Everything you need with one simple phone call! 1-888-994-0303 Sales, Service, and Installation Here s Your Packages for the Ford 150 Approved Factory Factory Required Easy Button Printed Jan 2016
www.englishcollisionequipment.com 1-888-994-0303 Package Catagories 1. Weld Stations... 3 2. Hand Tool Kit...4-5 3. Pulse Mig Welders... 6-7 4. Fume Extractors...,... 8 5. Rivet Gun... 8 6. Vac Systems... 9 7. Curtains... 10 Order Form... 11 Instructions: Page 3...Shows three options of Weld Stations to choose from (pick one) Page 4 & 5...Shows you everything that is included in the Ford approved hand tool kit Page 6 & 7...Shows three options for Pulse Welders (pick one) Page 8...Shows Fume Extractor and Rivet Gun options Page 9...Shows two options for Vac Systems (pick one) Page 10...Shows Curtain options - pricing will vary and does NOT include installation Page 11 & 12...The step by step order form. * Fill both sides out and fax both sides to number listed. Orders will NOT be processed without all information filled out. Signature approves order. Please Note: The prices in this publication may change due to manufactures price increases. 2
1. Weld Stations Weld Station Eas yp As aymen lo ts $17 w as 4m o* Weld Station Utility station with 110v & air outlets Weld Station: The Weld Station is designed to meet all of your aluminum repair needs. The station includes a portable welding cart, accessories for aluminum dent pulling, and the AL-5 Capacitor Discharge Stud Welder. The welding cart includes a tool board, utility panel (air outlets, 110V electrical outlets), a work surface covered with a high quality textured rubber mat, heavy duty adjustable shelves, and a sliding drawer for storage. The AL-5 is designed for aluminum dent pulling and welding UHSS panels. Weld Station Weld Station Features: Weld Station Pull bar with Jaw Clamps SP-1 Pulse MIG (Optional) $341 mo* $12,775 Weld Station + = SP-1 Pulse MIG (Optional) SP-1 Pulse MIG (Optional) $16,305 1 + AL-5 Stud Welder Kit 1 SP-1 Part # MWSALK2 Kit 2 Includes: Weld Station AL-5 SP-1 Smart MIG AL-5 Stud Welder Built-In Fume Extractor Stud We AL-5 Kit 2Capacitor D = Dent Pul Also Welds Steel St Sliding Welds Studs with ve Stud gun with trigger Auto Detects the lin Easy to Use + AL-5 Capacitor Discharge Stud Welder 2 1 $268 mo* 1 Weld S TheCool Weld S Gel aluminum repair need Pro pull cart, accessories for a Capacitor Discharge 3 Heat Gun a tool board, utility pa hammers outlets), a work surfac Weld Station rubber mat, heavy du The Weld Station is designed meet allthe of your fortostorage. AL-5 Infrared a portable weld Thermometer Single aluminum repair needs. The station includes welding UHSS panels Grinder Pull cart, accessories for aluminum dent pulling, and the AL-5 Capacitor Discharge Stud Welder. The welding cart include a tool board, utility panel (air outlets, 110V & 220V electrical Part # MWSAL - Weld Station a work surface covered with a high quality textured outlets), Includes: rubber mat, heavy duty adjustable shelves, and a sliding dra M4 Studs Pull Washers Weld Station for storage. The AL-5 is designed for aluminum dent pulling 50 each 12 each $8,365 AL-5 Capacitor welding UHSS panels. Part # MWSAL Weld Station As Shown: Part # MWSALK1 Kit 1 Includes: Weld Station AL-5 Stud Welder SP-1 Smart MIG AL-5 stud welder Dent Pulling This is stand alone unit, Also Welds Steel Studs for UHSS Fume Extractor built in Drawer Welds StudsSliding with very little heat on Kit 2 (See pic to left) Auto Detects the line voltage between 110-240VAC Easy to Use Easy as 1-2 - 3: 2 3 Sliding Drawer 2 3 Stud Dent Pulling 3
