G11-N90 SAE FLANGE REPLACEMENT O-RINGS G11-N90-210 8 0.57 0.38 10 G11-N90-214 12 0.54 0.36 10 G11-N90-219 16 0.75 0.49 10 G11-N90-222 20 0.90 0.62 10 G11-N90-225 24 1.10 0.76 10 G11-N90-228 32 1.30 0.88 10 G11-N90-232 40 1.70 1.10 10 G11-N90-237 48 3.10 2.06 10 0011 O-RING BOSS REPLACEMENT O-RINGS 0011-02 0.15 0.11 10 0011-03 0.20 0.14 10 0011-04 0.21 0.15 10 0011-05 0.25 0.18 10 0011-06 0.31 0.22 10 0011-07 0.32 0.23 10 0011-08 0.32 0.23 10 0011-10 0.42 0.30 10 0011-12 0.48 0.34 10 0011-13 0.48 0.34 10 0011-14 0.63 0.45 10 0011-16 0.73 0.52 10 0011-20 0.98 0.70 10 0011-24 1.15 0.83 10 0011-32 1.50 1.10 10 00026 O-RINGS FOR BSP RECESSED PORT ADAPTERS 00026-04 0.15 0.10 10 00026-06 0.20 0.15 10 00026-08 0.20 0.15 10 00026-10 0.25 0.20 10 00026-12 0.25 0.20 10 00026-16 0.25 0.20 10 00026-20 0.25 0.20 10 00026-24 0.25 0.20 10 Note: These O-Rings are used with the metal retaining ring found on some BSP Male Adapters. 00026CS O-RINGS FOR BSP CONE SEAL 00026CS-04 0.15 0.10 10 00026CS-06 0.15 0.10 10 00026CS-08 0.20 0.15 10 00026CS-10 0.25 0.20 10 00026CS-12 0.25 0.20 10 Accessories 00036 BSP BONDED SEALS 00036-02 1.10 0.90 10 00036-04 1.40 1.10 10 00036-06 1.50 1.20 10 00036-08 1.60 1.30 10 00036-10 1.90 1.50 10 00036-12 2.30 1.80 5 00036-16 3.00 2.40 5 00036-20 3.60 2.90 2 00036-24 4.10 4.10 1 00036-32 14.00 14.00 1 Note: These bonded seals are a single unit that replaces the standard o-ring plus retaining ring. 00073 METRIC BONDED SEALS 00073-06 1.80 1.45 10 00073-08 1.40 1.10 10 00073-10 1.40 1.10 10 00073-12 1.50 1.20 10 00073-14 1.50 1.20 10 00073-16 1.60 1.30 10 00073-18 1.80 1.40 5 00073-20 1.90 1.50 5 00073-22 2.30 1.80 5 00073-24 3.10 2.50 5 00073-26 3.40 2.70 2 00073-30 4.10 3.30 2 00073-33 4.40 3.50 2 00093 O-RING FACE SEAL REPLACEMENT O-RINGS 00093-04 0.22 0.16 10 00093-06 0.22 0.16 10 00093-08 0.28 0.20 10 00093-10 0.28 0.20 10 00093-12 0.34 0.24 10 00093-16 0.43 0.31 10 00093-20 0.60 0.43 10 00093-24 1.00 0.72 10 00026CS-16 0.25 0.20 10 00026CS-20 0.25 0.20 10 00026CS-24 0.25 0.20 10 Note: PULSAR female BSPP crimp fittings incorporate an o-ring in the cone for improved sealing. These are the replacement o-rings. 67
Accessories G11KIT G11KIT-N70 39.50 G11KIT-N90 59.90 Both kits contain 382 assorted nitrile 70 durometer or 90 durometer o-rings in 30 different sizes. The 70 durometer o-rings are suitable for general automotive and industrial applications. Specify N90 for high pressure hydraulic applications. 0011KIT ORB BOSS O-RING KIT 0011-KIT 39.90 Contains 250 assorted 90 durometer o-rings for o-ring boss connections in sizes -04 to -16 00093KIT O-RING FACE SEAL KIT 00093-KIT 31.20 Contains 155 assorted 90 durometer o-rings for o- ring face seal connections in sizes -04 to -24. G6 VINYL COATED SUPPORT CLAMPS G6-04 1.90 1.50 10 G6-06 1.50 1.20 10 G6-07 1.50 1.20 10 G6-08 1.10 0.90 10 G6-09 1.10 0.90 10 G6-10 1.10 0.90 10 G6-11 1.10 0.90 10 