SERIES Micro-size Inductive Proximity -wire available PNP output Oil resistant Flexible cable Different freq. available available available Amplifier Built-in High performance in micro-size design GA-/GH GX GX-N GX-U/FU G-H/H G-N G-/U Wide model variety Models ranging from extremely compact to long range are available to suit various applications. Flexible cable The bending durability of its cable is ten times that of the conventional model. The sensor can be mounted on a moving table or a robot arm. Versatile mounting Since the sensor is fingertip size, it can be mounted in a tight space. Conforming to EMC Directive U Recognition (Only -F and -F) Reduced wiring operation The wiring cost of the DC -wire is / that of a conventional model. Besides, the possibility of miswiring is reduced. Particularly convenient when many sensors are used. Wiring of the -wire is cumbersome. Wiring of the -wire is simple and neat. m Except PNP output and m 6. ft cable attached NPN output 6
APPICATIONS Detecting wafer frame Wafer Wafer frame Detecting aluminum pallet Code reading INDUCTIVE ORDER GUIDE - DC -wire NPN output Type Appearance (mm in) Sensing range (Note ) Model No. (Note ) 7..9 7..9 7.. 7.. 7.. 7...7.7.7.7.77.96.77.96 7.6 7.6 7.6 7.6 Maximum operation distance. mm.9 in ( to. mm) ( to.7 in) Stable range -FU -FUI -FUB -FUIB -HU -HUI -HUB -HUIB -F -FI -FB -FIB -H -HI -HB -HIB Output Non-contact DC - wire NPN open-collector transistor Output operation Notes: ) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard object. The stable range stands for the range for which the sensor can stably detect the standard object even if there is an ambient temperature drift and/or supply voltage fluctuation. ) I in the model No. indicates a different frequency. -N NPN output PNP output Type Appearance (mm in) Sensing range (Note ) Model No. (Note ) Terminal Cable Terminal Cable Maximum operation distance mm. in ( to mm) ( to in) Stable range -NF (Note ) -NFI (Note ) -NFB -NFIB -NFT (Note ) -NFTI (Note ) -NFTB -NFTIB -NF-P -NFI-P -NFB-P -NFIB-P -NFT-P -NFTI-P -NFTB-P -NFTIB-P Output NPN open-collector transistor PNP open-collector transistor Output operation Notes: ) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard object. The stable range stands for the range for which the sensor can stably detect the standard object even if there is an ambient temperature drift and/or supply voltage fluctuation. ) I in the model No. indicates a different frequency. ) These models, with normally open NPN output, are also available as V supply voltage. Please contact our office for details. G-/U GA-/GH GX GX-N GX-U/FU G-H/H G-N 6
ORDER GUIDE - (Standard) Type Appearance (mm in) Sensing range (Note ) Model No. (Note ) Output Output operation GA-/GH GX GX-N GX-U/FU G-H/H G-N G-/U DC -wire NPN output PNP output.9.9 Type Appearance (mm in) Sensing range (Note ) Model No. (Note ) Output.9.9.9.9.9.9.9.9.9.9.6..6..6.6.. Maximum operation distance mm in ( to mm) ( to.7 in) Stable range Maximum operation distance mm in ( to 6. mm) ( to. in) Stable range -FU -FUI -FUB -FUIB -HU -HUI -HUB -HUIB -F -FI -FB -FIB -H -HI -HB -HIB -F-P -FI-P -FB-P -FIB-P -FU -FUI -FUB -FUIB -HU -HUI -HUB -HUIB -H -HI -HB -HIB Non-contact DC - wire NPN open-collector transistor PNP open-collector transistor Non-contact DC - wire NPN open-collector transistor Notes: ) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard object. The stable range stands for the range for which the sensor can stably detect the standard object even if there is an ambient temperature drift and/or supply voltage fluctuation. ) I in the model No. indicates a different frequency. - (ong range) For mounting on non-magnetic material (Note ) DC -wire NPN output Output operation Notes: ) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard object. The stable range stands for the range for which the sensor can stably detect the standard object even if there is an ambient temperature drift and/or supply voltage fluctuation. ) I in the model No. indicates a different frequency. ) To mount the long range - on a magnetic body, such as iron, the enclosed aluminum sheet, or any other aluminum sheet having a minimum size of 9.t. mm..t. in (-HU / Aluminum sheet -H: t. mm..t. in), should be inserted between the sensor and the magnetic body. However, it is not necessary to use the aluminum sheet when mounting on a non-magnetic body, such as, aluminum or an insulator. 66
