FLYWHEEL HORSEPOWER Gross: 110 kw 147 HP / 2000 min -1 Net: 103 kw 138 HP / 2000 min -1 OPERATING WEIGHT PC200-8M0: 19800 20500 kg PC200LC-8M0: 20700 21700 kg PC200-8 PC200LC-8 PC 200 HYDRAULIC EXCAVATOR Photos may include optional equipment.
PC200-8M0 H YDRAULIC E XCAVATOR WALK-AROUND Ecology and Economy Features c Low fuel consumption by total control of the engine, hydraulic and electronic system Reduces fuel consumption by approx. 7% (Compared with the PC200-8) c Low emission engine A powerful, turbocharged and air-to-air aftercooled Komatsu SAA6D107E-1 provides 103 kw 138 HP Economy mode improves fuel consumption ECO-gauge for energy-saving operations Extended idling caution for fuel conservation c Low operation noise Using the low-noise engine and methods to cut noise at source See pages 4 and 5. Large Comfortable Cab Low-noise cab, similar to passenger car Low vibration with cab damper mounting Operator seat and console with armrest enables operators to work in the appropriate posture See page 6. Safety Design ROPS cab (ISO 12117-2) for protecting the operator in the event of a roll-over accident Slip-resistant plates for improved foot grid Rear view monitoring system for viewing the work area to the rear of the machine (optional) See page 7. 2
HYDRAULIC EXCAVATOR PC200-8 HORSEPOWER Gross: 110 kw 147 HP / 2000 min -1 Net: 103 kw 138 HP / 2000 min -1 Information & Communication Technology Large multi-lingual high resolution LCD monitor Assist in improvement efficiency Equipped with the EMMS monitoring system See page 8. OPERATING WEIGHT PC200-8M0: 19800 20500 kg PC200LC-8M0: 20700 21700 kg BUCKET CAPACITY 0.50 1.17 m 3 Easy Maintenance Long replacement interval of engine oil, engine oil filter, and hydraulic filter Remote mounted engine oil filter and fuel drain valve for easy access Equipped with the fuel pre-filter and water separator as standard Side-by-side cooling concept enables individual cooling modules to be serviced See page 9. 3
PC200-8M0 H YDRAULIC E XCAVATOR ECOLOGY & ECONOMY FEATURES Komatsu Technology Seven-inch TFT liquid crystal display Hydraulic control valve Flow divide/merge control with EPC Hydraulic system controller Komatsu develops and produces all major components, such as engines, electronics and hydraulic components, in house. With this Komatsu Technology, and adding customer feedback, Komatsu is achieving great advancements in technology. To achieve both high levels of productivity and economical performance, Komatsu has developed the main components with a total control system. The result is a new generation of high performance and environment-friendly excavators. Electronic control unit for engine Engine Heavy duty High Pressure Common Rail (HPCR) system Main pump Two pump independent control Low Fuel Consumption The newly-developed Komatsu SAA6D107E-1 engine enables NOx emissions to be significantly reduced with the accurate multi-staged fuel injection by the engine controller. It improves total engine durability using the high-pressure fuel injection system developed specifically for construction machinery. This excavator significantly reduces hourly fuel consumption using the highly-efficient matching techniques of the engine and hydraulic unit and also provides features that promote energy-saving operations such as the E mode and ECO-gauge. Fuel consumption 7% reduced vs. PC200-8 Based on typical work pattern collected via KOMTRAX. Fuel consumption varies depending on job conditions. 4
HYDRAULIC EXCAVATOR PC200-8 Low Emission Engine Komatsu SAA6D107E-1 reduced NOx emission by 29% compared with the PC200-7. Working Modes Selectable The PC200-8M0 excavator is equipped with six working modes (P, E, L, B, ATT/P and ATT/E mode). Each mode is designed to match engine speed and pump output to the application. This provides the flexibility to match equipment performance to the job at hand. Working Mode Application Advantage P E Power mode Economy mode Maximum production/power Fast cycle times Good cycle times Better fuel economy L Lifting mode Suitable attachment speed B ATT/P Breaker mode Attachment Power mode Optimum engine rpm, hydraulic flow Optimum engine rpm, hydraulic flow, 2way Power mode Low Operation Noise Enables a low noise operation using the low-noise engine