Sanitary Solutions Valves/Product Recovery System Catalog Distributed By:
Air Blow Check Valves SSABCV-Size-Alloy SSABCV-FNPT-Size-Alloy SSABCV-RHB-Size-Alloy Air Blow, Y-Ball, Check Valve Sanitary Solutions stocks T316L, 1.5 6.00 Air Blow Check Valves with either the 3/8 Air Line Coupler, ½ Female NPT or rubber hose barb connection. Sanitary Solutions Air Blow Check Valves are designed to evacuate lines of product or Clean in Place solutions and providing air movement to product in either a tank or other form of vessel. Sanitary Solutions Air Blow Check Valves comes standard with an EPDM/ Micron Filtered Disc Gasket, Stem Seat, washer/spring to conform to 3-A practices. 1-888-909-3569 or 1-855-640-7871
Air Blow Check Valve Material List
Spring Loaded Check Valve Size, Alloy & Heat Number on Valve Capped & Bagged for Protection Part #: SS45CV-Size-Alloy 4 Guide Fingers on Stem Sanitary Solutions stocks T316L, 1 6 Spring Loaded Check Valves that conform to 3-A practices. Our Spring Loaded Check Valve is designed to be used when flow in both directions create a problem. Spring Loaded Check Valves open when pressure below the valve seat is greater than above the valve seat. As the pressure equalizes, the valve closes. Sanitary Solutions spring loaded check valves have standardized on Viton Seats/ Seals, full flow plate, and can be serviced in the field easily. Sanitary Solutions can supply you with fractional (1/2 & ¾ ) sizes, please contact us or e-mail us for price and availability.
Spring Loaded Check Valve Product Specifications A B OAL Cracking (PSI) 1.00 0.870 1.688 4.125 1.682 Size Tube O.D. 1.50 1.370 1.688 4.563 0.678 2.00 1.870 2.175 5.062 0.364 2.50 2.370 2.770 5.375 0.227 3.00 2.870 3.240 6.125 0.618 4.00 3.834 4.034 8.188 0.346 6.00 5.782 6.400 6.250 0.158 Features: Repair Kits Consist of: (1) each: 15 F to 195 F: Operating Temperature Flow Plate, Stem, SS Spring, 140 PSI: Maximum Operating Pressure Viton Body Gasket Meets 3-A Specifications Viton Seats & Seals Repair Kit Part # Field Serviceable SS45CV-RK-Size www.sanitarysolutionsinc.com
Spring Loaded Check Valve Product Breakdown
Sanitary Y-Ball Check Valve 4 Size is Available Buna Ball Standard Polish ID/OD to 3A Standards Features: IN STOCK Sizes: 1.5, 2, 2.5, 3, 4 Temperature Range: 15 F to 195 F Stocking a 6 Air Blow Check Repair Kits Consist of: (1) each: Buna Ball & EPDM Gasket Teflon, Viton Ball is comming No Special Tools Repair Kit Part # Maximum Operating Pressure: 145 PSI SSYBCV-RK-Size 1-888-909-3569 or 1-855-640-7871
Sanitary Y-Ball Check Valve Product Specifications Tube OD (size) A Weight Y-Ball Check Valve Size Air Blow Check Valve Size 1.5 8.625 3.100 1.5 2 2 10.09 3.330 2 2.5 2.5 11.50 7.750 2.5 3 3 12.37 10.25 3 4 4 18.00 42.10 4 6
