S3 = all slide type RS3 = rossed roller slide type Travel in inches 1 3 6 1 1 Lead screw diameter Lead screw pitch 5=.5² 6=.65² 1=.1² Standard 1=.15² =.² 5=² onfiguration E=end of travel H=home position switch EH=combined Type of sensor PNP NPN X single XY double XYZ triple Length of cable 1=1 meter 3=3 meter 5=.5² 1=² 3
esigned for NEM 3 motor frame. Supplied with coupling for motor shaft. Uses 3/ diameter lead-screw with anti-backlash nut. Standard lead is.1. Standard travels of 1-1 Other motor adapters and coupling with inch and metric bore available as special order. Leads available in.5,.65,.1,.15,.,,.5, and 1 Posi-rive MOEL LS3-1-1 LS3--1 LS3-3-1 LS3--1 LS3-6-1 LS3--1 LS3-1-1 LS3-1-1 5.63 3. 6.63. 7.63 5..63 6. 1.63 9. 15.63 1 1.63 13. 1.63 15..15 3.. 5. P 1 1 1 1 E.63.63.63.63 3.63.63 5.63 6.63 F..5.5.5.5 G.5. 3.5.5 5.5 6.5 H. 6.. 1. H1 3 5 7. 9. 1 13. J..31.31.31 K.31. 1.31 1.1.5.5.5.5 L.1.6 1.1 1.6 3.1.1 5.1 6.1 M N 3.731 3.731 3.731 3.731.16.16.16.16 R.3.3.3 1 3 S.6 1.56 1.6.56 -.9-1.9 -.9-3.9 LRS3-1-1 LRS3--1 LRS3-3-1 LRS3--1 LRS3-6-1 LRS3--1 LRS3-1-1 LRS3-1-1 5.63 3. 6.63. 7.63 5..63 6. 1.63 9. 15.63 1 1.63 13. 1.63 15..15 3.. 5. 1 1 1 1.63.63.63.63 3.63.63 5.63 6.63..5.5.5.5.5. 3.5.5 5.5 6.5. 6.. 1. 3 5 7. 9. 1 13...31.31.31.31. 1.31 1.1.5.5.5.5.1.6 1.1 1.6 3.1.1 5.1 6.1 3.731 3.731 3.731 3.731.16.16.16.16.3.3.3 1 3.6 1.56 1.6.56 -.9-1.9 -.9-3.9 Lead:.5²,.65²,.1² Maximum Recommended Revolutions Per Second Lead:.15²,.², ²,.5², 1.² RPS 1 RPS moment load ratings + load / life formulas. pg. 96 *Travel is 1/ distance from center in either direction. Posi-rive LO TRVEL* PITY MOEL LS3-1-1 LS3--1 LS3-3-1 LS3--1 LS3-6-1 LS3--1 LS3-1-1 LS3-1-1 INHES 1 3 6 1 1 L. 35 5 55 6 75 9 LRS3-1-1 LRS3--1 LRS3-3-1 LRS3--1 LRS3-6-1 LRS3--1 LRS3-1-1 LRS3-1-1 1 3 6 1 1 6 7 9 11 1 15 1 39
arriage imensions for for Posi-rives Posi-rive with 11 - - " ² of of Travel E F 1 G. arriage imensions for for Posi-rive Posi-rives with 6-1" ² of Travel F 3. 3. G..1 1.15 ia... 1-3 Thread Places 1-3 Thread Places 1 1-3 Thread "L" ²P² Places PLES.69 ore of coupling for NEM 3 Motor. K J H H1.313 'ore for #1 Socket Hd ap Screw Places (1" Travel, Places) Y xis daptor Plate for 6,, 1 & 1" of travel E Y xis L 1 L M 1 N X xis Y xis Z xis is centered over Y xis Motor enterline of Z xis is in Same Plane as Motor enterline of X xis Z xis racket E Y xis daptor Plate for 6,, 1 & 1" of travel X xis L L M 1 1 R S (+) Z xis Extends eyond X xis S (-) Z xis is Inside X xis E
LIMIT N POSITION SWITHES EOT (End Of Travel) and HPS (Home Position Switches) el-tron Precision offers the addition of EOT and HPS to all 3 sizes of the Posi-rive series. The EOT kit and the HPS kit could be used together or independently. The stand alone kits can be added to any of the 3 sizes of the Posi-rive series. The EOT kit comes with switches mounted to the base at each end. There are flags that are mounted to the carriage. These flags are adjustable for either the full range of travel or for limited amount of travel if the application requires such. The Home Position Switch kit comes with 1 switch mounted to the base in the center. There is an adjustable flag mounted to the carriage. The adjustable flag will allow the Home Position to be set anywhere along the entire range of travel. The EOT and HPS are easily mounted to brackets, which are then attached to the base. The flags are easily assembled to a bracket that is then attached to the carriage. The base and carriage have the threaded mounting holes available for easy assembly of the brackets. The switches are photoelectric sensors that operate on a supply voltage of 5 to V. The repeatability is." and the response time is 1µseconds. The sensors are available in both NPN and PNP outputs. The sensors are equipped with a quick fitting Hook-Up onnector with cable lengths in 1m or 3m. Part Numbering System for EOT and HPS E-PNP-1 X-XXX-X X-onfiguration- E=EOT, H=HPS, EH=ombined XXX=Type of Sensor, PNP or NPN X=Length of able, 1=1meter, 3= 3 meter Part Number and Price List E-PNP-1 $15 E-NPN-1 $15 H-PNP-1 $6 H-NPN-1 $6 EH-PNP-1 $1 EH-NPN-1 $1 LS3 and LRS3 SERIES TRVEL J 1 3.. 3 3 5. 6. 5 6 9. 1 1 1 13. 1 1 15. 1 Prices are the same for the 3 meter length cable and connector. 1
Friction Free ir ctuator 6 Reasons to choose el-tron â ir ctuators el-tron â ir ctuators Pneumatically actuated crossed roller slide assemblies controlled by a pair of irpot ä actuators, provide extremely low friction and stiction characteristics. light touch or physical obstruction will stop the unit s movement to prevent damage to delicate and expensive equipment and parts. Low pressure operation is possible. The PNRE series requires less than 1 psi to operate. 1. Low Pressure operation: <1 PSI. Low Friction: <1gm 3. Wide range variable speed: smooth, slow and high speed capabilities.. Precise, gentle handling of wafers, chips and surface mount devices. 5. Ideal for fluid sample handling and adhesive deposition. 6. el-tronrossed Roller Slide, driven by ir ctuated ashpots, provides a frictionless interface for up to ² travel in a compact package. Each slide is comprised of an aluminum carriage straddling an aluminum base. Using a bearing system containing cylindrical steel rollers, the carriage glides, almost frictionfree, over the base. The rollers, alternately crisscrossed with each other, move between a set of four, partially flat, parallel, smooth rods on each side of the base. The el-tron â Straight Line esign ä makes possible the low stiction and friction characteristics el-trons are known for, unlike recirculating designs in which the rolling elements must turn corners and often slide against each other as they travel. irpot ä Pneumatic ctuators are ultra low friction devices designed to provide precise, repeatable motion at very high or low speeds without seals or lubrication. They run clean and operate over a wide temperature range with no change in performance. The basic construction consists of a graphitized carbon piston, precision ground to millionths of an inch TIR, inside an annealed, borosilicate glass cylinder with a precision fire polished bore.
Measurements in Inches *Travel is 1/ distance from center in either direction. MOEL PNRE-1 PNRE- PNRE-3 TRVEL*.5 1.. 3.19.7 7.7.6.6 3.6 1 1 L 6.331 7. Load apacity lbs. 5 5 5 Measurements in Millimeters *Travel is 1/ distance from center in either direction. MOEL PNRE-1M PNRE-M PNRE-3M TRVEL* 1 5 5 1 5 5 7 1 1 66 L 7 11 19 Load apacity lbs. 5 5 5 3
all Slide Positioning Stages (Micrometer riven) 6 Reasons to choose el-tron all Slide Positioning Stages 1. Versatile- Smooth, accurate travel for intermittent motion applications.. Positive Locking- Side mounted lock feature prevents movement of carriage. 3. ccurate Measurements- arriages are spring loaded against micrometer heads with.1² (.1mm) graduations.. daptable- One, two or three axis models can be used in any orientation. 5. Easy To Use- Standard counterbored holes in base and threaded holes in carriage. 6. Wide Selection- Subminiature and low profile models. el-tron all Slide Positioning Stages el-tron offers over 6 models of positioning slides. Used for gauging and positioning light and medium loads, applications include measuring instruments and optical assemblies. el-tron positioners, built with the same rigorous manufacturing demands as our ball slide assemblies, offer the benefits of quality construction. Spring loaded micrometer drives allow precise repeatable adjustments with low friction and zero backlash. (Micrometers available in inch or metric units.) Slides provide accuracy to.5²/inch of travel and repeatability of.1². Over 6 models support load capacities to 6 lb. Our full line includes the subminiature series with the smallest commercially available positioner, the standard series, ideal for most gauging and positioning applications, and our heavy duty series providing high load capacities with the same high accuracy and repeatability. Positioning slides can be stacked for multi-axis applications. Standard stacked units are available in XY and XYZ configurations. Preloaded positioning slides, fully assembled, arrive ready for your use. Positioners are available in black anodized finish or other finishes on request.