ORDER GUIDE Flexible cable and m 6. ft cable length Flexible cable and m 6. ft cable length (standard: m. ft) are also available. INDUCTIVE Table of Model Nos. Flexible cable & Type Standard Flexible cable m 6. ft cable length m 6. ft cable length DC -wire NPN output PNP output Front Top Front Top Front Top Front Top Top Top Front Front -FU -FUI -FUB -FUIB -HU -HUI -HUB -HUIB -FU -FUI -FUB -FUIB -HU -HUI -HUB -HUIB -FU -FUI -FUB -FUIB -HU -HUI -HUB -HUIB -F -FI -FB -FIB -H -HI -HB -HIB -NF -NFI -NFB -NFIB -NFT -NFTI -NFTB -NFTIB -F -FI -FB -FIB -H -HI -HB -HIB -H -HI -HB -HIB -NF-P -NFI-P -NFB-P -NFIB-P -NFT-P -NFTI-P -NFTB-P -NFTIB-P -F-P -FI-P -FB-P -FIB-P -FU-R -FUI-R -FUB-R -FUIB-R -HU-R -HUI-R -HUB-R -HUIB-R -FU-R -FUI-R -FUB-R -FUIB-R -HU-R -HUI-R -HUB-R -HUIB-R -FU-R -FUI-R -FUB-R -FUIB-R -HU-R -HUI-R -HUB-R -HUIB-R -F-R -FI-R -FB-R -FIB-R -H-R -HI-R -HB-R -HIB-R -NF-R -NFI-R -NFB-R -NFIB-R -F-R -FI-R -FB-R -FIB-R -FU-C -FUI-C -FUB-C -FUIB-C -HU-C -HUI-C -HUB-C -HUIB-C -FU-C -FUI-C -FUB-C -FUIB-C -HU-C -HUI-C -HUB-C -HUIB-C -FU-C -FUI-C -FUB-C -FUIB-C -HU-C -HUI-C -HUB-C -HUIB-C -F-C -FI-C -FB-C -FIB-C -H-C -HI-C -HB-C -HIB-C -NF-C -NFI-C -NFB-C -NFIB-C -F-C -FI-C -FB-C -FIB-C -H-C -HB-C -H-C -NF-P-C -NFI-P-C -NFB-P-C -NFIB-P-C -F-P-C -FI-P-C -FB-P-C -FIB-P-C -FU-R-C -FUI-R-C -FUB-R-C -FUIB-R-C -HU-R-C -HUI-R-C -HUB-R-C -HUIB-R-C -FU-R-C -FUI-R-C -FUB-R-C -FUIB-R-C -HU-R-C -HUI-R-C -HUB-R-C -HUIB-R-C -FU-R-C -FUI-R-C -FUB-R-C -FUIB-R-C -HU-R-C -HUI-R-C -HUB-R-C -HUIB-R-C -F-R-C -FI-R-C -FIB-R-C -NF-R-C -NFI-R-C -NFB-R-C -NFIB-R-C -F-R-C -FI-R-C -FB-R-C G-/U GA-/GH GX GX-N GX-U/FU G-H/H G-N 67
ORDER GUIDE Accessories MS- mounting bracket for -F, -H MS-- mounting bracket for -FU, -HU MS-- mounting bracket for -N ( ) ( ) ( ) MS-AF Aluminum sheet for ( -FU ) MS-AH Aluminum sheet for -HU, -H ( ) G-/U pc. each of screw, nut, spring washer and plain washer is attached. pc. each of screw, nut, spring washer and plain washer is attached. Not included with the MS--. (Bracket only) Please use only the items included with the sensor. GA-/GH GX GX-N GX-U/FU G-H/H G-N OPTIONS Designation Connector mounting bracket Model No. CN- CN--C CN--C MS-- MS-- MS- MS-- Description Connector for the terminal ength: m. ft Mating cable for the terminal ength: m 9. ft Mounting bracket for NPN output of - Mounting bracket for -N Mounting bracket for - Mounting bracket for -F Connector CN- mounting bracket MS-- MS-- MS- MS-- Mounting position can be adjusted. It is rustfree, being stainless steel. A set of one M.6 (length: mm in) pan head screw and two M (length: mm in) screws with washers are attached. Screws are not supplied. MS- CN--C CN--C Screws are not supplied. MS-- 6
SPECIFICATIONS DC -wire Item Environmental resistance Type Standard Model No. Max. operation distance (Note ) Stable range (Note ) Standard object Hysteresis Repeatability Supply voltage Current consumption (Note ) Output Utilization category Short-circuit protection Max. response frequency Operation indicator -color indicator Pollution degree Protection Ambient temperature Ambient humidity EMC Voltage withstandability Insulation resistance Vibration resistance Shock resistance Sensing range variation Material Cable (Note 6) Cable extension Weight Accessories Temperature characteristics Voltage characteristics -FU - -HU. mm.9 in % to. mm to.7 in Iron sheet t mm.9.9t.9 in Non-contact DC -wire current: to 7 ma (Note ) Residual voltage: V or less (Note ) % or less of operation distance Along axis, perpendicular to axis:. mm. in or less to V DC % Ripple P-P % or less. ma or less DC- or DC- Incorporated khz : Red ED (lights up when the output is ON) : ights