and methods to cut noise at source. Reduced fan speed Large capacity radiator V shape type fin Low-noise shroud P E L B ATT/P ATT/E ATT/E Work priorty P mode Fuel priorty E mode L mode B mode Work priorty ATT/P mode Fuel priorty ATT/E mode Attachment Economy mode Optimum engine rpm, hydraulic flow, 2way Economy mode Electronically controlled common rail type engine Multi-stage injection Highly rigid cylinder block Idling Caution To prevent unnecessary fuel consumption, an idling caution is displayed on the monitor, if the engine idles for 5 minutes or more. Low-noise muffler Lifting Mode When the Lifting mode is selected, lifting capacity is increased 7% by raising hydraulic pressure. ECO-gauge that Assists Energy-saving Operations Equipped with the ECO-gauge that can be recognized at a glance on the right of the multi-function color monitor for environment-friendly energy-saving operations. Allows focus on operation in the green range with reduced CO 2 emissions and efficient fuel consumption. ECO-gauge 5
PC200-8M0 H YDRAULIC E XCAVATOR WORKING ENVIRONMENT Low Vibration with Cab Damper Mounting PC200-8M0 uses viscous damper mounting for cab that incorporates longer stroke and the addition of a spring. The new cab damper mounting combined with high rigidity deck aids vibration reduction at operator seat. Low Cab Noise The newly-designed cab is highly rigid and has excellent sound absorption ability. Thorough improvement of noise source reduction and use of low noise engine and hydraulic equipment. Wide Newly-designed Cab Newly-designed wide spacious cab includes seat with reclining backrest. The seat height and longitudinal inclination are easily adjusted using a pull-up lever. You can set the appropriate operational posture of armrest together with the console. Reclining the seat further enables you to place it into the fully flat state with the headrest attached. Rubber Spring Silicon Oil 6
HYDRAULIC EXCAVATOR PC200-8 Safety Design ROPS Cab The machine is equipped with a ROPS cab that conforms to ISO 12117-2 for excavators as standard equipment. The ROPS cab has high shock-absorption performance, featuring excellent durability and impact strength. It also satisfies the requirements of ISO OPG top guard level 1 for falling objects. Combined with the retractable seat belt, The ROPS cab protects the operator in case of tipping over and against falling objects. Lock Lever Locks the hydraulic pressure to prevent unintentional movement. Neutral start function allows machine to be started only in lock position. Large Side-view, Rear, and Sidewise Mirrors Enlarged left-side mirror and addition of rear and side mirror allow the PC200-8M0 to meet the new ISO visibility requirements. Rear View Monitoring System (optional) The operator can view the rear of the machine with a color monitor screen. Thermal and Fan Guards Rear view image on monitor Slip-resistant Plates Highly durable slipresistant plates maintain superior traction performance for the long term. Thermal and fan guards are placed around hightemperature parts of the engine and fan drive. Pump/engine Room Partition Pump/engine room partition prevents oil from spraying onto the engine if a hydraulic hose should burst. 7
PC200-8M0 H YDRAULIC E XCAVATOR INFORMATION & COMMUNICATION TECHNOLOGY 4 1 2 3 7 5 6 8 9 Large Multi-lingual High Resolution LCD Monitor A large user-friendly high resolution LCD color monitor enables safe, accurate and smooth work. Visibility and resolution are further improved compared with current 7-inch large TFT LCD. Simple and easy to operate switches. Function keys facilitate multi-function operations. Displays data are available in 25 languages to globally support operators around the world. TFT : Thin Film Transistor LCD : Liquid Crystal Display Basic operation switches 1 2 3 4 5 6 Function switches Indicators 1 2 Auto-decelerator Working mode 3 Travel speed 4 Engine wat er temperature gauge 5 6 7 8 9 Hydraulic oil temperature gauge Fuel gauge ECO-gauge Fuel consumption gauge Function switches menu Basic operation switches 1 2 3 Auto-decelerator Working mode selector Traveling selector 4 5 6 Buzzer cancel Wiper Windshield washer Assist in Improvement Efficiency The main screen displays advices for promoting energy-saving operations