2. Hand Tool Kit 2. Hand Tool Kit Everything you will need to work on! $3,795 Ford Tool Kit Content Includes: (1) 6 Full Drawer Professional Cart (1) File Belt Sander (2) Abrasive File sanding belt (1) Door Hemming Chisel/Closer (1) Crimping Tool, Door Hem Flange (1) Air Power Riveter for Blind/Hemlock rivets (1) 7 Piece Hammer & Dolly Set (1) Adjustable File Holder (1) Standard 14 Body File (1) Left Hand 10 Aviation Tin Snips (1) Right Hand 10 Aviation Tin Snips (2) J Type Axial Clamp (2) LL Type Axial Clamp Shallow (2) JJ Type Axial Clamp Deep (2) L Type Axial Clamp (2) W Type Axial Faced Clamp (2) Jaw Holding Clamp (2) C Clamp Short Reach (2) C Clamp Long Reach (2) C Clamp Jaw (2) Straight Jaw Locking Pliers Small (2) Straight Jaw Locking Pliers Large (3) CryoCobalt Drill Bit 1/4 (3) CryoCobalt Drill Bit 5/16 (3) CryoCobalt Drill Bit 3/8 (1) Rivet hole deburring tool (1) Metal Thickness gauge tool (1) Cleco Pliers with Grip (12) KHD Long Reach Spring Cleco ¼ (0-1/2 ) (1) ACAT 4X Rivet Gun (1) Bucking Bar (1) Rivet Gun Knockout Punch ¼ (1) Flush Set New 1 x 2 ¼ $95 mo* Sunex Full Drawer Professional Duty Service Cart Ships fully assembled 6 drawers with locking top bin 5 x 2 heavy duty casters: 2 locking Heavy duty 18 gauge (1.2mm) steel construction Full extension roller bearing drawer slides Locking top with gas shocks to raise and support lid Eva foam liners in all drawers for added protection Durable powder coat finish Lockable top bin 19.75W x 34 L x 5 D - (Top bin inside tray: 18.75W x 29 L) Top 3 drawers 18.75 W x 29.25 L x 3 D Drawers 4 and 5 18.75 W x 29.25 L x 4 D Bottom Drawer 18.75 W x 29.25 L x 5 D For more information visit: www.certifymyshop.com 4
Door Hemming Chisel/Closer 7 Piece Hammer & Dolly Set 2. Hand Tool Kit Crimping Tool, Door Hem Flange Adjustable File Holder Air Power Riveter for Blind/ Hemlock rivets Standard 14 Body File Left Hand 10 Aviation Tin Snips Right Hand 10 Aviation Tin Snips J Type Axial Clamp LL Type Axial Clamp Shallow JJ Type Axial Clamp Deep L Type Axial Clamp W Type Axial Faced Clamp Jaw Holding Clamp C Clamp Short Reach C Clamp Long Reach C Clamp Jaw Straight Jaw Locking Pliers Small Straight Jaw Locking Pliers Large Cryo Cobalt Drill Bits 1/4-5/16-3/8 Rivet hole deburring tool Metal thickness gauge tool Cleco Pliers with Grip KHD Long Reach Spring Cleco ¼ ACAT 4X Rivet Gun Installation Tool Bucking Bar Rivet Gun Knockout Punch ¼ Flush Set New 1 x 2 ¼ File Belt Sander Abrasive file sanding belts y re 5
3. Pulse Mig Welders SP-5 Smart Mig Welder Features: Smart Software software changes to correct weld settings and gas automatically Adjustable hot start and arc force Pre-set synergic curves Customizable weld settings Anti-sticking Ergonomic boom with torch storage and weld helmet hooks 5 different torches:»» Steel» Silicon-Bronze» TIG attachment» MMA (Stick) 3 MIG Spools Most practical Mig Welder on the market! *$186 mo* The SP-5 Smart Mig is a 220VAC/30A Single Phase MIG Welder. It uses pulse technology for welding on and Stainless Steel. It also comes with a TIG torch and stick (MMA) electrode torch, so you have 5 different welders in one. $8,895 The SP-5 has 3 dedicated MIG wire spools (, Silicon Bronze and Steel) and 3 torches for each material so no need to switch spools or torches when welding different materials. The software is smart, just grab the desired torch, click the trigger once and the software changes to the correct weld settings and gas automatically. 3 MIGs 1 IN APPROVED 0.8mm Hood Easy to Use: Auto Switching Software Built-in Synergic Programs No Bulky Spool Gun or Push Pull Systems TIG MMA (Stick) Steel Silicon B ronze 6