up in green under stable condition ights up in red under unstable condition (Industrial environment) IP67 (IEC), IP67 g (JEM) to7 C to F, Storage: to C to76 F to % RH, Storage: to 9 % RH EN -, EN -, EN 697--, V AC for one min. between all supply terminals connected together and enclosure MΩ, or more, with V DC megger between all supply terminals connected together and enclosure to Hz frequency,. mm.9 in amplitude in X, Y and Z directions for two hours each, m/s acceleration ( G ) in X, Y and Z directions for three times each Over ambient temperature range to7 C to F: Within % of range at C6 F Enclosure: PBT, Indicator part: Polyalylate. mm -core oil, heat and cold resistant cable, m. ft long Within % for % fluctuation of the supply voltage Extension up to total m 6. ft is possible with. mm, or more, cable. g g MS-- ( mounting bracket): set - Standard ong range (For mounting on non-magnetic body) (Note ) -FU -HU -FU -HU mm in % to mm to.7 in Iron sheet t mm.77.77t.9 in mm in % to 6. mm to. in Iron sheet t mm..t.9 in Non-contact DC -wire current: to ma (Note ) Residual voltage: V or less (Note ) Enclosure: Enclosure: Glass fiber Enclosure: PBT Glass fiber PET( reinforced ) PET Indicator part: ( reinforced ) Indicator part: Polyalylate Polyalylate Indicator part: Polyalylate. mm -core oil, heat and cold resistant cable, m. ft long MS-AF (Aluminum sheet): pc. MS-AH (Aluminum sheet): pc. Notes: ) To mount the long range - on a magnetic body, such as iron, the enclosed aluminum sheet, or any other aluminum sheet having a minimum size of 9.t. mm..t. in (-HU : t. mm..t. in), should be inserted between the sensor and the magnetic body. However, it is not necessary to use the aluminum sheet when mounting on a non-magnetic body, such as, aluminum or an insulator. ) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard object. The stable range stands for the range for which the sensor can stably detect the standard object even if there is an ambient temperature drift and/or supply voltage fluctuation. ) It is the leakage current when the output is in the OFF state. ) The maximum load current varies with the ambient temperature. Refer to I/O CIRCUIT AND WIRING DIAGRAMS (p.69l) for more details. ) When the cable is extended, the residual voltage becomes larger according to the resistance of the cable. The residual voltage of m 6. ft cable length increases by. V. 6) The flexible cable (model No. with suffix -R ) has a. mm (- :. mm ) flexible, oil, heat and cold resistant cabtyre cable, m. ft long. INDUCTIVE G-/U GA-/GH GX GX-N GX-U/FU G-H/H G-N 69
G-/U GA-/GH GX GX-N GX-U/FU G-H/H G-N SPECIFICATIONS NPN and PNP output NPN output PNP output -N - -N - ong range Type - For mounting Cable Terminal Standard Cable on non-magnetic body ( ) Terminal Standard (Note ) Standard Item Model No. -F -H -NF -NFT -F -H -H -NF-P -NFT-P -F-P Max. operation distance (Note ). mm.9 in % mm. in % mm in % mm in % mm. in % mm in % Stable range (Note ) to. mm to.7 in to mm to in to mm to.7 in to 6. mm to. in to mm to in to mm to.7 in Standard object Hysteresis Repeatability Supply voltage Current consumption Output Utilization category Short-circuit protection Max. response frequency Operation indicator Pollution degree Protection Ambient temperature Ambient humidity EMC Voltage withstandability Insulation resistance Vibration resistance Shock resistance Environmental resistance Sensing range variation Material Cable (Note ) Cable extension Weight Accessories Temperature characteristics Voltage characteristics Iron sheet t mm.9.9t.9 in % or less of operation distance Along axis, perpendicular to Along axis, perpendicular to Along axis, perpendicular to axis:. mm. in or less axis:.6 mm. in or less axis:. mm. in or less to V DC % Ripple P-P % or less ma or less NPN open-collector transistor Maximum sink current: ma Applied voltage: V DC or less (between output and V) Residual voltage: V or less (at ma sink current). V or less (at 6 ma sink current) DC- or DC- Hz Hz Hz Hz Red ED (lights up when the output is ON) (Industrial