All Features of Product Line 5 Included NEW Swiss Rotary Table Technology A winner in terms of technology, space and price perfect for small and medium-sized machining centers TAP rotary tables 5.216 1
Short cycle times of.22 sec / 9 High speed Extended travel in Z- and X-direction More space High transport capacity up to 133 kg Heavy duty Interesting option: Optimal locating and space utilization allow the use of large clamping yokes for the efficient machining of multiple parts TAP1 T1-5751 TAP T1-5851 TAP (option) 23 Typical machines, e.g. + Fanuc Robodrill + Brother Speedio + Huron VX + Haas DT, Minimill, VF + BFW Dhruva + DMG MORI ecomill, Milltap + Jyoti PX, VMC, Mill Tap + Almac CU + Doosan DNM, DT, VC + Hyundai/Wia icut, F + Save energy PGD DD Energy label on the right An intuitive rating as consumption greatly depends on usage, and without any liability assumed, following the directives on energy labelling Benefits of PGD by pl LEHMANN as compared to Direct Drive: small servo, low power draw, no cooling system, and a significantly reduced energy consumption when machining with unclamped rotary table. High torque Feed torque up to 215 Nm Top flexibility Multifunctional spindle HSK Top precision At the workpiece up to 2 µm/1 mm 2
Pneum. clamping up to 2' Nm High clamp Large parts up to ø 4 Big size PGD backlash-free long-life gear unit No backlash High geometric accuracy (max. pivoting drift here: 1 µm on a 2-mm radius) is a prerequisite for ultimate workpiece accuracy (also applies to TAP1) TAP2 T1-5152 TAP T1-51152 TAP (option) up to 5 µm at a 2-mm radius 23 Steel base plate; overhanging ends when mounted crosswise permitted when mounted crosswise per installation proposal pl LEHMANN (also for TAP1) Also for simultaneous operation (also applies to TAP1) Worldwide 25 countries: worldwide service Never adjust Load change without parameter adjust. Low cost No cooling system required 3
TAP1 Optimally located maximum utilization of travel 226 55 4+ 565 28 142 245 18 25 382 18 Option 5 25 9 Standard 3 268 236 12 151 277 248 84 65 65 84 85 134 15 259 215 R149 Technical Data Separate application flyer available for a variety of machines Swiveling axis (5 th axis) kg Bearing / Clamping Gear Unit T1-5751 FANUC MAVILOR MITSUBISHI 2V SANYO / YASKAWA*** T1-5851 T1-5751 T1-5851 Total weight with motor kg 96 Max clamping torque Max spindle load 4 th axis Nm 3 5 th axis Nm 8 3 kg 8 3 9 kg 53 T1-5751 T1-5851 T1-5751 T1-5851 load kg 17 8.5 17 8.5 17 8.5 17 8.5 Max axial force 4 th axis kn 12 Max pull-out torque Max moment of inertia Max feed torque Pa * Ps mid Max speed with load Dividing axis (4 th axis) 4 th axis Nm 1'2 5 th axis Nm 2' load kgm 2.5.2.5.2.5.2.5.2 J max kgm 2.5.2.5.2.5.2.5.2 4 th axis Nm 85 57 12 8 1 57 12 83 5 th axis Nm 135 135 25 25 175 135 21 21 4 th axis ± arc sec 2 / 12 / 2.5 5 th axis ± arc sec 31 / 24 / 2.5 4 th axis ± arc sec 2 5 th axis ± arc sec 2 4 th axis min -1 67 12 111 2 67 12 67 13 5 th axis min -1 45 45 6 6 55 45 6 6 Cycle time 9 min 4 th axis sec.3.22.26.2.3.22.3.22 with load ** 5 th axis sec.48.48.41.41.41.48.39.3 * / increased / WMS (angular position measuring system); can be compensated by pitch error ** Clamping will increase time by approx..1 sec *** Yaskawa Sigma 5, values approximate 4
TAP2 Optimally located maximum utilization of travel 245 34 69 4+ 34 248 625 172 3 21 25 444 18 Option 5 25 9 Standard 3 278 248 125 183 325 295 9 9 11 134 149 15 324 245 25 25 R173 Technical Data Separate application flyer available for a variety of machines Swiveling axis (5 th axis) kg Bearing / Clamping Gear Unit T1-5152 FANUC MAVILOR MITSUBISHI 2V SANYO / YASKAWA*** T1-51152 T1-5152 T1-51152 Total weight with motor kg 136 Max clamping torque Max spindle load T1-5152 T1-51152 T1-5152 T1-51152 4 th axis Nm 8 6 8 6 8 6 8 6 5 th axis Nm 2' 3 kg 133 3 9 kg 85 load kg 42 21 42 21 42 21 42 21 Max axial force 4 th axis kn 2 Max pull-out torque Max moment of inertia Max feed torque Pa * Ps mid Max speed with load Dividing axis (4 th axis) 4 th axis Nm 2' 5 th axis Nm 5'7 load kgm 2.2.7.2.7.2.7.2.7 J max kgm 2 2.7 2.7 2.7 2.7 4 th axis Nm 135 9 25 15 175 12 21 145 5 th axis Nm 215 215 44 44 31 31 27 27 4 th axis ± arc sec 17 / 1 / 2.5 5 th axis ± arc sec 21 / 17 / 2.5 4 th axis ± arc sec 2 5 th axis ± arc sec 2 4 th axis min -1 55 1 8 16 67 13 67 13 5 th axis min -1 27 29 4 44 32 35 3 4 Cycle time 9 min 4 th axis sec.34.24.31.23.32.22.3.22 with load ** 5 th axis sec.76.61.53.44.6.54.66.52 * / increased / WMS (angular position measuring system); can be compensated by pitch error ** Clamping will increase time by approx..1 sec *** Yaskawa Sigma 5, values approximate 5
Spindle accessories More than 2 workpiece clamping systems Spindle accessories in rear + Rotary union 25 bar + Clamping cylinder 23 kn at 12 bar + Angular position measuring system ripas unique T1-51152 Impeller T3-5751 Large series TF-5152 Watch casings TF-5751 Bone implants T1-5751 Large parts TF-5751 Dental implants 6
Strong partnerships in many industries worldwide Accurate fast efficient Automotive Medical / Dental Watches / Micro Technology Eyewear / Jewelry Mechanics Watches / Micro Technology Mechanics Medical / Dental + Eyewear / Jewelry Automotive The entire catalog is subject to technical changes in without notice TF-51151 Medical technology EA-511 Contract manufacturing T1-5252 Contract manufacturing EA-57 Demo T1-5751 Automotive T1-5252 Contract manufacturing For further information refer to the master catalog or PROFI 7
Headquarters Representatives / Agencies PETER LEHMANN AG CH-3552 Bärau Telephone +41 ()34 49 66 66 Fax +41 ()34 49 66 pls@plehmann.com www.lehmann-rotary-tables.com Europe Austria Benelux Czech Republic (vacant) Finland France Germany Hungary (vacant) Italy Norway Poland (vacant) Portugal Russia Slovenia Spain Sweden Turkey UK Headquarters Country representatives vacant America Brazil Canada Mexico USA More information (address, telephone number...) at www.lehmann-rotary-tables.com Subject to change / Printed in Switzerland / Edition: 5/216 8 Asia China India Japan South East Asia South Korea Taiwan Africa South Africa