e-mail:dirtpt@ and.nic.in Ph: 03192-232150 MT/1-11/PS/WS-Tools/2013-14/10736 v.meku rfkk fudksckj iz kklu ANDAMAN & NICOBAR ADMINISTRATION ifjogu funs kky; DIRECTORATE OF TRANSPORT Port Blair dated the 10 th December 2014 CORRIGENDUM The Due Date of Opening of bids for the Tender Enquiry No. MT/1-11/PS/WS-Tools/2013-14/8877 dated 14.10.2014 may be read as 16.12.2014 at 3.30 PM and the last date & time of receipt of bids may be read as 16.12.2014 at 03.00 PM. The Tender documents will be sold upto 4.30 PM on 15.12.2014. The revised schedule and specification of supply can be downloaded from the website www.and.nic.in or can be obtained from the Procurement section, Directorate of Transport, Port Blair. The Manufacturers/authorized dealers/bonafide Government Suppliers shall have to quote the rates as per the revised schedule and specifications of the tools and equipments. All other terms & conditions of the tender shall remain the same. NOTICE BOARD Copy to : 01. The Accounts Officer (Tpt) for information. 02. Office Copy. Assistant Engineer Assistant Engineer
e-mail: dirtpt@and.nic.in Ph: 03192-232150 No. MT/1-11/PS/WS-Tools/2013-14/10736 v.meku rfkk fudksckj iz kklu ANDAMAN & NICOBAR ADMINISTRATION ifjogu funs kky; DIRECTORATE OF TRANSPORT Port Blair dated the 10 th December 2014 CORRIGENDUM TO THE SCHEDULE & SPECIFICATION OF THE TOOLS & EQUIPMENTS VIDE TENDER ENQUIRY No. MT/1-11/PS/WS-Tools/2013-14/8877 dated 14.10.2014 Sl. No. 1. 2. 3. Existing Air Compressor 3Phase, 220lit tank capacity Make: ELGI Pneumatic Impact Wrench DSS 1 inch. Specification: Housing Material Aluminium, Square Drive 1 inch, Max. Torque 2303 Nm, Free Speed- 4500 rpm, Weight 10.8 Kgs. Min Hose dia 19 mm. Accessories:1 inch Power Wrench Sets. Special Oil for Pneumatic Tools. Multipurpose Grease(400 g) Make: Wurth Injector Cleaner Specification: Power Supply System- 110 V/220VAC 50/60 Hz. Power Consumption-200 W, Pressure Gauge 0 to 7 bar, Ultrasonic frequency 25 Khz, Injector Operating Current Automatic adjustment in line with injector type, Selection of rpm 500 to 7000 RPM, Selections of Injection time 1ms to 10 ms. The equipment should be able to perform functions like leakage test, Timing function, Electric Test, Ultrasonic cleaning and Direct Jet. Amendment Air Compressor 3Phase, 220 Lit tank capacity Make: ELGI Model: TS 03120 HN with standard accessories Pneumatic Impact Wrench DSS 1" L Specification: Housing Material Aluminium, Square Drive 1 inch, Max. working Torque 2168 Nm, Weight 13.06 Kgs. Min Hose dia 11 mm. Accessories: 1 inch Power Wrench Sockets (27, 30, 31, 33) Make: Wurth Injector Cleaner with Ultrasonic Bath Specification: Pressure 0 to 7 bar, Ultrasonic frequency 25 Khz, RPM Range 500 to 7000 RPM, Selections of Injection time 1ms to 10 ms. The equipment should be able to perform functions like leakage test, Timing function, Electric Test, Ultrasonic cleaning and Direct Jet. 4. Head Light Beam aligner. Head Light Beam aligner with Digital
5. 6. 7. Specifications: Column height 1413 mm, Lens dia 200 mm, Lens Type glass, Dimensions 1535 Hx630 Bx630 L, Weight 30 Kg, Power Supply 9 V battery for Digital type only, Accuracy(Analog Lux meter - +/- 10 % Analog),Accuracy (Digital Lux Meter) - +/- 15 %,+/- 10% etc, Lux meter Analog or Digital Workshop Crane(Hydraulic) Maximum Lifting Capacity: 2650 mm, Capacity 1 ton, Arm extension 1600 mm at 500 Kg. with features of hand operated mechanism, Quick release mechanism on cylinder, Portable. Lubricating pumps(pneumatically operated) with high pressure grease pump, Capacity 50 Kgs, delivery Hose Length 2.2 m, Working pressure 4.5 10.5 Kg/cm²,Type of Hose Wire braided, Oil resistant, high pressure. UV Leak Detection Kit Refrigerant Identifier Specifications: Dimensions 13.50 inch