environment) IP67 (IEC), IP67 g (JEM) except for the terminal to C to F, Storage: to C to76 F to % RH, Storage: to 9 % RH EN -, EN -, EN 697--, V AC for one min. between all supply terminals connected together and enclosure MΩ, or more, with V DC megger between all supply terminals connected together and enclosure to Hz frequency,. mm.9 in amplitude in X, Y and Z directions for two hours each, m/s acceleration ( G ) in X, Y and Z directions for three times each Over ambient temperature range to C to F: Within % of range at C6 F Within % for % fluctuation of the supply voltage Enclosure: PBT, Indicator part: Polyalylate. mm -core oil, heat and cold resistant cabtyre cable, m. ft long g MS- ( mounting bracket): set. mm - core oil, heat and cold resistant cabtyre cable, m. ft long Iron sheet t mm.77.77t.9 in Extension up to total m. ft is possible with. mm, or more, cable. MS-- ( mounting bracket): pc. M pan head screw, plain washer, spring washer and nut: set MS-R (Rubber washer): pc. Iron sheet t mm..t.9 in Enclosure: PET (Glass fiber reinforced) Indicator part: Polyalylate. mm -core oil, heat and cold resistant cabtyre cable, m. ft long Enclosure: PBT Indicator part: Polyalylate g g g g g MS-AH (Aluminum sheet): pc. Iron sheet t mm.77.77t.9 in PNP open-collector transistor Maximum source current: ma Applied voltage: V DC or less (between output and V) Residual voltage: V or less (at ma source current). V or less (at 6 ma source current) MS-- ( mounting bracket): pc. M pan head screw, plain washer, spring washer and nut: set MS-R (Rubber washer): pc.. mm - core oil, heat and cold resistant cabtyre cable, m. ft long Notes: ) To mount the long range - on a magnetic body, such as iron, the enclosed aluminum sheet or any other aluminum sheet having a minimum size of t. mm..t. in, should be inserted between the sensor and the magnetic body. However, it is not necessary to use the aluminum sheet when mounting on a non-magnetic body, such as, aluminum or an insulator. ) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard object. The stable range stands for the range for which the sensor can stably detect the standard object even if there is an ambient temperature drift and/or supply voltage fluctuation. ) The flexible cable (model No. with suffix -R ) has a. mm (- :. mm ) flexible, oil, heat and cold resistant cabtyre cable, m. ft long. 69
I/O CIRCUIT AND WIRING DIAGRAMS DC -wire INDUCTIVE -FU / -HU I/O circuit diagram Wiring diagram circuit Tr ZD Color code Bleeder resistance (Brown) Output to 7 ma in ON state (Note). ma in OFF state V in ON state (Blue) V to V DC % Brown Blue Bleeder resistance to V DC % Internal circuit Users circuit Symbols... ZD: Surge absorption zener diode Tr : PNP output transistor Note: The maximum load current varies depending on the ambient temperature. Max. load current (ma) 7 Ambient temperature ( C F) 7 -FU / -HU / -FU / -HU I/O circuit diagram circuit Tr ZD Internal circuit Color code Bleeder resistance (Brown) Output to ma in ON state (Note). ma in OFF state V in ON state (Blue) V Users circuit Symbols... ZD: Surge absorption zener diode Tr : PNP output transistor Note: The maximum load current varies depending on the ambient temperature. Max. load current (ma) Ambient temperature ( C F) to V DC % 7 Conditions for the load ) The load should not be actuated by the leakage current (. ma) in the OFF state. ) The load should be actuated by (supply voltage V) in the ON state. ) The current in the ON state should be between to 7 ma DC. In case the current is less than ma, connect a bleeder resistance [ in parallel to the load so that a current of ma, or more, flows. ] Wiring diagram Brown Blue Bleeder resistance to V DC % Conditions for the load ) The load should not be actuated by the leakage current (. ma) in the OFF state. ) The load should be actuated by (supply voltage V) in the ON state. ) The current in the ON state should be between to ma DC. In case the current is less than ma, connect a bleeder resistance [ in parallel to the load so that a current of ma, or more, flows. ] GA-/GH GX GX-N GX-U/FU G-H/H G-N G-/U 69