Sanitary Y-Ball Check Valve Product Specifications Item # Description Material Quantity 1 Ball Buna (standard) 1 2 Valve Body T316L 1 3 Gasket EPDM 1 4 End Cap T316L 1 5 Clamp T304 1 www.sanitarysolutionsinc.com
Two-Way Encapsulated (Cavity Filled) Clamp End Ball Valve Size, Alloy, Heat Number 100% Full Opening SSEBVC-Size-T316L Features: Sizes: ½ 4 ISO 5211 Mount Pad Blow-out Proof Stem Lockable Handle 320 Grit ID/180 Grit OD Full Port Design Live-loaded Stem Packing Cavity Filled Seat Three Piece design for Field service Capped & Bagged for Protection Repair Kits Consist of: (1) each: One (1) Thrust Washer Two (2) Valve Seal O-Rings Two Belleville Washers Note: We stock Ball Valve Handle Repair Kits
Two Way Encapsulated Clamp End Ball Valve Product Dimensions A B C D E Break Torque Tube ISO Weight OD (size) 5211 ½ 0.500 0.995 3.335 2.220 4.270 32 F03/F04 1.760 ¾ 0.750 0.995 3.524 2.900 4.270 45 F03/F04 2.070 1 1.000 1.980 4.440 3.250 5.810 71 F04/F05 2.870 1.5 1.500 1.980 5.560 4.000 7.750 173 F05/F07 5.730 2 2.000 2.520 6.190 4.440 8.060 230 F07/F10 7.500 2.5 2.500 3.050 7.190 5.250 10.60 460 F07/F10 13.44 3 3.000 3.580 8.690 5.960 10.81 460 F10/F12 20.28 4 4.000 4.690 10.69 6.500 10.81 575 F10/F12 33.07 No Expediting Charges/Same Day Shipping
Bulldog Valves...Bulldog Tough. T Part Part Quantity Material # 1 Body 1 T316L SS ASTM A351 CF-8M 2 Ends 2 T316L SS ASTM A351 CF-8M 3 Ball 1 T316L SS ASTM A351 CF-8M 4 Stem 1 T316L SS ASTM A351 CF-8M 5 Valve Seat 2 TFM/ Cavity Fill PTFE 6 Valve Seal 2 PTFE 7 Thrust Bearing 1 PTFE 8 Stem Packing 1 PTFE 9 Gland Packing 1 T304 SS 10 Belleville Washer 2 T304 SS 11 Packing Nut 1 T304 SS 12 Lock Tab 1 T304 SS 13 Handle 1 T304 SS 14 Lock Washer 1 T304 SS 15 Handle Nut 1 T304 SS 16 Sleeve 1 PVC 17 Body Bolts 4 T304 SS 18 Bolt Washers 4 T304 SS 19 Nut 4 T304 SS 20 Stop Pin 1 T304 SS
Two Way Encapsulated Seat Ball Valve Product Breakdown
(HOT) High Temperature/Pressure Clamp End Ball Valve Features: Sizes: ½ 4 (T316L) 25% Carbon + 75% PTFE For Higher Temperatures/Pressure Applications and a higher cycle life than PTFE or RTFE. ISO 5211 Mount Pad Blow-out Proof Stem Lockable Handle 320 Grit ID/180 Grit OD Full Port Design Live-loaded Stem Packing Cavity Filled Seat /Three Piece Design for Field Service www.sanitarysolutionsinc.com
(HOT) High Temperature/Pressure Ball Valve Dimensions Size A B C D E F CV ½ 4.900 1.500 4.300 0.354 F03 F04 8 ¾ 4.764 1.800 4.700 0.354 F03 F04 29 1 5.394 2.100 4.900 0.433 F04 F05 66 1.5 7.165 2.700 5.600 0.551 F05 F07 192 2 7.165 3.100 6.400 0.551 F05 F07 434 2.5 14.57 3.800 7.800 0.669 F07 F10 723 3 14.57 4.200 9.000 0.669 F10 F12 1124 4 15.75 5.300 9.500 0.866 F10 F12 2100 www.sanitarysolutionsinc.com