wide, 11.00 inch deep, 5.00 inch thick portable rugged case, Weight 3.5 Kg, Refrigerant Serviced R 12,R134 a, Detection Technology Non Dispersive Infra red, Power 220 V AC, with Power cord and connection hose, Connection accessory Standard R 12 connection with R 134 a add on piece for Low side coupler, Digital display and purge indication in green and red LED. Digital display of refrigerant percentage in the AC system. Fuel pump drive gear puller (Cummins Tool No.3824469) Piston ring compressor - (Cummins Tool No.ST 755) Engine rebuild Stand - (Cummins Tool No.3375193) Lux Meter. Specifications: Column height 1413 mm, Lens dia 200 mm, Lens Type glass, Dimensions 1535 Hx630 Bx630 L, Weight 30 Kg, Power Supply 9 V battery for Digital type only Workshop Crane(Hydraulic) - Portable with castors Capacity 1 ton, Vertical arm lift: 2500mm (Approx.) Make: Penta / Vanjax Lubricating pumps(pneumatically operated) with high pressure grease pump, Capacity - 50 kgs. With complete accessories - hose and grease gun. Make - ELGI / Penta UV Leak Detection Kit Refrigerant Identifier Specifications: Dimensions 13.50 inch wide, 11.00 inch deep,5.00 inch thick portable rugged case, Weight 3.5 Kg, Refrigerant Serviced R 12,R134 a, Detection Technology Non Dispersive Infra red, Power 220 V AC, with Power cord and connection hose, Connection accessory Standard R 12 connection with R 134 a add on piece for Low side coupler, Digital display and purge indication in green and red LED. Digital display of refrigerant percentage in the AC system. 8. Fuel pump drive gear puller (Cummins Tool No.3824469) 9. Piston ring compressor - (CumminsToolNo.ST755) 10 Engine rebuild Stand - (Cummins Tool No.3375193) 11 Flexible injector puller - Flexible injector puller - (Cummins
12 13 14 15 16 17 18 19 20 21 22 23 24 25 (Cummins Tool No.3823276) Piston ring expander (Cummins Tool No.3823137) Injector tester (Cummins Tool No.3376946) Nozzle cleaning kit (Cummins Tool No.3376947) Digital optical Tachometer. (Cummins Tool No.3377462) Torque Wrench - (50 250 lbft, 7-35 kgf m, 70 340 Nm)Make: Taparia /Everest. Torque Wrench - (0 150 lbft.) Make: Taparia /Everest. Trolley jack for aggregate handling- (For removal of gear box from the vehicle) (TATA Part No.2576 5890 0219) Adaptor trolley for removal of gear box from the vehicle.(tata Part No.2576 5890 2610) Work stand for gear box (TATA Part No.2576 5890 2607) Wrench for splined lock washer (TATA Part No.2505 5890 0109) Power steering tester with 1. Damped pressure gauge with shut off valve 0-250 bar and installed safety valve (130 bar). 2. Damped pressure gauge 0-25 bar without shut off valve. 3. High pressure hoses (02 Nos.) 4. Reducer for high pressure hoses (02 Nos.) (TATA Part No.7418 798530) Grease dispenser (hand operated) Capacity- 10 Kgs Make: Penta Battery charger Specification- 6/72V Make: Penta Arc welding machine 3 Phase, 200A to 400A Tool No.3823276) Piston ring expander (Cummins Tool No.3823137) Injector tester (Cummins Tool No.3376946) Nozzle cleaning kit (Cummins Tool No.3376947) Digital optical Tachometer. (Cummins Tool No.3377462) Torque Wrench (Ratchet) - (Range: 70-340 Nm) Make: Taparia / Everest / Griphold / Britool Torque Wrench (Ratchet) - (Range: 50-220 Nm) Make: Taparia / Everest / Griphold / Britool Trolley jack for aggregate handling- (For removal of gear box from the vehicle) (TATA Part No.2576 5890 0219 ) Adaptor trolley for removal of gear box from the vehicle.(tata Part No.2576 5890 2610) Work stand for gear box (TATA Part No.2576 5890 2607) Wrench for splined lock washer (TATA Part No.2505 5890 0109) Power steering tester with Damped pressure gauge with shut off valve 0-250 bar and installed safety valve (130 bar). Damped pressure gauge 0-25 bar without shut off valve. High pressure hoses (02 Nos.) Reducer for high pressure hoses (02 Nos.) (TATA Part No.7418 798530) Grease dispenser (hand operated) Capacity- 10 Kgs Make: Penta/ELGI Battery charger Specification- 6/72V Make: Pentec Arc welding machine 3 Phase, 200A to 400A