Nomenclature Part numbering system for positioning stages XXXX X XX XXX asic model number (X) Single axis (XY) ouble axis (P) enotes plain model no micrometer head, bracket or springs Options (XYZ) Triple axis (M) Metric micrometer heads with standard inch threaded holes (MM) Metric threaded holes with metric micrometer heads (LM) Locking micrometer head (LO) Low profile Z axis (PL) Posi-Lock carriage lock Posi-Lock feature consists of steel shim and extended micrometer bracket secured by a screw mounted to the side of the stage carriage. This allows the user to positively lock the position of the carriage during use. Posi-Lock is standard on the model 99 and optional on all others. Locking micrometer heads are available to positively lock the micrometer setting. Not available for models 99, 11, 1, 1. Space saving side mount micrometer head style available. See page 53 Loads in Z axis will extend springs if too heavy. Series, 5, 7, 1, and 3 have micrometer bracket reversed to prevent this and increase Z axis capacity ustom designs quoted on request. Metric threaded mounting holes optional at no additional cost. Metric Micrometer Heads available at no additional cost. (P) Plain Style are free floating slides without micrometer head, brackets or springs. (P-PL) Plain with Posi-Lock available, only on 1,, & 3 series. 5
all Slide Positioning Stages Specifications: Straight Line ccuracy.5²/inch of travel Repeatability.² oefficient of Friction.3 typical rive Micrometer,.1² graduations standard,.1 mm graduations optional onstruction luminum carriage and base, hardened steel shafts and balls, mild steel endcaps Finish lack anodize standard; other finishes on request *Travel is 1/ distance from center in either direction. WORK SURFE MOEL 99 11 1 1 TRVEL*.5 (6.mm).5 (13mm).5 (13mm).5 (13mm) X X 1.5 X 1.5 1 X 1 X moment load ratings + load / life formulas. pg. 97. 3.5 3 3.5 OVERLL IMENSIONS.53.3.3.6 LO PITY, L L Hx X, XY Z 5 1 1.5 1.5 1.5 THROUGH HOLE.31 I. 5 51 53 75 751 753.5 (13 mm) (5 mm).5 (13 mm).5 (13 mm) (5 mm).5 (13 mm) 1 X 1 1 X 1 1 X 1.6 X.6.6 X.6.6 X.6.3 5..3 5.5 6 5.5 6 6 6.5 I. I. 1 51 5 71 7.5 (13 mm).5 (13 mm) (5 mm).5 (13 mm) (5 mm). X 1 3.5 X 1 3.5 X 1. X.6. X.6.6 5.6 7.1 6.6.5 6 6 11 13 1 3 31 3 33 3 (5 mm) (5 mm) (5 mm). (5mm) (5 mm). (5mm) (5 mm).(5mm) (5 mm).(5mm) 3.1 X 3.1 3.1 X 3.1.1 X.1.1 X.1.1 X.1.1 X.1 5.1 X 5.1 5.1 X 5.1 5.1 X 5.1 5.1 X 5.1 7.5 7.5.5 1.5.5 1.5 9.5 11.5 9.5 11.5 PLIN MOELS (WITHOUT MIROMETER, RKETS OR SPRINGS). X N XY ONFIGURTIONS ONLY..91.91.91.91.91.91.91.91.91.91 I. I. I.. I.. I. 11P 1P 1P 51P 5P 751P 75P.5 (13mm).5 (13mm).5 (13mm) (5mm) (5mm) (5mm) (5mm) 1.5 X 1.5 1 X 1 X 1 X 1 1 X 1.6 X.6.6 X.6.3.3.6 1 6 6.31 I..5 I. I. 1P 1P 5P 6P 35P 36P. (5mm). (5mm) 3. (75mm) 3. (75mm). (1mm). (1mm) 3.1 X 3.1 3.1 X 3.1.1 X.1.1 X.1 5.1 X 5.1 5.1 X 5.1.91.91.91.91.91.91 I. I.. I. 6
inch (mm).53 (13.5) Knurled Locking Screw "Z" racket.3 (.).56 (1.3). -56 (M) Holes (19) Knurled Locking Screw.5 (19). (5.6) Nominal 1.6 (6.9).531 (13.5) (7.9).31.31 (7.9). (57.9) Nominal.1 (.5).53 (13.5).56 (1.3).531 (13.5) 'ore For No. -56 (M) Holes SERIES 99 Space saving side mount micrometer head style is available. See page 56 inch (mm) MOEL 11 XYZ 1 XYZ G.3².² (9.7) (11.3) 1.65 P (Nominal) (3.1) Nominal OPTIONL POSI-LOK FOR SERIES 1,.5 (5.7) E L "Z" racket F.6 (15.7) SERIES 1 G ² (5.) ² (3.1) (19) N O E F M N O P ² (5.).69² (17.5).5² (1.7) ² (5.).69² (17.5).9² (3.9) 1.65 (3.1) ² (3.1) 1.19² (3.1) ² (5.) ² (3.1) 1.19² (.) 1.² (36.6) 1.515 (3.5) Hx M L (Nominal) No. -56 (M) 1 Holes 'ore for No. -56 (M) Holes SERIES 1, 7
inch (mm) SERIES 5 75.² (11.).69² (17.5).69² (17.5) ² (5.) 1.1² (.) ² (3.1) J 1.6² (1.1).² (5.).6² (66.5) K Hy.3² (.1) 1.5² (31.) ² (3.1).6² (1.5).² (5.) SLOT.3² () x.² ().5² (3) x² (5) ² (5) x ²(3) L L "Z" racket Slot K "Z" racket Hy XYZ LOW PROFILE J Hy SERIES, 5, 75 XYZ STNR inch (mm) Space saving side mount micrometer head style is available. See page 56 SERIES 5 75 M 1.17² 1.31².² (.1) (33.3) (5.) MTG. SREW ORE #-(M3) #6-(M) #1-(M5) O ² (.) ² (.) ² (3.1) SERIES 1 5,53 51 75,753 751 P 1.16² 1.77².39² 1.77².39² (9.5) (5.) (6.7) (5.) (6.7) OPTIONL POSI-LOK FOR SERIES, 5, 75. (6.1) P.395 (6.) (Nominal) Nominal.16 (.1).16 (.1) 1.17 (.1).3 (9.7).3 (9.7) (5.) No 6-3 (M) 6 holes 1.31 (33.3) (5.) ia Optional - L (Nominal) 1.17 (.1) (5.).31 () ia No. - (M3) holes.5 (13) ia Optional holes on 1.31 (33.3).. No 1-3 (M5) holes on. (5.).. 'ore for Mounting Screw Holes enter Hole Slot in ase SERIES SERIES 5 SERIES 75 Hx O N M SERIES, 5, 75
inch (mm) SERIES 5 7 SERIES 1,51 5 71 7 J 1.56².6² P 1.77.39 1.77.39 K (39.6) (5.3).3² (5.) (6.7) (5.) (6.7) O (.) (.) (55.6) (55.6) Hy 1.69² (.9) 1.69² (.9).19² (55.6) SERIES E M 5.5² (1.7) ²(.).5² (6.).55² (1.) ²(.).5² (6.) 1.6² (1.1) ² (69.9) 7 ² (5.) 1.5² (31.).5²(1.7) 3.3² (5.9). HOLES 1 OPTIONL POSI-LOK FOR SERIES, 5, 7 THRE 6-3 UN (M) 6-3 UN (M) 1-3 UNF (M5) ORE FOR 6-3 (M) 6-3 (M) 1-3 (M5) P.39 (6.7) (Nominal) Nominal "Z" RKET L "Z" RKET (6.) L "Y" STKING PLTE.19 (.) Thick "Y" STKING PLTE.19 (.) Thick.5 (1.7) 1.1 (.) 1XYZ VILLE LOW STYLE ONLY Hy J K Hy XYZ STNR MOELS (Z MIROMETER REVERSE) L (nominal) E Thread - See Table O Hx M 'ore Holes See Table SERIES, 5, 7 Space saving side mount micrometer head style is available. See page 56 inch (mm) SERIES 1 3 J.5² 3.² 3.² K (65.5).33² (.) (7.).5² (13.) (7.) 1.9² (7.7) Hy 1.² 1.² 1.² (6.) (6.) (6.) SLOT ² x.² (5.x5.) ² x.5² (3.1x63.5).² x.² (5.x11.6).3 (5.9) PL (Nominal) OPTIONL POSI-LOK ä FOR SERIES 1,, 3 SERIES M 1 3 ² (66.6).15² (53.9) ² (66.6) 3² (9.) 3.15² (79.3) 3² (9.) ² (117.).15² (1.7) ² (117.) 1.5 (31.) ENTER HOLE (OPTIONL) ² I. (5) ² I (3).² I. (5) L SLOT "Z" RKET SERIES P 11,1: 1 (.5) 1,:.5 (57.) 31,3: (69.9 ) 1.5 (31.) 1.5 No. 1-3 (M5) K L (Nominal) J Hy Hx XYZ STNR MOELS (Z MIROMETER REVERSE) SERIES 1,, 3 M 'ore for No. 1-3 (M5) Holes 9
rossed Roller Positioning Stages (Micrometer riven) 6 Reasons to choose el-tron â rossed Roller Positioning Stages 1. High apacity- Greater load bearing capacity than ball types. etter for impacts and overhanging loads.. Straight Line ccuracy- Runout of.1 inch per inch of travel. 3. Wide Range- arriages up to 5.15² square with four inches of travel.. Smooth ccurate Movement- Spring forces hold carriage against micrometer head. Factory adjusted preload offers friction free running. 5. Subminiature Sizes- R99 among the smallest commercially available roller stages 3/ inch square. 6. Positive Locking- Posi- Lock feature guards against el-tron â rossed Roller Positioning Stages el-tron offers over 6 models of positioning slides. Used for gauging and positioning light and medium loads, applications include measuring instruments and optical assemblies. el-tron positioners, built with the same rigorous manufacturing demands as our crossed roller slide assemblies, offer the benefits of quality construction. Spring loaded micrometer drives allow precise repeatable adjustments with low friction and zero backlash. (Micrometers available in inch or metric units.) Slides provide accuracy to.1²/inch of travel and repeatability of.1². Over 6 models, support load capacities to 16 lb. Our full line includes the subminiature series with the smallest commercially available positioner, the standard series, ideal for most gauging and positioning applications, and our heavy duty series providing high load capacities with the same high accuracy and repeatability. Positioning slides can be stacked for multiaxis applications. Standard stacked units are available in XY and XYZ configurations. Preloaded positioning slides, fully assembled, arrive ready for your use. Positioners are available in black anodized finish or other finishes on request. 5
Nomenclature Part numbering system for positioning stages XXXX X XX XXX asic model number (X) Single axis (XY) ouble axis (P) enotes plain model no micrometer head, bracket or springs Options (XYZ) Triple axis (M) Metric micrometer heads with standard inch threaded holes (MM) Metric threaded holes with metric micrometer heads (LM) Locking micrometer head (LO) Low profile Z axis (PL) Posi-Lock carriage lock Posi-Lock feature consists of a steel shim and extended micrometer bracket secured by a screw mounted to the side of the stage carriage. This allows the user to positively lock the position of the carriage during use. Posi-Lockis standard on the model R99 and optional on all others Locking micrometer heads are available to positively lock the micrometer setting. Not available for models R99, R11, R1, R1. Space saving side mount micrometer head style available. See page 53. Loads in Z axis will extend springs if too heavy. Series R, R5, R7, R1, R and R3 have micrometer bracket reversed to prevent this and increase Z axis capacity. ustom designs quoted on request. Metric threaded mounting holes optional at no additional cost. Metric Micrometer Heads available at no additional cost. (P) Plain style are free floating slides without micrometer head, brackets or springs. (P-PL) Plain with Posi-Lock available. Only on R1, R, & R3 series. 51
