SGHAC33 February 2015 HE, HH, LA/LH Series Evaporator Coils Specification Guide Contents... Pa Page HE Series ACoils Features... 2 Nomenclature... 3 Specifications... 4 Pallet Quantities... 14 HH Series Horizontal Slab Coils Features & Nomenclature... 16 Specifications... 17 LA/LH Series Large Tonnage A and H Coils Features & Nomenclature... Specifications... 19 Product improvement is a continuous process at Advanced Distributor Products. Therefore, product specifications are subject to change without notice and without obligation on our part. Please contact your ADP representative or distributor to verify details. by Advanced Distributor Products. All rights reserved. 2175 West Park Place Blvd., Stone Mountain, GA 087 www.adpnow.com
HE Series Product Features High efficiency lanced fin design. Nohassle 5 year warranty. R22, R410A, AC & Heat Pump compatible. All coils have durable packaging with bar coded labels on the box. Threaded expansion valves available factory installed or as a field installed kit. Coils are air pressure tested at 0 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air. Piston options include externally accessible body for easy piston change out and/or TXV installation. Liquid line refrigerant connections are 3/8" ODF. Suction line refrigerant connections are 3/4" ODF (ACoil size models) or 7/8" ODF (ACoil size models & all Horizontal SlabCoils). Suction line refrigerant connections are 1.125" on slab numbers E43, E, E56, and E65 for size models and higher. Copper refrigerant connections for easy brazing on both copper and aluminum slab models. Cased coils have heavy gauge embossed galvanized cabinets fully lined with 5/8" foil faced insulation. Optional painted cabinets. Corrosion resistant coil header plates. All ACoils are upflow or downflow capable. All multiposition coils are upflow, downflow, and left or right airflow capable. Cabinet insulation hold down tabs for easy drain pan removal. Interlocking doors reduce air leakage and allow for easy access. Enhanced refrigerant pipe grommets: secure, tight, and easy to install. Intertek lab tested 1% or less cabinet air leakage for better efficiency. Foam drain seal for reduced air leakage. Noncaptive refrigerant lines with long stubs make for easy installation. All multiposition coils are field convertible from horizontal righttoleft airflow and horizontal lefttoright airflow. Dual 3/4" FPT condensate drains on frontleft and frontright side of drain pans. UV resistant drain pans are molded of high temperature (4 deg. F) engineered polymer. Microban antimicrobial additive to inhibit the growth of mold and mildew in the drain pan. HydroTEC low water retention drain pan. Expansion valve with improved temperature sensing: 1. Mounted inside cabinet to prevent external sweating 2. Bulb clamped standard factory installed 3. Wrapped bulb optional factory installed WARNING Face velocity above 3 ft/min. is not recommended for downflow or counterflow applications due to potential water blowoff. 2