(HOT) High Temperature Ball Valve Product Breakdown
(HOT) High Temperature Ball Valve Seat Materials/Charts
T316L, 1-4 Three Way T-Port Encapsulated Seat Clamp End Ball Valve Three RED Arrows to Indicate Flow Capped and Bagged for Protection Locking Handle/ISO 5211 Mount Pad Full Port/Cavity Filled Seats POSITION TURN A & B 90 B & C 90 C & D 90 D & A 90 A & B & C 180 B & C & D 180 C & D & A 180 D & A & B 180 A & B & C 360 & D
THREE WAY T-PORT BALL VALVE DIMENSIONS TOP VIEW SIDE VIEW Tube O.D. Size D C D L E H H1 H2 W ISO 5211 1 0.870 1.709 1.980 6.299 0.433 3.268 2.047 0.394 6.299 F04/F05 1.5 1.370 1.709 1.980 7.205 0.551 3.858 2.559 0.551 8.268 F05/F07 2 1.882 2.220 2.520 8.504 0.669 4.724 3.150 0.551 9.843 F07/F10 2.5 2.370 2.780 3.051 9.488 0.748 5.709 4.015 0.709 9.843 F07/F10 3 2.882 3.140 3.576 11.00 0.860 8.000 6.250 0.889 13.00 F12 4 3.862 4.250 4.653 12.75 0.863 8.500 6.375 1.170 13.00 F12 T PORT PART NUMBER EXAMPLE WHEN ORDERING: SSEBVC3T-SIZE-316L 1-888-909-3569 or 1-855-640-7871
THREE WAY T-PORT BALL VALVE PRODUCT BREAKDOWN NUMBER NAME of PART MATERIAL 1 Bonnet ASTM A351 CF8M 2 Seat PTFE + 15% FV 3 Ball ASTM A182 316 4 Body ASTM A351 CF8M 5 Stem Gasket TEFLON 6 Ant-Static Device ASTM A276 T304 7 Stem ASTM A276 T316 8 Butterfly Spring ASTM A276 T304 9 Thrust Washer ASTM A276 T304 10 Stem Nut ASTM A276 T304 11 Name Plate ASTM A276 T304 12 Packing Gland ASTM A276 T304 13 Packing TEFLON 14 O-Ring VITON 15 Gasket TEFLON 16 Hex Nut ASTM A276 T304 17 End Cap ASTM A351 CF8M 18 Handle ASTM A276 T304 19 Handle Lock ASTM A276 T304 20 Pin Plastic No Expediting Charges/Same Day Shipping
T316L, 1-4 Three Way L-Port Encapsulated Seat Clamp End Ball Valve Two RED Arrows to Indicate Flow Capped and Bagged for Protection Locking Handle/ISO 5211 Mount Pad Full Port/Cavity Filled Seats POSITION TURN A & B 90
THREE WAY L-PORT BALL VALVE DIMENSIONS TOP VIEW SIDE VIEW Tube O.D. Size D C D L E H H1 H2 W ISO 5211 1 0.870 1.709 1.980 6.299 0.433 3.268 2.047 0.394 6.299 F04/F05 1.5 1.370 1.709 1.980 7.205 0.551 3.858 2.559 0.551 8.268 F05/F07 2 1.882 2.220 2.520 8.504 0.669 4.724 3.150 0.551 9.843 F07/F10 2.5 2.370 2.780 3.051 9.488 0.748 5.709 4.015 0.709 9.843 F07/F10 3 2.882 3.140 3.576 11.00 0.860 8.000 6.250 0.889 13.00 F12 4 3.862 4.250 4.653 12.75 0.863 8.500 6.375 1.170 13.00 F12 L PORT PART NUMBER EXAMPLE WHEN ORDERING: SSEBVC3L-SIZE-316L 1-888-909-3569 or 1-855-640-7871
