Bench Top Extraction Arms The Nederman BenchTop arms can be used in every type of environment, ranging from assembly stations, where solder fumes are extracted, to laboratories, where protection against highly corrosive or noxious gases is vital. For more information on each product: see following pages. Original Connection direction* Arm Ø, mm Length, mm Down 32 850 70502834 Up/down 50 700 70510144 Down 50 1100 70510244 Down 50 1500 70510444 Up 50 1100 70510344 Up 50 1500 70510544 Down 75 1100 70540144 Down 75 1500 70540344 Up 75 1100 70540244 Up 75 1500 70540444 Up/down 100 1200 70570144 Down 100 1800 70570244 Up 100 1800 70570344 Up 100 2400 70570544 * Note: Different spring mechanisms are fitted depending on connection direction Connection direction* Arm Ø, mm Length, mm FX32 FX50 FX75 FX100 Down 32 850 70502934 Up/down 50 700 70530144 Down 50 1100 70530244 Down 50 1500 70530444 Up 50 1100 70530344 Up 50 1500 70530544 Down 75 1100 70560144 Down 75 1500 70560344 Up 75 1100 70560244 Up 75 1500 70560444 Up/down 100 1200 70590144 Down 100 1800 70590244 Up 100 1800 70590344 Up 100 2400 70590544 ORIGINAL CHEM * Note: Different spring mechanisms are fitted depending on connection direction CHEM Connection direction* Arm Ø, mm Length, mm Down 75 1100 70550144 Down 75 1500 70550344 Connection down Up 75 1100 70550244 Up 75 1500 70550444 Up/down 100 1200 70580144 Down 100 1800 70580244 Up 100 1800 70580344 Up 100 2400 70580544 Connection up * Note: Different spring mechanisms are fitted depending on connection direction 50 www.nederman.com
Guide to Bench Top Extraction Kits Original Extractor kit Voltage, V / Electrical plug ORIGINAL 500 220-240 / EUR 70510634 500 220-240 / UK 70510734 1000 220-240 / EUR 70511134 1000 220-240 / UK 70511234 1500 220-240 / EUR 70511634 1500 220-240 / UK 70511734 2000 240 / EUR 70505044 2000 240 / UK 70505144 2500 240 / EUR 70505644 2500 240 / UK 70505744 3000 240 / EUR 70506244 3000 240 / UK 70506344 Extractor kit Voltage, V / Electrical plug 500 220-240 / EUR 70510639 500 220-240 / UK 70510739 1000 220-240 / EUR 70511139 1000 220-240 / UK 70511239 1500 220-240 / EUR 70511639 1500 220-240 / UK 70511739 2000 240 / EUR 70505344 2000 240 / UK 70505444 2500 240 / EUR 70505944 2500 240 / UK 70506044 3000 240 / EUR 70506544 3000 240 / UK 70506644 Extraction Kit Original 500 Extraction Kit Original 1000 Extraction Kit Original 1500 Extraction Kit Original 2000 Extraction Kit Original 2500 Extraction Kit Original 3000 51 www.nederman.com
FX Extraction Arm 32 A unique flexible plastic hose, self-supporting without joints, for workplaces with limited space. For extraction of fumes, etc. when soldering, gluing, or working with solvents. Can be connected in single applications, in systems, and with or without filter. Easily mounted to a workbench or similar. Can be mounted standing, hanging or attached to the wall. Flexible in all directions and simple to position. Easy to dismantle for easy cleaning. The arm is equipped with a damper close to the swivel Also available in an version, electrically conductive, for electronic applications Capacity, m³/h 20-60 Arm Ø, mm 32 Arm length, mm 1000 FX Extraction Arm 50 Made of light-weight anodized aluminium sections, with two or three adjustable, plastic friction joints. For extraction of fumes, etc. when soldering, gluing, or working with solvents. Can be connected in single applications, in systems, and with or without filter. Easily mounted to a workbench or similar. Can be mounted standing, hanging or attached to the wall. Flexible in all directions and simple to position. Easy to dismantle for easy cleaning. Equipped with a damper close to the extraction opening Model for bench mounting (connection down) or wall/ceiling mounting (connection up) available. Also available in an version, electrically conductive, for electronic applications Capacity, m³/h 50-110 Arm Ø, mm 50 Arm length two joints, mm 700 Arm length three joints, mm 1100 and1500 Temperature extracted air, C -10 to +70 Accessories: see end of chapter 52 www.nederman.com
