FLEET OVERVIEW JAN 2016
PIPELINE SERVICES & CAPABILITIES OVERVIEW PIPELINE Up to 60 Total Outer Diameter Up to 38 s ton (35 m ton) Pipe Joints Water Depth Operating Range <7 to ~1,000 (2.1m ~300m) Can accommodate 40 (12.1m) to 60 (18.2m) pipe joints Pipelay Single, Dual, Triple & Quad Pipeline Bundles Pre-Commissioning & Hydrotesting Riser, Spools, Subsea Assembly & Single/Dual Hot Tap Tie-ins Shore Approaches & Horizontal Directional Drilling (HDD) Casing/Crossing Pulls, J & I Tube Pulling & A/R: 4.25 Ø wire Traction Winch 1,000 Kips (500st) single line pull o Wire capacity 4.25 Ø x 12,000 feet 3.5 Ø wire Lucker Wire Puller 600 Kips (300st) single line pull o Wire capacity 3.5 Ø x 6,500 feet Winches up to 550 Kips (275st) pulling capacity up to 2.75 Ø x 5,500 feet Pipeline Repair, Abandonment & Reverse Lay Steel and High Density Poly Ethylene (HDPE) Spooled Umbilical & Cable Lay PIPELINE OPERATIONS PIPELINE BURIAL & EXCAVATION Burial of up to 72 total Outer Diameter Pipelines Burial of Active & Inactive Pipelines Trenching to -25 (7.62m) Below Mud Line (BML) to Bottom of Ditch Self Propelled Burial Sled For Active In Service Pipeline Burial Self Propelled Pipeline Excavation Sleds Bi-Directional Sled Operations High Pressure / High Performance Portable 9 Stage Jet Pumps to 2,500 PSI Successful Excavations to >100 (30.48m) BML in Water Depths >300 (91.4m) OFFSHORE SURVEY As Built & As Laid Surveys Position, Anchor Plot & Anchor Verification Surveys Anomaly Avoidance & Mapping Surveys * Project parameters will dictate specific asset limitations **Subject to project parameters, lay stress analysis & environmental conditions ISO 9001:2008 ISO 14001:2004 OHSAS 18001:2007
PIPELAY BARGE & SUPPORT FLEET OVERVIEW PIPE LAYBARGES: BISSO IROQUOIS - 400 x 100 x 30 440 kip system with A&R Pipe OD - 4 up to 60 10 point mooring Pipelay depth ~13 down to 1,000 256 bunks L/B SUPER CHIEF - 265 x 72 x 16 100 kip system with A&R Pipe OD - 2 up to 40 7 point mooring Pipelay depth from ~10 down to 500 91 bunks L/B MIGHTY CHIEF - 196 x 76 x 11 TIE-IN & BURIAL ASSETS: BISSO SUBSEA VISION - 415 x 100 x 25 12 Man - 1,000 ABS Classed Sat System, IMCA DO24 compliant HRC, 3 Man Bell via Moon Pool Surface Air & Gas, IMCA DO23 compliant 300 ton main crane 40 ton aux crane 50 ton davits available 84 bunks DSV JOSEPH BISSO - 180 x 44 x 15 Surface Air & Gas, IMCA DO23 compliant 4 pt Mooring 30 ton crane 36 bunks PIPELINE OPERATIONS 50 kip system with A&R Pipe OD - 2 up to 24 7 point mooring Lay depth from >7 down to 200 62 bunks SPUD SUPPORT BARGE: BIG EAGLE - 155 x 50 x 12 Min draft 3 no crane Min draft 4.5 with Manitowoc 3900, 120 boom 4 point mooring 2 Spuds - 30 x 70 (water depth 3 to 50 ) Deck crane project specific PORTABLE BURIAL ASSETS: Advanced Burial & Backfill Plough Portable Jet Pump Systems: o (4) 1,500 GPM @ 2,500 PSI o (3) 2,800 GPM @ 1,150 PSI o (2) 3,000 GPM @ 300 PSI Single stage conventional drag sleds Dual stage conventional drag sled Self-propelled burial sled Airlifts, Dredge Pumps & Rock Dumping