26 Blow lamp Blow lamp 27 Multimeter Make: Metrevi Digital Multimeter Make: Metravi (Digital) 28 Hydrometer Hydrometer 29 Cell tester, 12V Cell tester, 12V Make - Pentec 30 Rotary oil barrel pump Rotary oil barrel pump Make: Penta Make: Penta 31 Hydraulic jack 10Ton Capacity, Hydraulic jack 10Ton Capacity, Make: Make: Penta / National Penta / National 32 Box Spanner set Box Spanner set 8mm to 32mm, 22 skts & 5 accs. 33 Screw Driver (heavy duty), Flat Screw Driver (Heavy Duty) 10 x 450 Taparia - Taparia 34 Screw Driver bits and adaptor 25 mm, 50 mm, 75 mm Bit Driver Set with adaptor (9 bits - 4 Philips & 5 Flat bits) 35 Phillip head screw driver 6 inch Philips head screw driver 150mm, Tip 36 or Equivalent. Combination plier insulated with molded C.A.Sleeve with joint cutter165 mm No.2 Combination plier with joint cutter 165 mm 37 Inner circlip plier, 8 inch Inner circlip plier, 195mm St.Nose 38 Outer circlip plier, 8 inch Outer circlip plier, 195mm St.Nose 39 Pipe Wrench, 450 mm Pipe Wrench, 450 mm - Stillson Type 40 Oil filter wrench, Light duty Oil filter wrench, Light duty 41 Oil filter wrench, Heavy duty Oil filter wrench, Heavy duty 42 Oil can with fixed spont (01 pint) Oil can with fixed spont (01 pint) 200 200 ml capacity ml capacity 43 Sledge Hammer, 10 Kgs Sledge Hammer, 9 Kgs 44 Flat Chisel 235 mm, Taparia Flat Chisel 235 mm, Taparia 45 Cold Chisel, 2.5 inch Cold Octagonal Chisel, 32x300 mm 46 Wheel box Heavy duty solid 27 Box Spanner(Heavy Duty) 27x30 mm 47 Tyre Air pressure gauge or tyre inflators for heavy vehicle Make: Penta. Tyre Air pressure gauge or tyre inflators for heavy vehicle Make: Penta. 48 Triangular file (Smooth) 6 inch Triangular file (Smooth) 6 inch 49 Half round file (Rough) 12 inch Half round file (Rough) 12 inch 50 Drill bit 5 mm (Addison) Drill bit 5 mm (Addison) 51 Drill bit 6 mm (Addison) Drill bit 6 mm (Addison) 52 Ring Spanner set (Taparia D/E Ring Spanner set, 12 pcs, 6 to 32 /Jhalani) (Taparia /Jhalani)
53 Double end open spanner set D/E Open spanner set, 12 pcs, 6 to 32 (Taparia /Jhalani) (Taparia /Jhalani) 54 Water pump plier 250mm Water pump plier 250mm 55 Tyre lever heavy duty Tyre lever heavy duty 56 Electrician s box spanner set Electrician s Tool Kit 57 Crimping tool heavy duty Size: 45 Crimping tool (heavy duty)size: 10 sq. mm to 120 mm mm - 185 sq. mm 58 Screw driver Philips head No.2 6x200 mm Screw driver Philips head No.2, 6 x 200 mm 59 Screw driver two in one (PPN) 6x160 mm Make - Taparia / Jhalani Screw driver two in one (2 Philips; 6 x 0.8 mm), 6x200 mm Make: Taparia / Jhalani 60 Bearing puller 2 Leg Bearing puller 19mm to 35mm 19mm to 35mm 61 Bearing puller 2 Leg Bearing puller 35mm to 80mm 35mm to 80mm 62 Reamer set (Size:25mm to 50mm) Reamer set (Size: 25mm to 50mm) Make: Amba / Omega Make: Amba / Omega 63 Outside Micrometer(Size: 0 to 100mm) Outside Micrometer(Size: 0-25mm, 25-50mm, 50-75mm, 75-100mm - 4 Nos.) Inside Micrometer(Size: 0 to Inside Micrometer(Size: 50 to 200mm) 64 150mm) 65 Vernier Caliper (Size: 0 to 200 Vernier Caliper (Size: 0 to 200 mm) mm) 66 Vernier Caliper (Size: 0 to 600 Vernier Caliper (Size: 0 to 600 mm) mm) Make: Mitutoyo 67 Magnetic Base with attachments. Magnetic Base for Dial Indicator. Make: Superior Quality Make: Superior Quality 68 Dial Indicator(Size: 0 to 200 Dial Indicator(Size: 0 to 20 mm) Make: mm)make: Superior Quality Mitutoyo 69 Pop Rivet Gun Pop Rivet Gun 70 Torque Multiplier with Adaptor Torque Multiplier with Adaptor Upto 450 lbft. Assistant Engineer (P & S)