PRICE LIST 2012 Effective February 1, 2012 Rev -2

PRICE LIST 2012 Rev -2

TABLE OF CONTENTS PDQ LOCKS TERMS & CONDITIONS...Page 2 LIMITED WARRANTY...Page 3 FINISHES & HANDING CHART...Page 4 EASY ORDER FORM...Page 5 MASTER KEY SYSTEM PLANNING FORM & KEYING SCHEDULE...Page 9 WEIGHT CHART...Page 11 MR GRADE 1 REVOLUTION SERIES MORTISE LOCK...Page 13 MR FORGED F TRIM...Page 21 MR STAINLESS J TRIM...Page 23 MR STAINLESS W TRIM...Page 25 J SERIES DECORATIVE TUBULAR LATCHES...Page 31 XGT GRADE 1 SPIRIT SERIES CYLINDRICAL LOCKSETS...Page 35 GT GRADE 1 SPIRIT SERIES CYLINDRICAL LOCKSETS...Page 43 SX GRADE 1 SERIES CYLINDRICAL LOCKSETS...Page 53 GP GRADE 2 SPIRIT SERIES CYLINDRICAL LOCKSETS...Page 59 SA GRADE 2 SPIRIT SERIES CYLINDRICAL LOCKSETS...Page 67 SD GRADE 2 SERIES CYLINDRICAL LOCKSETS...Page 75 SV GRADE 2 SERIES CYLINDRICAL LOCKSETS...Page 83 SE GRADE 2 SERIES TUBULAR LOCKSETS...Page 89 CL GRADE 2 SERIES INTER-CONNECTED LOCKS...Page 95 SR GRADE 3 SERIES CYLINDRICAL LOCKSETS...Page 99 KT SERIES DEADBOLTS...Page 105 KM SERIES DEADBOLTS...Page 111 KV SERIES DEADBOLTS...Page 117 KR GRADE 3 SERIES DEADBOLTS... Page 123 HSCYL HIGH SECURITY CYLINDERS & CORES...Page 127 CYL CYLINDERS & KEYING...Page 128 ACC ACCESSORIES...Page 130 PDQ DOOR CLOSERS 3100 SERIES DOOR CONTROLS...Page 131 5100 SERIES DOOR CONTROLS...Page 135 5300 SERIES DOOR CONTROLS...Page 139 5500 SERIES DOOR CONTROLS...Page 143 7100 SERIES DOOR CONTROLS...Page 147 PDQ EXIT DEVICES 4200 SERIES EXIT DEVICES...Page 151 4200 SERIES NARROW STILE EXIT DEVICES...Page 157 6200 SERIES EXIT DEVICES...Page 161 6200 SERIES NARROW STILE EXIT DEVICES...Page 167 MUL MULLIONS...Page 171 PDQ HINGES HINGES...Page 173 PDQ ELECTROMECHANICAL HARDWARE INTRODUCTION...Page 177 LOCKS...Page 178 EXIT DEVICES...Page 181 ELECTRIC STRIKES...Page 183 ACCESSORIES...Page 184 PDQ DISPLAYS DISP DISPLAYS...Page 185 1

TERMS & CONDITIONS PRICES All prices are subject to change without prior notice and are not guaranteed. All prices are per unit (each) unless otherwise specified and do not include sales or local taxes. ERRORS AND OMISSIONS While PDQ Manufacturing makes every effort to provide an accurate price list, we are not responsible for errors and/or omissions which may appear. Customers will be invoiced the actual and true price on all orders. CREDIT TERMS The standard credit terms of PDQ Manufacturing are 1% 10 days net 30. Net 30 days means the check is received at PDQ on or before 30 days from the date of the invoice. Interest will be charged at the rate of 1-1/2% per month on past due accounts. A $25.00 fee will be charged for all Returned Checks. ACCEPTANCE OF ORDERS Possession of prices from PDQ Manufacturing does not commit PDQ to accept any order. PDQ Industries reserves the right to refuse any order or request for quotation and will not be bound to fill any order until it has been accepted by a representative of PDQ and confirmed by a written acknowledgement. Quotations are valid for the period stated on the official quotation request form. Orders must be submitted in writing. ACKNOWLEDGEMENTS An Acknowledgement is an exact copy of a customer s order as entered by PDQ and should be verified by the customer. If the Acknowledgement does not agree with customer s understanding, PDQ should be advised within three (3) days or the order will be billed as acknowledged. PDQ Manufacturing s sales terms shall apply irrespective of any special stipulation appearing in customer orders, unless specifically acknowledged and accepted by PDQ Manufacturing, Inc. Estimates of delivery are made by PDQ Manufacturing in good faith and are not guaranteed. PDQ Manufacturing does not assume responsibility for delay in deliveries. PRODUCT RETURN Products may not be returned unless customer receives written authorization from PDQ. If the return is authorized by PDQ a Return Goods Authorization (RGA) number will be issued to the customer. Products returned must have the RGA number clearly marked on the outside of the box and reach PDQ within 45 days from the date RGA is issued. All documentation and RGA number must accompany the return along with the original invoice number and an explanation why the material is being returned so that PDQ may inspect the material in question. Only material that has been in customer s inventory for less than 60 days from the invoice date, is current standard, non-obsolete and not specially manufactured, unused and in their original condition and original packaging will be considered for return. Master keyed items cannot be returned for credit. If the product is accepted for a return there will be minimum 35% processing charge of the net material value on the original invoice, less freight and cash discounts. Full credit against future purchases or replacements will be made at the option of PDQ. Care must be taken to package all returns to ensure that they are not damaged in shipment. PDQ will not credit items returned that have not been properly packed and as a result sustain damage in shipment back to our facility. FORCE MAJEURE PDQ will not be held responsible for delays in delivery caused by strikes, acts by government agencies, fires, floods or any other causes beyond our control, including the delivery of material to us. Under no circumstances shall PDQ be liable or accountable for consequential damages due to failure of delivery. INVOICES Copies of invoices are available on website. Contact Customer Service on information on how to retrieve. MINIMUM CHARGE Orders of 12 pieces or less will be billed at a 50/25 discount. CHANGES OR CANCELLATIONS When a special order is entered, no change can be made and the order is non-cancelable. Changes to master key jobs made less than eight (8) days prior to shipment will be treated on a job-by-job basis. Cancellation of items already packed for shipment will be removed if possible with a twenty-five (25%) percent restock charge. CLAIMS Every possible care is taken in the final examination and packing of goods, and no complaints can be entertained unless made promptly on receipt of goods. No claim will be allowed for work done by others, consequential damages, or other expenditure, and PDQ s undertaking to repair or replace defective goods is its only liability. No claim for damage, shortage or loss in transit will be considered unless notice in writing is given to the carrier and to PDQ Industries within ten (10) days of receipt of goods. BACK CHARGES PDQ is not responsible for, does not authorize, and will not accept any charges for the cost of labor or material incurred by anyone other than PDQ Manufacturing for any installation, repair, service or replacement unless incurred with PDQ s prior written consent and agreement. FREIGHT CHARGES FOB point is Leola, PA, Carson, CA or N. Kansas City, MO. Ship location is at factory discretion. Freight charges are prepaid and added to invoice. C.O.D. freight charges are paid by consignee. If invoice exceeds $1,900 Net, full surface freight (UPS or truck) within continental U.S.A. is deductible, provided invoice is paid within terms. Air freight and other special shipments are not deductible. Freight allowance methods are at the discretion of PDQ. DISCONTINUANCE PDQ Manufacturing, Inc. reserves the right to discontinue or change any price, product, design, function and finish without prior notice. FINISHES Although PDQ applies the finest protective coatings to the surface of its products, these protective coatings have their limitations, and in time may deteriorate from extremes of climate, frequency of use, perspiration or other factors. PDQ does not consider excessive wear or tarnishing of these finishes as a result of any of the above conditions as a defect, but rather a normal process which cannot be avoided. Thus, PDQ cannot guarantee product finishes and will not repair or replace finishes with this Warranty. 2

WARRANTY GRADE 1 LOCK PRODUCT MR Series Mortise Locks Lifetime Warranty XGT Spirit Series Lifetime Warranty GT Spirit Series 25-Year Warranty SX Series 5-Year Warranty GRADE 2 LOCK PRODUCT GP Series 8-Year Warranty PDQ MANUFACTURING LIMITED WARRANTY PDQ warrants that its products sold under the PDQ and American Eagle trade name in the United States of America are free from defects in workmanship and materials under normal use and service. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, corrosion, erosion, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-pdq or American Eagle products or parts. SA Series SD Series SV Series SW Series SE Series CL Series K Series SR Series GRADE 3 LOCK PRODUCT 5-Year Warranty 5-Year Warranty 1-Year Warranty 1-Year Warranty 1-Year Warranty 2-Year Warranty 1-Year Warranty 1-Year Warranty This warranty is void if any modification is made to the warranty product, regardless of whether the modification causes or contributes to the alleged defect. All modifications are made at the risk of the party making the modification. The only liability of PDQ and or American Eagle, in tort or contract whether under this warranty or otherwise, shall be limited to the repair or replacement of any product or component part which shall prove defective as covered by this warranty, within the stated time period listed below, after delivery to the original purchaser. This Limited Warranty does not apply to ANSI A156.2 Grade 2 Key-In-Lever product installed on Educational Facilities. J SERIES DECORATIVE TUBULAR J Series 5-Year Warranty CLOSERS 3100 Series 25-Year Warranty 5100 Series 25-Year Warranty 5300 Series 25-Year Warranty 5500 Series 25-Year Warranty 7100 Series 25-Year Warranty EXIT DEVICES 4200 Series 5-Year Warranty 6200 Series 10-Year Warranty/1-Year Electric Components MULLIONS CYLINDERS, FACTORY OR FIELD COMBINATED Cylinders shall be periodically lubricated depending on environmental conditions. Dry graphite, molybdenum disulfide or Polylube(trademark) are recommended. Petroleum based liquid lubricants should only be used in cylinders in harsh or corrosive environments and should not be mixed with dry lubricants. PDQ and or American Eagle will not pay for the cost of repair performed other than in accordance with this warranty. Refer to our Returned Goods Policy regarding the return of a product or component part believed to be defective as covered by this warranty. A brief description of the defect will be required. Product will be examined upon return. In the event such examination reveals a defect covered by this warranty, the product will be repaired or replaced. If the product is deemed not to be "in warranty", it will be returned at customer's expense. Mullions 1-Year Warranty HINGES THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY LAW, Commercial Hinges 5-Year Warranty ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. PDQ MANUFACTURING and AMERICAN EAGLE LOCK COMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. NO AGENT, SALES REPRESENTATIVE OR DEALER HAS THE AUTHORITY TO INCREASE OR ALTER THE OBLIGATIONS OF THIS WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. 3

FINISHES & HANDING PDQ MANUFACTURING FINISHES PDQ Manufacturing finishes are durable, top-quality finishes obtained by the processing of solid brass, bronze, stainless steel and other materials. It is important that usage, climate and other conditions be taken into consideration when selecting finishes. This is especially true in areas subjected to corrosive vapors, humid climate or sea air, which in short time may have a damaging effect on finishes. To preserve appearance, cleaning and care may be required. Non-clear coated finishes should not be cleaned with soap or solvents; organically coated surfaces should be cleaned periodically with mild, non-abrasive soap and buffed lightly with a clean cloth. Contact PDQ technical service for recommendations on the care of finished hardware. BHMA symbols and U.S. Code Designations (noted below in parentheses) are used in some cases to indicate the similarity of finish appearance, regardless of the base material. REFER TO EACH LOCK SERIES SECTION FOR STANDARD FINISH AVAILABILITY. SYMBOL DESCRIPTION PLATED 605 (US3) Bright Brass, Clear Coated 606 (US4) Satin Brass, Clear Coated 609 (US5) Antique Brass, Satin Brass, Blackened, Satin Relieved, Clear Coated 611 (US9) Bright Bronze, Clear Coated 612 (US10) Satin Bronze, Clear Coated 613 (US10B) Oil Rubbed Bronze, Oxidized Satin Bronze, Oil Rubbed, No Coating 625 (US26) Bright Chromium Plated, No Coating 626 (US26D) Satin Chromium Plated, No Coating 629 (US32) Bright Stainless Steel, No Coating 630 (US32D) Satin Stainless Steel, No Coating SYMBOL DESCRIPTION PAINTED 689 (US28) Aluminum 690 (US20) Dark Statuary Bronze 691 (US21) Light (Dull) Bronze 695 () Dark Bronze Anodized 696 (US4)) Satin Brass (Gold) Please Note: PDQ Manufacturing reserves the right to refuse any order for non-standard finishes without incurring any obligation. PDQ Manufacturing cannot guarantee finishes and will not replace or repair finishes as a result of any of the above conditions under the terms of the Limited Warranty. A number of the finishes offered require hand relieving, and as such, they cannot be guaranteed for coloring or graining as each piece is unique. DOOR LOCKS HANDING In Swing Door Out Swing Door LH OUTSIDE Hand of door always determined from outside RH OUTSIDE LHR RHR 4

FAST ORDER FORM PAGE 1 12 Piece Minimum Order Required Customer Order Number Ship Via Page of Name Ship To Date Territory City Order Number State Zip Customer Account Number Job Name Mark Shipment Customer Signature Keying Instructions ORDER QTY FINISH ANSI FUNCTION FUNCTION PDQ PART NUMBER ORDER QTY FINISH ANSI FUNCTION FUNCTION PDQ PART NUMBER NON-DEADBOLT FUNCTIONS-SECTIONAL TRIM F22 Privacy MR 176 F01 Passage MR 126 F07 Storeroom MR 115 F22 Privacy MR 176 F04 Entrance MR 116 F07 Storeroom MR 115 F05 Classroom MR 148 F04 Entrance MR 116 DEADBOLT FUNCTIONS-ESCUTCHEON TRIM F05 Classroom MR 148 F13 Corridor MR 136 DEADBOLT FUNCTIONS-SECTIONAL TRIM NA Entrance MR 154 F13 Corridor MR 136 F34 Classroom Security MR 157 NA Entrance MR 154 F20 Dormitory MR 162 F34 Classroom Security MR 157 GRADE 1 CYLINDRICAL LOCKS NON KEYED FUNCTIONS F20 Dormitory MR 162 NA Communicating GT 125 NON-DEADBOLT FUNCTIONS-ESCUTCHEON TRIM F75 Passage GT 126 F01 Passage MR 126 F76 Privacy GT 176 5

FAST ORDER FORM PAGE 2 12 Piece Minimum Order Required ORDER QTY FINISH ANSI FUNCTION FUNCTION PDQ PART NUMBER ORDER QTY FINISH CERTIFICATION FUNCTION PDQ PART NUMBER GRADE 1 CYLINDRICAL LOCKS KEYED FUNCTIONS CLOSERS F86 Storeroom GT 115 UL and ULC listed ANSI A156.4 F81 Privacy GT 116 Grade 1 / Complies with UL 10C and F110 Classroom Security GT 135 UBC 7.2 (1997) Closer, Non Sized 3-6, SNB 3101 BCPA 689 F84 Classroom GT 148 F90 Dormitory GT 165 F82 Entry GT 182 GRADE 2 CYLINDRICAL LOCKS NON KEYED FUNCTIONS NA Communicating GP 125 F75 Passage GP 126 F76 Privacy GP 176 UL and ULC listed / Complies with UL 10C and UBC 7.2 (1997) / requirements of ANSI A156.4-2000 Grade 1 / Meets the requirements of ANSI A117.1 and ADA Closer, non-sized 1-6, full cover, SNB 5101 BCPA 689 NA Single Dummy GP 211 GRADE 2 CYLINDRICAL LOCKS KEYED FUNCTIONS F86 Storeroom GP 115 F81 Entrance GP 116 F84 Classroom GP 148 F82 Entry GP 182 UL and ULC listed / Complies withul 10C and UBC 7.2 (1997) / Certified ANSI A156.4-2000 Grade 1 / Meets the requirements of ANSI A117.1 and ADA Closer, non-sized BF-6, streamline cover, SNB 5301 BCPA 689 6

FAST ORDER FORM PAGE 3 12 Piece Minimum Order Required Customer Order Number Ship Via Page of Name Ship To Date Territory City Order Number State Zip Customer Code Number Job Name Mark Shipment Customer Signature Keying Instructions ORDER QTY FINISH CERTIFICATION FUNCTION PDQ PART NUMBER ORDER QTY FINISH CERTIFICATION FUNCTION PDQ PART NUMBER CLOSERS (CONT) EXIT DEVICES UL and ULC listed / Complies withul 10C and UBC 7.2 (1997) / Certified ANSI A156.4-2000 Grade 1 / Meets the requirements of ANSI A117.1 and ADA Closer, non-sized BF-6 Full Cover, SNB 5501 BCPA 689 UL/ULC listed for Panic, Fire Exit Hardware labeled for up to 1-1/2 hour for 3 0 x 7 0 maximum Exit, rim, UL panic listed, hex key dogging, 3 0 door 4200R 689 UL and ULC listed / Complies withul 10C and UBC 7.2 (1997) / Conforms to the requirements of ANSI A156.4-2000 Grade 1 / Meets the requirements of ANSIA117.1 and ADA Closer, non-sized 1-6, full cover, SNB 7101 BCPA 689 UL/ULC listed for Panic, Fire Exit Hardware labeled for up to 1-1/2 hour for 3 0 x 7 0 maximum Exit, surface vertical rod, UL panic listed, hex key dogging, 3 0 door 4200V 689 7

FAST ORDER FORM PAGE 4 ORDER QTY FINISH 12 Piece Minimum Order Required ANSI FUNCTION FUNCTION PDQ PART NUMBER ORDER QTY FINISH ANSI FUNCTION FUNCTION PDQ PART NUMBER EXIT DEVICES (CONT) EXIT DEVICE TRIM UL/ULC listed for Panic, Fire Exit Hardware labeled for up to 3 hours for 4 0 x 8 0 Exit, rim, UL maximum pairs / panic listed, Complies with UL hex key dogging, 10C and UBC 7.2 3 0 door (1997) / Certified to ANSI BHMA/BHMA A156.3-2001 Grade 1 6200R F08 Trim, lever, HD wide escutcheon, keyed, classroom F08 429 LPEKFH F08 Trim, lever, wide escutcheon, keyed, classroom F08 629 LPEKFH UL/ULC listed for Panic, Fire Exit Hardware labeled for up to 3 hours for 4 0 x 8 0 Exit, surface maximum pairs / vertical rod, UL Complies with UL panic listed, 10C and UBC 7.2 hex key dogging, (1997) / Certified 3 0 door to ANSI BHMA/BHMA A156.3-2001 Grade 1 6200V 8

MASTER KEY SYSTEM PLANNING FORM Sold To: Ship To: Sheet 1 of Date Purchase Order No. Job Name and Address: System Info: NEW Existing System PDQ SO # Your original PO# Original date of order Key Quantity: Qty GGGM GGM GGM GM MK/Group Change Keys: Qty Per Cylinder Per Keyed alike Group Per Keyed different cyl. Special Function Qty Control Main CMK HKP CMK Ctrl MECH EMK ENG SKD Ctrl JAN SKD CMK OTHR Blockout OTHR System Level: 1-SKD 2-MK 3-GM 4-GGM 4-GGGM 4-GGGGM Cross Keying: Key Symbol Operated by (OB) Type: High Security IC Standard Other Keys: Standard SCC Restricted* Specific Keyway: *Restricted Keyway requires system approval 5 Pin 6 Pin 7 Pin Key Control: Visual Key Control Keys Only Visual Key Control Keys and Cylinders Visual Key Control Cylinders Only Concealed Key Control Keys and Cylinders Concealed l Key Control Cylinders Only DND US Property DO NOT DUPLICATE Special Marking: Additional Information: (Including system expansion and Special Remarks) Name of individual in organization who is knowledgeable about this project should clarification be required. Name: Phone: Premium Quality without the Premium Price 2754 Creek Hill Road, Leola, PA 17540 1-800-441-9692 This sheet to be used with Keying Schedule Form 9

KEYING SCHEDULE Customer Name: Purchase Order No. Page of Quantity: Series/Function/Trim: Finish: Options: Special Stamping: Item Quantity Key Symbol Hand (Specify Qty) RH LH RHR LHR Door Number (Up to 10 Characters) Heading (Up to 10 Characters) Premium Quality without the Premium Price 2754 Creek Hill Road, Leola, PA 17540 1-800-441-9692 To be used with PDQ Master Keying Layout form 10

WEIGHT CHART LOCKSETS* Item Function Case Quantity Average Weight/Case (lbs.)** MR (Rose) Entrance 6 45 MR (Escutcheon) Entrance 6 46 XGT Entrance 6 33 GT Entrance 6 33 GP Entrance 6 30 SA Entrance 6 29 SD Entrance 10 37 SX Ball Entrance 10 32 SV Ball Entrance 20 43 SE Entrance 10 32 CL Entrance 10 52 SR Ball Entrance 20 27 SR LV Entrance 10 17 DEADBOLTS Item Function Case Quantity Average Weight/Case (lbs.)** KT Single Cylinder 116 10 19 KT Double Cylinder 137 10 22 KM Single Cylinder 116 20 41 KM Double Cylinder 137 20 54 KV Single Cylinder 116 20 26 KV Double Cylinder 137 20 35 KR Single Cylinder 116 20 26 KR Double Cylinder 137 20 35 CLOSERS Item Function Case Quantity Average Weight/Case (lbs.)** 3100 Tri-Pack 10 61 5100 Tri-Pack 6 48 5300 Tri-Pack 6 41 5500 Tri-Pack 6 41 7100 Tri-Pack 4 50 EXIT DEVICES Item Function Case Quantity Average Weight/Case (lbs.)** 4200R 3 Rim 4 43 4200V 3 Vertical 4 61 4200RA 4 Rim 4 45 4200VA 4 Vertical 4 67 6200R 3 Rim 4 55 6200V 3 Vertical 4 76 6200RA 4 Rim 4 61 6200VA 4 Vertical 4 82 *Data is with PHL lever unless otherwise noted. **Add approximately 2 lbs. for fire rated device. 11

ASSEMBLED IN USA GRADE 1 MR EXTRA HEAVY DUTY SERIES MORTISE LOCK SPECIFICATIONS FOR DOORS: BACKSET: 2-3/4" CASE: FRONT: STRIKE: LATCHBOLT: DEADBOLT: HAND: TRIM: KEYS: KEYWAYS: INTERCHANGEABLE CORE: CYLINDER: KEYING: MR SERIES J TRIM MR SERIES W TRIM 1-3/4" to 2" standard (2-1/4" special order - not available in all functions or in J trim) 13-gauge cold rolled steel mechanism / Dichromated for corrosion resistance Beveled 1/8" on 2" / 626 (US26D) & 630 (US32D) use stainless steel as base material, all other colors use brass as base material Handed Curved Lip Strike / 626 (US26D) & 630 (US32D) use stainless steel as base material, all other colors use brass as base material 3/4" Throw / Investment Cast Stainless Steel / Anti-friction 1" Throw / Investment Cast Stainless Steel Most functions field reversible. Designate hand for strikes, consult factory for details F trim - solid forged brass levers, escutcheons and turns. J trim - solid stainless steel escutcheon, PHL and Memphis levers. Stainless steel Dallas and Chicago levers. W trim - solid stainless steel lever and esctucheon. Stainless steel ball knob. Two (2) per Cylinder SC1 standard / Also available in keyways of other manufacturers 6 or 7-pin / Compatible with Best, Falcon & Arrow / Large Format IC Core available. Check with factory. 6 or 7-pin Brass Mortise Cylinder Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems FINISHES: 605 (US3), 606 (US4), 612 (US10), 613 (US10B), 625 (US26), 626 (US26D) - F trim / Antimicrobial Coating available on 626 (US26D) & 630 (US32D) for F, J, and W trims. CERTIFICATIONS: WARRANTY: COUNTRY OF ORIGIN: MR SERIES F TRIM U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8') / UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4 0 x 8 0 / Certified to ANSI/BHMA 156.13-2005, Series 1000, / Operational Grade 1 and Security Grade 1 for F and W trim. Operational Grade 1, Security Grade 2 for J trim. Windstorm Resistant product Listed. ANSI A250.13-2003, ASTME1886-02, ASTME330-02, Outswing: 350 ft-lbs., Inswing: N/R, Design Load Rating: 2453 lbf. (Functions with deadbolts only) / Levers meet all applicable accessibility requirements of the Americans with Disabilities Act (ADA) Lifetime Limited Warranty Assembled in the U.S.A. with U.S. and foreign material. Meets the requirements of the Buy American Act. MR SERIES MORTISE LOCKS Note: Heavy Duty Spindle for High Abuse situations is available for F and W trim. See options for pricing. 13

MR SERIES MORTISE LOCKS MR SERIES/MR SERIES IC MORTISE LOCKSET FUNCTIONS NON KEYED FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER Passage MR126 Latchbolt operated by lever from either side F01 Privacy with Thumbturn on Both Sides MR174 Latchbolt operated by lever from either side Thumbturn outside locks/unlocks outside lever Thumbturn inside locks/unlocks outside lever Closing door unlocks outside lever Rotating inside lever unlocks outside lever Privacy MR176 Latchbolt operated by lever from either side Emergency coin turn outside unlocks outside lever Thumbturn inside locks/unlocks outside lever Closing door unlocks outside lever Rotating inside lever unlocks outside lever F22 Privacy with Deadbolt MR178 Latchbolt operated by lever from either side Emergency coin turn outside retracts deadbolt Thumbturn inside extends/retracts deadbolt Not field reversible F02 Privacy with Deadbolt and Egress MR179 Latchbolt operated by lever from either side Emergency coin turn outside retracts deadbolt Thumbturn inside extends/retracts deadbolt Inside lever simultaneously retracts latchbolt and deadbolt F19 MORTISE LOCKSET FUNCTIONS NON KEYED DUMMY FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER Double Dummy MR205 Rigid outside lever Rigid inside lever Double Dummy with Chassis MR206 Rigid outside lever Rigid inside lever Double Dummy with Active Trim MR207 Moveable outside lever Moveable inside lever 14

MR SERIES/MR SERIES IC MORTISE LOCKSET FUNCTIONS NON KEYED DUMMY FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER MR SERIES MORTISE LOCKS Single Dummy MR211 Rigid outside lever Single Dummy with Chassis MR212 Rigid outside lever MORTISE LOCKSET FUNCTIONS DEADLOCKS FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER Single Cylinder Deadbolt MR131 Key outside extends/retracts deadbolt (Available only in sectional trim) F18 Cylinder and Thumbturn Deadbolt MR132 Key outside extends/retracts deadbolt Thumbturn inside extends/retracts deadbolt (Available only in sectional trim) F17 Double Cylinder Deadbolt MR133 Key outside extends/retracts deadbolt Key inside extends/retracts deadbolt (Available only in sectional trim) F16 Classroom Deadbolt MR134 Key outside extends/retracts deadbolt Inside cylinder turn retracts but does not extend deadbolt Not field reversible (Available only in sectional trim) 15

MR SERIES MORTISE LOCKS MR SERIES/MR SERIES IC MORTISE LOCKSET FUNCTIONS KEYED FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER Hold Back Single Cylinder MR113 Latchbolt operated by lever from inside Key outside retracts latchbolt Rigid outside lever Auxiliary latch deadlocks latchbolt Key outside secures latchbolt when latchbolt is retracted by inside lever F06 Hold Back Double Cylinder MR114 Latchbolt operated by lever from inside Key outside retracts latchbolt Rigid outside lever Auxiliary latch deadlocks latchbolt Key inside secures latchbolt when latchbolt is retracted by inside lever Storeroom MR115 Latchbolt operated by lever from inside Key outside retracts latchbolt Rigid outside lever Auxiliary latch deadlocks latchbolt F07 Office MR116 Latchbolt operated by lever from either side Toggle locks/unlocks outside lever Key outside retracts latchbolt Auxiliary latch deadlocks latchbolt F04 Front Door MR117 Latchbolt operated by lever from either side Toggle locks/unlocks outside lever Key outside retracts latchbolt Key outside extends/retracts deadbolt Thumbturn inside extends/retracts deadbolt F08 or F10 Institution with Deadbolt MR128 Key outside retracts latchbolt Key inside retracts latchbolt Key outside extends/retracts deadbolt Key inside extends/retracts deadbolt Rigid outside lever Rigid inside lever Auxiliary latch deadlocks latchbolt Dormitory MR135 Latchbolt operated by lever from either side Key outside extends/retracts deadbolt Thumbturn inside extends/retracts deadbolt F21 Corridor MR136 Latchbolt operated by lever from either side Key outside extends/retracts deadbolt Thumbturn inside extends/retracts deadbolt Inside lever simultaneously retracts latchbolt and deadbolt Auxiliary latch deadlocks latchbolt F13 16

MR SERIES/MR SERIES IC MORTISE LOCKSET FUNCTIONS KEYED FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER MR SERIES MORTISE LOCKS Storeroom / Utility Room MR137 Latchbolt operated by lever from either side Key outside extends/retracts deadbolt Key inside extends/retracts deadbolt Key locks/unlocks outside lever F14 Institution MR138 Key outside retracts latchbolt Key inside retracts latchbolt Rigid outside lever Rigid inside lever Auxiliary latch deadlocks latchbolt F30 Closet / Storeroom MR139 Latchbolt operated by lever from either side Key outside extends/retracts deadbolt Storeroom with Deadbolt MR141 Latchbolt operated by lever from inside Key outside retracts latchbolt Key outside extends/retracts deadbolt Rigid outside lever Inside lever simultaneously retracts latchbolt and deadbolt Auxiliary latch deadlocks latchbolt Thumbturn inside locks/unlocks outside lever Classroom MR148 Latchbolt operated by lever from either side Key outside retracts latchbolt Auxiliary latch deadlocks latchbolt F05 Assisted Living MR149 Latchbolt operated by lever from either side Key outside locks/unlocks outside lever Thumbturn inside locks/unlocks outside lever Closing door unlocks outside lever Rotating inside lever unlocks outside lever Auxiliary latch deadlocks latchbolt Entrance MR154 Latchbolt operated by lever from either side Toggle locks/unlocks outside lever Key outside retracts latchbolt Key outside extends/retracts deadbolt Thumbturn inside extends/retracts deadbolt Inside lever simultaneously retracts latchbolt and deadbolt Auxiliary latch deadlocks latchbolt Projecting then retracting the deadbolt releases the toggle Intruder Deadbolt with Deadlatch MR157 Latchbolt operated by lever from either side Key outside extends/retracts deadbolt Key inside extends/retracts deadbolt Inside lever simultaneously retracts latchbolt and deadbolt Auxiliary latch deadlocks latchbolt F34 17

MR SERIES MORTISE LOCKS MR SERIES/MR SERIES IC MORTISE LOCKSET FUNCTIONS KEYED FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER Dormitory MR158 Latchbolt operated by lever from either side Toggle locks/unlocks outside lever Key outside extends/retracts deadbolt Key inside extends/retracts deadbolt Inside lever simultaneously retracts latchbolt and deadbolt Auxiliary latch deadlocks latchbolt F11 Intruder Deadbolt MR159 Latchbolt operated by lever from either side Key outside extends/retracts deadbolt Key inside extends/retracts deadbolt Inside lever simultaneously retracts latchbolt and deadbolt F33 Dormitory or Exit MR162 Latchbolt operated by lever from either side Toggle locks/unlocks outside lever Key outside retracts latchbolt Key outside extends/retracts deadbolt Thumbturn inside extends/retracts deadbolt Inside lever simultaneously retracts latchbolt and deadbolt Auxiliary latch deadlocks latchbolt F20 Office MR181 Latchbolt operated by lever from either side Key outside locks/unlocks outside lever Thumbturn inside locks/unlocks outside lever Closing door unlocks outside lever Rotating inside lever unlocks outside lever Auxiliary latch deadlocks latchbolt Apartment MR186 Latchbolt operated by lever from either side Key inside locks/unlocks outside lever Key outside retracts latchbolt Auxiliary latch deadlocks latchbolt F09 Electrified Storeroom MR199 Key outside retracts latchbolt Latchbolt operated by lever from inside Auxiliary latch deadlocks latchbolt Auxiliary fail safe latchbolt operated by lever from outside unless electrically locked Auxiliary fail secure latchbolt operated by lever from outside when electrically unlocked Accepts 12VDC@.6A, 12VAC@.6A, 24VDC@.3A and 24VAC@.3A Furnished with 6 wire leads Cylinder and Thumbturn Deadbolt with Dummy Trim MR213 Key outside extends/retracts deadbolt Thumbturn inside extends/retracts deadbolt Rigid outside lever Rotating inside lever retracts deadbolt Double Cylinder Deadbolt with Dummy Trim MR214 Key outside extends/retracts deadbolt Key inside extends/retracts deadbolt Rigid outside lever Rotating inside lever retracts deadbolt Single Cylinder Deadbolt with Dummy Trim MR215 Key outside extends/retracts deadbolt Key inside extends/retracts deadbolt Rigid outside lever Rotating inside lever retracts deadbolt 18

MR SERIES/MR SERIES IC MORTISE LOCKSETS F SERIES (SECTIONAL) MR SERIES MORTISE LOCKS F SERIES PHILADELPHIA (PFSF) TRIM F SERIES BOSTON (BFSF) TRIM F SERIES MIAMI (MFSF) TRIM MORTISE LOCKSETS F SERIES (ESCUTCHEON) F SERIES PHILADELPHIA (PFEF) TRIM F SERIES BOSTON (BFEF) TRIM F SERIES MIAMI (MFEF) TRIM MORTISE LOCKSETS J SERIES (SECTIONAL) J SERIES PHILADELPHIA (PJSJ) TRIM J SERIES CHICAGO (CJSJ) TRIM J SERIES MEMPHIS (TJSJ) TRIM J SERIES DALLAS (DJSJ) TRIM 19

MR SERIES MORTISE LOCKS MR SERIES/MR SERIES IC MORTISE LOCKSETS J SERIES (ESCUTCHEON) J SERIES PHILADELPHIA (PJEJ) TRIM J SERIES CHICAGO (CJEJ) TRIM J SERIES MEMPHIS (TJEJ) TRIM J SERIES DALLAS (DJEJ) TRIM MORTISE LOCKSETS W SERIES (LEVER) W SERIES DALLAS (DWSW) TRIM W SERIES DALLAS (DWEW) TRIM MORTISE LOCKSETS W SERIES (BALL) W SERIES DALLAS (BWSW) TRIM W SERIES DALLAS (BWEW) TRIM 20

MR SERIES/MR SERIES IC MORTISE LOCKSETS F TRIM SECTIONAL PFSF, BFSF, MFSF ESCUTCHEON PFEF, BFEF, MFEF ANSI PDQ 605/606 605/606 NO. NO. FUNCTIONS 626 612/613/625 626 612/613/625 NON-DEADBOLT SINGLE CYLINDER F06 113 Classroom Holdback (Single Cyl) $651.00 $665.00 $682.00 $696.00 F07 115 Store Room $651.00 $665.00 $682.00 $696.00 F04 116 Entrance / Office $651.00 $665.00 $682.00 $696.00 F05 148 Classroom $651.00 $665.00 $682.00 $696.00 149 Assisted Living $651.00 $665.00 $682.00 $696.00 181 Office with Simultaneous Retraction $705.00 $719.00 $736.00 $750.00 DOUBLE CYLINDER F30 138 Asylum $701.00 $715.00 $732.00 $746.00 F09 186 Apartment Entrance $701.00 $715.00 $732.00 $746.00 NON-CYLINDER F01 126 Passage $516.00 $530.00 $547.00 $561.00 174 Privacy with Thumbturn Both Sides $615.00 $629.00 $646.00 $660.00 F22 176 Privacy $581.00 $595.00 $612.00 $626.00 205 Double Dummy $365.00 $379.00 $396.00 $410.00 206 Double Dummy with Chassis $445.00 $459.00 $476.00 $490.00 207 Double Dummy with Active Trim $457.00 $471.00 $488.00 $502.00 211 Single Dummy $200.00 $207.00 $230.00 $244.00 212 Single Dummy with Case $270.00 $277.00 $285.00 $292.00 DEADBOLT SINGLE CYLINDER F08 117 Front Door $667.00 $681.00 $698.00 $712.00 F21 135 Entrance, Storeroom $667.00 $681.00 $698.00 $712.00 F13 136 Dormitory, Entrance $667.00 $681.00 $698.00 $712.00 139 Storeroom Closet $667.00 $681.00 $698.00 $712.00 141 Storeroom Deadbolt $690.00 $704.00 $721.00 $735.00 F10 154 Entrance, Apt. Corridor Single Cyl $667.00 $681.00 $698.00 $712.00 F20 162 Dwelling Entrance, Dormitory $667.00 $681.00 $698.00 $712.00 213 Deadbolt Dummy Cyl/Turn $635.00 $649.00 $666.00 $680.00 215 Deadbolt Dummy Single Cyl $635.00 $649.00 $666.00 $680.00 DOUBLE CYLINDER 128 Institution Deadbolt $701.00 $715.00 $732.00 $746.00 F14 137 Store Door $701.00 $715.00 $732.00 $746.00 F34 157 Classroom Security Double Cyl $701.00 $715.00 $732.00 $746.00 F11 158 Dormitory $701.00 $715.00 $732.00 $746.00 F33 159 Classroom Deadbolt Double Cyl $701.00 $715.00 $732.00 $746.00 214 Deadbolt Dummy Double Cyl $701.00 $715.00 $732.00 $746.00 NON-CYLINDER F02 178 Privacy, Bedroom, Bath $636.00 $650.00 $667.00 $681.00 F19 179 Privacy, Bedroom, Bath $636.00 $650.00 $667.00 $681.00 NO TRIM / *PULL TRIM 114 *Classroom Holdback Double Cyl $701.00 $715.00 - - F18 131 Dead Lock Single Cyl $301.00 $315.00 - - F17 132 Dead Lock Cyl/Turn $331.00 $345.00 - - F16 133 Dead Lock Double Cyl $406.00 $420.00 - - 134 Dead Lock Cyl/Classroom Turn $418.00 $432.00 - - ELECTRIFIED Refer to Electromechanical Hardware Section for Electrified 199 feature. Consult factory for additional functions MR SERIES MORTISE LOCKS 21 Rev 1 1/18/12