PIPELINE BURIAL & EXCAVATION OVERVIEW PIPELINE BURIAL & EXCAVATION Bury or Expose > 60 Diameter Concrete Coated Pipelines Turbidity Mitigation Overcome Very High Vane Shear, Hard Pan, Glacial Till Soils, High Plasticity Clays & Sugar Sandy Conditions Water Depth Range Beach to >1,000 (0m >300 m) Bury or Expose Single, Dual, Triple & Quad Pipeline Bundles Umbilicals and Cables PIPELINE BURIAL & EXCAVATION PIPELINE BURIAL & EXCAVATION Advanced Burial & Backfill Pipeline Plough Pre-Trenching & Post-Trenching Bury or Expose Active & Inactive Pipelines Trenching to > -20 (6m) Below Mud Line (BML) Conventional Single & Dual Stage Pull Sleds Self Propelled Burial Sled For Active Pipeline Burial Self Propelled Pipeline Excavation Sled Bi-Directional Sled Operations High Pressure/High Performance Portable Jet Pumps Successfully Excavated >100 (30.48m) below the seafloor in Water Depths >300 (91.4m) Portable Systems Deployed From Anchored or DP2 Asset of Availability OFFSHORE SURVEY POST BURIAL As Built Surveys Position and Anchor Plot Surveys Mapping Survey
PIPELINE BURIAL & EXCAVATION SYSTEMS Pipeline burial & excavation portable high pressure and high volume packages can be deployed worldwide and used from BISSO MARINE assets or local vessels of availability; the supporting asset can be conventionally moored or dynamically positioned. Since most major international pipelay contractors do not have burial capabilities on-board their pipelay barges or vessels. BISSO MARINE can perform stand alone burial projects as a subcontractor to support large diameter pipelay operations performed by other contractors. The BISSO MARINE laybarges have on-board jetting systems for most burial requirements. In more challenging cases, the BISSO MARINE laybarges can be supplemented by the portable high pressure and high volume packages for deeper waters, deeper burial, high vane sheer soils or sugar sandy conditions. PIPELINE BURIAL & EXCAVATION Other non-pipelay specific BISSO MARINE barges and vessels or third party assets can be outfitted with the portable high pressure and high volume packages, tools and sleds to support any pipeline burial or excavation project. The environmentally friendly BISSO MARINE Advanced Burial and Backfill Pipeline Plough is a uniquely designed to be a Pre-Trenching, Post-Trenching Burial and Backfill plough mitigating turbidity, seafloor or water column impact. This unique design uses a singular chassis for two very different functions which reduces the footprint, weight and expense of mobilizing two different ploughing tools: one for burial and a separate for backfill. The conversion between the two different functions is easily done in about 72 hours at or near the work site by first placing the plough on the deck of a barge, vessel or at a shoreside facility; then by removing the plough share and mouldboard unit and installing the two backfill blades. The plough can rapidly be transported worldwide by ship or moved by tug and barge. During a project the plough can be transported on the deck of a materials barge and handled by an attending lift vessel. The plough is installed on a pipeline with diver or ROV assistance and observation. Once the plough is safely on a pipeline, all operations are remotely controlled via an umbilical using electronic monitoring and operational control systems to monitor plough shares position, towing/pulling forces, pitch, roll, water depth, trench depth, vertical and horizontal forces on the pipeline, pipeline tracking, Mesotech and system diagnostics.