HE Series Nomenclature H G 2 C 145 B 12 05 AP Cabinet Color Piston Size [1] H = Embossed AP = TXV access port [2] A = Armstrong MBTUH R22 R410A D = Ducane/AireFlo G = ICP J = Goodman/Amana L = Lennox N = Nordyne P = Carrier/Bryant/Payne R = Rheem/Ruud T = Trane/American Std. 12 = = = = = = = = 41 59 67 73 80 84 93 41 49 59 67 73 76 93 Y = York/Luxaire/Coleman [1] Piston will always be sized to match the nominal BTU rating of the coil. Slab Number [2] TXV access port standard on E & A = Copper slab factory installed TXVs; G & B = Aluminum slab optional on piston models. Metering Device 1 = Piston (R410A) Product Code [3] 2 = Piston (R22) 00 = Righthand uncased 3 = Bleed A/C TXV (R22) 01 = Righthand cased 4 = Nonbleed A/C TXV (R22) 04 = Lefthand uncased 5 = Nonbleed HPA/C TXV (R22) 05 = Lefthand cased 6 = Nonbleed A/C TXV (R410A) 20 = Righthand cased multiposition 9 = Nonbleed HPA/C TXV (R410A) 22 = Lefthand cased multiposition [3] Refrigerant connections and exposed Nominal MBTUH drain connections are both on the left or right side as indicated. Cabinet Depth A = Uncased D = 21.0" C = 20.5" E = 21.5" Cabinet Height 00 = Uncased Note: Cabinet height not a selectable Width 12 = 12.5" option, see cased dimensions. Cased Uncased 16 = 16.5" 1 = 14" 1 = 13" =.5" (up to 31.5") 1 = 14.25" 1 = 14" 145 = 14.5" 155 = 15.5" 175 = 17.5" 170 = 17" Cabinet Upper Notch 210 = 21" 200 = 20" A = Uncased 5 =.5" 205 = 20.5" B =.75" (standard) 255 = 25.5" 235 = 23.5" 251 = 25.1" 3
A = Width B = Depth C = Height (excluding 3/4" top flange) C HE Series Specifications Supply Opening: (A 1.5") x (B 1.5") Return Opening: (A 1.0") x (B 0.5") A B Slab [1] Number (A,B) 01 (A,B) 02 (A,B) 03 (A,B) 04 (A,B) 05 (A,B) 06 (A,B) 07 (A,B) 08 (A,B) 09 (A,B) 10 (A,B) 11 (A,B) 12 (A,B) 13 Nominal MBTUH [1] E & A = Copper slab; G & B = Aluminum slab. Cased Dimensions Width [A] Depth [B] (1/4" increments) (1/2" Vertical MultiPosition increments) Vert 13.25" 20.00" 13.25" 20.00" 13." 20.25" 13." 20.25" 20.5" 21.5" 20.5" 21.5" 12.5" 13.25"." 13."." 20.5" 21.5" 16.5" 14.25"." 14."." 13.25".75" 13.".75" 14.25".75" 14.".75" 20.5" 21.5" 15.75".75" 16.00".75" 13.25".75" 13.".75" 14.25".75" 14.".75" 15.75".75" 16.00".75" 20.5" 21.5" 20.5" 17.25".75" 17.".75" 14.25".75" 14.".75" 15.75".75" 16.00".75" 20.5" 21.5" 17.25".75" 17.".75" ** 14.25".75" ** 14.".75" ** 15.75".75" ** 16.00".75" 17.25".75" 17.".75" 20.5" 21.5" ** 25.5" 20.25".75" 20.".75" 13.25" 17." 13.25" 21.00" 13." 17.75" 13." 21.25" 20.5" 21.5" 20.5" 21.5" 12.5" 16.5" 13.25" 21.00" 13." 21.00" 20.5" 21.5" 16.5" 14.25" 21.00" 14." 21.00" 14.25".75" 14.".75" 15.75".75" 16.00".75" 14.25".75" 14.".75" 15.75".75" 16.00".75" 20.5" 21.5" 20.5" 17.25".75" 17.".75" 14.25".75" 14.".75" 15.75".75" 16.00".75" 20.5" 21.5" ** 25.5" 17.25".75" 17.".75" Height [C] Multi Pos 16.5" 25.5" 25.5" ** 25.5" 16.5" 16.5" Notes 16.5" 16.5" 16.5".5" 20.5" 20.5" 16.5" ** 25.5" ** If cabinet width is 17" or less for upflow or 17.25" for multiposition, cabinet height must be 27.5". 20.5" 21.5".5" 20.5" 20.5" ** 22.5" height available in H, R & T colors. 4
C HE Series Specifications A = Width B = Depth C = Height A B Slab [1] Number (A,B) 01 (A,B) 02 (A,B) 03 (A,B) 04 (A,B) 05 (A,B) 06 (A,B) 07 (A,B) 08 (A,B) 09 (A,B) 10 (A,B) 11 (A,B) 12 (A,B) 13 Nominal MBTUH [1] E & A = Copper slab; G & B = Aluminum slab. [2] Face velocity above 3 ft/min not recommended for downflow applications due to potential water blowoff. CFM Uncased Dimensions and Airflow Data Face Vel. [2] (fpm) Wet Coil Air Pressure Drop (inches W.C.) Pan Coil Copper Slab by Drain Pan Width [A] Depth Height 13" 14" 15.5" 17" 20" 20.5" 23.5" 25.12" [B] [C] Unc Vert MP 0 270.16.14.12.09 800 3.21.19.16.10 0 2.15.13.10.09 800 299..15.13.12 1000 375.22.20..17 800 257.17.13.10.09 1000 321.23.17.15.14 1200 6.23.20.19 1000 281.21.16.14.12.09 1200 337.22.20.17.16 10 393..22.20 1000 2.19.14.13.10.09 1200 0.21.17.17.15 10 3.25.20. 