www.kinkmann.com moduar distribution bocks 40 to 0 moduar distribution bocks 40 to 0 048 76 + 048 46 048 77 Technica characteristics (p. 2) Standard distribution Connection with or without Starfix ferrues (p. 370) Sef-extinguishing, according to EN 60695-2-11: 960 C on active part supports Pack Cat.Nos Monoboc moduar distribution bocks Mounting on rai 4 or on pate with 2 screws Suppied with insuated back pate and transparent protective front cover Each bar can be abeed using CB 3 Possibe to add IP 2X termina bock (except Cat.No 048 77) oube poe Equipped with 2 bars Isc Rating peak Icw Number () (kâ) (k) of modues 5 048 81 40 20 3 6 10 048 80 100 20 4.5 4 5 048 82 1 18 4.5 8 Four poe Equipped with 4 bars 5 048 85 40 20 3 6 10 048 84 100 20 4.5 4 5 048 86 1 20 4.5 6 5 048 88 (1) 1 14.5 4.2 8 1 048 76 (2) 1 20 4.5 10 1 048 79 (1) 160 27 8.4 10 1 048 77 0 42 14.4 9 Moduar distribution bocks Mounting on rai 4 Fitted with Lexic abe hoder Can be joined together Possibiity of forming a four poe distribution bock by adding modues Singe poe Rating Isc peak Number () (kâ) of modues 4 048 71 1 35 2 4 048 83 160 27 2 4 048 73 0 60 2 istribution terminas 048 68 1 048 67 160-6 outputs mm 2 fexibe - Isc peak 30 kâ Can be fitted directy onto downstream termina of PX 1/160, Vistop 100/160 and X H 1 1 048 68 0-4 outputs 35 mm 2 fexibe and 2 outputs mm 2 fexibe - Isc peak 36 kâ Can be fitted directy onto downstream termina of PX 0/0 ER and PX-IS 0 n Section for connecting rigid or fexibe conductors (with Starfix ferrues) istribution Bocks Connections per bar Rigid conductors Fexibe conductors with ferrues Cat.Nos Number Ø Section Section Starfix ferrues (mm 2 ) (mm 2 ) Cat.Nos 048 67 6 8.5 6 to 376 68 to 71 048 68 4 10 6 to 35 376 68 to 77 2 8.9 6 to 376 68 to 71 12 5.3 16 to 50 1.5 to 10 376 64 to 69 048 71 4 10 1.5 to 10 16 to 35 376 70 to 72 376 70 to 77 4 6 70 to 150 2.5 to 10 376 66 to 69 048 73 6 8.5 2.5 to 16 10 to 376 69 to 72 1-10 to 35 70 to 120-048 80 5 5.3 2.5 to 10 1.5 to 10 376 64 to 69 2 7.5 10 to 6 to 16 376 68 to 70/72 048 81 11 4.3 1.5 to 4 0.75 to 4 376 62 to 67 2 6 6 to 16 4 to 10 376 67/68/69 11 5.3 2.5 to 10 1.5 to 10 376 64 to 69 048 82 2 7.5 10 to 6 to 16 376 68 to 70/72 2 9 10 to 35 10 to 376 69/72/71 7 5.3 35 to 70 1.5 to 10 376 64 to 69 048 83 2 7.5 2.5 to 10 6 to 16 376 68/69/72 3 8.9 6 to 10 to 376 69/72 1-10 to 35 to 50 376 71 to 77/78 048 84 5 5.3 2.5 to 10 1.5 to 10 376 64 to 69 2 7.5 10 to 6 to 16 376 68 to 70/72 048 85 11 4.3 1.5 to 4 0.75 to 4 376 62 to 67 2 6 6 to 16 4 to 10 376 67/68/69 7 5.3 2.5 to 10 1.5 to 10 376 64 to 69 048 86 2 7.5 10 to 6 to 16 376 68 to 70/72 2 9 10 to 35 10 to 376 69/72 048 88 11 5.3 2.5 to 10 1.5 to 10 376 64 to 69 4 8.5 10 to 35 6 to 376 68 to 71 1 35 to 70 35 to 70 376 77/78 048 79 8 5.3 2.5 to 10 1.5 to 10 376 64 to 69 4 7.5 10 to 6 to 16 376 68 to 70/72 2 8.5 10 to 35 10 to 376 69/72 14 5.3 2.5 to 10 1.5 to 10 376 64 to 69 048 76 1 7.5 10 to 6 to 16 376 68 to 70/72 1 8.5 10 to 35 6 to 376 68 to 70/72 1 - - 16 to 35 376 70 to 77 6 6 2.5 to 16 2.5 to 10 376 66 to 69 2 7.5 10 to 6 to 16 376 68 to 70/72 048 77 2 8.5 10 to 35 10 to 376 69 to 72 1 10 16 to 50 16 to 35 376 70 to 72/77 1-50 to 120 50 to 120 376 78 PX MCCBs (from p. 74 to 103) Vistop isoating switches (p. 108) X MCBs (p. 1 to 153) (1) With short ferrue suppied for fexibe connection mm 2 (2) Incoming conductors must be equiped with ferrues (p. 370) Connection: mm 2 witth ferrues without insuating fange Red cataogue numbers : New products 1
