Fire Rated Downlights 2013 Product Catalogue
WELCOME TO THE IMPROVED RANGE OF DETA FIRE RATED DOWNLIGHTS DETA have developed a new and improved range of Fire Rated Downlights. This new range features a metal loft insulation separator above the downlight to hold the insulation away from the fitting, thereby allowing for insulation to be laid continuously without the need for additional boxing. Our range of downlights allow for installations to comply with the requirements of Building Regulations Approved Document B - Fire Safety, which details the need to inhibit the spread of fire within a dwelling. Recessed downlights effectively become part of the internal lining when installed and as such, they must not affect the fire resistance of the ceiling and must adequately resist the spread of flames. The following premises are required to conform to the building regulations and depending on the type of building, the ceilings and fittings must be fire rated to either 30, 60 or 90 minutes Residential Housing Flats Care Homes Hospitals Schools/Colleges/Universities Shops/Commercial Properties Recreational Buildings Installation of DETA s Fire Rated Downlights allows compliance to Part B - Fire Safety of the Buildings Regulations, whether a 30, 60 or 90 minute fire barrier is required. DETA s Fire Rated Downlights feature a seal which prevents air movement through the light fitting and which helps reduce the build up of condensation. The seal also provides resistance to airborne and impact sounds, allowing the building to comply with Building Regulation Part E - Resistance to the Passage of Sound. For quick and easy installation, DETA s range of Fire Rated Downlights are supplied with the correct type and rating of lamp. The range includes mains voltage, low voltage and two types of low energy, 11W compact fluorescent lamps and LED lamps, in white and warm white colour temperatures. The DETA range of Fire Rated Downlights are available in a choice of white, chrome and satin chrome finishes and in a choice of fixed, tilt and IP65 shower versions, offering maximum versatility. All of DETA s Fire Rated Downlights are supplied complete with lamps - so installation could not be easier. 1 Sales Hotline 01582 544 544
Contents New Product Features...3 LED Low Energy Fire Rated Downlights...4 & 5 CFL Low Energy Fire Rated Downlights... 6 Mains Voltage Fire Rated Downlights... 7 Low Voltage Fire Rated Downlights... 8 Low Voltage Lighting Transformer... 9 Technical Hotline 01582 544 548 2
NEW PRODUCT FEATURES Large Loop in / Loop Out Terminal Block for ease of installation Detachable Terminal Bracket allows for smaller packaging and reduces the impact on the environment Spring Clips suitable for single or double thickness plaster board Twist & Lock lamp ring Bezel Holds Lamp IP 65 fittings Unique Patented Mechanism provides fire rating compliance (allows installation to meet Part B of the Building Regulations) Insulation Separator allows loft insulation to be laid over the top of the fittings Large Air Vents provide maximum heat dissipation 3 Gasket on Flange provides the seal to prevent movement of air, and reduces the passage of sound (Part E of the Building Regulations) Sales Hotline 01582 544 544
LED 4.5W Fire Rated Downlight Non Dimmable - Cool White Lamp Supplied complete with a Megaman GU10 4.5W Cool White (4000k) LED Lamp (300 Lumen) Mounting springs suitable for single and double thickness plaster board Twist and lock lampholder ring Available in white, chrome and satin chrome finishes 3 way terminal block for easy termination of T&E cable 2 year guarantee on fitting FIXED L1580WH4 Fixed - White L1580CH4 L1580SC4 IP65 Fixed - Chrome Fixed - Satin Chrome L1580WH4 L1580CH4 L1580SC4 L1582WH4 IP65 - White L1582CH4 L1582SC4 IP65 - Chrome IP65 - Satin Chrome L1582WH4 L1582CH4 L1582SC4 Installation Information Fixed Downlight IP65 Downlight Cut out Ø 74mm 74mm Min. Void Depth 165mm 175mm Lamp Specification * 4000k Cool White 5 Year Warranty *Supplied by Lamp Manufacturer Technical Hotline 01582 544 548 4
LED 4.5W Fire Rated Downlight Non Dimmable - Warm White Lamp Supplied complete with a Megaman GU10 4.5W Warm White (2800k) LED Lamp (300 Lumen) Mounting springs suitable for single and double thickness plaster board Twist and lock lampholder ring Available in white, chrome and satin chrome finishes 3 way terminal block for easy termination of T&E cable 2 year guarantee on fitting FIXED L1580WH3 Fixed - White L1580CH3 L1580SC3 Fixed - Chrome Fixed - Satin Chrome IP65 L1580WH3 L1580CH3 L1580SC3 L1582WH3 IP65 - White L1582CH3 L1582SC3 IP65 - Chrome IP65 - Satin Chrome 3 L1582WH3 L1582CH3 L1582SC3 Installation Information Fixed Downlight IP65 Downlight Cut out Ø 74mm 74mm Min. Void Depth 165mm 175mm Lamp Specification * 2800k Warm White 5 Year Warranty *Supplied by Lamp Manufacturer 5 Sales Hotline 01582 544 544