DERRICK BARGE SERVICES & CAPABILITIES OVERVIEW DERRICK BARGE OPERATIONS OFFSHORE CONSTRUCTION Single derrick barge lifts up to 800 short tons (in air) Multi derrick barge lifts up to 2,100 short tons (in air)* Water Depth Range <7 to ~500 (2.1m 152.4m)* Offshore Facility Installation & Decommissioning Offshore Facility Maintenance, Modification & Repair Piledriving and Piling & Conductor cutting (internal & external) SUBSEA/SURFACE LIFTING, LOWERING & PULLING Up to 7,500 short tons capacity* Single Line Pull Winches up to 1,000 Kips Chain Pullers up to 660 kips Pulling Blocks up to 1,200 kips EXCAVATION & SALVAGE Subsea excavation to -1,000 water & > -100 below mudline (BML)* Salvage & Wreck Removal Open Ocean, Coastal & Inshore HEAVYLIFT Thruster Swap Deepwater Drilling Ships & Semi-Submersibles* Blowout Preventer loading & offloading at offshore locations* Shoreside Fabrication - Load Out & Load In Shipyard & Shipbuilding Industry Support Shipping & Cargo Transfer Civil Construction (Bridge Spans, Flood Gates & Lock Gates) Government & Infrastructure Emergency Response ACCOMMODATIONS & FLOATEL Offshore project support up to 256 bunks *Subject to specific project parameters & environmental conditions
DERRICK BARGE OVERVIEW DIVE SUPPORT ASSETS: DERRICK BARGE OPERATIONS D/B BISSO 800 ABS Classed 800 short ton (st) capacity @ 75 from stern Main Block Lowering - 800 st -100 subsea Main boom 200 Aux Cranes (2) 135 st @ 30 Ø Boom 160 Hull 300 x 90 x 18.5 Bunks 54 (as configured, can expand) D/B CAPPY BISSO ABS Loadline 700 st capacity @ 50 from stern Main Boom 155 Hull 200 x 70 x 14 D/B LILI BISSO ABS Loadline 600 st capacity @ 60 from stern (no jib) 540 st capacity @ 60 from stern (with jib) 300 st capacity @ 120 from stern - jib Main Boom 155 + Jib 40 Hull 195 x 72 x 12 BISSO SUBSEA VISION ABS Classed 260 st Revolving @ 40 Ø (20 outreach from port) Main boom 180 Aux Crane 61 st @ min Ø Boom 100 Hull 415 x 100 x 25 Bunks 100 (as configured, can expand) D/B BOAZ ABS Classed 250 st Revolving @ 35 outreach Main boom 180, aux 210, whip 230 80 st Aux Revolving @ 65 outreach Hull 250 x 76 x 17 - Fitted with anti-rolling chocks Bunks 58 (as configured, can expand) D/B BISSO 350 Lloyds Registry Classed 385 st @ 15 from stern 270 st Revolving @ 23 from stern Main boom 164, aux 180, whip 196 165 st Aux Revolving @ 57 from stern Hull 250 x 78 x 18 - Fitted with anti-rolling chocks Bunks 64 (as configured, can expand)
BISSO IROQUOIS CLASSIFICATION: ABS All Oceans A1 Barge Classed # 7306063 DIMENSIONS: Length with Stinger Hull Length Width: Depth: 580 ft / 176.7 m 400 ft / 126.5 m 100 ft / 30.4 m 30 ft / 9.14 m QUARTERS: 256 bunks Client Offices Meeting Rooms, Lounge, Theater, Gym Hospital 3 beds Galley Seating - 100 CAPACITIES: Pipe Storage: 4,800 ft2 / 445.9 m 2 Deck Cargo Capacity: 5,000 t / 5,080 mt Fuel: 534,428 gal / 1,631.3 t Potable Water: 60,000 gal / 227 m 3 Water Maker: 1,200 gal/hr / 3.66 t/hr Ballast Water: 1,489,206 gal / 4,545.8 t ELECTRONICS: SAT TV, Voice, VHF, Wx Fax & Data, Radar, SSB GENERATORS (ship s power): 7,500 kw