MR SERIES MORTISE LOCKS MR SERIES/MR SERIES IC MORTISE LOCKSET OPTIONS F TRIM OPTIONS Handicap Abrasive Strip - Inside only (PFSF, PFEF, BFSF and BFEF only) $39.00 Handicap Abrasive Strip - Outside only (PFSF, PFEF, BFSF and BFEF only) $39.00 Handicap Abrasive Strip - Both Sides (PFSF, PFEF, BFSF and BFEF only) $78.00 Security Head Screws $20.00 Lead-wrapped Case $170.00 Split Finishes Higher Finish Price Sectional Single Sided Mounting Assembly $40.00* HD Spindle $55.00/Side *Charged as an individual line item at parts discount when not included with lock NOTE: See Electromechanical Hardware section for Request to exit feature for 199 function. SECTIONAL F TRIM ADD NOTES: Prices do not include IC Core Prices include IC Housing Prices do not include keying charges for non-ic Other finishes consult Customer Service Handing must be specified Lock discount applies to options Refer to Electromechanical Hardware section for info on 199 electrified option F SERIES PHILADELPHIA (PFSF) TRIM F SERIES BOSTON (BFSF) TRIM F SERIES MIAMI (MFSF) TRIM ESCUTCHEON F TRIM F SERIES PHILADELPHIA (PFEF) TRIM F SERIES BOSTON (BFEF) TRIM F SERIES MIAMI (MFEF) TRIM HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH HANDING STRIKE KEYWAY KEYING 6 MR 116 PFSF 626 RH Curve Lip SCC KD NOTE: Case quantity is 6 / Case weight varies / For split finishes, designate O/S trim first, then I/S 22

MR SERIES/MR SERIES IC MORTISE LOCKSETS J TRIM SECTIONAL PJSJ, CJSJ, TJSJ, DJSJ ESCUTCHEON PJEJ,CJEJ,TJEJ,DJEJ ANSI PDQ NO. NO. FUNCTIONS 630 630 NON-DEADBOLT SINGLE CYLINDER F06 113 Classroom Holdback (Single Cyl) $630.00 $660.00 F07 115 Store Room $630.00 $660.00 F04 116 Entrance / Office $630.00 $660.00 F05 148 Classroom $630.00 $660.00 149 Assisted Living $630.00 $660.00 181 Office with Simultaneous Retraction $660.00 $690.00 DOUBLE CYLINDER F30 138 Asylum $702.00 $732.00 F09 186 Apartment Entrance $702.00 $732.00 NON-CYLINDER F01 126 Passage $515.00 $545.00 174 Privacy with Thumbturn Both Sides $606.00 $636.00 F22 176 Privacy $576.00 $606.00 205 Double Dummy $377.00 $407.00 206 Double Dummy with Chassis $457.00 $487.00 207 Double Dummy with Active Trim $487.00 $517.00 211 Single Dummy $186.00 $201.00 212 Single Dummy with Case $276.00 $291.00 DEADBOLT SINGLE CYLINDER F08 117 Front Door $660.00 $690.00 F21 135 Entrance, Storeroom $660.00 $690.00 F13 136 Dormitory, Entrance $660.00 $690.00 139 Storeroom Closet $660.00 $690.00 141 Storeroom Deadbolt $660.00 $690.00 F10 154 Entrance, Apt. Corridor Single Cyl $660.00 $690.00 F20 162 Dwelling Entrance, Dormitory $660.00 $690.00 213 Deadbolt Dummy Cyl/Turn $620.00 $650.00 215 Deadbolt Dummy Single Cyl $620.00 $650.00 DOUBLE CYLINDER 128 Institution Deadbolt $698.00 $728.00 F14 137 Store Door $698.00 $728.00 F34 157 Classroom Security Double Cyl $698.00 $728.00 F11 158 Dormitory $698.00 $728.00 F33 159 Classroom Deadbolt Double Cyl $698.00 $728.00 214 Deadbolt Dummy Double Cyl $698.00 $728.00 NON-CYLINDER F02 178 Privacy, Bedroom, Bath $651.00 $681.00 F19 179 Privacy, Bedroom, Bath $651.00 $681.00 NO TRIM / *PULL TRIM 114 *Classroom Holdback Double Cyl $698.00 F18 131 Dead Lock Single Cyl $301.00 F17 132 Dead Lock Cyl/Turn $331.00 F16 133 Dead Lock Double Cyl $406.00 134 Dead Lock Cyl/Classroom Turn $418.00 ELECTRIFIED Refer to Electromechanical Hardware Section for Electrified 199 feature. Consult factory for additional functions MR SERIES MORTISE LOCKS 23

MR SERIES MORTISE LOCKS MR SERIES/MR SERIES IC MORTISE LOCKSET OPTIONS J TRIM OPTIONS Handicap Abrasive Strip - Inside only (PJSJ and PJEJ only) $39.00 Handicap Abrasive Strip - Outside only (PJSJ and PJEJ only) $39.00 Handicap Abrasive Strip - Both Sides $78.00 Knurling ((DJSJ, DJEJ, CJSJ, CJEJ only) $45.00 per side Security Head Screws $20.00 Lead-wrapped Case $170.00 Split Finishes Higher Finish Price Sectional Single Sided Mounting Assembly $40.00* *Charged as an individual line item at parts discount when not included with lock NOTE: See Electromechanical Hardware section for Request to exit feature for 199 function. ADD NOTES: Prices do not include IC Core Prices include IC Housing Prices do not include keying charges for non-ic Other finishes consult Customer Service Handing must be specified Lock discount applies to options Refer to Electromechanical Hardware section for info on 199 electrified option SECTIONAL J TRIM ESCUTCHEON J TRIM J SERIES PHILADELPHIA (PJSJ) TRIM J SERIES CHICAGO (CJSJ) TRIM J SERIES PHILADELPHIA (PJEJ) TRIM J SERIES CHICAGO (CJEJ) TRIM J SERIES MEMPHIS (TJSJ) TRIM J SERIES DALLAS (DJSJ) TRIM KNURLING J SERIES MEMPHIS (TJEJ) TRIM J SERIES DALLAS (DJEJ) TRIM HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH HANDING STRIKE KEYWAY KEYING 6 MR 116 PFSF 626 RH Curve Lip SCC KD NOTE: Case quantity is 6 / Case weight varies / For split finishes, designate O/S trim first, then I/S 24

MR SERIES/MR SERIES IC MORTISE LOCKSETS W TRIM SECTIONAL ESCUTCHEON ANSI PDQ NO. NO. FUNCTIONS DWSW (630) BWSW (630) DWEW (630) BWEW (630) MR SERIES MORTISE LOCKS NON-DEADBOLT SINGLE CYLINDER F06 113 *Classroom Holdback Single Cyl $640.00 $670.00 F07 115 Store Room $640.00 $670.00 F04 116 Entrance / Office $640.00 $670.00 F05 148 Classroom $640.00 $670.00 149 Assisted Living Single Cyl $640.00 $670.00 181 Office with Simultaneous Retraction $660.00 $690.00 DOUBLE CYLINDER F30 138 Asylum $702.00 $732.00 F09 186 Apartment Entrance $702.00 $732.00 NON-CYLINDER F01 126 Passage $525.00 $555.00 174 Privacy with Thumbturn Both Sides $616.00 $646.00 F22 176 Privacy $586.00 $616.00 205 Double Dummy $387.00 $417.00 206 Double Dummy with Chassis $467.00 $497.00 207 Double Dummy with Active Trim $498.00 $528.00 211 Single Dummy $196.00 $226.00 212 Single Dummy with Chassis $286.00 $316.00 DEADBOLT SINGLE CYLINDER F08 117 Front Door $670.00 $700.00 F21 135 Entrance, Storeroom $670.00 $700.00 F13 136 Dormitory, Entrance $670.00 $700.00 139 Storeroom Closet $670.00 $700.00 141 Storeroom Deadbolt $670.00 $700.00 F10 154 Entrance, Apt. Corridor Single Cyl $670.00 $700.00 F20 162 Dwelling Entrance, Dormitory $670.00 $700.00 213 Deadbolt Dummy Cyl/Turn $630.00 $660.00 215 Deadbolt Dummy Single Cyl $630.00 $660.00 DOUBLE CYLINDER 128 Institution Deadbolt $708.00 $738.00 F14 137 Store Door $708.00 $738.00 F34 157 Classroom Security Double Cyl $708.00 $738.00 F11 158 Dormitory $708.00 $738.00 F33 159 Classroom Deadbolt Double Cyl $708.00 $738.00 214 Deadbolt Dummy Double Cyl $708.00 $738.00 NON-CYLINDER F02 178 Privacy, Bedroom, Bath $661.00 $691.00 F19 179 Privacy, Bedroom, Bath $661.00 $691.00 NO TRIM / *PULL TRIM 114 *Classroom Holdback Double Cyl - - F18 131 Dead Lock Key/ - - - F17 132 Dead Lock Key/Turn - - F16 133 Dead Lock Key/Key - - 134 Dead Lock Key/Classroom Turn - - ELECTRIFIED Refer to Electromechanical Hardware Section for Electrified 199 feature. Consult factory for additional functions 25

MR SERIES MORTISE LOCKS MR SERIES/MR SERIES IC MORTISE LOCKSET OPTIONS W TRIM OPTIONS ADD Knurling (DWSW and DWEW only) $45.00 per side Security Head Screws $20.00 Lead-wrapped Case $180.00 Split Finishes Higher Finish Price Sectional Single Sided Mounting Assembly $40.00* NOTES: Prices do not include IC Core Prices include IC Housing Prices do not include keying charges for non-ic Other finishes consult Customer Service Handing must be specified Lock discount applies to options Refer to Electromechanical Hardware section for info on 199 electrified option *Charged as an individual line item at parts discount when not included with lock NOTE: See Electromechanical Hardware section for Request to exit feature for 199 function. STAINLESS STEEL SECTIONAL W TRIM KNURLING W SERIES DALLAS (DWSW) TRIM SOLID W SERIES BALL KNOB (BWSW) TRIM STAINLESS STEEL ESCUTCHEON W TRIM W SERIES DALLAS (DWEW) TRIM SOLID W SERIES BALL KNOB (BWEW) TRIM HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH HANDING STRIKE KEYWAY KEYING 6 MR 116 DWSW 630 RH Curve Lip SCC KD NOTE: Case quantity is 6 / Case weight varies / For split finishes, designate O/S trim first, then I/S 26

MR SERIES MORTISE CYLINDERS & KEYING SYSTEMS PDQ COMPATIBLE SUBSTITUTION KEYWAY WITH 1-1/8", 1-1/4" 1-1/2" PRICE ARA Arrow / AR1 $54.00 N/C CO6 / CO59A1 Corbin / 60/59A1 $54.00 N/C CL4 Corbin / L4 $54.00 N/C RUD Russwin $54.00 N/C SCE Schlage / E $54.00 N/C SCC Schlage / SCC $54.00 $78.00 N/C SCC-K Schlage / C-K $54.00 N/C SAL Sargent / LA $54.00 N/C RA-RC Sargent / RA-RC $54.00 N/C YA8 Yale / E1R $54.00 N/C GA Yale / GA $54.00 N/C FAL Falcon / E-R $54.00 N/C TA PDQ / TA (Restricted) $56.00 N/C Dummy - $39.00 - - T-Turn - $41.00 - - NON Less Cylinder - - Deduct $8/Cylinder HIGH SECURITY CYLINDERS AND CORES NOTES: Parts Discount Applies Designate desired finish for Mortise Cylinders ordered separately: 605, 606, 612, 613, 625 or 626 Other finishes consult Customer Service For Mortise Cylinder lengths over 1-1/2" consult Customer Service for availability Dummy mortise cylinder available in 15/16" only T-Turn mortise cylinder available in 15/16" only MR SERIES MORTISE LOCKS SEE PAGE 127 for HIGH SECURITY CYLINDERS AND CORES All High Security Cylinders are in addition to lock price and are calculated at parts discount. Mortise Cylinder KEYING SYSTEMS 0-Bitted with 2 blank keys (For quality control purposes, PDQ "0" bit N/C cylinders are actually keyed to a 1 bit and a 1 bit key is sent to open cylinders.) Keyed Alike / 4 or less Cylinders (KA4) N/C Keyed Alike / 5 or more Cylinders (KA) $6.00 Master Keying with Bitting List (MK) (GMK) $11.80 Construction Keying (CK) (in addition to other keying charges) $11.80 Keyed to existing numbers $8.00 Extra Cut Change, Master, or Control Keys $5.80 Extra Cut Large Bow Keys - SCC / SCE $8.00 Extra Cut Large Bow Keys - SCC / SCE when furnished with lock $8.00 Bitting List for Factory Master Key Production $95.00 LFIC Housing for Large Format add $8.00 VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 NOTE: See Electromechanical Hardware section for Request to exit feature for 199 function. Cylinders supplied with Corbin A01 Cam unless specified. HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH HANDING STRIKE KEYWAY KEYING 6 MR 116 DWSW 630 RH Curve Lip SCC KD 27

MR SERIES MORTISE LOCKS MR SERIES INTERCHANGEABLE CORE CORES PDQ DESCRIPTION NO. WITH LOCK SEPARATE UNCOMBINATED CORES 6 Pin Cores I5206 + KEYWAY (I5206-A) $40.00 $40.00 7 Pin Cores I5207 + KEYWAY (I5207-B) $43.00 $43.00 COMBINATED CORES 6 Pin Cores I5206-1 + KEYWAY (I5206-1A) $40.00 $65.00 7 Pin Cores I5207-1 + KEYWAY (I5207-1B) $43.00 $70.00 BEST KEYWAYS AVAILABLE: A, B, C, D, E, F, G, H, J, K, L, M, Q, WA, WB, WC, WD, WG, WH, TB, TD, TE, & R PDQ1, PDQ2, PDQ3 (RESTRICTED) BEST A2, A3 & A4 SYSTEMS AVAILABLE NOTES: IC Cores are available Combinated or Uncombinated Uncombinated cores do not include springs & pins Combinated cores include masterkeying Designate finish for IC Cores ordered separately: 606 or 626 Parts Discount Applies Cores are small format CONSTRUCTION CORES Construction Core 6-pin only $26.00 - Dummy Construction Core Plastic $ 4.50 $ 4.50 Construction cores are invoiced at shipment and credited upon return. Subject to 50% discount. CONVENTIONAL LARGE FORMAT CORE Schlage LFIC C Keyway $52.00 - HIGH SECURITY IC CORES SEE PAGE 127 for SFIC and LARGE FORMAT (SCHLAGE ) HIGH SECURITY IC CORES All High Security Cylinders are in addition to lock price and are calculated at parts discount. IC Core VISUAL KEY CONTROL IC Mortise Housing Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 SMALL FORMAT MORTISE & RIM CYLINDER HOUSINGS - LESS CORES IC Rim Housing PDQ DESCRIPTION NO. IC Mortise Cylinder Housing 6-pin 1-1/4" I5306- $54.00 IC Mortise Cylinder Housing 7-pin 1-3/8" I5307- $54.00 IC Mortise Cylinder Tapered 6-pin 1/2" I53013-067 $54.00 IC Mortise Cylinder Tapered 7-pin 1/2" I53013-077 $54.00 IC Rim Cylinder Housing (for both 6-pin/7-pin cores) I5308- $54.00 28 Rev 1 1/18/12

MR SERIES PARTS STRIKES LIP PDQ LIST SUBSTIT. DESCRIPTION LENGTH NO. PRICE PRICE 1-1/4" x 4-7/8" ANSI Curved Lip (LH/RHR) 1-3/16" W51241-(designate finish) $20.00 N/C 1-1/4" x 4-7/8" ANSI Curved Lip (RH/LHR) 1-3/16" W51242-(designate finish) $20.00 N/C Extended Straight Lip 1-3/8", 1-5/8", 1-7/8" W51002-(designate finish) $24.00 $12.00 Electric Strike for MR Locks 85003 $486.00 without Deadbolt function ADA THUMBTURN NOTES: Parts Discount Applies Designate desired finish for Strikes & Miscellaneous parts if ordered separately: 605, 606, 612, 613, 625 or 626 MR SERIES MORTISE LOCKS DESCRIPTION PDQ NO. PRICE (ADD TO LOCK) Disability turn (ADA) option W51278-XX $14.00 MISCELLANEOUS PARTS PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE Cam (Corbin A01) For #16 mortise Cylinder 1127-4201 $6.20 - IC Cam for SFIC Mortise Housing 154061 $6.20 - IC Cam for LFIC Mortise housing 154261 $6.20 - Collar Cyl Vandal 3/8" W51214 $13.00 - Collar Spring W51049 $4.20 - Anti-Friction Latchbolt W91904 $32.00 N/C ANTIMICROBIAL COATING NOTES: Parts Discount Applies Lock Discount applies except where noted. Designate desired finish for Strikes & Miscellaneous parts if ordered separately: 605, 606, 612, 613, 625 or 626 ADA Thumbturn DESCRIPTION Mortise Lock Sectional Inside Lever, Rose Bushing and Thumbturn Outside Lever, Rose Bushing and Deadbolt Mortise Lock Escutcheon Inside Lever, Rose Bushing and Thumbturn Outside Lever, Rose Bushing and Deadbolt Maximum discount 50%. Extended lead times apply. Contact factory. $53.00 $55.00 Note: Please place antimicrobial coated orders separately, and allow 30 days for manufacturing. For additional product finishes or styles, please contact PDQ. HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH HANDING STRIKE KEYWAY KEYING 6 MR 116 DW EW 630 RH Curve Lip SCC KD NOTE: Case quantity is 6 / Case weight varies / For split finishes, designate O/S trim first, then I/S 29

J SERIES DECORATIVE TUBULAR LATCH J SERIES TUBUALR LATCHES SPECIFICATIONS J SERIES DECORATIVE TUBULAR LATCHES FOR DOORS: For doors 1-3 8" (35mm) to 1-3 4" (44mm) thick standard BACKSET: 2-3/4" (70mm) backset standard Optional: 2-3/8" (60mm); STRIKE: Full Lip Strike 1-5/8" x 2-1/4" x 3/32" Standard ROSE: Rose Diamater 2 3/8 DOOR PREP: ANSI Standard 161 Door Prep LATCH BOLTS: Latchbolt brass 1 2" (12.7mm) projection Latch faceplate is 1 with 1 1/8 filler provided as standard HAND: Non-handed FINISHES: 630 (stainless Steel) TRIM: Stainless Steel Levers and roses LEVER STYLES AVAILABLE: Philadelphia, Chicago, Memphis and Dallas. WARRANTY: Five (5) year limited warranty 31

J SERIES TUBUALR LATCHES J SERIES J SERIES FUNTIONS FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER NON KEYED Passage Closet J Tube 126 Latchbolt operated by lever from either side or key in outside lever Outside lever always free F75 Privacy Bedroom Bathroom J Tube 176 Latchbolt operated by lever from either side or emergency release in outside lever Outside lever locked by push button on inside Outside lever unlocked by emergency release from outside, rotating inside lever, or closing door F76 Double Dummy J Tube 205 Pull lever both sides No mechanical operation Single Dummy J Tube 211 Pull lever one side No mechanical operation J SERIES HOW TO ORDER SERIES TRIM BACKSET J Series Decorative Tubular Latches PHL Philadelphia CHI Chicago MEM Memphis DAL Dallas 2-3/4 Standard 2-3/8 Optional J Series 176 PHL 630 2-3/4 Full Lip Strike J tube 126 Passage/Closet J tube 176 Privacy/Bedroom/Bathroom J tube 205 Double Dummy J tube 211 Double Dummy 630 Stainless Steel Full Lip Strike 1-5/8" x 2-1/4" x 3/32" FUNCTION FINISH STRIKE 32

J SERIES J SERIES SECTIONAL J TRIM J SERIES TUBUALR LATCHES J SERIES PHILADELPHIA (PJSJ) TRIM J SERIES CHICAGO (CJSJ) TRIM J SERIES MEMPHIS (TJSJ) TRIM J SERIES DALLAS (DJSJ) TRIM J SERIES PRICING ANSI PDQ NO. NO. FUNCTIONS 630 NON-CYLINDER F75 126 Passage $220.00 F76 176 Privacy $240.00 205 Double Dummy $150.00 211 Single Dummy $100.00 33

ASSEMBLED IN U.S.A. GRADE 1 XGT EXTREMELY HEAVY DUTY SERIES LEVER LOCK SPECIFICATIONS FOR DOORS: APPLICATION: BACKSET: 2-3/4" CHASSIS: FRONT: STRIKE: TORQUE RESISTANCE: LATCHBOLT: HAND: TRIM: KEYS: KEYWAYS: XGT SERIES SPIRIT PHILADELPHIA (PHL) LEVER 1-3/4" to 2-1/4" thick / Preset for 1-3/4" door Through door thru-bolting / Fits standard 161 Door prep XGT SERIES SPIRIT BOSTON (BSN) LEVER Heavy duty zinc diecast hubs, investment cast, chromated cold rolled steel, stainless steel and Acuzinc mechanism, billet steel spindles 2-1/4" x 1-1/8" / Beveled 1/8" on 2" / Stainless Steel or Wrought Brass ASA standard / T-Strike or Full Lip Strike optional / Stainless Steel or Wrought Brass Exceeds 3000 in. lbs. 9/16" Throw, Deadlocking Non-handed Solid Zinc diecast PHL, BSN or MIA Levers / Wrought Brass Roses Concealed Screws / 41 Lever Rotation High strength stainless steel investment cast spindle Heavy gauge steel mounting plates Two (2) per Cylinder SCC standard / Also available in keyways of other manufacturers INTERCHANGEABLE CORE: Available for all keyed functions / 6 or 7-pin / Compatible with Best, Falcon and Arrow / Large Format IC Core availablefor PHL Lever ONLY. Check with factory. CYLINDER: KEYING: 6-pin Brass Insert Cylinder keyed to 5-pins Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems FINISHES: 605 (US3), 606 (US4), 612 (US10), 613 (US10B), 625 (US26), 626 (US26D) / Optional Antimicrobial Coating / *Other finishes available via special order CERTIFICATIONS: U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8') / UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4 0 x 8 0 / Certified to ANSI/BHMA A156.2-2003, Series 4000, Grade 1 Windstorm Resistant Product Listed - ANSI A250.13-2003, ASTM E1886-02, ASTM E330-02.Outswing:350 ft-lbs., Inswing: N/R, Design Load Rating: 1485 lbf. Meets all applicable accessibility requirements of the Americans with Disabilities Act (ADA) WARRANTY: Lifetime Limited Warranty XGT SERIES SPIRIT MIAMI (MIA) LEVER Straight Lever No Return XGT SERIES CYLINDRICAL LOCKS COUNTRY OF ORIGIN: Assembled in the U.S.A. with U.S. and foreign material. Meets the requirements of the Buy American Act. 35

XGT SERIES XGT LOCKSET FUNCTIONS XGT SERIES CYLINDRICAL LOCKS FUNCTION FUNCTION NUMBER INSIDE OUTSIDE NON KEYED DESCRIPTION ANSI NUMBER Passage / Closet XGT126 Latchbolt operated by lever from either side at all times F75 Privacy Bedroom / Bathroom XGT176 Latchbolt operated by lever from either side or emergency release in outside lever Outside lever locked by push button on inside Outside lever unlocked by emergency release from outside, rotating inside lever, or closing door F76 Single Dummy XGT211 Pull lever one side No mechanical operation KEYED Storeroom XGT115 Latchbolt operated by inside lever or key in outside lever Outside lever always fixed F86 Entrance XGT116 Latchbolt operated by lever from either side or key in outside lever Outside lever locked by push/turn button on inside When outside lever is locked by push button on inside key from outside, or rotating inside lever unlocks outside lever When outside lever is locked by pushing and turning button on the inside, key from outside or rotating inside lever retracts latch but does not unlock outside lever F109 Security XGT120 Latchbolt operated by lever from either side Key on outside locks inside lever Key on outside unlocks inside lever Outside keyed lever always free Inside lever has non-removable security features Utility Asylum / Institution XGT128 Latchbolt operated by lever from either side Both levers locked by key from either side Both levers unlocked by key from either side F87 Vestibule Class Room Security XGT135 Latchbolt operated by lever from either side Key in either lever locks outside lever Key in either lever unlocks outside lever Inside lever always free F110 General Entry XGT137 Latchbolt operated by lever from either side Both levers locked by key from either side Both levers unlocked by key from either side F91 Communicating XGT141 Latchbolt operated by lever from either side Key in either side locks or unlocks its own lever independently F80 36

XGT SERIES XGT LOCKSET FUNCTIONS FUNCTION Classroom FUNCTION NUMBER XGT148 INSIDE OUTSIDE KEYED Latchbolt operated by lever from either side Outside lever locked by key from outside Outside lever unlocked by key from outside Inside lever always operates latch DESCRIPTION ANSI NUMBER F84 XGT SERIES CYLINDRICAL LOCKS Service Station XGT155 Latchbolt operated by lever from either side or key in outside lever Outside lever locked by push button on inside When outside lever is locked by push button on inside key from outside, rotating inside lever, or closing door unlocks outside lever When outside lever is locked by pushing and turning the slotted button on the inside, key from outside or rotating inside lever retracts latch but does not unlock outside lever F92 Dormitory / Corridor XGT165 Latchbolt operated by lever from either side or key in outside lever Outside lever locked by key on outside or push button on inside Outside lever unlocked by key in outside lever, closing door, or rotating inside lever Inside lever always free F90 Entry XGT182 Latchbolt operated by lever from either side or key in outside lever Outside lever locked by push button on inside Outside lever unlocked by key from outside, or rotating inside lever Kick off feature on latch F82 37

XGT SERIES CYLINDRICAL LOCKS XGT SERIES LOCKSETS ANSI PDQ 605/606/612 NO. NO. FUNCTIONS 626 613/621/625 SINGLE CYLINDER F86 115 Store Room $468.00 $482.00 F81 116 Entrance $468.00 $482.00 120 Security $477.00 $491.00 F84 148 Classroom $468.00 $482.00 F92 155 Service Station $550.00 $564.00 F90 165 Dormitory / Corridor $550.00 $564.00 F82 182 Office / Entry $468.00 $482.00 DOUBLE CYLINDER F87 128 Institution $550.00 $564.00 F88 135 Classroom / Security $550.00 $564.00 F91 137 General Entry $550.00 $564.00 F80 141 Communicating $550.00 $564.00 NON-CYLINDER F76 176 Privacy $391.00 $405.00 F75 126 Passage $339.00 $353.00 211 Single Dummy $157.00 $171.00 TRIM PHILADELPHIA (PHL) LEVER BOSTON (BSN) LEVER MIAMI (MIA) LEVER OPTIONS ADD Handicap Abrasive Coating - Inside only $39.00 Handicap Abrasive Coating - Outside only $39.00 Handicap Abrasive Coating - Both Sides $78.00 Split Finishes Higher Finish Price Lead-Lined Rose $126.00 Dust Box $3.80 NOTES: Prices do not include keying charges For other finishes consult Customer Service Locks will be furnished with ASA Strike & SCC Keyway unless otherwise stated Lock discount applies to Options HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 6 XGT 116 PHL 626 234 ASA SCC KD NOTE: Case quantity is 6 / Case weight is 33 lbs. Keyed Functions / Case weight is 31 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 38 Rev 1 1/18/12

XGT SERIES CYLINDERS & KEYING SYSTEMS PDQ COMPATIBLE LIST SUBSTITUTION KEYWAY WITH PRICE PRICE ARA Arrow / AR1 $46.00 N/C CO6 / CO59A1 Corbin / 60/59A1 $46.00 N/C CL4 Corbin / L4 $46.00 N/C RUD Russwin / D1 $46.00 N/C SCE Schlage / E $46.00 N/C SCC Schlage / SCC $46.00 N/C SCC-K Schlage / C-K $46.00 N/C SAL Sargent / LA $46.00 N/C RA-RC Sargent / RA-RC $46.00 N/C YA8 Yale / E1R $46.00 N/C GA Yale / GA $46.00 N/C FAL Falcon / E-R $46.00 N/C KW Kwikset $46.00 N/C TA PDQ / TA (Restricted) $48.00 $3.00 NON Less Cylinder - Deduct $6/Cylinder NOTES: Parts Discount Applies Designate finish for cylinders ordered separately: 606 or 626 Kwikset cylinder available in 5 pin only Specify KD, KA4, or 1 bitted Specify KD, KA or "0" Bit (PDQ "0" bit is keyed to a 1 bit and a 1 bit key is supplied) Specify tailpiece 6 pin cylinders are key to 5 pins XGT SERIES CYLINDRICAL LOCKS HIGH SECURITY CYLINDERS AND CORES SEE PAGE 127 for HIGH SECURITY CYLINDERS AND CORES All High Security Cylinders are in addition to lock price and are calculated at parts discount. Combination Cylinder KEYING SYSTEMS/CONVENTIONAL CYLINDERS 0-Bitted with 2 blank keys (For quality control purposes, PDQ "0" bit N/C cylinders are actually keyed to a 1 bit and a 1 bit key is sent to open cylinders.) Keyed Alike / 4 or less Cylinders (KA4) N/C Keyed Alike / 5 or more Cylinders (KA) $6.00 Master Keying with Bitting List (MK) (GMK) $11.80 Construction Keying (CK) (in addition to other keying charges) $11.80 Keyed to existing numbers $8.00 Extra Cut Change, Master, or Control Keys $5.80 Extra Cut Large Bow Keys - SCC / SCE $8.00 Extra Cut Large Bow Keys - SCC / SCE when furnished with lock $8.00 Bitting List for Factory Master Key Production $95.00 VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 6 XGT 116 PHL 626 234 ASA SCC KD NOTE: Case quantity is 6 / Case weight is 33 lbs. Keyed Functions / Case weight is 31 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 39

XGT SERIES CYLINDRICAL LOCKS XGT SERIES INTERCHANGEABLE CORE Best SFIC and Schlage Large Format Compatible. LOCKSETS ANSI PDQ 626 605/606/612 NO. NO. FUNCTIONS SFIC LFIC (PHL ONLY) 613/621/625 SINGLE CYLINDER 120 Security $477.00 $482.00 $491.00 F86 115 Store Room $468.00 $473.00 $482.00 F81 116 Entrance $468.00 $473.00 $482.00 F84 148 Classroom $468.00 $473.00 $482.00 F92 155 Service Station $550.00 $555.00 $564.00 165 Dormitory / Corridor $550.00 $555.00 $564.00 F82 182 Office / Entry $468.00 $473.00 $482.00 DOUBLE CYLINDER F87 128 Institution $550.00 $555.00 $564.00 135 Classroom / Security $550.00 $555.00 $564.00 F91 137 Store Door $550.00 $555.00 $564.00 F80 141 Communicating $550.00 $555.00 $564.00 TRIM PHILADELPHIA (PHL IC) LEVER BOSTON (BSN IC) LEVER OPTIONS ADD Handicap Abrasive Strip - Inside only $39.00 Handicap Abrasive Strip - Outside only $39.00 Handicap Abrasive Coating - Both Sides $78.00 Lead-Lined Rose $126.00 Split Finish Higher Finish Price Dust Box $3.80 NOTES: MIAMI (MIA IC) LEVER Prices do not include IC Core Other finishes consult Customer Service Locks will be furnished with ASA Strike unless otherwise stated Lock discount applies to Options HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 6 XGT 116 PHL IC 626 234 ASA PDQ 1 KD NOTE: Case quantity is 6 / Case weight is 33 lbs. Keyed Functions / Case weight is 31 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 40 Rev 1 1/18/12

XGT SERIES INTERCHANGEABLE CORE Best SFIC and Schlage Large Format Compatible. CORES PDQ DESCRIPTION NO. AS PART OF LOCK INDIVIDUALLY UNCOMBINATED CORES 6 Pin Cores I5206 + KEYWAY $40.00 $40.00 7 Pin Cores I5207 + KEYWAY $43.00 $43.00 COMBINATED CORES 6 Pin Cores I5206-1 + KEYWAY $40.00 $65.00 7 Pin Cores I5207-1 + KEYWAY $43.00 $70.00 BEST KEYWAYS AVAILABLE: A, B, C, D, E, F, G, H, J, K, L, M, Q, WA, WB, WC, WD, WG, WH, TB, TD, TE, & R PDQ1, PDQ2, PDQ3 (RESTRICTED) BEST A2, A3 & A4 SYSTEMS AVAILABLE LARGE FORMAT IC CORES: See High Security Cylinders and Keying Section for Core pricing. Large Format fits Schlage Large Format IC. CONSTRUCTION CORES Construction Core 6-pin only $26.00 - Dummy Construction Core Plastic $4.50 $4.50 IC Tailpiece $4.00 Construction cores are invoiced at shipment and credited upon return. Subject to 50% discount. CONVENTIONAL LARGE FORMAT CORE Schlage LFIC C Keyway $52.00 - NOTES: IC Cores are available Combinated or Uncombinated Uncombinated cores do not include springs & pins Combinated cores include masterkeying (SFIC only) Designate finish for IC Cores ordered separately: 606 or 626 Parts Discount Applies Cores are small format Control keys must be ordered seperately IC Core XGT SERIES CYLINDRICAL LOCKS HIGH SECURITY IC CORES SEE PAGE 127 for SFIC and LARGE FORMAT (SCHLAGE ) HIGH SECURITY IC CORES LFIC REQUIRES LARGE FORMAT LEVER All High Security Cylinders are in addition to lock price and are calculated at parts discount. LFIC Core VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 41 Rev 1 1/18/12

XGT SERIES CYLINDRICAL LOCKS XGT SERIES PARTS STRIKES PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE ASA Strike (any finish) V91905-(designate finish) $26.00 N/C 1-1/4" x 4-7/8" T-Strike (any finish) V919050-(designate finish) $11.00 N/C 1-1/8" x 2-3/4" Full Lip Strike (any finish) V919051-(designate finish) $10.00 N/C 1-5/8" x 2-1/4" Box for ANSI Strike $3.80 N/C Electric Strike (U.L. Listed) 85001 $475.00 - LATCHBOLTS PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE NOTES: Parts Discount Applies Designate desired finish for Strikes & Latchbolts if ordered separately: 605, 606, 612, 613, 621, 625 or 626 2-3/4" Deadlocking 2-1/4" x 1-1/8" V91904-711 $58.60 N/C ANTIMICROBIAL COATING Latchbolt DESCRIPTION Lever Set Includes Inside and Outside Lever and Rose (parts discount applies) Maximum discount 50%. Extended lead times apply. Contact factory. $34.00 Note: Please place antimicrobial coated orders separately, and allow 30 days for manufacturing. For additional product finishes or styles, please contact PDQ. HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 6 XGT 116 PHL 626 234 ASA SCC KD 42

ASSEMBLED IN U.S.A. GRADE 1 GT EXTRA HEAVY DUTY SERIES LEVER LOCK SPECIFICATIONS FOR DOORS: APPLICATION: BACKSET: 2-3/4" CHASSIS: FRONT: STRIKE: TORQUE RESISTANCE: LATCHBOLT: HAND: TRIM: KEYS: KEYWAYS: 1-3/4" to 2-1/4" thick / Preset for 1-3/4" door Through door thru-bolting / Fits standard 161 Door prep Heavy duty zinc diecast, investment cast, chromated cold rolled steel, stainless steel and Acuzinc mechanism. Billet Steel spindles for locking functions 2-1/4" x 1-1/8" / Beveled 1/8" on 2" / Stainless Steel or Wrought Brass ASA standard / T-Strike or Full Lip Strike optional / Stainless Steel or Wrought Brass Exceeds 2100 in. lbs. 9/16" Throw Deadlocking Non-handed Solid Zinc diecast PHL, BSN or MIA Levers / Wrought Brass Roses Concealed Screws 41 Lever Rotation Two (2) per Cylinder SCC standard / Also available in keyways of other manufacturers INTERCHANGEABLE CORE: Available for all keyed functions / 6 or 7-pin / Compatible with Best, Falcon and Arrow / Large Format IC Core available for PHL Lever ONLY. Check with factory. CYLINDER: KEYING: 6-pin Brass Insert Cylinder keyed to 5-pins Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems FINISHES: 605 (US3), 606 (US4), 612 (US10), 613 (US10B), 625 (US26), 626 (US26D) / Optional Antimicrobial Coating / *Other finishes available via special order CERTIFICATIONS: U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8') / UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4 0 x 8 0./ / Certified to ANSI/BHMA A156.2-2003, Series 4000, Grade 1 / Windstorm Resistant Product Listed - ANSI A250.13-2003, ASTM E1886-02, ASTM E330-02. / Outswing: 350 ft-lbs., Inswing: N/R, Design Load Rating: 1485 lbf. Meets all applicable accessibility requirements of the Americans with Disabilities Act (ADA) WARRANTY: GT SERIES SPIRIT PHILADELPHIA (PHL) LEVER Twenty-five (25) year Limited Warranty GT SERIES SPIRIT MIAMI (MIA) LEVER Straight Lever No Return GT SERIES SPIRIT BOSTON (BSN) LEVER GT SERIES CYLINDRICAL LOCKS COUNTRY OF ORIGIN: Assembled in the U.S.A. with U.S. and foreign material. Meets the requirements of the Buy American Act. 43