moduar distribution bocks 40 to 0 (continued) www.kinkmann.com Conform to EN 60947-1 Insuating votage according to EN 60947-1 / IEC 60664-1: 500 V Impuse votage (Uimp): 8 kv - egree of poution: 3 Use in C: without derating Sef-extinguishing 960 C on active parts supports n Moduar distribution bocks Singe poe 1-160 - 0, Cat.Nos 048 71/83/73 60 7 1 n Monoboc moduar distribution bocks oube poe 40-100 - 1, Cat.Nos 048 81/80/82 39 23 w 50 Four poe 40-100 - 1, Cat.Nos 048 85/84/86/88 86 23 49 88.5 Cat.Nos Width 048 80 70 048 81 105 048 82 140 048 84 70 048 85 105 048 86 105 048 88 140 048 76 179 048 77 160 048 79 179 101.5 45 Connection 104.5 1 160 0 36 Torque 3.5 Nm 10 Nm 36 Torque 3.5 Nm 36 Torque 24 Nm w 50 Four poe 1 Cat.No 048 76 91.5 97 Cat.No 048 71 n istribution terminas, Cat.Nos 048 67/68 160 0 47 6.5 12.5 26.5 10.5 Cat.No 048 83 Cat.No 048 73 60 30 6.5 10 17 Ø 10 W Four poe 160, Cat.No 048 79 50 56 16 80 91.5 23 96.8 w 50 Four poe 0, Cat.No 048 77 Sef-extinguishing 960 C according to EN 60695-2-11 W 45 10 75 150 85 5.5 70.5 134.5 75 n Use of IP 2X termina bocks (p. 0) Moduar IP 2X erating distribution Termina bocks bocks Votage Rating 048 80 048 32 (1) 400 V 80 048 81 048 34 (1) 400 V 40 048 82 048 35 (1) 400 V 100 048 84 048 42 (2) 400 V 80 048 85 048 (2) 400 V 40 048 86 048 (2) 400 V 100 048 88 048 45 (2) 400 V 100 048 76 048 46 (2) 400 V 100 048 79 048 45 (2) 400 V 100 (1) T (2) Neutra 048 80 + 048 32 2
www.kinkmann.com power distribution bocks power distribution bocks n Extra-fat for ugs Sef extinguishing: 960 C according to EN 60695-2-11 1 Cat.No 374 47 - Isc peak kâ Insuating votage according to EN 60947-1 / IEC 60664-1: 500 V 265 135 59 61.5 374 00 Standard distribution Suppied with screen protection Pack 373 08 Cat.Nos Extra-fat for ugs 1 1 374 47 Fixing on rai EN 60715 4 or on pate with M6 screws. Equipped with: - 1 incoming 35 mm 2 (possibe tapp-off) - 10 phase outgoing 16 mm 2 - M5 screws - 17 neutra outgoing 16 mm 2 - M5 screws Connection possibe using connector Cat.No 373 65 (p. 206) 0 1 374 00 Fixing on pain pate or on pate with M6 screws istribution bock 1 incoming 150 mm 2 per poe: - 1 poe is composed of 3 parts - Each part can receive: 1 x 70 mm 2 or 1 x 50 mm 2 and 1 x 35 mm 2, or 2 x 35 mm 2 or 1 connector with 3 outgoing terminas Cat.No 374 03 (p. 4) Stepped for ugs 1 1 373 95 Fixing on rai EN 60715 4 depth 15 mm or on pate with screws Ø4 mm (by removing caws) 4 bars 12 x 4 mm with five connectors 2 x 10 mm 2 /bar (not mounted) 1 374 30 Fixing on rai EN 60715 4, with caws Cat.No 374 39 (p. 297) or on pate with M6 screws 4 bars 15 x 4 mm suppied with: - 1 incoming 35 mm 2 - M8 screws - 5 outgoing mm 2 - M6 screws 160 1 374 31 Fixing on rai EN 60715 4, with caws Cat.No 374 39 (p. 297) or on pate with M6 screws 4 bars 18 x 4 mm suppied with: - 1 incoming 70 mm 2 max. - M8 screws - 5 outgoing 35 mm 2 - M6 screws 0 1 374 35 Fixing on rai EN 60715 4, with caws Cat.No 374 39 (p. 297) or on pate with M6 screws 4 bars x 4 mm suppied with: - 1 incoming 120 mm 2 - M10 screws - 5 outgoing 50 mm 2 - M8 screws 400 1 373 08 Horizonta mounting in XL 3 400 cabinets, vertica in XL 3 400 cabe seeve, vertica in XL 3 800 interna cabe seeve or on soid pate using the M6 screws suppied istribution bock consisting of 4 tin-coated bars 32 x 5 mm with insuated protection Composition of each bar: - 2 x Ø 8.5 mm untapped hoes for power suppy (fexibe bars, ) - 21 outgoing M6 hoes (70 mm 2 ugs max.) 1 374 42 Fixing on rai EN 60715 4, with caws Cat.No 374 39 (p. 297) istribution bock consisting of 4 bars 32 x 5 mm Composition of each bar: - 2 x Ø 10.5 mm untapped hoes for power suppy (185 mm 2 max.) - 15 outgoing M6 hoes, 4 outgoing M8 hoes N N 58 60 289 0 Cat.No 374 00 - Isc peak 60 kâ Insuating votage according to EN 60947-1 / IEC 60664-1: 1000 V 5 220 B 75.5 140 228 200 1 150 165 M8 connection width 35 mm M6 connection width 35 mm n Stepped for ugs 1 Cat.No 373 95 - Isc peak 20 