CFL Low Energy Fire Rated Downlight Supplied complete with a 11W CFL lamp Mounting springs suitable for single and double thickness plaster board Twist and lock lampholder ring Available in white, chrome and satin chrome finishes 3 way terminal block for easy termination of T&E cable 2 year guarantee on fitting FIXED L1570WH Fixed - White L1570CH Fixed - Chrome L1570SC Fixed - Satin Chrome IP65 L1570WH L1570CH L1570SC L1572WH IP65 - White L1572CH IP65 - Chrome L1572SC IP65 - Satin Chrome L1572WH L1572CH L1572SC Installation Information Fixed Downlight IP65 Downlight Cut out Ø 74mm 74mm Min. Void Depth 170mm 175mm Lamp Specification * 550lm 2700k Warm White *Supplied by Lamp Manufacturer Technical Hotline 01582 544 548 6
Mains Voltage Fire Rated Downlight Supplied complete with a Philips GU10 50W aluminised reflector (heat forward) lamp (35W lamp in IP65 fittings) Mounting springs suitable for single and double thickness plaster board Twist and lock lampholder ring Available in white, chrome and satin chrome finishes 3 way terminal block for easy termination of T&E cable 2 year guarantee on fitting FIXED L1540WH Fixed - White L1540CH Fixed - Chrome L1540SC Fixed - Satin Chrome TILT L1541WH Tilt - White L1540WH L1540CH L1540SC L1541CH Tilt - Chrome L1541SC Tilt - Satin Chrome IP65 L1542WH IP65 - White L1542CH IP65 - Chrome L1542SC IP65 - Satin Chrome L1541WH L1541CH L1541SC Installation Information Cut out Min. Void Ø Depth Fixed Downlight 74mm 165mm Tilt Downlight 82mm 165mm IP65 Downlight 74mm 175mm L1542WH L1542CH L1542SC 7 50W Lamp Specification * 35W Lamp Specification * 1000cd *Supplied by Lamp Manufacturer 2800k Warm White 36 Sales Hotline 01582 544 544 300cd 2800k Warm White 36
Low Voltage Fire Rated Downlight Supplied complete with a PHILIPS MR16 50W aluminised reflector (heat forward) lamp (35W lamp in IP65 fittings) Mounting springs suitable for single and double thickness plaster board Twist and lock lampholder ring Available in white, chrome and satin chrome finishes 2 year guarantee on fitting FIXED L1520WH Fixed - White L1520CH Fixed - Chrome L1520SC Fixed - Satin Chrome TILT L1521WH Tilt - White L1520WH L1520CH L1520SC L1521CH Tilt - Chrome L1521SC Tilt - Satin Chrome IP65 L1522WH IP65 - White L1522CH IP65 - Chrome L1522SC IP65 - Satin Chrome L1521WH L1521CH L1521SC Installation Information Cut out Min. Void Ø Depth Fixed Downlight 74mm 165mm Tilt Downlight 82mm 165mm IP65 Downlight 74mm 175mm L1522WH L1522CH L1522SC 50W Lamp Specification * 35W Lamp Specification * 1500cd *Supplied by Lamp Manufacturer 3000k Warm White 1050cd 3000k Warm White 36 36 Technical Hotline 01582 544 548 8
Low Voltage Lighting Transformer Electronic Transformer Dimmable with most resistive and inductive dimmers Supplied with 250mm input and output cables (LTR60) Case shaped for through hole or surface mount installation Resettable thermal, short circuit & overload protection 5 year guarantee Short circuit protection - safety cutout if output leads are shorted Overload protection - safety cutout if the load is above rated load Soft start - prolongs lamp life LTR60 60VA Transformer - Resettable LTR60 LTR60 Supply Voltage Output Voltage 240V ac 50Hz 11.6V ac Rated Load 20-60W Input Connection 250 x 0.75mm 2 Flex Cable Output Connection Single core PVC heat resistant flexible cable 0.75mm 2 Output Cable (max length) Dimmers Thermal Protection Short Circuit Protection Overload Protection Surge Protection Temp Range (ambient) Dimensions 2m Most resistive & inductive types Auto resets after the transformer has cooled down Auto resets after the fault condition has been removed Auto resets when the load has been changed to within limits of the transformer 1kV -20ºC to +50ºC 127 x 33 x 27mm Standards EN 61347-1:2001, EN 61347-2-2:2001 Standards (EMC) EN 55015:2000+A1, EN 61547:1995+A1, EN 61000-3-2:2000, EN61000-3-3:1995+A1 9 Sales Hotline 01582 544 544
SALES SUPPORT Whether you are a wholesaler, contractor, engineer, specifier or end user, our nationwide sales team is always on hand to help you with product selection. If you need assistance, give us a call on 01582 544 544 TECHNICAL SUPPORT Whether it is installation advice, problem solving or technical issues, call our Technical Support Line on 01582 544 548. A team of dedicated engineers is on hand to help answer your queries and resolve any issues. QUALITY ASSURED DETA is an ISO 9001 registered organisation. All our manufacturing is managed in a strict quality controlled environment. Our products are designed to a high specification to meet the relevant British and European Standards. DETA is also registered to ISO14001:2004 Environmental Management Systems. Technical Hotline 01582 544 548 10
Deta Electrical Company Limited Kingsway House, Laporte Way, Luton, Bedfordshire LU4 8RJ, UK T +44 (0) 1582 544500 F +44 (0) 1582 544545 E sales@detaelectrical.co.uk www.detaelectrical.co.uk V0513