3. Pulse Mig Welders Steel Silicon Bronze SP-2 Smart Mig Pulse Welder $6,260 The SP-2 Smart Mig is a 220VAC/30A Single Phase MIG Welder. It uses pulse technology for welding on and Stainless Steel. The SP-2 has 2 dedicated wire spools (, Silicon Bronze or Steel) and 2 torches. Change between Silicon Bronze or Steel by changing the wire spool. The software is smart, just grab the desired torch click the trigger once and the software changes to the correct weld settings and gas automatically. Steel 2-MIG Spools 2 Weld Torches Pre-set Synergic Curves Customizable Weld Settings Heavy Duty Gas Bottle Bracket $132 mo* Silicon B ronze MIGs 2 IN1 Ideal for repair. Photo of 0.8mm thick weld I-CAR test. Easy to Use: Auto Switching Software Built-in Synergic Programs No Bulky Spool Gun or Push Pull Systems The SP-1 Pulse Mig is a 220VAC/30A Single Phase MIG Welder. It uses pulse technology for welding on and Stainless Steel. It also comes with a stick (MMA) electrode torch. Optional Cart Available $104 mo* SP-1 Pulse Mig Welder $4,155 0.8mm Hood ULTRA PORTABLE MIG TIG MMA (Stick) 1-MIG Spool 1 Weld Torch 1 MMA/Stick Electrode Torch Pre-set Synergic Curves Customizable Weld Settings Anti-Sticking Adjustable hot start and arc force TIG (Optional) MMA (Stick) Steel Silicon B ronze The SP-1 has 1 wire spool that can be used for, Silicon Bronze or Steel. 7
Fume Extractor 4. Fume Extractor and 5. Rivet Gun Features: The Pro Spot line of Fume Extractors is designed to remove harmful welding fumes in a variety of applications. Fumes are captured using a 6 Flame Retardant Flexible Hose. The Pro Spot Fume Extractors are extremely portable, quiet, efficient and are available in either 110 or 220VAC. Part # FE-110 FE-220 Stand Along Unit $3,525 $89 mo* Key Features: Low Maintenance Quick Change Filters Extremely Portable Variable Speed Fan Control Steel Construction Promotes Safer Work Environment Easy to replace air filters Optional: Built -In Fume Extractor in Weld Station Kit 2 Rivet Gun $175 mo* $7,950 The PR-5 self-piercing rivets join two or more pieces of material with the use of extreme pressure and precision machined punch and die sets. The punches are magnetic to hold the rivets in place, making operation quick and easy. The dies complete the process and prevent the rivet from punching through the last layer of material. It allows you to join different materials such as:, Steel, Plastic, and more. Features: Easy to use Electric and hydraulic Portable, battery operated Creates and drills out rivets Only one adjustment (2-5 ton) Designed for aluminum vehicles Uses:» Hole punching» Flattening of panels» Self-piercing rivets» Blind rivets 8
6. Vac Systems Tiger-Vac SS-IT EX (TC) RE (CFE) HEPA How the Unit Works: Stainless steel SAE 304 Interceptor Tank and Drain Valve and powder coated Tilting Cart. Less than 10 Ohms of resistivity. This unit is equipped with a true HEPA Filter (H14) located downstream. This unit has been designed for the recovery of small quantities of metallic, conductive and explosive dusts into an immersion liquid bath such as water, paraffin oil, mineral oil, etc. This unit renders any hazardous dust inert. This unit can be converted for the recovery of fuel, solvents and acids. The heavy duty powder coated Tilting Cart allows for the unit to be tilted backwards so that contents can be emptied into a recovery container for disposal. Features: Legally certified explosion proof/dust ignition proof by a $8,857 recognized testing laboratory Less than 10 Ohms of resistivity Tiger-Vac s immersions separators exceed all recommended parameters for wet mix dust extraction systems. Coalescing Filter Element (CFE) for moisture removal HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822. Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bath Optional Conversion Kit for Wet & Dry Recovery available Pneumatically (air) operated Stainless steel SAE 304 Interceptor tank Recovery capacity of 15 lbs (7 Kg) of dust into 5.3 gallons (20 liters) of liquid Equipped with a Liquid Level Indicator Tube Equipped with a heavy duty powder coated Tilting Cart and stainless steel Drain Valve for easy emptying of recovered materials Tiger-Vac recommends the use of Mineral Oil with a viscosity = 10.5 cst EuroVac II Wet-Mix Dust Collector How the Unit Works: Explosive dust is drawn into the unit through and forced down through a venturi, deep into the water. The water acts as a separator, and the majority of the dust particles fall to the bottom of the unit immediately. Those particles that manage to escape this first stage of cleansing, are forced through thick curtains of water, and are deflected by a series or baffles into the water turbulence, separating the remaining dust from the air. The moist clean air is drawn through the unit by an internally fitted blower, passes through a stainless steel mist eliminator, where the moisture is removed from the clean air. The dust which has settled to the bottom of the unit is removed through the sludge drain valve. Features: Powerful 13.8 amp motor with sealed bearings built to handle moist air from wet collector. 1560 watt pump produces 145 of water column; 140 free flow CFM. Has enough power for 2 technicians to sand with orbital sanders at the same time. Quiet operation particularly for fine dust... motor housing is insulated and baffled for sound. On/off feature...motor is turned on and off automatically by air switches when pneumatic tools are activated. This increases the life of the motor and reduces energy costs of running the motor. Includes a plastic sight glass to determine when water should be added. Stainless steel mist eliminator and final filter picks up 99.9% of dust to 10 microns. 2 ball valve & hose at the bottom of the separator for removing sludge. $8,857 $185 mo* 9
7. Curtains Benefits of Goff s Curtain Walls: A safer work environment Increased productivity & improved working conditions Confinement of contaminants Protection from sparks and hazardous debris Improved facility appearance Fast Delivery 7. Curtains Features Include: 14 oz. vinyl coated polyester fabric with 20 mil. clear PVC window section Curtains meet NFPA 701 & California State Fire Marshal Standards Double Lock Stitching with mildew/rot resistant thread Finished Edges with 2 Industrial Strength Velcro for attaching to adjacent curtains Fully enclosed, sewn in, galvanized chain in the bottom hem for motion reduction Resistant to most chemicals Easy to install, clean and replace Eliminates costly brick and mortar permanent type walls Materials, Construction & Sizes Goff s Curtain Walls are Custom Made for each Application. Curtains can be made in any length up to 100' high and in any layout. See right for pricing Balance #2 Brass Tooth Grommets on 1' Centers 14 oz. Reinforced Colored Vinyl Top Section (your choice of 12 different colors) All Seams Double Lock Stitched 52 Hook & Loop Fasteners Allow Adjacent Panels To Be Easily Attached To One Another 20 mil. Double Polished Clear Window Section 28 All Sections Joined Together Using Mildew/Rot Resistant Thread 14 oz. Reinforced Colored Vinyl Section (your choice of 12 Different Colors) Chain Weighted Lower Hem 14oz Vinyl Color Options Blue White Forest Green Yellow Red Gray Purple Maroon Beige Black Orange Field Green 10 * Disclaimers: No Returns due to wrong measurements - * Freight Charges Applicable on all items - * Down Payment Required *
