NanoOptic Precision Delivery Grid optic 3.1" (79mm) PB Platinum Bronze. Color Options: Options. UL Universal V UH Universal V.

(7m) 9.0" (48mm) OQ eries 3" (79mm) OQ LED Area/Flood Luminaire Large Product Description NEMA Photocell Receptacle location (ordered as an option) DA Mount The OQ Area/Flood luminaire blends extreme optical control, advanced thermal management and modern, clean aesthetics. Built to last, the housing is rugged cast aluminum with an integral, weathertight LED driver compartment. Versatile mounting configurations offer simple installation. Its slim, low-profile design minimizes wind load requirements and blends seamlessly into the site providing even, quality illumination. power designator is a suitable upgrade for HID applications up to 750 Watts. Applications: Parking lots, walkways, campuses, auto dealerships, office complexes, and internal roadways 3.8" (97mm) 7." (69mm) 8" (05mm) 9.0" (48mm) Performance ummary NanoOptic Precision Delivery Grid optic 3" (79mm) Made in the U..A. of U.. and imported parts NEMA Photocell Receptacle location (ordered as an option) CRI: Minimum 70 CRI (4000K & 5700K); 80 CRI (3000K) CCT: 3000K (+/- 300K), 4000K (+/- 300K), 5700K (+/- 500K) Limited Warranty : 0 years on luminaire/0 years on Colorfast DeltaGuard finish 3.8" (97mm) ee www.cree.com/lighting/products/warranty for warranty terms 4.8" (mm) AA Mount Accessories 9.8" (757mm) Field-Installed Backlight hield OQ-BLLF Front facing optics 0.6" (7m) OQ-BLLR Rotated optics 9.0" (48mm) 3" (79mm) NEMA Photocell Receptacle location (ordered as an option) Ordering Information Fully assembled luminaire is composed of two components that must be ordered separately: Example: Mount: OQ-AA-V + Luminaire: OQ-A-NM-ME--40K-UL-V 3.8" (97mm) Mount (Luminaire must be ordered separately) OQOQ-AA Adjustable Arm OQ-DA Direct Arm Color Options: V ilver BK Black BZ Bronze PB Platinum Bronze WH White 8 lbs. (3kg) Luminaire (Mount must be ordered separately) OQ A NM Product Version Mounting Optic OQ A NM No Mount ME* Type II Medium 3ME* Type III Medium 4ME* Type IV Medium 5ME Type V Medium 5H Type V hort WN Wide ign 5D 5 Flood 5D 5 Flood 40D 40 Flood 60D Flood 3W 8" (05mm) 9.0" (48mm) 7." (69mm) Weight CCT Voltage 30K 3000K 40K 4000K 57K 5700K UL Universal 0-77V UH Universal 347-480V Color Options BK Black BZ Bronze V ilver WH White 3" (79mm) Options DIM 0-0V Dimming -- Control by others -- Refer to Dimming spec sheet for details -- Can't exceed wattage of specified input power designator 3.8" F Fuse (97mm) -- When code dictates fusing, use time delay fuse ML Multi-Level -- Refer to ML spec sheet for details -- High: 00%, Low: 30% -- Intended for downlight applications at 0 tilt PML Programmable Multi-Level, 0- Mounting Height -- Refer to PML spec sheet for details -- Intended for downlight applications at 0 tilt NEMA Photocell Receptacle location PML Programmable Multi-Level, 0-3 Mounting (ordered as an option) Height -- Refer to PML spec sheet for details -- Intended for downlight applications at 0 tilt Q9 Field Adjustable Output 4.8" -- Refer to Field Adjustable Output spec(mm) sheet