10 0..22 1200 270.19..16.12 10 315..19.15 10 3..20 1200 225...14.06 10 3.23.20.16 10 0.23.19 2000 375.25 0 270.20..15 800 3.25.20. 0 2.19.14.11.09 800 299.22.17.13.12 1000 375.25.21.17.16 800 257.17.13.11.09 1000 321.23.17.15.12 1200 6.23.21.19 1200 337.22.20.16.15 10 393..20.19 1200 0.21.19.17.09 10 3.25.20.16 10 0..22 1200 270.19..16.12 10 315..19.17 10 3..23 19.5" 11" 19.5" 13" 19.5" 15" 19.5" 17" 19.5" 19" 19.5" 21" 19.5" 25" 19.5" 11" 19.5" 13" 19.5" 15" 19.5" 17" 19.5" 19" 19.5" 21" 17 19 22 27 34 21 23 33 25 39 32 27 33 Weights 35 37 45 55 33 37 52 56 Unc Vert 14 15 19 22 27 17 21 29 Alum Slab 20 31 29 32 35 22 34 37 MP 28 32 35 45 5
HE Series Specifications Slab [1] Number (A,B) 14 (A,B) 15 (A,B) 91 (E,G) 20 (E,G) 21 (E,G) 22 (E,G) 23 (E,G) (E,G) 25 (E,G) (E,G) 27 (E,G) (E,G) 31 (E,G) 32 (E,G) 33 (E,G) 34 Nominal MBTUH [1] E & A = Copper slab; G & B = Aluminum slab. Cased Dimensions Width [A] Depth [B] (1/4" increments) (1/2" Vertical MultiPosition increments) Vert 14.25".75" 14.".75" 15.75".75" 16.00".75" 17.25".75" 17.".75" 20.25".75" 20.".75" ** 14.25".75" ** 14.".75" ** 15.75".75" ** 16.00".75" 17.25".75" 17.".75" 20.5" 21.5" ** 25.5" 20.25".75" 20.".75" 25.".75" 13.25" 20.00" 13." 20.25" 21.0" 21.5" 20.5" 21.5" 25.5" 12.5" 13.25" 20.00" 13." 20.25" 20.5" 21.5" ** 16.5" 13.25"." 13."." 20.5" 21.5" 16.5" 14.25"." 14."." 13.25".75" 13.".75" 20.5" 21.5".5" 14.25".75" 14.".75" 15.75".75" 16.00".75" 14.25" 21.00" 14." 21.25" 15.75".75" 16.00".75" 17.25".75" 17.".75" 14.25" 21.00" 14." 21.25" 15.75".75" 16.00".75" 17.25".75" 17.".75" 15.75".75" 16.00".75" 17.25".75" 17.".75" 20.25".75" 20.".75" ** 15.75".75" ** 16.00".75" 17.25".75" 17.".75" 20.25".75" 20.".75" 13.25" 21.00" 13.25" 21.00" 14.25" 21.00" 13." 21.25" 13." 21.00" 14." 21.00" 14.25"." 14.25"." 14."." 14."." 14.25".75" 14.".75" 14.25".75" 14.".75" 15.75".75" 16.00".75" 20.5" 21.5" 20.5" 21.5" ** 25.5" 13.25" 17." 13." 17.75" 20.5" 21.5" 12.5" 20.5" 21.5" ** 16.5" Height [C] Multi Pos ** 25.5" ** 25.5" 16.5" ** 16.5" Notes 20.5" 21.5" 25.5" 25.5" 16.5" 20.5" 20.5" 21.5" 20.5" 20.5" ** 25.5" 20.5" 21.5" ** 25.5" ** 25.5" ** 25.5" ** If cabinet width is 17" or less for upflow or 17.25" for multiposition, cabinet height must be 27.5". Not available in multiposition. ** 16.5" height available in all colors. ** 16.5" ** 14.5" height available in P color (D & ** 25.5" height available in all colors. ** 22.5" height avail in H, R & T colors. ** 21.5" height available in P color (D & ** 16.5" height available in all colors. ** 14.5" height available in P color (D & 20.5" 21.5" 16.5" 16.5" 20.5" 21.5".5" 20.5" 20.5" 21.5" 20.5" 20.5" 16.5" ** 25.5" height available in all colors. **.5" height available in P color (D & ** If cabinet width is 17" or less for upflow or 17.25" for multiposition, cabinet height must be 27.5". 6