kâ Insuating votage according to EN 60947-1 / IEC 60664-1: 600 V Sef extinguishing: 850 C according to EN 60695-2-11 77 71 108 98 1/160/0 Cat.Nos 374 30/31/35 - Isc peak 35 kâ Insuating votage according to EN 60947-1 / IEC 60664-1: 1000 V Sef extinguishing: 850 C according to EN 60695-2-11 Uimp: 12 kv, degree of poution: 3 I J 400 (1) Cat.No 373 08 - Isc peak 42 kâ. Insuating votage according to EN 60947-1 / IEC 60664-1: 1000 V. Uimp: 12 kv, degree of poution: 3 Sef extinguishing: 960 C according to EN 60695-2-11 Cat.No 374 42 - Isc peak 50/75 kâ. Insuating votage according to EN 60947-1 / IEC 60664-1: 1000 V fixing centres 50 mm,1500 V fixing centres 75 mm. Uimp: 8 kv fixing centres 50 mm, 12 kv fixing centres 75 mm. egree of poution: 3 460 Cat.No 373 08 395 260 300 107 6.5 83.5 14.5 122.5 0 270 (1) Horizonta mounting with minimum facepates height 300 mm H C G E F imensions istribution bocks B C E F G H I J 1 2 1 110 1 165 189 6.5 117.5 165 108 160 240 1 110 1 165 189 6.5 117.5 180 120 0 260 155 110 1 185 209 6.5 147.5 195 120 101 0 3
www.kinkmann.com connection connection n Connectors Cat.No 374 03 Cat.No 374 05 4 16 Ø 8.5 4 15 20 15 Ø 8.5 12 21.5 29 12 21.5 29 11.5 29 11.5 62.5 374 05 on copper bar "Standard" distribution Pack 374 80 330 74 Cat.Nos Connectors With 3 outgoing terminas 200 10 374 03 Fits onto fat copper bars and distribution bock Cat.No 374 00 (p. 3) Capacity: - 1 x Ø5.3 mm outgoing termina for 1.5 to 6 mm 2 connection - 2 x Ø7.5 mm outgoing terminas for 6 to 16 mm 2 connection With 7 outgoing terminas 400 5 374 05 Fits onto fat copper bars Capacity: - 4 x Ø5.3 mm outgoing terminas for 1.5 to 6 mm 2 connection - 3 x Ø7.5 mm outgoing terminas for 6 to 16 mm 2 connection uminium/copper distribution boxes up to 300 mm 2 dapt the cross-section of the incoming or outgoing cabe in order to connect a device IP 2X box, sef-extinguishing transparent cover Universa fixing on 4 rai or on pate Reversibe seaabe cover with area for abe Operationa votage: Ue = 690 V± according to EN 60947-1/IEC 60664-1 uminium connection Conform to standard NFC 63-061 cass B Copper connection Conform to standard EN 60947-7-1 Suppied with copper couping strip 5 374 80 uminium/copper 120 mm 2 distribution box 300 max. Incoming: 16 to 120 mm 2 uminium or 16 to 120 mm 2 copper Outgoing: 16 to 70 mm 2 copper 4 374 81 uminium/copper 300 mm 2 distribution box 540 max. Incoming: 70 to 300 mm 2 uminium or 70 to 185 mm 2 copper Outgoing: 70 to 150 mm 2 copper n uminium/copper distribution boxes Technica characteristics Cat.No 374 80 Cat.No 374 81 Impuse votage (Uimp) 10 kv 12 kv Short-circuit current Icw for 1 second 14.5 k 22.2 k Tightening torque 14 Nm 30 Nm imensions Cat.No 374 80 Cat.No 374 81 54 1 52.5 Connection Junction I/Cu Cu 152 I/Cu Cu I/Cu istribution I/Cu Connecting in series This bridging is made with 2 copper bars (suppied with each product) and accept max. rating of incoming cabe for tap-off between 2 distributions boards 1 66 Cu 157.5 74 65 Junction boxes IP 30 - IK 07 For copper cabes 4 connections per poe Reversibe stirrup for zero camping Fitted with 4 or 5 junction bocks mounted on an insuated strip with a sheet stee cover Knock-out entries for conduits Ø9 and 21 mm Seaabe cover screws RL 7032 Cabe section Rated current Poes (mm 2 ) () 1 330 4 35 1 1 330 54 4 70 192 1 330 74 4 150 309 1 330 84 4 240 415 n Junction boxes Ø G F 45 E C Cat.Nos C E F G 330 236 75 89 264 40 6 330 54 276 84 99 314 40 7 330 74 319 103 118 361 50 7 330 84 510 129 1 613 65 9 4
