New Downlighting Project: Location: Cat.No: LyteCaster Remodeler Type: Lamps: Notes: Qty: Round downlight Philips Lightolier LyteCaster LED Downlights are ideal general purpose downlighting solution, providing comfortable, quality light. Available in new and remodeler frame with interchangeable light engine that is offered in two lumen packages. The downlight is wet location listed and comes in 3 standard option. Complete product = Frame-in kit + Light engine + Trim Order each separately Ordering guide: Frame-In kit Example: AE1VA Lumens 1 Frame type Dimming voltage Version VA LyteCaster Round blank 2 2 2 2 A AirSeal IC, New Construction, Screw AN AirSeal IC, New Construction, Nail R AirSeal IC, Remodeler E ELV dimming 1 12V VA Version A 2 Z1-1V U Universal Ordering guide: Light engine Example: 827VA Lumens 1 CRI CCT Version VA LyteCaster Round 2 2 8 8 27 27K 3 3K K 4 4K 9 9 27 27K VA Version A 2 Note: Lumen output is calculated based on 8 CRI and K CCT. Please consult adjustment factors table on page for other lumen outputs. Ordering guide: Trim Example: DW Luminaire type Finish LyteCaster Round D Open Downlight D Clear diffuse (with white flange) W White (with white flange) B Baffle Downlight W White (with white flange) 1. When ordering a Frame-in kit and a Light engine, the lumen package code must match. 2. Version A (VA) frames and light engines are not compatible with previous versions. LyteCaster Downlight Spec 8/16 page 1 of
9/1 (141mm) FRAME-IN KIT (22mm) 7 1/1 (179mm) 24" (61mm) LyteCaster Round 2 / " General (141mm) purpose downlight 9/16 1/16 (342mm) 7 " (179mm)/8 11 " New frame-in kit 8 1/4" (21mm) Bottom view IGHT MODULE (342mm) 1 11 / 8 1/4" (21mm) (22mm) 2 / /1 (1mm) 24" (61mm) 7 3/ (188mm) DOWNLIGHT TRIM (22mm) 24" (61mm) 6 3/ Cut out 3 3/ (38mm)FRAME-IN KIT ADJUSTA Downlight trim Light engine FRAME-IN KIT 2 / 9/1 (141mm) 7 1/1 (179mm) LIGHT MODULE BOTTOM 1 VIEW 3 3/ Features Electrical (342mm) LIGHT MODULE 1. Housing:.2 galvanized steel. Lifetime: Expected lifetime 4. Retaining clips: Permit easy 6. Driver: ELV: 12V, 11 /6Hz. /8 " 1 UL listed for direct contact with, hours and backed by a RoHS compliant, Class 2 power 3/ fast installation of 6and 1 / thermal insulation. Airseal light engine/trim. (38mm) supply. Complies with FCC 8 4" -year warranty. (21mm) (see Philips.com/warranties housing minimizes air leakage rules per Title 47 Part (Class Cut out. Mounting bars:.9" 3/8 3 " to less than 2 CFM at 1.7PSF for details)baffle TRIM B) for EMI / RFI (conducted & ADJUSTABLE TRIM galvanized steel. Bars pivot (or 7PA), which complies for easy attachment and Recommended dimmers with Title 24, the International -1V: 12/277V, /6Hz. wire-in below ceiling line. Energy Conservation Code, and RoHS compliant, Class 2 power See LED-DIM Specification Sheet. Bars extend to accommodate Washington State Energy Code supply. Complies with FCC / (46mm) to 24" (61mm) 6 31 (Section 2.4). This reduces rules per Title 47 Part (Class (38mm) Labels O.C. joist spacing. Bars can heat loss and condensation A) for EMI / RFI (conducted & Cutaccommodate out 12" (mm) culus Listed Type I.C. frames in ceiling. Access door for O.C. joist spacing after a BAFFLE TRIMlocation. ADJUSTABLE TRIM are suitable for damp inspection of junction box. slight field modification (see 7. Ceiling cutout: 6 ⅜". Trims are culus suitable for 2. Lower frame and top cover: Instruction sheet). Features wet location (no shower lens Options and Accessories.2 galvanized steel. integral self tapping phillips/ unit 24" required). Complies with (22mm) (61mm) square drive screws for secure FRAME-IN KIT Accommodates ceilings up to For fire rated box accessory, use Air Leakage. Energy Star certified. 