I/O CIRCUIT AND WIRING DIAGRAMS NPN output I/O circuit diagram Wiring diagram Color code / Terminal symbol Brown circuit D ZD Tr (Brown /V)V (Black / OUT) Output (Note) ma max. (Blue / V) V to V DC % Black Blue to V DC % Internal circuit Users circuit Note: The output does not incorporate a short-circuit protection circuit. Do not connect it directly to a power supply or a capacitive load. G-/U Symbols... D : Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr : NPN output transistor GA-/GH GX GX-N GX-U/FU G-H/H G-N PNP output I/O circuit diagram circuit Tr D ZD Internal circuit Color code / Terminal symbol (Brown /V)V ma max. (Black / OUT) Output (Note) (Blue / V) V Users circuit to V DC % Note: The output does not incorporate a short-circuit protection circuit. Do not connect it directly to a power supply or a capacitive load. Symbols... D : Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr : PNP output transistor Wiring diagram Brown Black Blue to V DC % 69
SENSING CHARACTERISTICS (TYPICA) - INDUCTIVE Setting distance (mm in) Sensing field.7 Setting distance (mm in) Sensing field Setting distance (mm in) Setting distance (mm in) Sensing field (common).7..9.9.9 eft Center Right Operating point? (mm in)..9.9.9 eft Center Right Operating point? (mm in) 6.6.7 Standard object Iron sheet t mm.9.9t.9 in # -N - (Standard) Standard object Iron sheet t mm.77.77t.9 in # Standard object Iron sheet t mm.77.77t.9 in Standard object Iron sheet t mm.77.77t.9 in #.9.9 eft Center Right Operating point? (mm in) - (ong range) Sensing field.9 Standard object Iron sheet t mm..t.9 in # Standard object Iron sheet t mm.9.9t.9 in # # Standard object Iron sheet t mm..t.9 in #.9.9 eft Center Right Operating point? (mm in) Correlation between object size Correlation between object size and range (DC -wire ) and range (NPN output ) Sensing object Sensing object Sensing object Sensing object.7 aa mm aa in aa mm aa in.7 aa mm aa in aa mm aa in t mm t mm t mm t mm t.9 in t.9 in t.9 in t.9 in. Iron. Iron Stainless steel Stainless steel (SUS) (SUS) Sensing range (mm in) Correlation between object size and range.7 Sensing object aa mm aa in Sensing range (mm in) Correlation between object size and range Sensing range (mm in) Sensing range (mm in).9..9.9.77. Sensing object side length a (mm in) 6.6.7 Sensing object aa mm aa in.9.9 Sensing object side length a (mm in) t mm t.9 in t mm t.9 in Stainless steel (SUS).9.77. Sensing object side length a (mm in) Brass Aluminum Iron Brass Aluminum.77.7 Iron Stainless steel (SUS) Brass t mm Aluminum t.9 in Sensing object aa mm aa in.7.9.9.9 Sensing object side length a (mm in) Correlation between object size and range.9 Sensing object aa mm aa in t mm t.9 in Iron Stainless steel (SUS).9.77. Sensing object side length a (mm in) Brass t mm Aluminum t.9 in Sensing object aa mm aa in.7 Sensing range (mm in) Brass Aluminum.77 As the object size becomes smaller than the standard size (iron sheet t mm.77.77t.9 in), the range shortens as shown in the left figure. As the object size becomes smaller than the standard size (iron sheet t mm.77.77t.9 in), the range shortens as shown in the left figure. As the object size becomes smaller than the standard size (iron sheet t mm..t.9 in), the range shortens as shown in the left figure. As the object size becomes smaller than the standard size (iron sheet t mm.9.9t.9 in), the range shortens as shown in the left figures. G-/U GA-/GH GX GX-N GX-U/FU G-H/H G-N 69