rossed Roller Positioning Stages Specifications: Straight Line ccuracy.1²/inch of travel Repeatability.1² oefficient of Friction.3 typical rive Micrometer,.1² graduations standard,.1 mm graduations optional onstruction luminum carriage and base, hardened steel shafts and balls, mild steel endcaps Finish lack anodize standard; other finishes on request *Travel is 1/ distance from center in either direction. WORK SURFE MOEL TRVEL* X R 99 R11 R1 R1.5 (6.mm).5 (13mm).5 (13mm).5 (13mm) X 1.5 X 1.5 1 X 1 X moment load ratings + load / life formulas. pg. 97. 3.5 3 3.5 OVERLL IMENSIONS.53.3.3.6 LO PITY, L L Hx X, XY Z 3 3 1.5 1.5 1.5 THROUGH HOLE.31 I. R5 R51 R53 R75 R751 R753.5 (13 mm) (5 mm).5 (13 mm).5 (13 mm) (5 mm).5 (13 mm) 1 X 1 1 X 1 1 X 1.6 X.6.6 X.6.6 X.6.3 5..3 5.5 6 5.5 1 1 1.5 I. I. R1 R51 R5 R71 R7.5 (13 mm).5 (13 mm) (5 mm).5 (13 mm) (5 mm). X 1 3.5 X 1 3.5 X 1. X.6. X.6.6 5.6 7.1 6.6.5 16 16 R11 R13 R1 R R3 R R31 R3 R33 R3 (5 mm) (5 mm) (5 mm).(5mm) (5 mm).(5mm) (5 mm).(5mm) (5 mm).(5mm) 3.1 X 3.1 3.1 X 3.1.1 X.1.1 X.1.1 X.1.1 X.1 5.1 X 5.1 5.1 X 5.1 5.1 X 5.1 5.1 X 5.1 7.5 7.5.5 1.5.5 1.5 9.5 11.5 9.5 11.5 PLIN MOELS (WITHOUT MIROMETER, RKETS OR SPRINGS), X N XY ONFIGURTIONS ONLY. R11P R1P R1P R51P R5P R751P R75P.5 (13mm).5 (13mm).5 (13mm) (5mm) (5mm) (5mm) (5mm) 1.5 X 1.5 1 X 1 X 1 X 1 1 X 1.6 X.6.6 X.6.91.91.91.91.91.91.91.91.91.91.3.3.6 5 5 5 5 5 5 5 5 5 5 3 3 1 1 I. I. I.. I.. I..31 I..5 I. I. R1P R1P R5P R6P R35P R36P. (5mm). (5mm) 3. (75mm) 3. (75mm). (1mm). (1mm) 3.1 X 3.1 3.1 X 3.1.1 X.1.1 X.1 5.1 X 5.1 5.1 X 5.1.91.91.91.91.91.91 5 5 5 5 5 5 I. I.. 5
inch (mm).53 (13.5) Knurled Locking Screw "Z" racket.3 (.).56 (1.3). -56 (M) Holes (19) Knurled Locking Screw (19). (5.6) Nominal 1.6 (6.9).531 (13.5) (7.9).31.31 (7.9). (57.9) Nominal.1 (.5).53 (13.5).56 (1.3).531 (13.5) 'ore For No. -56 (M) Holes SERIES R99 inch (mm) Space saving side mount micrometer head style is available. See page 56 OPTIONL POSI-LOK ä FOR SERIES R1, R SERIES R11 R1 ² ² (5.) (3.1) E F M N O P ² (5.).69² (17.5).5² (1.7) ² (5.).69² (17.5).9² (3.9) 1.65² ² (3.1) 1.19² (3.1) ² (5.) ² (3.1) 1.19² (.) 1.² (36.6) 1.515² (3.1) (3.5) MOEL R11 XYZ R1 XYZ G.3² (9.7).² (11.) SERIES R1, R 53
inch (mm) SERIES R R 5 R 75.² (11.).69² (17.5).69² (17.5) ² (5.) 1.1² (.) ² (3.1) J 1.6² (1.1).² (5.).6² (66.5) K.3².6² (.1) (1.5) Hy 1.5² ².² (31.) (3.1) (5.) SLOT.3² () x.² ().5² (3) x² (5) ² (5) x ²(3) L L "Z" racket Slot K "Z" racket Hy XYZ LOW PROFILE J Hy SERIES R, R5, R75 inch (mm) Space saving side mount micrometer head style is available. See page 56 SERIES R R5 R75 M 1.17² 1.31².² MTG. SREW ORE #-M3 #6-M #1-M5 O (.) (.) (3.1) SERIES R1 R5,R53 R51 R75,R753 R751 P 1.16² (9.5) 1.77² (5.).39² (6.7) 1.77² (5.).39² (6.7) OPTIONL POSI-LOK FOR SERIES R, R5, R75. (6.1) P.395 (6.) (Nominal).16 (.1).16 (.1) 1.17 (.1).3 (9.7).3 (9.7) (5.) No 6-3 (M) 6 holes 1.31 (33.3) (5.) ia Optional - L (Nominal) 1.17 (.1) (5.).31 () ia No. - (M3) holes.5 (13) ia Optional holes on 1.31 (33.3).. No 1-3 (M5) holes on. (5.).. 'ore for Mounting Screw Holes enter Hole Slot in ase SERIES R SERIES R5 SERIES R75 O Hx N M SERIES R, R5, R75 5
inch (mm) OPTIONL POSI-LOK FOR SERIES R, R5, R7 L "Z" racket "Y" Stacking Plate.19 (.) Thick L "Z" racket "Y" Stacking Plate.19 (.) Thick (6.) P.39 (Nominal) (6.7) Nominal.5 (1.7) 1.1 (.) Hy J K Hy MOEL R1-XYZ VILLE MOEL R5 & R7 XYZ LOW STYLE ONLY XYZ STNR MOELS (Z MIROMETER REVERSE) E Thread - See Table SERIES E M R R5.5² (1.7) ²(.).5² (6.).55² (1.) ²(.).5² (6.) 1.6² (1.1) ² (69.9) R7 ² (5.) 1.5² (31.).5²(1.7) 3.3² (5.9). HOLES 1 THRE 6-3 UN (M) 6-3 UN (M) 1-3 UNF(M5) ORE FOR 6-3 (M) 6-3 (M) 1-3 (M5) L (Nominal) Hx SERIES R R5 R7 J K 1.56² (39.6).6² (5.3).3² Hy 1.69² (.9) 1.69² (.9).19² (55.6) SERIES R1,R51 R5 R71 R7 P 1.77.39 1.77.39 (5.) (6.7) (5.) (6.7) O (.) (.) (55.6) (55.6) O M 'ore Holes See Table SERIES R, R5, R7 inch (mm) Space saving side mount micrometer head style is available. See page 56 SERIES R1 R R3 L J.5² 3.² 3.² K Hy (65.5).33² (.3) 1.² (7.).5² (13.1) 1.² (7.) 1.9² (7.69) 1.² (6.) (6.) (6.) SLOT ² x.² (5.x5.) ² x.5² (3.1x63.5).² x.² (5.x11.6).3 (5.9) XYZ STNR MOELS (Z MIROMETER REVERSE) PL (Nominal) SERIES R1 R R3 OPTIONL POSI-LOK FOR SERIES R1, R, R3 SERIES P R11,R1: 1 R1,R:.5 R31,R3: M ² (66.6).15² (53.9) ² (66.6) 3² (9.) 3.15² (79.3) 3² (9.) ² (117.).15² (1.7) ² (117.) 1.5 (31.) 1.5 1.5 (31.) ENTER HOLE (OPTIONL) ² I. (5) ² I (3).² I. (5) SLOT "Z" RKET No. 1-3 (M5) K L (N(Nominal) J Hy Hx SERIES R1, R, R3 M 'ore for No. 1-3 (M5) Holes 55
ompact Side rive Positioners 6 Reasons to choose el-tron â Side rive Positioning Stages el-tron â Side rive Positioning Stages el-tron offers over 5 models of positioning slides. (vailable in either ball bearing or crossed roller type.) 1. Versatile- Reduced overall length makes el-tron â Side rive stages ideal for restricted space applications.. Posi- Lock - Optional positive locking feature prevents movement of carriage. 3. ccurate Measurements: arriages are spring loaded against micrometer heads with.1 (.1mm) graduations.. daptable- One, two or three axis models can be used in any orientation. 5. Easy To Use- Standard counterbored holes in base and threaded holes in carriage. 6. Wide Selection- Subminiature and low profile models. Used for gauging and positioning light and medium loads, applications include measuring instruments and optical assemblies. el-tron positioners, built with the same rigorous manufacturing demands as our ball slide assemblies, offer the benefits of quality construction. Spring loaded micrometer drives allow precise repeatable adjustments with low friction and zero backlash. (Micrometers available in inch or metric units.) Slides provide accuracy to.1²/inch of travel and repeatability of.1². Models can support load capacities to 16 lb. Our full line includes the subminiature series with the smallest commercially available positioner, the standard series, ideal for most gauging and positioning applications, and our heavy duty series providing high load capacities with the same high accuracy and repeatability. Positioning slides can be stacked for multiaxis applications. Standard stacked units are available in XY and XYZ configurations. Preloaded positioning slides, fully assembled, arrive ready for your use. Positioners are available in black anodized finish or other finishes on request. 56
Nonmenclature Part numbering system for positioning stages X XXXX X XX XXX (lank) all (R) rossed Roller asic model number (M) Metric micrometer heads with standard inch threaded holes (MM) Metric threaded holes with metric micrometer heads (X) Single axis (XY) ouble axis Options (XYZ) Triple axis (LM) Locking micrometer head (LO) Low profile Z axis (PL) Posi-Lock carriage lock Posi-Lock feature consists of steel shim and extended micrometer bracket secured by a screw mounted to the side of the micrometer bracket. This allows the user to positively lock the position of the carriage during use. Posi-Lock is standard on the model 99S, R99S and optional on all others. Locking micrometer heads are available to positively lock the micrometer setting. Not available for models 99S, 11S, 1S, 1S, R99S, R11S, R1S, R1S ustom designs quoted on request. Metric threaded mounting holes optional at no additional cost. Metric micrometers available at no additional cost. 57
Side rive Positioning Stages Specifications: Straight Line ccuracy Repeatability oefficient of Friction rive onstruction Finish all:.5²/inch of travel Roller:.1² /inch of travel all:.²/inch of travel Roller:.1² /inch of travel.3 typical Micrometer,.1² graduations standard,.1 mm graduations optional luminum carriage and base, hardened steel shafts and balls or rollers, mild steel endcaps lack anodize standard; other finishes on request moment load ratings + load / life formulas. pg. 97 *Travel is 1/ distance from center in either direction. all Slide 99S 11S 1S 1S MOEL TRVEL* WORK SURFE rossed Roller Slide R99S R11S R1S R1S.5 (6. mm).5 (13 mm).5 (13 mm).5 (13 mm) X X 1.5 X 1.5 1 X 1 X L 1..16..1 OVERLL IMENSIONS Hx W X, XY Z.53.3.3.6 1.9 1.6.1 5 1 all Slide LO PITY, L.5 6 3 3 rossed Roller Slide X, XY Z 1 13 THROUGH HOLE.31 I. 5S 51S 53S 75S 751S 753S R5S R51S R53S R75S R751S R753S.5 (13 mm) (5 mm).5 (13 mm).5 (13 mm) (5 mm).5 (13 mm) 1 X 1 1 X 1 1 X 1.6 X.6.6 X.6.6 X.6.95.51.95 3.5. 3.5..55. 3.7 3.3 3.7 6 6 6 1 1 1 1 1 1 6 6 6.5 I. I. 1S 51S 5S 71S 7S R1S R51S R5S R71S R7S.5 (13 mm).5 (13 mm) (5 mm).5 (13 mm) (5 mm). X 1 3.5 X 1 3.5 X 1. X.6. X.6.95.15.51.9 5.1...55 3.31 3.3 6 6 16 16 11S 13S 1S S 3S S 31S 3S 33S 3S R11S R13S R1S RS R3S RS R31S R3S R33S R3S (5 mm) (5 mm) (5 mm). (5 mm) (5 mm). (5 mm) (5 mm). (5 mm) (5 mm). (5 mm) 3.1 X 3.1 3.1 X 3.1.1 X.1.1 X.1.1 X.1.1 X.1 5.1 X 5.1 5.1 X 5.1 5.1 X 5.1 5.1 X 5.1 6.76 6.76 5.1 6.76 5.1 6.76.91.91.91.91.91.91.91.91.91.91.. 5. 5. 5. 5. 6. 6. 6. 6. 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 I. I. I.. I.. I. 5
inch (mm) SERIES 99S, R99S inch (mm) MOEL 11S, R11S 1S, R1S XYZ XYZ G.3².² OPTIONL POSI-LOK FOR SERIES 1S, S, R1S, RS LL SERIES 1S S ROLLER SERIES R1S RS ² ² ² ² E.69² 1.19² F.5² ² M ².5² N.69² 1.19² O.9² 1.² P.611².611² N O SERIES 1S, S, R1S, RS 59