G6-12 1.10 0.90 10 G6-13 1.40 1.10 10 G6-15 1.40 1.10 10 G6-16 1.90 1.55 10 G6-17 2.30 1.80 10 G6-18 2.40 1.90 10 G6-19 2.40 1.90 10 G6-20 2.70 2.20 10 G6-21 3.90 3.20 10 G6-24 2.90 2.40 10 G6-25 3.60 2.90 10 G6-28 4.10 3.30 10 G6-29 6.20 5.00 10 G6-32 5.20 4.20 10 G6-33 6.30 5.10 10 G6-36 4.60 3.70 10 G6-44 4.80 3.90 10 G6-46 6.50 5.20 10 G6HD HEAVY DUTY SUPPORT CLAMPS FOR TUBING G6HD-3-025 9.35 G6HD-3-038 9.35 G6HD-3-050 9.35 G6HD-3-063 9.35 G6HD-4-075 10.40 G6HD-4-100 10.40 G6HD-5-125 11.25 G6HD-5-150 11.25 G6HD-6-200 25.00 G6HD HEAVY DUTY SUPPORT CLAMPS FOR PIPE G6HD-3-054 9.35 G6HD-3-067 9.35 G6HD-4-084 10.40 G6HD-4-105 10.40 G6HD-5-131 11.25 G6HD-5-166 11.25 G6HD-6-190 25.00 G6HD-6-238 25.00 G6N RUBBER CUSHIONED SUPPORT CLAMPS G6N-04 0.33 0.27 10 G6N-06 0.35 0.29 10 G6N-08 0.38 0.31 10 G6N-10 0.42 0.33 10 G6N-12 0.47 0.38 10 G6N-14 0.50 0.40 10 G6N-16 0.55 0.42 10 G6N-18 0.80 0.65 10 G6N-20 0.90 0.75 10 G6N-24 1.03 0.85 10 G6N-28 1.15 0.95 10 G6N-32 1.60 1.30 10 68
G38 DOUBLE BOLT CLAMPS G38-075 4.30 1 G38-100 6.90 1 G38-125 7.20 1 G38-150 7.30 1 G38-200 8.90 1 G38-250 9.40 1 G38-300 10.20 1 G9 PROTECTIVE CAP PLUGS G9-01 0.23 0.15 100 G9-02 0.23 0.15 100 G9-03 0.23 0.15 100 G9-04 0.23 0.15 100 G9-04X 0.26 0.17 100 G9-05 0.26 0.17 100 G9-05X 0.26 0.17 100 G9-06 0.26 0.17 100 G9-06X 0.26 0.17 100 G9-07 0.29 0.19 100 G9-07X 0.29 0.19 100 G9-08 0.29 0.19 100 G9-08X 0.29 0.19 100 G9-09 0.29 0.19 100 G9-09X 0.29 0.19 100 G9-10 0.33 0.22 100 G9-11 0.33 0.22 100 G9-11X 0.36 0.24 100 G9-12 0.39 0.26 100 G9-12X 0.39 0.26 100 G9-13X 0.45 0.30 100 G9-14 0.48 0.32 100 G9-14X 0.48 0.32 100 G9-15X 0.48 0.32 100 G9-16 0.60 0.40 100 G9-17X 0.60 0.40 100 G9-18 0.65 0.43 100 G9-19 0.71 0.47 100 G9-21 0.81 0.54 100 G9-240 1.40 0.94 10 G9-250 1.40 0.94 10 G9-300 1.50 1.10 10 G9-400 2.50 2.00 10 0500P PLASTIC TEAR OFF JIC CAPS 0500P-04 0.18 0.13 100 0500P-06 0.18 0.13 100 0500P-08 0.22 0.13 100 0500P-10 0.22 0.16 100 0500P-12 0.31 0.22 100 0500P-16 0.35 0.25 100 Accessories 0800P PLASTIC TEAR OFF NPT PIPE CAPS 0800P-04 0.15 0.10 100 0800P-06 0.15 0.10 100 0800P-08 0.25 0.20 100 0800P-12 0.30 0.22 100 0800P-16 0.35 0.25 100 0800P-20 0.40 0.30 100 1500P PLASTIC THREADED JIC PLUGS 1500P-04 0.28 0.20 100 1500P-05 0.29 0.21 100 1500P-06 0.29 0.21 100 1500P-08 0.30 0.22 100 1500P-10 0.30 0.22 100 1500P-12 0.30 0.22 50 1500P-16 0.55 0.39 25 1500P-20 3.35 2.40 10 1500P-24 3.35 2.40 10 93000P PLASTIC ORFS CAP 93000P-04 0.30 0.22 100 93000P-06 0.36 0.26 100 93000P-08 0.60 0.50 100 93000P-10 0.65 0.55 100 93000P-12 0.65 0.55 100 93000P-16 1.10 0.80 100 93000P-20 2.25 1.60 100 NAS NYLON ABRASIVE SLEEVE Cut 50ft Bulk NAS-082 1.90 1.40 1.10 300 NAS-100 2.10 1.60 1.30 300 NAS-113 2.25 1.70 1.40 300 NAS-125 2.50 1.90 1.50 300 NAS-158 2.90 2.20 1.80 300 NAS-178 3.25 2.40 1.90 300 NAS-191 3.80 2.90 2.30 300 NAS-206 4.00 3.00 2.40 300 NAS-218 4.20 3.20 2.60 300 NAS-238 4.50 3.40 2.70 300 