2013 Sparta Engineering Inc. Catalogue
Truck Mounted Single Service Rig TMS69-120 API 4f 3rd Edition Yes** Period One legal Yes** Rig Weights (Fully Dressed) Front: 16,800 kg. Rear: 24,000 kg** Capacity 120 000 lb (53,376 dan) Height 69 ft (21 m) Minimum Design Temperature -20 C Carrier Axle Configuration Tandem Steer / Tridem Drive Tires Steer: 445R22.5's Drives:12R22.5's Chassis International Paystar 5900i (other trucks optional) Wheelbase 378 in (Front steer-to-centre drive) Steer axle spread 72 in Transfer Case Fabco PTO-180-23 Mast 69-120 stiff-single Mast Height 69 ft (21 m) API Capacity 120,000 lbs (53,376 dan) on 40lines Free-standing Free-standing or Guyed (with free-stand equipped) Maximum rated design wind velocity 85 mph without setback. 70 mph with setback Drill Line Size 7/8" or 1" Racking Board Height 27 ft (8.23 m) Rod Basket Height 54-3/4 ft (16.69 m) Racking Board Capacity 18,700 dan (21 short tons) Rod Basket Capacity 8,400 dan (9.45 short tons) - Max 1" rods Crown Sheaves 3 of 24" steel sheaves and 1 of 22" steel sheave Well spacing 5 ft (1.52 m) Fall Arrest at Crown Yes Fall Arrest Above Rod Board Yes Central Grease Yes Traveling Block 75-ton Drawworks -- See Drawworks data sheet FAST450 42x10 Band, FAST450DB (2x48in Disc), FAST450LW Drill Line Size 7/8" or 1" Sandline Capacity of 9/16" 10000ft (3048 m) or 5000ft (1524 m) on FAST450LW Sandline Capacity of 1/2" Swaged 12000 ft (3657 m) Features Free-stand Turnbuckles Aluminum Winches 2 on rig deck Man Rider Winch Optional Rod Accelerator Optional Tong Swivel-Mount Optional BOP-Slide (rear-mount) Optional Accumulator Class 2 with Class 3 accommodations ** dependent on rig configuration and equipment 2
Truck Mounted Double Service Rig Note: This service rig has additional services which include: Man Rider Winch, remote monitoring, replacing components, training, manuals, maintenance, etc. Capacity 200 000 lb Height 105 ft Quality Product Specification Requirements Minimum Design Temperature -35 C Carrier Type Tandem Steer/Tri Drive Engine Type Cummins QSL 9 Transmission Allison 4700 OFS Drop Box Namco Substructure Maximum rated static hook load 200 000 lb on 6 lines (890 KN) Maximum rated static hook load 150 000 lb on 4 lines (667 KN) Maximum rated design wind velocity 70 mph Mast Type Guying Single Telescoping Double, Telescoping Triple, Cantilever Triple Free Stand, guying required (internally), mast set-up distance 6 ft Wire Rope Size Sand line 1/2" Swaged Drill line 1 Shaw Standard API 9A Service Rig Tubing Board Pipe Diameter 4.5" Rod Basket Rod Diameter 1" Crown 5 Sheaves 4 sheaves diameter 24" 1 sheave diameter 22" Hydraulic Systems Primary Rig Hydraulics Secondary - Drawworks DW450 Sparta Engineering Inc. Main Drum Braking 42" X 10" band Sandline braking Kobelt air actuated Main drum backup Kobelt Winch (2 Sub frame) Braden BG6B Traveling Equipment Block Size 100 ton Weight 1 ton / 2200 lbs Standard Mckissick API 8A 3
Catwalk Capacity Working mode off Length Width Height Working mode on Length Width Height 25 000 lbs per arm, uniformly distributed load 44 ft. 8 ft. 3.94 ft. 44 ft. 48.59 ft. 3.94 ft. 4