LL SERIES S 5S 75S ROLLER SERIES RS R5S R75S.².69².9² ² 1.1² ² J ².3² K.315².² Hy 1.5² ².² SLOT.3²() x.²().5²(13) x²(5) ²(5) x ²(3) XYZ LOW PROFILE XYZ STNR SERIES S, 5S, 75S, RS, R5S, R75S LL SERIES S 5S 75S ROLLER SERIES RS R5S R75S M 1.17² 1.31².² O ² ² ² MTG. SREW ORE #-M3 #6-M #1-M5 LL SERIES 1S 5S 51S 53S 75S 751S 753S MOEL ROLLER SERIES R1S R5S R51S R53S R75S R751S R753S P.631² ² ² ² 1.7² 5² 5² OPTIONL POSI-LOK ä FOR SERIES S, 5-S, 75S, RS, R5S, R75S SERIES S, RS SERIES 5S, R5S SERIES 75S, R75S 6 SERIES S, 5S, 75S, RS, R5S, R75S
inch (mm) ROLLER SERIES S 5S 7S ROLLER SERIES RS R5S R7S J 1.9² 1.9².56² K.573².366² Hy 1.69² 1.69².19².5².55² ² ² ² 1.5² E.5².5².5². HOLES 1 THRE 6-3 UN (M) 6-3 UN (M) 1-3 UNF (M5) ORE FOR 6-3 (M) 6-3 (M) 1-3 (M5) M 1.6² ² 3.3² O ² ² ² MOEL 1 51 5 71 7 P ² ² 5² 1.9² 5² OPTIONL POSI-LOK ä FOR SERIES S, 5S, 7S, RS, R5S, R7S 1S-XYZ, R1S-XYZ VILLE LOW STYLE ONLY XYZ STNR MOELS O SERIES S, 5S, 7S, RS, R5S, R7S inch (mm) LL SERIES 1S S 3S ROLLER SERIES R1S RS R3S J.5² 3.² 3.² K.33².5² 1.9² SLOT ² x.² ² x.5².² x.² Hy 1.² 1.² 1.² ² 3² ².15² 3.15².15² M ² 3² ² P 1².19² ² ENTER HOLE (OPTIONL) ² I. (5MM) ² I (3MM).² I. (5MM) OPTIONL POSI-LOK ä FOR SERIES 1S, S, 3S, R1S, RS, R3S XYZ STNR MOELS SERIES 1S, S, 3S, R1S, RS, R3S 61
Low Profile rossed Roller Slide Tables 6 Reasons to choose el-tron Low Profile rossed Roller Slide Tables 1. ompact & Low Profile.. High ccuracy (.1²/1²) Travel. 3. Inch Type Mounting Holes.. Light Weight luminum arriage. 5. Series Stainless Steel Models vailable 6. 1 Size & Travel ombinations. Low Profile Slide Tables el-tron LPT slides are low profile, high accuracy slide tables featuring easily adjustable preload and light weight aluminum carriage. Standard inch type threaded and counterbored holes allow easy mounting and installation. The bearing base consists of a two sided single inner rail flanked by two precision V grooved outer rails. High precision rollers captive in a stainless steel cage and positive internal travel stops assure smooth accurate reciprocating motion. series Stainless steel models (ss) offer aluminum carriage with stainless steel rails, rollers, cages and fasteners. LPT slides are ideal anywhere low friction reciprocating mechanisms are used in automated equipment. 6
Low Profile rossed Roller Tables Specifications: Straight Line ccuracy.1² per inch of travel. Positional Repeatability.1² oefficient of Friction.3 typical onstruction luminum carriage, hardened steel crossed roller rail set with double v-grooved inner rail. SE MOUNTING IMENSIONS Finish lack anodized carriage, hardened steel base. h X d d d T L W R U L moment load ratings + load / life formulas. pg. 9 *Travel is 1/ distance from center in either direction. MOEL LPT-15 LPT-135 LPT-15 LPT-155 LPT-165 LPT-175 LPT-15 SERIES STINLE STEEL TRVEL* T.73 (1).79 (1).9 (5) 1.6 (3) 1.575 () 1.77 (5) 1.969 (5) LENGTH L.9 (5) 1.37 (35) 1.77 (5).165 (55).559 (65).953 (75) 3.37 (5) LO PITY LF (kgf) 5 (3) 7 (3) 13 (7) 11 (5) 13 (6) 16 (73) 173 (79). HOLES SE MOUNTING HOLES (OUNTERORE) SPING U.79 (1).9 (5) 1.96 (3) 1.9 ().165 (55).559 (65).953 (75) W.9 (5) 1.1 (9) 1. (31) 1.37 (35) 1.575 () RRIGE MOUNTING HOLES (THREE). HOLES 6 6 SPING M.79 (1) 1 1.1 () 1.7 () 1 1.11 ().7 () 1 1.11 () 1.11 () LPT-35 LPT-5 LPT-65 LPT- LPT-95 LPT-11 LPT-15.79 (1) 1.11 () 1.575 () 1.969 (5).363 (6) 6 (7) 3.15 () 1.37 (35) 1.969 (5).559 (65) 3.15 () 3.7 (95).3 (11).91 (15) () 13 (63) 165 (75) 9 (95) 31 (15) 6 (1) 6 (1).9 (5) 1.37 (35).165 (55) 6 (7) 3.37 (5) 3.7 (95).3 (11) 1.99 (33) 1.575 () 1.77 (5) 1.969 (5).165 (55) 6 6 1 1.1 () 1 1.693 (3) 1 1.11 () 1 1.77 (5) 1.11 () 1 1.77 (5) 1.77 (5) LPT-55 LPT- LPT-315 LPT-31 LPT-3155 LPT-31 LPT-35 1.11 () 1.77 (5).36 (6).953 (75) 3.53 (9).13 (15) 5.11 (1) Please specify () for Stainless Steel.165 (55) 3.15 ().13 (15) 5.11 (1) 6.1 (155) 7.7 (1).7 (5) 77 (16) (1) () 65 (75) 6 (31) 71 (355) 5 (375) 1.575 ().677 (6) 3.53 (9).5 (115) 5.51 (1) 6.96 (165) 7. (19) 1.693 (3).165 (55).559 (65) 3.7 (95) 3.36 (5) 3.53 (9) 6 6 1 1.575 () 1.56 (65) 1 1.969 (5) 1.953 (75) 1.969 (5) 1.953 (75).953 (75) 63
RRIGE SPING SERIES N P moment load ratings + load / life formulas. pg. 9 Mounting imensions THRE J EPTH K SPING R SE OUNTERORE d h LPT-15.13 (3.5).551 (1) -56.13 (3.5).13 (3.5).155 (3.9).11 (.6).1 (.5) LPT-135.13 (3.5).197 (5).1 (.5) LPT-15.9 (1.5).13 (3.5).1 (.5) LPT-155 LPT-165.9 (1.5).9 (1.5).13 (3.5).197 (5) ORE FOR -56.1 (.5).1 (.5) LPT-175.6 (.5).197 (5).1 (.5) LPT-15.9 (1.5).197 (5).1 (.5) LPT-35.13 (3.5).66 () 6-3.17 (5.5).197 (5).1 (6.1).157 ().15 (3.) LPT-5.13 (3.5).95 (7.5).15 (3.) LPT-65 LPT- LPT-95.69 (17.5).69 (17.5).69 (17.5).197 (5).197 (5).197 (5) ORE FOR 6-3.15(3.).15 (3.).15 (3.) LPT-11 1. (3.5).95 (7.5).15 (3.) LPT-15.69 (17.5).95 (7.5).15 (3.) LPT-55.95 (7.5) 1.11 () 1-3.95 (7.5).95 (7.5).37 (.3). (5.).5 (5.) LPT-.95 (7.5).36 (6).5 (5.) LPT-315 LPT-31 LPT-3155 1.3 (7.5) 1.3 (7.5) 1.3 (7.5).95 (7.5).95 (7.5).95 (7.5) ORE FOR 1-3.5 (5.).5 (5.).5 (5.) LPT-31.67 (5.5).95 (7.5).5 (5.) LPT-35 1.3 (7.5).95 (7.5).5 (5.) imensions in inches (mm) K X RRIGE MOUNTING IMENSIONS N M Profile imensions J SERIES HEIGHT ±. (.1) WITH ±. (.1) SE THIKNE SE WITH X P LPT-1.315 ().7 ().15 ().59 (6.6) K LPT-.7 (1) 1.11 ().36 (6).7 (1) LPT-.6 (16) 1.575 ().315 ().69 (16) imensions in inches (mm) 6
rossed Roller Rail Sets 6 Reasons to choose el-tron rossed Roller Rail Sets el-tron rossed Roller Rail Sets 1. Versatile- May be adapted to your own base and carriage design.. Rugged- Hardened steel v-grooved rails and rollers withstand heavy loads and impacts. 3. orrosion Resistant- series Stainless steel available from stock. High ccuracy- Parallelism of microns (.²) over inches. 5. Easy To Use- Standard threaded and counterbored mounting holes allow access from either side. 6. Interchangeable- Form, fit and functional replacement for other manufacturer s rossed Roller Linear earings are compact, precision bearings that can support and guide high loads with high accuracy and repeatability, low friction, and low starting force. complete range of sizes is supplied for use in precision machine tools, measuring instruments, assembly fixtures, medical instruments, and anywhere linear or reciprocating motion with high reliability and long life is required. onstruction Each bearing consists of a pair of hardened steel ways containing 9 vee grooves, and a row of alternately crossed cylindrical rollers. The hardened steel rollers are captive in a stainless steel cage for easy handling and assembly and permanent alignment. The ways are installed face to face by the user, with the rollers between the vee grooves. series Stainless Steel also available. pplication earings are normally supplied and installed in sets of two to form an assembly that can support their rated load in any direction or orientation, and can be preloaded to eliminate side play. Mounting and banking surfaces must be smooth and flat, and accurately parallel, coplanar, or perpendicular respectively to achieve maximum accuracy. Preload forces must be evenly distributed. irt and dust must be excluded. Lubrication required depends on the application, ranging from light grease or oil at the time of installation for low speeds (less that 5 inches/min.) and occasional movement to continuous oil bath or mist at 1 inches/min. 65
Ratings and Specifications Load ratings in the tables are dynamic ratings for each set. Ratings are based on theoretical data, proper installation, appropriate lubrication, and a predicted life of 1 million inches. Ratings are suggested only, based on standard and typical industry practice, and cannot be guaranteed. Life can be increased approximately 1 times by operating a given bearing at 1/ its rated load, other factors being constant. Temperature of bearings must not exceed 1 (1 F), even for short periods, since this will reduce hardness and result in significantly reduced load capacity and working life. URY The accuracy of a slide is measured along it s entire length, as illustrated in Fig, and expressed in terms of parallelism (Fig 1.) ctual accuracy achieved depends on proper installation. µm 1 parallelism V.W 6 high grade 6 1 1 rail length L mm Fig. 1 Fig. Mounting holes in the way bars are threaded, and also counterbored to alternatively permit using the next smaller size screw with threaded mounting holes in the user s components. 66