for details R NEMA Photocell Receptacle -- Intended for downlight applications with maximum 45 tilt -- Photocell by others RL Rotate Left -- LED and optic are rotated to the left RR Rotate Right -- LED and optic are rotated to the right * Available with Backlight hield when ordered with field-installed accessory (see table above) Rev. Date: V5 07/0/05 U: www.cree.com/lighting T (800) 36-6800 F (6) 504-545 Canada: www.cree.com/canada T (800) 473-34 F (800) 890-7507

Product pecifications CONTRUCTION & MATERIAL lim, low profile design minimizes wind load requirements Luminaire housing is rugged die cast aluminum with an integral, weathertight LED driver compartment and high performance heat sink Convenient interlocking mounting method on direct arm mount. Mounting adaptor is rugged die cast aluminum and mounts to 3-6" (76-5mm) square or round pole, secured by two 5/6-8 UNC bolts spaced on " (5mm) centers Mounting for the adjustable arm mount adaptor is rugged die cast aluminum and mounts to " (5mm) IP,.375" (6m) O.D. tenon Adjustable arm mount can be adjusted 80 in increments Designed for uplight and downlight applications Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. ilver, bronze, black, and white are available Weight: 8 lbs. (3kg) ELECTRICAL YTEM Voltage: 0-77V or 347-480V, 50/60Hz, Class drivers Factor: > 0.9 at full load Total Harmonic Distortion: < 0% at full load Integral 0kV surge suppression protection standard To address inrush current, slow blow fuse or type C/D breaker should be used 0V ource Current: 05mA REGULATORY & VOLUNTARY QUALIFICATION culus Listed uitable for wet locations Enclosure rated IP66 per IEC 6059 when ordered without R option Consult factory for CE Certified products Certified to ANI C36.3-00, 3G bridge and overpass vibration standards 0kV surge suppression protection tested in accordance with IEEE/ANI C6.4. Meets FCC Part 5 standards for conducted and radiated emissions Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ATM tandard B 7 Meets Buy American requirements within ARRA DLC qualified when ordered with 30K (5ME, 5H optics), or 40K and 57K (ME, 3ME, 4ME, 5ME, 5H, 5D, 5D, 40D, 60D optics). Please refer to www.designlights.org/qpl for most current information Dark ky Friendly, IDA approved. Please refer to www.darksky.org/ for most current information RoH compliant. Consult factory for additional details Electrical Data* ystem Watts 0-480V Total Current 0V 08V 40V 77V 347V 480V 3.94 3 0.99 0.85 0.65 0.47 * Electrical data at 5 C (77 F) Recommended OQ eries Lumen Maintenance Factors () Ambient 5 C (4 F) 0 C (50 F) 5 C (59 F) 0 C (68 F) 5 C (77 F) Optic 5K hr Projected Lumen maintenance values at 4000K and 5 C (77 F) are calculated per TM- based on LM-80 data and in-situ luminaire testing In accordance with IENA TM--, Projected Values represent interpolated value based on time durations that are within six times (6X) the IENA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) 3 In accordance with IENA TM--, Calculated Values represent time durations that exceed six times (6X) the IENA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) 