THREE WAY L-PORT BALL VALVE PRODUCT BREAKDOWN NUMBER NAME of PART MATERIAL 1 Bonnet ASTM A351 CF8M 2 Seat PTFE + 15% FV 3 Ball ASTM A182 316 4 Body ASTM A351 CF8M 5 Stem Gasket TEFLON 6 Ant-Static Device ASTM A276 T304 7 Stem ASTM A276 T316 8 Butterfly Spring ASTM A276 T304 9 Thrust Washer ASTM A276 T304 10 Stem Nut ASTM A276 T304 11 Name Plate ASTM A276 T304 12 Packing Gland ASTM A276 T304 13 Packing TEFLON 14 O-Ring VITON 15 Gasket TEFLON 16 Hex Nut ASTM A276 T304 17 End Cap ASTM A351 CF8M 18 Handle ASTM A276 T304 19 Handle Lock ASTM A276 T304 20 Pin Plastic No Expediting Charges/Same Day Shipping
T304 1.5 4 Dual Purge Port Ball Valves Sanitary Solutions stocks a full port, cavity filled, T304 clamp connection dual purge port ball valve. Our dual purge port ball valve is constructed with a full port positioned inside the valve body between two polished flanges and two Teflon valve seats. Take a moment to review the two purge ports located at the bottom of the valve for full drain ability, taking samples, and CIP/SIP applications. Our dual purge port ball valve is 100% full opening, and equipped to take a maximum pressure of 200 PSI and temperature from 60 F to 300 F as well as maintaining a full flow rate with a minimum pressure drop. In case of a tight situation or if your valve is close to a wall and will not open or close, you can remove the handle and re-position to open or close the valve. Please go to the www.sanitarysolutions.com for more information or contact us at 1-888-909-3569 or 1-855-640-7871. www.sanitarysolutionsinc.com
T304 Dual Purge Port Ball Valve Dimensions Tube O.D Size D A B C L 1.5 3.937 4.528 1.370 1.988 6.299 2.0 4.331 5.157 1.870 2.520 7.480 2.5 5.118 6.299 2.370 3.051 8.268 3.0 5.512 7.323 2.870 3.583 9.843 4.0 6.692 8.661 3.835 4.685 12.60 DUAL Purge Port Ball Valve PART NUMBER EXAMPLE WHEN ORDERING: SSPPBV-SIZE-304 1-888-909-3569 or 1-855-640-7871
T304 Dual Purge Port Ball Valve Product Breakdown Item Description Material Qty. S Bolt T304 1 2 Rotating T304 1 Shaft 3 Spring T304 2 4 Handle T304 1 5 Locating T304 1 Sleeve 6 Stem Teflon 1 Packing 7 Stem T304 1 8 Bolt T304 3 9 Nut T304 1 10 Washer Teflon 1 11 Valve Body T304 1 12 O-Ring Buna 1 Seal 13 Seat Teflon 1 14 Gasket T304 1 15 Ball Seat T304 1 16 Seat Teflon 1 17 O-Ring Buna 1 Seal 18 Valve Body T304 1 19 Bolt T304 3 20 Washer Teflon 1 21 Nut T304 1 22 Hex Deck T304 1 Bolt 23 Hex Deck Bolt T304 1
T316L 1 4 Actuated Butterfly Valve Air to Open/Spring to Close NEMA 4 for Wash down 800K Cycle Tested Compact Design Sanitary Solutions stocks T316L Air to Open/Spring to Close Actuated Butterfly Valves in a compact design. For your convenience, we stock a standard Silicone seat, but we also offer an EPDM or Viton seat. We also stock the canister to fit the valve and two types of air connections. If you have a requirement for a compact design, NEMA 4 wash down, polished actuated butterfly valve, we are your solution whether it be for a beverage, food or pharmaceutical application.