rossed Roller Rail Sets Ordering Order standard bearing sets from table by model number according to load and travel required Each set consists of two complete bearings ( rails, roller cages, and end stops). elivery stock to weeks. E G H d F + -.1" (-.3) S M M L M M moment load ratings + load / life formulas. pg. 9 *Travel is 1/ distance from center in either direction. MOEL N-1 N-1 N-1 N-15 N-16 N-17 N-1 STINLE STEEL. OF ROLLERS IN EH RETINER 5 7 1 13 16 19 1 LENGTH L.7 () 1.11 () 1.575 () 1.969 (5).36 (6) 6 (7) 3.15 () TRVEL* T.73 (1).7 () 1.63 (7) 1.6 (3) 1.57 (37) 1.65 () 1.969 (5). HOLES 3 5 6 7 RIL SET LO PITY L 61 11 1 167 1 MOEL N-35 N-35 N-375 N-3 N-335 N-335. OF ROLLERS IN EH RETINER 31 35 3 5 9 LENGTH L.5 (5) 9.3 (5) 1.7 (75) 11.11 () 1.795 (35) 13.7 (35) TRVEL* T 5.315 (135) 5.79 (15) 6.96 (165) 6.9 (175) 7.677 (195).71 (5). HOLES 9 1 11 1 13 1 RIL SET LO PITY L 6 77 36 9 99 1,7 N- N-5 N-6 N-75 N-9 N-15 N-1 N-135 N-15 N-165 N-1 5 11 13 16 1 1 3 6 9 3 1.11 () 1.77 (5).36 (6).953 (75) 3.5 (9).13 (15).75 (1) 5.315 (135) 5.96 (15) 6.96 (165) 7.7 (1).79 (1).95 () 1.11 () 1.73 () 1.969 (5).5 (6) 6 (7) 3.7 () 3.5 (9) 3.7 (95) 3.937 (1) 3 5 6 7 9 1 11 1 66 15 15 171 11 37 77 3 33 3 N- N-1 N-16 N- N- N- N-3 N-36 N- N- N- 7 11 15 19 3 7 31 35 39 3 7 3.15 ().75 (1) 6.99 (16) 7.7 () 9.9 () 11. () 1.59 (3) 1.173 (36) 15.7 () 17.33 () 1.9 ().3 (5) 3. ().13 (15) 5.11 (1) 5.95 (175) 6.9 (175) 7.7 ().5 (5) 9.3 (5) 1.6 (7) 11.61 (95) 3 5 6 7 9 1 11 1 66 36 1,1 1,1 1,36 1,5 1,716 1,9,6 N-5 N-75 N-31 N-315 N-315 N-3175 N-3 7 1 1 17 1 1.969 (5).953 (75) 3.937 (1).91 (15) 5.96 (15) 6.9 (175) 7.7 () 1.1 () 1.9 ().3 (5) 3.71 (7) 3.6 ().13 (15).5 (115) 3 5 6 7 15 37 6 5 616 N-61 N-615 N-6 N-65 N-6 N-635 N-6 1 16 3 3.937 (1) 5.96 (15) 7.7 () 9.3 (5) 11.11 () 13.7 (35) 15.7 ().165 (55) 3.36 (5).7 (1) 5.96 (15) 7.3 (15).65 (15) 9.66 (5) 3 5 6 7 7 1,56 1, 1,76,11,6,16 Please specify () for Stainless Steel 67
Profile imensions Mounting imensions SERIES S M E F* J** d G H N-1 N- N-3 N- N-6.335 (.5).73 (1).7 (1).66 () 1.1 (31).15 (.).36 (6.).315 (.).33 (11).591 (15).15 (3.9).17 (5.5).37 (.3). (1.).559 (1.).59 (1.5).79 (.).11 (3.).15 (.).36 (6.).59 (1.5).79 (.).79 (.).79 (.).11 (3.).3937 (1).591 (15).93 (5) 1.57 () 1.965 (5).79 (1.).9 (.5).137 (3.5).177 (.5).36 (6.) M M3 M M5 M6 # # # # #1.65 (1.65).1 (.55).1 (3.).169 (.3).5 (5.).11 (3.).173 (.).36 (6.).315 (.).37 (9.5).55 (1.).79 (.).1 (3.1).165 (.).5 (5.) *Thread Size **Hole F clears cap screw for through mounting. Modifying Length of Travel For a given length of bearing way, since there is no slip at any load, both length of travel and load capacity depend on the number of rollers and their pitch. The number of rollers supplied with each standard bearing set provides a travel distance of approximately 6% of the way length (see page 56). In some cases (e.g., when mounting space is restricted) it may be practical to increase travel at the expense of load capacity by removing one or more rollers instead of selecting a longer bearing. Since travel extends symmetrically around the mean position, the travel increase is twice the pitch for each roller removed. Similarly, the load capacity for the set (page 56) is reduced by twice the load capacity per roller. P Pitch ROLLER SIZE ROLLER IMETER () in (mm) ROLLER ISTNE (P) in (mm) INRESE OF TRVEL FOR EH ROLLER UT-OFF in (mm) ROLLER LO RRYING P. PER ROLLER lbs (kg) N-1.59 (1.5).9 (.5).197 (5). () N-.79 ().15 ().316 () 13. (6) N-3.11 (3).197 (5).39 (1) (1) N-.15 ().75 (7).55 (1) () N-6.36 (6).33 (.5).66 (17) () 6
nti-reep rossed Roller Rail Sets 6 Reasons to choose el-tron nti-reep rossed Roller Rail Sets 1. esigned for vertical applications and cantilevered loads.. Rugged- Hardened steel V-grooved rails and rollers withstand heavy loads. 3. Versatile- May be integrated into your own design.. High ccuracy- Parallelism of 3 microns (.1") over inches. 5. Easy to use- Standard threaded and counterbored mounting holes allow access from either side. el-tron nti-reep rossed Roller Rail Sets The nti-reep crossed roller rail system is based on a new concept to prevent roller cage slippage during operation. This system allows you to mount the rail set in any orientation while maintaining direct roller contact to the rail surface eliminating roller cage creep. This system is ideal for vertical applications and where high acceleration and deceleration forces are present. onstruction Each bearing set contains four V-grooved Rails, eight end screws, and two nti-reep crossed roller retainers. The nti-reep crossed roller retainers utilize a studded roller and detented rail to prevent the migration of the retainer due to vertical and cantilevered load applications. pplication earings are normally supplied and installed in sets of two to form an assembly that can support their rated load in any direction or orientation, and can be preloaded to eliminate side play. Mounting and banking surfaces must be smooth and flat, and accurately parallel, coplanar, or perpendicular respectively to achieve maximum accuracy. Preload forces must be evenly distributed. irt and dust must be excluded. Lubrication required depends on the application, ranging from light grease or oil at the time of installation for low speeds (less that 5 inches/min.) and occasional movement to continuous oil bath or mist at 1 inches/min. 6. Interchangeable- Form, fit and functional replacement for other manufacturer's Rail sets. 69
RTINGS N SPEIFITIONS Load ratings in the tables are dynamic ratings for each set. Ratings are based on theoretical data, proper installation, appropriate lubrication, and a predicted life of 1 million inches. Ratings are suggested only, based on standard and typical industry practice, and cannot be guaranteed. Life can be increased approximately 1 times by operating a given bearing at 1/ its rated load, other factors being constant. Temperature of bearings must not exceed (1 F), even for short periods, since this will reduce hardness and result in significantly reduced load capacity and working life. URY The accuracy of a slide is measured along it s entire length, as illustrated in Fig, and expressed in terms of parallelism (Fig 1.) ctual accuracy achieved depends on proper installation. Fig. 1 Fig. Mounting holes in the way bars are threaded, and also counterbored to alternatively permit using the next smaller size screw with threaded mounting holes in the user s components. INSTLLTION PROEURE Note: * Provide external mechanical stoppers. * Set the movement to be less than the specified stroke. (1) Remove burrs, scratches, and dust from the rail mounting surface of the table and bed, and be careful to prevent contamination during assembly. () pply low-viscosity oil to the contact surfaces, and align the table and the bed. (Figure 1a) (3) Set the reference surface shown in Figure onto the mounting surface with the rails assembled. Set the table in the center position, and tighten the adjustment screws lightly so that almost no gap remains. (Figure 1b) () Keep the table in the center, tighten the rail mounting bolts lightly, loosen the end pieces of both end faces, and remove the fastening plate. Following this, firmly retighten the end pieces. (5) While maintaining the conditions of (), gently move the assembly through its stroke being certain to check that the speci.ed stroke length has been secured, and that there is no problem with the operation, or any other irregularity. (6) Move the table to the center and tighten only the adjustment screws on the R-retainer with the recommended tightening torque as shown in Table 3. (Figure 1c) (7) Gently move the table to one stroke end, and check that the table has surely come into contact with the external mechanical stopper. Following this, tighten the adjustment screws on the R-retainer in the same manner as (6). (Figure 1d) () Move the table to the opposite stroke end, and tighten in the same manner as (6). (Figure 1e) (9) Fasten the mounting bolts on rails 1,, and 3 by tightening with the recommended torque shown in Table. (Figure 1f) (1) Set the dial indicators to the center of the table and to the side (reference surface) of the table. (Figure 1g) (11) Perform the final preload adjustment. While moving the table back and forth, repeat steps (6) and (7) until the dial indicators show a minimum deviation. (1) Finally, securely fasten rail, which has been provisionally mounted, using the recommended torque. s with the adjustment screws, successively tighten the mounting bolts on the R-retainer while 7 moving the table.
nti-reep rossed Roller Rail Sets Ordering Order standard bearing sets from table by model number according to load and travel required Each set consists of two complete bearings ( rails, roller cages, and end stops). elivery stock to weeks. E G H *Travel is 1/ distance from center in either direction. MOEL. OF ROLLERS IN EH RETINER d F LENGTH L + -.1" (-.3) TRVEL* T S. HOLES M RIL SET LO PITY L M MOEL L M. OF ROLLERS IN EH RETINER LENGTH L M moment load ratings + load / life formulas. pg. 9 TRVEL* T. HOLES RIL SET LO PITY L N-- N-5- N-6- N-75- N-9- N-15- N-1- N-135- N-15- N-165- N-1- N-5- N-75- N-31- N-315- N-315- N-3175- N-3-5 9 15 19 3 7 33 39 1 7 51 9 13 19 3 9 35 1 1.11 () 1.77 (5).36 (6).953 (75) 3.5 (9).13 (15).75 (1) 5.315 (135) 5.96 (15) 6.96 (165) 7.7 (1) 1.969 (5).953 (75) 3.937 (1).91 (15) 5.96 (15) 6.9 (175) 7.7 ().79 (1).9 (5) 1.11 () 1.57 () 1.969 (5).559 (65) 6 (7) 3.19 () 3.5 (9) 3.7 (95) 3.937 (1).9 (5) 1.9 ().36 (6) 3.67 (3) 3.53 (9).55 (13). (113) 3 5 6 7 9 1 11 1 3 5 6 7 66 15 15 171 11 37 77 3 33 3 15 37 6 5 616 N-35- N-- N-1- N-16- N-- N-- N-- N-61- N-615- N-6- N-65- N-6- N-635- N-6-3 9 17 3 9 37 3 9 15 19 5 31 35 39.5 (5) 3.15 ().75 (1) 6.99 (16) 7.7 () 9.9 () 11. () 3.937 (1) 5.96 (15) 7.7 () 9.3 (5) 11.11 () 13.7 (35) 15.7 () 5.95 (15).36 (6).95 (75).13 (15) 5.11 (1) 6.69 (13) 6.69 (17).165 (63) 3.36 (5) 5.31 (135) 6. (15) 7.6 (1) 9.55 () 1.3 (75) 9 3 5 6 7 3 5 6 7 6 66 36 1,1 1,1 7 1,56 1, 1,76,11,6,16 Profile imensions Mounting imensions SERIES S M E F* J** d G H N-- N-3- N-- N-6- *Thread Size.73 (1).7 (1).66 () 1.1 (31).36 (6.).315 (.).33 (11).591 (15).17 (5.5).37 (.3). (1.).559 (1.).79 (.).11 (3.).15 (.).36 (6.).79 (.).79 (.).79 (.).11 (3.).591 (15).93 (5) 1.57 () 1.965 (5).9 (.5).137 (3.5).177 (.5).36 (6.) M3 M M5 M6 # # # #1.1 (.55).1 (3.).169 (.3).5 (5.).173 (.).36 (6.).315 (.).37 (9.5).79 (.).1 (3.1).165 (.).5 (5.) **Hole F clears cap screw for through mounting. 71
