CITOTIG II DC Industrial range The best of TIG welding using inverter technology for the most demanding welders. www.oerlikon-welding.com
CITOTIG II DC Industrial range Single or three-phase portable inverters for MMA and TIG DC high quality work on non-alloyed or stainless steels. 2570-2 CITOTIG II 200 DC, 300 DC (W), 00 DC (W) Reduced weight and size, high-resistance steel cabinet, maximum safety with the built-in VRD (Voltage Reduction Device), unit transportable using dedicated carriages for work in severe conditions. Possibility to connect to a remote control or foot-operated pedal and separate gas to torch connection, protection against dust and spatter, the user friendliness is increased due to the controls grouped on the front panel. Product advantages: Multi-process unit: TIG DC, MMA (all stick electrode) Continuous, spot, pulsed welding Complete welding cycle 2 current levels with CITOSTEP function) HF or contact arc striking Synergic pulsed system Automatic hot start for easier arc striking according to type of coated electrode used Adjustable arc dynamics to optimize electrode melting according to electrode type (rutile, basic or cellulosic) Modular: air or water cooled VRD available HF arc striking 2T / T Adjustable pre and post-gas Adjustable arc dynamics 20-30 MODULAR Technical characteristics CITOTIG II 200 DC CITOTIG II 300 DC (W) CITOTIG II 00 DC (W) Primary power supply, 230 V single-phase (+/-0%) 00 V three-phase (+20% / -5%) Absorbing power at maxi. intensity 6.5 kva 8. kva 3.8 kva Open circuit voltage 80 V 80 V 80 V at 35% 200 A 300 A 00 A Duty cycle at 60% 50 A 230 A 320 A at 0 C at 00% 30 A 200 A 270 A Welding current 5 to 200 A 5 to 300 A 5 to 00 A Electrode diameter max..0 mm 5.0 mm 6.0 mm Dimensions Power source 0 x 80 x 390 mm 500 x 80 x 390 mm (l x w x h) Power source + Cooling unit - 500 x 80 x 650 mm Weight Power source 5 kg 20 kg 3 kg Power source + Cooling unit - 30 kg kg Standards EN 6097- ; EN 6097-0 Power source W000279732 W000279733 W00027973 Option and accessories COOLERTIG II DC W000279722 Trolley T3 W000277087 Manual remote control 5 m W0002633 (RC) 0 m W00027032 (RC) Foot-operated remote control W00026333 (FP)
CITOTIG II DC Industrial range Ultimate performance in all conditions 355-009 Designed to meet the expectations of the most demanding welders, CITOTIG II DC welding units were developed in detailed correlation with on-going changes in requirements. They provide optimum performance associated with the ruggedness necessary for daily work both in the workshop and on site. They all have a complete welding cycle including 2 current levels with the CITOSTEP function. CITOTIG II DC High quality welding results on carbon and stainless steels. For high demanding sectors of activity. Petrochemicals 200-37 200-36 Boiler making Offshore Shipbuilding Piping 2008-760 20-05 20-0 20-03 200-835 200-80
20-7 20-6 With the CITOSTEP function, two current levels can be chosen, the welding current and the basic current. This facilitates the change from one to the other by rapidly pressing the torch trigger. The CITOSTEP function can be used to adjust heat input momentarily, to change welding positions or to replenish the filler metal supply without having to stop welding. CITOTIG II front panel 2 3 5 7 9 6 8 0 2 2 3 5 6 7 8 9 0 2 Power on indicator Thermal safety indicator Supply voltage defect indicator Pulsed TIG / Synergic pulsed TIG / Spot TIG selection Post-gas adjustment Welding parameters adjustment Display Welding parameter selection keys 2T / T / CITOSTEP selection MMA welding selection Memorization parameters selection Local/remote control selection Pulsed TIG and synergic pulsed TIG Because all pulse parameters can be adjusted, the pulsed TIG process allows better control of the weld pool. The synergic pulsed system is an additional mode proposed to make adjustment of the unit easier. With the synergic pulsed system, there is no need to adjust the welding current or other pulse parameters that may have been pre-programmed. The pulse frequency gives a high, concentrated arc and increases welding speed. 20-6 Options and accessories for CITOTIG II DC Remote control Foot-operated control pedal 200-270 Trolley T3 2006-69 RC for direct current range 5 m W0002633 0 m W00027032 2006-65 FP for direct current range 5 m W00026333 A trolley for easy transport of: CITOTIG II COOLERTIG II cooling unit Gas cylinder (size B20 max.) Torches and accessories that can be carefully stored or rolled Trolley T3 W000277087
TIG torches The new range of CITORCH T NG TIG torches perfectly fit with the high level of quality provided by the CITOTIG DC professional range. 2000-73 The adapted models are CITORCH T 20, 0, 0W or 35W (air or water cooled torches). They come: either with trigger as a blade: RL models or as a button: EB types. The EB types are modular as they can be modified with the different type of buttons. See complete range in the CITORCH T NG brochure Modular system: All torches are delivered with a single button module. If you want another control module, order it separatly. 2 3 20-007 20-005 CITORCH T NG 20 CITORCH T NG 0 CITORCH T NG 0W CITORCH T NG 35W Cooling Air Water 50 A at 35% 250 A at 35% Duty Cycle 250 A at 00% 350 A at 00% 00 A at 60% 200 A at 60% 5 m: W000278986 8 m: W000278987 Cat. number maintenance box 5 m: W000278890 8 m: W00027899 RL: Blade 5 m: W000278992 8 m: W000278993 5 m: W00027899 8 m: W000278995 W0003062 W000306 W000306 W000306 200-63 Horizontal potmeter - W000279370 Vertical potmeter - W00027926 Doublon button - W00027922 Blade - W00027925 For potmeter adapt the wiring to the welding machine using the 7 pins plug - W00027826 2 3 In option: Adjustable heads As an option, adjustable torch bodies are available. Welding in inaccessible locations becomes easier. You have the choice of 2 heads, small and large to be mounted on air cooled or water cooled bodies. 200-668 20-007 200-98 CITORCH T NG 20 CITORCH T NG 0 CITORCH T NG 0W CITORCH T NG 35W Cooling Air Water 50 A at 35% 250 A at 35% Duty Cycle 250 A at 00% 350 A at 00% 00 A at 60% 200 A at 60% 5 m: W000278382 8 m: W000278383 Cat. number maintenance box 5 m: W000278386 8 m: W000278387 EB: Button 5 m: W000278388 8 m: W000278389 5 m: W000278390 8 m: W00027839 W0003062 W000306 W000306 W000306 Air cooled body - W00027938 Water cooled body - W000279382 Head CITORCH T NG 0 - W000279383 Head CITORCH T NG 20-30 - W00027938 200-99