as needed. The operator can use the ECO Guidance menu to check the Operation Records, ECO Guidance Records, Average Fuel Consumption Logs, etc. Equipment Management Monitoring System (EMMS) Monitor Function Controller monitors engine oil level, coolant temperature, battery charge air clogging, etc. If the controller finds any abnormality, it is displayed on the LCD. ECO guidance ECO guidance menu Maintenance Function The monitor informs replacement time of oil and filters on the LCD when the replacement interval is reached. ECO guidance records Operation records Trouble Data Memory Function Monitor stores abnormalities for effective troubleshooting. Average fuel consumption logs 8
HYDRAULIC EXCAVATOR MAINTENANCE FEATURES PC200-8 Side-by-side Cooling Since radiator, aftercooler and oil cooler are arranged in parallel, it is easy to clean, remove and install them. Radiator, aftercooler, and oil cooler made of aluminum have high cooling efficiency and are easily recycled. Easy Access to Engine Oil Filter and Fuel Drain Valve Engine oil filter and fuel drain valve are remote mounted to improve accessibility. Sloping Track Frame Prevents dirt and sand from accumulating and allows easy mud removal. Gas Assisted Engine Hood Damper Cylinders The engine hood can be easily opened and closed with the help of gas assisted engine hood damper cylinders. Fuel Pre-filter and Water Separator Equipped with fuel Pre-filter with water separator, and additional large-sized water separator remove water and contaminants effectively. Washable Cab Floormat The cab floormat is easy to keep clean. The gently inclined surface has a flanged floormat and drainage holes to facilitate runoff. Equipped with the Eco-drain Valve as Standard. Prevents clothes and the ground from becoming contaminated due to oil leakage when replacing the engine oil. Large-capacity Fuel Tank and Rustproof Treatment 400-liter high-capacity fuel tank. Effective corrosion resistance using rustproof treatment. Long-life Oil, Filter Uses high-performance filtering materials and longlife oil. Extends the oil and filter replacement interval. Engine oil & Engine oil filter Hydraulic oil Hydraulic oil filter High Efficiency Fuel Filter Fuel system reliability is even better with high efficiency fuel filter. Hydraulic oil filter (Eco-white element) every 500 hours every 5000 hours every 1000 hours 9
PC200-8M0 H YDRAULIC E XCAVATOR SPECIAL FEATURE (Available in Selected Countries) Assists Customer's Equipment Management and Contributes to Fuel Cost Cutting Equipment Management Support KOMTRAX terminal installed on your machine collects and sends information such as machine location, working record, machine conditions, etc. using wireless communication. You can review the KOMTRAX data remotely via the online application. KOMTRAX gives you not only information on your machine, but also the convenience of managing your fleet on the Web. Energy-saving Operation Support Report Location KOMTRAX can provide various useful information which includes the energy-saving operation support report created based on the operating information of your machine such as fuel consumption and idle time. Movement generated position & Operation map 10 Monthly status summary
HYDRAULIC EXCAVATOR SPECIAL APPLICATION PC200-8 Attachment Piping Specification Equips PC200-8M0 for Breaker and Crusher installation. Hydraulic flow rate can be regulated by setting Breaker Mode on monitor panel during breaker operation. Accumulator Pilot filter Heavy duty arm Stop valve Operating pedal Additional filter for breaker Super Long Front Swing Yarder PC200-8M0 15m PC200LC-8M0 15m, 18m PC200-8M0 Swing Yarder, high job efficiency of timber yarding 11