GT SERIES GT LOCKSET FUNCTIONS FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER GT SERIES CYLINDRICAL LOCKS Exit GT124 NON KEYED Latchbolt operated by inside lever at all times Outside lever always fixed Outside lever has non-removable security features F89 Communicating GT125 Latchbolt operated by inside lever Blank plate outside Minimum clearance of 1-1/2" between doors Frame depth 7-1/8" Passage / Closet GT126 Latchbolt operated by lever from either side at all times F75 Hospital Privacy GT175 Latchbolt operated by lever from either side or emergency turn piece in outside lever Outside lever locked by push button on inside Outside lever unlocked by emergency turn piece from outside, rotating inside lever, or closing door Privacy Bedroom / Bathroom GT176 Latchbolt operated by lever from either side or emergency release in outside lever Outside lever locked by push button on inside Outside lever unlocked by emergency release from outside, rotating inside lever, or closing door F76 Patio GT177 Latchbolt operated by lever from either side Outside lever locked by push button on inside Outside lever unlocked by rotating inside lever, or closing door Outside lever has non-removable security features F77 Double Dummy GT205 Pull lever both sides No mechanical operation Single Dummy GT211 Pull lever one side No mechanical operation 44

GT SERIES GT LOCKSET FUNCTIONS FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER Storeroom GT115 KEYED Latchbolt operated by inside lever or key in outside lever Outside lever always fixed F86 GT SERIES CYLINDRICAL LOCKS Entrance GT116 Latchbolt operated by lever from either side or key in outside lever Outside lever locked by push/turn button on inside When outside lever is locked by push button on inside key from outside, or rotating inside lever unlocks outside lever When outside lever is locked by pushing and turning button on the inside, key from outside or rotating inside lever retracts latch but does not unlock outside lever F109 Security GT120 Latchbolt operated by lever from either side Key on outside locks inside lever Key on outside unlocks inside lever Outside keyed lever always free Inside lever has non-removable security features Utility Asylum / Institution GT128 Latchbolt operated by key from either side Both levers always fixed Should not be used on rooms that have no other exit F87 Exit or Twin Communicating GT129 Latchbolt operated by key in inside lever Inside lever always fixed Blank plate outside Minimum clearance of 1-1/2" between doors Frame depth 7-1/8" Vestibule Classroom Security GT135 Latchbolt operated by lever from either side Key in either lever locks outside lever Key in either lever unlocks outside lever Inside lever always free F110 General Entry GT137 Latchbolt operated by lever from either side Both levers locked by key from either side Both levers unlocked by key from either side F91 Communicating GT141 Latchbolt operated by lever from either side Key in either side locks or unlocks its own lever independently F80 45

GT SERIES GT LOCKSET FUNCTIONS FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER GT SERIES CYLINDRICAL LOCKS Classroom GT148 KEYED Latchbolt operated by lever from either side Outside lever locked by key from outside Outside lever unlocked by key from outside Inside lever always operates latch F84 Exit or Twin Communicating GT150 Latchbolt operated by inside lever Blank plate outside Inside lever locked by key inside Inside lever unlocked by key inside Minimum clearance of 1-1/2" between doors Use only in rooms with more than one exit Frame depth 7-1/8" Service Station GT155 Latchbolt operated by lever from either side or key in outside lever Outside lever locked by push button on inside When outside lever is locked by push button on inside key from outside, rotating inside lever, or closing door unlocks outside lever When outside lever is locked by pushing and turning the slotted button on the inside, key from outside or rotating inside lever retracts latch but does not unlock outside lever F92 Dormitory / Corridor GT165 Latchbolt operated by lever from either side or key in outside lever Outside lever locked by key on outside or push button on inside Outside lever unlocked by key in outside lever, closing door, or rotating inside lever Inside lever always free F90 Entry GT182 Latchbolt operated by lever from either side or key in outside lever Outside lever locked by push button on inside Outside lever unlocked by key from outside F82 46

GT SERIES LOCKSETS TRIM ANSI PDQ 605/606/612 NO. NO. FUNCTIONS 626 613/621/625 SINGLE CYLINDER F86 115 Store Room $450.00 $464.00 F81 116 Entrance $450.00 $464.00 120 Security $460.00 $474.00 129 Exit / Twin Communicating $460.00 $474.00 F84 148 Classroom $450.00 $464.00 150 Exit / Twin Communicating $450.00 $464.00 F92 155 Service Station $529.00 $543.00 F90 165 Dormitory / Corridor $529.00 $543.00 F82 182 Office / Entry $450.00 $464.00 DOUBLE CYLINDER F87 128 Institution $529.00 $543.00 F110 135 Classroom / Security $529.00 $543.00 F91 137 General Entry $529.00 $543.00 F80 141 Communicating $529.00 $543.00 NON-CYLINDER F89 124 Exit $330.00 $344.00 125 Communicating $330.00 $344.00 F75 126 Passage $330.00 $344.00 175 Hospital / Privacy $380.00 $394.00 F76 176 Privacy $380.00 $394.00 F77 177 Patio / Privacy $380.00 $394.00 205 Double Dummy $230.00 $244.00 211 Single Dummy $140.00 $147.00 OPTIONS 199 Electrified* - - Refer to Electromechanical Hardware Section Handicap Abrasive Coating - Inside only $39.00 Handicap Abrasive Coating - Outside only $39.00 Handicap Abrasive Coating - Both Sides $78.00 Split Finishes Higher Finish Price Lead-Lined Rose $126.00 Dust Box $3.80 NOTE: See Electromechanical Hardware section for Request to exit feature for 199 function. HOW TO ORDER ADD PHILADELPHIA (PHL) LEVER NOTES: BOSTON (BSN) LEVER MIAMI (MIA) LEVER Prices do not include keying charges Consult Customer Service regarding availability of other finishes Locks will be furnished with ASA Strike & SCC Keyway unless otherwise stated Lock discount applies to Options Refer to Electromechanical Hardware section for info on 199 electrified option GT SERIES CYLINDRICAL LOCKS QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 6 GT 116 PHL 626 234 ASA SCC KD NOTE: Case quantity is 6 / Case weight is 33 lbs. Keyed Functions / Case weight is 31 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 47 Rev 1 1/18/12

GT SERIES CYLINDRICAL LOCKS GT SERIES CYLINDERS & KEYING SYSTEMS PDQ COMPATIBLE LIST SUBSTITUTION KEYWAY WITH PRICE PRICE ARA Arrow / AR1 $46.00 N/C CO6 / CO59A1 Corbin / 60/59A1 $46.00 N/C CL4 Corbin / L4 $46.00 N/C RUD Russwin / D1 $46.00 N/C SCE Schlage / E $46.00 N/C SCC Schlage / SCC $46.00 N/C SCC-K Schlage / C-K $46.00 N/C SAL Sargent / LA $46.00 N/C RA-RC Sargent / RA-RC $46.00 N/C YA8 Yale / E1R $46.00 N/C GA Yale / GA $46.00 N/C FAL Falcon / E-R $46.00 N/C KW Kwikset $46.00 N/C TA PDQ / TA (Restricted) $48.00 $3.00 NON Less Cylinder - Deduct $6/Cylinder NOTES: Parts Discount Applies Designate finish for cylinders ordered separately: 606 or 626 Kwikset cylinder available in 5 pin only Specify KD, KA4, or 1 bitted 6 pin cylinder keyed for 5 pin Specify KD, KA4, or 1 bitted Combination Cylinder HIGH SECURITY CYLINDERS AND CORES SEE PAGE 127 for HIGH SECURITY CYLINDERS AND CORES All High Security Cylinders are in addition to lock price and are calculated at parts discount. KEYING SYSTEMS/CONVENTIONAL CYLINDERS 0-Bitted with 2 blank keys (For quality control purposes, PDQ "0" bit N/C cylinders are actually keyed to a 1 bit and a 1 bit key is sent to open cylinders.) Keyed Alike / 4 or less Cylinders (KA4) N/C Keyed Alike / 5 or more Cylinders (KA) $6.00 Master Keying with Bitting List (MK) (GMK) $11.80 Construction Keying (CK) (in addition to other keying charges) $11.80 Keyed to existing numbers $8.00 Extra Cut Change, Master, or Control Keys $5.80 Extra Cut Large Bow Keys - SCC / SCE $8.00 Extra Cut Large Bow Keys - SCC / SCE when furnished with lock $8.00 Bitting List for Factory Master Key Production $95.00 VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 6 GT 116 PHL 626 234 ASA SCC KD NOTE: Case quantity is 6 / Case weight is 33 lbs. Keyed Functions / Case weight is 31 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 48

GT SERIES INTERCHANGEABLE CORE Best SFIC and Schlage Large Format Compatible. LOCKSETS TRIM ANSI PDQ 626 605/606/612 NO. NO. FUNCTION SFIC LFIC (PHL ONLY) 613/621/625 SINGLE CYLINDER F86 115 Store Room $450.00 $455.00 $464.00 F81 116 Entrance $450.00 $455.00 $464.00 120 Security $460.00 $465.00 $474.00 129 Exit / Twin Communicating $460.00 $465.00 $474.00 F84 148 Classroom $450.00 $455.00 $464.00 150 Exit / Twin Communicating $450.00 $455.00 $464.00 F92 155 Service Station $529.00 $534.00 $543.00 165 Dormitory / Corridor $529.00 $534.00 $543.00 F82 182 Office / Entry $450.00 $455.00 $464.00 DOUBLE CYLINDER F87 128 Institution $529.00 $534.00 $543.00 F110 135 Classroom / Security $529.00 $534.00 $543.00 F91 137 Store Door $529.00 $534.00 $543.00 F80 141 Communicating $529.00 $534.00 $543.00 PHILADELPHIA (PHL IC) LEVER BOSTON (BSN IC) LEVER GT SERIES CYLINDRICAL LOCKS OPTIONS 199 Electrified* Refer to Electromechanical Hardware Section Handicap Abrasive Coating - Inside only $34.00 Handicap Abrasive Coating - Outside only $34.00 Handicap Abrasive Coating - Both Sides $78.00 Lead-Lined Rose $126.00 Split Finish Higher Finish Price Dust Box $3.80 ADD NOTES: MIAMI (MIA IC) LEVER Prices do not include IC Core Other finishes consult Customer Service Locks will be furnished with ASA Strike unless otherwise stated Lock discount applies to Options NOTE: See Electromechanical Hardware section for Request to exit feature for 199 function. HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 6 GT 116 PHL IC 626 234 ASA PDQ 1 KD NOTE: Case quantity is 6 / Case weight is 33 lbs. Keyed Functions / Case weight is 31 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 49 Rev 1 1/18/12

GT SERIES INTERCHANGEABLE CORE Best SFIC and Schlage Large Format Compatible. CORES GT SERIES CYLINDRICAL LOCKS PDQ DESCRIPTION NO. AS PART OF LOCK INDIVIDUALLY UNCOMBINATED CORES 6 Pin Cores I5206 + KEYWAY $40.00 $40.00 7 Pin Cores I5207 + KEYWAY $43.00 $43.00 COMBINATED CORES 6 Pin Cores I5206-1 + KEYWAY $40.00 $65.00 7 Pin Cores I5207-1 + KEYWAY $43.00 $70.00 BEST KEYWAYS AVAILABLE: A, B, C, D, E, F, G, H, J, K, L, M, Q, WA, WB, WC, WD, WG, WH, TB, TD, TE, & R PDQ1, PDQ2, PDQ3 (RESTRICTED) BEST A2, A3 & A4 SYSTEMS AVAILABLE NOTES: IC Cores are available Combinated or Uncombinated Uncombinated cores do not include springs & pins Combinated cores include masterkeying Designate finish for IC Cores ordered separately: 606 or 626 Parts Discount Applies Cores are small format Control keys must be ordered seperately LARGE FORMAT IC CORES: See High Security Cylinders and Keying Section for Core pricing. Large Format fits Schlage Large Format IC. Uncombinated cores are supplied less keys, pins and springs. CONSTRUCTION CORES Construction Core 6-pin only $26.00 - Dummy Construction Core Plastic $4.50 $4.50 IC Tailpiece $4.00 Construction cores are invoiced at shipment and credited upon return. Subject to 50% discount. CONVENTIONAL LARGE FORMAT CORE Schlage LFIC C Keyway $52.00 - HIGH SECURITY IC CORES SEE PAGE 127 for SFIC and LARGE FORMAT (SCHLAGE ) HIGH SECURITY IC CORES LFIC REQUIRES LARGE FORMAT LEVER All High Security Cylinders are in addition to lock price and are calculated at parts discount. IC Core VISUAL KEY CONTROL LFIC Core Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 GT SERIES PARTS STRIKES PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE ASA Strike (any finish) V91905-(designate finish) $26.00 N/C 1-1/4" x 4-7/8" T-Strike (any finish) V919050-(designate finish) $11.00 N/C 1-1/8" x 2-3/4" Full Lip Strike (any finish) V919051-(designate finish) $10.00 N/C 1-5/8" x 2-1/4" Electric Strike (U.L. Listed) 85001 $475.00 - NOTES: Parts Discount Applies Designate desired finish for Strikes & Latchbolts if ordered separately: 605, 606, 612, 613, 625 or 626 50 Rev 1 1/18/12

GT SERIES PARTS LATCHBOLTS PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE 2-3/4" Deadlocking 2-1/4" x 1-1/8" V91904-711 $58.60 N/C (any finish) ANTIMICROBIAL COATING NOTES: Parts Discount Applies Designate desired finish for Strikes & Latchbolts if ordered separately: 605, 606, 612, 613, 625 or 626 GT SERIES CYLINDRICAL LOCKS DESCRIPTION Lever Set Includes Inside and Outside Lever and Rose Maximum discount 50%. Extended lead times apply. Contact factory. $34.00 Note: Please place antimicrobial coated orders separately, and allow 30 days for manufacturing. For additional product finishes or styles, please contact PDQ. Latchbolt SCREW PACKS PDQ LIST DESCRIPTION NO. PRICE Mounting Screw Pack VA10030 $6.00 LEVERS 605/606/612 LEVER STYLE 626 613/621/625 Cylinder $62.00 $68.00 Non Cylinder $60.00 $66.00 Button $62.00 $68.00 Small Format IC $64.00 $70.00 Large Format IC $64.00 $70.00 Inside Rose $36.00 $40.00 Outside Rose $36.00 $40.00 Blank Plate $34.00 $38.00 HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 6 GT 116 PHL 626 234 ASA SCC KD NOTE: Case quantity is 6 / Case weight is 33 lbs. Keyed Functions / Case weight is 31 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 51

GRADE 1 SX COMMERCIAL SERIES CYLINDRICAL LOCK SX SERIES CYLINDRICAL LOCKS SX SERIES (CQ) BALL KNOB SPECIFICATIONS FOR DOORS: DOOR PREP: 1-3/8" to 2" thick. Fits Standard 161 Door Prep. BACKSET: 2-3/4", 2-3/8", 5". CASE: FRONT: STRIKE: TRIM: KEYWAYS: CYLINDER: KEYING: FINISHES: Steel, Yellow Chromate Plate. 2-1/4" x 1-1/8" or 2-1/4" x 1"/ Stainless Steel or Wrought Bronze. 4-7/8" x 1-1/4" (ASA). T or FL Strike Optional. / Stainless Steel or Wrought Bronze. CQ Ball Knob. Stainless Steel or Wrought Bronze. Available in Keyways of Most Major Manufacturers. SFIC Core. (Cylinder not included) Standard Core is Available and can be MK, CMK, GMK, or CK. Available Zero Bitted (KO), Keyed Different (KD), Keyed Alike (KA). Can be keyed into existing masterkey systems of Other Manufacturers. US32D(630). CERTIFICATIONS: UL / ULC for ratings of A label (3 hours) and less, UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4 0 x 8 0 / Meets ANSI/BHMA A156.2 2003 Grade 1, Surpassed 800,000 Cycles. WARRANTY: Five (5) Year Limited Warranty 53

SX SERIES SX LOCKSET FUNCTIONS KEYED FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER NON KEYED Passage SX126 Latchbolt operated by both knobs F75-2 SX SERIES CYLINDRICAL LOCKS Privacy Bathroom Storeroom SX176 SX115 Latchbolt operated by both knobs Push button in inside knob locks outside knob Inside knob or closing door releases button Emergency opening from outside KEYED Latchbolt operated from outside by key, inside by knob Outside knob is rigid at all times Inside knob always free for immediate exit Deadlocking (guarded) latchbolt F76-2 F86-2 Entrance SX116 Latchbolt operated by both knobs Outside knob locked or unlocked by turn/push button Inside knob always free Pushing and turning button locks outside knob requiring use of key until button is manually unlocked Pushing button only locks outside knob until unlocked with key or inside knob is turned F81-2 Classroom Storage SX148 Latchbolt operated from outside by knob except when locked from outside by key Latchbolt operated from inside by knob at all times Deadlocking (guarded) latchbolt F84-2 NOTE: Other functions available by Special Order. LOCKSETS TRIM ANSI PDQ 630 NO. NO. FUNCTIONS REG SFIC SINGLE CYLINDER F86-2 115 Storeroom $292.00 $292.00 F86-2 115 IC Storeroom $292.00 $292.00 F81-2 116 Entrance $292.00 $292.00 F81-2 116 IC Entrance $292.00 $292.00 F84-2 148 Classroom/Storage $292.00 $292.00 F84-2 148 IC Classroom/Storage $292.00 $292.00 F75-2 126 Passage $224.00 - F76-2 176 Privacy $272.00 - OPTIONS Handicap Abrasive Coating - Inside only $40.00 Handicap Abrasive Coating - Outside only $40.00 Handicap Abrasive Coating - Both sides $80.00 Dust Box $3.80 HOW TO ORDER ADD NOTES: (CQ) BALL KNOB Prices do not include keying charges Locks will be furnished with 2-3/4" Latchbolt, ASA Strike & SCC Keyway unless otherwise stated 2-3/4" Latchbolt will be furnished with 2-1/4" x 1-1/8" faceplate unless otherwise stated 2-3/8" Latchbolt will be furnished with 2-1/4" x 1" faceplate unless otherwise stated Lock discount applies to options QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 20 SX 116 CQ 630 234 ASA SCC KD NOTE: Case quantity is 10 / Case weight is 32 lbs. Keyed Functions / Case weight is 40 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 54

SX SERIES CYLINDERS & KEYING SYSTEMS PDQ COMPATIBLE LIST SUBSTITUTION KEYWAY WITH PRICE PRICE ARA Arrow / AR1 $46.00 N/C CO6 / CO59A1 Corbin / 60/59A1 $46.00 N/C CL4 Corbin / L4 $46.00 N/C RUD Russwin / D1 $46.00 N/C SCE Schlage / E $46.00 N/C SCC Schlage / SCC $46.00 N/C SCC-K Schlage / C-K $46.00 N/C SAL Sargent / LA $46.00 N/C RA-RC Sargent / RA-RC $46.00 N/C YA8 Yale / E1R $46.00 N/C GA Yale / GA $46.00 N/C FAL Falcon / E-R $46.00 N/C KW Kwikset $46.00 N/C TA PDQ / TA (Restricted) $48.00 $3.00 NON Less Cylinder - Deduct $6/Cylinder NOTES: Parts Discount Applies Kwikset cylinder available in 5 pin only Combination Cylinder SX SERIES CYLINDRICAL LOCKS HIGH SECURITY CYLINDERS AND CORES SEE PAGE 127 for HIGH SECURITY CYLINDERS AND CORES All High Security Cylinders are in addition to lock price and are calculated at parts discount. KEYING SYSTEMS/CONVENTIONAL CYLINDERS 0-Bitted with 2 blank keys (For quality control purposes, PDQ "0" bit N/C cylinders are actually keyed to a 1 bit and a 1 bit key is sent to open cylinders.) Keyed Alike / 4 or less Cylinders (KA4) N/C Keyed Alike / 5 or more Cylinders (KA) $6.00 Master Keying with Bitting List (MK) (GMK) $11.80 Construction Keying (CK) (in addition to other keying charges) $11.80 Keyed to existing numbers $8.00 Extra Cut Change, Master, or Control Keys $5.80 Extra Cut Large Bow Keys - SCC / SCE $8.00 Extra Cut Large Bow Keys - SCC / SCE when furnished with lock $8.00 Bitting List for Factory Master Key Production $95.00 VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 20 SX 116 CQ 630 234 ASA SCC KD NOTE: Case quantity is 10 / Case weight is 32 lbs. Keyed Functions / Case weight is 40 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 55

SX SERIES SX SERIES CYLINDRICAL LOCKS CORES PDQ DESCRIPTION NO. WITH LOCK SEPARATE UNCOMBINATED CORES 6 Pin Cores I5206 + KEYWAY $40.00 $40.00 7 Pin Cores I5207 + KEYWAY $43.00 $43.00 COMBINATED CORES 6 Pin Cores I5206-1 + KEYWAY $40.00 $65.00 7 Pin Cores I5207-1 + KEYWAY $43.00 $70.00 BEST KEYWAYS AVAILABLE: A, B, C, D, E, F, G, H, J, K, L, M, Q, WA, WB, WC, WD, WG, WH, TB, TD, TE, & R PDQ1, PDQ2, PDQ3 (RESTRICTED) BEST A2, A3 & A4 SYSTEMS AVAILABLE CONSTRUCTION CORES Construction Core 6-pin only $26.00 - Dummy Construction Core Plastic $ 4.50 $ 4.50 IC Tailpiece - $ 4.00 Construction cores are invoiced at shipment and credited upon return. Subject to 50% discount. NOTES: IC Cores are available Combinated or Uncombinated Uncombinated cores do not include springs & pins Combinated cores include masterkeying Designate finish for IC Cores ordered separately: 606 or 626 Parts Discount Applies Cores are small format IC Core HIGH SECURITY IC CORES SEE PAGE 127 for SFIC and LARGE FORMAT (SCHLAGE ) HIGH SECURITY IC CORES NOT AVAILABLE WITH LFIC All High Security Cylinders are in addition to lock price and are calculated at parts discount. VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 20 SX 116 CQ 630 234 ASA SCC KD NOTE: Case quantity is 10 / Case weight is 32 lbs. Keyed Functions / Case weight is 40 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 56 Rev 1 1/18/12

SX SERIES STRIKES PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE ASA Strike (any finish) V91905-(designate finish) $26.00 N/C 1-1/4" x 4-7/8" T-Strike (any finish) V919050-(designate finish) $11.00 N/C 1-1/8" x 2-3/4" Full Lip Strike (any finish) V919051-(designate finish) $10.00 N/C 1-5/8" x 2-1/4" Electric Strike (U.L. Listed) 85001 $475.00 - NOTES: Parts Discount Applies Designate desired finish for Strikes & Latchbolts if ordered separately: 605, 606, 612, 613, 625 or 626 SX SERIES CYLINDRICAL LOCKS LATCHBOLTS LIST SUBSTITUTION DESCRIPTION PRICE PRICE 2-3/4" Deadlocking 2-1/4" x 1-1/8" $58.60 N/C (any finish) ANTIMICROBIAL COATING Latchbolt DESCRIPTION Lever Set Includes Inside and Outside Knob and Rose Maximum discount 50%. Extended lead times apply. Contact factory. $31.50 Note: Please place antimicrobial coated orders separately, and allow 30 days for manufacturing. For additional product finishes or styles, please contact PDQ. SCREW PACKS DESCRIPTION LIST PRICE Mounting Screw Pack $6.00 HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 20 SX 116 CQ 630 234 ASA SCC KD NOTE: Case quantity is 10 / Case weight is 32 lbs. Keyed Functions / Case weight is 40 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 57

ASSEMBLED IN U.S.A. GRADE 2 GP HEAVY DUTY SERIES LEVER LOCK SPECIFICATIONS FOR DOORS: APPLICATION: BACKSET: CHASSIS: FRONT: STRIKE: TORQUE RESISTANCE: LATCHBOLT: HAND: TRIM: KEYS: KEYWAYS: INTERCHANGEABLE CORE: CYLINDER: KEYING: GP SERIES SPIRIT PHILADELPHIA (PHL) LEVER 1-3/8" to 1-3/4" thick / Preset for 1-3/4" door Through door thru-bolting / Fits standard 160 and 161 Door prep 2-3/4" standard / 2-3/8", 5" optional GP SERIES SPIRIT BOSTON (BSN) LEVER Heavy duty zinc diecast, investment cast, cold rolled steel, stainless steel and Acuzinc mechanism 2-1/4" x 1-1/8" or 2-1/4 x 1 / Beveled 1/8" on 2" / Stainless Steel or Wrought Brass ASA standard / T-Strike or Full Lip Strike optional / Stainless Steel or Wrought Brass Exceeds 1600 in. lbs. 1/2" Throw Non-handed Solid Zinc diecast PHL, BSN or MIA Levers / Wrought Brass Roses Concealed Screws / 65 Lever Rotation Two (2) per Cylinder SCC standard / Also available in keyways of other manufacturers Available for all keyed functions / 6 or 7-pin / Compatible with Best, Falcon & Arrow Large Format IC Core available for PHL Lever ONLY. Check with factory. 6-pin Brass Insert Cylinder keyed to 5-pins Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems FINISHES: 605 (US3), 606 (US4), 612 (US10), 613 (US10B), 625 (US26), 626 (US26D) / Optional Antimicrobial Coating / *Other finishes available via special order CERTIFICATIONS: U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8') / UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4 0 x 8 0 /Certified to ANSI/BHMA A156.2-2003, Series 4000, Grade 2 Windstorm Resistant Product Listed - ANSI A250.13-2003, ASTM E1886-02, ASTM E330-02. Outswing: 350 ft-lbs., Inswing: N/R, Design Load Rating: 685 lbf. / Meets all applicable accessibility requirements of the Americans with Disabilities Act (ADA) WARRANTY: COUNTRY OF ORIGIN: Eight (8) Year Limited Warranty GP SERIES SPIRIT MIAMI (MIA) LEVER Straight Lever No Return Assembled in the U.S.A. with U.S. and foreign material. Meets the requirements of the Buy American Act. GP SERIES CYLINDRICAL LOCKS 59

GP SERIES GP LOCKSET FUNCTIONS NON KEYED & KEYED FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER NON KEYED Communicating GP125 Latchbolt operated by inside lever Blank plate outside Minimum clearance of 1-1/2" between doors Frame depth 7-1/8" Deadlocking (guarded) latchbolt GP SERIES CYLINDRICAL LOCKS Passage GP126 Latchbolt operated by lever from either side at all times F75 Privacy Bedroom Bathroom Double Dummy GP176 GP205 Latchbolt operated by lever from either side or emergency release in outside lever Outside lever locked by push button on inside Outside lever unlocked by emergency release from outside, rotating inside lever, or closing door Pull lever both sides No mechanical operation F76 Single Dummy GP211 Pull lever one side No mechanical operation KEYED Storeroom GP115 Latchbolt operated by inside lever or key in outside lever Outside lever always fixed Deadlocking (guarded) latchbolt F86 Entrance GP116 Latchbolt operated by lever from either side or key in outside lever Outside lever locked by push/turn button on inside When outside lever is locked by push button on inside key from outside, or rotating inside lever unlocks outside lever When outside lever is locked by pushing and turning button on the inside, key from outside or rotating inside lever retracts latch but does not unlock outside lever Deadlocking (guarded) latchbolt F109 General Entry GP137 Latchbolt operated by lever from either side Both levers locked by key from either side Both levers unlocked by key from either side Deadlocking (guarded) latchbolt F91 Classroom GP148 Latchbolt operated by lever from either side Outside lever locked by key from outside Outside lever unlocked by key from outside Inside lever always operates latch Deadlocking (guarded) latchbolt F84 Exit or Twin Communicating GP150 Latchbolt operated by inside lever Blank plate outside Inside lever locked by key inside Inside lever unlocked by key inside Minimum clearance of 1-1/2" between doors Use only in rooms with more than one exit Frame depth 7-1/8" Deadlocking (guarded) latchbolt Entry GP182 Latchbolt operated by lever from either side or key in outside lever Outside lever locked by push button on inside Outside lever unlocked by key from outside, or rotating inside lever F82 60

GP SERIES LOCKSETS TRIM ANSI PDQ 605/606/612 NO. NO. FUNCTIONS 626 613/621/625 SINGLE CYLINDER F86 115 Store Room $266.00 $278.00 F81 116 Entrance $266.00 $278.00 F84 148 Classroom $266.00 $278.00 150 Exit / Twin Communicating $266.00 $278.00 F82 182 Office / Entry $266.00 $278.00 DOUBLE CYLINDER F91 137 Store Door $360.00 $372.00 NON-CYLINDER 125 Communicating $198.00 $210.00 F75 126 Passage $188.00 $200.00 F76 176 Privacy $210.00 $222.00 205 Double Dummy $172.00 $184.00 211 Single Dummy $100.00 $106.00 PHILADELPHIA (PHL) LEVER BOSTON (BSN) LEVER GP SERIES CYLINDRICAL LOCKS OPTIONS ADD MIAMI (MIA) LEVER Handicap Abrasive Strip - Inside only $39.00 Handicap Abrasive Strip - Outside only $39.00 Handicap Abrasive Strip - Both sides $78.00 Lead-Lined Rose $126.00 Split Finish Higher Finish Price Dust Box $3.80 NOTES: Prices do not include keying charges Other finishes consult Customer Service Locks will be furnished with 2-3/4" Latchbolt, ASA Strike & SCC Keyway unless otherwise stated 2-3/4" Latchbolt will be furnished with 2-1/4" x 1-1/8" faceplate unless otherwise stated 2-3/8" Latchbolt will be furnished with 2-1/4" x 1" faceplate unless otherwise stated Lock discount applies to Options HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 6 GP 116 PHL 626 234 ASA SCC KD NOTE: Case quantity is 6 / Case weight is 30 lbs. Keyed Functions / Case weight is 29 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 61

GP SERIES CYLINDRICAL LOCKS GP SERIES CYLINDERS & KEYING SYSTEMS PDQ COMPATIBLE LIST SUBSTITUTION KEYWAY WITH PRICE PRICE ARA Arrow / AR1 $46.00 N/C CO6 / CO59A1 Corbin / 60/59A1 $46.00 N/C CL4 Corbin / L4 $46.00 N/C RUD Russwin / D1 $46.00 N/C SCE Schlage / E $46.00 N/C SCC Schlage / SCC $46.00 N/C SCC-K Schlage / C-K $46.00 N/C SAL Sargent / LA $46.00 N/C RA-RC Sargent / RA-RC $46.00 N/C YA8 Yale / E1R $46.00 N/C GA Yale / GA $46.00 N/C FAL Falcon / E-R $46.00 N/C KW Kwikset $46.00 N/C TA PDQ / TA (Restricted) $48.00 $3.00 NON Less Cylinder - Deduct $6/Cylinder HIGH SECURITY CYLINDERS AND CORES SEE PAGE 127 for HIGH SECURITY CYLINDERS AND CORES All High Security Cylinders are in addition to lock price and are calculated at parts discount. NOTES: Parts Discount Applies Designate finish for cylinders ordered separately: 606 or 626 Kwikset cylinder available in 5 pin only Specify KD, KA4, or 1 bitted 6 pin cylinder keyed for 5 pin Specify KD, KA4, or 1 bitted Combination Cylinder KEYING SYSTEMS/CONVENTIONAL CYLINDERS 0-Bitted with 2 blank keys (For quality control purposes, PDQ "0" bit N/C cylinders are actually keyed to a 1 bit and a 1 bit key is sent to open cylinders.) Keyed Alike / 4 or less Cylinders (KA4) N/C Keyed Alike / 5 or more Cylinders (KA) $6.00 Master Keying with Bitting List (MK) (GMK) $11.80 Construction Keying (CK) (in addition to other keying charges) $11.80 Keyed to existing numbers $8.00 Extra Cut Change, Master, or Control Keys $5.80 Extra Cut Large Bow Keys - SCC / SCE $8.00 Extra Cut Large Bow Keys - SCC / SCE when furnished with lock $8.00 Bitting List for Factory Master Key Production $95.00 VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 6 GP 116 PHL 626 234 ASA SCC KD NOTE: Case quantity is 6 / Case weight is 30 lbs. Keyed Functions / Case weight is 29 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 62

GP SERIES INTERCHANGEABLE CORE Best SFIC and Schlage Large Format Compatible. LOCKSETS TRIM ANSI PDQ 626 605/606/612 NO. NO. FUNCTIONS SFIC LFIC (PHL ONLY) 613/621/625 SINGLE CYLINDER F86 115 Store Room $266.00 $271.00 $278.00 F81 116 Entrance $266.00 $271.00 $278.00 F84 148 Classroom $266.00 $271.00 $278.00 150 Exit / Twin Communicating $266.00 $271.00 $278.00 F82 182 Office / Entry $266.00 $271.00 $278.00 DOUBLE CYLINDER F91 137 Store Door $360.00 $365.00 $373.00 OPTIONS Handicap Abrasive Coating - Inside only $39.00 Handicap Abrasive Coating - Outside only $39.00 Handicap Abrasive Coating - Both sides $78.00 Split finishes Higher Finish Price Lead-Lined Rose $126.00 Dust Box $3.80 ADD PHILADELPHIA (PHL IC) LEVER BOSTON (BSN IC) LEVER MIAMI (MIA IC) LEVER GP SERIES CYLINDRICAL LOCKS NOTES: Prices do not include IC Core Other finishes consult Customer Service Locks will be furnished with 2-3/4" Latchbolt & ASA Strike unless otherwise stated 2-3/4" Latchbolt will be furnished with 2-1/4" x 1-1/8" faceplate unless otherwise stated 2-3/8" Latchbolt will be furnished with 2-1/4" x 1" faceplate unless otherwise stated Lock discount applies to Options HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 6 GP 116 PHL IC 626 234 ASA PDQ 1 KD NOTE: Case quantity is 6 / Case weight is 30 lbs. Keyed Functions / Case weight is 29 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 63

GP SERIES INTERCHANGEABLE CORE Best SFIC and Schlage Large Format Compatible. CORES GP SERIES CYLINDRICAL LOCKS PDQ DESCRIPTION NO. AS PART OF LOCK INDIVIDUALLY UNCOMBINATED CORES 6 Pin Cores I5206 + KEYWAY $40.00 $40.00 7 Pin Cores I5207 + KEYWAY $43.00 $43.00 COMBINATED CORES 6 Pin Cores I5206-1 + KEYWAY $40.00 $65.00 7 Pin Cores I5207-1 + KEYWAY $43.00 $70.00 BEST KEYWAYS AVAILABLE: A, B, C, D, E, F, G, H, J, K, L, M, Q, WA, WB, WC, WD, WG, WH, TB, TD, TE, & R PDQ1, PDQ2, PDQ3 (RESTRICTED) BEST A2, A3 & A4 SYSTEMS AVAILABLE NOTES: IC Cores are available Combinated or Uncombinated Uncombinated cores do not include springs & pins Combinated cores include masterkeying Designate finish for IC Cores ordered separately: 606 or 626 Parts Discount Applies Cores are small format Control keys must be ordered seperately LARGE FORMAT IC CORES: See High Security Cylinders and Keying Section for Core pricing. Large Format fits Schlage Large Format IC. Uncombinated cores are supplied less keys, pins and springs. CONSTRUCTION CORES Construction Core 6-pin only $26.00 - Dummy Construction Core Plastic $4.50 $4.50 IC Tailpiece $4.00 Construction cores are invoiced at shipment and credited upon return. Subject to 50% discount. CONVENTIONAL LARGE FORMAT CORE Schlage LFIC C KEyway $52.00 - IC Core HIGH SECURITY IC CORES SEE PAGE 127 for SFIC and LARGE FORMAT (SCHLAGE ) HIGH SECURITY IC CORES LFIC REQUIRES LARGE FORMAT LEVER All High Security Cylinders are in addition to lock price and are calculated at parts discount. LFIC Core VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 64 Rev 1 1/18/12

GP SERIES PARTS STRIKES PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE ASA Strike (any finish) V91900-(designate finish) $26.00 N/C 1-1/4" x 4-7/8" T-Strike (any finish) V91901-(designate finish) $11.00 N/C 1-1/8" x 2-3/4" Full Lip Strike (any finish) V919010-(designate finish) $10.00 N/C 1-5/8" x 2-1/4" Grade 2 Electric Strike (U.L. Listed) 85002 $425.00 - NOTES: Parts Discount Applies Designate desired finish for Strikes & Latchbolts if ordered separately: 605, 606, 612, 613, 621, 625 or 626 LATCHBOLTS PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE GP SERIES CYLINDRICAL LOCKS 2-3/4" SPRINGLATCH 2-1/4" x 1-1/8" V21900-712 $35.00 N/C 2-1/4" x 1" V21900-714 $35.00 N/C 2-3/4" DEADLATCH 2-1/4" x 1-1/8" V21900-711 $38.00 N/C 2-1/4" x 1" V21900-713 $38.00 N/C 2-3/8" SPRINGLATCH 2-1/4" x 1-1/8" V21900-724 $36.00 N/C 2-1/4" x 1" V21900-722 $36.00 N/C 2-1/4" x 1" x 1/4" Radius V21900-722R $36.00 Add $1.00 2-3/8" DEADLATCH 2-1/4" x 1-1/8" V21900-723 $38.00 W/Lock 2-1/4" x 1" V21900-721 $38.00 N/C 2-1/4" x 1" x 1/4" Radius V21900-721R $38.00 N/C 5" Extension for 2 3/4" V21902 $28.00 W/Lock Latchbolts 1 1/8" Latch Front Filler Plate I099-100 $.80 - (Minimum of 100 pieces) ANTIMICROBIAL COATING DESCRIPTION Lever Set Includes Inside and Outside Lever and Rose Maximum discount 50%. Extended lead times apply. Contact factory. $33.00 Note: Please place antimicrobial coated orders separately, and allow 30 days for manufacturing. For additional product finishes or styles, please contact PDQ. HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 6 GP 116 PHL 626 234 ASA SCC KD NOTE: Case quantity is 6 / Case weight is 30 lbs. Keyed Functions / Case weight is 29 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 65