www.kinkmann.com busbars supports seection standard distribution Max. In () Supports Fat copper bars C-section auminium bars 400 800 1000 1600 4000 1600 1600 1600 1600 Mounting 373 10 373 15 373 20 373 21 373 22/23 373 24/ 373 66 373 68 373 67 373 69 XL 3 400 Vertica at back of cabinet or encosure Vertica at back of cabe seeve XL 3 800 Vertica at back of cabinet or encosure + 373 14 Vertica at back of interna cabe seeve Vertica at back of externa cabe seeve Main horizonta at top or at bottom of cabinet : 475 : 7 : 975 XL 3 4000 (5) (5) (5) (6) (5) (1) (1)(7) (7) Horizonta transfer : 7 : 975 (4+5) (5) (1) W W Vertica atera inside cabe seeve Vertica atera inside cabinet behind upright Vertica at back of cabinet Horizonta at back of cabinet : 475 : 7 : 975 : 7 : 975 W : 475 W : 7 W : 975 W : 475 W : 7 W : 975 + 373 14 (3) (3) (3) (1) (1) (1) (1) (1) (1) (1) (1) (2) (1) (3) (3) (3) (3) (3) (3) (1) With upright Cat.No 205 20 in cabe seeve (2) epth min. 7 mm (3) Fixed supports ony (4) Inside compementary cabe seeve (5) Partia chassis (6) With crosspieces Cat.No 205 52 (7) With crosspieces Cat.No 205 53 Red cataogue numbers : New products 5
www.kinkmann.com fat copper bars seection standard distribution 400 800 1000 Fat busbars supports Cat.No 373 10 Cat.No 373 15 Cat.No 373 20 Cat.No 373 21 Fat copper bars Cat.Nos Cross Section Number of bar per poe I () I () I () I () IP 30 IP > 30 IP 30 IP > 30 IP 30 IP > 30 IP 30 IP > 30 374 34 18 x 4 1 245 200 245 200 245 200 - - 374 38 x 4 1 280 0 - - - - - - 374 18 x 5 1 330 270 330 270 330 270 - - 374 19 32 x 5 1 450 400 450 400 450 400 - - 1 - - - - 700 630 700 630 374 40 50 x 5 4 - - - - - - - - 1 - - - - 800 700 800 700 374 41 63 x 5 4 - - - - - - - - 1 - - - - - - 950 850 374 59 75 x 5 4 - - - - - - - - 1 - - - - - - 1050 900 374 43 80 x 5 4 - - - - - - - - 1 - - - - - - - - 374 46 100 x 5 4 - - - - - - - - 1 - - - - - - - - 1 x 5 4 - - - - - - - - 1 - - - - - - - - 80 x 10 1 - - - - - - - - 100 x 10 1 - - - - - - - - 120 x 10 6
www.kinkmann.com bar mounting: edgewise 1600 4000 réf. 373 22/23 réf. 373 24/ bar mounting: bar mounting: fa t edgewise bar mounting: f a t I () I () I () I () IP 30 IP > 30 IP 30 IP > 30 IP 30 IP > 30 IP 30 IP > 30 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 700 630 430 350 700 630 500 420 1150 1000 650 510 1180 1020 750 630 - - - - 1600 1380 1000 900 - - - - 2020 1720 1120 1000 800 700 500 400 800 700 600 500 1350 1150 770 590 1380 1180 750 630 - - - - 1900 1600 1100 1000 - - - - 2350 1950 1350 1200 950 850 600 475 950 850 700 600 1500 1300 890 700 1600 1400 1000 850 - - - - 2200 1900 10 1100 - - - - 2700 2300 1600 1400 1000 900 630 500 1000 900 750 630 1650 1450 940 740 1700 1480 1050 900 - - - - 2350 2000 1300 1150 - - - - 2850 2400 1650 1450 10 1050 750 580 10 1050 850 700 1900 1600 1120 900 2050 1800 1200 1050 - - - - 2900 2450 1600 1400 - - - - 3500 2900 1900 1650 - - - - 1450 1270 1000 800 - - - - 00 2150 1450 10 - - - - 3450 2900 1800 1600 - - - - 4150 3450 2150 1950 - - - - 1460 1270 1150 950 - - - - 00 2150 1700 1500 - - - - 3450 2900 00 2000 - - - - 1750 1500 1350 1150 - - - - 3050 50 2000 1650 - - - - 4150 3500 2900 2400 - - - - 2000 1750 1650 1450 - - - - 3600 2950 00 2000 - - - - 4800 4000 3500 3000 <<< ISTRIBUTION SYSTEM Be free to choose your distribution system Soutions up to 4 000. Fat copper busbars C-section auminium busbars Isoating supports and fat copper busbars, for standard distribution up to 4 000 Isoating supports and C-section auminium busbars, for standard distribution up to 3 200 (with 2 bars per poe) Possibe mounting: vertica or horizonta, inside cabinets, encosures or cabe seeves Perfect integration into XL 3 cabinets thanks to compete range of accessories These products are part of distribution systems > See p. 192-193 7