HE Series Specifications Slab [1] Number (A,B) 14 (A,B) 15 (A,B) 91 (E,G) 20 (E,G) 21 (E,G) 22 (E,G) 23 (E,G) (E,G) 25 Nominal MBTUH [1] E & A = Copper slab; G & B = Aluminum slab. [2] Face velocity above 3 ft/min not recommended for downflow applications due to potential water blowoff. CFM Uncased Dimensions and Airflow Data Face Vel. [2] (fpm) Wet Coil Air Pressure Drop (inches W.C.) Pan Coil by Drain Pan Width [A] Depth Height 13" 14" 15.5" 17" 20" 20.5" 23.5" 25.12" [B] [C] Unc Vert 1200 5...14.06 10 286.23.20.16 10 327.23.19 2000 9. 1200 225.16..14.06 10 2.23.20.16 10 0.23.19 2000 375. 10 200 0.22 10 229 0. 2000 286 0. 0 270.21.19.17 800 3...21 0 2.20..15.14 800 299.23.20..17 1000 375.27.25.23.22 0 193..15.12.11 800 257.22..15.14 1000 321.28.22.20.19 1200 6.28.25. 800 225.21.16.15.12.11 1000 281..21.19.17.15 1200 337.27.25.22.20 10 393.31.27. 1200 0.29.25.20.19 10 3..25.21 10 0.31.29 1200 270.28..19. 10 315.29..22 19.5" 23" 19.5" 25" 20" 25" 19.5" 11" 19.5" 13" 19.5" 15" 19.5" 17" 19.5" 19" 19.5" 21" Copper Slab 54 20 23 27 32 54 58 70 33 Weights MP 64 76 31 35 45 47 54 Alum Slab Unc Vert 34 43 14 16 21 22 43 56 21 32 37 MP 51 61 25 28 43 10 3.29.28 (E,G) (E,G) 27 (E,G) (E,G) 31 (E,G) 32 (E,G) 33 (E,G) 34 10 286.29..22 10 327.29.25 2000 9.29 10 3.28.25.21 10 0.28. 2000 375.29 0 270.28..23 800 3..28. 0 2.27.22.19. 800 299..25.21.20 1000 375..29.25. 800 257.25.21.19.17 1000 321..25.23.20 1200 6..29.27 800 225..19..17.14 1000 281.29..22.19.15 1200 337..28..20 1000 2.27.22.21..13 1200 0.29.27.25.17 10 3..28. 19.5" 23" 19.5" 25" 19.5" 11" 19.5" 13" 19.5" 15" 19.5" 17" 19.5" 19" 33 22 28 32 35 47 52 29 34 54 57 56 29 19 22 28 23 27 32 35 43 29 37 45 7
HE Series Specifications Slab [1] Number (E,G) 35 (E,G) (E,G) 37 (E,G) 41 (E,G) 43 ** (E,G) (E,G) 47 (E,G) (E,G) 49 (E,G) (E,G) 51 (E,G) 52 (E,G) (E,G) 54 (E,G) 55 Nominal MBTUH [1] E & A = Copper slab; G & B = Aluminum slab. Cased Dimensions Width [A] Depth [B] (1/4" increments) (1/2" Vertical MultiPosition increments) Vert 14.25".75" 14.".75" 15.75".75" 16.00".75" 17.25".75" 17.".75" 14.25".75" 14.".75" 15.75".75" 16.00".75" 17.25".75" 17.".75" 20.25".75" 20.".75" ** 14.25".75" ** 14.".75" ** 15.75".75" ** 16.00".75" 17.25".75" 17.".75" 20.25".75" 20.".75" ** 25.".75"." 17.25" 21.00" ** 14.".75" ** 14.75".75" 17.25".75" 17.".75" 20.25".75" 20.".75" 14.25" 17.25" 14.25" 21.00" 17.25".75" 20.5" 21.5" ** 25.5" 20.5" 21.5" ** 25.5" 20.5" 21.5" ** 25.5" 25.".75" 20.5" 21.5" 27.5" 20.5" 21.5" 20.5" 21.5" ** 27.5" Height [C] Multi Pos ** 27.5" 20.75".75" 21.00".75" 20.5" 21.5" 27.5" 27.5" 20.75".75" 21.00".75" 20.5" 21.5" 27.5" 27.5" 20.75".75" 21.00".75" 20.5" 21.5" 31.5" 31.5" 20.75".75" 20.5" 21.5" 31.5" 20.".75" 20.".75" 20.5" 21.5" ** 31.5" 20.".75" 20.'.75" 20.5" 21.5" 31.5" ** 31.5" 31.5" Notes ** 25.5" height available in all colors. ** 22.5" height avail in H, R, & T colors. ** 25.5" ** 21.5" height available in P color (D & ** 25.5" ** 25.5" ** 25.5" height available in all colors. **.5" height available in P color (D & ** If cabinet width is 17" or less for upflow or 17.25" for multiposition, cabinet height must be 27.5". 20.5" 21.5" 25.5" Not available in multiposition. Not available in multiposition. ** E43 3ton not available with HP TXV. 29.5" Not available in multiposition. 17." 21.00" 20.5" 21.5" 29.5" 29.5" ** If cabinet width is 17" or less for upflow or 17.25" for multiposition, cabinet height must be 29.5". Not available in multiposition. 20.5" 21.5" 31.5" Not available in multiposition. ** 31.5" height available in all colors. ** 29.5" height available in P color (D & 8