NAS-254 5.20 3.90 3.10 300 NAS-293 7.00 5.30 4.20 300 NAS-334 7.20 5.40 4.30 300 PUBS BLACK SMOOTH POLYURETHANE ABRASION SLEEVE PUBS-088 3.30 2.60 30 PUBS-100 3.80 3.00 30 PUBS-113 4.40 3.50 30 PUBS-125 4.90 3.90 30 PUBS-138 5.40 4.30 30 PUBS-163 5.60 4.50 30 0500PT PLASTIC THREADED JIC CAPS 0500PT-04 0.25 0.20 100 0500PT-05 0.25 0.20 100 0500PT-06 0.25 0.20 100 0500PT-08 0.30 0.25 100 0500PT-10 0.35 0.25 100 0500PT-12 0.45 0.30 50 0500PT-16 0.70 0.50 25 0500PT-20 0.95 0.70 10 0500PT-24 1.10 0.80 10 69
Accessories PUYS YELLOW SMOOTH POLYURETHANE ABRASION SLEEVE PUYS-100 3.10 2.50 30 PUYS-138 4.20 3.40 30 PBIN PULSAR BIN BOX PBIN-4 1.25 50 PG PLASTIC HOSE GUARD PG-025 2.20 1.50 25 PG-038 2.30 1.60 25 PG-050 3.00 2.10 25 PG-063 3.50 2.40 25 PG-075 5.90 4.10 25 PG-100 5.90 4.10 25 PG-138 10.40 7.10 25 PG-150 12.10 8.30 25 PG-188 12.10 8.30 25 HYDRAULIC OIL AW-22 AW-32 AW-46 AW-68 ES-46 Please inquire for market pricing PGH HEAVY POLYETHYLENE HOSE GUARD PGH-050 2.50 2.00 100 PGH-075 3.30 2.60 100 PGH-100 4.70 3.70 100 PGH-125 5.90 4.70 100 PGH-150 7.10 5.70 100 PGH-200 9.20 7.40 50 PGH-300 13.90 11.10 50 PGH-400 19.90 15.90 30 PGH-600 29.50 23.60 20 SG STEEL SPRING HOSE GUARD SG-063 3.90 2.60 20 SG-075 4.10 2.70 20 SG-088 4.80 3.40 20 SG-100 6.30 4.30 20 SG-118 10.10 7.00 20 SG-131 7.50 5.30 20 SG-163 9.60 6.60 20 SG-213 11.10 7.70 20 SG-238 17.20 11.90 20 TSG TAPERED SPRING GUARDS TSG-063 3.20 Note: 1. When purchasing oil by the bucket or pail, please be aware that there are two different sizes, depending on where they are packaged. The sizes are 18.9 litres (5 US gallons) or 20 litres. The Canadian measure contains 5.8% more oil! 2. Oil prices often exclude ECO fees. Check for extra charges when you compare prices. PULSAR oil prices always include ECO fees where applicable. CB CUT-OFF SAW BLADES CBB-7 7 Bevelled (for wire braid hoses) 265.00 CBB-8 8 Bevelled (for wire braid hoses) 277.00 CBB-10 10 Bevelled (for wire braid hoses) 429.00 CBS-7 7 Scalloped (for braided and multi-spiral) 434.00 CBS-8 8 Scalloped (for braided and multi-spiral) 454.00 CBS-10 10 Scalloped (for braided and multi-spiral) 625.00 TPG & BR PLASTIC STRAIN RELIEVERS TPG-530 5.95 4.10 10 TPG-625 5.95 4.10 10 TPG-725 5.95 4.10 10 TPG-835 9.90 9.20 10 CB-7 CB-10 BR-069 0.90 0.75 10 BR-069R 0.90 0.75 10 CBS-7 CBS-10 70
Part Number PULSAR HYDRAULIC CRIMPERS D105M D165M D205M PRICE EACH Part Number Equipment PRICE EACH STE EXTERNAL SKIVING TOOLS ST5904-04 $ 227.90 ST5904-06 227.90 ST5904-08 227.90 ST5904-10 238.50 ST5904-12 238.50 ST5904-16 238.50 ST5904-20 274.50 ST5904-24 274.50 ST5904-32 280.20 ST8604-12 238.50 ST8604-16 238.50 ST8604-20 274.50 ST8604-24 274.50 ST8604-32 274.50 P32M D105M $ 7,017.00 110 volt 35 ton crimper supplied with digital caliper set and 7 die sets (16mm red, 19mm yellow, 22mm blue, 26mm brown, 30mm purple, 34mm green, 42mm silver) D165M 7,208.00 110 volt 65 ton