Drawworks Max Input HP Rating Single Line Pull Max Hook with 4- lines Max Hook Load with 6 - lines FAST450 (BAND)/ FAST450DB (DISC) 450 HP / 336 Kw 41 500 lb / 18 400 dan 150 000 lb / 66 720 dan 217 000 lb / 96 500 dan Main Drum Diameter X Width 18 X 36 Wire Line Size 1 or 7/8 Drum Clutch PO324 Drive Chain Triple 100 Brake System Brake Cooling Dual 48 Disc / 42 X 10 Band Auxiliary Brake (optional) 40 (in) Disc Sand line Drum Diameter X Width 12.75 X 36 Drive System Polychain or triple 100 Brake System Single Disc 40 Capacity Capacity 9/16 (in) Wire Rope Weight and dimensions Air 12 000 ft 10 000 ft FAST450 (Band brakes w / Triple 100 Drive Sandline) 6758 kg / 14 900 lb FAST450 DB (Disc brakes w/ Polychain Drive Sandline) 7048 kg / 15 540 lb Length 127.75 Width 105 Height 60.75 Standard Features Main drum chain tensioner Sandline Polychain Tensioner (Polychain Drive) Cable grooving machined in main drum barrel Dual-Output, 3:2 Reducing Right Angle Gearbox Central greasing 5
Mud Tank Fluid Capacity 8384 gallon (32 m 3 ) Length 22.58 ft Width 8.83 ft Height 8.58 ft Material options Frame Materials Requirements QT-100 high strength steel frame (100 kpsi) Decking Type/material Fiber grating upper deck Piping Requirements Suction Line 4" gate valve on suction (Operating Pressure 100 psi) Steam Line 2" Inlet 2" (Operating Pressure 5000 psi) Line Pipe 2" (Operating Pressure 6000 psi. Test certs to be provided; Length required Pipes Pipes Pipes Pipes Valve Type (gate or butterfly) Degasser Options Remote monitoring Handrails (height and style) Tank gage type Lifting Requirements 18 lengths X 20 ft 2 lengths X 10 ft 2 lengths X 6 ft 2 lengths X 4 ft Butterfly valves 4" for each chamber. Equalizer valve between sections and 4 internal valves for each chamber. Box style degasser Inlet feed diameter 2 Available Collapsible Float gage 4 ft. light top of gage board Safety cables - Pipe Racking Requirements: Racking for 240 lengths - 6
Drilling Mud Tank Fluid Capacity 17 926 gallons (81.5 m 3 ) Length Width Height Quality Product Specification Requirements Frame Materials Requirements Decking Type/material Options Remote monitoring Handrails (height and style) Tank gage type Lifting Requirements 61.29 ft 19.69 ft 13.12 ft QT-100 high strength steel frame (100 kpsi) Fiber grating upper deck Available Collapsible Float gage 4 ft. light top of gage board Safety cables - Pipe Racking Requirements: Racking for 240 lengths - 7
Pump Truck Truck Specifications Axles numbers Tandem drive single steer Deck size Length 166.75 Width 102 Live Roll 98.4 Pump Specifications SJ Triplex Plunger Pump Working pressure / flow 11 lb/min-max. Charge pump Bowie 4300 EX charge pump Handrails and stairs Hand Rail Style Collapsible Stair Details Folding stair for access to working deck Winch Tulsa H34 winch Drop Box Chelsea 859XGFJP-85XK Piping requirements Piping Pump Line Diameter 2 Operating Pressure 5000 psi 8
Contact You can reach us at the following three locations: Canada Matt Fox, P. Eng. CEO, Sparta Engineering Inc. matt@spartaengineering.com Linden, Alberta: 702 1st Avenue NW Box 365 Linden AB, T0M1J0 Ph: 403.546.3851 FX: 403.546.2486 Jason Thompson, P. Eng. VP, Sparta Engineering Inc. jason@spartaengineering.com Grand Prairie, Alberta: 9301-102 Street Clairmont, Alberta, T0H-0W0 Ph: 403.546.3851 FX: 403.546.2486 México Ing. Gabriela Ulloa. Manager Mexico, Sparta Engineering Inc. gaby@spartaengineering.com Toluca, México: Carretera México-Toluca Km. 50 A un costado de la VW de Lerma Lerma, México Of: (52) 722 4 89 88 26 Cel.: (52 1) 722 342 05 66 Cel. Canada: 403 804 9420 16