FX Extraction Arm 75 Made of light-weight anodized aluminium sections, with two or three adjustable plastic friction joints. For extraction of fumes, etc. when soldering, gluing, or working with solvents. Can be connected in single applications, in systems, and with or without filter. Easily mounted to a workbench or similar. Can be mounted standing, hanging or attached to the wall. Flexible in all directions and simple to position. Easy to dismantle for easy cleaning. Equipped with a damper close to the extraction opening Model for bench mounting (connection down) or wall/ceiling mounting (connection up) available Also available in an version, electrically conductive, for electronic applications Also available in a CHEM version, for chemical applications Capacity, m³/h 110-240 Arm Ø, mm 75 Arm length three joints, mm 1100 and1500 Temperature extracted air, C -10 to +70 FX Extraction Arm 100 Made of light-weight anodized aluminium sections with two or three adjustable plastic friction joints. For extraction of fumes, etc. when soldering, gluing, or working with solvents. Can be connected in single applications, in systems, and with or without filter. Easily mounted to a workbench or similar. Can be mounted standing, hanging or attached to the wall. Flexible in all directions and simple to position. Easy to dismantle for easy cleaning. Equipped with a damper close to the extraction opening Model for bench mounting (conn. down) or wall/ceiling mounting (conn. up) available. Also available in an version, electrically conductive, for electronic applications Available in a CHEM version, for chemical applications Capacity, m³/h 200-500 Arm Ø, mm 100 Arm length three joints, mm 1200, 1800 and 2400 Temperature extracted air, C -10 to +70 Accessories: see end of chapter 53 www.nederman.com
Extraction Kit Original 500 Designed for one smaller workplace, where the demand for airflow is up to 30m³/h per arm. The kit consists of an extraction arm FX 32 with table bracket and a CX 5500 filter and fan unit. (For more information see separate product section.) One speed on/off. Complete with hose and extraction hood. The hood is made of clear plastic, which increases the visibility (not the hood). Also available in an version for the electronics industry. Airflow, m³/h 30 Power, W 80 Arm Ø, mm 32 Arm length, mm 850 Hose Ø, mm 32 Hose length, m 1.5 Weight filter and fan, kg 8.6 Extraction Kit Original 1000 Designed for two smaller workplaces for simultaneous use, where the demand for airflow is up to 42m³/h per arm. The kit consists of two extraction arms FX 32 with table brackets, filter unit and fan N3. (For more information see separate product section.) The speed of the fan is variably controlled by a speed controller. Complete with hoses and extraction hoods. The hood is made of clear plastic, which increases the visibility (not the hood). Also available in an version for the electronics industry. Airflow, m³/h 42 Power, W 170 Arm Ø, mm 32 Arm length, mm 850 Hose Ø, mm 45 Hose length, m 3.0 Weight filter and fan, kg 8.0 Extraction Kit Original 1500 Designed for three smaller workplaces for simultaneous use, where the demand for airflow is up to 38m³/h per arm. The kit consists of three extraction arms FX 32 with table brackets, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is variably controlled by a speed controller. Complete with hoses and extraction hoods. The hood is made of clear plastic, which increases the visibility (not the hood). Also available in an version for the electronics industry. Airflow, m³/h 38 Power, W 170 Arm Ø, mm 32 Arm length, mm 850 Hose Ø, mm 45 Hose length, m 3.0 Weight filter and fan, kg 8.0 54 www.nederman.com