ASSEMBLED IN U.S.A. GRADE2 SA COMMERCIAL SERIES LEVER LOCK SPECIFICATIONS FOR DOORS: APPLICATION: BACKSET: CHASSIS: FRONT: STRIKE: TORQUE RESISTANCE: LATCHBOLT: HAND: TRIM: KEYS: KEYWAYS: INTERCHANGEABLE CORE: CYLINDER: KEYING: 1-3/8" to 1-3/4" thick / Preset for 1-3/4" door SA SERIES SPIRIT PHILADELPHIA (PHL) LEVER Through door thru-bolting / Fits standard 160 and 161 Door prep 2-3/4" standard / 2-3/8", 5" optional Heavy duty zinc diecast, investment cast, cold rolled steel, stainless steel and Acuzinc mechanism 2-1/4" x 1-1/8" or 2-1/4 x 1 / Beveled 1/8" on 2" / Stainless Steel or Wrought Brass ASA standard / T-Strike or Full Lip Strike optional / Stainless Steel or Wrought Brass Exceeds 1600 in. lbs. 1/2" Throw Non-handed Solid Zinc diecast PHL Levers with plastic insert / Wrought Brass Roses / Concealed Screws Two (2) per Cylinder SCC standard / Also available in keyways of other manufacturers Available for all keyed functions / 6 or 7-pin / Compatible with Best, Falcon & Arrow Large Format IC Core available for PHL Lever ONLY. Check with factory. 6-pin Brass Insert Cylinder keyed to 5-pins Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems FINISHES: 605 (US3), 606 (US4), 612 (US10), 613 (US10B), 625 (US26), 626 (US26D) / Optional Antimicrobial Coating / *Other finishes available via special order CERTIFICATIONS: U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8') / UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4 0 x 8 0 / Certified to ANSI/BHMA A156.2-2003, Series 4000, Grade 2 / Meets all applicable accessibility requirements of the Americans with Disabilities Act (ADA) SA SERIES CYLINDRICAL LOCKS WARRANTY: COUNTRY OF ORIGIN: Five (5) Year Limited Warranty Assembled in the U.S.A. with U.S. and foreign material. Meets the requirements of the Buy American Act. 67

SA SERIES SA LOCKSET FUNCTIONS NON KEYED & KEYED FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER NON KEYED Communicating SA125 Latchbolt operated by inside lever Blank plate outside Minimum clearance of 1-1/2" between doors Frame depth 7-1/8" Deadlocking (guarded) latchbolt Passage SA126 Latchbolt operated by lever from either side at all times F75 SA SERIES CYLINDRICAL LOCKS Privacy Bedroom Bathroom Single Dummy SA176 SA211 NON KEYED Latchbolt operated by lever from either side or emergency release in outside lever Outside lever locked by push button on inside Outside lever unlocked by emergency release from outside, rotating inside lever, or closing door Pull lever both sides No mechanical operation KEYED F76 Storeroom SA115 Latchbolt operated by inside lever or key in outside lever Outside lever always fixed Deadlocking (guarded) latchbolt F86 Entrance SA116 Latchbolt operated by lever from either side or key in outside lever Outside lever locked by push/turn button on inside When outside lever is locked by push button on inside key from outside, or rotating inside lever unlocks outside lever When outside lever is locked by pushing and turning button on the inside, key from outside or rotating inside lever retracts latch but does not unlock outside lever Deadlocking (guarded) latchbolt KEYED F109 Classroom SA148 Latchbolt operated by lever from either side Outside lever locked by key from outside Outside lever unlocked by key from outside Inside lever always operates latch Deadlocking (guarded) latchbolt F84 Entry SA182 Latchbolt operated by lever from either side or key in outside lever Outside lever locked by push button on inside Outside lever unlocked by key from outside, or rotating inside lever Kick off feature on latch Deadlocking (guarded) latchbolt F82 68

SA SERIES LOCKSETS TRIM ANSI PDQ NO. NO. FUNCTIONS 626 605/613 SINGLE CYLINDER F86 115 Store Room $206.00 $215.00 F81 116 Entrance $206.00 $215.00 F84 148 Classroom $206.00 $215.00 F82 182 Office / Entry $206.00 $215.00 NON-CYLINDER 125 Communicating $172.00 $181.00 F75 126 Passage $172.00 $181.00 F76 176 Privacy $189.00 $198.00 211 Single Dummy $97.00 $100.00 OPTIONS Handicap Abrasive Coating - Inside only $39.00 Handicap Abrasive Coating - Outside only $39.00 Handicap Abrasive Coating - Both sides $78.00 Split finishes Higher Finish Price Dust Box $3.80 ADD PHILADELPHIA (PHL) LEVER NOTES: Prices do not include keying charges Locks will be furnished with 2-3/4" Latchbolt, ASA Strike & SCC Cylinder unless otherwise stated 2-3/4" Latchbolt will be furnished with 2-1/4" x 1-1/8" faceplate unless otherwise stated 2-3/8" Latchbolt will be furnished with 2-1/4" x 1" faceplate unless otherwise stated SA SERIES CYLINDRICAL LOCKS HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 6 SA 116 PHL 626 234 ASA SCC KD NOTE: Case quantity is 6 / Case weight is 29 lbs. Keyed Functions / Case weight is 28 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 69

SA SERIES CYLINDERS & KEYING SYSTEMS SA SERIES CYLINDRICAL LOCKS PDQ COMPATIBLE LIST SUBSTITUTION KEYWAY WITH PRICE PRICE ARA Arrow / AR1 $46.00 $8.00 CO6 / CO59A1 Corbin / 60/59A1 $46.00 $8.00 CL4 Corbin / L4 $46.00 $8.00 RUD Russwin / D1 $46.00 $8.00 SCE Schlage / E $46.00 $8.00 SCC Schlage / SCC $46.00 $8.00 SCC-K Schlage / C-K $46.00 $8.00 SAL Sargent / LA $46.00 $8.00 RA-RC Sargent / RA-RC $46.00 $8.00 YA8 Yale / E1R $46.00 $8.00 GA Yale / GA $46.00 $8.00 FAL Falcon / E-R $46.00 $8.00 KW Kwikset $48.00 $8.00 NON Less Cylinder - Deduct $6/Cylinder TA PDQ TA Restricted $42.00 $11.00 HIGH SECURITY CYLINDERS AND CORES NOTES: Parts Discount Applies Designate finish for cylinders ordered separately: 606 or 626 Kwikset cylinder available in 5 pin only Specify KD, KA4, or 1 bitted 6 pin cylinder keyed for 5 pin Specify KD, KA4, or 1 bitted Combination Cylinder SEE PAGE 127 for HIGH SECURITY CYLINDERS AND CORES LFIC NOT AVAILABLE All High Security Cylinders are in addition to lock price and are calculated at parts discount. KEYING SYSTEMS/CONVENTIONAL CYLINDERS 0-Bitted with 2 blank keys (For quality control purposes, PDQ "0" bit N/C cylinders are actually keyed to a 1 bit and a 1 bit key is sent to open cylinders.) Keyed Alike / 4 or less Cylinders (KA4) N/C Keyed Alike / 5 or more Cylinders (KA) $6.00 Master Keying with Bitting List (MK) (GMK) $11.80 Construction Keying (CK) (in addition to other keying charges) $11.80 Keyed to existing numbers $8.00 Extra Cut Change, Master, or Control Keys $5.80 Extra Cut Large Bow Keys - SCC / SCE $8.00 Extra Cut Large Bow Keys - SCC / SCE when furnished with lock $8.00 Bitting List for Factory Master Key Production $95.00 VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 6 SA 116 PHL 626 234 ASA SCC KD NOTE: Case quantity is 6 / Case weight is 29 lbs. Keyed Functions / Case weight is 28 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 70

SA SERIES INTERCHANGEABLE CORE LOCKSETS TRIM ANSI PDQ NO. NO. FUNCTIONS 626 605/613 SINGLE CYLINDER F86 115 Store Room $206.00 $215.00 F81 116 Entrance $206.00 $215.00 F84 148 Classroom $206.00 $215.00 F82 182 Office / Entry $206.00 $215.00 OPTIONS Handicap Abrasive Coating - Inside only $39.00 Handicap Abrasive Coating - Outside only $39.00 Handicap Abrasive Coating - Both sides $78.00 Split finishes Higher Finish Price Dust Box $3.80 ADD PHILADELPHIA (PHL IC) LEVER NOTES: Prices do not include IC Core Locks will be furnished with 2-3/4" Latchbolt & ASA Strike unless otherwise stated 2-3/4" Latchbolt will be furnished with 2-1/4" x 1-1/8" faceplate unless otherwise stated 2-3/8 Latchbolt will be furnished with 2-1/4" x 1" faceplate unless otherwise stated SA SERIES CYLINDRICAL LOCKS HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 6 SA 116 PHL IC 626 234 ASA PDQ 1 KD NOTE: Case quantity is 6 / Case weight is 32 lbs. Keyed Functions / Case weight is 31 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 71

SA SERIES INTERCHANGEABLE CORE CORES SA SERIES CYLINDRICAL LOCKS PDQ DESCRIPTION NO. AS PART OF LOCK INDIVIDUALLY UNCOMBINATED CORES 6 Pin Cores I5206 + KEYWAY $40.00 $40.00 7 Pin Cores I5207 + KEYWAY $43.00 $43.00 COMBINATED CORES 6 Pin Cores I5206-1 + KEYWAY $40.00 $65.00 7 Pin Cores I5207-1 + KEYWAY $43.00 $70.00 BEST KEYWAYS AVAILABLE: A, B, C, D, E, F, G, H, J, K, L, M, Q, WA, WB, WC, WD, WG, WH, TB, TD, TE, & R PDQ1, PDQ2, PDQ3 (RESTRICTED) BEST A2, A3 & A4 SYSTEMS AVAILABLE Uncombinated cores are supplied less keys, pins and springs. CONSTRUCTION CORES Construction Core 6-pin only $26.00 - Dummy Construction Core Plastic $4.50 $4.50 IC Tailpiece $4.00 Construction cores are invoiced at shipment and credited upon return. Subject to 50% discount. NOTES: IC Cores are available Combinated or Uncombinated Uncombinated cores do not include springs & pins Combinated cores include masterkeying Designate finish for IC Cores ordered separately: 606 or 626 Parts Discount Applies Cores are small format Control keys must be ordered seperately IC Core HIGH SECURITY IC CORES SEE PAGE 127 for SFIC and LARGE FORMAT (SCHLAGE ) HIGH SECURITY IC CORES NOT AVAILABLE WITH LFIC All High Security Cylinders are in addition to lock price and are calculated at parts discount. VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 72 Rev 1 1/18/12

SA SERIES PARTS STRIKES PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE ASA Strike (any finish) V91900-(designate finish) $26.00 N/C 1-1/4" x 4-7/8" T-Strike (any finish) V91901-(designate finish) $11.00 N/C 1-1/8" x 2-3/4" Full Lip Strike (any finish) V919010-(designate finish) $10.00 N/C 1-5/8" x 2-1/4" Grade 2 Electric Strike (U.L. Listed) 85002 $425.00 - Dust Box $3.80 NOTES: Parts Discount Applies Designate desired finish for Strikes & Latchbolts if ordered separately: 605, 606, 613 or 626 LATCHBOLTS PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE SA SERIES CYLINDRICAL LOCKS 2-3/4" SPRINGLATCH 2-1/4" x 1-1/8" V21900-712 $35.00 N/C 2-1/4" x 1" V21900-714 $35.00 N/C 2-3/4" DEADLATCH 2-1/4" x 1-1/8" V21900-711 $38.00 N/C 2-1/4" x 1" V21900-713 $38.00 N/C 2-3/8" SPRINGLATCH 2-1/4" x 1-1/8" V21900-724 $36.00 N/C 2-1/4" x 1" V21900-722 $36.00 N/C 2-1/4" x 1 x 1/4" Radius V21900-722R $36.00 Add $1.00 2-3/8" DEADLATCH 2-1/4" x 1-1/8" V21900-723 $38.00 N/C 2-1/4" x 1" V21900-721 $38.00 N/C 2-1/4" x 1" x 1/4" Radius V21900-721R $38.00 Add $1.00 Latchbolts 5" Extension for 2 3/4" V21902 $28.00 - HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 6 SA 116 PHL 626 234 ASA SCC KD NOTE: Case quantity is 6 / Case weight is 29 lbs. Keyed Functions / Case weight is 28 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 73

GRADE2 SD COMMERCIAL SERIES LEVER LOCK SPECIFICATIONS FOR DOORS: APPLICATION: BACKSET: CHASSIS: FRONT: STRIKE: LATCHBOLT: HAND: TRIM: KEYS: KEYWAYS: INTERCHANGEABLE CORE: CYLINDER: KEYING: FINISHES: SD SERIES PHILADELPHIA (PHL), BOSTON (BSN). MIAMI (MIA) AND MEMPHIS (MEM) AVAILABLE. 1-3/8" to 1-3/4" thick / Preset for 1-3/4" door Through door thru-bolting / Fits standard 160 and 161 Door prep / Thru-Bolts are removable 2-3/4" standard / 2-3/8" optional Heavy-gauge cold rolled steel mechanism / Dichromated for corrosion resistance 2-1/4" x 1-1/8" or 2-1/4" x 1" / Beveled 1/8" on 2" / Stainless Steel or Wrought Brass ASA standard / T-Strike or Full Lip Strike optional / Stainless Steel or Wrought Brass 1/2" Throw Non-handed (Except Memphis Keyed Functions and Dummies) Solid Zinc diecast PHL, BSN, MIA, MEM Levers / Wrought Brass Roses / Concealed Screws Two (2) per Cylinder SCC standard / Also available in keyways of other manufacturers 6 or 7-pin / Compatible with Best, Falcon & Arrow / Not available with Memphis trim 6-pin Brass Insert Cylinder keyed to 5-pins Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems 605 (US3), 606 (US4), 613 (US10B), 626 (US26D) SD SERIES CYLINDRICAL LOCKS CERTIFICATIONS: U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8') / UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4 0 x 8 0 / Certified to ANSI/BHMA A156.2-2003, Series 4000, Grade 2 / Meets all applicable accessibility requirements of the Americans with Disabilities Act (ADA) WARRANTY: COUNTRY OF ORIGIN: Five (5) year Limited Warranty Manufactured in the Republic of South Korea, a country that has signed a Trade Agreements Act with the U.S.A. and is identified as a Designated Country; thus, qualifying as meeting the Buy American Act. 75

SD SERIES SD LOCKSET FUNCTIONS NON KEYED & KEYED FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER NON KEYED Communicating SD125 Latchbolt operated by inside lever Blank plate outside Minimum clearance of 1-1/2" between doors Deadlocking (guarded) latchbolt Passage SD126 Latchbolt operated by lever from either side at all times F75 Privacy Bedroom Bathroom SD176 Latchbolt operated by lever from either side or emergency release in outside lever Outside lever locked by push button on inside Outside lever unlocked by emergency release from outside, rotating inside lever, or closing door F76 SD SERIES CYLINDRICAL LOCKS Single Dummy Storeroom SD211 SD115 Pull lever both sides No mechanical operation KEYED Latchbolt operated from outside by key, inside by lever Outside lever always fixed Inside lever always free Deadlocking (guarded) latchbolt F86 Entrance SD116 Latchbolt operated by lever from either side or key in outside lever Outside lever locked by push/turn button on inside When outside lever is locked by push button on inside key from outside, or rotating inside lever unlocks outside lever When outside lever is locked by pushing and turning the button on the inside, key from outside or rotating inside lever retracts latch but does not unlock outside lever Deadlocking (guarded) latchbolt F109 Classroom SD148 Latchbolt operated by lever from either side Outside lever locked or unlocked by key from outside Inside lever always operates latch Deadlocking (guarded) latchbolt F84 76

SD SERIES LOCKSETS Memphis available 626 only. Check factory for availability in other finishes. TRIM ANSI PDQ 605 NO. NO. FUNCTIONS 626 606/613 SINGLE CYLINDER F86 115 Store Room $194.00 $200.00 F81 116 Entrance $194.00 $200.00 F84 148 Classroom $194.00 $200.00 PHILADELPHIA (PHL) LEVER NON-CYLINDER 125 Communicating $159.00 $166.00 F75 126 Passage $159.00 $166.00 F76 176 Privacy $173.00 $181.00 211 Single Dummy $86.00 $90.00 NOTE: Handed on Memphis lever BOSTON (BSN) LEVER MIAMI (MIA) LEVER SD SERIES CYLINDRICAL LOCKS MEMPHIS (MEM) LEVER HOW TO ORDER NOTES: Prices do not include keying charges Locks will be furnished with 2-3/4" Latchbolt, ASA Strike & SCC Cylinder unless otherwise stated 2-3/4" Latchbolt will be furnished with 2-1/4" x 1-1/8" faceplate unless otherwise stated 2-3/8" Latchbolt will be furnished with 2-1/4" x 1" faceplate unless otherwise stated QUANTITY SERIES FUNCTION TRIM FINISH HANDING BACKSET STRIKE KEYWAY KEYING 10 SD 116 PHL 626 RH* 234 ASA SCC KD NOTE: Case quantity is 10 / Case weight is 37 lbs. *Memphis keyed and dummy functions only. 77

SD SERIES CYLINDERS & KEYING SYSTEMS SD SERIES CYLINDRICAL LOCKS PDQ COMPATIBLE LIST SUBSTITUTION KEYWAY WITH PRICE PRICE ARA Arrow / AR1 $46.00 $8.00 CO6 / CO59A1 Corbin / 60/59A1 $46.00 $8.00 CL4 Corbin / L4 $46.00 $8.00 RUD Russwin / D1 $46.00 $8.00 SCE Schlage / E $46.00 $8.00 SCC Schlage / SCC $46.00 N/C SCC-K Schlage / C-K $46.00 $8.00 SAL Sargent / LA $46.00 $8.00 RA-RC Sargent / RA-RC $46.00 $8.00 YA8 Yale / E1R $46.00 $8.00 GA Yale / GA $46.00 $8.00 FAL Falcon / E-R $46.00 $8.00 KW Kwikset $46.00 $8.00 TA PDQ / TA (Restricted) $48.00 $11.00 NON Less Cylinder - Deduct $6/Cylinder HIGH SECURITY CYLINDERS AND CORES SEE PAGE 127 for HIGH SECURITY CYLINDERS AND CORES All High Security Cylinders are in addition to lock price and are calculated at parts discount. NOTES: Parts Discount Applies Designate finish for cylinders ordered separately: 606 or 626 Kwikset cylinder available in 5 pin only Specify KD, KA4, or 1 bitted 6 pin cylinder keyed for 5 pin Specify KD, KA4, or 1 bitted Combination Cylinder KEYING SYSTEMS/CONVENTIONAL CYLINDERS 0-Bitted with 2 blank keys (For quality control purposes, PDQ "0" bit N/C cylinders are actually keyed to a 1 bit and a 1 bit key is sent to open cylinders.) Keyed Alike / 4 or less Cylinders (KA4) N/C Keyed Alike / 5 or more Cylinders (KA) $6.00 Master Keying with Bitting List (MK) (GMK) $11.80 Construction Keying (CK) (in addition to other keying charges) $11.80 Keyed to existing numbers $8.00 Extra Cut Change, Master, or Control Keys $5.80 Extra Cut Large Bow Keys - SCC / SCE $8.00 Extra Cut Large Bow Keys - SCC / SCE when furnished with lock $8.00 Bitting List for Factory Master Key Production $95.00 VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH HANDING BACKSET STRIKE KEYWAY KEYING 10 SD 116 PHL 626 RH* 234 ASA SCC KD NOTE: Case quantity is 10 / Case weight is 37 lbs. Keyed Functions / Case weight is 36 lbs. Non-Keyed Functions *Memphis keyed and dummy functions only. 78

SD SERIES INTERCHANGEABLE CORE LOCKSETS TRIM ANSI PDQ NO. NO. FUNCTIONS 626 F86 115 Storeroom $194.00 F81 116 Entrance $194.00 F84 148 Classroom $194.00 PHILADELPHIA (PHL) LEVER NOTE: Memphis trim not available in IC BOSTON (BSN) LEVER MIAMI (MIA) LEVER SD SERIES CYLINDRICAL LOCKS NOTES: Prices do not include IC Core Locks will be furnished with 2-3/4" Latchbolt & ASA Strike unless otherwise stated 2-3/4" Latchbolt will be furnished with 2-1/4" x 1-1/8" faceplate unless otherwise stated 2-3/8 Latchbolt will be furnished with 2-1/4" x 1" faceplate unless otherwise stated IC CORE NOT AVAILABLE WITH MEMPHIS LEVER HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 10 SD 116 PHL IC 626 234 ASA PDQ 1 KD NOTE: Case quantity is 10 / Case weight is 37 lbs. Keyed Functions 79

SD SERIES INTERCHANGEABLE CORE CORES PDQ DESCRIPTION NO. AS PART OF LOCK INDIVIDUALLY UNCOMBINATED CORES 6 Pin Cores I5206 + KEYWAY $40.00 $40.00 7 Pin Cores I5207 + KEYWAY $43.00 $43.00 COMBINATED CORES 6 Pin Cores I5206-1 + KEYWAY $40.00 $65.00 7 Pin Cores I5207-1 + KEYWAY $43.00 $70.00 BEST KEYWAYS AVAILABLE: A, B, C, D, E, F, G, H, J, K, L, M, Q, WA, WB, WC, WD, WG, WH, TB, TD, TE, & R NOTES: IC Cores are available Combinated or Uncombinated Uncombinated cores do not include springs & pins Combinated cores include masterkeying Designate finish for IC Cores ordered separately: 606 or 626 Parts Discount Applies Cores are small format Control keys must be ordered seperately PDQ1, PDQ2, PDQ3 (RESTRICTED) BEST A2, A3 & A4 SYSTEMS AVAILABLE Uncombinated cores are supplied less keys, pins and springs. SD SERIES CYLINDRICAL LOCKS CONSTRUCTION CORES Construction Core 6-pin only $26.00 - Dummy Construction Core Plastic $4.50 $4.00 Construction cores are invoiced at shipment and credited upon return. Subject to 50% discount. IC Tailpiece $4.00 - IC Core HIGH SECURITY IC CORES SEE PAGE 127 for SFIC and LARGE FORMAT (SCHLAGE ) HIGH SECURITY IC CORES NOT AVAILABLE WITH LFIC All High Security Cylinders are in addition to lock price and are calculated at parts discount. VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 80 Rev 1 1/18/12

SD SERIES PARTS STRIKES PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE ASA Strike (any finish) V91900-(designate finish) $26.00 N/C 1-1/4" x 4-7/8" T-Strike (any finish) V91901-(designate finish) $11.00 N/C 1-1/8" x 2-3/4" Full Lip Strike (any finish) V919010-(designate finish) $10.00 N/C 1-5/8" x 2-1/4" Grade 2 Electric Strike (U.L. Listed) 85002 $425.00 - Dust Box $3.80 NOTES: Parts Discount Applies Designate desired finish for Strikes & Latchbolts if ordered separately: 605, 606, 613 or 626 LATCHBOLTS PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE SD SERIES CYLINDRICAL LOCKS 2-3/4" SPRINGLATCH 2-1/4" x 1-1/8" V21900-712 $35.00 N/C 2-1/4" x 1" V21900-714 $35.00 N/C 2-1/4" x 1 x 1/4" Radius V21900-714R $37.00 Add $1.00 2-3/4" DEADLATCH 2-1/4" x 1-1/8" V21900-711 $38.00 N/C 2-1/4" x 1" V21900-713 $38.00 N/C 2 1/4 X 1 X1/4"Radius V21900-713R $40.00 Add $1.00 2-3/8" SPRINGLATCH 2-1/4" x 1-1/8" V21900-724 $36.00 N/C 2-1/4" x 1" V21900-722 $36.00 N/C 2-1/4" x 1 x 1/4" Radius V21900-722R $38.00 Add $1.00 Latchbolts 2-3/8" DEADLATCH 2-1/4" x 1-1/8" V21900-723 $38.00 N/C 2-1/4" x 1" V21900-721 $38.00 N/C 2-1/4" x 1" x 1/4" Radius V21900-721R $40.00 Add $1.00 HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 10 SD 116 PHL 626 234 ASA SCC KD NOTE: Case quantity is 10 / Case weight is 37 lbs. Keyed Functions / Case weight is 36 lbs. Non-Keyed Functions 81

GRADE 2 SV COMMERCIAL SERIES CYLINDRICAL LOCK SV SERIES (CQ) BALL KNOB SPECIFICATIONS FOR DOORS: BACKSET: FRONT: STRIKE: LATCHBOLT: HAND: TRIM: KEYS: KEYWAYS: INTERCHANGEABLE CORE: CYLINDER: KEYING: FINISHES: 1-3/8" to 1-3/4" thick 2-3/4" standard / 2-3/8", 5" optional 2-1/4" x 1-1/8" or 2-1/4" x 1" / Stainless Steel or Wrought Brass ASA standard / T-Strike or Full Lip Strike Optional 1/2" Throw Non-handed Stainless Steel or Wrought Brass Knobs and Roses Two (2) per Cylinder SCC standard / Also available in keyways of other manufacturers Available for all keyed functions / 6 or 7-pin / Compatible with Best, Falcon and Arrow 6-pin Brass Insert Cylinder keyed to 5-pins / SFIC available (contact factory) Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems 605 (US3), 612 (US10), 613 (US10B), 629 (US32), 630 (US32D) SV SERIES CYLINDRICAL LOCKS CERTIFICATIONS: U.L., U.L.C. Listed for A label (3 hour) single swing doors (4' x 8') / UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4 0 x 8 0 / WARRANTY: One (1) year Limited Warranty 83

SV SERIES SV LOCKSET FUNCTIONS NON KEYED & KEYED FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER NON KEYED Closet/ Communicating SV125 Blank plate outside Inner knob always free Deadlocking (guarded) latchbolt Passage SV126 Latchbolt operated by both knobs F75-2 Privacy Bedroom Bathroom SV176 Latchbolt operated by both knobs Push button in inside knob locks outside knob Inside knob or closing door releases button Emergency opening from outside F76-2 Patio SV177 Latchbolt operated by both knobs Push button in inside knob locks outside knob Inside knob or closing door releases button Deadlocking (guarded) latchbolt SV SERIES CYLINDRICAL LOCKS Dummy Storeroom SV211 SV205 SV115 Single or double pull knob(s) One or both side(s) No mechanical operation Surface mounted (SV 211) 2-1/8" bored hole (SV 205) KEYED Latchbolt operated from outside by key, inside by knob Outside knob is rigid at all times Inside knob always free for immediate exit Deadlocking (guarded) latchbolt F86-2 Entrance SV116 Latchbolt operated by both knobs Outside knob locked or unlocked by turn/push button Inside knob always free Pushing and turning button locks outside knob requiring use of key until button is manually unlocked Pushing button only locks outside knob until unlocked with key or inside knob is turned F81-2 General Entrance SV137 Latchbolt operated by both knobs Key on either side locks or unlocks Deadlocking (guarded) latchbolt Classroom Storage SV148 Latchbolt operated from outside by knob except when locked from outside by key Latchbolt operated from inside by knob at all times Deadlocking (guarded) latchbolt F84-2 Exit or Twin Communicating SV150 Blank plate outside Key inside locks or unlocks inside knob No outside operation Deadlocking (guarded) latchbolt Hotel SV161 Outside knob rigid at all times Latchbolt operated from outside by guest key, master key or grand master key, except when shut-out button is used Emergency key operates latchbolt at all times Outside is equipped with indicator pin Inside is always free Deadlocking (guarded) latchbolt 84

SV SERIES LOCKSETS TRIM ANSI PDQ 605 NO. NO. FUNCTIONS 630 613/629 SINGLE CYLINDER F86 115 Storeroom $133.00 $140.00 F81 116 Entrance $133.00 $140.00 F84 148 Classroom $133.00 $140.00 150 Exit / Twin Communicating $133.00 $140.00 161 Hotel $170.00 - DOUBLE CYLINDER F91 137 Store Door $187.00 $194.00 NON-CYLINDER 125 Communicating $102.00 $109.00 F75 126 Passage $102.00 $109.00 F76 176 Privacy $105.00 $112.00 F76 176 Privacy (605/630) - - F77 177 Patio $106.00 $113.00 211 Single Dummy $54.00 $58.00 205 Double Dummy $92.00 $102.00 OPTIONS ADD NOTES: (CQ) BALL KNOB Prices do not include keying charges Locks will be furnished with 2-3/4" Latchbolt, ASA Strike & SCC Keyway unless otherwise stated 2-3/4" Latchbolt will be furnished with 2-1/4" x 1-1/8" faceplate unless otherwise stated 2-3/8" Latchbolt will be furnished with 2-1/4" x 1" faceplate unless otherwise stated Lock discount applies to options SV SERIES CYLINDRICAL LOCKS Handicap Abrasive Coating - Inside & Outside $68.00 Handicap Abrasive Coating - Inside only $34.00 Handicap Abrasive Coating - Outside only $34.00 Dust Box $3.80 NOTE: Split Finishes are special order. Check with factory for lead time. HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 20 SV 116 CQ 630 234 ASA SCC KD NOTE: Case quantity is 20 / Case weight is 43 lbs. Keyed Functions / Case weight is 40 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 85

SV SERIES CYLINDERS & KEYING SYSTEMS PDQ COMPATIBLE LIST SUBSTITUTION KEYWAY WITH PRICE PRICE ARA Arrow / AR1 $46.00 $8.00 CO6 / CO59A1 Corbin / 60/59A1 $46.00 $8.00 CL4 Corbin / L4 $46.00 $8.00 RUD Russwin / D1 $46.00 $8.00 SCE Schlage / E $46.00 $8.00 SCC Schlage / SCC $46.00 N/C SCC-K Schlage / C-K $46.00 $8.00 SAL Sargent / LA $46.00 $8.00 RA-RC Sargent / RA-RC $46.00 $8.00 YA8 Yale / E1R $46.00 $8.00 GA Yale / GA $46.00 $8.00 FAL Falcon / E-R $46.00 $8.00 KW Kwikset $46.00 $8.00 TA PDQ / TA (Restricted) $48.00 $11.00 NON Less Cylinder - Deduct $6/Cylinder NOTES: Parts Discount Applies Designate finish for cylinders ordered separately: 606 or 626 Kwikset cylinder available in 5 pin only Specify KD, KA4, or 1 bitted 6 pin cylinder keyed for 5 pin Specify KD, KA4, or 1 bitted Combination Cylinder SV SERIES CYLINDRICAL LOCKS HIGH SECURITY CYLINDERS AND CORES SEE PAGE 127 for HIGH SECURITY CYLINDERS AND CORES All High Security Cylinders are in addition to lock price and are calculated at parts discount. KEYING SYSTEMS/CONVENTIONAL CYLINDERS 0-Bitted with 2 blank keys (For quality control purposes, PDQ "0" bit N/C cylinders are actually keyed to a 1 bit and a 1 bit key is sent to open cylinders.) Keyed Alike / 4 or less Cylinders (KA4) N/C Keyed Alike / 5 or more Cylinders (KA) $6.00 Master Keying with Bitting List (MK) (GMK) $11.80 Construction Keying (CK) (in addition to other keying charges) $11.80 Keyed to existing numbers $8.00 Extra Cut Change, Master, or Control Keys $5.80 Extra Cut Large Bow Keys - SCC / SCE $8.00 Extra Cut Large Bow Keys - SCC / SCE when furnished with lock $8.00 Bitting List for Factory Master Key Production $95.00 VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 20 SV 116 CQ 630 234 ASA SCC KD NOTE: Case quantity is 20 / Case weight is 43 lbs. Keyed Functions / Case weight is 40 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 86

SV SERIES PARTS CORES PDQ DESCRIPTION NO. WITH LOCK SEPARATE UNCOMBINATED CORES 6 Pin Cores I5206 + KEYWAY $40.00 $40.00 7 Pin Cores I5207 + KEYWAY $43.00 $43.00 COMBINATED CORES 6 Pin Cores I5206-1 + KEYWAY $40.00 $65.00 7 Pin Cores I5207-1 + KEYWAY $43.00 $70.00 NOTES: IC Cores are available Combinated or Uncombinated Uncombinated cores do not include springs & pins Combinated cores include masterkeying Designate finish for IC Cores ordered separately: 606 or 626 Parts Discount Applies Cores are small format BEST KEYWAYS AVAILABLE: A, B, C, D, E, F, G, H, J, K, L, M, Q, WA, WB, WC, WD, WG, WH, TB, TD, TE, & R PDQ1, PDQ2, PDQ3 (RESTRICTED) BEST A2, A3 & A4 SYSTEMS AVAILABLE CONSTRUCTION CORES Construction Core 6-pin only $26.00 - Dummy Construction Core Plastic $ 4.50 $ 4.50 Construction cores are invoiced at shipment and credited upon return. Subject to 50% discount. HIGH SECURITY IC CORES SEE PAGE 127 for SFIC and LARGE FORMAT (SCHLAGE ) HIGH SECURITY IC CORES NOT AVAILABLE WITH LFIC All High Security Cylinders are in addition to lock price and are calculated at parts discount. IC Core SV SERIES CYLINDRICAL LOCKS VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 20 SV 116 CQ 630 234 ASA SCC KD NOTE: Case quantity is 20 / Case weight is 43 lbs. Keyed Functions / Case weight is 40 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 87 Rev 1 1/18/12

SV SERIES STRIKES PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE ASA Strike (any finish) 1-1/4" x 4-7/8" V91900-(designate finish) $26.00 N/C T-Strike (any finish) 1-1/8" x 2-3/4" V91901-(designate finish) $11.00 N/C Full Lip Strike (any finish) 1-5/8" x 2-1/4" V919010-(designate finish) $10.00 N/C Dust Box $3.80 NOTES: Parts Discount Applies Designate desired finish for Strikes & Latchbolts if ordered separately: 605, 612, 613, 629 or 630 Adjustable Latchbolts are not U.L. Listed LATCHBOLTS PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE 2-3/4" SPRINGLATCH 2-1/4" x 1-1/8" V21900-712 $35.00 N/C 2-1/4" x 1" V21900-714 $35.00 N/C 2-1/4" x 1" x 1/4" Radius V21900-714R $37.00 N/C SV SERIES CYLINDRICAL LOCKS 2-3/4" DEADLATCH 2-1/4" x 1-1/8" V21900-711 $38.00 N/C 2-1/4" x 1" V21900-713 $38.00 N/C 2-3/8" SPRINGLATCH 2-1/4" x 1-1/8" V21900-724 $36.00 N/C 2-1/4" x 1" V21900-722 $36.00 N/C 2-1/4" x 1 x 1/4" Radius V21900-722R $38.00 Add $1.00 Latchbolts 2-3/8" DEADLATCH 2-1/4" x 1-1/8" V21900-723 $38.00 N/C 2-1/4" x 1" V21900-721 $38.00 N/C 2-1/4" x 1" x 1/4" Radius V21900-721R $40.00 Add $1.00 5" Extension for 2 3/4" V21902 $28.00 - HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 20 SV 116 CQ 630 234 ASA SCC KD NOTE: Case quantity is 20 / Case weight is 43 lbs. Keyed Functions / Case weight is 40 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 88

GRADE2 SE COMMERCIAL SERIES TUBULAR LOCK SE SERIES PHILADELPHIA (PHL) LEVER SPECIFICATIONS FOR DOORS: BACKSET: 1-3/8" to 1-3/4" thick 2-3/4" - 2-3/8" Adjustable WASHINGTON (WSH) LEVER FRONT: STRIKE: LATCHBOLT: HAND: TRIM: KEYS: KEYWAYS: INTERCHANGEABLE CORE: CYLINDER: KEYING: FINISHES: 2-1/4" x 1" with the 1-1/8 Filler Supplied / Stainless Steel or Wrought Brass ASA standard / T-Strike or Full Lip Strike optional / Stainless Steel or Wrought Brass 1/2" Throw PHL Non-handed / WSH Handed Zinc diecast Levers / Stainless Steel or Wrought Brass Rose Two (2) per Cylinder SCC Standard / Also available in keyways of other manufacturers PHL lever design available for all keyed functions / 6 or 7-pin / Compatible with Best, Falcon & Arrow 6-pin Brass Insert Cylinder keyed to 5-pins Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems 605 (US3), 606 (US4), 626 (US26D), 613 (US10B) - WSH available in 605 (US3) only SE SERIES TUBULAR LOCKS CERTIFICATIONS: U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8') / UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4 0 x 8 0 / All Levers meet all applicable accessibility requirements of the Americans with Disabilities Act (ADA) WARRANTY: One (1) year Limited Warranty 89

SE SERIES SE LOCKSET FUNCTIONS NON KEYED & KEYED FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER NON KEYED Communicating SE125 Latchbolt operated by inside lever Blank plate outside Minimum clearance of 3-1/4" between doors Frame depth 7-1/8" Deadlocking (guarded) latchbolt Passage SE126 Latchbolt operated by lever from either side at all times F75 Privacy Bedroom Bathroom SE176 Latchbolt operated by lever from either side Outside lever locked by turn button on inside Unlocked by emergency release on outside, or rotating inside lever F76 Single Dummy SE211 Pull lever both sides No mechanical operation KEYED Storeroom SE115 Latchbolt operated outside by key, inside by lever Outside lever always fixed Inside lever always free Deadlocking (guarded) latchbolt F86 SE SERIES TUBULAR LOCKS Entrance SE116 Latchbolt operated by both levers Outside lever locked or unlocked by push/turn button Pushing and turning button locks outside lever requiring use of a key until button is manually unlocked Turn button only locks outside lever until unlocked with key or inside lever is turned Deadlocking (guarded) latchbolt F81 Classroom SE148 Latchbolt operated by lever from either side Outside lever locked or unlocked by key from outside Outside lever unlocked by key from outside Inside lever always operates latch Deadlocking (guarded) latchbolt F84 Entry SE182 Latchbolt operated by lever from either side or key in outside lever Outside lever locked by turn button on inside Outside lever unlocked by key from outside, or rotating inside lever Deadlocking (guarded) latchbolt F82 90

