Fabricator 90 90 C DC 230 Power, Performance, Features... and Reliability 5Year * Fabricator 90 comes with: Power cord and plug 0ft (3m), Tweco WeldSkill MIG gun 0ft (3m) work cable and clamp Gas regulator/flowmeter Factory fitted gear/ single cylinder rack.023 -.030 /.035 reversible drive roll Lifting point Overload Protection! Shuts down the power source to protect the internal electrical components from overheating. Heavy Duty Transformer! The transformer is built to last using premium quality 428 F materials and fully dip varnished then baked for 4 hours. Quick Specifications Processes MIG () Flux Cored () Industrial Applications Maintenance and Repairs Sheet Metal Fabrication Farm/Ranch Auto Body Repair Home DIY Hobbyist Rated Output 90 Amp at 23.4, 5% Duty Cycle 45 Amp at 22, 30% Duty Cycle Max. Open Circuit oltage 60 DC Amperage Range 30-90 Amp Wire Feed Speed 80-700 IPM (2-8 m/min) Weight 28 lb (58 kg) Order Information Part No: W00500 Description: Fabricator 90 208/230//60 * Limited warranty, refer to warranty schedule. NEW 8 oltage Taps! Providing a wider operating range of 20 to 90 amps with a smooth and stable arc characteristic. Unbeatable performance from 22 gauge to 5/6 (7.9mm) thick in a single pass. Simple Operation! Just refer to our comprehensive weld set up guide for optimum welding performance over a wide range of materials and shielding gases. Higher Output! The Fabricator 90 punches out 90 amp maximum output. Quick Change Polarity! Simple, quick change (no tools required) polarity from the front of the power source. 33 lb/44 lb Spool Capacity! Wire compartment design allows easy installation of 44 lb, 33 lb, 0 lb, 8 and 2 wire spool sizes. Metal Feed Plate! The metal wire drive system features 2 roll drive system, quick change reversible drive rolls and easy-to-set single scaled wire tension knob. Easy To Use Cylinder Rack! Single cylinder rack allows easy roll on loading of the gas cylinder. Spot Timer Kit! Adds a unique spot weld feature to give an accurately controlled spot time when spot welding. ISO 900 Quality System! The certified quality management system guarantees the manufacture and distribution processes of this product. Brilliant Characteristics! Extremely smooth arc and negligible spatter using a wide range of gases, materials and material thicknesses. New Gun! Quality Tweco WeldSkill MIG gun. Tel: 800 255 5846 Tel: 905 827 Tel: 905 827 9777 Fabricator 90 Fax: 800 332 0946 Fax: 905 827 083 Fax: 905 827 9797 Form No.: 84-266
Fabricator 90 90 C DC 230 Features # Cylinder stand allows easy loading for cylinder Easy installation wire spool compartment Burnback control The 2 roll wire drive system with quick change drive rolls & single tension knob Our welding set-up chart explains how to produce an excellent weld start point TWECO No. 4 gun connection Fully varnished and baked mains transformer provides trouble free service #Subject to change without notification. Tel: 800 255 5846 Tel: 905 827 Tel: 905 827 9777 Fabricator 90 Fax: 800 332 0946 Fax: 905 827 083 Fax: 905 827 9797 Form No.: 84-266
Fabricator 90 90 C DC 230 Specifications # Welding DC Maximum output 90 Amp Duty cycle @ 04 F 5% @ 90 Amp at 23.4 Output at 30% Duty Cycle @ 04 F 45 Amp at 22 Current Range Number of oltage Settings 8 Welding oltage Range 30-90 Amp 5.8-25 olt Maximum Plate Thickness 5/6 (7.9mm) Wire Diameter Range Mild Steel:.023 -.035 (0.6-0.9mm) Stainless Steel:.023 -.035 (0.6-0.9mm) Aluminum:.030 -.035 (0.8-0.9mm) Flux cored:.030 -.045 (0.8 -.2mm) Fitted Feedroll Suits MIG Wire.023 -.030 /.035 (0.6-0.8/0.9mm) Warranty Period 5 Years* Approvals CSA (Pending) IEC 60974- (CE) Primary Power Primary oltage 230 olt Supply Plug NEMA 6-50P Rated ka @ 90 Amp 7.9 ka Lead cord length 0ft (3m) Maximum Input Current 34 Amp MIG Guns Gun Type 200 Amp TWECO WeldSkill Gun Length 0ft (3m) Part Number 027 Nozzle Part No: 2-50 Size: /2 (2.7mm) Contact Tip Part No: -30 Size:.030 (0.8mm) Diffuser Part No: 5 Liner Part No: 42-3035-5 Size:.030 -.035 (0.8-0.9mm) Dimensions & Weight Dimensions