HE Series Specifications Slab [1] Number (E,G) 35 Nominal MBTUH [1] E & A = Copper slab; G & B = Aluminum slab. [2] Face velocity above 3 ft/min not recommended for downflow applications due to potential water blowoff. CFM Uncased Dimensions and Airflow Data Face Vel. [2] (fpm) Wet Coil Air Pressure Drop (inches W.C.) Pan Coil by Drain Pan Width [A] Depth Height 13" 14" 15.5" 17" 20" 20.5" 23.5" 25.12" [B] [C] Unc Vert 1200 270.27...20 10 315..27.25 19.5" 21" Copper Slab 39 Weights MP Alum Slab Unc Vert 31 MP 10 3.. (E,G) (E,G) 37 (E,G) 41 (E,G) 43 ** (E,G) (E,G) 47 (E,G) (E,G) 49 (E,G) (E,G) 51 (E,G) 52 (E,G) (E,G) 54 (E,G) 55 ** 1200 5...22.14 10 286..25. 10 327.28.27 2000 9. 1200 225...22.14 10 2..28. 10 0..27 2000 375.29 10 200.28 10 229.29 2000 286. 1200 158.14 10 5. 10 211.23 2000 4.33 10 3.19 10 209. 2000 1.34 800 1.10 1000 173.13 1200 208.15 1200 208.27.25.21.13 10 2.29.27.23 10 277.29. 2000 3.28 10 3.28 10 0.29 2000 375.32 10 2.27 10 277.28 2000 3. 10 225.25 10 257.27 2000 322.29 10 210. 10 0.22 2000 0.32 0 90.07.06 800 120.11.10 1000 1.15.14.14 1200 0.20.19. 10 210.22.21 10 0.31.29 10 225.17 10 257.21 2000 322. 10 210.21 10 0.29 2000 0.35 19.5" 23" 19.5" 25" 20" 25" 20" 27" 19.5" 29" 19.5" 27" 19.5" 27" 19.5" 25" 19.5" 27" 19.5" 29" 19.5" 31" 19.5" 31" 19.5" 29" 19.5" 31" 41 45 58 62 65 47 55 62 57 61 75 78 80 66 63 66 73 77 62 70 70 64 65 81 84 72 66 69 72 79 75 75 33 52 35 49 62 64 58 62 56 56 51 52 65 67 58 55 58 63 9
HE Series Specifications Slab [1] Number (E,G) 56 (E,G) 57 (E,G) 65 Nominal MBTUH [1] E & A = Copper slab; G & B = Aluminum slab. Cased Dimensions Width [A] Depth [B] (1/4" increments) (1/2" Vertical MultiPosition increments) Vert." 20.5" 21.5" 27.5" 20.75".75"." 20.5" 21.5" 31.5" Height [C] (E,G) 70." 20.5" 21.5".5" Not available in multiposition. Multi Pos Notes Not available in multiposition. 21.00".75" 20.5" 21.5" 27.5" 27.5" Not available in multiposition. (E,G) 71." 20.5" 21.5" ** 25.5" Not available in multiposition. ** 25.5" height available in all colors. ** 22.5" height avail in H, R, & T colors. ** 21.5" height available in P color (D & (E,G) 72." 20.5" 21.5" ** 25.5" (E,G) 73 (E,G) 74."." 20.5" 21.5" 20.5" 21.5" 25.5".5" Not available in multiposition. Not available in multiposition. (E,G) 75." 20.5" 21.5" ** 25.5" (E,G) 76." 20.5" 21.5" ** 25.5" Not available in multiposition. ** 25.5" height available in all colors. **.5" height available in P color (D & Not available in multiposition. ** 25.5" height available in all colors. ** 22.5" height avail in H, R, & T colors. ** 21.5" height available in P color (D & Not available in multiposition. ** 25.5" height available in all colors. **.5" height available in P color (D & (E,G) 77." 20.5" 21.5" 25.5" Not available in multiposition. 10
HE Series Specifications Slab [1] Number (E,G) 56 (E,G) 57 (E,G) 65 (E,G) 70 Nominal MBTUH [1] E & A = Copper slab; G & B = Aluminum slab. [2] Face velocity above 3 ft/min not recommended for downflow applications due to potential water blowoff. CFM Uncased Dimensions and Airflow Data Face Vel. [2] (fpm) Wet Coil Air Pressure Drop (inches W.C.) Pan Coil by Drain Pan Width [A] Depth Height 13" 14" 15.5" 17" 20" 20.5" 23.5" 25.12" [B] [C] Unc Vert 10 197.21 10 225. 2000 281. 