PC200-8M0 H YDRAULIC E XCAVATOR SPECIFICATIONS ENGINE Model...................................... Komatsu SAA6D107E-1 Type............................ Water-cooled, 4-cycle, direct injection Aspiration................................ Turbocharged, aftercooled Number of cylinders............................................ 6 Bore................................................... 107 mm Stroke................................................. 124 mm Piston displacement........................................ 6.69 L Horsepower: SAE J1995................................ Gross 110 kw 147 HP ISO 9249 / SAE J1349......................... Net 103 kw 138 HP Rated rpm.......................................... 2000 min -1 Fan drive method for radiator cooling....................... Mechanical Governor................................All-speed control, electronic HYDRAULICS Type.......... HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves Number of selectable working modes............................... 6 Main pump: Type............................. Variable displacement piston type Pumps for............... Boom, arm, bucket, swing, and travel circuits Maximum flow......................................439 L / min Supply for control circuit........................... Self-reducing valve Hydraulic motors: Travel...................... 2 x axial piston motor with parking brake Swing................ 1 x axial piston motor with swing holding brake Relief valve setting: Implement circuits...........................37.3 MPa 380 kg/cm 2 Travel circuit..................................37.3 MPa 380 kg/cm 2 Swing circuit................................28.9 MPa 295 kg/cm 2 Pilot circuit...................................3.2 MPa 33 kg/cm 2 Hydraulic cylinders: (Number of cylinders bore x stroke x rod diameter) Boom............................ 2 120 mm x 1334 mm x 85 mm Arm............................. 1 135 mm x 1490 mm x 95 mm Bucket for 2.93 m arm.............. 1 115 mm x 1120 mm x 80 mm for 2.41 m arm............. 1 115 mm x 1120 mm x 80 mm for 1.84 m arm............. 1 125 mm x 1110 mm x 85 mm DRIVES AND BRAKES Steering control............................... Two levers with pedals Drive method.......................................... Hydrostatic Maximum drawbar pull............................. 178 kn 18200 kg Gradeability............................................ 70%, 35 Maximum travel speed: High............................. 5.5 km/h (Auto-Shift) Mid.............................. 4.1 km/h (Auto-Shift) Low.............................. 3.0 km/h Service brake........................................hydraulic lock Parking brake................................. Mechanical disc brake SWING SYSTEM Drive method.......................................... Hydrostatic Swing reduction......................................planetary gear Swing circle lubrication............................... Grease-bathed Service brake........................................hydraulic lock Holding brake/swing lock....................... Mechanical disc brake Swing speed...........................................12.4 min -1 UNDERCARRIAGE Center frame.............................................x-frame Track frame...........................................box-section Seal of track.......................................... Sealed track Track adjuster...........................................hydraulic Number of shoes (each side): PC200-8M0................................................ 45 PC200LC-8M0.............................................. 49 Number of carrier rollers................................. 2 each side Number of track rollers (each side): PC200-8M0................................................. 7 PC200LC-8M0............................................... 9 COOLANT AND LUBRICANT CAPACITY (REFILLING) Fuel tank................................................. 400 L Coolant.................................................. 20.4 L Engine................................................... 23.1 L Final drive, each side......................................... 3.6 L Swing drive................................................ 6.5 L Hydraulic tank............................................. 135 L OPERATING WEIGHT (APPROXIMATE) Operating weight including 5700 mm one-piece boom, 2925 mm arm, SAE heaped 0.80 m 3 backhoe bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment. PC200-8M0 PC200LC-8M0 Operating Ground Operating Ground Shoes Weight Pressure Weight Pressure 500 mm 19800 kg 600 mm 19900 kg 700 mm 20200 kg 800 mm 20500 kg 54.9 kpa 0.56 kg/cm 2 46.1 kpa 20700 kg 43.1 kpa 0.47 kg/cm 2 0.44 kg/cm 2 40.2 kpa 21100 kg 37.2 kpa 0.41 kg/cm 2 0.38 kg/cm 2 35.3 kpa 21400 kg 33.3 kpa 0.36 kg/cm 2 0.34 kg/cm 2 900 mm 21700 kg 30.4 kpa 0.31 kg/cm 2 12