MAXIMUM WORKING DEPTH: 1,000 ft / 300 m MAIN CRANE: American R-40-250 st / 226.8 mt @ min. radius Center of radius to stern 70 ft / 21 m Center of radius to side shell 50 ft / 15 m Main Boom 175 ft / 53 m AUXILIARY CRANE: Manitowoc 4100W S2 Boom 134 st / 121 mt 110 ft / 34 m PIPELAY EQUIPMENT : Up to 60 Total Ø Including Coating Up to 38.5 s ton (38.5 m ton) Pipe Joints Work Stations: (4) Welding, (1) X-Ray, (1) Sand Blast, (2) Field Joint (2) Pipe Tensioners: 440 kips Total 440 kips A&R Winch: 3 x 5,000 / 76mm x 1,524 m STINGERS: (1) Section Rigid Ladder 110 ft / 33.52 m (2) Section Rigid Truss 185 ft / 56.38 m (5) Section Alpha Pontoon 300 ft / 91.44m DAVITS: HELIDECK: (5) 75st (68mt) Hydraulic Chain 9,700 lb rated (Sikorsky S-76) 60 ft x 60 ft / 18.2 m x 18.2 m MOORING: (10) Points 5,300 ft x 2.5 / 1,516 m x 63.5 mm Per Drum Pull Rating: Brake Holding Power: 320 kips 744 kips Line Speed: High Speed 180 ft/min / 54.8 m/min Low Speed 80 ft/min / 24.3 m/min ANCHORS: Flipper Delta & Bruce FFTS Up to 16.5 st / 15 mt PORTABLE PIPE BURIAL EQUIPMENT: Conventional Pull Style Sleds & Self-Propelled Sled Burial to -20 ft / 6m bottom of ditch Project Specific Portable Jet Pumps (available): Up to 20,000 GPM Up to 2,500 PSI Advanced Burial & Backfill Plough
MAIN CRANE: AMERICAN R-40 Dynamic Revolving STINGERS: (2) SECTION RIGID TRUSS STINGER FLOATING ALPHA PONTOON BISSO IROQUOIS LOAD CHART & STINGER ARRANGEMENTS Capacity up to 60 Ø Pipe / 38.5 s ton (35 m ton) Joints
BISSO SUBSEA VISION DIMENSIONS: Length (with apron): Width: Depth: 415 ft /126.5 m 100 ft / 30.4 m 25 ft / 7.6 m QUARTERS: 84 as configured Up to 140 (using additional portables) Client Office, Client Room Meeting Rooms, Lounge Infirmary Galley Seating - 48 CLASSIFICATION: ABS All Oceans A1 Barge Classed # 7703417 CAPACITIES: Pipe Storage: 4,250 ft2 / 394.8 m2 Deck Cargo Capacity: 5,000 t / 5,080 mt Fuel: 149,000 gal / 475.6 t Potable Water: 428,400 gal / 1,621.6 t Water Maker: 700 gal/hr / 2.65 t/hr Ballast Water: 2,863,413 gal / 10,839.2 t ELECTRONICS: SAT TV, Voice, VHF, Wx Fax & Data, Radar, SSB GENERATORS (ship s power): (2) 800 KW MAXIMUM WORKING DEPTH: Pipelay: 500 ft / 152.4 m Diving: 1,000 ft / 300 m MAIN CRANE: Seatrax S 12632-300 st / 272.1 mt @ min. radius Center of radius to portside: 19 ft / 5.79 m 180 ft / 55 m Main Boom AUXILIARY CRANE: Manitex 4800-61 st / 55.3 mt @ min. radius Center of radius to portside: 14 ft / 4.2 m 100 ft / 30 m Main Boom SATURATION DIVING SYSTEM: 12 man - 1,000 ft (300 m) ABS Classed (2) DDC - 6 man each (1) 12 man HRC (1) 3 man diving bell - Moon pool launch Gas reclaim system *Full Sat System specs available upon request HELIDECK: 12,000 lb rated (Sikorsky S-76) 48 ft x 48 ft / 14.6 m x 14.6 m MOORING: (8) Points (up to (12) points available) Stall Rating: 300 kips Brake Holding Power: 450 kips Line Speed: Max 840 FPM / 256 MPM Min 80 FPM / 24 MPM 5,100 ft x 1.75 / 1,554 m x 44 mm Per Drum Anchors: Flipper Delta & Bruce FFTS Up to 14 st / 13 mt PORTABLE PIPELAY EQUIPMENT AVAILABLE: Up to 42 Including Coating Work Stations: (3) Welding, (1) X-Ray, (1) Field Joint Pipe Tensioner: 80 kips A&R Winch: 100 kips Stinger Length: 100 ft / 32.8 m Ladder (4) Davits: 50st (45mt) Hydraulic Boom PORTABLE PIPE BURIAL EQUIPMENT: Conventional Pull Style Sleds & Self-Propelled Sled Burial to -20 ft / 6m bottom of ditch Project Specific Portable Jet Pumps (available): Up to 20,000 GPM Up to 2,500 PSI Advanced Burial & Backfill Plough