50K hr Projected 75K hr Projected/ Calculated, 3 ME, 3ME, 4ME.04 0.99 0.94 0.88 0.84 5ME, 5H, 5D, 5D, 40D, 60D, WN.35 6.06 ME, 3ME, 4ME.03 0.98 0.93 0.88 0.83 5ME, 5H, 5D, 5D, 40D, 60D, WN.39.4 4.06 0.97 ME, 3ME, 4ME.0 0.97 0.9 0.87 0.83 5ME, 5H, 5D, 5D, 40D, 60D, WN.6.03 0.96 0.88 ME, 3ME, 4ME.0 0.96 0.9 0.86 0.8 5ME, 5H, 5D, 5D, 40D, 60D, WN 3.0 0.93 0.86 0.79 ME, 3ME, 4ME.00 0.95 0.90 0.85 0.8 5ME, 5H, 5D, 5D, 40D, 60D, WN.00 0.89 0.8 0.76 0.70 00K hr Calculated 3 U: www.cree.com/lighting T (800) 36-6800 F (6) 504-545 Canada: www.cree.com/canada T (800) 473-34 F (800) 890-7507

Photometry All published luminaire photometric testing performed to IENA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IE file specific to your project consult: www.cree.com/lighting/products/outdoor/area/oq-eries ME 765 338 0 0 Type II Medium Distribution 885 443. 5 8,8 B3 U0 G,696 B3 U0 G3 3,79 B3 U0 G3 RETL Test Report #: PL03403-00 OQ-A-**-ME--40K-UL Lumens:,39 OQ-A-**-ME--40K-UL Lumens:,696 FC at grade * delivered lumens at 5 C (77 F) ** For more information on the IE (Backlight-Uplight-Glare) Rating visit: www.ies.org/pdf/erratas/tm-bugratingsaddendum.pdf. Valid with no tilt 49 084 0 0 Type II Medium w/bl Distribution 709 3605. 5 5,584 B U0 G 8,597 B3 U0 G 9,867 B3 U0 G RETL Test Report #: PL0364-003 OQ-A-**-ME-J-40K-UL w/oq-b Lumens: 4,643 OQ-A-**-ME--40K-UL w/oq-b Lumens: 8,597 FC at grade * delivered lumens at 5 C (77 F) ** For more information on the IE (Backlight-Uplight-Glare) Rating visit: www.ies.org/pdf/erratas/tm-bugratingsaddendum.pdf. Valid with no tilt 3ME 5654 740 787 393 0 0 0 Type III Medium Distribution. 0 4.7 4.7 7,996 B3 U0 G3,475 B3 U0 G3,94 B3 U0 G3 RETL Test Report #: PL03439-00 OQ-A-**-3ME--40K-UL Lumens:,03 OQ-A-**-3ME--40K-UL Lumens:,475 FC at grade * delivered lumens at 5 C (77 F) ** For more information on the IE (Backlight-Uplight-Glare) Rating visit: www.ies.org/pdf/erratas/tm-bugratingsaddendum.pdf. Valid with no tilt 597 9448 699 49 0 0 0. 5 0 4.7 4.7 Type III Medium w/bl Distribution * delivered lumens at 5 C (77 F) ** For more information on the IE (Backlight-Uplight-Glare) Rating visit: www.ies.org/pdf/erratas/tm-bugratingsaddendum.pdf. Valid with no tilt 5,399 B U0 G3 8,375 B U0 G3 9,63 B U0 G3 RETL Test Report #: PL0364-00 OQ-A-**-3ME-J-40K-UL w/oq-b Lumens: 4,9 OQ-A-**-3ME--40K-UL w/oq-b Lumens: 8,375 FC at grade U: www.cree.com/lighting T (800) 36-6800 F (6) 504-545 Canada: www.cree.com/canada T (800) 473-34 F (800) 890-7507

Photometry All published luminaire photometric testing performed to IENA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IE file specific to your project consult: www.cree.com/lighting/products/outdoor/area/oq-eries 4ME 706 830 8553 477 0 0 0 45. Type IV Medium Distribution 7,8 B3 U0 G3,53 B3 U0 G3,705 B3 U0 G3 RETL Test Report #: PL0340-00 OQ-A-**-4ME--40K-UL Lumens: 0,830 OQ-A-**-4ME--40K-UL Lumens:,53 FC at grade * delivered lumens at 5 C (77 F) ** For more information on the IE (Backlight-Uplight-Glare) Rating visit: www.ies.org/pdf/erratas/tm-bugratingsaddendum.pdf. Valid with no tilt 4847 35 0 0 45 0 Type IV Medium w/bl Distribution 743 37. 