HYDRAULIC EXCAVATOR PC200-8 DIMENSIONS Arm Length 1840 mm 2410 mm 2925 mm A Overall length 9480 mm 9495 mm 9425 mm B Length on ground (transport): PC200-8M0 6270 mm 5700 mm 4815 mm PC200LC-8M0 6455 mm 5885 mm 5000 mm C Overall height (to top of boom) 2985 mm 3190 mm 2970 mm PC200-8M0 PC200LC-8M0 D Overall width 2800 mm 3080 mm E Overall height (to top of cab) 3040 mm 3040 mm F Ground clearance, counterweight 1085 mm 1085 mm G Ground clearance (minimum) 440 mm 440 mm H Tail swing radius 2750 mm 2750 mm I Track length on ground 3275 mm 3655 mm J Track length 4070 mm 4450 mm K Track gauge 2200 mm 2380 mm L Width of crawler 2800 mm 3080 mm M Shoe width 600 mm 700 mm N Grouser height 26 mm 26 mm O Machine cab height 2095 mm 2095 mm P Machine cab width 2710 mm 2710 mm Q Distance, swing center to rear end 2710 mm 2710 mm H P A Q E C F O G K D,L M J B I N BACKHOE BUCKET, ARM, AND BOOM COMBINATION Bucket Capacity (heaped) Width Weight Number Arm Length of Teeth SAE, PCSA CECE Without Side Cutters With Side Cutters With Side Cutters 1.84 m 2.41 m 2.93 m 0.50 m 3 0.45 m 3 750 mm 875 mm 478 kg 3 j j j 0.80 m 3 0.70 m 3 1045 mm 1170 mm 635 kg 5 j j j 0.93 m 3 0.80 m 3 1200 mm 1325 mm 696 kg 5 h h v 1.05 m 3 0.90 m 3 1330 mm 1455 mm 757 kg 6 h h X 1.17 m 3 1.00 m 3 1450 mm 940 kg 6 v v X j: General purpose use, density up to 1.8 t/m 3 v: Light duty work, density up to 1.2 t/m 3 h: General purpose use, density up to 1.5 t/m 3 X: Not usable 13
PC200-8M0 H YDRAULIC E XCAVATOR WORKING RANGE Arm 1840 mm 2410 mm 2925 mm A Max. digging height 9500 mm 9800 mm 10000 mm B Max. dumping height 6630 mm 6890 mm 7110 mm C Max. digging depth 5380 mm 6095 mm 6620 mm D E Max. vertical wall digging depth Max. digging depth of cut for 8' level 4630 mm 5430 mm 5980 mm 5130 mm 5780 mm 6370 mm F Max. digging reach 8850 mm 9380 mm 9875 mm G Max. digging reach at ground level 8660 mm 9190 mm 9700 mm H Min. swing radius 3010 mm 3090 mm 3040 mm Bucket digging force 157 kn 138 kn 138 kn at normal. 16000 kg 14100 kg 14100 kg Arm crowd force 139 kn 124 kn 101 kn at power max. 14200 kg 12600 kg 10300 kg Bucket digging force 177 kn 149 kn 149 kn at normal. 18000 kg 15200 kg 15200 kg Arm crowd force 145 kn 127 kn 108 kn at power max. 14800 kg 13000 kg 11000 kg ISO rating SAE rating (m) 12 11 H 10 9 8 7 6 A 5 B 4 3 2 1 0 G.L. -1-2 C E D -3-4 -5-6 -7 11 10 (m) 9 8 7 6 5 4 2.44 3 2 1 0 G F 14
HYDRAULIC EXCAVATOR PC200-8 STANDARD EQUIPMENT c Additional filter system for poor-quality fuel c Alternator, 35 A, 24 V c Arm, 2925 mm heavy duty c Auto-decel c Automatic engine warm-up system c Batteries, 110 Ah / 12 V x 2 c Boom, 5700 mm heavy duty c Boom holding valve c Cooler c Counterweight c Dry type air cleaner, double element c Electric horn c EMMS monitoring system c Engine, Komatsu SAA6D107E-1 c Engine overheat prevention system c Fan guard structure c Hydraulic track adjusters (each side) c Multi-function color monitor c Power maximizing system c PPC hydraulic control system c Radiator and oil cooler dust proof net c Rear reflector c Rearview mirrors (RH, LH, rear, sidewise) c ROPS cab (ISO 12117-2) c Slip-resistant plates c Starting motor, 4.5 kw/24 V c Suction fan c Track guiding guard, center section c Track roller PC200-8M0, 7 each side PC200LC-8M0, 9 each side c Track shoe PC200-8M0, 600 mm triple grouser PC200LC-8M0, 700 mm triple grouser c Travel alarm c Working light, 5 (boom, boom cylinder, RH and 2 on cab) c Working mode selection system OPTIONAL EQUIPMENT c Air conditioner with defroster c Air pre-cleaner c Alternator, 60 A, 24 V c Arms 2410 mm arm assembly heavy duty 1840 mm arm assembly c Batteries, large capacity c Bolt-on top guard, [Operator Protective Guards level 2] c Cab front guard Full height guard Half height guard c Heater with defroster c Long lubricating intervals for work equipment bushing (500 hours) c Rear view monitoring system c Seat belt, retractable c Seat, suspension c Service valve c Shoes, triple grouser PC200-8M0: 500 mm, 700 mm, 800 mm PC200LC-8M0: 600 mm, 800 mm, 900 mm c Track frame undercover c Track roller guards (full length) c Working lights 1 on counterweight 15
www.komatsu.com Printed in Thailand 201211 IP.As ZESSP208M0-00 Materials and specifications are subject to change without notice. Please contact your local KOMATSU distributor for more information.