www.kinkmann.com isoating supports for busbars XL³ cabinets and encosures 373 10 373 24 Mounting (p. 260 to 263) "Standard" distribution Pack Cat.Nos 1 bar per poe universa supports 280 10 373 98 Singe poe support for fat copper bars 12 x 2 or 14 x 4 mm 10 374 37 Singe poe support for fat copper bars 15 x 4, 18 x 4 or x 4 mm 5 373 96 Set of 2 four poe supports for fat copper bars 12 x 2 or 12 x 4 mm 1 374 32 Set of 2 four poe supports for fat copper bars 15 x 4 or 18 x 4 mm 1 374 36 Set of 2 four poe supports for fat copper bars x 4 mm 1 bar per poe 400 1 373 15 Support for fat copper bars 18 x 4, x 5 and 32 x 5 mm For XL 3 400 cabinets and encosures 1 373 10 Support for fat copper bars 18 x 4, x 4, x 5 and 32 x 5 mm, in soping position to create a vertica busbars at back For direct mounting on soid or perforated pate 800 1 373 20 Support for fat copper bars 18 x 4, x 5, 32 x 5, 50 x 5 and 63 x 5 mm in soping position 1000 1 373 21 Support for fat copper bars 50 x 5, 63 x 5, 75 x 5 and 80 x 5 mm in staggered position Pack Cat.Nos 1 or 2 bars per poe Supports for fat copper bars 50 x 5, 63 x 5, 75 x 5, 80 x 5 and 100 x 5 mm, in aigned position 1600 1 373 22 Fixed support 1 373 23 dditiona support Mounted in addition to fixed support Cat.No 373 22 to compy with the distances (Isc withstand) 1 to 4 bars per poe Supports for 4 fat bars from 50 x 5 to 1 x 5 mm or 3 bars from 50 x 10 to 120 x 10 mm, in aigned position 4000 1 373 24 Fixed support 1 373 dditiona support Mounted in addition to fixed support Cat.No 373 24 to compy with the distances (Isc withstand) Fixing supports djustabe crosspieces 1 205 51 Set of 2 crosspieces ength 350 mm 1 205 52 Set of 2 crosspieces ength 600 mm 1 205 53 Set of 2 crosspieces ength 850 mm Crosspieces for partia chassis 1 205 31 Set of 2 fixed crosspieces ength 350 mm 1 205 32 Set of 2 fixed crosspieces ength 600 mm Extension piece 1 373 14 For mounting busbars supports Cat.No 373 15 in XL 3 800 and 4000 cabinets and encosures These products are part of protection and distribution systems > See p. 192-193 8
www.kinkmann.com copper bars and accessories isoating supports for c-section busbars XL³ cabinets and encosures 374 19 + 373 11 374 40 374 10 Standard distribution 373 69 373 66 Mounting (p. 260 to 263) Pack Cat.Nos Copper bars Rigid, fat, threaded hoes Cross I permissibe() Hoes Length section IP 30 IP >30 Ø mm 10 373 88 12 x 2 110 80 M5 990 10 373 89 12 x 4 160 1 M5 990 10 374 33 15 x 4 200 160 M5 990 10 374 34 18 x 4 245 200 M6 990 10 374 38 x 4 280 0 M6 990 4 374 18 x 5 330 270 M6 1750 4 374 19 32 x 5 450 400 M6 1750 Rigid fat cear hoes Cross I permissibe() Hoes Length section IP 30 IP > 30 Ø mm 1 374 40 50 x 5 700 630 10.5-6.5 1750 1 374 41 63 x 5 800 700 10.5-8.5 1750 1 374 59 75 x 5 950 850 10.5-6.5 1750 1 374 43 80 x 5 1000 900 10.5-6.5 1750 1 374 46 100 x 5 10 1050 10.5-6.5 1750 Fexibe Suppied fat, ength 2 m Cross I () section IP 30 IP > 30 1 374 10 13 x 3 200 160 1 374 67 20 x 5 400 0 1 374 11 24 x 4 400 0 1 374 12 32 x 5 630 400 1 374 57 50 x 5 850 630 1 374 58 50 x 10 10 1000 ccessories Isoating profie 1/10 373 11 Isoating profie for fat copper bars 18 x 4, x 4, x 5 and 32 x 5 mm, ength 1 m Suppied with fixing cips Insuating screws 50 367 74 M6 x 10 HF screws with contact washe 50 367 75 M6 x 10 4 4 5 Ø 8,5 5 12.5 18 18 Standard distribution Pack Cat.Nos Supports from 630 to 1600 Support for a C-section auminium bars For encosures configurations possibe in XL 3 4000 encosures: - Vertica at the back of the encosure - Side-mounted vertica behind upright - Top horizonta - Horizonta transfer 1 373 66 For encosures depth 7 mm or 475 mm in partia chassis 1 373 68 For encosures depth 975 mm The support can be doubed for a current of 3200 For cabe seeves For mounting in cabe seeves in staggered position: - Side mounted atera 1 373 67 For cabe seeves depth 7 mm or 475 