SPECIFICATIONS D3375 Series Certifications UL Panic-Fire Exit Hardware, 3-Hour Fire Label California State Fire Marshell New York City MEA * Warnock/Hersey Listing D8375 Series Certifications UL 305 Pani Hardware ANSI/BHMA A156.3 Grade 1 California State Fire Marshell FEATURES Heavy duty deadlatching mechanism Strong, durable construction for a high level of security Easy to install Clean, unobtrusive design Pushbar clad or anodized, not plated, in a variety of finishes New York City MEA * *Consult Factory for Specific number Materials Pushbar made of extruded aluminum, clad, or anodized in a variety of finishes. Handing Specify handing. Pushbar Length Standard sizes: dimensioned for 36", and 48" openings. Standard width bars can be field cut to the next smallest opening width. Door Thickness 1-3/4" Only. Projection 5/8" from door face when fully projected. Strikes Made of stainless steel. Supplied with exit device.
3375 SERIES MODEL TYPE RATING DOOR CONSTRUCTION MAX SIZE SINGLE DOOR D3375 Single Point Mortise 3 Hr Hollow Metal or Wood 4'0" x 10'0" N/A D8375 Single Point Mortise N/R Hollow Metal 4'3" x 10'0" N/A MAX SIZE PAIRS & DOUBLE EGRESS 1" A SPECIFIC DIM. A STANDARD STRIKE 8360-01 EXTENDED LIP 8360-XX OPEN BACK 4009-01 SPECIFICATIONS CONTINUED Dogging Standard dogging with hex key or cylinder dogging for D8375 Series only. Electric dogging also available for D3375 and D8375 Series. D3080 Entry Trim See Trim Section. Strikes Standard strike (included).
OPTIONS AND ACCESSORIES Silent Electrification Motorized Latch Retraction SE The SE Motorized Latch Retraction option provides near-silent operation for quiet environments such as hospitals, offices, hotels, and libraries where solenoid-driven devices would be disruptive.. Electric Latch Retraction LR The LR option uses a solenoid mounted in the pushbar for instantaneous unlocking and locking of the exit device from a remote location or access control device. Because electrical operation of device is fail-secure, this option can be used on fire-rated as well as lifesafety applications. Request to Exit (REX) Monitor / Signal Switch M1 M2 Mounted in the exit device pushbar on the hinge end, the switch can be used to activate signal light, horn, monitor, or other devices. Cylinder Dogging For management control of dogging exit devices for life-safety exit devices only. Nonrated door Standard. Electric Dogging ED A holding magnet keeps the pushbar depressed (set manually) and the latch retracted for lower profile exit devices, resulting in less damage and quieter operation. Matching End Caps MEC Matching end caps are available for applications where it is preferable that the end caps match the finish of the exit device. Available Finishes 313 Dark Bronze Anodized 335 Black Anodized 605 Bright Brass 606 Satin Brass 611 Bright Bronze 612 Satin Bronze 628 Clear Anodized 629 Bright Stainless 630 Satin Stainless 13E Dark Oxidized Satin Bronze
HOW TO ORDER MODEL DESCRIPTION AVAILABILITY (DOOR TYPE) D3375 Inset Mortis Exit Device - Lock Edge Latching Metal Doors - Rated for Single Door Application or Pairs with a fixed hollow Metal Mullion D8575 Inset Mortis Exit Device - Lock Edge Latching Metal Doors - Non Rated for Single Door Application or Pairs with a fixed hollow Metal Mullion ELECTRICAL OPTIONS DESCRIPTION AVAILABILITY (LENGTHS) -02 Non Electrical - Mechanical Function Only 36" & 48" XM Single Monitor Switch with Electrolynx Cable 36" & 48" XM2 Dual Monitor Switch with Electrolynx Cable 36" & 48" XED Electric Dogging with Electrolynx Cable 36" & 48" XEDM Electric Dogging with Single Monitor Switch with Electrolynx Cable 36" & 48" XEDM2 Electric Dogging with Dual Monitor Switch with Electrolynx Cable 36" & 48" XSE Silent Electrification with Electrolynx Cable 36" & 48" XSEM Silent Electrification with Single Monitor Switch and Electrolynx Cable 36" & 48" XSEM2 Silent Electrification with Dual Monitor Switch and Electrolynx Cable 36" & 48" XLR Electric Latch Retraction with Electrolynx Cable 36" & 48" XLRM Electric Latch Retraction with Single Monitor Switch and Electrolynx Cable 36" & 48" XLRM2 Electric Latch Retraction with Dual Monitor Switch and Electrolynx Cable 36" & 48" BAR LENGTHS DESCRIPTION AVAILABILITY (DOOR WIDTH) 36" Exit Device Bar Length of 24.5" from end cap to end cap 35-1/16" to 41" Door Width 48" Exit Device Bar Length of 30.5" from end cap to end cap 41-1/16" to 51" Door Width HANDING DESCRIPTION AVAILABILITY 07 RHR - Right Hand Reverse Swing All Exit Device Models 08 LHR - Left Hand Reverse Swing
HOW TO ORDER FINISH DESCRIPTION 313 Dark Bronze Anodized 335 Black Anodized 605 US3 - Bright Brass, Clear Coated 606 US4 - Satin Brass, Clear Coated 611 US9 - Bright Bronze, Clear Coated 612 US10 - Satin Bronze, Clear Coated 628 Satin Aluminum, Clear Anodized 629 US32 - Bright Stainless Steel 630 US32D - Satin Stainless Steel 13E 10BE Dark Oxidized Satin Bronze (Equivalent to 613E) ACCESSORIES DESCRIPTION AVAILABLITY (FINISH) Standard Black Plastic End Cap 313, 335, 628 MEC Matching End Caps 605, 606, 611, 612, 629, 630, 13E LINE ITEM MODEL ELECTRIC OPTION HANDING BAR LENGTH FINISH ACCESSOREIS D3375-07 36 630 MEC * Door is to be prepped for the device ** Door is to have the device installed *** Device is to shipped as a loose item