Lenntech info@lenntech.com Tel. +--6-9 www.lenntech.com Fax. +--66-89 High-efficiency Drinking Water Pump Calio-Therm S Type Series Booklet
Legal information/copyright Type Series Booklet Calio-Therm S All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed for any other purpose, nor otherwise transmitted, published or made available to a third party without the manufacturer's express written consent. Subject to technical modification without prior notice. KSB Aktiengesellschaft, Frankenthal 7..
Contents Contents Building Services: Heating...... Calio-Therm S... Main applications... Fluids handled... Operating data... Designation... Design details... Materials... Product benefits... Certifications... Selection information... Programme overview / selection tables... 7 Technical data... 7 Selection chart... 8 Characteristic curves... 9 Dimensions... Installation information... Scope of supply...
Building Services: Heating Calio-Therm S Main applications Drinking water circulation systems Similar systems in industry and building services applications (e.g. cooling water circulation) Fluids handled Drinking water and water for the food and beverage industry, as per German drinking water regulations Operating data Operating properties Characteristic Value Flow rate Q [m /h], Q [l/s)], Head 6 Fluid temperature T [ C] - 9 Ambient temperature T [ C] - Operating pressure p [bar] Sound pressure level [db (A)] < Piping connection R Designation Example: Calio-Therm S - Designation key Code Description Calio S High-efficiency pump Therm Drinking water pump Nominal diameter of pipe connection R Head in m x (example: m = ) Design details Design Drive Highly efficient, maintenance-free wet rotor pump (glandless) Screw-ended High-efficiency electric motor with continuously variable differential pressure control Electronically commutated synchronous motor with permanent magnet rotor V - /6 Hz IP enclosure Thermal class F Temperature class TF 9 RFI emission EN - Interference immunity EN - Bearings Product-lubricated special plain bearing Operating modes Automatic mode with constant-pressure or proportionalpressure control Fixed-speed operation with manual setpoint input Automatic functions Continuous output adjustment depending on the operating mode Soft start (limitation of starting current) Full motor protection with integrated trip electronics Setback operation Manual functions Setting the operating mode Vent function Deblocking option Setting the differential pressure setpoint Setting the speed level Signalling and display functions Alternating display of flow rate and electrical input power Error messages on the display Materials Overview of available materials Component Material Volute casing Stainless steel Shaft Ceramics Impeller Polyamide (PA - GF ) Bearing Ceramics Bearing plate Stainless steel. Can Stainless steel. Thermal insulation shell Polypropylene Product benefits Maximum savings of operating costs by high-efficiency technology combined with speed control Calio-Therm S
Future-proof by maximum energy efficiency and -year spare parts availability as per the German "Handwerkermarke" trade seal ("Handwerkermarke" guarantee only applies to Germany) Easy to use with a combination of control keys, integrated display and symbols showing the operating status High availability by manual and integrated protective functions Compact dimensions and KSB plug make the pumps easy to install. Thermal insulation shell included in the scope of supply. Certifications Overview Label Effective in: Note Germany All sizes Selection information Minimum pressure The minimum pressure p min at the pump suction nozzle serves to avoid cavitation noises at an ambient temperature of + C and the indicated fluid temperature T max. The indicated values are applicable up to m above sea level. For installation at altitudes > m, an allowance of. bar / m must be added. Minimum pressure p min [bar] specified for the fluid temperature [ C] Size Fluid temperature Minimum pressure [ C] [bar] All to 7, 76 to 9,8 Calio-Therm S
Description of the characteristic curve H ~ VAC a) b) Q P a) b) Q Selection example Min. Fixed speed operation Max. Fixed speed operation Control range, settings in. m increments a) Control curve, maximum head b) Control curve, minimum head The characteristic curve can be adjusted between a) and b) by pressing the control keys. 6 Calio-Therm S
Programme overview / selection tables Features and functions Features and functions Functions Operating modes Δp-v for variable differential pressure Δp-c for constant differential pressure Fixed speed operation (n = constant) Manual functions Setting the operating mode Setting the differential pressure setpoint Setting of speed level Vent plug Deblocking option Automatic functions Continuous output adjustment depending on the operating mode (Δp control) Setback operation Soft start Signalling and display functions Error codes indicated on the display Alternating display of flow rate and electrical input power Feature Technical data Selection table Calio-Therm S Calio-Therm S Connection PN P Piping Pump Motor protection ) Signalling contacts Nominal current Mat. No. [bar] [W] ~ VAC, /6 Hz [A] - R G ½, - -,6 -, 976.8-6 R G ½, - 7 -, -,8 976.8 [kg] ) Integrated motor protection in the terminal box Calio-Therm S 7
Selection chart Calio-Therm S 6 6 8 6 US.gpm 6 8 IM.gpm -6 [ft] -.. Q [m³/h]....... ρ =. kg/m³.. [l/s]..6.8. Calio Therm S -/6/ Illustration of maximum control range 8 Calio-Therm S
Characteristic curves Calio-Therm S - Δpv Calio-Therm S - Δpc 6 8 Q [US.gpm] 6 8 Q [IM.gpm] ~ VAC R 6 8 Q [US.gpm] 6 8 Q [IM.gpm] ~ VAC R H [ft] H [ft].. Q [m³/h]..... Q [l/s]..6... Q [m³/h]..... Q [l/s]..6... P [kw].,m m,m m,m m. P [hp].... P [kw].,m m,m m,m m. P [hp]..... Q [m³/h]... Calio_S_-/... Q [m³/h]... Calio_S_ -/ Calio-Therm S - fixed speed operation Q [US.gpm] 6 8 6 8 Q [IM.gpm] ~ VAC R H [ft].. Q [m³/h]....... Q [l/s]..6.8.... P [kw] P [hp]...... Q [m³/h]..... Stellerbetrieb_Calio_S_-/,, = speed level,, Calio-Therm S 9
Calio-Therm S -6 Δpv Calio-Therm S -6 Δpc Q [US.gpm] 6 Q [IM.gpm] 6 8 ~ VAC R Q [US.gpm] 6 Q [IM.gpm] 8 ~ VAC R H [ft] H [ft].. Q [m³/h]........ Q [l/s]..6.8..6... Q [m³/h]........ Q [l/s]..6.8..6. m m m m,m m m m m,m P [kw]. P [kw].. P [hp].. P [hp]..... Q [m³/h]...... Calio_S_-6-Dpv/.... Q [m³/h]...... Calio_S_-6-Dpc/ Calio-Therm S -6 fixed speed operation 7 6 Q [US.gpm] Q [IM.gpm] ~ VAC R H [ft]..q [m³/h]......... Q [l/s]..6.8...6. P [hp]. P [kw]......q [m³/h]....... Stellerbetrieb_Calio_S_-6/,, = speed level,, Calio-Therm S
Dimensions Calio-Therm S 69 99 G / 8 6 Screw-ended pumps Dimensions [mm] Size R G - / -6 / Installation information Calio-Therm S Permissible installation positions Sizes All Scope of supply Pump Sealing elements Installation and operating manual Thermal insulation shells Calio-Therm S
Lenntech info@lenntech.com Tel. +--6-9 www.lenntech.com Fax. +--66-89 7./-EN 7..