mm 1 373 69 For cabe seeves depth 975 mm The support can be doubed (externa cabe seeves ony) for a current of 3200 C-section auminium bars Length 1780 mm Cross I () section (mm 2 ) IP 30 IP > 30 1 373 54 524 800 630 1 373 55 549 1000 800 1 373 56 586 10 1000 1 373 57 686 1450 10 1 373 58 824 1750 1600 Connection pates For connecting C-section bars to extend a busbars or to connect vertica bars to horizonta bars 1 373 82 1 bar per phase 1 373 83 2 bars per phase ccessories 80 373 59 M10 hammer head bot 1 373 77 For joining supports Cat.Nos 373 66 and 373 68 to create busbars up to 3200 Bod pack quantities : Minimum quantities to be ordered. Red cataogue numbers : New products These products are part of protection and distribution systems > See p. 192-193 9
www.kinkmann.com isoating supports for busbars n Peak current Ipk The distance between the busbar supports depends on the eectrodynamic forces generated when there is a short-circuit, these being directy proportiona to the peak vaue of the short-circuit current (Ipk) Two methods can be used to determine the peak current vaue according to data that is generay avaiabe: Using the imiting capacity of the protective devices The imitation curves of the protective devices (X and PX) give the imited peak current according to the prospective short-circuit current The "Non-imited peak Isc" curve corresponds to no protection The tabe opposite gives the imited peak vaue (Ipk) for a maximum prospective short-circuit vaue equa to the breaking capacity (Icu) of the device. For ower prospective short-circuit vaues, reading the curves wi provide an optimised vaue Rating Isc peak Max. () (kâ) PX 1 16-11.9 PX 1 40-63 15 PX 1 100-1 17 PX 160 14.3 PX 160 40 to 160 20 PX 0 ER 100 to 0 22 PX 0 27 PX-H 0 34 PX 630 34 PX-H 630 42 PX 1600 85 PX-H 1600 110 Isc peak Isc imited peak Isc non-imited peak prospective Isc Isc RMS. The peak vaue is much higher if there are no imiting protective devices. This vaue is cacuated by appying a coefficient of asymmetry (n) to the prospective rms vaue shown in the tabe opposite Isc prospective RMS (k) n 5 1.5 5 < I 10 1.7 10 < I 20 2 20 < I 50 2.1 50 < I 2.2 n etermining the distances between the supports E Maximum distances "" E adjustabe Supports 373 98 374 37 Bars 373 88 (12 x 2) or 373 89 (12 x 4) 374 33 (15 x 4) or 374 34 (18 x 4) or 374 38 ( x 4) E 50 75 100 1 50 75 100 1 Isc peak 10 400 600 800 350 600 750 (Ipk in kâ) 15 300 450 600 800 0 400 500 700 20 0 350 450 600 150 2 300 375 200 0 300 400 1 150 200 0 30 100 1 150 175 35 100 1 150 Maximum distances "" E fixed Supports 373 96 374 32 374 36 373 10 373 15 373 88 373 89 374 33/34 374 38 374 34 374 38 374 18 374 19 374 34 374 18 374 19 Bars (12 x 2) (12 x 4) (15 x 4) ( x 4) (18 x 4) ( x 4) ( x 5) (32 x 5) (18 x 4) ( x 5) (32 x 5) (18 x 4) Isc peak 10 200 400 550 650 550 650 800 900 1000 1200 1500 (Ipk in kâ) 15 150 300 400 500 400 600 700 800 700 1000 1200 20 1 200 300 400 300 450 550 700 550 750 950 100 150 200 350 0 350 400 500 400 600 750 30 150 200 200 300 350 400 350 500 650 35 100 150 150 0 300 350 300 400 550 40 100 150 200 300 300 0 350 450 45 150 200 200 200 300 400 50 150 175 100 200 300 400 55 100 150 100 200 0 300 60 150 200 0 300 70 150 200 0 80 150 200 0 260