T316L 1 4 Actuated Butterfly Valve Dimensions Tube O.D. A B C Size ½ 3.347 5.827 2.697 ¾ 3.347 5.827 2.697 1 3.347 5.827 2.697 1.5 3.347 5.827 2.697 2 3.347 5.827 3.047 2.5 3.347 5.827 3.457 3 3.347 5.827 3.638 4 3.347 5.827 4.488 Actuated Butterfly Valve PART NUMBER EXAMPLE WHEN ORDERING: SSABFV-SIZE-316L 1-888-909-3569 or 1-855-640-7871
T316L 1 4 Actuated Butterfly Valve Material Lists
T316L Four Position Clamp End Butterfly Valves T316L/ Clamp Ends (ABS) Black Ball/100% Tested (4) Positions for Throttling Silicone, EPDM or Viton Seats Features of the Four Position Clamp End Butterfly Valves: Silicone Seat (standard) EPDM and Viton Handle interchangeable to either side Field Serviceable Operating temperature: 15 F to 195 F Sanitary polished to a 32Ra or better on all wetted surfaces 100% Hydraulic Pressure Tested Repair Kits available consisting of seat and bushings No Expediting Charges/Same Day Shipping
T316L Four Position Clamp End Butterfly Valve Dimensions Tube OD Size Information below is based on ambient temperature or 68 F A B C D E F Break PSI Torque (in lbs.)silicone 1 4.409 2.799 1.358 0.866 3.512 0.874 20 140 23 1.5 4.409 2.799 1.358 0.866 3.512 1.370 40 140 80 2 4.409 3.098 1.358 0.866 3.780 1.870 55 140 230 (CV) 2.5 4.409 3.500 1.358 0.866 3.827 2.370 70 110 264 3 6.221 3.799 1.339 1.181 4.134 2.866 165 110 372 4 6.221 4.500 1.339 1.181 4.819 3.830 350 85 800 6 11.02 5.382 1.406 1.181 5.512 5.780 700 60 1200 8 17.64 6.811 1.406 1.181 4.882 7.782 N/A 60 2800 Four Position Butterfly Valve PART NUMBER EXAMPLE WHEN ORDERING: SSBFVF-SIZE-316L www.sanitarysolutionsinc.com
T316L Four Position Clamp End Butterfly Valve Material List
T304 Multi-Position Clamp End Butterfly Valve Grooved Handle for gripping T304/ EPDM Seat (standard) 100% Pressure Hydraulic Test Sanitary Polish to 32 Ra Features of the Multi-Position Clamp End Butterfly Valves: EPDM Seat (standard) Silicone and Viton Handle interchangeable to either side Field Serviceable Operating temperature: 15 F to 195 F Sanitary polished to a 32Ra or better on all wetted surfaces 100% Hydraulic Pressure Tested Repair Kits available consisting of seat and bushings 1-888-909-3569 or 1-855-640-7871
T304 Multi-Position Clamp End Butterfly Valve Dimensions Tube OD Size A B C D E F Break Torque (in lbs.)epdm (PSI.) Rating Flow Coefficient (CV) 1 6.649 3.016 1.724 0.866 3.512 0.874 75 140 23 1.5 6.649 3.016 1.724 0.866 3.512 1.370 130 140 80 2 6.649 3.358 1.724 0.866 3.780 1.870 165 140 230 2.5 6.649 3.732 1.724 0.866 3.827 2.370 210 110 264 3 6.649 3.969 1.724 1.181 4.134 2.866 350 110 372 4 6.649 4.766 1.724 1.181 4.819 3.830 540 85 800 Multi-Position Butterfly Valve PART NUMBER EXAMPLE WHEN ORDERING: SSBFV-SIZE-304
T304 Multi-Position Clamp End Butterfly Valve Product Breakdown
T304 Black Plastic Clamp End Butterfly Valve T304/Economical Price Black Plastic Handle Multiple Positions EPDM Seat (standard) Features of the Black Plastic Clamp End Butterfly Valves: Economical Price for all sizes from 1.5 4.00 Maximum Operating Pressure: 85 PSI Handle interchangeable to either side Field Serviceable Operating temperature: 15 F to 195 F Sanitary polished to a 32Ra or better on all wetted surfaces 100% Hydraulic Pressure Tested
T304 Black Plastic Clamp End Butterfly Valve Dimensions Tube O.D. Size A B C D H L Break Torque (in lbs.)epdm (PSI.) Rating Flow Coefficient (CV) 1 3.500 1.000 3.500 1.750 2.165 6.102 75 140 23 1.5 3.750 1.500 3.500 1.750 2.165 6.102 130 140 80 2 4.370 2.000 3.688 1.940 2.165 6.102 165 140 230 2.5 4.750 2.500 3.750 1.875 2.165 6.102 210 110 264 3 5.250 3.000 4.067 2.034 2.165 6.102 350 110 372 4 6.380 4.000 4.750 2.375 2.165 6.102 540 85 800 Black Plastic Butterfly Valve PART NUMBER EXAMPLE WHEN ORDERING: SSBFVPE-SIZE-304
Three Way METAL Plug Valve, T304 T304/NEW SS Metal Plug Polished to a 32 Ra ID/OD Finish Chemical, Dairy, Food Industries Low Pressure/Temperature Uses Features of the Three Way METAL Plug Valve: Repair Parts in Stock: Wing Nut and NEW Metal Plug T304/ Clamp Ends are Standard Polish to a 3A sanitary Finish Stock Sizes: 1.5, 2, 3 Made for Low Pressure and Temperature Uses Temperatures to 95 F and pressures under 25 psig Note: Plug Valves are subject to leakage from the first time they are installed due to cleaning, maintenance and normal operation.