crimper supplied with digital caliper set and 7 die sets (16mm red, 19mm yellow, 22mm blue, 26mm brown, 30mm purple, 34mm green, 42mm silver) D205M 9,402.00 220 volt 80 ton crimper supplied with digital caliper set and 9 die sets (16mm red, 19mm yellow, 22mm blue, 26mm brown, 30mm purple, 34mm green, 39mm black, 47mm silver, 50mm orange) P32M P.O.R. (available in many power and dies configurations, please contact PULSAR for pricing) DIE SETS FOR D105M & D165M CRIMPERS D105M-DIE(size) 330.00 Specify size in millimeters at time of ordering. Choose from 08, 10, 12, 14, 16, 19, 22, 26, 30, 34, 39, 42, 50 DIE SETS FOR D205M CRIMPERS D205M-DIE(size) 480.00 Specify size in millimeters at time of ordering. Choose from 08, 10, 12, 14, 16, 19, 22, 26, 30, 31, 32, 34, 39, 42, 47, 50 CS HYDRAULIC HOSE CUT-OFF SAWS Cut off saws are available with a variety of motors and blades Model HP Phase Voltage Max. Blade type Hose size CS-7 1 1 115 1 1 / 4 7 Bevelled $ 1,707.00 1 1 115 1 1 / 4 7 Scalloped 1,831.00 1.5 1 115 1 1 / 4 7 Bevelled 1,861.00 1.5 1 115 1 1 / 4 7 Scalloped 1,986.00 2 1 230 1 1 / 4 7 Bevelled 1,963.00 2 1 230 1 1 / 4 7 Scalloped 2,073.00 CS-8 1.5 1 115 1 1 / 2 8 Bevelled $ 1,949.00 1.5 1 115 2 8 Scalloped 2,083.00 2 1 230 1 1 / 2 8 Bevelled 2,152.00 2 1 230 2 8 Scalloped 2,306.00 1.5 DC 12 1 1 / 2 8 Bevelled 2,648.00 1.5 DC 12 2 8 Scalloped 2,795.00 CS-10 3 1 230 2 10 Bevelled 5,605.00 3 1 230 2 10 Scalloped 5,838.00 3 3 230 2 10 Bevelled 4,827.00 3 3 230 2 10 Scalloped 5,060.00 ST SKIVING TOOL ACCESSORIES STB STH STB Blade $ 72.30 STH Handle 85.60 71
Equipment HOSEREEL 7 In an effort to reduce packaging, and its effect on the environment, we offer a hose storage and dispensing rack. The HOSEREEL7 conveniently handles seven of your most popular coiled lengths of hose without the need for wooden or plastic disposable reels. You can purchase hose in smaller quantities to increase your inventory turns, and you save the cost of breaking down the empty reel and sending it to a landfill. Trays pivot out as shown for easy reloading. Each tray will hold 80 Kg (176 lb) of hose. REELRACK 8 In answer to requests for reel holding equipment we now offer a mobile reel stand. This simple, robust unit is constructed using 1-1/2" square steel tube and comfortably holds a minimum of 8 reels of hydraulic hose. For easy movement and storage away from cutting and coupling equipment, the unit is supplied with two fixed and two rotating lockable casters. Reels are easily changed, without pinched fingers, by inserting the lifting rod through the steel tube reel supports, and lifting the reel from the outsides of the frame. DIMENSIONS: WEIGHT: COIL SIZE: 50" wide x 40" deep x 88" high 148 kg (326 lb) 10" Minimum inside diameter 40" Maximum outside diameter DIMENSIONS: 35" wide x 35" deep x 92" high (without reels) PULSAR DIGITAL CALIPER Caliper 6" Digital Caliper $ 60.00 72