SE SERIES PHL TRIM TRIM ANSI PDQ NO. NO. FUNCTIONS 626 605/606/613 SINGLE CYLINDER F86 115 Store Room $176.00 $180.00 F81 116 Entrance $176.00 $180.00 F84 148 Classroom $176.00 $180.00 F82 182 Office/Entry $180.00 $184.00 PHILADELPHIA (PHL) LEVER NON-CYLINDER 125 Communicating $145.00 $150.00 F75 126 Passage $144.00 $149.00 F76 176 Privacy $154.00 $159.00 205 Double Dummy $122.00 $126.00 211 Single Dummy $72.00 $76.00 OPTIONS ADD Handicap Abrasive Coating - Inside only $39.00 Handicap Abrasive Coating - Outside only $39.00 Handicap Abrasive Coating - Both sides $78.00 Dust Box $3.80 WSH TRIM ANSI PDQ NO. NO. FUNCTIONS 605 SINGLE CYLINDER F86 115 Store Room $155.00 F81 116 Entrance $155.00 F84 148 Classroom $155.00 F82 182 Office/Entry $155.00 NON-CYLINDER 125 Communicating $127.00 F75 126 Passage $128.00 F76 176 Privacy $139.00 205 Double Dummy $114.00 211 Single Dummy $67.00 HOW TO ORDER WASHINGTON (WSH) LEVER NOTES: Prices do not include keying charges Locks will be furnished with ASA Strike unless otherwise stated Handing must be specified for WSH Lever WSH Levers available in 605 only SE SERIES TUBULAR LOCKS QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 10 SE 116 PHL 626 ADJ ASA SCC KD NOTE: Case quantity is 10 / Case weight is 32 lbs. Keyed Functions / Case weight is 31 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 91

SE SERIES CYLINDERS & KEYING SYSTEMS PDQ COMPATIBLE LIST SUBSTITUTION KEYWAY WITH PRICE PRICE ARA Arrow / AR1 $46.00 $8.00 CO6 / CO59A1 Corbin / 60/59A1 $46.00 $8.00 CL4 Corbin / L4 $46.00 $8.00 RUD Russwin / D1 $46.00 $8.00 SCE Schlage / E $46.00 $8.00 SCC Schlage / SCC $46.00 N/C SCC-K Schlage / C-K $46.00 $8.00 SAL Sargent / LA $46.00 $8.00 RA-RC Sargent / RA-RC $46.00 $8.00 YA8 Yale / E1R $46.00 $8.00 GA Yale / GA $46.00 $8.00 FAL Falcon / E-R $46.00 $8.00 KW Kwikset $46.00 $8.00 TA PDQ / TA (Restricted) $48.00 $11.00 NON Less Cylinder - Deduct $6/Cylinder NOTES: Parts Discount Applies Designate finish for cylinders ordered separately: 606 or 626 Kwikset cylinder available in 5 pin only Specify KD, KA4, or 1 bitted 6 pin cylinder keyed for 5 pin Specify KD, KA4, or 1 bitted Combination Cylinder HIGH SECURITY CYLINDERS AND CORES SEE PAGE 127 for HIGH SECURITY CYLINDERS AND CORES All High Security Cylinders are in addition to lock price and are calculated at parts discount. KEYING SYSTEMS/CONVENTIONAL CYLINDERS SE SERIES TUBULAR LOCKS 0-Bitted with 2 blank keys (For quality control purposes, PDQ "0" bit N/C cylinders are actually keyed to a 1 bit and a 1 bit key is sent to open cylinders.) Keyed Alike / 4 or less Cylinders (KA4) N/C Keyed Alike / 5 or more Cylinders (KA) $6.00 Master Keying with Bitting List (MK) (GMK) $11.80 Construction Keying (CK) (in addition to other keying charges) $11.80 Keyed to existing numbers $8.00 Extra Cut Change, Master, or Control Keys $5.80 Extra Cut Large Bow Keys - SCC / SCE $8.00 Extra Cut Large Bow Keys - SCC / SCE when furnished with lock $8.00 Bitting List for Factory Master Key Production $95.00 VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 10 SE 116 PHL 626 ADJ ASA SCC KD NOTE: Case quantity is 10 / Case weight is 32 lbs. Keyed Functions / Case weight is 31 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 92

SE SERIES INTERCHANGEABLE CORE LOCKSETS Consult Factory for Availability of Interchangeable Core Functions in 605, 606 and 613Finishes TRIM ANSI PDQ NO. NO. FUNCTIONS 626 SINGLE CYLINDER F86 115 Store Room $176.00 F81 116 Entrance $176.00 F84 148 Classroom $176.00 F82 182 Office / Entry $180.00 OPTIONS Handicap Abrasive Coating - Inside only $39.00 Handicap Abrasive Coating - Outside only $39.00 Handicap Abrasive Coating - Both sides $78.00 Dust Box $3.80 CORES PDQ DESCRIPTION NO. AS PART OF LOCK INDIVIDUALLY ADD PHILADELPHIA (PHL IC) LEVER NOTES: Prices do not include IC Core Locks will be furnished with 2-3/4" Latchbolt & ASA Strike unless otherwise stated 2-3/4" Latchbolt will be furnished with 2-1/4" x 1-1/8" faceplate unless otherwise stated 2-3/8" Latchbolt will be furnished with 2-1/4" x 1" faceplate unless otherwise stated UNCOMBINATED CORES 6 Pin Cores I5206 + KEYWAY $40.00 $40.00 7 Pin Cores I5207 + KEYWAY $43.00 $43.00 COMBINATED CORES 6 Pin Cores I5206-1 + KEYWAY $40.00 $65.00 7 Pin Cores I5207-1 + KEYWAY $43.00 $70.00 BEST KEYWAYS AVAILABLE: A, B, C, D, E, F, G, H, J, K, L, M, Q, WA, WB, WC, WD, WG, WH, TB, TD, TE, & R PDQ1, PDQ2, PDQ3 (RESTRICTED) BEST A2, A3 & A4 SYSTEMS AVAILABLE Uncombinated cores are supplied less keys, pins and springs. CONSTRUCTION CORES Construction Core 6-pin only $26.00 - Dummy Construction Core Plastic $4.50 $4.50 Construction cores are invoiced at shipment and credited upon return. Subject to 50% discount. NOTES: IC Cores are available Combinated or Uncombinated Uncombinated cores do not include springs & pins Combinated cores include masterkeying Designate finish for IC Cores ordered separately: 606 or 626 Parts Discount Applies Cores are small format Control keys must be ordered seperately SE SERIES TUBULAR LOCKS HIGH SECURITY IC CORES SEE PAGE 127 for SFIC and LARGE FORMAT (SCHLAGE ) HIGH SECURITY IC CORES NOT AVAILABLE WITH LFIC All High Security Cylinders are in addition to lock price and are calculated at parts discount. VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 IC Core HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 6 SE 116 PHL IC 626 234 ASA PDQ 1 KD NOTE: Case quantity is 10 / Case weight is 32 lbs. Keyed Functions / Case weight is 31 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 93 Rev 1 1/18/12

SE SERIES PARTS STRIKES PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE ASA Strike (any finish) V91900-(designate finish) $26.00 N/C 1-1/4" x 4-7/8" T-Strike (any finish) V91901-(designate finish) $11.00 N/C 1-1/8" x 2-3/4" Full Lip Strike (any finish) V919010-(designate finish) $10.00 N/C 1-5/8" x 2-1/4" Dust Box $3.80 NOTES: Parts Discount Applies Designate desired finish for Strikes & Latchbolts if ordered separately: 605, 606, 613 or 626 LATCHBOLTS PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE SPRINGLATCH 2-3/4" X 2-3/8" ADJUSTABLE 2-1/4" x 1" I04332 $34.00 N/C DEADLATCH 2-3/4" X 2-3/8" ADJUSTABLE 2-1/4" x 1" I04331 $34.00 N/C Latchbolt SE SERIES TUBULAR LOCKS 1-1/8" Latch Front Filler Plate I099-100 $.75 - (Minimum of 100 pieces) HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 10 SE 116 PHL 626 ADJ SCC KD NOTE: Case quantity is 10 / Case weight is 32 lbs. Keyed Functions / Case weight is 31 lbs. Non-Keyed Functions / For split finishes, designate O/S trim first, then I/S 94

GRADE 2 CL LIGHT COMMERCIAL SERIES INTER-CONNECTED LOCK SPECIFICATIONS FOR DOORS: PREPARATION: 1-3/8" to 1-3/4" thick 4" Center to center dimension CL SERIES PHILADELPHIA (PHL) LEVER BACKSET: CHASSIS: FRONT: STRIKE: LATCHBOLT: DEADBOLT: HAND: TRIM: KEYS: KEYWAYS: INTERCHANGEABLE CORE: CYLINDER: KEYING: FINISHES: CERTIFICATIONS: Latchbolt 2-3/4" standard / 2-3/8" optional Adjustable Deadbolt 2-3/4" standard (UL) / 2-3/4" 2-3/8" Adjustable (not U.L. Listed) Cold-rolled steel mechanism / Dichromated for corrosion resistance 2-1/4" x 1-1/8" or 2-1/4" x 1" / Beveled 1/8" on 2" / Stainless Steel or Wrought Brass T-Strike standard / ASA or Full-Lip optional / Stainless Steel or Wrought Brass 1/2" Throw 1" Throw / Brass Bolt containing one concealed 1/4" case-hardened Steel Roll Pin Non-handed - IC Handed Zinc diecast PHL Levers / Stainless Steel or Wrought Brass Knobs, Escutcheons and Roses Two (2) per cylinder SCC 6-pin or 7-pin / Compatible with Best, Falcon and Arrow 6-pin Brass Insert Cylinder keyed to 5-pins Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems 605 (US3) / PHL - 626 (US26D) / CQ - 630 (US32D) U.L., U.L.C. Listed for A Label (3 hour) single swing doors (4' x 8') PHL meets all applicable accessibility requirements of the Americans with Disabilities Act (ADA) CL SERIES INTER-CONNECTED LOCKS WARRANTY: Two (2) year Limited Warranty 95

CL SERIES LEVER ANSI PDQ NO. NO. FUNCTIONS 626/605 DOUBLE CYLINDER F96 116 Entrance $390.00 F96 116 IC Entrance $434.00 SINGLE CYLINDER F95 126 Entrance $355.00 F95 126 IC Entrance (Handed) $365.00 OPTIONS Handicap Abrasive Coating - Inside only $39.00 Handicap Abrasive Coating - Outside only $39.00 Handicap Abrasive Coating - Both sides $78.00 Dust Box $3.80 ADD PHILADELPHIA (PHL) LEVER NOTES: Prices do not include IC Cores *For CL 126 IC please refer to page 9 for IC Core information Locks will be furnished with 2-3/4" Backset, T-Strike & SCC Keyway unless otherwise stated 2-3/4" Latchbolt will be furnished with 2-1/4" x 1-1/8" faceplate unless otherwise stated 2-3/8" Latchbolt will be furnished with 2-1/4" x 1" faceplate unless otherwise stated CL SERIES INTER-CONNECTED LOCKS HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 10 CL 116 PHL 626 234 T SCC KD NOTE: Case quantity is 10 / Case weight is 52 lbs. Keyed Functions / Case weight is 50 lbs. Non-Keyed Functions 96

CL SERIES CYLINDERS & KEYING SYSTEMS PDQ COMPATIBLE LIST SUBSTITUTION KEYWAY WITH PRICE PRICE SCC Schlage / SCC $46.00 N/C NON Less Cylinder - Deduct $8/Cylinder HIGH SECURITY CYLINDERS AND CORES SEE PAGE 127 for HIGH SECURITY CYLINDERS AND CORES All High Security Cylinders are in addition to lock price and are calculated at parts discount. NOTES: Parts Discount Applies Designate finish for cylinders ordered separately: 606 or 626 Kwikset cylinder available in 5 pin only Specify KD, KA4, or 1 bitted 6 pin cylinder keyed for 5 pin Specify KD, KA4, or 1 bitted KEYING SYSTEMS/CONVENTIONAL CYLINDERS 0-Bitted with 2 blank keys (For quality control purposes, PDQ "0" bit N/C cylinders are actually keyed to a 1 bit and a 1 bit key is sent to open cylinders.) Keyed Alike / 4 or less Cylinders (KA4) N/C Keyed Alike / 5 or more Cylinders (KA) $6.00 Master Keying with Bitting List (MK) (GMK) $11.80 Construction Keying (CK) (in addition to other keying charges) $11.80 Keyed to existing numbers $8.00 Extra Cut Change, Master, or Control Keys $5.80 Extra Cut Large Bow Keys - SCC / SCE $8.00 Extra Cut Large Bow Keys - SCC / SCE when furnished with lock $8.00 Bitting List for Factory Master Key Production $95.00 Combination Cylinder VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 NOTE: Other keyways available, contact factory. $8.00 substitution minimum. BOLTS PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE 2-3/4" BACKSET (U.L.) 2-1/4" x 1-1/8" I04501 $25.00 N/C 2-1/4" x 1-1/8" x 1/4" Radius I04501R $25.00 Add $1.00 2-3/4"- 2-3/8" ADJUSTABLE 2-1/4" x 1" I04507 $25.00 N/C 2-1/4" x 1" x 1/4" Radius I04507R $25.00 Add $1.00 Drive-in I04507-5D $25.00 N/C 1-1/8" Latch Front Filler Plate I099-100 $0.80 - (Minimum of 100 pieces) CL SERIES INTER-CONNECTED LOCKS HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 10 CL 116 PHL 626 234 T SCC KD NOTE: Case quantity is 10 / Case weight is 52 lbs. Keyed Functions / Case weight is 50 lbs. Non-Keyed Functions 97

CL SERIES STRIKES PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE ASA Strike (any finish) V91900-(designate finish) $26.00 N/C 1-1/4" x 4-7/8" T-Strike (any finish) V91901-(designate finish) $11.00 N/C 1-1/8" x 2-3/4" Full Lip Strike (any finish) V919010-(designate finish) $10.00 N/C 1-5/8" x 2-1/4" Deadbolt Strike (any finish) I4702-(designate finish) $10.00 N/C 2-3/4" x 1-1/8" Dust Box $3.80 NOTES: Parts Discount Applies Designate desired Strike & Latchbolt finish if ordered separately: 605 or 626 Adjustable Latchbolts are not U.L. Listed LATCHBOLTS PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE CL SERIES INTER-CONNECTED LOCKS 2-3/4" SPRINGLATCH 2-1/4" x 1-1/8" V21900-712 $35.00 N/C 2-1/4" x 1" V21900-714 $35.00 N/C 2-3/4" DEADLATCH 2-1/4" x 1-1/8" V21900-711 $38.00 N/C 2-1/4" x 1" V21900-713 $38.00 N/C 2-3/8" SPRINGLATCH 2-1/4" x 1-1/8" V21900-724 $36.00 N/C 2-1/4" x 1" V21900-722 $36.00 N/C 2-1/4" x 1" x 1/4" Radius V21900-722R $36.00 Add $1.00 2-3/8" DEADLATCH 2-1/4" x 1-1/8" V21900-723 $38.00 N/C 2-1/4" x 1" V21900-721 $38.00 N/C 2-1/4" x 1" x 1/4" Radius V21900-721R $38.00 Add $1.00 5" Extension for 2 3/4" V21902 $28.00-1 1/8" Latch Front Filler Plate I099-100 $.80 - (Minimum of 100 pieces) Latchbolts HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 10 CL 116 PHL 626 234 T SCC KD NOTE: Case quantity is 10 / Case weight is 52 lbs. Keyed Functions / Case weight is 50 lbs. Non-Keyed Functions 98

GRADE 3 SR ULTRA-LIGHT COMMERCIAL SERIES CYLINDRICAL LOCK SR SERIES (CQ) BALL KNOB SR SERIES (LV) LEVER SPECIFICATIONS FOR DOORS: BACKSET: FRONT: STRIKE: LATCHBOLT: HAND: TRIM: KEYS: KEYWAYS: CYLINDER: KEYING: FINISHES: 1-3/8" to 1-3/4" thick 2-3/4" - 2-3/8" Adjustable 2-1/4" x 1" / Stainless Steel or Wrought Brass Full Lip standard / ASA and T-Strike available 1/2" Throw Non-handed Diecast LV lever / Stainless Steel or Wrought Brass Knobs and Roses Two (2) per Cylinder SCC 5-pin Brass Insert Cylinder Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems 605 (US3) / LV - 626 (US26D) / CQ - 630 (US32D) SR SERIES CYLINDRICAL LOCKS CERTIFICATIONS: Complies with ANSI/BHMA A156.2, Series 4000, Grade 3 LV meets all applicable accessibility requirements of the Americans with Disabilities Act (ADA) WARRANTY: One (1) year Limited Warranty 99

SR SERIES SR LOCKSET FUNCTIONS FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER Entrance SR116CQ 32D Latchbolt operated by both knobs Outside knob locked or unlocked by turn/push button Pushing and turning button locks outside knob requiring use of key until button is manually unlocked Pushing button only locks outside knob until unlocked with key or inside knob is turned Passage SR126CQ 32D Latchbolt operated by both knobs Privacy SR176CQ 32D Latchbolt operated by both knobs Push button on inside locks outside knob Inside knob or closing door releases button Emergency opening from outside Single Dummy SR211CQ 32D Single pull knob one side Surface mount Passage SR126LV 26D Latchbolt operated by both levers Privacy SR176LV 26D Latchbolt operated by outside lever Push button on inside locks lever Inside lever or closing door releases button Emergency opening from outside Single Dummy SR211LV 26D Single pull lever one side Surface mount Entrance SR116CQ/LV 32D/26D Split function for 116: CQ knob outside with key; LV lever with no key inside SR SERIES CYLINDRICAL LOCKS 100

SR SERIES BALL KNOB ANSI BALLPDQ KNOB NO. NO. FUNCTIONS 630/605 TRIM SINGLE CYLINDER F81 116 Entrance $66.00 NON-CYLINDER F75 126 Passage $50.00 F76 176 Privacy $54.00 F76 176 Privacy (605/630) - 211 Single Dummy $35.00 (CQ) BALL KNOB FLAT KNOB ANSI PDQ NO. NO. FUNCTIONS 605 SINGLE CYLINDER F81 116 Entrance $60.00 NON-CYLINDER F75 126 Passage $46.00 F76 176 Privacy $48.00 211 Single Dummy $34.00 (VR) FLAT KNOB LEVER ANSI PDQ NO. NO. FUNCTIONS 626/605 NON-CYLINDER F75 126 Passage $84.00 F76 176 Privacy $89.00 F76 176 Privacy (605/626) - 211 Single Dummy $40.00 BALL KNOB/LEVER ANSI PDQ NO. NO. FUNCTIONS 626/605 SINGLE CYLINDER F81 116 Entrance $90.00 HOW TO ORDER (LV) LEVER NOTES: Prices do not include keying charges Locks will be furnished with FL Strike unless otherwise stated SR SERIES CYLINDRICAL LOCKS QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 20 SR 116 CQ 630 ADJ FL SCC KD NOTE: Case quantity: 20 for CQ Trim, 10 for LV Trim / Case weight varies / For split finishes, designate O/S trim first, then I/S 101

SR SERIES CYLINDERS & KEYING SYSTEMS PDQ COMPATIBLE LIST KEYWAY WITH PRICE SCC Schlage / SCC $46.00 NOTES: Parts Discount Applies Designate finish for cylinders ordered separately: 606 or 626 KEYING SYSTEMS/CONVENTIONAL CYLINDERS 0-Bitted with 2 blank keys (For quality control purposes, PDQ "0" bit N/C cylinders are actually keyed to a 1 bit and a 1 bit key is sent to open cylinders.) Keyed Alike / 4 or less Cylinders (KA4) N/C Keyed Alike / 5 or more Cylinders (KA) $6.00 Master Keying (MK) 2 Levels only $11.80 Construction Keying (CK) $11.80 Keyed to existing numbers $8.00 Extra Cut Change, Master, or Control Keys $5.80 Combination Cylinder HIGH SECURITY CYLINDERS AND CORES SEE PAGE 127 for HIGH SECURITY CYLINDERS AND CORES LFIC NOT AVAILABLE All High Security Cylinders are in addition to lock price and are calculated at parts discount. VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 SR SERIES CYLINDRICAL LOCKS HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 20 SR 116 CQ 630 ADJ FL SCC KD NOTE: Case quantity: 20 for CQ Trim, 10 for LV Trim / Case weight varies / For split finishes, designate O/S trim first, then I/S 102

SR SERIES PARTS STRIKES PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE ASA Strike (any finish) V91900-(designate finish) $26.00 $10.00 1-1/4" x 4-7/8" T-Strike (any finish) V91901-(designate finish) $11.00 N/C 1-1/8" x 2-3/4" Full Lip Strike (any finish) V919010-(designate finish) $10.00 N/C 1-5/8" x 2-1/4" Dust Box $3.80 NOTES: Parts Discount Applies Designate desired Strike & Latchbolt finish if ordered separately: 605 or 630 For U.L. Listed locks see page 46 LATCHBOLTS PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE SPRINGLATCH 2-3/4" - 2-3/8" ADJUSTABLE 2-1/4" x 1" I04407 $28.00 N/C 2-1/4 x 1"Privacy I04407K $28.00 N/C 2-1/4" x 1" x 1/4"Radius I04407R $29.00 Add $1.00 2-1/4" x 1" x 1/4"Radius Privacy I04407KR $29.00 Add $1.00 Drive-in I04407-5D $28.00 N/C Drive-in Privacy I04408-5D $28.00 N/C DEADLATCH 2-3/4" - 2-3/8" ADJUSTABLE 2-1/4" x 1" I04406 $28.00 N/C 2-1/4" x 1" x 1/4" Radius I04406R $29.00 Add $1.00 Drive-in I04406-5D $28.00 N/C Latchbolts 1-1/8" Latch Front Filler Plate I099-100 $0.80 - (Minimum of 100 pieces) SR SERIES CYLINDRICAL LOCKS HOW TO ORDER QUANTITY SERIES FUNCTION TRIM FINISH BACKSET STRIKE KEYWAY KEYING 20 SR 116 CQ 630 ADJ FL SCC KD NOTE: Case quantity: 20 for CQ Trim, 10 for LV Trim / Case weight varies / For split finishes, designate O/S trim first, then I/S 103

ASSEMBLED IN U.S.A. KT EXTRA HEAVY DUTY SERIES DEADBOLT KT SERIES KT SERIES IC SPECIFICATIONS FOR DOORS: BACKSET: FRONT: STRIKE: DEADBOLT: HAND: TRIM: 1-3/8" to 1-3/4" thick 2-3/4" standard / 2-3/8" available 2-1/4" x 1-1/8" or 2-1/4" x 1" / Stainless Steel or Wrought Brass 2-3/4" x 1-1/8" / Stainless Steel or Wrought Brass 1" Throw / Brass Bolt containing two concealed 1/4" case-hardened Steel Roll Pins Non-handed Wrought Brass Scalp / Reinforced Zinc Diecast Rose KEYS: KEYWAYS: INTERCHANGEABLE CORE: CYLINDER: Two (2) per Cylinder SCC standard / Also available in keyways of other manufacturers 6 or 7-pin / Compatible with Best, Falcon and Arrow 6-pin Brass Mortise Cylinder keyed to 5-pins KT SERIES DEADBOLT LOCKS KEYING: FINISHES: WARRANTY: COUNTRY OF ORIGIN: Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems 605 (US3), 606 (US4), 613 (US10B), 625 (US26) or 626 (US26D) One (1) year Limited Warranty Assembled in the U.S.A. with U.S. and foreign material. Meets the requirements of the Buy American Act. 105

KT SERIES KT DEADBOLT FUNCTIONS FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER Single Cylinder KT116 PDQ Lock or unlock by key from outside, by thumb turn from inside Entrance KT121 KT only Lock or unlock by key from outside Blank mortise cylinder on inside Single Sided KT125 Deadbolt by inside thumb turn only Blank mortise cylinder on outside Double Cylinder KT137 PDQ Lock PDQ or unlock by key from both sides Classroom KT148 KT only Lock or unlock by key from outside Turnpiece inside retracts deadbolt, but will not project it DEADBOLTS KT SERIES DEADBOLT LOCKS ANSI PDQ 605/606 NO. NO. FUNCTIONS 626 613/625 SINGLE CYLINDER E1151 116 Entrance $161.00 $171.00 E0151 116 IC Entrance $188.00 $198.00 E0161 121 Entrance $161.00 $171.00 E0161 121 IC Entrance $188.00 $198.00 E1171 148 Classroom $195.00 $205.00 E0171 148 IC Classroom $220.00 $230.00 DOUBLE CYLINDER E1141 137 Store Door $186.00 $196.00 E0141 137 IC Store Door (6 Pin only) $226.00 $236.00 NOTES: Prices do not include IC Core Consult Customer Service for availability of Split Finish IC available for 1-3/4" thick Door only 2-3/4" Latchbolt will be furnished with 2-1/4" x 1-1/8" faceplate unless otherwise stated 2-3/8" Latchbolt will be furnished with 2-1/4" x 1" faceplate unless otherwise stated ADA thumbturn available special order NON-CYLINDER 125 Communicating $197.00 $207.00 NOTE: LFIC only available in 116. Add $8.00 substitition. 106

KT SERIES KEYING MORTISE CYLINDERS PDQ COMPATIBLE SUBSTITUTION KEYWAY WITH 1-1/8" PRICE ARA Arrow / AR1 $54.00 N/C CO6 / CO59A1 Corbin / 60/59A1 $54.00 N/C CL4 Corbin / L4 $54.00 N/C RUD Russwin / D1 $54.00 N/C SCE Schlage / E $54.00 N/C SCC Schlage / SCC $54.00 N/C SCC-K Schlage / C-K $54.00 N/C SAL Sargent / LA $54.00 N/C RA-RC Sargent / RA-RC $54.00 N/C YA8 Yale / E1R $54.00 N/C GA Yale / GA $54.00 N/C FAL Falcon / E-R $54.00 N/C TA PDQ / TA (Restricted) $57.00 $3.00 NON Less Cylinder - Deduct $8/Cylinder NOTES: Parts Discount Applies Designate desired finish for Mortise Cylinders if ordered separately: 605, 606, 612, 613, 625 or 626 Mortise Cylinder KEYING SYSTEMS 0-Bitted with 2 blank keys (For quality control purposes, PDQ "0" bit cylinders are actually keyed to a 1 bit and a 1 bit key is sent to open cylinders.) Keyed Alike / 4 or less Cylinders (KA4) N/C Keyed Alike / 5 or more Cylinders (KA) $6.00 Master Keying with Bitting List (MK) (GMK) $11.80 Construction Keying (in addition to other keying charges) $11.80 Keyed to existing numbers $8.00 Extra Cut Change, Master, or Control Keys $5.80 Extra Cut Large Bow Keys - SCC / SCE $8.00 Extra Cut Large Bow Keys - SCC / SCE when furnished with deadbolt $8.00 Bitting List for Factory Master Key Production $95.00 HIGH SECURITY CYLINDERS AND CORES SEE PAGE 127 for HIGH SECURITY CYLINDERS AND CORES All High Security Cylinders are in addition to lock price and are calculated at parts discount. N/C VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 KT SERIES DEADBOLT LOCKS HOW TO ORDER QUANTITY SERIES FUNCTION FINISH BACKSET KEYWAY KEYING 10 KT 116 626 234 SCC KD NOTE: Case quantity is 10 / Case weight is 19 lbs. Single Cylinder / Case weight is 22 lbs. Double Cylinder / For split finishes, designate O/S trim first, then I/S 107

KT SERIES IC CORES PDQ DESCRIPTION NO. AS PART OF LOCK INDIVIDUALLY UNCOMBINATED CORES 6 Pin Cores I5206 + KEYWAY $40.00 $40.00 7 Pin Cores I5207 + KEYWAY $43.00 $43.00 COMBINATED CORES 6 Pin Cores I5206-1 + KEYWAY $40.00 $65.00 7 Pin Cores I5207-1 + KEYWAY $43.00 $70.00 BEST KEYWAYS AVAILABLE: A, B, C, D, E, F, G, H, J, K, L, M, Q, WA, WB, WC, WD, WG, WH, TB, TD, TE, & R NOTES: IC Cores are available Combinated or Uncombinated Uncombinated cores do not include springs & pins Combinated cores include masterkeying Designate finish for IC Cores ordered separately: 606 or 626 Parts Discount Applies Cores are small format Control keys must be ordered seperately PDQ1, PDQ2, PDQ3 (RESTRICTED) BEST A2, A3 & A4 SYSTEMS AVAILABLE Uncombinated cores are supplied less keys, pins and springs. CONSTRUCTION CORES Construction Core 6-pin only $26.00 - Dummy Construction Core Plastic $4.50 $4.50 Construction cores are invoiced at shipment and credited upon return. Subject to 50% discount. CONVENTIONAL LARGE FORMAT CORE Schlage LFIC C KEyway $52.00 - IC Core HIGH SECURITY IC CORES SEE PAGE 127 for SFIC and LARGE FORMAT (SCHLAGE ) HIGH SECURITY IC CORES LFIC REQUIRES LARGE HOUSING All High Security Cylinders are in addition to lock price and are calculated at parts discount. VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 KT SERIES DEADBOLT LOCKS HOW TO ORDER QUANTITY SERIES FUNCTION FINISH BACKSET KEYWAY KEYING 10 KT 116 626 234 SCC KD NOTE: Case quantity is 10 / Case weight is 19 lbs. Single Cylinder / Case weight is 22 lbs. Double Cylinder / For split finishes, designate O/S trim first, then I/S 108 Rev 1 1/18/12

KT SERIES PARTS STRIKES PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE Deadbolt Strike (any finish) I4602-(designate finish) $12.00 N/C 2-3/4" x 1-1/8" Dust Box $3.80 NOTES: Parts Discount Applies Designate desired Strike & Bolt finish if ordered separately: 605, 606, 612, 613, 625 or 629 BOLTS PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE 2-3/4" BACKSET 2-1/4" x 1-1/8" I4301 $30.00 N/C 2-1/4" x 1-1/8" x 1/4" Radius I4301R $30.00 Add $1.00 Drive-in I4201-5 $30.00 N/C 2-3/8" BACKSET 2-1/4" x 1" I4302 $30.00 N/C 2-1/4" x 1" x 1/4" Radius I4302R $30.00 Add $1.00 Drive-in I4202-5 $30.00 N/C Bolt HOW TO ORDER KT SERIES DEADBOLT LOCKS QUANTITY SERIES FUNCTION FINISH BACKSET KEYWAY KEYING 10 KT 116 626 234 SCC KD NOTE: Case quantity is 10 / Case weight is 19 lbs. Single Cylinder / Case weight is 22 lbs. Double Cylinder / For split finishes, designate O/S trim first, then I/S 109

KM HEAVY DUTY SERIES DEADBOLT KM SERIES KM SERIES IC SPECIFICATIONS FOR DOORS: BACKSET: FRONT: STRIKE: DEADBOLT: HAND: TRIM: KEYS: KEYWAYS: INTERCHANGEABLE CORE: CYLINDER: KEYING: FINISHES: CERTIFICATIONS: 1-3/8" to 1-3/4" thick 2-3/4" standard (UL) Option 2-3/4" - 2-3/8" adjustable with 2-1/4" x 1" faceplate available (Not U.L. Listed) 2-1/4" x 1-1/8" / Stainless Steel or Wrought Brass 2-3/4" x 1-1/8" / Stainless Steel or Wrought Brass 1" Throw / Brass Bolt containing one concealed 1/4" case-hardened Steel Roll Pin Non-handed / IC 7pin Handed Stainless Steel or Wrought Brass Scalp / Reinforced Zinc Diecast Rose Two (2) per Cylinder SCC standard / Also available in keyways of other manufacturers 6 or 7-pin / Compatible with Best, Falcon and Arrow 6-pin Brass Insert Cylinder keyed to 5-pins Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems 605 (US3 ), 606 (US4), 613 (US10B), 626 (US26D) or 630 (US32D) U.L., U.L.C. Listed / Windstorm Resistant Product Listed - ANSI A250.13-2003, STM E1886-02, ASTM E330-02, Outswing: 350 ft-lbs.,inswing: N/R, Design Load Rating: 2418 lbf. KM SERIES DEADBOLT LOCKS WARRANTY: One (1) year Limited Warranty 111

KM SERIES KM DEADBOLT FUNCTIONS FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER Single Cylinder KM116 PDQ Lock or unlock by key from outside, by thumb turn from inside Double Cylinder KM137 PDQ Lock PDQ or unlock by key from both sides DEADBOLTS ANSI PDQ 605/606 NO. NO. FUNCTIONS 613/626/630 SINGLE CYLINDER E1151 116 Entrance $105.00 E0151 116 IC Entrance $131.00 NOTES: Prices do not include IC Core IC Handed LH or RH, 7 pin ADA thumbturn available special order DOUBLE CYLINDER E1141 137 Store Door $142.00 KM SERIES DEADBOLT LOCKS 112

KM SERIES KEYING RIM CYLINDERS PDQ COMPATIBLE SUBSTITUTION KEYWAY WITH 1-1/8" PRICE ARA Arrow / AR1 $54.00 N/C CO6 / CO59A1 Corbin / 60/59A1 $54.00 N/C CL4 Corbin / L4 $54.00 N/C RUD Russwin / D1 $54.00 N/C SCE Schlage / E $54.00 N/C SCC Schlage / SCC $54.00 N/C SCC-K Schlage / C-K $54.00 N/C SAL Sargent / LA $54.00 N/C RA-RC Sargent / RA-RC $54.00 N/C YA8 Yale / E1R $54.00 N/C GA Yale / GA $54.00 N/C FAL Falcon / E-R $54.00 N/C TA PDQ / TA (Restricted) $57.00 $3.00 NON Less Cylinder - Deduct $8/Cylinder NOTES: Parts Discount Applies Designate desired finish for Mortise Cylinders if ordered separately: 605, 606, 612, 613, 625 or 626 Rim Cylinder KEYING SYSTEMS 0-Bitted with 2 blank keys (For quality control purposes, PDQ "0" bit cylinders are actually keyed to a 1 bit and a 1 bit key is sent to open cylinders.) Keyed Alike / 4 or less Cylinders (KA4) N/C Keyed Alike / 5 or more Cylinders (KA) $6.00 Master Keying with Bitting List (MK) (GMK) $11.80 Construction Keying (in addition to other keying charges) $11.80 Keyed to existing numbers $8.00 Extra Cut Change, Master, or Control Keys $5.80 Extra Cut Large Bow Keys - SCC / SCE $8.00 Extra Cut Large Bow Keys - SCC / SCE when furnished with deadbolt $8.00 Bitting List for Factory Master Key Production $95.00 HIGH SECURITY CYLINDERS AND CORES SEE PAGE 127 for HIGH SECURITY CYLINDERS AND CORES All High Security Cylinders are in addition to lock price and are calculated at parts discount. N/C VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 HOW TO ORDER QUANTITY SERIES FUNCTION FINISH BACKSET KEYWAY KEYING KM SERIES DEADBOLT LOCKS 20 KM 116 630 234 SCC KD NOTE: Case quantity is 20 / Case weight varies 113

KM SERIES IC CORES PDQ DESCRIPTION NO. AS PART OF LOCK INDIVIDUALLY UNCOMBINATED CORES 6 Pin Cores I5206 + KEYWAY $40.00 $40.00 7 Pin Cores I5207 + KEYWAY $43.00 $43.00 COMBINATED CORES 6 Pin Cores I5206-1 + KEYWAY $40.00 $65.00 7 Pin Cores I5207-1 + KEYWAY $43.00 $70.00 BEST KEYWAYS AVAILABLE: A, B, C, D, E, F, G, H, J, K, L, M, Q, WA, WB, WC, WD, WG, WH, TB, TD, TE, & R NOTES: IC Cores are available Combinated or Uncombinated Uncombinated cores do not include springs & pins Combinated cores include masterkeying Designate finish for IC Cores ordered separately: 606 or 626 Parts Discount Applies Cores are small format Control keys must be ordered seperately PDQ1, PDQ2, PDQ3 (RESTRICTED) BEST A2, A3 & A4 SYSTEMS AVAILABLE Uncombinated cores are supplied less keys, pins and springs. CONSTRUCTION CORES Construction Core 6-pin only $26.00 - Dummy Construction Core Plastic $4.50 $4.50 Construction cores are invoiced at shipment and credited upon return. Subject to 50% discount. CONVENTIONAL LARGE FORMAT CORE Schlage LFIC C KEyway $52.00 - IC Core HIGH SECURITY IC CORES SEE PAGE 127 for SFIC and LARGE FORMAT (SCHLAGE ) HIGH SECURITY IC CORES LFIC REQUIRES LARGE HOUSING All High Security Cylinders are in addition to lock price and are calculated at parts discount. VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 KM SERIES DEADBOLT LOCKS HOW TO ORDER QUANTITY SERIES FUNCTION FINISH BACKSET KEYWAY KEYING 20 KM 116 630 234 SCC KD NOTE: Case quantity is 20 / Case weight varies 114 Rev 1 1/18/12

KM SERIES PARTS STRIKES PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE Deadbolt Strike (any finish) I4702-(designate finish) $11.00 N/C 2-3/4" x 1-1/8" Dust Box $3.80 NOTES: Parts Discount Applies Designate desired Strike & Bolt finish if ordered separately: 605, 606, 613 or 630 BOLTS PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE 2-3/4" BACKSET (U.L.) 2-1/4" x 1-1/8" I04501 $26.00 N/C 2-1/4" x 1-1/8" x 1/4" Radius I04501R $26.00 Add $1.00 2-3/4" - 2-3/8" ADJUSTABLE 2-1/4" x 1" I04507 $26.00 N/C 2-1/4" x 1" x 1/4" Radius I04507R $26.00 Add $1.00 Drive-in I04507-5D $26.00 N/C Bolt 1-1/8" Latch Front Filler Plate I099-100 $0.80 - (Minimum of 100 pieces) HOW TO ORDER QUANTITY SERIES FUNCTION FINISH BACKSET KEYWAY KEYING KM SERIES DEADBOLT LOCKS 20 KM 116 630 234 SCC KD NOTE: Case quantity is 20 / Case weight varies 115