Extraction Kit Original 2000 Designed for one workplace, where the demand for airflow is up to 100m³/h. The kit consists of a FX 50 with swivel, table bracket, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is variably controlled by a speed controller. Complete with hose and combination hood. The hood is made of clear plastic, which increases the visibility (not the hood). Also available in an version for the electronics industry. Airflow, m³/h 100 Power, W 170 Arm Ø, mm 50 Arm length, mm 1100 Hose Ø, mm 75 Hose length, m 3.0 Weight filter and fan, kg 8.0 Extraction Kit Original 2500 Designed for two workplaces, where the demand for airflow is up to 75m³/ h per arm. The kit consists of two extraction arms FX 50 with swivel, table brackets, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is variably controlled by a speed controller. Complete with hoses and extraction nozzles. Also available in an version for the electronics industry. Airflow, m³/h 75 Power, W 170 Arm Ø, mm 50 Arm length, mm 1100 Hose Ø, mm 75 Hose length, m 3.0 Weight filter and fan, kg 8.0 Extraction Kit Original 3000 Designed for one workplace, where the demand for airflow is up to 150m³/ h. The kit consists of an extraction arm FX 75 with swivel, table bracket, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is variably controlled by a speed controller. Complete with hose and extraction nozzle. Also available in an version for the electronics industry. Airflow, m³/h 150 Power, W 170 Arm Ø, mm 75 Arm length, mm 1100 Hose Ø, mm 100 Hose length, m 3.0 Weight filter and fan, kg 8.0 55 www.nederman.com
CX 5500 Filter and Fan Unit The product consists of a filter with an integrated fan delivered with a connection hose. It is designed for extraction and filtration of noxious fumes and vapours from a single work place. For instance when soldering, gluing or working with solvents. It is intended to be used in combination with one FX Extraction Arm 32 or the Down Flow Grille FD 23. The unit is certified as standard. This means that it is electrically conductive for electronic applications. Airflow, m³/h 30 Filtration degree at 0.3 um DOP, % 99.97 Gas adsorption media, kg 1.35 Voltage, V 220-240 Power, W 85 Connection Ø, mm 32 Connection hose length, m 1.5 Noise level, db(a) 43 Filter Ø, mm 255 Filter height, mm 400 Weight, kg 8.6 Easy to install The unit is compact and virtually silent The filter consists of particle, HEPA and gas filter The filter cartridges are disposable and easy to change Description Filter unit CX 5500, 220-240V,, EUR-plug 70503149 Filter unit CX 5500, 220-240V,, UK-plug 70503249 Description Filter, particle / gas 70371596 Filter, micro 70371503 56 www.nederman.com
N3 Fan and Filter Cartridge The product consists of a separate filter cartridge and a N3 fan connected together. It is designed for extraction and filtration of noxious fumes and vapours for the smaller workplace, for instance when soldering, gluing or working with solvents. It is intended to be used in different combinations with the FX arms or the Down Flow Grille FD 23. Easy to install The filter cartridge consists of particle, HEPA and gas filter The filter cartridge is disposable and easy to change Gas only filter available with larger amount of adsorption media, than the standard cartridge It is possible to combine two filters on top of each other with an adapter The speed of the fan is variably controlled by a speed controller, thyristor Together with a silencer box, the unit is certified, which makes it electrically conductive for electronic applications. Filter Fan Assembled unit Airflow, m³/h 300 Filtration degree at 0.3 um DOP, % 99.97 Particle filter area, m2 2.5 Gas adsorption media, kg 1.3 Voltage, V 220-240 Phase 1 Power, W 170 Connection Ø, mm 125 Noise level, db(a) 60 Length, mm 388 320 Width, mm 288 140 Height, mm 285 270 555 Weight, kg 3.8 4.6 8.4 Description Fan 0.17KW, with speed control, EUR-plug 70800134 Fan 0.17KW, with speed control, UK-plug 70800234 Filter - standard for EK 1000-3000 70311427 Filter - gas for EK 1000-3000 70312427 Accessory Silencer/ Box for EK s 1000-3000 70311429 Adapter for connecting two EK filter cartridges 1000-3000 70332904 57 www.nederman.com