rossed Roller Slide Tables (luminum) 6 Reasons to choose el-tron rossed Roller Slide Tables (luminum) 1. High accuracy and load capacity. Precision ground V grooved ways and rollers.. Withstands force in any direction. lternately crossed rollers 5 angle. 3. Easy installation. Threaded mounting holes in standard pattern.. series Stainless steel models available. (Rails only) el-tron rossed Roller Slide Tables Our Gold Motion Series crossed roller slide tables offer low cost and lightweight aluminum body construction to support heavy loads with low friction and precision linear motion. Select from over 5 standard sizes for use in a wide range of applications - precision instruments, office and communications equipment, surface grinders, tool grinders, and assembly fixtures, as examples. Factory assembled and ready to install, each positioning table consists of an aluminum base and an aluminum carriage, both precision milled, and a pair of hardened steel linear bearings. ounterbored clearance holes, in base, permit easy mounting. Threaded holes, closely spaced in carriage, permit attaching your components without additional machining. Factory preloaded bearings eliminate side play. Internal stops, in the form of projecting screw heads between the underside of the carriage and base, protect bearings from over travel during handling. Mount on flat surfaces to provide full support to the base. Loads stated, may be applied in any direction. Load values are calculated for weights evenly distributed on your positioning table. For full life of tables, we recommend careful calculation of moments and cantilevered loads. 5. Lightweight aluminum base and carriage. 6. Interchangeable with other manufacturer s slides. 7
rossed Roller Slide Tables (luminum) series Stainless Steel Models vailable For applications where particulate contamination caused by corrosion must be reduced, el-tron offers Gold Motion crossed roller slide tables equipped with corrosion-resistant, stainless steel, crossed roller linear bearings. TO ORER: dd to model number before. For example: NT-5 moment load ratings + load / life formulas. pg. 99 *Travel is 1/ distance from center in either direction. MOEL STINLE STEEL TRVEL* T LENGTH L LO PITY LF (kgf). HOLES SE MOUNTING HOLES (OUNTERORE) U SPING W RRIGE MOUNTING HOLES (THREE). HOLES SPING M NT-15 NT-165 NT-1 NT-195 NT-115..5 3. 1.969 (5).559 (65) 3.15 () 3.7 (95).91 (15) 95 (3) 113 (51) 1 (65) 161 (73) 197 (9) 1.575 ().165 (55) 6 (7) 3.36 (5).5 (115) 1.575 ().165 (55) 3.36 (5) 6 1 1 1 x.596 (15) x.596 (15) 3 x.596 (15) x.596 (15) 6 x.596 (15) NT-35-1 NT-5 NT-5- NT-65 NT-65- NT--5 NT- NT-95-6 NT-95 NT-11-7 NT-15 NT-15- NT-155-1 NT-15-1.71 1.1 1.5 1.97..36.5.76 3. 3.15 3.9.7 1.37 (35) 1.969 (5) 1.969 (5).559 (65).559 (65) 3.15 () 3.15 () 3.7 (95) 3.7 (95).331 (11).91 (15).91 (15) 6.1 (155) 7.3 (15) 66 () 96 () 96 () 11 (5) 11 (5) 15 (66) 15 (66) 16 (7) 16 (7) 17 (5) 19 (9) 19 (9) 317 (1) 33 (17).9 (5) 1.575 () 1.575 ().165 (55).165 (55) 6 (7) 6 (7) 3.36 (5) 3.36 (5) 3.937 (1).5 (115).5 (115) 5.7 (15) 6.9 (175) 1.575 () 1.575 ().165 (55).165 (55) 6 (7) 3.36 (5) 3.36 (5).57 (115) 5.7 (15) 6 6 1 1 1 1 1 1 1 x.596 (15) 1 x.596 (15) x.596 (15) x.596 (15) 3 x.596 (15) 3 x.596 (15) x.596 (15) x.596 (15) 5 x.596 (15) 6 x.596 (15) 6 x.596 (15) x.596 (15) 1 x.596 (15) NT-55 NT-55- NT--5 NT-315 NT-315-6 NT-31-75 NT-3155 NT-3155-9 NT-31 NT-31-15 NT-35 NT-35-1 NT-3-155 NT-355-1 NT-3-5 NT-35-1.1 1.77..36.95 3. 3.5..13 5. 5.1 6.1 7.9.7 9.6.165 (55).165 (55) 3.15 ().13 (15).13 (15) 5.11 (1) 6.1 (155) 6.1 (155) 7.7 (1) 7.7 (1).71 (5).71 (5) 9.55 () 1.39 (55) 11. () 1. (5) 193 () 193 () (1) 33 (15) 33 (15) 37 (17) 77 (17) 77 (17) 55 () 55 () 576 (6) 576 (6) 63 (9) 6 (31) 7 () 79 (36) 1.37 (35) 1.37 (35).36 (6) 3.35 (5) 3.35 (5).3 (11) 5.315 (135) 5.315 (135) 6.99 (16) 6.99 (16) 7.3 (15) 7.3 (15).67 (1) 9.51 (35) 1.36 (6) 11. (5) 3.36 (5) 3.36 (5). (11) 5.31 (135) 6.99 (16) 7.3 (15) 6 6 1 1 1 1 1 1 16 1 1 x.93 (5) x.93 (5) x.93 (5) 3 x.93 (5) x.93 (5) x.93 (5) 5 x.93 (5) 5 x.93 (5) 6 x.93 (5) 6 x.93 (5) 7 x.93 (5) x.93 (5) 9 x.93 (5) 1 x.93 (5) NT-5 NT-15 NT-165 NT-5 NT-5. 3.. 5. 6. 3.36 (5).91 (15) 6.96 (165).71 (5) 9.66 (5) (196) 6 (73) 73 (39) 7 (395) 116 (6).559 (65).13 (15) 5.79 (15) 7.3 (15).5 (5) 6 1 1 x 1.575 () x 1.575 () 3 x 1.575 () x 1.575 () NT-611 NT-616 NT-66 NT-636 3.. 6. 9..331 (11) 6. (16) 1. (6) 1.17 (36) 616 () 16 (3) 16 (7) 3 (9) 3.53 (9) 5.51 (1) 9.9 () 13.39 () 5.51 (1) 1 1 x 1.969 (5) 3 x 1.969 (5) 5 x 1.969 (5) 73
Mounting imensions RRIGE SE SPING THRE EPTH SPING OUNTERORE SERIES N P J K R S d h NT-1 NT- NT- NT- NT-6.69 (17.5).69 (17.5) 1.3 (7.5) 1.673 (.5).165 (55) imensions in inches (mm).39 (1).591 (15).9 (5) 1.575 () 1.969 (5) - 6-3 1-3 1-3 1/-.177 (.5).315 ().13 (1.5).51 (13).6 (16).197 (5).197 (5).39 (1).39 (1).39 (1).66 () 1.11 () 1.575 ().165 (55).36 (6) RRIGE MOUNTING IMENSIONS.19 (5).1 (6.1).3 (.3).3 (.3).6 (1.3).15 (3.1).19 (3.7).197 (5).197 (5).66 (6.7).15 (3.).15 (3.7).5 (5.).5 (5.).315 (.) Specifications: Straight Line ccuracy.1²/inch of travel Positional Repeatability.1² oefficient of Friction.3 typical onstruction luminum carriage and base, hardened steel crossed roller rail sets. Series Rail Sets available. Finish arriage: Gold anodize, ase: lack anodize Ordering Order standard slide tables from table by model number according to load and travel required. K N M elivery stock to 6 weeks. J P SE MOUNTING IMENSIONS S Profile imensions SERIES NT-1 HEIGHT ±.5 (.13).59 (15) WITH ±.1 (.5) 1.11 () SE THIKNE.16 (.1) d h R W U NT-.7 (1) 1.575 ().56 (6.5) NT- 1.1 ().36 (6).35 (9) NT- 1.37 (35) 3.15 ().13 (1.5) NT-6 1.77 (5) 3.937 (1).51 (13) imensions in inches (mm) T L 7
nti-reep rossed Roller Slide Tables (luminum) 6 Reasons to choose el-tron nti-reeprossed Roller Slide Tables (luminum) 1. nti-reep rossed Roller Technology. Ideal for vertical and cantilevered load applications.. High accuracy and load capacity. Precision V grooved rails and rollers. 3. Lightweight aluminum carriage and base design.. Withstands force in any direction. lternately crossed roller cage design. 5. Easy installation. Threaded and counterbored mounting holes in standard pattern. el-tron nti-reep rossed Roller Slide Tables The nti-reep crossed roller slide tables utilize our nti-reep crossed roller rail systems to prevent roller cage slippage during operation. This system allows you to mount the table in any orientation while maintaining direct roller contact to the rail surface eliminating roller cage creep. These tables are ideal for vertical applications and where high acceleration and deceleration forces are present. Factory assembled and ready to install, each positioning table consists of an aluminum base and an aluminum carriage, both precision milled, and a pair of hardened steel linear bearings. ounterbored clearance holes, in base, permit easy mounting. Threaded holes, closely spaced in carriage, permit attaching your components without additional machining. Factory preloaded bearings eliminate side play. Internal stops, in the form of projecting screw heads between the underside of the carriage and base, protect bearings from over travel during handling. Mount on flat surfaces to provide full support to the base. Loads stated, may be applied in any direction. Load values are calculated for weights evenly distributed on your positioning table. For full life of tables, we recommend careful calculation of moments and cantilevered loads. 6. Interchangeable with other manufacturer's slides. 75