T304 Three Way METAL Plug Valve Dimensions Tube A B C D E Weight OD Size 1.5 2.908 5.813 7.005 5.635 2.550 9.00 2 3.407 6.813 7.633 5.635 2.880 15.00 3 4.781 9.438 9.750 7.250 3.750 36.10 Three Way Metal Plug Valve PART NUMBER EXAMPLE WHEN ORDERING: SS11MPM3Way-SIZE-304 E-Mail Confirmation with Tracking Number to you Live People Answering your call
Three Way RUBBER Plug Valve, T304 Polished to a 32 Ra ID/OD Finish T304/NEW SS Rubber Plug Low Pressure/Temperature Uses Chemical, Dairy, Food Industries Features of the Three Way Rubber Plug Valve: Repair Parts in Stock: Wing Nut and NEW Rubber Plug T304/ Clamp Ends are Standard Polish to a 3A sanitary Finish Stock Sizes: 1.5, 2, 3 Made for Low Pressure and Temperature Uses Temperatures to 95 F and pressures under 25 psig Note: Plug Valves are subject to leakage from the first time they are installed due to cleaning, maintenance and normal operation. www.sanitarysolutionsinc.com
T304 Three Way RUBBER Plug Valve Dimensions Tube A B C D E Weight OD Size 1.5 2.908 5.813 7.005 5.635 2.550 8.00 2 3.407 6.813 7.633 5.635 2.880 13.00 3 4.781 9.438 9.750 7.250 3.750 34.10 Three Way Rubber Plug Valve PART NUMBER EXAMPLE WHEN ORDERING: SS11MPR3Way-SIZE-304 www.sanitarysolutionsinc.com 1-888-909-3569 or 1-855-640-7871
T304 Sample Valves T304/Polish 32 Ra OD Double Silicone O-Rings Features of the T304 Sample Valves: Stocked in Sizes 3/8 x 1 & ½ x ½ x 1 T304 Stainless Steel Found in the Beverage Industry Polished to a Sanitary Finish on the OD Temperature Rating: 295 at 195 PSI Double Silicone O-rings 1 Clamp Size x 0.375 or 0.50 Barb No Expediting Charges/Same Day Shipping www.sanitarysolutionsinc.com 1-888-909-3569 or 1-855-640-7871
T304 Sample Valve Dimensions Tube OD (Size) A B C Weight 1 x 0.375 3.851 0.345 0.380 1.00 1 x 0.50 3.851 0.345 0.500 1.00 Sample Valve PART NUMBER EXAMPLE WHEN ORDERING: SSSV-SIZE-304 E-Mail Confirmation with Tracking Number to you Live People Answering your call www.sanitarysolutionsinc.com
T304 Air Relief Valve Easy Assembly without tools Ball/Gaskets Replaceable Features of the T304 Air Relief Valve Stocking the 1.5 & 2 with 180 Elbow Valve seals for vacuum and pressure PSI: 140 Maximum Operating temperature: 210 F (maximum) Polypropylene Valve Ball is standard PTFE is available No special tools 1-888-909-3569 or 1-855-640-7871
T304 Air Relief Valve Dimensions Tube OD A C E Size 1.5 2.516 4.488 0.370 2 3.047 4.488 0.370 Air Relief Valve PART NUMBER EXAMPLE WHEN ORDERING: SSARV-SIZE-304 E-Mail Confirmation with Tracking Number to you Live People Answering your call
T316L Rotating Spray Ball Features of the T316L Rotating Spray Ball: 360 Spray Pattern ¾ NPT, 1.5 NPT, 1.5 Clamp Connections Used to clean tanks or vessels Ball Bearings are made from Stainless Steel OD Mirror Finish 1-888-909-3569 or 1-855-640-7871 www.sanitarysolutionsinc.com
T316L Rotating Spray Ball Dimensions Tube OD Size Connection A B ¾ NPT ¾ NPT 5.460 1.5 NPT 1.5 NPT 5.460 1.5 Clamp 1.980 5.460 Rotating Spray Ball PART NUMBER EXAMPLE WHEN ORDERING: SSRSB-SIZE-Connection-316L