800 1.08 1000 173.12 1200 208.16 10 171.13 10 195.16 2000 4.23 10 282.23 10 322.28 2000 2.43 10 252.19 19.5" 27" 19.5" 27" 19.5" 31" 19.5" 19" Copper Slab 68 77 83 66 92 55 Weights MP 72 Alum Slab Unc Vert 54 62 35 66 74 MP 58 (E,G) 71 10 288.25 19.5" 21" 58 37 2000 3. 10 229.17 (E,G) 72 10 2.21 19.5" 23" 2000 329.29 (E,G) 73 (E,G) 74 10 211.14 10 0. 2000 0. 10 280.27 10 320.34 2000 0.51 19.5" 25" 19.5" 19" 47 62 59 47 10 254.23 (E,G) 75 10 288.28 19.5" 21" 62 2000 2.41 10 229.20 (E,G) 76 10 2. 19.5" 23" 52 65 52 2000 329.35 (E,G) 77 10 211.17 10 1.21 2000 2. 19.5" 25" 55 69 55 11
HE Series Specifications Slab [1] Number Nominal MBTUH [1] E & A = Copper slab; G & B = Aluminum slab. Cased Dimensions Width [A] Depth [B] (1/4" increments) (1/2" Vertical MultiPosition increments) Vert 14.25" 21.00" 14." 21.00" Height [C] (E,G) 80 14.25"." 14.25"." 14."." 14."." 20.5" 21.5" 20.5" 20.5" 14.25".75" 14.".75" (E,G) 81 14.25".75" 14.".75" 20.5" 21.5" 20.5" 20.5" 14.25".75" 14.".75" 14.25".75" 14.".75" ** 25.5" height available in all colors. (E,G) 82 14.25".75" 14.".75" 20.5" 21.5" ** 25.5" ** 25.5" ** 22.5" height available in H, R, & T 14.25".75" 14.".75" colors. 14.25".75" 14.".75" (E,G) 83 14.25".75" 14.".75" 20.5" 21.5" 25.5" 25.5" 14.25".75" 14.".75" 17.25".75" 17.".75" (E,G) 84 17.25".75" 17.".75" 20.5" 21.5" 25.5" 25.5" 20.75".75" 21.00".75" 14.25".75" 14.".75" (E,G) 85 14.25".75" 14.".75" 20.5" 21.5" 27.5" 27.5" 14.25".75" 14.".75" 17.25".75" 17.".75" (E,G) 86 17.25".75" 17.".75" 20.5" 21.5" 27.5" 27.5" 20.75".75" 21.00".75" ** 14.25".75" ** 14.".75" (E,G) 87 ** 14.25".75" ** 14.".75" 20.5" 21.5" ** 27.5" ** 27.5" ** 14.25".75" ** 14.".75" ** 17.25".75" 17.".75" (E,G) 88 ** 17.25".75" 17.".75" 20.5" 21.5" ** 27.5" ** 27.5" ** 20.75".75" 21.00".75" Multi Pos Notes ** If cabinet width is 20.75" or less for upflow or multiposition, cabinet height must be 29.5". ** If cabinet width is 20.75" or less for upflow or multiposition, cabinet height must be 29.5". 12
HE Series Specifications Slab [1] Number (E,G) 80 (E,G) 81 (E,G) 82 (E,G) 83 (E,G) 84 (E,G) 85 (E,G) 86 (E,G) 87 (E,G) 88 Nominal MBTUH [1] E & A = Copper slab; G & B = Aluminum slab. [2] Face velocity above 3 ft/min not recommended for downflow applications due to potential water blowoff. Uncased Dimensions and Airflow Data Wet Coil Air Pressure Drop (inches W.C.) by Drain Pan Width [A] Face Pan Coil Copper Slab CFM Vel. [2] Depth Height 13" 14" 15.5" 17" 20" 20.5" 23.5" 25.12" Unc (fpm) [B] [C] Vert MP 0 169.20.19 800 225.28.27 1000 281..37 1200 3.. 800 200.23.22 1000 2.35.31 1200 0..41 800 1.22.19 1000 2.32.28 1200 271.45.37 800 164.19.16 1000 205.28.23 1200 6..31 10 287..37 10 328.49.39 2000 9. 800 151.16.14.13 1000 8..20. 1200 2.37.28. 10 3.37. 10 1..37 2000 376.41 800 139.15.13.10 1000 174..19.15 1200 208..27.20 10 3..35 10 277.45. 2000 347.39 19.5" 17" 19.5" 19" 19.5" 21" 19.5" 23" 19.5" 23" 19.5" 25" 19.5" 25" 19.5" 27" 19.5" 27" 59 61 52 54 51 54 57 59 61 63 66 66 Weights 56 59 63 65 68 70 72 74 Alum Slab Unc Vert 32 34 35 37 47 49 43 41 43 47 49 MP 45 47 52 54 56 58 59 13