G-/U GA-/GH GX GX-N GX-U/FU G-H/H G-N PRECAUTIONS FOR PROPER USE All models Mounting - (DC -wire) The tightening torque should be. Nm or less. To mount the sensor with a nut, the thru-hole diameter should be ". mm ". in. With the attached mounting screw and nut, take care that the thickness of the mounting plate should be. mm.9 in or less. If a screw other than the attached screw is used, make sure to use a M truss head screw. Do not use a flat head screw ( or a pan head screw. ) - (NPN output) The tightening torque should be. Nm or less. To mount the sensor with a nut, the thru-hole diameter should be " mm ". in. With the attached mounting screw and nut, take care that the thickness of the mounting plate should be. mm.9 in or less. If a screw other than the attached screw is used, make sure to use a M.6 truss head screw. Note: Do not use a M screw. 69 This product is not a safety sensor. Its use is not intended or designed to protect life and prevent body injury or property damage from dangerous parts of machinery. It is a normal object detection sensor. -N <One point fixing> M (length mm.7 in) pan head screw (Accessory) Rubber washer (Accessory) M. mm. in tapped hole (Depth: mm.9 in or more) or ". mm ". in thru-hole If mounting using nut and washers (Accessories) M (length mm.7 in) truss head screw (Accessory) MS-- (Accessory) M. mm. in tapped hole (Depth: mm in or more) or ". mm ". in thru-hole. mm. in If mounting using nut and washers (Accessories) ". mm ".9 in hole (Depth: mm. in or more) M.6 (length mm.7 in) truss head screw (Accessory) MS- (Accessory) M.6. mm. in tapped hole (Depth: mm in or more) or " mm ". in thru-hole. mm. in If mounting using nut and washers (Accessories) ". mm " in hole (Depth: mm. in or more) <Two point fixing> M (length mm.7 in) pan head screw (Accessory) ". mm ".9 in hole (Depth: mm. in or more) 6.6 MS-- (Accessory) M. mm. in tapped hole (Depth: mm.9 in or more) or ". mm ". in thru-hole If mounting using nut and washers (Accessories) The tightening torque should be.9 Nm or less. To mount the sensor with a nut, the thru-hole diameter should be ". mm ". in. - The tightening torque should be Nm or less. To mount the sensor with the optional sensor mounting bracket MS-, the thru-hole diameter should be ". mm ". in. Screw, nut or washers are not supplied. Please arrange them separately. To mount the long range - on a magnetic body, such as iron, the enclosed aluminum sheet, or any other aluminum sheet having a minimum size of 9. t. mm.. t. in (-HU / -H: t. mm.. t. in), should be inserted between the sensor and the magnetic body. However, it is not necessary to use the aluminum sheet when mounting on a non-magnetic body, such as, aluminum or an insulator. When mounting the inductive proximity sensor with the optional sensor mounting bracket MS--, if the bracket is mounted close to the part, the bracket itself gets sensed and the operation becomes unstable. Make sure to mount such that the mounting holes of the sensor and those of the mounting bracket are Refer to p.l for general precautions. s mounting holes M pan head screw or truss head screw Do not use a ( flat head screw) 9 mm. in M. mm. in tapped hole or ". mm ". in thru-hole If mounting using nut and washers. When mounting using MS- (Optional) -F Aluminum sheet MS-- Optional sensor ( mounting bracket) mounting bracket s mounting holes in one horizontal straight line. Influence of surrounding metal When there is a metal near the sensor, keep the minimum separation distance specified below. A B Metal Metal Note: The -FU should be mounted on an insulator or a nonmagnetic body. To mount it on a magnetic body, such as iron, use the enclosed aluminum sheet. Metal E -F -NF -FU / -F -FU A 7 mm.76 in 7 mm.76 in mm in mm in (Note) B mm in mm.77 in mm.77 in mm. in C mm. in mm.9 in 7 mm.76 in mm.9 in F D Metal Note: When -HU / -H is mounted on an insulator or a non-magnetic body, or seated on the enclosed aluminum sheet, the distance F can be zero. G C Metal -H -HU / -H -HU / -H D mm.7 in 6 mm.6 in mm.7 in E mm.9 in mm.77 in mm. in F mm. in mm in mm.9 in (Note) G mm. in mm. in mm.9 in G C