1 ½" (38mm) thick. 3/ (9.mm) attachment to wood or metal Fireline: Title 24 certified to meet high deep integral lip with four. Also available efficacy requirements. notches at 9 apart to simplify with integral nails. Attaches 16FR2X1 1 on center 2x1 alignment. Locks into position to T-bar ceilings without the along length of mounting bars need of accessories. Bars 16FR2X6 1 on center 2x6 with locking screws. installed on shortest dimension of frame,but can be easily 3. Junction Box: 2." X 3/ X repositioned 9 degrees from See Fireline spec sheets for more 2" (27 cu. in).32" galvanized original position. information. steel. UL listed 9 supply LIGHT MODULE conductors. Rated for branch circuit wiring supplying connected luminaires (daisy chaining). 1 LyteCaster Downlight Spec 8/16 page 2 of 3 3/ 6 3/ DOWNLIGHT TR DOWNLIGHT TR
LyteCaster Round Remodeler kit Bottom view 13 1/1 (332mm) 3/4" (146mm) 3 / (92mm) 3/ (137mm) 2 3/4" (7mm) 1/2 " (13mm) 6 3/ Features 1. Housing:.32 Aluminum. UL listed for direct contact with thermal insulation. Integral retaining spring secures housing to ceilings up to 2" thick. Removable for access to junction box and ceiling plenum. ½" maximum for use in 2" x joist and shallow plenum applications. Airseal housing minimizes air leakage to less than 2 CFM at 1.7PSF (or 7PA), which complies with Title 24, the International Energy Conservation Code, and Washington State Energy Code (Section 2.4). This reduces heat loss and condensation in ceiling. 2. Junction Box: 2 ½" x 2 ½" x 4 ⅞" (29 cu in.).31 galvanized steel. UL listed for 9 C supply conductors. Rated for branch circuit wiring supplying connected fixtures. 3. Retaining clips: Permit easy and fast installation of light engine/trim. 4. Driver: ELV /Triac: 12V, /6Hz. RoHS compliant, Class 2 power supply. Complies with FCC rules per Title 47 Part (Class B) for EMI / RFI (conducted & radiated). Class A sound rating. -1V: 12/277V, /6Hz. RoHS compliant, Class 2 power supply. Complies with FCC rules per Title 47 Part (Class A) for EMI / RFI (conducted &. Ceiling cutout: 6 ⅜". Electrical Lifetime: Expected lifetime, hours and backed by a -year warranty. (see Philips.com/warranties for details) Recommended dimmers See LED-DIM Specification Sheet. Labels culus Listed Type I.C., frames are suitable for damp location. Trims are culus suitable for wet location (no shower lens unit required). Complies with Air Leakage. Energy Star certified. Title 24 certified to meet high efficacy requirements. LyteCaster Downlight Spec 8/16 page 3 of
LyteCaster Round Reflector: Round downlight 1 Std 7 2 3 4 6 1. Housing: (. ) thick powder coated aluminum provides integrated thermal management allowing for a low profile at less than 3-1/2 tall. 2. LED board: High efficiency mid-flux LED s. 3. Mixing chamber: 98% reflective, highly diffuse film. 4. Diffusion lens: (.6 ) thick acrylic opal lens provides an even source of illumination.. Retaining ring: (.4 ) thick powder coated aluminum, secures module components. 6. Reflector: 3% glass reinforced injection molded polycarbonate is durable and provides a 7 cutoff to the source. 7. Retaining clips: 29 gauge Stainless Steel, allows tool-less installation of light engine to trim. Electrical specifications Frame-in kit / Remodeler Lumens volts freq. current LED drive current power LED power THD factor AE1VA / RE1VA 12V /6Hz.14A ma 16W 13W <2% >.9 AZ1UVA / RZ1UVA Power factor 12V /6Hz.14A ma 17W 13W <1% >.9 277V /6Hz.7A ma 17W W <% >.9 2AE1VA / 2RE1VA 2 12V /6Hz.17A 47mA 19W 16W <2% >.9 2AZ1UVA / 2R1UVA 2 12V /6Hz.26A 47mA 2W 16W <1% >.9 277V /6Hz.11A 47mA 2W 16W <% >.9 LyteCaster Downlight Spec 8/16 page 4 of