HE Series Pallet Quantities Cabinet Width Cased Pallet Qty by Cabinet Height (in) 12.5 14.5 16.5.5 20.5 21.5 22.5.5 25.5 27.5 29.5 31.5 13.25" 12 12 12 6 6 6 6 6 13." 12 12 12 6 6 6 6 6 13.75" 12 12 12 6 6 6 6 6 14.00" 12 12 12 6 6 6 6 6 14.25" 12 12 12 6 6 6 6 6 14." 12 12 12 6 6 6 6 6 14.75" 12 12 12 4 4 4 4 4 15.00" 12 12 12 4 4 4 4 4 15.25" 12 12 12 4 4 4 4 4 15." 12 12 12 4 4 4 4 4 15.75" 12 12 12 4 4 4 4 4 4 16.00" 12 12 12 4 4 4 4 4 4 16.25" 12 12 12 4 4 4 4 4 4 16." 12 12 12 4 4 4 4 4 4 16.75" 8 8 8 8 4 4 4 4 4 4 17.00" 8 8 8 8 4 4 4 4 4 4 17.25" 8 8 8 8 4 4 4 4 4 4 4 17." 8 8 8 8 4 4 4 4 4 4 4 17.75" 8 8 8 8 4 4 4 4 4 4 4.00" 8 8 8 8 4 4 4 4 4 4 4.25" 8 8 8 4 4 4 4 4 4 4." 8 8 8 4 4 4 4 4 4 4.75" 8 8 8 4 4 4 4 4 4 4 19.00" 8 8 8 4 4 4 4 4 4 4 19.25" 8 8 8 4 4 4 4 4 4 4 19." 8 8 8 4 4 4 4 4 4 4 19.75" 8 8 8 4 4 4 4 4 4 4 20.00" 8 8 8 4 4 4 4 4 4 4 20.25" 8 8 8 4 4 4 4 4 4 4 20." 8 8 8 4 4 4 4 4 4 4 20.75" 8 8 8 4 4 4 4 4 4 4 4 21.00" 8 8 8 4 4 4 4 4 4 4 4 21.25" 8 8 8 4 4 4 4 4 4 4 4 21." 8 8 8 4 4 4 4 4 4 4 4 21.75" 8 8 8 4 4 4 4 4 4 4 4 22.00" 8 8 8 4 4 4 4 4 4 4 4 22.25" 8 8 8 4 4 4 4 4 4 4 4 22." 8 8 8 4 4 4 4 4 4 4 4 22.75" 8 8 8 4 4 4 4 4 4 4 4 23.00" 8 8 8 4 4 4 4 4 4 4 4 23.25" 8 8 8 4 4 4 4 4 4 4 4 23." 8 8 8 4 4 4 4 4 4 4 4 23.75" 8 8 8 4 4 4 4 4 4 4 4.00" 8 8 8 4 4 4 4 4 4 4 4.25" 8 8 8 4 4 4 4 4 4 4 4." 8 8 8 4 4 4 4 4 4 4 4.75" 4 4 4 4 4 4 4 4 4 4 4 25.00" 4 4 4 4 4 4 4 4 4 4 4 25.25" 4 4 4 4 4 4 4 4 4 4 4 25." 4 4 4 4 4 4 4 4 4 4 4 25.75" 4 4 4 4 4 4 4 4 4 4 4.00" 4 4 4 4 4 4 4 4 4 4 4.25" 2 2 2 2 2 2 2 2 2 2 2." 2 2 2 2 2 2 2 2 2 2 2.75" 2 2 2 2 2 2 2 2 2 2 2 14
HE Series Pallet Quantities Drain Pan Width Uncased Pallet Qty by Coil Height (in) 11 13 15 17 19 21 23 25 27 29 31 13.00" 12 12 12 6 6 6 6 14.00" 12 12 12 6 6 6 6 15." 12 12 12 4 4 4 4 4 17.00" 8 8 8 8 8 4 4 4 4 20.00" 8 8 4 4 4 4 4 4 20." 4 4 4 4 4 23." 8 4 4 4 4 4 4 25.12" 4 4 15
HH Series Features & Nomenclature Product Features High efficiency lanced fin design. Nohassle 5 year warranty. R410A, R22, A/C & heat pump compatible. All coils have durable packaging with bar coded labels on the box. Threaded expansion valves available factory installed or as a field installed kit. Coils are air pressure tested at 0 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air. Piston options include externally accessible body for easy piston change out and/or TXV installation. Liquid line refrigerant connections are 3/8" ODF. Suction line refrigerant connections are 7/8" ODF. Nomenclature H H52 2 A 225 A 21 02 59 H = Embossed Piston Size [1] AP = TXV Access Port [2] Slab Number MBTUH R22 R410A 12 = 41 41 Metering Device = 49 1 = Piston (R410A) = 59 2 = Piston (R22) = 67 59 3 = Bleed A/C TXV (R22) = 73 67 4 = Non Bleed A/C TXV (R22) = 80 73 5 = Non Bleed HPA/C TXV (R22) = 84 76 6 = Non Bleed A/C TXV (R410A) = 93 93 9 = Non Bleed HPA/C TXV (R410A) [1] Piston will always be sized to match the nominal BTU rating of the coil. Nominal MBTUH [2] TXV access port standard on factory installed TXVs; optional on piston models. Cabinet Depth A = 10" Note: Fixed, not a selectable option. Product Code 02 = Cased "H" Cabinet Opening Width 5 = 5/8" Cabinet Opening Height 225 = 22 5/8" Note: Cabinet opening width is not a 17 = 17 1/4" Note: Cabinet opening height is not a 5 = 5/8" selectable option; see dimensions. 21 = 21 1/4" selectable option; see dimensions. 5 = 5/8" 5 = 5/8" A = Bidirectional airflow 5 = 5/8" 16