PRECAUTIONS FOR PROPER USE - All models Mutual interference prevention When two or more sensors are installed in parallel or face to face, keep the minimum separation distance specified below to avoid mutual interference. -N -F -FU -HU -H -FU -HU -H Between I and non I Between two I s or two non I s Between I and non I Between two I s or two non I s Between I and non I Between two I s or two non I s Between I and non I Between two I s or two non I s Between I and non I Between two I s or two non I s Between I and non I Between two I s or two non I s H J mm (Note ) mm.7 in mm (Note ) mm.77 in mm (Note ) mm. in mm (Note ) mm.7 in mm (Note ) 7 mm.9 in mm (Note ) mm. in mm.9 in mm. in mm.9 in mm.7 in mm.9 in 6 mm.6 in mm.9 in 6 mm.6 in mm.9 in 9 mm. in mm.9 in 9 mm.7 in Notes: ) I in the model No. specifies the different frequency. ) Close mounting is possible for up to two sensors. When mounting three sensors or more, at an equal spacing, in a row, the minimum value of dimension H should be as given below. - : mm in, -N : mm.7 in - (Standard) : 7. mm.9 in (-H :. mm.9 in) - (ong range) : mm. in (-H :. mm. in) Sensing range The range is specified for the standard object. With a non-ferrous metal, the range is obtained by multiplying with the correction coefficient specified below. Further, the range also changes if the object is plated. Correction coefficient Model No. Metal Iron Stainless steel (SUS) Brass Aluminum -FU -F -HU -H..9.7.76.. -N.7...7.. H -HU -FU -FU -HU.7.. H H -F -H.6.7. J J -H.76.. Others Do not use during the initial transient time [ ms (DC -wire : ms)] after the power supply is switched on. The output does not incorporate a short-circuit protection circuit. Do not connect it directly to a power supply or a capacitive load (excluding the DC -wire ). -NFT CN- Soldering To solder the terminals of the sensor and connector CN-, observe the following conditions. Soldering temperature: 6 C F or less Soldering time : sec. or less (CN-: sec. or less) Soldering position :. mm.9 in, or more, away from the sensor body.. mm.9 in Soldering position DC -wire Blue lead wire Brown lead wire Refer to p.l for general precautions. Wiring The sensor must be connected to a power supply via a load. If the sensor is connected to a power supply without a load, the short-circuit protection makes the sensor inoperable. (The output stays in the OFF state and the indicator does not light up.) In this case, rectify by connecting the power supply via a load. Now, the sensor becomes operable. Further, take care that if the power supply is connected with reverse polarity without a load, the sensor will get damaged. DC power supply For series connection (AND circuit) or parallel connection (OR circuit) of sensors, take care of the following. Series connection (AND circuit) When all sensors are in the ON state, the load voltage VR is given by: VR VRVccn (V) Vcc: supply ( V DC voltage Vcc [ ] n: number of max.) sensors Make sure that the load can work properly at this voltage. Note: The output is generated normally even if the indicator does not light up properly. Brown lead wire Blue lead wire DC power supply Parallel connection (OR circuit) When all sensors are in the OFF state, the load leakage Icc (I) current Icc is given by: Iccn. (ma) Vcc (n: number of sensors) Make sure that the load can work properly. Note: The load current in the ON state is given by: I Vcc V resistance (ma) - : man h l h 7 ma n: number of sensors ( turned ON ) - : man h I h ma n: number of sensors ( turned ON ) The residual voltage of the sensor is V. Before connecting a relay at the load, take care of its actuation voltage. (Some V relays may not be usable.) Relay Brown lead wire Blue lead wire ( ) VR Relay actuation voltage ( ) VS V Residual voltage when the sensor is in the ON state Relay actuation voltage: VR h V h 9 V V DC power supply -color indicator ( only) When the object is in the stable range, the ED lights up in green, and when the object is in the unstable range, the ED lights up in red. While the ED lights up in green, the is performed stably without being affected by temperature drifts or voltage fluctuations. Setting distance Max. operation distance Output operation Switched OFF Switched ON -color indicator operation ights off ED lights up in green Output operation level Unstable range ED lights up in red 69 INDUCTIVE G-/U GA-/GH GX GX-N GX-U/FU G-H/H G-N