TX 2000 Soldering Filter Compressed air driven filter unit for extraction of soldering fumes. Designed for one or two soldering irons equipped with integrated tip extraction. The unit consists of a filter and a venturi device regulated by a valve. Easy to install The unit is compact and virtually silent The filter consists of particle and gas filter The filter cartridge is disposable and easy to change The unit requires a compressed air supply The airflow is easily set by the reducing valve The unit is certified as standard. This means that it is electrically conductive for electronic applications Airflow, m³/h 30 Filtration degree at 0.3 um DOP, % 99.97 Particle filter area, m2 0.9 Gas adsorption media, kg 0.85 Compressed air consumtion approx., l/min 40-60 Working pressure, bar 3-8 Connection Ø, mm 4-6 Noise level, db(a) 42 Filter Ø, mm 210 Filter height, mm 280 Weight, kg 1.8 Description Filter unit TX 2000 70500449 Description Clip-on kit micro, 70371501 Clip-on kit universal, 70371502 Kit for connecting two soldering irons 70371516 Filter cartridge for TX 2000, 70371529 58 www.nederman.com
Down Flow Grille FD 23 An extraction device designed to be integrated directly in the bench top surface. It is highly effective in capturing the heavy fumes from gluing, solvents and similar. Typical workplaces are schools, laboratories, electronic and medical industries. Recommended to use together with fan/filter CX 5500, or fan N3 with filter. Made of stainless steel which resists many common chemical substances. Can easily be used in combination with an extraction hood for increased extraction capacity. Grille Ø 260 mm. Connection Ø 45 mm. Does not interfere with other equipment in your workplace Easy to dismantle for internal cleaning Perforated suction area with pre filter Virtually silent when connected to a CX 5500 Description Down Flow Grille FD 23 70373527 Accessory Reduction 45/32 mm 70373605 59 www.nederman.com
Accessories for Bench Top Extraction Extraction Arms 1 2 3 4 5 6 3 4 5 x 2 6 Original Description Fits FX Arm Size, mm 1 Table bracket 32 70371761 2 Wall bracket 32 70371760 3 Bracket complete 50 / 75 / 100 L=250 70501144 4 Bracket 50 / 75 / 100 70501244 5 Extension profile 50 / 75 / 100 L=1100 70501344 6 Table bracket 50 / 75 / 100 70501444 Cover ring, ceiling 50 / 75 Ø 130, T=3 70502644 Description Fits FX Arm Size, mm 1 Table bracket 32 70371761 2 Wall bracket 32 70371760 3 Bracket complete 50 / 75 / 100 L=250 70501144 4 Bracket 50 / 75 / 100 70501244 5 Extension profile 50 / 75 / 100 L=1100 70501344 6 Table bracket 50 / 75 / 100 70501444 Cover ring, ceiling 50 / 75 Ø 130, T=3 70502644 CHEM Description Fits FX Arm Size, mm 3 Bracket complete 50 / 75 / 100 L=250 70501144 4 Bracket 50 / 75 / 100 70501244 5 Extension profile 50 / 75 / 100 L=1100 70501344 6 Table bracket 50 / 75 / 100 70501444 Cover ring, ceiling 50 / 75 Ø 130, T=3 70502644 60 www.nederman.com
Hoods Reducers 1 2 3 4 5 1 2 3 4 Original Fits FX Arm Size, mm 1 Flange hood 32 150x160 70371525 2 Dome hood 1/2 32 260x120 70371756 3 Dome hood 1/1 32 Ø 260 70371757 4 Metal hood 50 / 75 / 100 Ø 280 70500444 5 Combination hood 50 / 75 / 100 380x460 70500144 Fits FX Arm Size, mm 2 Dome hood 1/2 32 260x120 70371807 3 Dome hood 1/1 32 Ø 260 70371808 4 Metal hood 50 / 75 / 100 Ø 280 70500544 5 Combination hood 50 / 75 / 100 380x460 70500244 Original Fits FX Arm Ø, mm 1 50 / 75 / 100 63 70500644 2 50 / 75 / 100 75-80 70500744 3 50 / 75 / 100 100 70500844 4 50 / 75 / 100 125 70500944 Fits FX Arm Ø, mm Part No. 1 50 / 75 / 100 63 70500644 2 50 / 75 / 100 75-80 70500744 3 50 / 75 / 100 100 70500844 4 50 / 75 / 100 125 70500944 CHEM Fits FX Arm Size, mm 4 Metal hood 50 / 75 / 100 Ø 280 70500444 5 Combination hood 50 / 75 / 100 380x460 70500344 CHEM Fits FX Arm Ø, mm 1 50 / 75 / 100 63 70500644 2 50 / 75 / 100 75-80 70500744 3 50 / 75 / 100 100 70500844 4 50 / 75 / 100 125 70500944 Hoses Original Description Ø, mm Length, mm Hose (black) 32 1500 70400052 Hose (white) 45 3000 70501644 Hose (grey) 75 3000 70501544 Hose (grey) 100 3000 70501744 Hose (grey) 125 5000 70501844 Description Ø, mm Length, mm Hose (black) 45 3000 70502044 Hose (black) 75 3000 70501944 Hose (black) 100 3000 70502144 Hose (black) 125 3000 70502244 61 www.nederman.com