T316L Stationary Spray Ball Features of the T316L Stationary Spray Ball: Multiple spray patterns for your needs Found in the beverage, beer, food and pharmaceutical industries Fixed and ready to be placed to a pipe or tube Spray Pattern: 180 Bottom, 180 Top, 360 T316L/Polished to a Sanitary Finish E-Mail Confirmation with Tracking Number to you Live People Answering your call 1-888-909-3569 or 1-855-640-7871 www.sanitarysolutionsinc.com
T316L Stationary Spray Ball Dimensions Tube OD Size Spray Pattern A B C D E Pin Size Pin Length 1 180 Bottom 2.95 3.54.445 1.005.975.226 1.47 1.5 180 Bottom 2.95 3.54.445 1.005.975.226 1.95 1 360 Pattern 3.04 2.50.445 1.005.975.226 1.47 1.5 360 Pattern 3.55 2.95.445 1.005 1.05.226 1.95 1 180 Top 2.95 3.54.445 1.005.975.226 1.47 1.5 180 Top 2.95 3.54.445 1.005.975.226 1.95 Stationary Spray Ball PART NUMBER EXAMPLE WHEN ORDERING: SSSSB-SIZE-Spray Pattern-316L
T316L Product Recovery Systems T316L Sizes 1.5-4.00 PIG & Retriever Handle PIG Launcher Pig Retriever
T316L Product Recovery Systems Sanitary Solutions Part # SSPRS- 1.5-316L SSPRS- 2-316L SSPRS- 2.5-316L SSPRS- 3-316L SSPRS- 4-316L Tube OD Size A B C D E F 1.5 11.69 8.938 5.063 10.50 1.469 2.813 2 13.81 10.38 5.906 11.50 1.968 3.531 2.5 16.00 11.66 7.094 12.00 2.425 4.438 3 18.25 12.47 7.563 12.25 2.925 5.625 4 20.50 13.63 9.343 12.25 3.934 6.250 Features: Handling Viscous Products Faster Changeovers, Fewer Washouts A Pig that will pass through elbows and tees Meets all 3A requirements
We, at Sanitary Solutions, take pride in expanding our line of Sanitary Valves to you. Upon listening to many of you, we have tried to add more technical information, answer the basic questions, provide dimensional information and industries where each of the valves are found. It is our goal to provide you with stock to fill your orders each and every time and to give you products that you can trust and promote. Yes, we will be adding more valve products in the future and welcome your input as to valves that you feel would fill a void and assist you in your efforts to sell our products. We are seeing a trend that other competitors are dropping various valves for various reasons and we are here to fill that void for both you, our distributor and the customers that you assist. Please feel free to contact our sales team as to any ideas of new or discontinued products so we can discuss and come to a happy median. As we move forward, it is our hope to grow the valve and to add various new products throughout the year that will aid your sales efforts. Yes, we will contact you by e-mail when the products are in stock and our sales team will contact you personally with all the particulars on the product. The Sanitary Sales team looks forward to your call so as opportunities arise, please call us toll free below or check us out via: www.sanitarysolutionsinc.com 1-888-909-3569 or 1-855-640-7871