KV COMMERCIAL SERIES DEADBOLT KV SERIES KV SERIES IC SPECIFICATIONS FOR DOORS: BACKSET: FRONT: STRIKE: DEADBOLT: HAND: TRIM: KEYS: KEYWAYS: INTERCHANGEABLE CORE: CYLINDER: KEYING: 1-3/8" to 1-3/4" thick 2-3/4" - 2-3/8" Adjustable 2-1/4" x 1" / Stainless Steel or Wrought Brass 2-3/4" x 1-1/8" / Stainless Steel or Wrought Brass 1" Throw / Brass Bolt containing one concealed 1/4" case-hardened Steel Roll Pin Non-handed / IC 7pin Handed Stainless Steel or Wrought Brass Scalp Two (2) per Cylinder SCC standard / Also available in keyways of other manufacturers 6 or 7-pin / Compatible with Best, Falcon and Arrow 6-pin Brass Insert Cylinder keyed to 5-pins Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems FINISHES: CERTIFICATIONS: WARRANTY: 605 (US3 ), 606 (US4), 613 (US10B), 626 (US26D) or 630 (US32D) U.L., U.L.C. Listed One (1) year Limited Warranty KV SERIES DEADBOLT LOCKS 117

KV SERIES KV DEADBOLT FUNCTIONS FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER Single Cylinder KV116 PDQ Lock or unlock by key from outside, by thumb turn from inside Single Sided KV125 Deadbolt by inside thumb turn only Special door preparation required Single Sided KV125 BK Deadbolt by inside thumb turn only Double Cylinder KV137 PDQ Lock PDQ or unlock by key from both sides DEADBOLTS ANSI PDQ NO. NO. FUNCTIONS 626/630 605/606/613 SINGLE CYLINDER - Cylinder Outside / Thumbturn Inside E2152 116 Entrance $91.00 $96.00 E0152 116 IC Entrance $117.00 $121.00 NOTES: Prices do not include IC Core IC Handed LH or RH, 7 pin 125 different prep 125BK different prep DOUBLE CYLINDER E2142 137 Store Door $109.00 $113.00 KV SERIES DEADBOLT LOCKS NON-CYLINDER - Thumbturn Inside E2142 125 Communicating $51.00 $55.00 E2142 125BK Communicating $55.00 $59.00 118

KV SERIES KEYING COMBINATION CYLINDERS PDQ COMPATIBLE SUBSTITUTION KEYWAY WITH 1-1/8" PRICE ARA Arrow / AR1 $46.00 $8.00 CO6 / CO59A1 Corbin / 60/59A1 $46.00 $8.00 CL4 Corbin / L4 $46.00 $8.00 RUD Russwin / D1 $46.00 $8.00 SCE Schlage / E $46.00 $8.00 SCC Schlage / SCC $46.00 $8.00 SCC-K Schlage / C-K $46.00 $8.00 SAL Sargent / LA $46.00 $8.00 RA-RC Sargent / RA-RC $46.00 $8.00 YA8 Yale / E1R $46.00 $8.00 GA Yale / GA $46.00 $8.00 FAL Falcon / E-R $46.00 $8.00 TA PDQ / TA (Restricted) $48.00 $11.00 NON Less Cylinder - Deduct $8/Cylinder NOTES: Parts Discount Applies Designate desired finish for Mortise Cylinders if ordered separately: 605, 606, 612, 613, 625 or 626 Combination Cylinder KEYING SYSTEMS 0-Bitted with 2 blank keys (For quality control purposes, PDQ "0" bit cylinders are actually keyed to a 1 bit and a 1 bit key is sent to open cylinders.) Keyed Alike / 4 or less Cylinders (KA4) N/C Keyed Alike / 5 or more Cylinders (KA) $6.00 Master Keying with Bitting List (MK) (GMK) $11.80 Construction Keying (in addition to other keying charges) $11.80 Keyed to existing numbers $8.00 Extra Cut Change, Master, or Control Keys $5.80 Extra Cut Large Bow Keys - SCC / SCE $8.00 Extra Cut Large Bow Keys - SCC / SCE when furnished with deadbolt $8.00 Bitting List for Factory Master Key Production $95.00 HIGH SECURITY CYLINDERS AND CORES SEE PAGE 127 for HIGH SECURITY CYLINDERS AND CORES All High Security Cylinders are in addition to lock price and are calculated at parts discount. N/C VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 HOW TO ORDER QUANTITY SERIES FUNCTION FINISH BACKSET KEYWAY KEYING 20 KV 116 630 ADJ SCC KD KV SERIES DEADBOLT LOCKS NOTE: Case quantity is 20 / Case weight is 26 lbs. Single Cylinder / Case weight is 35 lbs. Double Cylinder 119

KV SERIES IC CORES PDQ DESCRIPTION NO. AS PART OF LOCK INDIVIDUALLY UNCOMBINATED CORES 6 Pin Cores I5206 + KEYWAY $40.00 $40.00 7 Pin Cores I5207 + KEYWAY $43.00 $43.00 COMBINATED CORES 6 Pin Cores I5206-1 + KEYWAY $40.00 $65.00 7 Pin Cores I5207-1 + KEYWAY $43.00 $70.00 BEST KEYWAYS AVAILABLE: A, B, C, D, E, F, G, H, J, K, L, M, Q, WA, WB, WC, WD, WG, WH, TB, TD, TE, & R NOTES: IC Cores are available Combinated or Uncombinated Uncombinated cores do not include springs & pins Combinated cores include masterkeying Designate finish for IC Cores ordered separately: 606 or 626 Parts Discount Applies Cores are small format Control keys must be ordered seperately PDQ1, PDQ2, PDQ3 (RESTRICTED) BEST A2, A3 & A4 SYSTEMS AVAILABLE Uncombinated cores are supplied less keys, pins and springs. CONSTRUCTION CORES Construction Core 6-pin only $26.00 - Dummy Construction Core Plastic $4.50 $4.50 Construction cores are invoiced at shipment and credited upon return. Subject to 50% discount. IC Core HIGH SECURITY IC CORES SEE PAGE 127 for SFIC and LARGE FORMAT (SCHLAGE ) HIGH SECURITY IC CORES NOT AVAILABLE WITH LFIC All High Security Cylinders are in addition to lock price and are calculated at parts discount. VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 KV SERIES DEADBOLT LOCKS HOW TO ORDER QUANTITY SERIES FUNCTION FINISH BACKSET KEYWAY KEYING 20 KV 116 630 ADJ SCC KD NOTE: Case quantity is 20 / Case weight is 26 lbs. Single Cylinder / Case weight is 35 lbs. Double Cylinder 120 Rev 1 1/18/12

KV SERIES PARTS STRIKES PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE Deadbolt Strike (any finish) I4702-(designate finish) $11.00 N/C 2-3/4" x 1-1/8" Dust Box $3.80 NOTES: Parts Discount Applies Designate desired finish for Strikes & Bolts if ordered separately: 605, 606, 613 or 630 BOLTS PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE 2-3/4"- 2-3/8" ADJUSTABLE 2-1/4" x 1" I04507 $26.00 N/C 2-1/4" x 1" x 1/4" Radius I04507R $26.00 Add $1.00 Drive-in I04507-5D $26.00 N/C 1-1/8" Latch Front Filler Plate I099-100 $0.85 - (Minimum of 100 pieces) Bolt HOW TO ORDER QUANTITY SERIES FUNCTION FINISH BACKSET KEYWAY KEYING 20 KV 116 630 ADJ SCC KD KV SERIES DEADBOLT LOCKS NOTE: Case quantity is 20 / Case weight is 26 lbs. Single Cylinder / Case weight is 35 lbs. Double Cylinder 121

GRADE 3 KR ULTRA-LIGHT COMMERCIAL SERIES DEADBOLT KR SERIES SPECIFICATIONS FOR DOORS: 1-3/8" to 1-3/4" thick BACKSET: 2-3/4" - 2-3/8" Adjustable FRONT: 2-1/4" x 1" / Stainless Steel or Wrought Brass STRIKE: 2-3/4" x 1-1/8" / Stainless Steel or Wrought Brass DEADBOLT: 1" Throw / Brass Bolt containing one concealed 1/4" case-hardened Steel Roll Pin HAND: Non-handed TRIM: Stainless Steel or Wrought Brass Scalp KEYS: Two (2) per Cylinder KEYWAYS: SCC CYLINDER: 5-pin Brass Rim Cylinder KEYING: Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems FINISHES: 605 (US3) or 630 (US32D) CERTIFICATIONS: WARRANTY: Meets ANSI/BHMA A156.5, Grade 3 Deadbolt One (1) year Limited Warranty 123 KR SERIES DEADBOLT LOCKS

KR SERIES KR DEADBOLT FUNCTIONS FUNCTION FUNCTION NUMBER INSIDE OUTSIDE DESCRIPTION ANSI NUMBER Single Cylinder KR116 PDQ Lock or unlock by key from outside, by thumb turn from inside Double Cylinder KR137 PDQ Lock PDQ or unlock by key from both sides DEADBOLTS ANSI PDQ NO. NO. FUNCTIONS 605/630 SINGLE CYLINDER E1151 116 Entrance $60.00 DOUBLE CYLINDER E1141 137 Store Door $66.00 HOW TO ORDER QUANTITY SERIES FUNCTION FINISH BACKSET KEYWAY KEYING KR SERIES DEADBOLT LOCKS 20 KR 116 630 ADJ SCC KD NOTE: Case quantity is 20 / Case weight is 26 lbs. Single Cylinder / Case weight is 35 lbs. Double Cylinder 124

KR SERIES CYLINDERS & KEYING SYSTEMS PDQ COMPATIBLE LIST KEYWAY WITH PRICE SCC Schlage / SCC / 5 Pin $26.00 NOTES: Parts Discount Applies Designate finish for cylinders ordered separately: 606 or 626 KEYING SYSTEMS/CONVENTIONAL CYLINDERS 0-Bitted with 2 blank keys (For quality control purposes, PDQ "0" bit N/C cylinders are actually keyed to a 1 bit and a 1 bit key is sent to open cylinders.) Keyed Alike / 4 or less Cylinders (KA4) N/C Keyed Alike / 5 or more Cylinders (KA) $6.00 Master Keying (MK) 2 Levels only $11.80 Construction Keying (CK) $11.80 Keyed to existing numbers $8.00 Extra Cut Change, Master, or Control Keys $5.80 HIGH SECURITY CYLINDERS AND CORES SEE PAGE 127 for HIGH SECURITY CYLINDERS AND CORES All High Security Cylinders are in addition to lock price and are calculated at parts discount. VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 HOW TO ORDER QUANTITY SERIES FUNCTION FINISH BACKSET KEYWAY KEYING 20 KR 116 630 ADJ SCC KD NOTE: Case quantity is 20 / Case weight is 26 lbs. Single Cylinder / Case weight is 35 lbs. Double Cylinder 125 KR SERIES DEADBOLT LOCKS

KR SERIES PARTS STRIKES PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE Deadbolt Strike (any finish) I4702-(designate finish) $11.00 N/C 2-3/4" x 1-1/8" Dust Box $3.80 NOTES: Parts Discount Applies Designate desired Strike & Bolt finish if ordered separately: 605 or 630 BOLTS PDQ LIST SUBSTITUTION DESCRIPTION NO. PRICE PRICE 2-3/4"- 2-3/8" ADJUSTABLE 2-1/4" x 1" I04507 $26.00 N/C 2-1/4" x 1" x 1/4" Radius I04507R $26.00 Add $1.00 Drive-in I04507-5D $26.00 N/C 1-1/8" Latch Front Filler Plate I099-100 $0.85 - (Minimum of 100 pieces) Bolt HOW TO ORDER QUANTITY SERIES FUNCTION FINISH BACKSET KEYWAY KEYING KR SERIES DEADBOLT LOCKS 20 KR 116 630 ADJ SCC KD NOTE: Case quantity is 20 / Case weight is 26 lbs. Single Cylinder / Case weight is 35 lbs. Double Cylinder 126

HIGH SECURITY CYLINDERS & CORES HIGH SECURITY CYLINDERS DESCRIPTION PDQ NO. 26D/626 3/605 10B/613 6 Pin Combination Cylinder KD/KA Mortise/Rim Combo Cylinder 1-1/8" 6 Pin KD/KA Mortise Cylinder 1 1/4" 6 Pin KD/KA Mortise Cylinder 1 1/2" 6 Pin KD/KA UL 437 6 Pin Combination Cylinder KD/KA UL 437 Mortise Rim Combo Cylinder 1-1/8" KD/KA UL 437 Mortise Cylinder 1-1/4" KD/KA HSC125 HSC020 HSC030 HSC050 HSC425 HSC320 HSC330 $66 $90 $90 $120 $81 $105 $105 $79.50 $107.50 $107.50 $104 $132 $132 $111 $111 $135.50 $135.50 NOTES: Prices for LF IC Mortise & Rim Cylinder Housings do not include IC Core LF IC Cores are available Designate finish when ordering IC Housing & Cores Parts Discount Applies Includes Keying Charges and 2 Cut Keys. NOTE: When ordering UL 437 Cylinders with PDQ Cylindrical or Mortise locks, the lock should be ordered Less Cylinder (LC) and a cylinder deduction applied. UL 437 and High Security Cylinders are priced at a parts discount. HIGH SECURITY LARGE FORMAT INTERCHANGEABLE CORES DESCRIPTION PDQ NO. 26D/626 SFIC Cylinder, 6 Pin SFIC Cylinder, 7 Pin LFIC Cylinder "Schlage ", 6 Pin HSC806 HSC807 HSC906 $90 $97.50 $131.25 Combination Cylinder Includes Keying Charges and 2 Cut Keys HIGH SECURITY LARGE FORMAT SCHLAGE IC HOUSINGS DESCRIPTION PDQ NO. 26D/626 LFIC Mortise Housing Less Core "Schlage " LFIC Rim Housing Less Core "Schlage " I5304-X I5303-X $56.50 $56.50 Mortise Cylinder High Security Cylinders cannot be sold "0" bitted and as a result blank keys are not available and will not be sold. KEYING SYSTEMS & SERVICES DESCRIPTION PDQ NO. 26D/626 Cut Key, 6 pin SFIC Cut Key, IC 7 pin LFIC Control Cut Key, IC 6 pin HIGH SECURITY CAMS HSC065 HSC874 HSC965 $12 $12 $12 Master Keying Charge $8.00 Construction Master Key $8.00 Grand Master Keying Charge $10.00 Great Grand Master Keying Charge $12.00 Key Marking Charge $4.60 Cylinder Marking Charge $4.60 Additional keys for high security cylinders must be cut to order DESCRIPTION PDQ NO. 26D/626 IC Core High Security Core Adams Rite Type Cam Yale Type Cam Yale Narrow Type Cam Russwin Type Cam Falcon Type Cam Schlage Type Cam Sargent Offset Type Cam PDQ Cam HSCCAM1 HSCCAM2 HSCCAM2A HSCCAM3 HSCCAM4 HSCCAM7 HSCCAM8 HSCCAM3 $12 $12 $12 $12 $12 $12 $12 $12 Key Blank 127

CYLINDERS & KEYING SYSTEMS 16-SERIES MORTISE CYLINDERS PDQ COMPATIBLE KEYWAY WITH 15/16", 1-1/8", 1-1/4" 1-1/2", 1-3/4" ARA Arrow / AR1 $54.00 CO6 / CO59A1 Corbin / 60/59A1 $54.00 CL4 Corbin / L4 $54.00 RUD Russwin / D1 $54.00 SCE Schlage / E $54.00 SCC Schlage / SCC $54.00 $78.00 SCC-K Schlage / C-K $54.00 SAL Sargent / LA $54.00 RA-RC Sargent / RA-RC $54.00 YA8 Yale / E1R $54.00 GA Yale/ GA $54.00 FAL Falcon / E-R $54.00 TA PDQ / TA (Restricted) $56.00 Dummy - $39.00 - T-Turn - $41.00-17-SERIES RIM CYLINDERS PDQ COMPATIBLE KEYWAY WITH ARA Arrow / AR1 $54.00 CO6 / CO59A1 Corbin / 60/59A1 $54.00 CL4 Corbin / L4 $54.00 RUD Russwin / D1 $54.00 SCE Schlage / E $54.00 SCC Schlage / SCC $54.00 SCC-K Schlage / C-K $54.00 SAL Sargent / LA $54.00 SAS Sargent / SAS $54.00 RA-RC Sargent / RA-RC $54.00 YA8 Yale / E1R $54.00 GA Yale / GA $54.00 FAL Falcon / E-R $54.00 TA PDQ / TA (Restricted) $56.00 Dummy* - $39.00 KEYING SYSTEMS KEYING SYSTEMS/CONVENTIONAL CYLINDERS - COMMERCIAL 0-Bitted with 2 blank keys (For quality control purposes, PDQ "0" bit N/C cylinders are actually keyed to a 1 bit and a 1 bit key is sent to open cylinders.) Keyed Alike / 4 or less Cylinders (KA4) N/C Keyed Alike / 5 or more Cylinders (KA) $6.00 Master Keying with Bitting List (MK) (GMK) $11.80 Construction Keying (CK) (in addition to other keying charges) $11.80 Keyed to existing numbers $8.00 Extra Cut Change, Master, or Control Keys $5.80 Extra Cut Large Bow Keys - SCC / SCE $8.00 Extra Cut Large Bow Keys - SCC / SCE when furnished with lock $8.00 Bitting List for Factory Master Key Production $95.00 NOTES: Parts Discount Applies Designate finish when ordering cylinders For Mortise Cylinder lengths over 1-1/2" consult Customer Service for availability Dummy Mortise Cylinder available in 15/16" only T-Turn Mortise Cylinder available in 15/16" only Combination Cylinder Mortise Cylinder Visual Key Control VISUAL KEY CONTROL Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 *Special Order, consult factory. 128

CYLINDER HOUSING INTERCHANGEABLE CORE SMALL FORMAT MORTISE & RIM CYLINDER HOUSINGS - LESS CORES PDQ DESCRIPTION NO. IC Mortise Cylinder Housing 6-pin 1-1/4" I5306- $54.00 IC Mortise Cylinder Housing 7-pin 1-3/8" I5307- $54.00 IC Mortise Cylinder Tapered 6-pin 1/2" I53013-067 $54.00 IC Mortise Cylinder Tapered 7-pin 1/2" I53013-077 $54.00 IC Rim Cylinder Housing (for both 6-pin/7-pin cores) I5308- $54.00 NOTES: Prices for IC Mortise & Rim Cylinder Housings do not include IC Core IC Cores are available Combinated or Uncombinated Uncombinated cores do not include springs & pins Combinated cores include masterkeying Designate finish when ordering IC Housing & Cores Parts Discount Applies Cores are small format SMALL FORMAT CORES PDQ DESCRIPTION NO. WITH LOCK SEPARATE UNCOMBINATED CORES 6 Pin Cores I5206 + KEYWAY $40.00 $40.00 7 Pin Cores I5207 + KEYWAY $43.00 $43.00 COMBINATED CORES 6 Pin Cores I5206-1 + KEYWAY $40.00 $65.00 7 Pin Cores I5207-1 + KEYWAY $43.00 $70.00 IC Core BEST KEYWAYS AVAILABLE: A, B, C, D, E, F, G, H, J, K, L, M, Q, WA, WB, WC, WD, WG, WH, TB, TD, TE, & R PDQ1, PDQ2, PDQ3 (RESTRICTED) BEST A2, A3 & A4 SYSTEMS AVAILABLE CONSTRUCTION CORES Construction Core 6-pin only $24.00 - Dummy Construction Core Plastic $ 4.50 $ 4.50 Knob Parts Construction cores are invoiced at shipment and credited upon return. Subject to 50% discount. CONVENTIONAL LARGE FORMAT CORE Schlage LFIC C Keyway $52.00 - VISUAL KEY CONTROL IC Mortise Housing Cylinder Marking AA1, AA2, Etc. (Per Cylinder) $4.60 Key Marking AA1, AA2, Etc. (Per Key) $4.60 Key Marking other than Keyset (Per Key) $4.60 *Double letter Best Cores-Contact Factory for availability and price Mortise Parts 129 Rev 1 1/18/12

MISCELLANEOUS PARTS KEY BLANKS (50 PIECE MINIMUM ORDER) PDQ COMPATIBLE PRICE EACH KEYWAY WITH 5-pin 6-pin ARA Arrow / AR1 $1.00 $1.10 CO6 / CO59A1 Corbin / 60/59A1 $1.00 $1.10 CL4 Corbin / L4 $1.00 $1.10 RUD Russwin / D1 $1.00 $1.10 SCC Schlage / SCC $1.00 $1.10 SCE Schlage / E $1.00 $1.10 SAL Sargent / LA $1.00 $1.10 SAS Sargent / SAS $1.00 $1.10 RA-RC Sargent / RA-RC $1.00 $1.10 YA8 Yale / E11 $1.00 $1.10 GA Yale / GA $1.00 $1.10 FAL Falcon / E-R $1.00 $1.10 KW Kwikset / KW $1.00 - Segal Segal $1.00 $1.10 TA PDQ / TA (Restricted) $1.60 $1.70 Large Bow Key SCC $2.80 $3.00 Large Bow Key SCE $2.80 $3.00 INTERCHANGEABLE CORE KEY BLANKS PRICE EACH A, B, C, D, E, F, G, H, J, K, L, M, Q,WA, WB, WC, $1.80 WD, WG, WH, TB, TD, TE, & R COLLARS & CAMS DESCRIPTION PDQ NO. MORTISE CYLINDER CAMS Cam (Corbin A01) For #16 mortise Cylinder I127-4201 $6.20 AR Cam I127-4205 $6.20 YL Cam I127-4202 $6.20 EM Cam I127-4206 $6.20 PDQ Cam I127-4201 $6.20 IC CAMS AR IC Cam I5401 $6.20 Clover IC Cam I5402 $6.20 Yale IC Cam I5403 $6.20 Sargent IC Cam I5404 $6.20 Schlage IC Cam I5405 $6.20 Lockwood IC Cam I5407 $6.20 Mortise Cylinder Collar Adj I4230 $6.20 IC Cam for SFIC Mortise Housing I54061 $6.20 IC Cam for LFIC Mortise housing I54261 $6.20 Spacer Ring - 5/32'' I034 $1.10 NOTES: Parts Discount Applies Designate finish when ordering miscellaneous parts Kwikset cylinder available in 5 pin only 6 Pin Key Blank 5 Pin Key Blank Collars MISCELLANEOUS PARTS DESCRIPTION PDQ NO. 1-1/4'' x 4-7/8'' ANSI Dust Box (Specified with Lock) Y025-SBX N/C 1-1/4'' x 4-7/8'' ANSI Dust Box Y025-SBX $3.80 T-Strike Dust Box (Specified with Lock) I0251 N/C T-Strike Dust Box I0251 $3.80 FL-Strike Dust Box (Specified with Lock) I0251R N/C FL-Strike Dust Box I0251R $3.80 1-1/8'' x 2-3/4'' Deadbolt Dust Box I4701 $3.80 IC Tailpiece assembly includes tailpiece and spacer VP92905 $7.60 GP Screwpack (any finish) / GT Screwpack (any finish) V91910 / VA10030 $6.00 1-1/8'' Latch Front Filler Plate (Minimum of 100 pieces) I099-100 $.75 Cams LFIC & SFIC Tailpieces 130 Rev 1 1/18/12

THIS PAGE LEFT BLANK INTENTIONALLY

TRADITIONAL STYLE AMERICAN EAGLE 3100 COMMERCIAL SERIES DOOR CONTROL 3100 SERIES 3100 SERIES DOOR CLOSER SPECIFICATIONS HANDING: OPERATION: BODY: ADJUSTMENT: SIZE: MOUNTING: COVER: FINISHES: CERTIFICATION: WARRANTY: COUNTRY OF ORIGIN: The American Eagle 3100 Series is a traditional style door control for use on commercial door applications. Fasteners are provided to facilitate installation on wood, hollow metal and aluminum doors and frames.the 3100 series is non-handed and tri-packed for maximum versatility to permit regular, top jamb and parallel arm installations. The common 9-1/16 mounting hole pattern permits simple installation on new or retrofit applications. Non-handed Rack and pinion design High strength aluminum alloy Adjustable controlled closing / Separate hydraulic backcheck standard / Separate sweep, latch and backcheck intensity valves Adjustable spring size 1 through 4 or 3 through 6 / Available to meet barrier free opening force requirements Common 9-1/16 mounting hole pattern / Tri-packed for regular, top jamb and parallel arm installations / Optional hold open arm / Optional DS heavy duty parallel stop arm / Sex nuts and bolts standard / Self drilling self tapping screws available Streamline plastic cover optional Sprayed aluminum, dark duranodic bronze and gold UL and ULC listed / Certified ANSI A156.4-2000 Grade 1 / Complies with UL 10C and UBC 7.2 (1997) Twenty-Five (25) year limited warranty Manufactured in the Republic of South Korea, a country that has signed a Trade Agreements Act with the U.S.A. and is identified as a Designated Country; thus, waiving the Buy American Act. 131

3100 SERIES HOW TO ORDER 3100 SERIES DOOR CLOSER Closer Series SERIES APPLICATION FINISH PA Tri-Pack (standard) HO Hold Open, Tri-Pack DS Door Saver Arm DSHO Door Saver Hold Open Arm TA Track Arm 689 Aluminum 695 Duro Bronze 696 Gold 31 00 PA BC 689 SV 00 Adjustable Size 3-6 01 Adjustable Size Barrier Free (BF -4) BC Adjustable Hydraulic Backcheck (Standard) Blank SNB (standard) BP Back Plate DP Drop Plate NFB Narrow Frame Bracket SV Streamline Cover SIZE BACKCHECK OPTIONS NOTE: Case quantity is 10 / Case weight is 61 lbs. SIZE SELECTOR APPLICATION CLOSER SIZE INTERIOR DOOR WIDTH EXTERIOR DOOR WIDTH Regular / Top Jamb 1 2 3 4 5 6 2 0 2 6 3 0 3 6 4 0 4 6 2 0 2 6 3 0 3 6 4 0 Parallel Arm 3 4 5 6 2 6 3 0 3 6 4 0 2 6 3 0 3 6 Note: 3100 Series Closers can be installed and adjusted to meet 5 lbf. and 8.5 lbf. barrier free applications. However, it can not be guaranteed the door will close and latch while complying with barrier free restrictions. 132

3100 SERIES CLOSERS PART 3100 BC PA 3100 BC HO 3100 BC DS 3100 BC DSHO DESCRIPTION Closer, non-sized 3-6, SNB (Tri Pack) Closer, non-sized 3-6, hold open, SNB (Tri Pack) Closer, non-sized 3-6, door saver, SNB (Tri Pack) Closer, non-sized 3-6, door saver hold open, SNB (Tri Pack) PAINTED $206 $318 $358 $368 3100 SERIES DOOR CLOSER 3101 BC PA 3101 BC HO 3101 BC DS 3101 BC DSHO Closer, non-sized BF*-4, SNB (Tri Pack) Closer, non-sized BF*-4, hold open, SNB (Tri Pack) Closer, non-sized BF*-4, door saver, SNB (Tri Pack) Closer, non-sized BF*-4, door saver hold open, SNB (Tri Pack) $206 $318 $358 $368 *BF = Barrier Free CROSS REFERENCE AMERICAN EAGLE CAL ROYAL CORBIN/ RUSSWIN DOR-O- MATIC DORMA HAGER LCN NORTON SARGENT YALE 3100 300 SC60 640/7300 7400 5300 1070 1370 1600 1130 50 No products are exactly alike. This cross reference represents our judgement of products that are most similar. Information has been obtained from trade sources. It is not represented nor guaranteed that any product exactly equals any other product. 133

3100 SERIES ACCESSORIES/OPTIONS 3100 SERIES DOOR CLOSER REGULAR ARM - RA HOLD OPEN ARM - HO DOOR SAVER ARM - DS DOOR SAVER HOLD OPEN - DSHO TRACK ARM - TA PARALLEL ARM BRACKET - PA* PARALLEL ARM HO BRACKET - PAHO** BACK PLATE - BP DROP PLATE - DP NARROW FRAME BRACKET - NFB STREAMLINE COVER - SV SEX NUTS AND BOLTS - SNB BLADE STOP - BS PART DESCRIPTION ACCESSORY PAINTED 319002 319005 319016 319025 319022 319008 319009 319011 319006 319004 319020 999007 999026 HO - Hold Open Arm DS - Door Saver Arm DSHO - Door Saver Hold Open Arm TA - Track Arm PAHO - Parallel Arm Hold Open Bracket BP - Back Plate DP - Drop Plate NFB - Narrow Frame Bracket for DS Arm SV - Streamline Cover SNB - Sex Nut and Bolt (set) SP - Screw Pack SDST - Self Drilling Self Tapping Screws (6 pack) BS - Blade Stop $75 $90 $110 $69 $32 $32 $35 $16 $22 $14 $11 $14 $43 Note: When using a blade stop spacer in a narrow frame application you must use the Narrow Frame bracket for proper support. *Included with closer. **Included with hold open arm 134

ARCHITECTURAL STYLE AMERICAN EAGLE 5100 FULL FEATURED COMMERCIAL SERIES DOOR CONTROL SPECIFICATIONS HANDING: OPERATION: BODY: ARM: ADJUSTMENT: SIZE: MOUNTING: COVER: FINISHES: CERTIFICATION: WARRANTY: COUNTRY OF ORIGIN: Non-handed Rack and pinion design High strength aluminum alloy Flat style arm assembly / Optional hold open arm / Optional DS/DSHO heavy duty parallel stop arm Adjustable controlled closing / Separate hydraulic backcheck standard / Separate sweep, latch and backcheck intensity valves / Optional adjustable delayed action Adjustable 1 through 6 / Can meet 5 lbf. and 8.5 lbf. barrier free requirements Tri-packed for regular, top jamb and parallel arm installations / Fasteners furnished for wood or metal doors and frames / Sex nuts and bolts standard / Self drilling self tapping screws available Full plastic cover standard (non-handed) Sprayed aluminum, dark duranodic bronze and gold / Optional polished brass and satin chrome architectural finishes UL and ULC listed / Complies with UL 10C and UBC 7.2 (1997) / Conforms to the requirements of ANSI A156.4-2000 Grade 1 / Meets the requirements of ANSI A117.1 and ADA Twenty-five (25) year limited warranty 5100 SERIES The American Eagle 5100 Series is a fully featured architectural style door control. The full cover and flat design arm assembly provide both durability and aesthetically pleasing appearance in commercial and institutional applications. The 5100 is ideally suited for installation on wood or metal doors and frames. The series is non-handed and fully adjustable size one through six for maximum flexibility. The standard tri-pack feature provides versatility to permit regular, top jamb and parallel arm installations. A range of sprayed and architectural finishes are available to compliment any decor. Manufactured in the Republic of South Korea, a country that has signed a Trade Agreements Act with the U.S.A. and is identified as a Designated Country; thus, waiving the Buy American Act. 5100 SERIES DOOR CLOSER 135

5100 SERIES HOW TO ORDER SERIES SIZE APPLICATION OPTIONS 5100 SERIES DOOR CLOSER Closer Series Adjustable Size 1-6 PA Tri-Pack (standard) HO Hold Open, Tri-Pack DS Door Saver Arm DSHO Door Saver Hold Open Arm TA Track Arm Blank SNB (standard) BP Back Plate DPTJ Top Jamb Drop Plate DPPA Parallel Arm Drop Plate NFB Narrow Frame Bracket 51 0 1 BC PA 689 BP 0 Non-Delayed Action 4 Delayed Action BC Adjustable Hydraulic Backcheck (Standard) 689 Aluminum 695 Duro Bronze 696 Gold 605 Polished Brass 626 Satin Chrome DELAYED ACTION BACKCHECK FINISH NOTE: Case quantity is 6 / Case weight is 48 lbs. SIZE SELECTOR CLOSER SIZE INTERIOR DOOR WIDTH EXTERIOR DOOR WIDTH 1 2 3 4 5 6 2 8 3 0 3 6 4 0 4 6 4 10 2 4 2 8 3 0 3 6 4 0 4 6 Note: 5100 Series Closers can be installed and adjusted to meet 5 lbf. and 8.5 lbf. barrier free applications. However, it can not be guaranteed the door will close and latch while complying with barrier free restrictions. 136

5100 SERIES CLOSERS PART DESCRIPTION PAINTED PLATED (605/626) 5101 BC PA 5101 BC HO 5101 BC DS 5101 BC DSHO Closer, non-sized 1-6, full cover, SNB (Tri Pack) Closer, non-sized 1-6, hold open, full cover, SNB (Tri Pack) Closer, non-sized 1-6, door saver, full cover, SNB (Tri Pack) Closer, non-sized 1-6, door saver hold open, full cover, SNB (Tri Pack) $246 $359 $384 $393 $459 $589 $623 $652 5100 SERIES DOOR CLOSER 5141 BC PA 5141 BC HO 5141 BC DS 5141 BC DSHO Closer, non-sized 1-6, full cover, SNB, delayed action (Tri Pack) Closer, non-sized 1-6, hold open, full cover, SNB, delayed action (Tri Pack) Closer, non-sized 1-6, door saver, full cover, SNB, delayed action (Tri Pack) Closer, non-sized 1-6, door saver hold open, full cover, SNB, delayed action (Tri Pack) $276 $389 $416 $425 $491 $621 $656 $684 CROSS REFERENCE AMERICAN EAGLE CAL ROYAL CORBIN/ RUSSWIN DOR-O- MATIC DORMA HAGER LCN NORTON SARGENT YALE 5100 900 DC3200 SC80FC 8600FC 5200 1460FC 8500 1430 3500 No products are exactly alike. This cross reference represents our judgement of products that are most similar. Information has been obtained from trade sources. It is not represented nor guaranteed that any product exactly equals any other product. 137

5100 SERIES ACCESSORIES/OPTIONS REGULAR ARM - RA HOLD OPEN ARM - HO DOOR SAVER ARM - DS DOOR SAVER HOLD OPEN - DSHO 5100 SERIES DOOR CLOSER TRACK ARM - TA PARALLEL ARM BRACKET - PA* PARALLEL ARM HO BRACKET - PAHO** BACK PLATE - BP TOP JAMB DROP PLATE - DPTJ PARALLEL ARM DROP PLATE - DPPA NARROW FRAME BRACKET - NFB FULL COVER - FC SEX NUTS AND BOLTS - SNB BLADE STOP - BS PART DESCRIPTION SEPARATE Painted Plated (605/626) 519002 519005 519016 519025 519022 519008 519023 519018 319011 519006 519004 519020 999007 999026 519006ST HO - Hold Open Arm DS - Door Saver Arm DSHO - Door Saver Hold Open Arm TA - Track Arm PAHO - Parallel Arm Hold Open Bracket BP - Back Plate DPTJ - Top Jamb Drop Plate DPPA - Parallel Arm Drop Plate NFB - Narrow Frame Bracket for DS Arm FC - Full Cover SNB - Sex Nut and Bolt (set) SP - Screw Pack SDST - Self Drilling Self Tapping Screws (6 pack) BS - Blade Stop FCM - Full Cover Metal $75 $90 $110 $69 $32 $32 $32 $35 $16 $22 $14 $11 $14 $43 $35 $111 $128 $151 $65 $65 $22 $22 $15 Note: When using a blade stop spacer in a narrow frame application you must use the Narrow Frame bracket for proper support. *Included with closer. **Included with hold open arm 138

ARCHITECTURAL STYLE AMERICAN EAGLE 5300 FULL FEATURED COMMERCIAL SERIES DOOR CONTROL SPECIFICATIONS HANDING: OPERATION: BODY: ARM: ADJUSTMENT: SIZE: MOUNTING: COVER: FINISHES: CERTIFICATION: WARRANTY: COUNTRY OF ORIGIN: Non-handed Rack and pinion design High strength aluminum alloy 5300 SERIES Flat style arm assembly / Optional hold open arm / Optional DS/DSHO heavy duty parallel stop arm Adjustable controlled closing / Separate hydraulic backcheck standard / Separate sweep, latch and backcheck intensity valves / Optional adjustable delayed action Adjustable 1 through 6 / Can meet 5 lbf. and 8.5 lbf. barrier free requirements The American Eagle 5300 Series, with modern streamline cover and flat design arm assembly, provides a compact appearance and features that meet the demands of institutional and commercial applications. The standard tri-pack, full range spring adjustment and common 12 x 3/4 mounting hole pattern make the 5300 Series well suited for stocking distribution as well as new or retrofit projects. Adjustable hydraulic backcheck prevents damage from uncontrolled door opening. The 5300 is the perfect solution for a variety of applications requiring streamline architectural grade door controls. Common 12 x 3/4 mounting hole pattern retrofits Norton 8300, Yale 3300 and DORMA 8600 / Tri-packed for regular, top jamb and parallel arm installations / Fasteners furnished for hollow metal, wood or aluminum doors and frames / Sex nuts and bolts standard / Self drilling self tapping screws available Streamline plastic cover standard (non-handed) Sprayed aluminum, dark duranodic bronze and gold / Optional polished brass and polished chrome architectural finishes UL and ULC listed / Complies with UL 10C and UBC 7.2 (1997) / Certified ANSI A-156.4-2000 Grade 1 / Meets the requirements of ANSI A117.1 and ADA Twenty-five (25) year limited warranty Manufactured in the Republic of South Korea, a country that has signed a Trade Agreements Act with the U.S.A. and is identified as a Designated Country; thus, waiving the Buy American Act. 5300 SERIES DOOR CLOSER 139