www.kinkmann.com isoating supports for busbars n etermining the distances between the supports (continued) Maximum distances "" - E fixed: 75 mm Supports 373 20 373 21 1 fat bar per poe 1 fat bar per poe Bars 374 34 374 18 374 19 374 40 374 41 374 40 374 41 374 59 374 43 (18 x 4) ( x 5) (32 x 5) (50 x 5) (63 x 5) (50 x 5) (63 x 5) (75 x 5) (80 x 5) Isc peak (Ipk in kâ) 10 800 800 900 1000 1200 1200 1200 15 400 600 600 700 800 800 900 1000 1000 20 300 450 500 600 700 650 700 750 750 0 350 400 500 550 500 600 600 600 30 2 300 350 400 450 400 500 550 550 35 200 0 300 350 400 350 450 450 450 40 175 200 0 275 300 300 350 400 400 45 150 200 200 2 0 300 300 350 350 50 150 150 150 200 200 0 0 300 300 60 1 1 1 150 150 200 0 0 0 70 100 100 100 150 150 150 200 200 200 80 100 100 100 150 200 200 90 100 150 200 200 100 100 150 150 150 110 100 100 150 150 120 100 100 100 100 Maximum distances "" - E fixed: 75 mm Supports 373 22, 373 23 1 fat bar per poe 2 bars per poe Bars 374 40 374 41 374 59 374 43 374 46 374 40 374 41 374 59 374 43 374 46 (50 x 5) (63 x 5) (75 x 5) (80 x 5) (100 x 5) (50 x 5) (63 x 5) (75 x 5) (80 x 5) (100 x 5) Isc peak (Ipk in kâ) 10 1000 1200 1200 1200 1200 15 800 900 1000 1000 1200 20 650 700 750 750 900 500 600 600 600 700 30 400 500 550 550 600 700 600 35 350 450 450 450 550 40 300 350 400 400 450 550 600 650 650 700 45 300 300 350 350 400 50 0 0 300 300 350 450 500 500 500 550 60 200 0 0 0 300 350 400 400 400 450 70 150 200 0 0 0 0 350 350 350 400 80 100 150 200 200 200 0 300 300 300 300 90 100 150 200 200 200 200 0 300 300 300 100 100 150 150 150 150 200 200 0 0 0 110 100 100 150 150 150 200 150 200 200 200 120 100 100 100 100 100 150 150 200 200 200 dditiona support: Horizonta busbars (1) Mounted in addition: - to 2 fixed supports in encosure width 7 et 975 - to fixed support in cabe seeves width 475 Vertica busbars Mounted in addition to 3 fixed supports if necessary (1) In case of fat bar mounting, use fixed support ony Maximum distances "" Supports 373 66/67 373 68/69 1 C-section auminium bar per poe 1 C-section auminium bar per poe Bars 373 54 373 55 373 56 373 57 373 58 373 54 373 55 373 56 373 57 373 58 Isc peak (Ipk in kâ) 30 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 40 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 52 800 800 800 800 800 800 800 800 800 800 63 700 700 700 700 700 600 600 600 600 600 73 600 600 600 600 600 500 500 500 500 500 80 600 600 600 600 600 500 500 500 500 500 94 500 500 500 500 500 400 400 400 400 400 105 500 500 500 500 500 400 400 400 400 400 132 - - 500 500 500 - - 400 400 400 154 - - 400 400 400 - - 300 300 300 261
www.kinkmann.com isoating supports for busbars (continued) Maximum distances "" with bars thick 5 mm - E fixed: 1 mm Supports 373 24, 373 1 bar per poe 2 bars per poe 3 bars per poe 4 bars per poe Bars 50 x 5 63 x 5 75 x 5 100 x 5 1 x 5 50 x 5 63 x 5 75 x 5 100 x 5 1 x 5 50 x 5 63 x 5 75 x 5 100 x 5 1 x 5 50 x 5 63 x 5 75 x 5 100 x 5 1 x 5 80 x 5 80 x 5 80 x 5 80 x 5 Isc peak (Ipk in kâ) 10 1550 1700 1700 1700 1700 1700 1700 1700 1700 1700 - - - - - - - - - - 15 1050 1200 1350 1550 1700 1550 1700 1700 1700 1700 1700 - - - - - - - - - 20 800 900 1000 1150 1350 1200 1350 1500 1700 1700 1550 1700 1700 1700 1700 1700 1700 1700 1700 1700 650 750 800 950 1100 950 1100 1200 1400 1550 10 1450 1600 1700 1700 1550 1700 1700 1700 1700 30 550 600 700 800 900 800 900 1000 1150 1300 1050 1200 1350 1550 1700 1300 1500 1700 1700 1700 35 450 550 600 650 800 700 800 900 1000 1150 900 1050 1150 1300 1500 1150 10 1450 1650 1700 40 400 450 550 600 700 600 700 800 900 1000 800 900 1050 1150 1300 1000 1100 1300 1450 1650 45 350 400 450 550 600 550 600 700 800 900 700 800 900 1050 1200 900 1000 1150 1300 1450 50 350 350 450 500 550 500 550 650 700 800 650 750 850 950 1050 800 900 1050 1150 1350 60 300 300 350 400 450 400 450 550 600 700 550 600 700 800 900 650 750 850 1000 1100 70 0 0 300 350 400 350 400 450 500 650 450 550 600 700 750 600 650 750 850 950 80-0 0 300 350 300 350 400 450 550 400 450 550 600 700 500 600 650 750 850 90 - - 0 0 300 300 300 350 400 500 350 400 500 550 600 450 500 600 650 750 100 - - - 0 300 0 300 300 350 500 350 400 450 500 550 400 450 550 600 