BISSO SUBSEA VISION SEATRAX LOAD CHART BISSO SUBSEA VISION LOAD CHART Max Rotating Lift Capacity @ 40 /12m - 261.14 st / 230.5 mt Max Hook Height @ 40 /12m 180 /55m
L/B SUPER CHIEF DIMENSIONS: Length (with apron): Width: Depth: QUARTERS: 91 Sick Bay: (1) 2 man CLASSIFICATION: US Flag USCG COI ABS CLASSED # 9938791 Keel laid 1999 / converted 2007 / upgraded 2014 CAPACITIES: Fuel: Water: Ballast: ELECTRONICS: Full Gyro Positioning Survey Equipment, Mesotech SAT TV, Voice, Wx & Data, Radar, SSB GENERATORS (ship s power): (1) 1000 KW, (1) 800 KW, (1) 150 KW WELDING MACHINES: (8) Miller 400 AMP DC 265 ft / 80.7 m 72 ft / 21.94 m 16 ft / 4.9 m 138,150 gal / 441 t 153,500 gal / 581 t 300,020 gal / 1,135 t DECK CRANE: Manitowoc 4100W S2 - Boom Length 120 ft / 36.6 m 98 st @ 32 ft radius - working limit (8) parts 88.9 mt @ 9.75 m radius - working limit (8) parts HYDRAULIC CRANE: Nautilus 40-2-70 (Bow): Main 7 st / 6 mt @ 60 ft/ 18.2 m radius Aux 2.9 st / 2 mt @ 70 ft / 21.3 m radius MOORING: (7) Points: 4,000 ft x 1.5 / 1,219 m x 38 mm Per Drum Stall Rating: 200 kips Brake Holding Power: 225 kips (2 nd layer) Line Speed: Max 400 fpm / 121 mpm Anchors: Delta Flipper & Bruce FFTS Up to 14 st / 13 mt COMMON PIPE SIZE STORAGE AMOUNTS: 14-353 Joints (14,106 ft / 4,300 m) 12-480 Joints (19,200 ft / 5,852 m) 10-691 Joints (27,648 ft / 8,427 m) 8-1,080 Joints (43,200 ft / 13,167 m) 6-1,920 Joints (76,800 ft / 23,409 m) 4-4,320 Joints (172,800 ft / 52,669 m) PIPELAY EQUIPMENT: Up to 36 Including Coating Work Stations: (3) Welding, (1) X-Ray, (1) Field Joint Pipe Tensioner: Up to 100 kips A&R Winch: Up to 100 kips Stinger Length: 55 ft / 26 m (Standard) (Project specific stinger design available) PIPE BURIAL EQUIPMENT: Conventional Pull Style Sleds & Self-Propelled Sled Burial to -20 ft / 6m bottom of ditch Internal Hull Mounted Jet Pumps: Total Output: 6,400 GPM @ 725 PSI (2) MSD-D 2 Stage Bingham 10 x 12 x 19A PORTABLE PIPE BURIAL EQUIPMENT: Conventional Pull Style Sleds & Self-Propelled Sled Burial to -20 ft / 6m bottom of ditch Project Specific Portable Jet Pumps (available): Up to 20,000 GPM Up to 2,500 PSI Advanced Burial & Backfill Plough
L/B MIGHTY CHIEF DIMENSIONS: Length: Width: Depth: Min. Draft: QUARTERS: Up to 62 196 ft / 59.7 m 76 ft / 23.1 m 11.5 ft / 3.5 m 6 ft /1.8 m CLASSIFICATION: US Flag USCG COI ABS X A1 Barge: Classed # 7715157 CAPACITIES: Fuel: Water: Ballast: 49,920 gal / 159 t 109,824 gal / 4,543 t 65,208 gal / 246 t ELECTRONICS: Full Gyro Positioning Survey Equipment, Mesotech SAT TV, Voice, Wx & Data, Radar, SSB GENERATORS (ship s power): (3) 350 KW, (1) 125 KW WELDING MACHINES: (8) Miller 400 AMP DC COMMON PIPE SIZE STORAGE