Order Form www.englishcollisionequipment.com 1-888-994-0303 Cut here Cut here QTY Mfg Part # Description Price Extension 1. Weld Stations PS MWSAL Weld Station $ 8,365.00 $ AL 5 Stud Welder *Payments as low as $174 per month PS MWSALK1 Weld Station Kit 1 $ 12,775.00 $ AL 5 Stud Welder *Payments as low as $268 per month SP 1 MIG 220V Utility Panel Gas Bottle Bracket PS MWSALK2 Weld Station Kit 2 $ 16,305.00 $ AL 5 Stud Welder *Payments as low as $341 per month 2. Hand Tool Kit SP 1 MIG 220V Utility Panel Gas Bottle Bracket Built In Fume Extractor PS AL Hand Tool Kit Hand Tool kit $ 3,795.00 $ *Payments as low as $95 per month 3. Pulse Mig Welders 4. Fume Extractors 5. Rivet Gun Shop Name: PS SP 1 Mig $ 4,155.00 $ (Included in Weld Station Kit 1 & 2) *Payments as low as $105 per month PS SP 2 Alum & Silicon Bronze Mig $ 6,260.00 $ *Payments as low as $132 per month PS SP 5 Alum/Steel/Sil Bronze $ 8,895.00 $ & Tig and Stick Welder *Payments as low as $186 per month PS FE 110 110 Volt Fume Extractor $ 3,525.00 $ PS FE 220 220 Volt Fume Extractor $ 3,525.00 $ (Built In is included in Weld Station Kit 2) *Payments as low as $89 per month PS PR 5 Rivet Gun $ 7,950.00 $ *Payments as low as $166 per month 6. Vac Systems BT 110411 Tiger Vac Air Powered $ 8,857.00 $ EU 50 183 Euro Vac Electric Powered $ 8,857.00 $ *Payments as low as $185 per month 7. Curtains * Shop must sketch drawing for curtains GC 12Wx8H 2 sided Goff Curtains 8' High $ 1,038.00 $ GC 12Wx8H 3 sided Goff Curtains 8' High $ 1,762.00 $ GC 12Wx8H 4 sided Goff Curtains 8' High $ 2,267.00 $ *To be determined with package only GC 12Wx9H 2 sided Goff Curtains 9' High $ 1,094.00 $ GC 12Wx9H 3 sided Goff Curtains 9' High $ 1,856.00 $ GC 12Wx9H 4 sided Goff Curtains 9' High $ 2,380.00 $ *To be determined with package only GC 12Wx10H 2 sided Goff Curtains 10' High $ 1,156.00 $ GC 12Wx10H 3 sided Goff Curtains 10' High $ 1,957.00 $ GC 12Wx10H 4 sided Goff Curtains 10' High $ 2,501.00 $ *To be determined with package only GC 12Wx12H 2 sided Goff Curtains 12' High $ 1,260.00 $ GC 12Wx12H 3 sided Goff Curtains 12' High $ 2,131.00 $ GC 12Wx12H 4 sided Goff Curtains 12' High $ 2,710.00 $ Total Fax BOTH sides to: 972 761 9008 S 11
www.englishcollisionequipment.com 1-888-994-0303 Shop Name Address Cut here χ City State Zip Phone Fax Authorized Buyers Signature English Representative English Location/Store# Fill both sides out and fax both sides to 972-761-9008. Orders will NOT be processed without all information filled out. Signature approves order. English Fax: 972-761-9008 *************************************************************************************** *For easy low monthly payments contact Simplified Leasing Check here if you will be financing: Customer responsibility to contact finance company. The Leader Among Commercial Financing Companies Our financing programs are designed to "custom fit" your needs, business situation, leasing preferences, and credit line. Unlike most other commercial financing companies, we are not some big clearing house that has the "one size fits all" mentality. Simplified Leasing is a dedicated commercial financing company that will work hard to ensure you are "fitted" with the best financing for your business needs. Phillip L. Stuart Office: 866-810-1305 * Fax:866-899-1626 www.simplifiedleasing.com * Terms * Payments and Terms are based on Approval of Credit and Time in Business. This ad does not imply that all applicants will be approved. Terms are subject to change without prior notice. Financing Terms are provided through our Exclusive Funding Partner Simplified Leasing and availability does not constitute a commitment by English Color or its partners, assignees or affiliates. Internal office use only Order Date: Name: Purchase Order: Cut here