nti-reep rossed Roller Slide Tables (luminum) moment load ratings + load / life formulas. pg.99 *Travel is 1/ distance from center in either direction. MOEL TRVEL* T (mm) LENGTH L LO PITY LF (kgf). HOLES SE MOUNTING HOLES (OUNTERORE) U SPING W RRIGE MOUNTING HOLES (THREE). HOLES SPING M NT-15- NT-165- NT-1- NT-195- NT-115-.9 (5) 1.1 () 1.57 () 1.96 (5) (7) 1.969 (5).559 (65) 3.15 () 3.7 (95).91 (15) 95 (3) 113 (51) 1 (65) 161 (73) 197 (9) 1.575 ().165 (55) 6 (7) 3.36 (5).5 (115) 1.575 ().165 (55) 3.36 (5) 6 1 1 1 x.596 (15) x.596 (15) 3 x.596 (15) x.596 (15) 6 x.596 (15) NT-35-1- NT-5- NT-65- NT-- NT-95- NT-11-7- NT-15- NT-155-1- NT-15-1-.71 (1).9 (5) 1.1 () 1.57 () 1.96 (5).56 (65) (7) 3.5 (9) 3.93 (1) 1.37 (35) 1.969 (5).559 (65) 3.15 () 3.7 (95).331 (11).91 (15) 6.1 (155) 7.3 (15) 66 () 96 () 11 (5) 15 (66) 16 (7) 17 (5) 19 (9) 317 (1) 33 (17).9 (5) 1.575 ().165 (55) 6 (7) 3.36 (5) 3.937 (1).5 (115) 5.7 (15) 6.9 (175).165 (55) 6 (7) 3.36 (5).57 (115) 5.7 (15) 6 1 1 1 1 1 x.596 (15) x.596 (15) 3 x.596 (15) x.596 (15) 5 x.596 (15) 6 x.596 (15) x.596 (15) 1 x.596 (15) NT-55- NT--5- NT-315- NT-31-75- NT-3155- NT-31- NT-35- NT-3-155-.9 (5) 1.9 ().36 (6) 3.7 (3) 3.5 (9).5 (13).5 (113) 5.9 (15).165 (55) 3.15 ().13 (15) 5.11 (1) 6.1 (155) 7.7 (1).71 (5) 9.55 () 193 () (1) 33 (15) 37 (17) 77 (17) 55 () 576 (6) 63 (9) 1.37 (35).36 (6) 3.35 (5).3 (11) 5.315 (135) 6.99 (16) 7.3 (15).67 (1) 3.36 (5). (11) 6 1 1 1 16 1 x.93 (5) x.93 (5) 3 x.93 (5) x.93 (5) 5 x.93 (5) 6 x.93 (5) 7 x.93 (5) NT-5- NT-15- NT-165- NT-5- NT-5-.36 (6).95 (75).13 (15) 5.1 (1) 5.63 (13) 3.36 (5).91 (15) 6.96 (165).71 (5) 9.66 (5) (196) 6 (73) 73 (39) 7 (395) 116 (6).559 (65).13 (15) 5.79 (15) 7.3 (15).5 (5) 6 1 1 x 1.575 () x 1.575 () 3 x 1.575 () x 1.575 () NT-611- NT-616- NT-66- NT-636-. (63) 3.35 (5) 6. (15) 9.6 ().331 (11) 6. (16) 1. (6) 1.17 (36) 616 () 16 (3) 16 (7) 3 (9) 3.53 (9) 5.51 (1) 9.9 () 13.39 () 5.51 (1) 1 1 x 1.969 (5) 3 x 1.969 (5) 5 x 1.969 (5) 76
Mounting imensions RRIGE SE SPING THRE EPTH SPING OUNTERORE SERIES N P J K R S d h NT-1- NT-- NT-- NT-- NT-6-.69 (17.5).69 (17.5) 1.3 (7.5) 1.673 (.5).165 (55) imensions in inches (mm) K.39 (1).591 (15).9 (5) 1.575 () 1.969 (5) - 6-3 1-3 1-3 1/-.177 (.5).315 ().13 (1.5).51 (13).6 (16).197 (5).197 (5).39 (1).39 (1).39 (1).66 () 1.11 () 1.575 ().165 (55).36 (6) RRIGE MOUNTING IMENSIONS N M.19 (5).1 (6.1).3 (.3).3 (.3).6 (1.3).15 (3.1).19 (3.7).197 (5).197 (5).66 (6.7).15 (3.).15 (3.7).5 (5.).5 (5.).315 (.) Specifications: Straight Line ccuracy.1²/inch of travel Positional Repeatability.1² oefficient of Friction.3 typical onstruction luminum carriage and base, hardened steel crossed roller rail sets. Finish arriage: Gold anodize, ase: lack anodize Ordering Order standard slide tables from table by model number according to load and travel required. elivery stock to 6 weeks. J P SE MOUNTING IMENSIONS S Profile imensions SERIES NT-1- HEIGHT ±.5 (.13).59 (15) WITH ±.1 (.5) 1.11 () SE THIKNE.16 (.1) d h R W U NT--.7 (1) 1.575 ().56 (6.5) NT-- 1.1 ().36 (6).35 (9) NT-- 1.37 (35) 3.15 ().13 (1.5) NT-6-1.77 (5) 3.937 (1).51 (13) imensions in inches (mm) T L 77
Inch Series rossed Roller Slide Tables NT Type This series of crossed roller tables offers the designer robust slide tables made to the same standards as our NT series but with inch type overall dimensions. Each cross section is designated by its width ², 3², and ². This series is interchangeable with those of other manufacturer s tables and is available from stock at competitive prices. series Stainless Steel Models vailable For applications where particulate contamination caused by corrosion must be reduced, el-tron offers crossed roller slide tables equipped with corrosionresistant, stainless steel, crossed roller linear bearings. ase & carriage: aluminum Rails, rollers, retainers & fasteners: stainless steel TO ORER: dd to model number. For example: NT-1 moment load ratings + load / life formulas. pg. 99 *Travel is 1/ distance from center in either direction. MOEL STINLE STEEL TRVEL* T LENGTH L LO PITY LF (kgf). HOLES SE MOUNTING HOLES (OUNTERORE) SPING U W RRIGE MOUNTING HOLES (THREE). HOLES SPING M NT-1 NT-3 NT-3 NT-5 NT-65 NT-76 NT-7 NT-9 NT-19 NT-111 NT-111 1 3 5 6 7 9 1 11 3 5 6 7 9 1 11 1 15 (7) 19 (9) 6 (1) (1) 37 (17) 1 (19) 6 (1) 5 () 57 (59) 63 (9) 6 (9). 3.. 5. 6. 7.. 9. 1. 1 5. 6. 7.. 9. 6 1 1 1 16 1 entered 1 x x 3 x x 5 x 6 x 7 x x 9 x 1 x NT-33 NT-33 NT-35 NT-365 NT-376 NT-37 NT-39 NT-319 NT-3111 NT-3111 3 5 6 7 9 1 11 3 5 6 7 9 1 11 1 19 (9) 6 (1) (1) 37 (17) 1 (19) 6 (1) 5 () 57 (59) 63 (9) 6 (9). 3.. 5. 6. 7.. 9. 1. 1 5. 6. 7.. 9. 6 1 1 1 16 1 1 x x 3 x x 5 x 6 x 7 x x 9 x 1 x NT-3 NT-65 NT-7 NT-19 NT-111 NT-113 NT-1615 3 5 7 9 11 13 15 6 1 1 1 16 5 () 79 (359) 156 (79) 13 (599) 15 (719) 1 (3) (91) 3. 5. 7. 9. 1 13. 15. 5. 7. 9. 1 13. 6 1 1 1 6 x x 6 x x 1 x 1 x 1 x 7
SERIES NT- Profile imensions HEIGHT ±.5.9 WITH ±.1. SE THIKNE.5 Specifications: Straight Line ccuracy.1²/inch of travel Positional Repeatability.1² NT-3 1 3..5 oefficient of Friction.3 typical NT- 1...5 onstruction luminum carriage and base, hardened steel crossed roller rail sets. series stainless steel available. Finish arriage: lear anodize, ase: lear anodize Ordering Order standard slide tables from table by model number according to load and travel required. elivery stock to 6 weeks. Mounting imensions RRIGE SE SPING THRE EPTH SPING OUNTERORE Screw SERIES N P J K R S d h Size NT- 5 #-3.3.96.75.15.17 # NT-3 5 1 #1-3.3.96.3..5 #1 NT- 5 1 1/-.37.96 3.6.1.31 #1/ K RRIGE MOUNTING IMENSIONS N M SE MOUNTING IMENSIONS J P S d h R W U T L 79
rossed Roller Slide Tables (Steel) 6 Reasons to choose el-tron rossed Roller Slide Tables (Steel) rossed Roller Slide Tables rossed Roller Slide Tables are factory assembled, and ready to install. They use el-tron crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load. selection of more than standard sizes is available for applications including precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures, and anywhere precise linear positioning is required. onstruction Each slide table consists of a one piece base, a one piece carriage, and a pair of linear bearings. The bearings are factory preloaded to eliminate side play. ounterbored clearance holes in the base permit easy mounting in your structure. Threaded holes in the carriage are closely spaced to permit attaching your components without additional machining in most cases. Standard material for base and carriage is cold rolled steel, with black oxide finish. 1. High ccuracy -.² parallelism.. High Load apacity - rossed roller way construction handles loads up to,6 lb. 3. Interchangeable with other manufacturer s tables.. Low Friction -.3 coefficient of friction for smooth operation. 5. Standard Mounting - Holes provided. 6. acklash Free - Factory preloaded for minimum axial play. pplication Mount on a flat surface to provide full support to the base. lthough it is seldom needed, the carriage surface can be machined or additional mounting holes can be added if the following precautions are observed: 1. o not disassemble the table since reassembly and readjustment of the preloading require special procedures.. Protect the ways against entry of chips and debris. 3. rill only blind holes through the carriage to avoid depositing chips inside the unit.. void intersection with internal mounting or preloading screws. 5. void clamping forces in excess of the rated load capacity. Internal stops, in the form of projecting screw heads between the under side of the carriage and the base, are intended only to protect the bearings from over travel during handling. Provide separate stops appropriate for your load if needed. The ends of the carriage contain tapped holes that permit easy attachment of way covers, bellows, or other shields to exclude dust and keep the ways clean.
rossed Roller Slide Tables (Steel) T L O moment load ratings + load / life formulas. pg. 1 *Travel is 1/ distance from center in either direction. MOEL TRVEL* T LENGTH L LO PITY LF (kgf) SE MOUNTING HOLES (OUNTERORE) SPING. HOLES U V W X Y RRIGE MOUNTING HOLES (THREE). HOLES SPING M NT-15 NT-135 NT-15 NT-155 NT-165 NT-175 NT-15.7 (1).79 (1).9 (5) 1.6 (3) 1.575 () 1.77 (5) 1.969 (5).9 (5) 1.37 (35) 1.77 (5).165 (55).559 (65).953 (75) 3.36 (5) 6 (1) 35 (16) () 57 (6) 7 (3) 79 (36) ().79 (1) 1.1 () 1.96 (3) 1.9 ().3 (5).677 (6) 3.71 (7) 1.1 () 1.96 (3) 1.9 ().3 (5) 6 1 1 1 1.3937 (1).3937 (1) 3.3937 (1).3937 (1) 5.3937 (1) 6.3937 (1) NT-35 NT-5 NT-65 NT- NT-95 NT-11 NT-15 NT-1 NT-155 NT-17 NT-15.79 (1) 1.11 () 1.575 () 1.969 (5).36 (6) 6 (7) 3.15 () 3.53 (9) 3.937 (1).331 (11).7 (1) 1.37 (35) 1.969 (5).559 (65) 3.15 () 3.7 (95).331 (11).91 (15) 5.51 (1) 6.1 (155) 6.693 (17) 7.3 (15) () 137 (63) 165 (75) 9 (95) 31 (15) 6 (1) 6 (1) 319 (15) 31 (155) 37 (17) 396 (1) 1 1 1 16.9 (5) 1.575 ().165 (55) 6 (7) 3.36 (5) 3.937 (1).5 (115) 5.11 (1) 5.79 (15) 6.99 (16) 6.9 (175) 1.575 ().165 (55) 6 (7) 3.36 (5) 3.937 (1).5 (115) 5.11 (1) 5.79 (15) 6 (7) 3.36 (5) 3.937 (1).5 (115) 6 1 1 1 16 1 1.596 (15).596 (15) 3.596 (15).596 (15) 5.596 (15) 6.596 (15) 7.596 (15).596 (15) 9.596 (15) 1.596 (15) NT-55 NT- NT-315 NT-31 NT-3155 NT-31 NT-35 NT-3 NT-355 NT-3 NT-35 1.11 () 1.77 (5).36 (6).953 (75) 3.53 (9).13 (15) 5.11 (1) 6.1 (155) 7.7 (1).71 (5) 9.55 ().165 (55) 3.15 ().13 (15) 5.11 (1) 6.1 (155) 7.7 (1).71 (5) 9.55 () 1. (55) 11. () 1.1 (5) 77 (16) 5 (1) () 65 (75) 6 (31) 71 (355) 5 (375) 9 () 99 (5) 17 (9) 11 (5) 6 6 1 1 1 1 1 1.37 (35).36 (6) 3.35 (5).331 (11) 5.315 (135) 6.66 (16) 7.3 (15).6 (1) 9.5 (35) 1. (6) 11. (5) 3.36 (5).331 (11) 5.315 (135) 6.99 (16) 7.3 (15).6 (1) 9.5 (35) 3.36 (5).331 (11) 5.315 (135) 6.99 (16) 7.3 (15).331 (11) 5.315 (135) 6 1 1 1 16 1 1.93 (5).93 (5) 3.93 (5).93 (5) 5.93 (5) 6.93 (5) 7.93 (5).93 (5) 9.93 (5) 1.93 (5) NT-5 NT-15 NT-165 NT-5 NT-5 NT-5 NT-35 1.969 (5).953 (75).13 (15) 5.11 (1) 6.1 (155) 7.3 (15).6 (1) 3.36 (5).91 (15) 6.96 (165).71 (5) 9.66 (5) 11. (5) 1. (35) 616 () 5 (39) 13 (7) 13 (565) 15 (66) 1639 (75) 16 () 6 6 1 1.559 (65).13 (15) 5.79 (15) 7.3 (15).5 (5) 1.3 (65) 1.1 (5).13 (15) 5.79 (15) 7.3 (15) 1. (5).13 (15) 5.79 (15) 6 1 1 1 1 1.575 () 1.575 () 3 1.575 () 1.575 () 5 1.575 () 6 1.575 () NT-611 NT-616 NT-61 NT-66 NT-631.36 (6) 3.7 (95) 5.11 (1) 6.96 (165) 7.7 ().331 (11) 6. (16).6 (1) 1. (6) 1. (31) () 151 (69) 191 (7) (1) 6 (1) 6 6 6 3.53 (9) 5.51 (1) 7. (19) 9.9 () 11. (9) 3.53 (9) 5.51 (1) 7. (19) 6 1 1 1.969 (5) 1.969 (5) 3 1.969 (5) 1.969 (5) 1