5300 SERIES HOW TO ORDER SERIES SIZE APPLICATION OPTIONS Closer Series Adjustable Size BF-6 BF = Barrier Free PA Tri-Pack (standard) HO Hold Open, Tri-Pack DS Door Saver Arm DSHO Door Saver Hold Open Arm TA Track Arm Blank SNB (standard) BP Back Plate DP Drop Plate NFB Narrow Frame Bracket 5300 SERIES DOOR CLOSER 53 0 1 BC PA 689 BP 0 Non-Delayed Action 4 Delayed Action BC Adjustable Hydraulic Backcheck (Standard) 689 Aluminum 695 Duro Bronze 696 Gold 605 Polished Brass 625 Polished Chrome DELAYED ACTION BACKCHECK FINISH NOTE: Case quantity is 6 / Case weight is 41 lbs. SIZE SELECTOR CLOSER SIZE INTERIOR DOOR WIDTH EXTERIOR DOOR WIDTH 1 2 3 4 5 6 2 8 3 0 3 6 4 0 4 6 4 10 2 4 2 8 3 0 3 6 4 0 4 6 Note: 5300 Series Closers can be installed and adjusted to meet 5 lbf. and 8.5 lbf. barrier free applications. However, it can not be guaranteed the door will close and latch while complying with barrier free restrictions. 140

5300 SERIES CLOSERS PART DESCRIPTION PAINTED PLATED (605/625) 5301 BC PA 5301 BC HO 5301 BC DS 5301 BC DSHO Closer, non-sized BF*-6, streamline cover, SNB (Tri Pack) Closer, non-sized BF*-6, hold open, streamline cover, SNB (Tri Pack) Closer, non-sized BF*-6, door saver, streamline cover, SNB (Tri Pack) Closer, non-sized BF*-6, door saver hold open, streamline cover, SNB (Tri Pack) $245 $356 $383 $392 $458 $588 $622 $650 5341 BC PA 5341 BC HO 5341 BC DS 5341 BC DSHO Closer, non-sized BF*-6, streamline cover, SNB, delayed action (Tri Pack) Closer, non-sized BF*-6, hold open, streamline cover, SNB, delayed action (Tri Pack) Closer, non-sized BF*-6, door saver, streamline cover, SNB, delayed action (Tri Pack) Closer, non-sized BF*-6, door saver hold open, streamline cover, SNB, delayed action (Tri Pack) $275 $389 $416 $425 $490 $620 $655 $680 5300 SERIES DOOR CLOSER *BF= Barrier Free CROSS REFERENCE AMERICAN EAGLE CAL ROYAL CORBIN/ RUSSWIN DOR-O- MATIC DORMA HAGER LCN NORTON SARGENT YALE 5300 801S DC3200 xm76 SC80 8600 5200 1460 8300 1430 3300 No products are exactly alike. This cross reference represents our judgement of products that are most similar. Information has been obtained from trade sources. It is not represented nor guaranteed that any product exactly equals any other product. 141

5300 SERIES ACCESSORIES/OPTIONS REGULAR ARM - RA HOLD OPEN ARM - HO DOOR SAVER ARM - DS DOOR SAVER HOLD OPEN - DSHO 5300 SERIES DOOR CLOSER TRACK ARM - TA PARALLEL ARM BRACKET - PA* PARALLEL ARM HO BRACKET - PAHO** BACK PLATE - BP DROP PLATE - DP NARROW FRAME BRACKET - NFB STREAMLINE COVER - SV SEX NUTS AND BOLTS - SNB BLADE STOP - BS PART DESCRIPTION SEPARATE Painted Plated (605/626) 539002 HO - Hold Open Arm $75 $111 539005 DS - Door Saver Arm $90 $128 539016 DSHO - Door Saver Hold Open Arm $110 $151 539025 TA - Track Arm $69 $65 539022 PAHO - Parallel Arm Hold Open Bracket $32 539008 BP - Back Plate $32 539009 DP - Drop Plate $35 319011 NFB - Narrow Frame Bracket for DS Arm $16 539006 SV - Streamline Cover $22 $65 539004 SNB - Sex Nut and Bolt (set) $14 $22 539020 SP - Screw Pack $11 $22 999007 SDST - Self Drilling Self Tapping Screws (6 pack) $14 $15 999026 BS - Blade Stop $43 Note: When using a blade stop spacer in a narrow frame application you must use the Narrow Frame bracket for proper support. *Included with closer. **Included with hold open arm 142

ARCHITECTURAL STYLE AMERICAN EAGLE 5500 FULL FEATURED COMMERCIAL SERIES DOOR CONTROL SPECIFICATIONS HANDING: OPERATION: BODY: ARM: ADJUSTMENT: SIZE: MOUNTING: COVER: FINISHES: CERTIFICATION: WARRANTY: COUNTRY OF ORIGIN: Non-handed Rack and pinion design High strength aluminum alloy Flat style arm assembly / Optional hold open arm / Optional DS/DSHO heavy duty parallel stop arm Adjustable controlled closing / Separate hydraulic backcheck standard / Separate sweep, latch and backcheck intensity valves / Optional adjustable delayed action Adjustable 1 through 6 / Can meet 5 lbf. and 8.5 lbf. barrier free requirements Common 12 x 3/4 mounting hole pattern retrofits Norton 8500, Yale 3500 and DORMA 8600FC / Tri-packed for regular, top jamb and parallel arm installations / Fasteners furnished for hollow metal, wood or aluminum doors and frames / Sex nuts and bolts standard / Self drilling self tapping screws available Full plastic cover standard (non-handed) Sprayed aluminum, dark duranodic bronze and gold / Optional polished brass and polished chrome architectural finishes UL and ULC listed / Complies with UL 10C and UBC 7.2 (1997) / Certified ANSI A-156.4-2000 Grade 1 / Meets the requirements of ANSI A117.1 and ADA Twenty-five (25) year limited warranty 5500 SERIES The American Eagle 5500 Series narrow projection door control features a full cover, flat style arm, hydraulic backcheck and adjustable spring power size one through six. This series can be adjusted to comply with barrier free opening force restrictions. A common 12 x 3/4 mounting hole pattern provides flexibility for simple installation on new or retrofit applications. The 5500 is non-handed and furnished with the required brackets for regular, top jamb and parallel arm mounts. The 5500 Series provides the features, aesthetic qualities and durability demanded of architectural grade closers. Manufactured in the Republic of South Korea, a country that has signed a Trade Agreements Act with the U.S.A. and is identified as a Designated Country; thus, waiving the Buy American Act. 5500 SERIES DOOR CLOSER 143

5500 SERIES HOW TO ORDER SERIES SIZE APPLICATION OPTIONS Closer Series Adjustable Size BF-6 BF = Barrier Free PA Tri-Pack (standard) HO Hold Open, Tri-Pack DS Door Saver Arm DSHO Door Saver Hold Open Arm TA Track Arm Blank SNB (standard) BP Back Plate DPTJ Top Jamb Drop Plate DPPA Parallel Arm Drop Plate NFB Narrow Frame Bracket 55 0 1 BC PA 689 BP 5500 SERIES DOOR CLOSER 0 Non-Delayed Action 4 Delayed Action BC Adjustable Hydraulic Backcheck (Standard) 689 Aluminum 695 Duro Bronze 696 Gold 605 Polished Brass 625 Polished Chrome DELAYED ACTION BACKCHECK FINISH NOTE: Case quantity is 6 / Case weight is 41 lbs. SIZE SELECTOR CLOSER SIZE INTERIOR DOOR WIDTH EXTERIOR DOOR WIDTH 1 2 3 4 5 6 2 8 3 0 3 6 4 0 4 6 4 10 2 4 2 8 3 0 3 6 4 0 4 6 Note: 5500 Series Closers can be installed and adjusted to meet 5 lbf. and 8.5 lbf. barrier free applications. However, it can not be guaranteed the door will close and latch while complying with barrier free restrictions. 144

5500 SERIES CLOSERS PART DESCRIPTION PAINTED PLATED (605/625) 5501 BC PA 5501 BC HO 5501 BC DS 5501 BC DSHO Closer, non-sized BF*-6, full cover, SNB (Tri Pack) Closer, non-sized BF*-6, hold open, full cover, SNB (Tri Pack) Closer, non-sized BF*-6, door saver, full cover, SNB (Tri Pack) Closer, non-sized BF*-6, door saver hold open, full cover, SNB (Tri Pack) $245 $356 $383 $392 $458 $588 $622 $650 5541 BC PA 5541 BC HO 5541 BC DS 5541 BC DSHO *BF= Barrier Free Closer, non-sized BF*-6, full cover, SNB, delayed action (Tri Pack) Closer, non-sized BF*-6, hold open, full cover, SNB, delayed action (Tri Pack) Closer, non-sized BF*-6, door saver, full cover, SNB, delayed action (Tri Pack) Closer, non-sized BF*-6, door saver hold open, full cover, SNB, delayed action (Tri Pack) $275 $389 $416 $425 $490 $620 $655 $680 5500 SERIES DOOR CLOSER CROSS REFERENCE AMERICAN EAGLE CAL ROYAL CORBIN/ RUSSWIN DOR-O- MATIC DORMA HAGER LCN NORTON SARGENT YALE 5500 900 DC3200 SC80FC 8600FC 5200 1460FC 8500 1430 3500 No products are exactly alike. This cross reference represents our judgement of products that are most similar. Information has been obtained from trade sources. It is not represented nor guaranteed that any product exactly equals any other product. 145

5500 SERIES ACCESSORIES/OPTIONS REGULAR ARM - RA HOLD OPEN ARM - HO DOOR SAVER ARM - DS DOOR SAVER HOLD OPEN - DSHO TRACK ARM - TA PARALLEL ARM BRACKET - PA* PARALLEL ARM HO BRACKET - PAHO** BACK PLATE - BP 5500 SERIES DOOR CLOSER TOP JAMB DROP PLATE - DPTJ PARALLEL ARM DROP PLATE - DPPA NARROW FRAME BRACKET - NFB FULL COVER - FC SEX NUTS AND BOLTS - SNB BLADE STOP - BS PART DESCRIPTION SEPARATE Painted Plated (605/626) 559003 559002 559005 559016 559025 559022 559008 559023 559018 359011 559006 559004 559020 999007 999026 RA - Regular Arm HO - Hold Open Arm DS - Door Saver Arm DSHO - Door Saver Hold Open Arm TA - Track Arm PAHO - Parallel Arm Hold Open Bracket BP - Back Plate DPTJ - Top Jamb Drop Plate DPPA - Parallel Arm Drop Plate NFB - Narrow Frame Bracket for DS Arm FC - Full Cover SNB - Sex Nut and Bolt (set) SP - Screw Pack SDST - Self Drilling Self Tapping Screws (6 pack) BS - Blade Stop $43 $75 $90 $110 $69 $32 $32 $32 $35 $16 $22 $14 $11 $14 $43 $87 $111 $128 $151 $65 $39 $65 $22 $22 $15 Note: When using a blade stop spacer in a narrow frame application you must use the Narrow Frame bracket for proper support. *Included with closer. **Included with hold open arm 146

ARCHITECTURAL STYLE AMERICAN EAGLE 7100 HEAVY DUTY FULL FEATURED COMMERCIAL SERIES DOOR CONTROL SPECIFICATIONS HANDING: OPERATION: BODY: ARM: ADJUSTMENT: SIZE: MOUNTING: COVER: FINISHES: CERTIFICATION: WARRANTY: COUNTRY OF ORIGIN: The American Eagle 7100 Series is a heavy duty, fully featured architectural style door control. A high strength cast iron body and forged steel arm assembly provides maximum durability and reliability in the most brutal environments. Recommended applications include high frequency abusive installations such as schools, universities, military bases and the most demanding commercial buildings.the backcheck positioning valve feature provides a consistent backcheck snubbing range for regular, top jamb and parallel arm applications, preventing costly damage during forceful opening of the door. The 7100 Series has a fully adjustable spring range that can be set to meet barrier free requirements. The 7100 Series is the right choice when you need strong, reliable door control unit. Non-handed Rack and pinion design High strength cast iron Forged steel main arm / Flat style arm assembly / Optional hold open arm / Optional DS/DSHO heavy duty parallel stop arm Adjustable controlled closing / Separate hydraulic backcheck standard / Backcheck positioning valve standard / Separate sweep, latch, backcheck intensity and backcheck positioning valves / Optional delayed action (in lieu of backcheck) Adjustable 1 through 6 / Barrier free option available (special order required) Tri-packed for regular, top jamb and parallel arm installations / Fasteners for metal and wood doors and frames / Sex nuts and bolts standard / Retrofits LCN 4040 Series / Self drilling self tapping screws available Full plastic cover standard (non-handed) Sprayed aluminum, dark duranodic bronze and gold / Optional polished brass and polished chrome architectural finishes UL and ULC listed / Complies with UL 10C and UBC 7.2 (1997) / Conforms to the requirements of ANSI A156.4-2000 Grade 1 / Meets the requirements of ANSI A117.1 and ADA Twenty-five (25) year limited warranty 7100 SERIES Manufactured in the Republic of South Korea, a country that has signed a Trade Agreements Act with the U.S.A. and is identified as a Designated Country; thus, waiving the Buy American Act. 7100 SERIES DOOR CLOSER 147

7100 SERIES HOW TO ORDER SERIES SIZE APPLICATION OPTIONS Closer Series Adjustable Size 1-6 PA Tri-Pack (standard) HO Hold Open, Tri-Pack DS Door Saver Arm DSHO Door Saver Hold Open Arm Blank SNB (standard) BP Back Plate BPTJ Top Jamb Back Plate DPTJ Top Jamb Drop Plate DPPA Parallel Arm Drop Plate NFB Narrow Frame Bracket 71 0 1 BC PA 689 BP 7100 SERIES DOOR CLOSER 0 Non-Delayed Action 4 Delayed Action (in lieu of backcheck) BC Adjustable Hydraulic Backcheck (Standard) Backcheck Positioning (Standard) 689 Aluminum 695 Duro Bronze 696 Gold 605 Polished Brass 625 Polished Chrome DELAYED ACTION BACKCHECK FINISH NOTE: Case quantity is 4 / Case weight is 50 lbs. SIZE SELECTOR CLOSER SIZE INTERIOR DOOR WIDTH EXTERIOR DOOR WIDTH 1 2 3 4 5 6 5 lbf. 2 10 3 2 4 0 4 6 5 0 8.5 lbf. 2 6 3 0 3 6 4 0 Note: 7100 Series Closers can be installed and adjusted to meet 5 lbf. and 8.5 lbf. barrier free applications. However, it can not be guaranteed the door will close and latch while complying with barrier free restrictions. 148

7100 SERIES CLOSERS PART DESCRIPTION PAINTED PLATED (605/625) 7101 BC PA 7101 BC HO 7101 BC DS 7101 BC DSHO Closer, non-sized 1-6, full cover, SNB (Tri Pack) Closer, non-sized 1-6, hold open, full cover, SNB (Tri Pack) Closer, non-sized 1-6, door saver, full cover, SNB (Tri Pack) Closer, non-sized 1-6, door saver hold open, full cover, SNB (Tri Pack) $360 $489 $500 $512 $548 $677 $688 $700 7141 DA PA 7141 DA HO 7141 DA DS 7141 DA DSHO Closer, non-sized 1-6, full cover, SNB, delayed action (Tri Pack) Closer, non-sized 1-6, hold open, full cover, SNB, delayed action (Tri Pack) Closer, non-sized 1-6, door saver, full cover, SNB, delayed action (Tri Pack) Closer, non-sized 1-6, door saver hold open, full cover, SNB, delayed action (Tri Pack) $380 $519 $520 $532 $568 $707 $708 $720 CROSS REFERENCE AMERICAN EAGLE CAL ROYAL CORBIN/ RUSSWIN DOR-O- MATIC DORMA HAGER LCN NORTON SARGENT YALE 7100 SERIES DOOR CLOSER 7100 CR441 DC6200 SC70 8900 5100 4040 7500 350 4400 No products are exactly alike. This cross reference represents our judgement of products that are most similar. Information has been obtained from trade sources. It is not represented nor guaranteed that any product exactly equals any other product. 149 Rev 1 1/18/12

7100 SERIES ACCESSORIES/OPTIONS REGULAR ARM - RA HOLD OPEN ARM - HO DOOR SAVER ARM - DS DOOR SAVER HOLD OPEN - DSHO PARALLEL ARM BRACKET - PA* BACK PLATE - BP TOP JAMB BACK PLATE - BPTJ TOP JAMB DROP PLATE - DPTJ PARALLEL ARM DROP PLATE - DPPA NARROW FRAME BRACKET - NFB FULL COVER - FC SEX NUTS AND BOLTS - SNB 7100 SERIES DOOR CLOSER BLADE STOP - BS PART DESCRIPTION SEPARATE Painted Plated (605/626) 719003 719002 719005 719016 719001 719008 719024 719023 719018 319011 719006 719004 719020 719007 999026 719006ST RA - Regular Arm HO - Hold Open Arm DS - Door Saver Arm DSHO - Door Saver Hold Open Arm PA - Parallel Arm Bracket BP - Back Plate BPTJ - Top Jamb Back Plate DPTJ - Top Jamb Drop Plate DPPA - Parallel Arm Drop Plate NFB - Narrow Frame Bracket for DS Arm FC - Full Cover SNB - Sex Nut and Bolt (set) SP - Screw Pack SDST - Self Drilling Self Tapping Screws BS - Blade Stop FCM - Full Metal Cover $66 $93 $112 $123 $13 $36 $34 $34 $34 $32 $36 $13 $13 $17 $45 $40 $184 $221 $198 $195 $68 $110 $20 $22 $17 $80 Note: When using a blade stop spacer in a narrow frame application you must use the Narrow Frame bracket for proper support. *Included with closer. 150

AMERICAN EAGLE 4200 COMMERCIAL SERIES EXIT DEVICE The American Eagle 4200 Series offers a reliable and economical solution for compliance with life safety and fire code requirements. The 4200 is available in painted colors and architectural finishes with metal chassis cover and end cap. Function is determined by the trim selection, making the device well suited to stocking distributors. Rim and surface vertical rod applications are available to provide both security and egress. 4200 SERIES SPECIFICATIONS CHASSIS: RAIL: TOUCH PAD: LATCH BOLT: Cadmium plated steel Heavy gauge steel or stainless steel Heavy gauge steel or stainless steel Stainless steel dead locking / 3/4 throw rim / 5/8 STRIKE: PROJECTION: HAND: DOGGING: APPLICATION: STILE WIDTH: DOOR THICKNESS: DOOR WIDTH: DEVICE FINISHES: FASTENERS: CERTIFICATION: WARRANTY: Standard strike works with 161 prep with 5/8" stop and standard door gap of 1/8" 2-5/8 projection Device is non-handed Hex key dogging standard / No dogging on fire labeled devices Rim or surface vertical rod (7 0 tall door standard) 4-1/4 minimum 1-3/4 Supplied Standard for 3 ft doors Consult Door Width Chart (page 152) to determine correct device for your application Aluminum, duro, gold, satin chrome, polished brass and satin stainless steel Fasteners furnished for wood and metal door applications / Sex nuts and bolts standard with fire labeled devices UL/ULC listed for Panic, Fire Exit Hardware labeled for up to 1-1/2 hour for 3 0 x 7 0 maximum single, 6 0 x 7 0 maximum pairs / Complies with UL 10C and UBC 7.2 (1997) Five (5) year limited warranty 4200 SERIES EXIT DEVICE 151

4200 SERIES HOW TO ORDER SERIES APPLICATION SIZE TRIM Exit Device Series R Rim V Surface Vertical Rod 3 ft unit standard A size for 3 2-4 0 door maximum Consult Door Width Chart (Page 152) to determine correct device for your application Specify As Required (Example Shown) 42 00 * R F A 630 429LPKH 00 Hex Key Dogging (Standard) * Dogging Not Furnished With Fire Labeled Devices F Fire Labeled No Designation Egress (Panic) Labeled 689 Aluminum 695 Duro Bronze 696 Gold 605 Polished Brass 626 Satin Chrome 630 Satin Stainless Steel DOGGING LABELING FINISH 4200 SERIES EXIT DEVICE NOTE: Rim Case quantity is 4 / 3 Case weight is 43 lbs. / 4 Case weight is 45 lbs. Vertical Case quantity is 4 / 3 Case weight is 61 lbs. / 4 Case weight is 67 lbs. EXIT DEVICES PART DESCRIPTION PAINTED PLATED (689/695/696) (605/626) (630) 4200R 4200RA Exit, rim, UL panic listed, hex key dogging, 3 0 door Exit, rim, UL panic listed, hex key dogging, 4 0 door $333 $365 $482 $537 $569 $637 4200RF 4200RFA Exit, rim, UL fire listed, no dogging, 3 0 door Exit, rim, UL fire listed, no dogging, 4 0 door $434 $456 $577 $608 $682 $755 4200V 4200VA Exit, surface vertical rod, UL panic listed, hex key dogging, 3 0 door Exit, surface vertical rod, UL panic listed, hex key dogging, 4 0 door $636 $658 $783 $815 $864 $937 4200VF 4200VFA Exit, surface vertical rod, UL fire listed, no dogging, 3 0 door Exit, surface vertical rod, UL fire listed, no dogging, 4 0 door $705 $727 $847 $880 $931 $1004 152

4200 SERIES TRIM SELECTION ANSI FUNCTION 01 DESCRIPTION Exit only, no trim or blank escutcheon. PULL PLATE/BLANK ESCUTCHEON NARROW ESCUTCHEON TRIM HEAVY DUTY WIDE ESCUTCHEON TRIM KEY-IN- KNOB/LEVER ROSE TRIM HEAVY DUTY KEY-IN-LEVER ROSE TRIM GRIP PULL/THUMB PIECE* 429 PTD 02 Entrance by trim when actuating bar is locked down (dummy trim). 429 PUN 429 LPENX 429 LPENXH 429 GPH 03 Entrance by trim when latch bolt is retracted by key. Key removable only when locked (night latch). 429 PUK 429 LPS 429 LPSH/ 429 LPSH-IC 429 GPG** 05 Entrance by thumb piece. Key locks or unlocks thumb piece (classroom thumb piece). 429 GPK 08 Entrance by knob or lever. Key unlocks knob or lever (classroom knob/lever). 429 LPEKF 429 LPEKFH 429 LPK/ 429 CQK 429 LPKH/ 429 LPKH-IC 09 14 15 Entrance by knob or lever only when released by key. Key removable only when locked (storeroom knob/lever). Entrance by trim when latch bolt is released by knob or lever. Always active, no cylinder (passage knob/lever). Entrance by trim when latch bolt is released by thumb piece. Always active, no cylinder (passage thumb piece). 429 LPEKX 429 LPEKXH 429 LPENF 429 LPENFH 429 LPN/ 429 CQN 429 LPNH 429 GPN 4200 SERIES EXIT DEVICE Note: *429 Series Grip Pull furnished with 1-1/4 mortise cylinder (1-1/8 cylinder will also work, except GPG) **429 GPG furnished with 1-1/4 mortise cylinder with rim tail piece 153

4200 SERIES TRIM OPTIONS 429 PTD 429 PUN 429 PUK 429 LPENX/429 LPENF 429 LPEKF/429 LPEKX 429 LPENXH/429 LPENFH 429 LPEKFH/429 LPEKXH 429 LPS/429 LPK 429 LPN 429 CQK 4200 SERIES EXIT DEVICE 429 CQN 429 LPSH/429 LPKH 429 LPSH-IC/429 LPKH-IC 429 LPNH 429 GPH 429 GPG 429 GPK 429 GPN Note: Escutcheon trim MUST be used when through bolting the exit device. Sectional trim will conflict with through bolt heads for the device chassis. 154

4200 SERIES EXIT TRIM PART DESCRIPTION PAINTED 689 695 PLATED 605 613 626 630 429 PTD 429 PUN 429 PUK Trim, blank plate, exit only, F01 Trim, pull plate, non-keyed, dummy trim F02 Trim, pull plate, keyed, night latch F03 $54 $72 $54 $72 $62 429 LPENX 429 LPEKF 429 LPEKX 429 LPENF 429 PTF Trim, PHL lever, narrow escutcheon, non-keyed rigid, dummy trim F02 Trim, PHL lever, narrow escutcheon, keyed, classroom F08 Trim, PHL lever, narrow escutcheon, keyed, storeroom F09 Trim, PHL lever, narrow escutcheon, non-keyed, passage F14 Fire plate (630 finish only) $188 $234 $211 $208 $188 $234 $211 $208 $198 $238 $227 $220 $72 $198 $238 $227 $220 $72 $198 $238 $227 $220 $72 $72 429 LPS 429 LPK 429 LPN Trim, PHL lever w/rose, keyed rigid, night latch F03 Trim, PHL lever w/rose, keyed, classroom F08 Trim, PHL lever w/rose, non-keyed, passage F14 $214 $214 $202 $214 $214 $202 $214 $214 $202 429 CQK 429 CQN Trim, knob w/rose, keyed, classroom F08 Trim, knob w/rose, non-keyed, passage F14 $161 $146 $140 $146 $140 $146 $140 429 GPH 429 GPG 429 GPK 429 GPN Trim, grip pull, non-keyed, dummy trim F02 (specify hand) Trim, grip pull, keyed, night latch F03 (specify hand) Trim, grip pull w/thumb piece, keyed, classroom F05 (specify hand) Trim, grip pull w/thumb piece, non-keyed, passage F15 (specify hand) Note: Escutcheon trim MUST be used when through bolting the exit device. Sectional trim will conflict with through bolt heads for the device chassis. HEAVY DUTY EXIT TRIM $186 $193 $219 $217 $186 $193 $219 $217 $202 $236 $265 $254 $254 $262 4200 SERIES EXIT DEVICE PART DESCRIPTION PLATED 626 605/613 429 LPENXH 429 LPEKFH 429 LPEKXH 429 LPENFH 429 LPSH 429 LPSH-IC 429 LPKH 429 LPKH-IC 429 LPNH 429 LPXH Trim, PHL lever, HD wide escutcheon, non-keyed rigid, dummy trim F02 Trim, PHL lever, HD wide escutcheon, keyed, classroom F08 Trim, PHL lever, HD wide escutcheon, keyed, storeroom F09 Trim, PHL lever, HD wide escutcheon, non-keyed, passage F14 Trim, PHL lever HD w/rose, keyed rigid, night latch F03 Trim, PHL lever HD w/rose, keyed IC (less core) rigid, night latch F03 Trim, PHL lever HD w/rose, keyed, classroom F08 Trim, PHL lever HD w/rose, keyed IC (less core), classroom F08 Trim, PHL lever HD w/rose, non-keyed, passage F14 Trim, PHL lever HD w/rose, dummy trim F02 $372 $398 $395 $382 $237 $237 $237 $237 $228 $198 $382 $408 $405 $395 $246 $247 $247 $247 $238 $208 Note: Trim will be furnished with SCC keyway, keyed different unless otherwise stated. See PDQ price list for other available keyways and options. IC trim furnished less core. See PDQ price list for interchangeable cores w/available keyways priced separately. Additional finishes available by special order. Consult the factory. Available 9/07 155

4200 SERIES ACCESSORIES/OPTIONS PART DESCRIPTION PAINTED (689/695/696) PLATED (605/626/630) 429020 429021 429023 429024 429001 Top surface vertical rod for 7 0 door Top surface vertical rod, 1 extension for 8 0 door Top surface vertical rod, 3 extension for up to 10 0 door Bottom surface vertical rod Sex nut and bolt set $31.50 $28.50 $36.50 $28.50 $29.50 $35 $35 $42 $41 4200 SERIES EXIT DEVICE 429002 429003 429004 429005 429006 429014 429017 429018 429019 429150 429036 429043 Lock front filler Strike filler Rim strike w/1 ea. 1/8 shim Top strike w/2 ea. 1/16 shims for surface vertical rod Bottom strike w/2 ea. 1/16 shims for surface vertical rod Trim back plate (2-1/2 x 8 ) Trim back plate (3-1/2 x 8 ) Adapter plate Double door strike Universal Glass Bead Kit Strike Low Profile Rim Dogging Key 4200 EXIT DEVICE DOOR WIDTH CHART $6 $6 $7 $9 $9 $24 $29 $6 $24 $107 $15 $4 PART DESCRIPTION FOR DOOR MIN DOOR MAX CUT PUSH PAD 4200R-0X 4200 Rim Regular dogging 36" 27" 9" 18" 4200RF-0X 4200 Rim Fire 36" 27" 9" 18" 4200V-0X 4200 SVR Regular dogging 36" 27" 9" 18" 4200VF-0X 4200 SVR Fire 36" 27" 9" 18" 4200RA-0X 4200 Rim Regular dogging 48" 39" 9" 30" 4200RFA-0X 4200 Rim Fire 48" 39" 9" 30" 4200VA-0X 4200 SVR Regular dogging 48" 39" 9" 30" 4200VFA-0X 4200 SVR Fire 48" 39" 9" 30" 156 Rev 1 1/18/12

ARCHITECTURAL STYLE AMERICAN EAGLE 4200 NARROW STILE EXIT DEVICE The PDQ/AE 4200 Narrow Stile device has the same features as our very popular 4200 Standard unit, but features a design that will fit on a 2.5" minimum stile width. Designed for use on single or double doors with mullion. Units are non-handed to facilitate easy field installation. The 4200 Series Narrow Stile is available in 689 Aluminum and 695 Dark Bronze Painted Finishes. 4200 SERIES NARROW STILE SPECIFICATIONS CHASSIS: RAIL: TOUCH PAD: Cadmium plated steel Steel Steel LATCH BOLT: STRIKE: PROJECTION: HAND: DOGGING: APPLICATION: STILE WIDTH: DOOR THICKNESS: DOOR WIDTH: DEVICE FINISHES: FASTENERS: CERTIFICATION: WARRANTY: 5/8" deadlatching trigger Stainless Steel / 11/16" latchbolt Stainless Steel Stainless steel with a plated roller 2 7/16" projection, 1 11/16" projection when depressed or dogged / Includes shim for doors prepped w/1/2" stop / Shim not required on 5/8" stop Device and trim are non-handed Hex key dogging standard Rim only 2.5" Minimum stile width 1-3/4 Supplied standard for 3 ft doors. Consult Door Width Chart (page 155) to determine correct device for your application 689 and 695 painted finishes. Supplied with Machine Screws / Sex Nut and Bolts required for wood doors SNB's must be ordered separately UL/ULC listed for Panic Five (5) year limited warranty 4200 SERIES NARROW STILE EXIT DEVICE 157

4200 SERIES NARROW STILE HOW TO ORDER SERIES APPLICATION SIZE TRIM Exit Device Series R Rim 3 ft unit standard A size for 3 2-4 0 door maximum Consult Door Width Chart (Page 155) to determine correct device for your application Specify As Required (Example Shown) 42 02 R A 689 429NGPN 02 Hex Key Dogging (Standard) No Designation Egress (Panic) Labeled 689 Aluminum 695 Duro Bronze NARROW STILE LABELING FINISH EXIT DEVICES 4200 SERIES NARROW STILE EXIT DEVICE PART 4202R 4202RA TRIM SELECTION DESCRIPTION Exit, rim, UL panic listed, hex key dogging, 3 0 door Exit, rim, UL panic listed, hex key dogging, 4 0 door PAINTED (689/695) $312 $346 ANSI FUNCTION DESCRIPTION HEAVY DUTY WIDE ESCUTCHEON TRIM HEAVY DUTY KEY-IN-LEVER ROSE TRIM PHL- PHILADELPHIA HEAVY DUTY KEY-IN-LEVER ROSE TRIM BSN-BOSTON HEAVY DUTY KEY-IN-LEVER ROSE TRIM MIA-MIAMI GRIP PULL/THUMB PIECE* 02 Entrance by trim when actuating bar is locked down (dummy trim). 429 NGPH 03 Entrance by trim when latch bolt is retracted by key. Key removable only when locked (night latch). 429 NGPG Note: *429NGPG furnished with 1-1/4 mortise cylinder with rim tail piece 158

4200 SERIES NARROW STILE TRIM OPTIONS 429NGPH 429NGPG 429N004 EXIT TRIM PART 429NGPH 429NGPG DESCRIPTION Trim, grip pull Trim, grip pull w/thumb piece, keyed, classroom F05 -PLATED 605 606 613 626 630 $224 $373 Note: Trim will be furnished with SCC keyway, keyed different unless otherwise stated. See PDQ price list for other available keyways and options. IC trim furnished less core. See PDQ price list for interchangeable cores with available keyways priced separately. ACCESSORIES/OPTIONS PART 429N001 429N015 429N016 429N004 429N019 DESCRIPTION Sex nut and bolt set (specify US3, US26D or US4) Shim, end cap, glass lite shim 1/4 Shim, chassis, glass lite shim 1/4 Strike and Shim Kit Double door strike $28 $17 $50 $24 $21 4200 SERIES NARROW STILE EXIT DEVICE 4202 NARROW STILE EXIT DEVICE DOOR WIDTH CHART PART DESCRIPTION FOR DOOR MIN DOOR MAX CUT PUSH PAD 4202R-0X 4202 Rim Regular dogging 36" 30" 6" 21" 4202RA-0X 4202 Rim Regular dogging 48" 34" 14" 25" 159

ARCHITECTURAL STYLE AMERICAN EAGLE 6200 COMMERCIAL SERIES EXIT DEVICE SPECIFICATIONS CHASSIS: RAIL: TOUCH PAD: LATCH BOLT: The American Eagle 6200 Series offers superior durability and security in commercial applications while providing compliance with life safety and fire code requirements. The 6200 Series is ideal for stocking distributors as the exit device is universal. The function is easily determined by selecting from the extensive line of available trim options. Units are non-handed to facilitate easy field installation. The 6200 is available in a variety of architectural finishes that will compliment any decor. Cadmium plated steel Extruded aluminum Stainless steel Stainless steel dead locking / 3/4 throw Rim / 5/8 throw SVR 6200 SERIES STRIKE: PROJECTION: HAND: DOGGING: APPLICATION: STILE WIDTH: DOOR THICKNESS: DOOR WIDTH: DEVICE FINISHES: FASTENERS: CERTIFICATION: WARRANTY: Supplied standard for 161 prep with 5/8" stop and standard door gap of 1/8" only 3-1/8 projection / 2-5/8 projection when dogged Device and trim are non-handed Hex key dogging standard / Cylinder dogging optional / No dogging on fire labeled devices Available in Rim, Surface or Concealed Vertical Rod 4-1/4 minimum 1-3/4 Supplied standard for 3 ft doors. Consult Door Width Chart (page 162) to determine correct device for your application Polished brass, satin brass, oil rubbed bronze, satin chrome and satin stainless steel / Optional Antimicrobial Coating Sex nuts and bolts standard UL/ULC listed for Panic, Fire Exit Hardware labeled for up to 3 hours for 4 0 x 8 0 maximum single, 8 0 x 8 0 maximum pairs / Complies with UL 10C and UBC 7.2 (1997) / Certified to ANSI/BHMA A156.3-2001 Grade 1 / Complies with U.L. 10C and UBC 7.2 (1997) Ten (10) year limited warranty 6200 SERIES EXIT DEVICE 161

6200 SERIES HOW TO ORDER SERIES APPLICATION SIZE LBR TRIM 3 ft unit standard A for doors up to 48" 3 Electrified Units cannot be cut down Consult Door Width Chart (Page 162) to determine correct device for your application Exit Device Series R Rim V Surface Vertical Rod CV Concealed Vertical Rod Leave Blank If Rim Or If Ordering Both Rods Specify As Required (Example Shown) 62 00 * R F A AL LBR 630 629LPKH 00 Hex Key Dogging (Standard) 01 Cylinder Dogging * Dogging Not Furnished With Fire Labeled Devices F Fire Labeled No Designation Egress (Panic) Labeled AL - Alarm Option ED - Electric Dogging EL - Electrical Latch Retraction SS - Signal Switch ALSS - Alarm Option / Signal Switch EDSS - Electric Dogging / Signal Switch ELSS - Electrical Latch Retraction / Signal Switch 605 Polished Brass 606 Satin Brass 613 Oil Rubbed Bronze 626 Satin Chrome 630 Satin Stainless Steel DOGGING LABELING OPTIONS FINISH NOTE: Rim Case quantity is 4 / 3 Case weight is 55 lbs. / 4 Case weight is 61 lbs. Vertical Case quantity is 4 / 3 Case weight is 76 lbs. / 4 Case weight is 82 lbs. EXIT DEVICES PART DESCRIPTION PLATED 630 626 605/606/613 6200 SERIES EXIT DEVICE 6200R 6200RA 6200RF 6200RFA 6200V 6200VA 6200CV 6200CVA 6200CVF 6200CVFA 6200VF 6200VFA 6200VF LBR 6200VFA LBR 6201R 6201RA 6201V 6201VA Exit, rim, UL panic listed, hex key dogging, 3 0 door Exit, rim, UL panic listed, hex key dogging, 4 0 door Exit, rim, UL fire listed, no dogging, 3 0 door Exit, rim, UL fire listed, no dogging, 4 0 door Exit, surface vertical rod, UL panic listed, hex key dogging, 3 0 door Exit, surface vertical rod, UL panic listed, hex key dogging, 4 0 door Exit, concealed vertical rod, UL fire listed, no dogging, 3 0 door Exit, concealed vertical rod, UL fire listed, no dogging, 4 0 door Exit, concealed vertical rod, UL panic listed, hex key dogging, 3 0 door Exit, concealed vertical rod, UL panic listed, hex key dogging, 4 0 door Exit, surface vertical rod, UL fire listed, no dogging, 3 0 door Exit, surface vertical rod, UL fire listed, no dogging, 4 0 door Exit, surface vertical rod, less bottom rod, UL fire listed, no dogging, 3 0 door Exit, surface vertical rod, less bottom rod, UL fire listed, no dogging, 4 0 door Exit, rim, UL panic listed, cylinder dogging, 3 0 door Exit, rim, UL panic listed, cylinder dogging, 4 0 door Exit, surface vertical rod, UL panic listed, cylinder dogging, 3 0 door Exit, surface vertical rod, UL panic listed, cylinder dogging, 4 0 door $900 $930 $1026 $1078 $1278 $1345 $1400 $1470 $1488 $1558 $1364 $1437 $1364 $1437 $1006 $1058 $1300 $1350 $905 $955 $1032 $1082 $1281 $1345 $1408 $1478 $1496 $1566 $1371 $1444 $1371 $1444 $1013 $1065 $1341 $1414 $980 $1010 $1109 $1162 $1350 $1430 $1482 $1552 $1570 $1640 $1448 $1521 $1448 $1521 $1104 $1142 $1417 $1490 LOW PROFILE STRIKE IS SUPPLIED STANDARD AND REQUIRED FOR USE IN 161 PREP. ORDER P/N 629036 IN ADDITION TO YOUR RIM DEVICE. 162 Rev 1 1/18/12

