67 CHIARA Round luinaire for installation on wall or ground recessed. Configuration: die-cast aluiniu structure, EN AB-47100 alloy (low copper content) and AISI 316L blasted stainless steel frae. Glass diffuser: Sandblasted with silkscreen border, fixed to the aluiniu body through a robotic gluing syste. Double layer coating for high resistance to corrosion: the aluiniu coponents are painted with a double coat using powders which are copliant with QUALICOAT standards: a first layer of epoxy powder (with excellent cheical and echanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atospheric agents). The entire painting process of the aluiniu fitting starts fro coponents which have been sandblasted in advance to ake the surface ore porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces copletely, then rinses with deineralised water to reove any residue particles, subsequently a cheical conversion treatent is done to protect against rusting. Protection rating: IP67 In copliance with EN 60598-1 standards Class of insulation: ains: I; low-voltage: III Installation: the luinaire is equipped with a piece of cable for an easy-to-ake connection. 0-30V version: the cable is supplied with a -way connector for 3-conductor cables (HO STOP) for an easy-to-ake connection. 4V version: the cable is integrated with an HO STOP device. Outdoor use requires suitable flexible cables. Installation requires a dedicated box separately. It is iportant to provide a >00 gravel layer or a drain syste (for concrete surface) to ensure good drainage and to avoid water stagnation. We recoend the use of a connection syste with a protection degree greater than or equal to the protection degree of the luinaire. EU Regulation 874/01 - Illuination equipent energy classes A ++ A + A.0 Inox VERSION: Class A/A+/A++ Luinaire supplied with integrated odules that cannot be replaced Recessed ground fitting Do not install in hollow areas Pre-wired with approx 50 of cable. Reote device required for 4V version Glass surface teperature <70 C HO STOP kg Recessed wall fitting Installation requires a 0c water drainage layer (gravel) Protection against water ingress fro the cable Static load: 500Kg walk over Protection against ipact. IK 08-5,00 joule Chiara 113
Chiara Mid-Power / Stainless Steel Frae - Sandblasted Glass - Direct 30V 530007 A A + A ++ 3,5W/0-30V l 400 l OUTPUT 199 odule set up to work directly connected to the ains 40 10 90 cd / 1000 l.00 1 3 1 6 13 3 54 14 = 60.0 + 60.0 = 60.0 + 60.0 530008 A A + A ++ 3,5W/0-30V l 380 l OUTPUT 189 odule set up to work directly connected to the ains DIRECT 30V Chiara Mid-Power / Stainless Steel Frae - Sandblasted Glass - Direct 30V 53000 A A + A ++ 6,5W/0-30V Total power 7W l 555 l OUTPUT 479 odule set up to work directly connected to the ains 400 10 90 cd / 1000 l.00 9 3 15 5 6 9 59 19 35 78 = 48.0 + 48.0 = 48.0 + 48.0 530003 A A + A ++ 6,5W/0-30V Total power 7W l 55 l OUTPUT 453 odule set up to work directly connected to the ains DIRECT 30V 53 114 Chiara
Chiara Mid-Power / Stainless Steel Frae - Sandblasted Glass - 4Vdc 530009 A A + A ++ 3,5W/4Vdc l 380 l OUTPUT 00 Reote electronic power supply 40 10 90 cd / 1000 l.00 1 3 1 6 13 3 54 14 = 60.0 + 60.0 = 60.0 + 60.0 530010 A A + A ++ 3,5W/4Vdc l 360 l OUTPUT 190 Reote electronic power supply Chiara Mid-Power / Stainless Steel Frae - Sandblasted Glass - 4Vdc 530005 A A + A ++ 6,5W/4Vdc Total power 7,3W l 734 l OUTPUT 394 Reote electronic power supply 400 10 90 cd / 1000 l.00 7 11 4 0 7 45 15 181 60 = 48.0 + 48.0 = 46.0 + 46.0 530006 A A + A ++ 6,5W/4Vdc Total power 7,3W l 707 l OUTPUT 308 Reote electronic power supply Chiara 115
116 Chiara
Accessories: Chiara 50 BOX FOR INSTALLATION Ø 160 H 70 15 3/4 WAY TERMINAL BLOCK 3 POLES IP68 HO STOP (Ø5,5 1 CABLE) 87 POWER SUPPLY 10W/110 40V - 4Vdc IP0 CLASS II SELV. 175 POWER SUPPLY 10W/110 40V - 4Vdc 70 Ø 115 Ø 160 54 80 3 0 14 4 79 150 144 POWER SUPPLY 17W/110 40V - 4Vdc (15W@110V) IP0 CLASS II SELV. 176 POWER SUPPLY 17W/110 40V - 4Vdc (15W@110V) 147 POWER SUPPLY 0W/0 40V - 4Vdc 155 POWER SUPPLY 50W/10 40V - 4Vdc 67 0 95 50 79 4 95 50 103 40 150 330 DIMMABLE: PUSH-DIM OR 1...10V See Page 514 Wiring Diagra n.4 DIMMABLE: PUSH-DIM OR 1...10V See Page 514 Wiring Diagra n.4 110 POWER SUPPLY 70W/0 40V - 4Vdc IP67 CLASS II SELV EQ. 156 POWER SUPPLY 96W /10 77V - 4Vdc 37 SPD: (SURGE PROTECTION DEVICE) 75Vac MAXIMUM DISCHARGE CURRENT 10KA (8/0µs) MAXIMUM OPERATING CURRENT 5A SUITABLE FOR SERIES CONNECTION - IP66 66 50 95 50 50 65 330 30 65 acc. code prod. code 50 15 87 175 144 176 147 155 110 156 37 53000 530003 530005 1 1 7 9 1 530006 1 1 7 9 1 530007 530008 530009 4 4 4 1 16 1 530010 4 4 4 1 16 1 fixtures for each power supply (Vin 0 40). Data in the chart are provided as a guide only. Please verify according to your installation. Chiara 117