DIMENSIONS (Unit: mm in) -FU The CAD data in the dimensions can be downloaded from the SUNX website: http://www.sunx.co.jp/ -HU G-/U. () (.9)..7.77...77 7..9 -FU..7.7 7. Sensing.9 direction " ". mounting hole ". ". cable, m. ft long...7 7..9..9 -color indicator (Red, green) Only red ED for normally ( closed ).. 7..7.6. 7..9 Sensing direction 7..9.7.6. 9..6.... 6..6.7 " ". mounting hole ". ". cable, m. ft long..7 (.).7 (.77).. -color indicator (Red,green) (Only red ED for normally closed ) -HU.96.6...7..9 GA-/GH GX GX-N GX-U/FU G-H/H G-N. -F () (.9)..7.77...77 7..9 -F..7 -NF 6.6 6. 7.6.9.6..77 6...7..9 -NF.7 7. Sensing.9 direction ".6 ". mounting hole ".6 ". cable, m. ft long Operation indicator (Red) Sensing direction ". ". mounting hole...7..9..9 "6 ".6 screw seat,.. deep " ". cable, m. ft long 7..9..9 7.. Operation indicator (Red).. 7..7.6..6...9.... -H 7..9 Sensing direction 7..9.7.6. -NFT 6.6.....7..9 6 7.7.6.6 -NFT 6.6 +V OUT V. 9..6....7 6..6.6.6.. Sensing direction.7 -H ".6 ". mounting hole ".6 ". cable, m. ft long (.) (.77)..7.. Operation indicator (Red).7.96 Operation indicator (Red) ". ". mounting hole..9..9 "6 ".6 screw seat,.. deep.9 7...6...6...9.. t. t..9...9 696
DIMENSIONS (Unit: mm in) -F -H The CAD data in the dimensions can be downloaded from the SUNX website: http://www.sunx.co.jp/ INDUCTIVE 7..9.6..7.7.7..9..67 -F 9. Sensing direction..67 -". ".6 mounting holes " ". cable, m. ft long 7.76.7. -color indicator (Note) (Red, green)..... Note: DC -wire, NPN output and PNP output have an operation indicator (red) instead of the -color indicator. MS--..9 (6.) (.6)..6 (9.) (.) mounting bracket for -FU / -HU (Accessory).. (.). (.)...77 ". ". hole t. t.6 Mounting hole dimensions Center of.. Material: Cold rolled carbon steel (SPCC) (Nickel plated) pc. each of M (length mm.7 in) truss head screw, nut, spring washer and plain washer is attached. MS-- (.) (.)..9..9 (.) (.) ". ".9 hole,. or more deep M.. tapped hole, or more deep mounting bracket for -N (Accessory).. (6) (.6)... ". ".6 hole Mounting hole dimensions t. t.6 Center of 6.6 ". ".9 hole,. or more deep M.. tapped hole,.9 or more deep Material: Cold rolled carbon steel (SPCC) (Nickel plated) pc. each of M (length mm.7 in) pan head screw, plain washer, spring washer and rubber washer ("9.t. mm".7t. in) is attached...67.9..67 Sensing direction 6 6..6..6.. 6..7..9.7 -H. -". ".6 mounting holes " ". cable, m. ft long () (.7) -color indicator (Note) (Red, green) ". ". 6.7.6. 7.7. 9. 7.9..9. Note: DC -wire and NPN output have an operation indicator (red) instead of the -color indicator. MS- (6.). (.6).6 (.9) (.) mounting bracket for -F / -H (Accessory) (.) (.)..77 ".6 ". hole Mounting hole dimensions t. t.6 Center of.. Material: Cold rolled carbon steel (SPCC) (Nickel plated) pc. each of M.6 (length mm.7 in) truss head screw, nut, spring washer and plain washer is attached. Material: NBR MS-R " " hole,. or more deep M.6.. tapped hole, or more deep Rubber washer for -N (Accessory) ". "... "9. ".7 G-/U GA-/GH GX GX-N GX-U/FU G-H/H G-N 697
DIMENSIONS (Unit: mm in) MS-- The CAD data in the dimensions can be downloaded from the SUNX website: http://www.sunx.co.jp/ mounting bracket for -F / -H (Optional) MS-- mounting bracket for -N (Optional)...6.9.9..9.9...66 7..7 M.6.. tapped hole (for sensor mounting)........9.6..9..7..6.7.6 6..6 t. t. 7.6..7.. "6 ".6..7 Fixed rubber G-/U.. 9. MS-- t t.9 Material: Bracket... Stainless steel (SUS) Fixed rubber... FKM (Fluorine rubber) GA-/GH GX GX-N GX-U/FU G-H/H G-N Material: Stainless steel (SUS) One M.6 (length mm in) pan head screw and two M (length mm in) screws with washers are attached. MS- Material: Cold rolled carbon steel (SPCC) CN-.9 mounting bracket for - (Optional). 9. t t..9 7.76 -M.. tapped hole Connector for terminal (Optional).7...9 CN. V OUT +V +V OUT V.9 (6) (.6).9 t. t.......6.6 (.) (.) (.) (.) MS--..6.7 6.6.6 t. t. mounting bracket for -F (Optional)..9 6..6..7 Fixed rubber Material: Bracket... Stainless steel (SUS) Fixed rubber... FKM (Fluorine rubber) MS-AF MS-AH -". ".6 -...6. oblong holes -". "..9.7 Aluminum sheet (Accessory for -FU, -HU and -H ). 9..7.7.9.7 9.. (MS-AH:.) t.. 69