700 110 - - - 0 0 0 0 300 350 450 300 350 400 450 500 350 450 500 550 600 120 - - - - 0-0 0 300 450 300 300 350 400 450 350 400 450 550 550 130 - - - - 0 - - 0 300 400 0 300 350 350 450 300 350 400 500 550 140 - - - - - - - 0 0 400 0 0 300 350 400 300 350 400 450 500 150 - - - - - - - - 0 350 0 0 300 350 350 300 300 350 400 450 160 - - - - - - - - 0 350-0 0 300 350 0 300 350 400 350 170 - - - - - - - - - 350-0 0 300 350 0 300 300 350 300 180 - - - - - - - - - 300 - - 0 300 300 0 0 300 350 300 190 - - - - - - - - - - - - 0 0 300 0 0 300 300 0 200 - - - - - - - - - - - - - 0 300-0 0 300 0 210 - - - - - - - - - - - - - 0 0-0 0 0 200 220 - - - - - - - - - - - - - 0 0 - - 0 0 200 Maximum distances "" with bars thick 10 mm - E fixed: 1 mm Supports 373 24, 373 Bars 1 bar per poe 2 bars per poe 3 bars per poe 80 x 10 100 x 10 120 x 10 80 x 10 100 x 10 120 x 10 80 x 10 100 x 10 120 x 10 Isc peak (Ipk in kâ) 20 1700 1700 1700 1700 1700 1700 1700 1700 1700 1600 1700 1700 1700 1700 1700 1700 1700 1700 30 1350 1550 1700 1700 1700 1700 1700 1700 1700 35 1150 1300 1450 1700 1700 1700 1700 1700 1700 40 1050 1150 1300 1500 1700 1700 1700 1700 1700 45 900 1050 1150 1350 1550 1700 1700 1700 1700 50 850 950 1050 1200 1400 1550 1600 1700 1700 60 700 800 850 1000 1150 1300 1350 1550 1700 70 600 700 750 900 1000 1100 1150 1300 1500 80 550 600 650 750 900 1000 1000 1150 1300 90 500 550 600 700 800 900 900 1050 1100 100 450 500 550 600 700 800 850 900 950 110 400 450 500 550 650 750 750 800 800 120 350 400 450 550 600 650 700 750 750 130 350 350 400 500 550 600 650 700 700 140 300 350 400 450 500 600 600 650 650 150 300 350 350 450 500 550 550 650 600 160 0 300 350 400 450 500 550 600 500 170 0 300 300 350 450 500 500 500 500 180 0 300 300 350 400 450 500 450 450 190 0 0 300 350 400 450 450 400 400 200 200 0 300 300 350 400 450 400 400 210 200 0 0 300 350 350 400 350 350 220-0 0 300 350 300 350 300 300 230-200 0 300 300 300 300 300 300 240 - - 200 0 300 0 300 0 0 0 - - 200 0 300 0 0 0 0 dditiona support: Horizonta busbars (1) Mounted in addition: - to 2 fixed supports in encosure width 7 et 975 - to fixed support in cabe seeves width 475 Vertica busbars Mounted in addition to 3 fixed supports if necessary (1) In case of fat bar mounting, use fixed support ony n Insuating characteristics EN 60947-1/IEC 60664-1 (degree of poution: 3) Cat.Nos 373 98 374 37 373 96 374 32 374 36 373 10/20 373 21 373 22/23 373 24/ 373 66/67/68/69 Ui (V) 500 500 690 1000 1000 1000 1000 1000 1000 1000 Uimp (kv) 8 8 8 12 12 12 12 12 12 8 262
www.kinkmann.com isoating supports for busbars (continued) n imensions Cat.No 373 98 Side for 12 x 2 mm bar View from above Cat.No 374 37 6.2 53 Cat.No 373 96 Cat.No 374 32 1 12.4 2.5 Side for 12 x 4 mm bar Ø 4.5.5 8.7 Ø 9 8.7 35 75 70 14 83 118 40 110 188 12.4 4.5 17.5 6.2 = = 42 = = Cat.No 374 36 1 Cat.No 373 15 433 Cat.No 373 10 148 40 110 208 400 65 50 50 50 65 40 9 100 0 86 20 270 Cat.No 373 20 Cat.No 373 21 3 328 364 295 40 fixing centre 3 99.5 36.5 fixing centre 3 im. Copper bar 50 x 5 63 x 5 75 x 5 80 x 5 217 230 242 247 Cat.No 373 22 (fixed support) 345 300 40 Cat.No 373 23 (additiona support) 300 40 fixing centre 3 B B Copper bar im. 50 x 5 63 x 5 75 x 5 80 x 5 100x5 112 1 137 142 162 B 126 126 171 171 171 Cat.No 373 24 (fixed support) min. 567 / max. 630 567 B 12.5 94 Cat.No 373 (additiona support) 567 94 Bars thick 5 or 10 mm Cat.Nos im h75 h80 h100 h120 h1 151 156 176 196 201 373 24 B 187,5 192,5 215,5 232,5 237,5 373 151 156 176 196 201 Cat.No 373 66/68 Cat.No 373 67/69 35 B C E F F E 70 99 Ø 6.5 99 35 70 B C 70 199 Ø 6.5 Cat.Nos B C E F 373 66 75 350 330 300 75 75 373 68 1 600 580 550 150 1 373 67 75 350 330 300 75 75 373 69 1 600 580 550 150 1 E F F E 263