AMOUNTS: 12-250 Joints (10,000 ft / 3,048 m) 10-360 Joints (14,400 ft / 4,389 m) 8-563 Joints (22,520 ft / 6,864 m) 6-1,000 Joints (40,000 ft / 12,192 m) 4-2,250 Joints (90,000 ft / 27,432 m) DECK CRANE: Manitowoc 3900 - Boom Length 120 ft / 36.6 m MOORING: (7) Points: 4,000 ft x 1.25 / 1,219 m x 31 mm Per Drum Stall Rating: 153 kips Brake Holding Power: 305 kips Line Speed: Max 328 fpm / 100 mpm Anchors: Delta Flipper Up to 3.25 st / 2.9 mt PIPELAY EQUIPMENT: Up to 12 Including Coating Work Stations: (2) Welding, (1) X-Ray & Field Joint Pipe Tensioner: Up to 50 kips Stinger Length: 40 ft / 12.2 m (Standard) (Project specific stinger design available) (SCAN QR CODE WITH SMART PHONE FOR LINK TO PIPELAY ANIMATION) PIPE BURIAL EQUIPMENT: Conventional Pull Style Sleds & Self-Propelled Sled Burial to -20 ft / 6m bottom of ditch Internal Hull Mounted Jet Pumps: Total Output:7,000 GPM @ 442 PSI each (2) Sulzer Single Stage (3,500 GPM @ 442 PSI each) PORTABLE PIPE BURIAL EQUIPMENT: Conventional Pull Style Sleds & Self-Propelled Sled Burial to -20 ft / 6m bottom of ditch Project Specific Portable Jet Pumps (available): Up to 20,000 GPM Up to 2,500 PSI Advanced Burial & Backfill Plough
DIMENSIONS: Length: 250 ft / 76.2 m Width: 76 ft / 23.1 m Depth: 17 ft / 5.1 m Hull fitted with anti-roll chocks on bilge knuckles QUARTERS: Bunks 58 (as configured, can expand) CLASSIFICATION: US Flag USCG COI ABS CLASSED # 7600332 Built 1999 / converted 2004 / upgraded 2014 CAPACITIES: Fuel: Water: Ballast: 14,210 gal / 45 t 379,236 gal / 1,435 t 464,236 gal / 1,757 t MOORING: (4) Points: 3,600 ft x 1.75 / 1,100 m x 44.4 mm Per Drum Stall Rating: 200 kips Brake Holding Power: 225 kips (2 nd layer) Line Speed: Max 400 fpm / 121 mpm ELECTRONICS: Full Gyro Positioning Survey Equipment, Mesotech SAT TV, Voice, Wx & Data, Radar, SSB Anchors: Delta Flipper & Bruce FFTS Up to 14 st / 13 mt JETTING SYSTEMS: Portable Jet Pumps (available): D/B BOAZ (3) Union 6 x 10 x 13 MQF 4 Stage (2,800 GPM @ 1,150 PSI ea) (2) Patterson 10 x 10 DMD 2 Stage (3,000 GPM @ 300 PSI ea) Air Compressors: as required GENERATORS (ship s power): (2) 400 KW / 500 KVA (1) 125 KW / 156 KVA DECK CRANE: Manitowoc 3900 or 4000 Boom Length 120 ft / 36.6 m HELIDECK: 40 x 40 / 12.1m x 12.1m 6000 lbs / 2.7 mt
D/B BOAZ LOAD CHART
DIMENSIONS: Length: 250 ft / 76.2 m Width: 78 ft / 23.77 m Depth: 18 ft / 5.5 m Hull fitted with anti-roll chocks on bilge knuckles QUARTERS: Bunks 64 (as configured, can expand) CLASSIFICATION: Panamanian Flag Lloyds Registry Built 1974 / converted 2009 CAPACITIES: Fuel: Water: Ballast: 35,187 gal / 112 t 39,097 gal / 148 t 642,730 gal / 2,433 t ELECTRONICS: Full Gyro Positioning Survey Equipment, Mesotech SAT TV, Voice, Wx & Data, Radar, SSB MOORING: (4) Points: 3,600 ft x 1.75 / 1,100 m x 44.4 mm Per Drum Stall Rating: 200 kips Brake Holding Power: 225 kips (2 nd layer) Line Speed: Max 400 fpm / 121 mpm Anchors: Delta Flipper & Bruce FFTS Up to 14 st / 13 mt JETTING SYSTEMS: Portable Jet Pumps (available): D/B BISSO 350 (3) Union 6 x 10 x 13 MQF 4 Stage (2,800 GPM @ 1,150 PSI ea) (2) Patterson 10 x 10 DMD 2 Stage (3,000 GPM @ 300 PSI ea) Air Compressors: as required GENERATORS (ship s power): (3) 224 KW / 330 KVA DECK CRANE: Manitowoc 3900 or 4000 Boom Length 120 ft / 36.6 m