6200 SERIES TRIM SELECTION ANSI FUNCTION DESCRIPTION HEAVY DUTY WIDE ESCUTCHEON TRIM* HEAVY DUTY KEY-IN-LEVER ROSE TRIM PHL-PHILADELPHIA HEAVY DUTY KEY-IN-LEVER ROSE TRIM BSN-BOSTON HEAVY DUTY KEY-IN-LEVER ROSE TRIM MIA-MIAMI EXTRA HEAVY DUTY FREE WHEELING TRIM** 01 Exit only, no trim or blank escutcheon. 02 Entrance by trim when actuating bar is locked down (dummy trim). 629 LPENXH 629 LPENXEH-07 03 Entrance by trim when latch bolt is retracted by key. Key removableonly when locked (night latch). 629 LPEKXH 629 LPSH/ 629 LPSH-IC 629 LBSH/ 629 LBSH-IC 629 LMSH/ 629 LMSH-IC 629 LPEKXEH-07 04 Entrance by trim when latch bolt is retracted by key or set in retracted position by key (night latch with cylinder dogging). Requires 6201 device with cylinder dogging. 629 LPEKXH 629 LPSH/ 629 LPSH-IC 629 LBSH/ 629 LBSH-IC 629 LMSH/ 629 LMSH-IC 629 LPEKXEH-07 08 Entrance by knob or lever. Key unlocks knob or lever (classroom knob/lever). 629 LPEKFH 629 LPKH/ 629 LPKH-IC 629 LBKH/ 629 LBKH-IC 629 LMKH/ 629 LMKH-IC 629 LPEKXEH-07 14 Entrance by trim when latch bolt is released by knob or lever. Always active, no cylinder (passage knob/lever). 629 LPENFH Note: *629 LPE trim furnished with 1-1/8 mortise cylinder (will not work with 1-1/4 cylinder) **Required for CV and CVA Trim 629 LPNH 629 LBNH 629 LMNH 6200 SERIES EXIT DEVICE 163

6200 SERIES TRIM OPTIONS 629 LPENFH 629 LPENFH 629 LPENXH* 629 LPENXH* 629 LPKH/629 LPSH 629 LPNH 629 LPKH-IC/629 LPSH-IC 629 LBKH/629 LBSH 629 LBNH 629 LBKH-IC/629 LBSH-IC 629 LMKH/629 LMSH 629 LMNH 629 LMNH 629 LMKH-IC/629 LMSH-IC 629 GPG 629 GPK 629 GPN 629 GPH 629 PTD 629 PUN 629 PUK *While the EH trim is optional for our Vertical Rod and Rim devices, it is mandatory for CV and CVF concealed vertical rod devices, see page 161 6200 SERIES EXIT DEVICE ANTIMICROBIAL COATING DESCRIPTION Exit Trim Includes Lever and Escutcheon as well as Inside push pad Maximum discount 50%. Extended lead times apply. Contact factory. $62.00 Note: Please place antimicrobial coated orders separately, and allow 30 days for manufacturing. For additional product finishes or styles, please contact PDQ. 164

6200 SERIES EXIT TRIM PART 629 PTD 629 PUN 629 PUK 629 LPENXH 629 LPEKXH 629 LPEKFH 629 LPENFH 629 LPEKXEH-07 629 LPENFEH-07 629 LPEKFEH-07 629 LPENXEH-07 629 LPSH 629 LPSH-IC 629 LPKH 629 LPKH-IC 629 LPNH 629LPXH 629 LBSH 629 LBSH-IC 629 LBKH 629 LBKH-IC 629 LBNH 629LBXH 629 LMSH 629 LMSH-IC 629 LMKH 629 LMKH-IC 629 LMNH 629LMXH 629 GPG 629 GPK 629 GPN 629 GPH DESCRIPTION Trim, blank plate, exit only, F01 Trim, pull plate, non-keyed, dummy trim F02 Trim, pull plate, keyed, night latch F03 Trim, PHL lever, wide escutcheon, non-keyed rigid, dummy trim F02 Trim, PHL lever, wide escutcheon, keyed rigid, night latch F03/04 Trim, PHL lever, wide escutcheon, keyed, classroom F08 Trim, PHL lever, wide escutcheon, non-keyed, passage F14 Exra Heavy Duty Trim, PHL lever, wide escutcheon, keyed rigid, night latch F03/04 Exra Heavy Duty Trim, PHL lever, wide escutcheon, non-keyed, passage F14 Exra Heavy Duty Trim, PHL lever, wide escutcheon, keyed, classroom F08 Exra Heavy Duty Trim, PHL lever, wide escutcheon, non-keyed rigid, dummy trim F02 Trim, PHL lever HD w/rose, keyed rigid, night latch F03/04 Trim, PHL lever HD w/rose, keyed IC (less core) rigid, night latch F03/04 Trim, PHL lever HD w/rose, keyed, classroom F08 Trim, PHL lever HD w/rose, keyed IC (less core), classroom F08 Trim, PHL lever HD w/rose, non-keyed, passage F14 Trim, PHL lever HD w/rose, dummy trim F02 Trim, BSN lever HD w/rose, keyed rigid, night latch F03/04 Trim, BSN lever HD w/rose, keyed IC (less core) rigid, night latch F03/04 Trim, BSN lever HD w/rose, keyed, classroom F08 Trim, BSN lever HD w/rose, keyed IC (less core), classroom F08 Trim, BSN lever HD w/rose, non-keyed, passage F14 Trim, BSN lever HD w/rose, dummy trim F02 Trim, MIA lever HD w/rose, keyed rigid, night latch F03/04 Trim, MIA lever HD w/rose, keyed IC (less core) rigid, night latch F03/04 Trim, MIA lever HD w/rose, keyed, classroom F08 Trim, MIA lever HD w/rose, keyed IC (less core), classroom F08 Trim, MIA lever HD w/rose, non-keyed, passage F14 Trim, MIA lever HD w/rose, dummy trim F02 Trim, grip pull, keyed, night latch F03 (specify hand) Trim, grip pull w/thumb piece, keyed, classroom F05 Trim, grip pull w/thumb piece, non-keyed, passage F15 629 GPH Trim, grip pull dummy trim F02 -PLATED 605 606 613 626 630 Note: Trim will be furnished with SCC keyway, keyed different unless otherwise stated. See PDQ price list for other available keyways and options. IC trim furnished less core. See PDQ price list for interchangeable cores with available keyways priced separately. $33 $126 $318 $378 $387 $321 $322 $322 $330 $330 $320 $320 $322 $322 $330 $330 $320 $320 $322 $322 $330 $330 $320 $320 $33 $126 $318 $378 $387 $321 $322 $322 $330 $330 $320 $320 $322 $322 $330 $330 $320 $320 $322 $322 $330 $330 $320 $320 $318 $378 $387 $321 $322 $322 $330 $330 $320 $320 $322 $322 $330 $330 $320 $320 $322 $322 $330 $330 $320 $320 $314 $366 $378 $316 $450 $450 $535 $535 $314 $314 $321 $321 $320 $320 $314 $314 $321 $321 $320 $320 $314 $314 $321 $321 $320 $320 $39 $314 $366 $378 $316 $259 $450 $372 $344 6200 SERIES EXIT DEVICE 165

6200 SERIES ACCESSORIES/OPTIONS PART 629020 629023 629024 629027 629001 629011 629012 629019 6290121 629013 6290130 6290131 6290132 629036 6290150 DESCRIPTION Top surface vertical rod for 8 0 door Top surface vertical rod, 2 extension for up to 10 0 door Bottom surface vertical rod Rod guide Sex Nut and Bolts Set (Specify Color) Latch Top SVR Non Fire Strike, Rim Panic Roller Strike Double Door Strike, Rim Fire Strike, SVR Bottom Panic Roller Strike, SVR Top Panic Roller Strike, Bottom Fire Strike, SVR Top Fire Strike, Low Profile Rim Low profile strike supplied standard for 161 prep with 5/8" stop and 1/8" standard gap Glass Bead Kit ¼ Universal PLATED (605/606/613/626/630) $27 $26 $26 $8 $30 $104 $18 $45 $28 $22 $20 $20 $18 $25 $107 6200 SERIES EXIT DEVICE 6200 EXIT DEVICE DOOR WIDTH CHART PART DESCRIPTION FOR DOOR MIN DOOR MAX CUT PUSH PAD 6201R/6202R 6200 Rim Cylinder dogging 36" 30" 6" 18" 6200R/6202R 6200 Rim Regular dogging 36" 30" 6" 18" 6200RF/6202RF 6200 Rim Fire 36" 27" 9" 18" 6201V 6200 SVR Cylinder dogging 36" 30" 6" 18" 6200V 6200 SVR Regular dogging 36" 30" 6" 18" 6200VF 6200 SVR Fire 36" 27" 9" 18" 6200CV 6200 SVR Regular dogging 36" 30" 6" 18" 6200CVF 6200 SVR Fire 36" 27" 9" 18" 6201RA 6200 Rim Cylinder dogging 48" 35" 13" 22" 6200RA/6202RA 6200 Rim Regular dogging 48" 34" 14" 22" 6200RFA/6202RFA 6200 Rim Fire 48" 33" 15" 22" 6201VA 6200 SVR Cylinder dogging 48" 35" 13" 22" 6200VA 6200 SVR Regular dogging 48" 34" 14" 22" 6200VFA 6200 SVR Fire 48" 33" 15" 22" 6200R EL 6200 Rim Electric Latch 36" 36" 0" 18" CROSS REFERENCE AMERICAN EAGLE CAL ROYAL CORBIN/ RUSSWIN DORMA HAGER MONARCH YALE SARGENT PRECISION S. PARKER VON DUPRIN TELL 6200 9800 ED5000 9000 4500 18 7000 8000 2100 525 99/98 9000 No products are exactly alike. This cross reference represents our judgement of products that are most similar. Information has been obtained from trade sources. It is not represented nor guaranteed that any product exactly equals any other product. 166

ARCHITECTURAL STYLE AMERICAN EAGLE 6200 NARROW STILE EXIT DEVICE SPECIFICATIONS CHASSIS: RAIL: TOUCH PAD: LATCH BOLT: The PDQ/AE 6202 Series Narrow stile Panic and Fire Rated Exit Hardware is designed for use on contemporary glass doors in public buildings, resort hotels, stores, and all types of applications where narrow stile aluminum framing is used. Available in 613 and 630. Cadmium plated steel Extruded aluminum Stainless steel Stainless steel dead locking / 3/4" throw Rim 6200 SERIES NARROW STILE STRIKE: PROJECTION: HAND: DOGGING: APPLICATION: STILE WIDTH: DOOR THICKNESS: DOOR WIDTH: DEVICE FINISHES: FASTENERS: CERTIFICATION: WARRANTY: 629012 Standard strike / 6290121 Standard strike for Fire Rated Device 3-1/8" projection / 2-5/8" projection when dogged Device and trim are non-handed Hex Key Dogging Standard / No dogging available on Fire Rated Devices Rim and Rim Fire Rated Minimum 2 19/32" 1-3/4 Supplied standard for 3 ft doors. Consult Door Width Chart (page 166) to determine correct device for your application Satin Stainless steel and oil rubbed bronze Machine Screws furnished standard / Optional SNB ordered separately / Fire labeld Device comes standard with SNB UL/ULC listed for Panic, Fire Exit Hardware labeled for up to 3 hours for 4 0 x 8 0 maximum single, 8 0 x 8 0 maximum pairs / Complies with UL 10C and UBC 7.2 (1997) Ten (10) year limited warranty 6200 SERIES NARROW STILE EXIT DEVICE 167

6200 SERIES NARROW STILE HOW TO ORDER SERIES APPLICATION SIZE TRIM 3 ft unit standard A for doors up to 48" Exit Device Series R Rim Consult Door Width Chart (page 166) to determine correct device for your application Specify As Required (Example Shown) 62 02 R F A 630 629NGPH 02 Hex Key Dogging (Standard) Dogging Not Furnished With Fire Labeled Devices F Fire Labeled No Designation Egress (Panic) Labeled 613 Oil Rubbed Bronze 630 Satin Stainless Steel DOGGING LABELING FINISH EXIT DEVICES PART DESCRIPTION PLATED 630 613 6202R 6202RA Exit, rim, UL panic listed, hex key dogging, 3 0 door Exit, rim, UL panic listed, hex key dogging, 4 0 door $893 $943 $904 $954 6200 SERIES NARROW STILE EXIT DEVICE 6202RF 6202RFA Exit, rim, UL fire listed, no dogging, 3 0 door Exit, rim, UL fire listed, no dogging, 4 0 door $893 $943 $904 $954 168

6200 SERIES NARROW STILE TRIM SELECTION ANSI FUNCTION DESCRIPTION HEAVY DUTY WIDE ESCUTCHEON TRIM HEAVY DUTY KEY-IN-LEVER ROSE TRIM PHL- PHILADELPHIA HEAVY DUTY KEY-IN-LEVER ROSE TRIM BSN-BOSTON HEAVY DUTY KEY-IN-LEVER ROSE TRIM MIA-MIAMI GRIP PULL/THUMB PIECE 02 Entrance by trim when actuating bar is locked down (dummy trim). 629NGPH 03 Entrance by trim when latch bolt is retracted by key. Key removable only when locked (night latch). 629NGPG TRIM OPTIONS 629NGPH 629NGPG 629N019 EXIT TRIM PART DESCRIPTION -PLATED 605 606 613 626 630 629NGPH 629NGPG Trim, grip pull Trim, grip pull w/cylinder, Storeroom function F07 $240 $380 Note: Trim will be furnished with SCC keyway, keyed different unless otherwise stated. See PDQ price list for other available keyways and options. IC trim furnished less core. See PDQ price list for interchangeable cores with available keyways priced separately. 6200 SERIES NARROW STILE EXIT DEVICE 169

6200 SERIES NARROW STILE ACCESSORIES/OPTIONS PART DESCRIPTION 629N001 629N015 629N016 629012 6290121 629019 Sex nut and bolt set (specify US3, US26D or US4) Shim, end cap, glass lite shim 1/4 Shim, chassis, glass lite shim 1/4 Strike, rim non-fire labeled Standard strike for Fire Rated device Double door strike $27.50 $29.70 $74.00 $15.20 $28.00 $31.00 6202 NARROW STILE EXIT DEVICE DOOR WIDTH CHART PART DESCRIPTION FOR DOOR MIN DOOR MAX CUT PUSH PAD 6202R-0X 6202 Rim Regular dogging 36" 30" 6" 18" 6202RF-0X 6202 Rim Fire 36" 27" 9" 18" 6202RA-0X 6202 Rim Regular dogging 48" 34" 14" 22" 6202RFA-0X 6202 Rim Fire 48" 33" 15" 22" 6200 SERIES NARROW STILE EXIT DEVICE CROSS REFERENCE AMERICAN EAGLE CAL ROYAL CORBIN/ RUSSWIN DORMA HAGER MONARCH YALE 6202 NA ED4000 5000 NA 17 7200 SARGENT PRECISION S. PARKER VON DUPRIN 8500 2400 550 33/35 TELL NA No products are exactly alike. This cross reference represents our judgement of products that are most similar. Information has been obtained from trade sources. It is not represented nor guaranteed that any product exactly equals any other product. 170

PDQ/AMERICAN EAGLE 9200 SERIES MULLIONS SPECIFICATIONS TUBE DIMENSIONS: SIZE: COLOR: CERTIFICATION: WARRANTY: The PDQ/AE 9000 series keyed removeable mullions are for use with our 4200 and 6200 series Rim Exit Devices on non fire or fire rated pairs of doors. They are designed for quick removal from the top bracket by a simple operation of the rim cylinder when a clear, unobstructed large opening is required. Once the mullion is removed, carts, gurneys, large machinery and the like can freely pass through the opening. When the mullion is re-installed, the unit will self lock in place without the need for the key. Each keyed removable mullion set includes top and bottom bracket set, mullion tube, and shims. Rim Cylinder is sold separately. 2 W x 3 D / 1/8 wall thickness / 11 Guage steel tube 8 and 10 sizes available in Fire and Non-Fire Rated styles Gray Powder Coating UL Rated by UL 10B / 10C standard One (1) year limited warranty MULLION MULLIONS - KEY REMOVABLE PART DESCRIPTION 9200M-11 9200MA-11 9200MF-11 9200MFA-11 Mullion, 8 non-fire rated Mullion, 10 non-fire rated Mullion, 8 fire rated Mullion, 10 fire rated $833 $896 $1060 $1150 MULLIONS EXIT DEVICE 171

MULLIONS REPLACEMENT PARTS MULLION STRIKE KIT-929012F REPLACEMENT PARTS PART DESCRIPTION 929012F Mullion Fire Strike $54 Note: Strike sold as replacement only. Must provide Order number of previous purchased item. MULLIONS EXIT DEVICE 172

THIS PAGE LEFT BLANK INTENTIONALLY

PDQ HINGES PDQ wants to be your total one source supplier of contract hardware materials. The introduction of a high quality hinge is another step in this direction. PDQ hinges are available in several finishes including, 626, 605, and 630. Available in plain bearing, ball bearing and heavy duty, these hinges are independently tested and meet ANSI/BHMA A156.1-2000, based on grade of hinge. Our spring hinges are UL listed. HINGES COMMERCIAL HINGES PDQ HINGE SPECIFICATIONS CERTIFICATION: PDQ hinges meet the requirements of ANSI/BHMA A156.1 Section 4.1. All PDQ hinges have a base material of Wrought Steel, Stainless Steel, or Wrought Brass. Since each material has different characteristics it is essential that the correct hinge be used in each application. PDQ Hinges are Cycle tested in accordance with ANSI/BHMA A156.1-2000 for one of the following Grades: Grade 1, Heavy Weight Ball Bearing Hinge (HB) for 2,500,000 cycles Grade 2, Ball Bearing Hinge (BB) for 1,500,000 cycles Grade 3, Plain Bearing Hinge (PL) for 350,000 cycles WARRANTY: Five (5) year limited warranty METICULOUSLY MANUFACTURED, THE PDQ HINGE IS AVAILABLE IN 3 BASE METALS: STEEL Wrought Steel is durable yet corrosive. Best if used on interior applications where temperature and humidity are controlled. Steel ball bearing hinges may be used on fire rated openings. BRASS Wrought Brass is rust resistant and decorative. Apply brass hinges where appearance is of great concern yet humidity is also a factor. Brass hinges may not be used on fire rated openings. STAINLESS STEEL Stainless Steel Types 302/304 is rust resistant, durable and decorative. Apply stainless hinges on highly corrosive areas such as chemical storage, seacoast, or industrial areas where acids or atmospheric conditions exist. Stainless steel ball bearing hinges SCREWS All hinges include AMS (All Machine Screws) and AWS (All Wood Screws). AMS (All Machine Screws) AWS (All Wood Screws) 173 Rev 1 1/18/12

HINGES COMMERCIAL HINGES HINGES STOCK HINGE DETAILS & ANSI CROSS REFERENCE PDQ HINGE MODEL ANSI NUMBER STYLE SIZE FREQUENCY WEIGHT THICKNESS SWAGING BASE MATERIAL OPTIONS FULL MORTISE HINGES 35STPL-4040-00 A8184 PL 4.0 x 4.0 LOW STANDARD.130+-.005 2 LEAVES STEEL - 600 (P) $4.50 35STPL-4040-07 A8183 PL 4.0 x 4.0 LOW STANDARD.130+-.005 2 LEAVES STEEL - 652 (26D) $4.50 35STPL-4545-00 A8133 PL 4.5 x 4.5 LOW STANDARD.130+-.005 2 LEAVES STEEL - 600 (P) $4.50 35STPL-4545-07 A8133 PL 4.5 x 4.5 LOW STANDARD.130+-.005 2 LEAVES STEEL - 652 (26D) $4.50 35STPL-4545-05 A8133 PL 4.5 x 4.5 LOW STANDARD.130+-.005 2 LEAVES STEEL - 632 (3) $4.50 35STPL-4545-06 A8133 PL 4.5 x 4.5 LOW STANDARD.130+-.005 2 LEAVES STEEL - 640 (10B) $4.50 35STPL-4545-07NRP A8133NRP PL 4.5 x 4.5 LOW STANDARD.130+-.005 2 LEAVES STEEL NRP 652 (26D) $5.50 35STBB-4545-00 A8112 BB 4.5 x 4.5 MEDIUM STANDARD.134+-.005 2 LEAVES STEEL - 600 (P) $8.20 35STBB-4545-07 A8112 BB 4.5 x 4.5 MEDIUM STANDARD.134+-.005 2 LEAVES STEEL - 652 (26D) $8.20 35STBB-4545-05 A8112 BB 4.5 x 4.5 MEDIUM STANDARD.134+-.005 2 LEAVES STEEL - 632 (3) $8.20 35STBB-4545-06 A8112 BB 4.5 x 4.5 MEDIUM STANDARD.134+-.005 2 LEAVES STEEL - 640 (10B) $8.20 35STBB-4545-07NRP A8112NRP BB 4.5 x 4.5 MEDIUM STANDARD.134+-.005 2 LEAVES STEEL NRP 652 (26D) $9.20 35BRBB-4545-07 A2112 BB 4.5 x 4.5 MEDIUM STANDARD.134+-.005 2 LEAVES BRASS - 652 (26D) $17.95 35BRBB-4545-07NRP A2112NRP BB 4.5 x 4.5 MEDIUM STANDARD.134+-.005 2 LEAVES BRASS NRP 652 (26D) $18.95 35SSBB-4540-01 A5112 BB 4.5 x 4.0 MEDIUM STANDARD.134+-.005 2 LEAVES STAINLESS STEEL 35SSBB-4545-01 A5112 BB 4.5 x 4.5 MEDIUM STANDARD.134+-.005 2 LEAVES STAINLESS STEEL 35SSBB-4545-01NRP A5112NRP BB 4.5 x 4.5 MEDIUM STANDARD.134+-.005 2 LEAVES STAINLESS STEEL FINISH LIST PRICE - 630 (32D) $20.85-630 (32D) $20.85 NRP 630 (32D) $21.85 35STHB-4545-00 A8111 HB 4.5 x 4.5 HIGH HEAVY.180+-.005 2 LEAVES STEEL - 600 (P) $20.85 35STHB-4545-07 A8111 HB 4.5 x 4.5 HIGH HEAVY.180+-.005 2 LEAVES STEEL - 652 (26D) $20.85 35STHB-4545-05 A8111 HB 4.5 x 4.5 HIGH HEAVY.180+-.005 2 LEAVES STEEL - 632 (3) $20.85 35STHB-4545-06 A8111 HB 4.5 x 4.5 HIGH HEAVY.180+-.005 2 LEAVES STEEL - 640 (10B) $20.85 35STHB-4545-07NRP A8111NRP HB 4.5 x 4.5 HIGH HEAVY.180+-.005 2 LEAVES STEEL NRP 652 (26D) $21.85 35SSHB-4545-01 A5111 HB 4.5 x 4.5 HIGH HEAVY.180+-.005 2 LEAVES STAINLESS STEEL 35SSHB-4545-01NRP A5111NRP HB 4.5 x 4.5 HIGH HEAVY.180+-.005 2 LEAVES STAINLESS STEEL SPRING HINGES - 630 (32D) $20.85 NRP 630 (32D) $21.85 35STSH-4545-07 K8107-1F SH 4.5 x 4.5 MEDIUM STANDARD.130+-.005 2 LEAVES STEEL - 652 (26D) $14.50 Please check our Electro Mechanical brochure for electrified hinges 174 Rev 1 1/18/12

HINGES CROSS REFERENCE HINGES COMMERCIAL HINGES HINGE DESCRIPTION PDQ ANSI BOMMER HAGER MCKINNEY PBB STANLEY Plain Bearing Steel 35STPL A8133 5000 1279 T2714 PB81 F179 Ball Bearing Steel 35STBB A8112 BB5000 BB1279 TA2714 BB81 FBB179 Ball Bearing Brass 35BRBB A2112 BB5001 BB1191 TA2314 BB21 FBB191 Ball Bearing Stainless 35SSBB S5112 BB5002 BB1191 (630/32D) TA2314 (630/32D) BB51 FBB191 (630/32D) Ball Bearing, Heavy Weight Steel 35STHB A8111 BB5004 BB1168 T4A3786 HB81 FBB168 Ball Bearing, Heavy Weight Stainless 35SSHB A5111 BB5006 BB1199 T4A3386 HB51 FBB199 Spring Hinge, Self Closing Steel 35STSH K8107-1F LB4310C 1250 1502 SP81 2060R HOW TO ORDER QUANTITY PART NUMBER ITEM FINISH LIST 125 STPB 4545 07 4.5 X 4.5 Plain Bearing Steel hinges 626 8.20 NOTE: See chart on previous page for stock items. Other sizes and styles are available by special order. Consult factory for details. 175

THIS PAGE LEFT BLANK INTENTIONALLY

THIS PAGE LEFT BLANK INTENTIONALLY

PDQ/AMERICAN EAGLE ELECTRO MECHANICAL HARDWARE PDQ has expanding its product offering to include a variety of electrified mortise and cylindrical locks along with electric strikes, power supplies and the necessary accessories needed to install these items in conjunction with a Fire Alarm, Burglar Alarm or Access Control System. ELECTROMECHANICAL HDW INTRODUCTION 177

ELECTROMECHANICAL HDW ELECTRIFIED MORTISE LOCKS ELECTROMECHANICAL HARDWARE ELECTRIFIED MORTISE LOCKS MR 199 ELECTRIFIED HOW TO ORDER MR SECURITY OPTIONS SWITCH OPTIONS KEYING FS Fail Safe/Power Lock FSC Fail Secure/Power Unlock Blank REX for Request to Exit SCC Schlage C IC Interchangeable Core Other Consult Catalog J199 7 FS 24V 1-3/4 SCC RH Color 7 = 26D Other Consult Catalog 12V 12 VAC/VDC 24V 24 VAC/VDC 1-3/4 2-1/4 Other Consult Factory RH Right Hand RHR Right Hand Reverse LH Left Hand LHR Right Hand Reverse COLOR VOLTAGE DOOR THICKNESS DOOR HANDING 178

ELECTROMECHANICAL HARDWARE ELECTRIFIED MORTISE LOCKS MORTISE LOCKSETS F TRIM SECTIONAL PFSF, BFSF, MFSF ESCUTCHEON PFEF, BFEF, MFEF ANSI PDQ 605/606 605/606 NO. NO. FUNCTIONS 626 612/613/625 626 612/613/625 NON-DEADBOLT ELECTROMECHANICAL HDW ELECTRIFIED MORTISE LOCKS 199 Electrified $956 $968 $980 $996 MORTISE LOCKSETS J TRIM SECTIONAL PJSJ, CJSJ, TJSJ, DJSJ ESCUTCHEON PJEJ,CJEJ,TJEJ,DJEJ ANSI PDQ NO. NO. FUNCTIONS 630 630 NON-DEADBOLT 199 Electrified $936 $960 MORTISE LOCKSETS W TRIM SECTIONAL DWSW,BWSW ESCUTCHEON DWEW,BWEW ANSI PDQ NO. NO. FUNCTIONS 630 630 NON-DEADBOLT 199 Electrified $956 $980 OPTIONS DESCRIPTION Request to Exit (REX) $320 179

ELECTROMECHANICAL HDW ELECTRIFIED CYLINDRICAL LOCKS ELECTROMECHANICAL HARDWARE ELECTRIFIED CYLINDRICAL LOCKS GT SERIES SPIRIT PHILADELPHIA (PHL) LEVER HOW TO ORDER GT SERIES SPIRIT MIAMI (MIA) LEVER Straight Lever No Return GT SERIES SPIRIT BOSTON (BSN) LEVER GT SECURITY OPTIONS SWITCH OPTIONS STRIKE FS Fail Safe/Power Lock FSC Fail Secure/Power Unlock Blank REX for Request to Exit ASA FL Full Lip T NA199 7 FS 24V 2-3/4 ASA SCC Color 7 = 26D Other Consult Catalog 12V 12 VAC/VDC 24V 24 VAC/VDC 2-3/4 Only SCC Schlage C IC Interchangeable Core Other Consult Catalog COLOR VOLTAGE DOOR THICKNESS KEYING GT199 LOCKSET ANSI PDQ 605/606/612 NO. NO. FUNCTIONS 626 613/621/625 SINGLE CYLINDER 199 Electrified $660 $666 OPTIONS DESCRIPTION Request to Exit (REX) $200 180

ELECTROMECHANICAL HARDWARE ELECTRIFIED EXIT DEVICES ELECTROMECHANICAL HDW ELECTRIFIED EXIT DEVICES 6200 SERIES ELECTRIC HOW TO ORDER SERIES APPLICATION SIZE LBR TRIM Exit Device Series R Rim V Surface Vertical Rod 3 ft unit standard A for doors up to 48" 3 Electrified Units cannot be cut down Consult Door Width Chart (page 162) to determine correct device for your application Leave Blank If Rim Or If Ordering Both Rods Specify As Required (Example Shown) 62 00 * R F A AL LBR 630 629LPKH 00 Hex Key Dogging (Standard) 01 Cylinder Dogging * Dogging Not Furnished With Fire Labeled Devices F Fire Labeled No Designation Egress (Panic) Labeled AL - Alarm Option ED - Electric Dogging EL - Electrical Latch Retraction SS - Signal Switch (Push Bar Monitor Switch) ALSS - Alarm Option / Signal Switch EDSS - Electric Dogging / Signal Switch ELSS - Electrical Latch Retraction / Signal Switch 605 Polished Brass 606 Satin Brass 613 Oil Rubbed Bronze 626 Satin Chrome 630 Satin Stainless Steel DOGGING LABELING OPTIONS FINISH Refer to Page 162 for cut down information. NOTE: Rim Case quantity is 4 / 3 Case weight is 55 lbs. / 4 Case weight is 61 lbs. Vertical Case quantity is 4 / 3 Case weight is 76 lbs. / 4 Case weight is 82 lbs. 181

ELECTROMECHANICAL HDW ELECTRIFIED EXIT DEVICES ELECTROMECHANICAL HARDWARE ELECTRIFIED EXIT DEVICES PART 6200R 6200RA 6200RF 6200RFA 6200V 6200VA 6200CV 6200CVA 6200CVF 6200CVFA 6200VF 6200VFA 6200VF LBR 6200VFA LBR 6201R 6201RA 6201V 6201VA DESCRIPTION Exit, rim, UL panic listed, hex key dogging, 3 0 door Exit, rim, UL panic listed, hex key dogging, 4 0 door Exit, rim, UL fire listed, no dogging, 3 0 door Exit, rim, UL fire listed, no dogging, 4 0 door Exit, surface vertical rod, UL panic listed, hex key dogging, 3 0 door Exit, surface vertical rod, UL panic listed, hex key dogging, 4 0 door Exit, concealed vertical rod, UL fire listed, no dogging, 3 0 door Exit, concealed vertical rod, UL fire listed, no dogging, 4 0 door Exit, concealed vertical rod, UL panic listed, hex key dogging, 3 0 door Exit, concealed vertical rod, UL panic listed, hex key dogging, 4 0 door Exit, surface vertical rod, UL fire listed, no dogging, 3 0 door Exit, surface vertical rod, UL fire listed, no dogging, 4 0 door Exit, surface vertical rod, less bottom rod, UL fire listed, no dogging, 3 0 door Exit, surface vertical rod, less bottom rod, UL fire listed, no dogging, 4 0 door Exit, rim, UL panic listed, cylinder dogging, 3 0 door Exit, rim, UL panic listed, cylinder dogging, 4 0 door Exit, surface vertical rod, UL panic listed, cylinder dogging, 3 0 door Exit, surface vertical rod, UL panic listed, cylinder dogging, 4 0 door PLATED 630 626 605/606/613 $900 $930 $1026 $1078 $1278 $1345 $1400 $1470 $1488 $1558 $1364 $1437 $1364 $1437 $1006 $1058 $1300 $1350 $905 $955 $1032 $1082 $1281 $1345 $1408 $1478 $1496 $1566 $1371 $1444 $1371 $1444 $1013 $1065 $1341 $1414 $980 $1010 $1109 $1162 $1350 $1430 $1482 $1552 $1570 $1640 $1448 $1521 $1448 $1521 $1104 $1142 $1417 $1490 LOW PROFILE STRIKE IS SUPPLIED STANDARD AND REQUIRED FOR USE IN 161 PREP. Note: When EL option is specified, Hex Key and Cylinder Dogging is not available due to space constraints within the device. Refer to Page 162 for cut down information. EXIT DEVICE ELECTRIC OPTIONS OPTION DESCRIPTION PLATED (605/606/613/626/630) 6200EL 81406 6200ED 6200AL 6200SS 6200LBR Electric Latch Retraction (Requires UL Approved PDQ Power Supply 81406) Power supply for electric latch retraction Electric Dogging Alarm Option Signal Switch Less Bottom Rod $618 $902 $590 $380 $156 Price Of Standard Unit 182 Rev 1 1/18/12

ELECTROMECHANICAL HARDWARE ELECTRIC STRIKES ELECTROMECHANICAL HDW ELECTRIC STRIKES 85001 / 85002 / 85003 Electric Strike ELECTRIC STRIKES PART DESCRIPTION 85001 85002 85003 Grade 1 Cylindrical Lock (U.L. Listed) Grade 2 Cylindrical Lock (U.L. Listed) Mortise lock (no Deadbolt) $486 $442 $486 NOTE: Check with Factory for other finishes. 183

ELECTROMECHANICAL HDW MAGNETIC LOCKS ELECTROMECHANICAL HARDWARE ELECTRIFIED ACCESSORIES POWER SUPPLY 81440 / 81406 / 81450 KEY SWITCH W/LIGHTS 81310-2MT / 81310-2MM KEY SWITCH 81310-4MT / 81310-4MM PUSH BUTTON SWITCH 81320-1MT / 81320-1MM PUSH BUTTON SWITCH 81320-6MT / 81320-6MM MUSHROOM PUSH BUTTON 81320-5MT / 81320-5MM 4.5X4.5 4 CONDUCTOR HINGE 81104 / 81108 ELECTRIFIED ACCESSORIES PART DESCRIPTION 626 629/630 81440 81450 Power supply - 12/24VDC 2.0A Power supply - 12VDC 2.0A $595 $375 81310-2MT 81310-2MM 62 Key Switch with Lights Maintained 62 Key Switch with Lights Momentary $290 $290 81310-4MT 81310-4MM 62 Key Switch Narrow Maintained 62 Key Switch Narrow Momentary $264 $264 81320-1MT 81320-1MM 62 Push Button Maintained 62 Push Button Momentary $185 $185 81320-5MT 81320-5MM 62 Push Button Mushroom Maintained 62 Push Button Mushroom Momentary $282 $282 81320-6MT 81320-6MM 62 Push Button Narrow Maintained 62 Push Button Narrow Momentary $211 $211 81104 81108 Electric hinge 4 Wire Electric hinge 8 Wire $350 $375 184 Rev 2 2/20/12

THIS PAGE LEFT BLANK INTENTIONALLY

PDQ AMERICAN EAGLE DISPLAYS PDQ and American Eagle offers it s customers a wide variety of display options to help their clients make an educated choice when it comes to the Door Hardware they choose. PDQ offers several unique display boards featuring our Grade 1 closer line as well as our cost effective exit devices. For the smaller showroom, we offer a select group of display blocks that feature PDQ's industry leading products that offer specifiably unique features and industry leading warranties DISPLAYS PDQ/AMERICAN EAGLE DISPLAY SYSTEMS 3100, 5300 & 7100 SERIES DISPLAY PART NUMBER DISP CLOSER 1 4200 & 6200 SERIES DISPLAY PART NUMBER DISP DEVICE 1 185

DISPLAY SYSTEMS PDQ DISPLAY BLOCKS DISPLAYS CL SERIES DISPLAY PART NUMBER I02500-02-05 (605) & I02500-02-07 (626) XGT, GP & SD SERIES DISPLAY PART NUMBER I02500-10-0716 (SCC 626) & I02500-10-07IC (IC 626) DISPLAYS SX, SE & KM SERIES DISPLAY PART NUMBER I02500-11-07 (626) MR SERIES DISPLAY PART NUMBER I02500-04-S07 (SECTIONAL 626) & I02500-04-E07 (ESCUTCHEON 626) PART DESCRIPTION NET PRICE DISP CLOSER 1 DISP DEVICE 1 I02500-02-05 (605) I02500-02-07 (626) I02500-10-0716 (SCC 626) I02500-10-07IC (IC 626) I02500-11-07 (626) I02500-04-S07 (SECTIONAL 626) I02500-04-E07 (ESCUTCHEON 626) 3100, 5300 & 7100 SERIES DISPLAY 4200 & 6200 SERIES DISPLAY CL SERIES DISPLAY CL SERIES DISPLAY XGT, GP & SD SERIES DISPLAY XGT, GP & SD SERIES DISPLAY SX, SE & KM SERIES DISPLAY MR SERIES DISPLAY MR SERIES DISPLAY $250 $500 $65 $60 $120 $120 $90 $135 $135 NOTE: Display prices are Net Only. No additional discount will be applied. 186

PO Box 507 2754 Creek Hill Road Leola PA 17540 717 656 4281 800 441 9692 717 656 6892 Fax www.pdqlocks.com 2012 PDQ Industries LT1007 Rev 2-12 Printed in the United States of America