HxWxD 33 x 6.3 x 32.7 (838x44x866mm) Weight 28 lb (58 kg) Process Capabilities # Process Electrode Wire Electrode Polarity Shielding Gas Min Thickness **Max Thickness MIG ().023,.030,.035 Mild Steel (0.6, 0.8, 0.9mm) DC+ Autocraft 70S-6 MIG ().023,.030,.035 Stainless Steel (0.6, 0.8, 0.9mm) DC+ CO 2 (00%) or 22 gauge 5/6 Argon/CO 2 (0.8mm) (7.9mm) Argon/CO 2 or 20 gauge 5/6 Tri-Mix (.0mm) (7.9mm) MIG ().030,.035 8 gauge 5/6 Aluminum (0.8, 0.9mm) DC+ Argon (00%) (.2mm) (7.9mm) Flux Cored.030,.035,.045 8 gauge 5/6 Self Shielded (0.8, 0.9,.2mm) DC- N/A (.2mm) (7.9mm) Mild Steel * Limited warranty, refer to warranty schedule. # Subject to change without notification. **Maximum thickness in a single pass. Tel: 800 255 5846 Tel: 905 827 Tel: 905 827 9777 Fabricator 90 Fax: 800 332 0946 Fax: 905 827 083 Fax: 905 827 9797 Form No.: 84-266
Fabricator 90 90 C DC 230 Key Control # 2 3 4 5 6 7 8. Illuminated power switch 2. Over temperature indicator lamp 3. Wire speed control 4. Weld mode switch 5. Spot time control 6. Welding gun connection 7. Welding gun trigger connection 8. oltage step control Optional MIG Guns # Tweco Spraymaster 250 MIG Gun Part No. MS20-3545 0ft (3m) Part No. MS22-3545 2ft (3.6m) The 250 Amp Tweco SprayMaster is the coolest MIG gun for your hottest spray welding applications. Rated at 80% duty cycle using Argon/CO 2. #Subject to change without notification. Tweco No. 2 MIG Gun Part No. 20-3035 0ft (3m) Part No. 22-3035 2ft (3.6m) Tweco No. 2 is the professional s choice MIG gun. It s rated at 250 Amp at 60% duty cycle using CO 2 gas. Tel: 800 255 5846 Tel: 905 827 Tel: 905 827 9777 Fabricator 90 Fax: 800 332 0946 Fax: 905 827 083 Fax: 905 827 9797 Form No.: 84-266
Fabricator 90 90 C DC 230 200 Amp TWECO WeldSkill MIG Gun # Part No. 027 Item Part No. Description Qty 2-50 Nozzle 2-30 Contact Tip 3 5 Gas Diffuser 4 WM50J-50 Conductor Tube 5 WM9 Trigger 6 TA-80 Handle Assembly 4 3 5 6 2 Contact Tips -23.023 (0.6mm) -30.030 (0.8mm) -35.035 (0.9mm) -40.040 (.0mm) -45.045 (.2mm) Nozzles 2-37 3/8 (9.5mm) 2-50 /2 (2.7mm) 2-62 5/8 (6mm) Conduits 42-23-5.023, 5ft (7.6m) 42-3035-5.030 -.035, 5ft (4.5m) 42-4045-5.040 -.045, 5ft (4.5m) 42N-3545-5.035-3/64, 5ft (4.5m) #Subject to change without notification. Tel: 800 255 5846 Tel: 905 827 Tel: 905 827 9777 Fabricator 90 Fax: 800 332 0946 Fax: 905 827 083 Fax: 905 827 9797 Form No.: 84-266
Fabricator 90 90 C DC 230 Ordering Information EQUIPMENT OPTIONS PART NO. DESCRIPTION QTY PRICE Fabricator 90 Package W00500 Fabricator 90, Tweco Weldskill MIG gun, 2 roll wire feed system, single cylinder rack, 6ft (.8m) gas hose, gas regulator/flowmeter, 0ft (3m) work lead GUNS Tweco WeldSkill 0ft 027 Gun assembly with 0ft cable (supplied with package), 200 Amp @ 30% Tweco No. 2 0ft 20-3035 Gun assembly with 0ft cable, 250 Amp @ 60%; gun lead MSAK-354 required Tweco No. 2 2ft 22-3035 Gun assembly with 2ft cable, 250 Amp @ 60%; gun lead MSAK-354 required Spraymaster 0ft MS20-3545 Gun assembly with 0ft cable, 250 Amp @ 80% Spraymaster 2ft MS22-3545 Gun assembly with 2ft cable, 250 Amp @ 80% ACCESSORIES MIG gun control lead & 4 pin plug MSAK-354 Connection lead between TWECO MIG guns & Fabricator 90 ictor Regulator/Flowmeter Mixed Gases 078-2723 Medalist 400 Series, HRF Flowmeter Regulator, Argon-Argon/CO2 mix gases ictor Regulator/Flowmeter CO2 078-2725 Medalist 400 Series, HRF Flowmeter Regulator, CO2 gas Helmet/Gloves CONSUMABLES Drive Roll.023 -.030 /.035 (0.6-0.8/0.9mm) 7977036 grooved for hard wire Drive Roll.035 -.045 (0.9-.2mm) 7977660 grooved for hard wire Drive Roll.030 -.035 (0.8-0.9mm) 797773 U grooved for soft wire Drive Roll.040 -.045 (.0-.2mm) 7977264 U grooved for soft wire Drive Roll.030 -.035 (0.8-0.9mm) 7977732 grooved knurl for cored wire Drive Roll.045 -./6 (.2-.6mm) 704277 grooved knurl for cored wire Contact Tips Gas Diffusers Nozzles Conduits Filler Metals Shielding Gas TOTAL QUOTE PRICE Tel: 800 255 5846 Tel: 905 827 Tel: 905 827 9777 Fabricator 90 Fax: 800 332 0946 Fax: 905 827 083 Fax: 905 827 9797 Form No.: 84-266