HH Series Specifications A C B A = Height B = Width C = Depth (excluding flange) Supply Opening: (A 1.") x (B 4 3/8") Return Opening: (A 1.") x (B 4 3/8") Slab Num H H41 H H43 H Dimensions 32 Slab Number Overall Supply/Return Opening H45 Height [A] Width [B] Depth [C] Height Width H H 3/4" 23" 10" 17 1/4" 5/8" H47 H, H45 3/4" 27" 10" 17 1/4" 22 5/8" H H41, H 3/4" 31" 10" 17 1/4" 5/8" H49 H, H47 3/4" 35" 10" 17 1/4" 5/8" H H43, H 3/4" 41" 10" 17 1/4" 5/8" H51 H49 3/4" 47" 10" 17 1/4" 5/8" H52 H, H51, H56, H57 22 3/4" 23" 10" 21 1/4" 5/8" H H52, H58 22 3/4" 27" 10" 21 1/4" 22 5/8" H54 H, H59 22 3/4" 31" 10" 21 1/4" 5/8" H55 H54, H 22 3/4" 35" 10" 21 1/4" 5/8" H56 H55, H61 22 3/4" 41" 10" 21 1/4" 5/8" H57 H62, H66 22 3/4" 47" 10" 21 1/4" 5/8" H58 H59 H H61 H62 H66 Weight / Pallet Qty Weight (lbs) 34 39 39 43 31 43 34 41 57 61 75 Pallet Quantity 8 8 8 8 8 8 8 8 8 6 6 6 4 4 4 3 6 6 4 4 4 3 3 3 Airflow Data Slab Number Wet Coil Air Pressure Drop (Inches W.C.) by CFM 0 800 1000 1200 10 10 H.17.20.23 H, H45.16.19.22.25 H41, H.17.20.22..25 H, H47.17.20.23. H43, H.16..22 H49.17.21 H, H56.19.22 H51, H57.17.19.22.25 H52, H58..20.22.. H, H59..20.23. H54, H.17..23 H55, H61.19.21 H62.17.19 H66.22. 2000.27.25.27.25.23.28 00.27.32 17
LA/LH Series Features & Nomenclature Product Features Patented lanced fin design. R410A, R22, A/C and heat pump compatible. Dual 3/4" FPT condensate drains. Liquid line refrigerant connections are 3/8 ODF. Suction line refrigerant connections are 7/8 ODF. Dual circuit coils have row split circuiting allowing full coil surface to be active when 1 or 2 circuits are operating. Factory installed TXV valves. Up or down airflow compatible. Coils are air pressure tested at 0 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air. Drain pans are constructed of aluminum to resist corrosion. Heavy gauge embossed galvanized cabinets fully lined with 1/2" insulation. Left hand drain and refrigerant connections. All coils are individually packaged on skids. Nomenclature LA 6 1 AC Large Capacity Coil Refrigerant LA = "A" Coil blank = R22 LH = Horizontal Slab Coil 4 = R410A Tonnage Number of Circuits Application AC = Air Conditioning AC/HP = Air Conditioning & Heat Pump Note: Engineering must verify internal volume for heat pumps. Application "A" Coils "H" Coils Dual Circuit Single Circuit Single Circuit Model LA 6 2 AC LA 8 2 AC LA 10 2 AC LA 7.5 1 AC/HP LA 10.5 1 AC Number of Circuits (2) 1 1/2 3 tons ea. [1] (2) 3 1/2 4 tons ea. [1] (2) 3 1/2 5 tons ea. [1] (1) 6 7 1/2 tons (1) 7 1/2 10 tons Application Air Conditioning Only Air Conditioning Only Air Conditioning Only Air Conditioning or Heat Pump [2] Air Conditioning Only LH 7.5 1 AC/HP (1) 6 7 1/2 tons Air Conditioning or Heat Pump [2] [1] May be manifolded together in the field to form one circuit. [2] Engineering must verify internal volume compatibility for heat pumps.
LA/LH Series Specifications Dimensions and Weights Model Cased LA Width Depth Height LA 6 29" 21.5".5" LA 7.5 33" 21.5".5" LA 8 35" 21.5".5" LA 10 " 21.5".5" LA 10.5.5" 21.5" 22.5" Model Uncased LA Width Depth Height LA 6 25.5" 21".5" LA 7.5 32.5" 21".5" LA 8 32.5" 21".5" LA 10 39.5" 21".5" LA 10.5 49.5" 21" 20.5" Model Cased LH Width Depth Height LH 7.5 10" 47" 22.75" Duct Connections N/A.63" 21.25" Weight 86 90 103 1 1 Weight 83 87 100 115 137 Weight 75 Airflow Data Wet Coil Air Pressure Drop (Inches W.C.) by CFM Model 10 2000 00 2800 3200 00 LA 6.20.23.28 LA 7.5 & 8.20.23.28 LA 10.20.23.28 LA 10.5...34 LH 7.5.23.29. 19
2175 West Park Place Boulevard Stone Mountain, GA 087 www.adpnow.com