rossed Roller Slide Tables (steel) im. in inches (mm) URY PRT # VERTIL HORIZONTL NT-15 NT-135 NT-15 NT-155 NT-165 NT-175 NT-15 NT-35 NT-5 NT-65 NT- NT-95 NT-11 NT-15 NT-1 NT-155 NT-17 NT-15.............1.1.1.1.1.1 () () () () () () () () () () () () (3) (3) (3) (3) (3) (3).16.16.16.....16.16......... () () () (5) (5) (5) (5) () () (5) (5) (5) (6) (6) (6) (6) (7) (7) ccuracy Top and bottom mounting surfaces and carriage side surfaces are ground flat and parallel to the line of motion. ccuracy of movement (V) is measured as a deflection over the center line of the carriage as shown. ccuracies, measured without load, depend primarily on overall length as listed. eflections (H) measured at either side of the carriage under the same conditions. Ordering Order standard positioning tables from table by model number according to load and travel required. elivery stock to 6 weeks. NT-55 NT- NT-315 NT-31 NT-3155 NT-31 NT-35 NT-3 NT-355 NT-3 NT-35...1.1.1.1.1.1.1.1.1 () () (3) (3) (3) (3) (3) (3) (3) (3) (3)........... (5) (5) (6) (6) (6) (7) (7) (7) (7) (7) (7) V NT-5 NT-15 NT-165 NT-5 NT-5 NT-5 NT-35..1.1.1.1.1.16 () (3) (3) (3) (3) (3) ().......31 (5) (6) (7) (7) (7) (7) () H NT-611 NT-616 NT-61 NT-66 NT-631.1.1.1.1.1 (3) (3) (3) (3) (3)..... (6) (6) (7) (7) (7)
rossed Roller Slide Tables (Steel) Load Ratings See Ratings and Specifications page 93 The load capacities stated in the tables may be applied in any direction, and are assumed to be centered and evenly distributed over the table. alculate moments and cantilevered loads carefully since inadvertent overloading will reduce service life. NT-1 NT- NT- NT- NT-6.9 (1.5).69 (17.5) 1.3 (7.5) 1.673 (.5).165 (55).39 (1).591 (15).9 (5) 1.575 () 1.969 (5) Mounting imensions RRIGE SPING THRE EPTH SPING ORE EPTH SERIES N P J K R S d h M M3 M M5 M6.36 (6).76 (7).37 (9.5).51 (13).551 (1).13 (3.5).197 (5).39 (1).39 (1).39 (1).66 () 1.11 () 1.575 ().165 (55).36 (6) SE.161 (.5).36 (6.5).95 ().37 (1).33 (11.5).1 (.55).13 (3.5).177 (.5).17 (5.5).76 (7).1 (.5).13 (3.5).177 (.5).13 (5.).76 (7.) imensions in inches (mm) K N M J P RRIGE MOUNTING IMENSIONS V X G S F d h R Y W U SE MOUNTING IRETIONS H O E SERIES * HEIGHT ±. (.1) WITH ** ±. (.1) Profile imensions UST OVER TTHMENT FLNGE HOLES THRE HEIGHT O E F G H NT-1 NT- NT- NT- NT-6.669 (17).7 (1) 1.1 () 1.37 (35) 1.77 (5) 1.11 () 1.575 ().36 (6) 3.15 () 3.937 (1).17 (5.5).56 (6.5).35 (9).13 (1.5).51 (13).9 (.5).13 (3.).17 (5.5).56 (6.5).315 ().591 (15).7 (1).6 (16) 1.575 ().165 (55).36 (6) 3.6 (9) M M M3 M3 M imensions in inches (mm) * Series NT-1 Tables use series N-1 bearings etc. ** Except Series NT-1 and NT- +. (+.).16 (.) 3
Recirculating all Slide Guides (SG) 6 Reasons to choose el-tron Recirculating all Slide Guides (SG) Recirculating all Slide Guides (SG) The SG type consists of a block and a guide rail, both having two R-shape raceway grooves machined by precision grinding. The block consists of a main body having raceway grooves and a resin return cap ensuring smooth circulation of balls. These precision steel balls roll in the respective raceway groove with contact at four points. Smooth and Stable operation. Since precision steel balls are used as rolling elements, the rolling resistance is extremely small, ensuring smooth and stable operation. ompact, lightweight, and low price. The block is a simple structure, so the slide guide is compact and inexpensive. Its compactness and light weight also make this product optimum for linear operation at high speed. 1. Smooth and stable operation.. ompact, lightweight and low price. 3. High load capacity due to R-shaped groove.. Four-point contact to carry load and moment in all directions. 5. Series Stainless steel type available. 6. Extra wide type available. High load capacity utilizing the R-shaped groove. The raceway surface over which the balls roll is an R-shaped groove, offering a large contact area. Therefore, the product features a large load capacity and a long effective life. Four-point contact to carry load and moment in all directions. The Gothic arch groove, where the balls contact the raceway surface at four points, enables the load and moment to be carried in all directions. series Stainless steel type (SGS) is available. The SGS type uses stainless steel for the block, ball bearing and guide rail, thus having superior corrosion resistance. Extra wide type (SGW) is also available. With its increased number of rolling elements and increased width, this unit can replace the use of two linear guides. is Stiffness in regard to moment load increased, thus creating an effective compact linear motion mechanism. Slide guides are supplied with temporary ends stops. They are not to be used as positive stops.
Part number for SG Nomenclature SG S 5 UU Type Material S Stainless Steel Height of guide Seal None Without seal UU Seals on both sides 16 N Length of guide rail (mm) Number of carriages per rail Rail mounting hole None N ounterbore Threaded hole SGS5 Only H Reference Planes marking Unit: inches (mm) Height (H) tolerance ±.16 (±.) ifference of heights (H) between paired ones.6 (.15) Width (W 1 ) tolerance ±.16 (±.) ifference of widths (W 1 ) between paired ones. (.) Running parallelism of plane with respect to plane See Fig. Running parallelism of plane with respect to plane See Fig. ccuracy Travel ccuracy Fig. 1 h 1 Fig. 3 W 1 h SG Type Fig. Mounting Surface imensions Unit: inches (mm) part number h1 h SGS5.79 ().39 (1) SGS.9 (.5).39 (1) SG 1.11 (3).59 (1.5) SG13.157 ().79 () GG16.197 (5).13 (3.5) SG5.197 (5).197 (5) SGS9W.11 (3).59 (1.5) SG1W.11 (3).9 (.5) GG1W.157 ().9 (.5) SG16W.197 (5).9 (.5) The corners of the reference planes should be finished with undercuts as shown in Figure 3. The recommended heights of the shoulders of the mounting planes are as shown in the table. To attain high accuracy, it is recommended to finish the mounting planes of the bed and table to an accuracy the same as or better than that of the guide rail and block. Recommended Tightening Torques: The recommended tightening torques for the mounting bolts (hex socket head bolts) are shown here. Unit:lb-ft (N M) Mounting Requirements Fixing Method Fig. Nominal olt Size M M3 M M5 Tightening Torques.95 ().73 (1.) 1. (.5) 3.61(.9) To install a SG Slide Guide (Fig. ), confirm the reference planes as shown in Figure 1, then let the reference planes of the bed and table make close contact with the reference planes of the object and fix them. When using two guide rails, fix the reference side in a state in which it is closely contacted with the reference plane. Fix the adjustment side after adjusting the traveling state with either the guide rails or the block in a free state. 5
all Slide Guide SG SGS ( series Stainless Steel) Slide guides are supplied with temporary ends stops. They are not to be used as positive stops. MOEL SGS5 SGS5UU ims- in (mm) L (Lmm) 1.575 () [3] 5.11 (1) [9] P (M-1) M x P L GUIE RIL LENGTHS / [NUMER OF HOLES] [M] L (Lmm) [M] L (Lmm) [M] L (Lmm) [M].165 (55) [] 6.99 (16) [11] 6 (7) [5] 3.937 (1) [7] P.591 (15) Maximum length is available for special order. MX LENGTH STEEL N/ STINLE 13. () SGS SGSUU 1.575 () [3] 3.937 (1) [7].165 (55) [] 5.11 (1) [9] 6 (7) [5] 3.36 (5) [6].591 (15) N/ 7.6 (7) SG1 SG1UU SGS1 SGS1UU.165 (55) [3] 6.1 (155) [].953 (75) [] 7.677 (195) [1] 3.7 (95) [5] 1.7 (75) [1].57 (115) [6].7 () 19.7 (5) 39.37 (1) SG13 SG13UU SGS13 SGS13UU.7 (1) [5] 1.59 (3) [13] 6.693 (17) [7] 1.567 (37) [15].661 () [9] (7) [19] 1.6 (7) [11].9 (5) 19.7 (5) 39.37 (1) SG16 SG16UU SGS16 SGS16UU 5.96 (15) [] 1.65 (55) [1] 9.55 () [6] 6.37 (67) [17] 1.5 (31) [] 16.99 () [11] 1.575 () 7. (19) 39.37 (1) SG5 SG5UU SGS5 SGS5UU.661 () [] 5.197 (6) [11] 11. () [5] 3.66 () [15] 13.36 () [6] 1.11 (6) [].36 (6) 7. (19) 39.37 (1) all Slide Guide Extra Wide SG-W SGS-W ( series Stainless Steel) MOEL Slide guides are supplied with temporary ends stops. They are not to be used as positive stops. SGS9W SGS9WUU ims- in (mm) 3.15 () [3] 7.7 () [7].331 (11) [] 9.55 () [] 5.51 (1) [5] 1.36 (6) [9] P (M-1) M x x P L GUIE RIL LENGTHS / [NUMER OF HOLES] L (Lmm) [M] L (Lmm) [M] L (Lmm) [M] L (Lmm) [M] 6.693 (17) [6] 11.17 (9) [1] P 1.11 () Maximum length is available for special order. MX LENGTH STEEL STINLE N/ 7.6 (7) SG1W SG1WUU SGS1W SGS1WUU 3.15 () [3] 7.7 () [7].331 (11) [] 9.55 () [] 5.51 (1) [5] 1.36 (6) [9] 6.693 (17) [6] 11.17 (9) [1] 1.11 () 39.37 (1) 39.37 (1) SG1W SG1WUU SGS1W SGS1WUU.331 (11) [3] 1.5 (31) [] 5.96 (15) [] 15.35 (39) [1] 7. (19) [5] (7) [1] 9.55 () [6] 1.575 () 7. (19) 39.37 (1) SG16W SG16WUU SGS16W SGS16WUU 5.96 (15) [] 1.65 (55) [1] 9.55 () [6] 6.37 (67) [17] 1.5 (31) [] 16.99 ()[11 ] 1.575 () 7. (19) 39.37 (1) 6