LyteCaster Round 8 CRI, lumens Candela Curves Angle Mean CP Lumens Single unit data Coefficients of utilization 2 4 6 8 1 2 2 3 4 4 6 6 7 7 8 8 9 73 724 412 698 671 634 96 38 473 397 314 2 161 17 8 9 37 16 69 197 292 336 34 21 Frame: AE1VA / AZ1UVA / RE1VA / RZ1UVA Light engine: 8VA Trim: DW Report no 3 : 686GFR Output lumens: 99 lm Watts 1 : 16 W Spacing Criterion: 1.2 Efficacy: 99.9 lm/w CCT 2 : K CRI: 8 111 62 18 Height to Lighted Plane 29 2 11 9 Beam Dia. (ft)* 6.' 7.2' 8.4' 9. 1. * Beam diameter is where foot-candles drop to % of maximum. Multiple unit data - RCR 2 Spacing on center 66.8 43.8 31.3 26.1 2.9 3x3x1' Room, Workplane 2. above floor, 8//2% Reflectances Watts per Sq. Ft..71.47.33.28.22 Ceiling 8% 7% % 3% % Wall 7 3 1 1 1 1 RCR Zonal cavity method - Effective floor reflectance = 2% Room Cavity Ratio Zonal lumens & percentages Zone Lumens %Luminaire -3-4 -6-9 119 119 119 119 116 116 111 111 16 16 1 1 11 16 12 99 14 97 1 94 96 92 87 2 12 94 88 83 92 82 89 8 86 79 7 3 94 84 77 71 83 71 8 69 77 68 6 4 86 76 68 62 74 61 72 6 7 6 7 8 68 6 4 67 4 6 3 63 3 6 74 62 4 48 61 48 9 47 8 47 4 7 69 7 48 43 6 43 4 42 3 42 4 8 6 2 44 38 1 38 38 49 38 36 9 6 48 4 47 46 4 34 33 1 7 44 37 32 44 32 43 32 42 31 3 8 893 148 99 34.6%.9% 88.1% 1.% CRI and CCT adjustment factors 9CRI 27K: =.71 8CRI 27K: =.89 8CRI 3K: =.97 8CRI K: = 1. 8 CRI, 2 lumens Candela Curves Angle Mean CP Lumens Single unit data Coefficients of utilization 3 6 9 3 6 1 2 2 3 4 4 6 6 7 7 8 8 9 Frame: 2AZ2UVA /2AE1VA / 2RZ1UVA / 2RE1VA Light engine: 28VA Trim: DW Output lumens: 189 lm Watts 1 : 19.8 W Spacing Criterion: 1.1 863 86 843 818 778 73 671 64 29 448 36 284 2 137 98 7 43 19 81 23 336 377 34 24 141 74 22 Report no 3 : 891GFR Efficacy: 93.9 lm/w CCT 2 : K CRI: 8 Height to Lighted Plane 24 18 13 11 Beam Dia. (ft)* * Beam diameter is where foot-candles drop to % of maximum. Multiple unit data - RCR 2 Spacing on center 77..8 36.3 3.3 24.2 3x3x1' Room, Workplane 2. above floor, 8//2% Reflectances. 6. 7. 8. 9. Watts per Sq. Ft..88.8.41.34.27 Ceiling 8% 7% % 3% % Wall 7 3 1 1 1 1 RCR Zonal cavity method - Effective floor reflectance = 2% Room Cavity Ratio Zonal lumens & percentages Zone Lumens %Luminaire -3-4 -6-9 119 119 119 119 116 116 111 111 16 16 1 1 11 16 12 99 14 97 1 94 96 91 87 2 11 94 88 83 92 82 89 8 86 78 7 3 93 84 77 71 82 7 79 69 77 68 6 4 86 7 67 61 74 61 72 6 69 9 6 8 68 6 4 67 3 6 3 63 2 6 74 62 3 47 61 47 9 47 7 46 44 7 69 6 48 42 42 4 42 3 42 39 8 64 2 44 38 1 38 38 48 38 36 9 6 48 4 47 46 34 4 34 32 1 7 44 37 32 44 32 43 31 42 31 29 647 123 1622 189 34.8%.1% 87.3% 1.% CRI and CCT adjustment factors 9CRI 27K: =.71 8CRI 27K: =.89 8CRI 3K: =.97 8CRI K: = 1. 1. Wattage: controlled to within ± % 2. Correlated Color Temperature: within specs as defined in ANSI_NEMA_ANSLG C78.377-28: Specifications for the Chromaticity of Solid State Lighting Products. 3. Tested using absolute photometry as specified in LM79: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. 216 Philips Lighting Holding B.V. All rights reserved. Philips reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. philips.com/luminaires LyteCaster Downlight Spec 8/16 page of Philips Lighting North America Corporation 2 Franklin Square Drive, Somerset, NJ 8873 Tel. 8-486-2216 Philips Lighting Canada Ltd. 281 Hillmount Rd, Markham, ON, Canada L6C 2S3 Tel. 8-668-98