D/B BISSO 350 LOAD CHART
DIMENSIONS: Length: Width: Depth: Min Draft: 300 ft / 91.4 m 90 ft / 27.43 m 18.5 ft / 5.63 m 10 ft / 3m CLASSIFICATION: US Flag USCG COI ABS A1 Barge Classed # 8300379 CAPACITIES: Fuel: Water: Ballast: 48,000 gal / 153 t 104,000 gal / 393 t 1,092,000 gal / 4,133 t ELECTRONICS: Full Gyro Positioning Survey Equipment, Mesotech, SAT TV, Voice, Wx & Data, Radar, SSB GENERATOR: (2) 500 KW / 625 KVA, (1) 150 KW / 187.5 KVA MOORING: (6) Points: 3,600 ft x 1.75 / 1,100 m x 44.4 mm Per Drum Stall Rating: 200 kips Brake Holding Power: 225 kips (2 nd layer) Line Speed: Max 400 fpm / 121 mpm HELIDECK: 6,000 lbs 48 ft x 36 ft / 2.72 mt 14.6 m x 11m Anchors: Delta Flipper & Bruce FFTS Up to 14 st / 13 mt D/B BISSO 800 JETTING SYSTEMS: Portable Jet Pumps (available): (3) Union 6 x 10 x 13 MQF 4 Stage (2,800 GPM @ 1,150 PSI ea) (2) Patterson 10 x 10 DMD 2 Stage (3,000 GPM @ 300 PSI ea) Air Compressors: as required BOW CRANES: (2) American 11750 Boom: 160 ft / 48.8 m Max Capacity: 140 st / 127 mt
D/B BISSO 800 LOAD CHART
DIMENSIONS: Length: Width: Depth: Min Draft: Min Air Draft: 200 ft / 60.69 m 70 ft / 21.33 m 14 ft / 4.26 m 6 ft / 1.82m 40 ft / 12.19m CLASSIFICATION: US Flag ABS LOADLINE #7615539 Built 1976 GENERATOR: 40 KW STERN BOLSTER; 551 st / 500 mt CHAIN PULLER STERN LIFT/CUTTING: 330 st / 300 mt D/B CAPPY BISSO TRANSITING UNDER 40 BRIDGE STERN BOLSTER USED FOR CUTTING OPERATIONS
D/B CAPPY BISSO LOAD CHART
DIMENSIONS: Length: Width: Depth: Min Draft: 195 ft / 59.4 m 72 ft / 21.9 m 12 ft / 3.6 m 6 ft / 1.8m CLASSIFICATION: US Flag Built 1987 GENERATOR: 40 KW STERN BOLSTERS; (2) 300 st / 272 mt D/B LILI BISSO
D/B LILI BISSO LOAD CHART
DSV JOSEPH BISSO DIMENSIONS: Length: Width: Depth: QUARTERS: Vessel Crew: 9 Industrial Personnel: 27 180 ft / 54.8 m 44 ft / 13.4 m 15 ft / 4.5 m CLASSIFICATION: ABS All Oceans X A1, AMS Classed # 7905104 IMO # 7819656 USCG COI BUILT/CONVERTED: 1979 / 2007 FLAG: USA MAIN ENGINES: (2) EMD 12-345-E2 (3,000 BHP total) BOW THRUSTER: GM 8V71 (300 BHP) GENERATORS: (3) GenSets 450KW Total Available Power CRANE: Techcrane T60-56-100 30 st / 27.2 mt (Static) CLEAR DECK: 107 ft x 33 ft / 32.6 m x 10 m ELECTRONICS: SAT TV, Voice, VHF, Wx Fax & Data, Radar, SSB MOORING: (7) Points: 4,000 ft x 1 in / 1,371.6 m x 25.4 mm per drum Stall Rating: 146 kips Brake Holding Power: 150 kips Line Speed: Max 386 fpm / 117 mpm ENDURANCE: 30 Days Towing Fuel: 55,000 gal / 172.3 t Fresh water: 135,300 gal / 512.1 t (2) Water Makers PIPELAY EQUIPMENT: Work Stations: (1) Welding, (1) X-Ray/Doping Pipe Tensioner: Brake System Stinger Length: As Required PIPE BURIAL EQUIPMENT: Project Specific Portable Jet Pumps (available): (1) Union 6 x 10 x 13 MQF 4 Stage (2,800 GPM @ 1,150 PSI) (1) Patterson 10 x 10 DMD 2 Stage (3,000 GPM @ 300 PSI) (1) 6 x 6 Jet Pump - 1,400 GPM @ 40 PSI Air Compressors: As Required
SPUD BARGE BIG EAGLE DIMENSIONS: Length: Width: Depth: Min Draft: QUARTERS: FLAG: MOORING: SPUDS: CRANE: Project specific 155 ft / 47.2 m 50 ft / 15.2 m 12 ft / 3.6 m ~3 ft / <0.9m (bare barge) ~4.5 ft / 1.4m (with 175 st capacity crane) Portables, project specific USA (4) 1,200 ft x 1.125 in / 366 m x 29 mm wire Anchors, project specific (2) 30 in / 762 mm Ø (up to 70 / 21.3 m) Water Depth for Spuds 3 ft 50 ft / 0.9 m 15.2 m - depending on conditions SUPPORTING: Diving Marine Salvage Abandonment Construction Pipelay & Repair Pollution Clean Up Dredging Pile Driving Horizontal Directional Drilling Inland operations Coastal Operations Near Shore Operations (within 12 miles)
PRE & POST TRENCH PLOUGHING PIPELINE PLOUGHING
SELF PROPELLED TRACK SLED PIPELAY BURIAL Crawls on Pipeline Using Tensioner Style Pads Can Actively Pass Over an Anode, Will NOT Damage Coatings Can Bury Active Pipelines Bi-directional Travel at Controllable Speed Designed For All Types of Soils Pipe Range: 4 30 OD Inclusive of Coating Can Achieve First Pass Depth of Up to 4 Feet Can Be Adjusted For +16 Feet of Cover On Board Electronic Pipe Monitoring Available Anchored or DPII Deployment Overall Dimensions: 14 Long x 11.5 Wide (At Widest Point) x 19 Tall Weight 26,000 lbs (Sled Only in Air) (SCAN QR CODE WITH SMART PHONE FOR LINK TO SLED ANIMATION)
CONVENTIONAL PULL SLEDS PIPELAY BURIAL CONVENTIONAL PULL SLEDS Designed to Deliver High Pressure Air & Water to Emulsify Seafloor Soils Designed to Obtain the Standard Gulf of Mexico 3 Feet of Pipeline Cover Pipe Range: 2 12 OD, Will NOT damage FBE Pipe Coatings Can Be Adjusted For +16 Feet of Pipeline Cover Can Be Used to Uncover Pipelines for Removal Operations On Board Electronic Pipe Monitoring Available Dimensions and Weights vary by design
DUAL STAGE PULL SLED PIPELAY BURIAL DUAL STAGE PULL SLED up to 2,500 PSI & 9,600 CFM Designed to Deliver 2x High Pressure Jetting & Airlifting Designed For High Volume Output and Fast Speed for Sugar Sand Burial Pipe Range: 4 > 60 OD Inclusive of Coatings Can Achieve First Pass Ditch Depth of Up To 5 Feet (Depending on Soils) Can Be Adjusted For +16 Feet of Cover On Board Electronic Pipe Monitoring Available Narrow Version Overall Dimensions 31 6 Long x 20 Wide x 23 4 Tall ~50,000 lbs (Wet with Hoses) In Air ~34,000 lbs In Water Wide Version Overall Dimensions 31 6 Long x 40 Wide x 35 Tall ~58,000 lbs (Wet with Hoses) In Air ~42,000 lbs In Water (SCAN QR CODE WITH SMART PHONE FOR LINK TO SLED ANIMATION)
JET PUMP PACKAGES PORTABLE BURIAL PACKAGES Portable Jet Pump Systems: (4) 1,500 GPM @ 2,500 PSI (3) 2,800 GPM @ 1,150 PSI (2) 3,000 GPM @ 300 PSI
EXCAVATION TOOLS EXCAVATION TOOLS AIR LIFTS, JET STRINGS and PUMPS Custom Engineered and Designed For Specific Project Requirements. Designs from: 3 (76 mm) - 30 (760mm) Diameter Up to 80 (24.3 m) Long Major excavations have been performed to -110 (-33.5m) Below Mud Line @ -320 (-97.5 m) Water Depth
MESOTECH SONAR VERIFICATION BURIAL & EXCAVATION SURVEY
PIPELINE SURVEY AS-BUILTS, ANCHOR VERIFICATION & ANOMALY AVOIDANCE