5,3 B U0 G3 8,54 B U0 G3 9,394 B U0 G3 RETL Test Report #: PL0364-00 OQ-A-**-4ME-J-40K-UL w/oq-b Lumens: 3,647 OQ-A-**-4ME--40K-UL w/oq-b Lumens: 8,54 FC at grade * delivered lumens at 5 C (77 F) ** For more information on the IE (Backlight-Uplight-Glare) Rating visit: www.ies.org/pdf/erratas/tm-bugratingsaddendum.pdf. Valid with no tilt 5ME 8350 663 475 088 0 0 45 0. Type V Medium Distribution 0 4.7 4.7 7,345 B4 U0 G5 0,536 B5 U0 G5 0,84 B5 U0 G5 RETL Test Report #: PL03466-00 OQ-A-**-5ME--40K-UL Lumens: 0,709 OQ-A-**-5ME--40K-UL Lumens: 0,536 FC at grade * delivered lumens at 5 C (77 F) ** For more information on the IE (Backlight-Uplight-Glare) Rating visit: www.ies.org/pdf/erratas/tm-bugratingsaddendum.pdf. Valid with no tilt 5H 6734 505 3367 684 RETL Test Report #: PL0350-00 OQ-A-**-5H--40K-UL Lumens:,066 0 0 45 0 0 4.7. 4.7 OQ-A-**-5H--40K-UL Lumens: 0,98 FC at grade Type V hort Distribution * delivered lumens at 5 C (77 F) ** For more information on the IE (Backlight-Uplight-Glare) Rating visit: www.ies.org/pdf/erratas/tm-bugratingsaddendum.pdf. Valid with no tilt 7,7 B4 U0 G4 0,98 B5 U0 G4,94 B5 U0 G4 U: www.cree.com/lighting T (800) 36-6800 F (6) 504-545 Canada: www.cree.com/canada T (800) 473-34 F (800) 890-7507

Photometry All published luminaire photometric testing performed to IENA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IE file specific to your project consult: www.cree.com/lighting/products/outdoor/area/oq-eries 60D 4903 8677 0 Flood Distribution 45 66 5. Lumens* Lumens* Lumens* 4.7 48.8 54.9 8,094,43,74 * delivered lumens at 5 C (77 F) RETL Test Report #: PL03903-004 OQ-A-**-60D--40K-UL Lumens:,30 OQ-A-**-60D--40K-UL, Tilt Lumens:,43 FC at grade WN 459 9344 630 35 0 0 0 4.7. Wide ign Distribution 0 7,734 0,997,309 4.7 4.748.8 54.9 6 67 73. * delivered lumens at 5 C (77 F) RETL Test Report #: PL04597-00 OQ-A-**-WN--30K-UL Lumens: 9,087 OQ-A-**-WN--40K-UL, tilt Lumens: 0,997 FC at grade U: www.cree.com/lighting T (800) 36-6800 F (6) 504-545 Canada: www.cree.com/canada T (800) 473-34 F (800) 890-7507

Luminaire EPA Fixed Arm Mount OQ-DA Weight: 8 lbs. (3kg) ingle @ 80 @ 3 @ 3 @ 4 @ 0.80.6.6.06.68 Adjustable Arm Mount OQ-AA Weight: 8 lbs. (3kg) ingle @ 80 @ 3 @ 3 @ 3 @ 80 4 @ 80 4 @ Tenon Configuration (0-80 Tilt); If used with Cree tenons, please add tenon EPA with Luminaire EPA PB-A*; PT-; PW-A3** 0 Tilt PB-A*; PB-R.375; PD-A4(80); PT-(80); PW-A3** PB-A*; PD-A4(90); PT-(90) PB-3A*; PD-3A4(90); PT-3(90) PB-3A*; PT-3(0) PB-3A*; PB-3R.375 PB-4A*(80) 0.80.6.6.06.68 3.33 4.66 0 Tilt 0.8.6.6.4.3 4.40 6.08 3.4 0 Tilt.4.6.04.84 33 5.68 7.80 4.08 Tilt.64.64.44 3.4 3.97 6.88 9.40 4.88 45 Tilt.0.0 3.00 3.80 5.07 85.64 6.00 Tilt.63.63 3.43 4.3 5.73 9.84 3.36 6.86 70 Tilt.8.8 3.6 4.4 5.73 0.4 4 7.4 80 Tilt.93.93 3.73 43 5.73 0.74 46 7.46 Tenon Configuration ( Tilt); If used with Cree tenons, please add tenon EPA with Luminaire EPA PB-4A*(90); PB-4R.375; PD-4A4(90); PT-4(90) PB-A*; PT-; PW-A3** PB-A*; PB-R.375; PD-A4(80); PT-(80); PW-A3** PB-A* PB-3A* PB-3A*; PT-3(0) PB-3A*; PB-3R.375 PB-4A*(80) PB-4A*(90); PB-4R.375 Tilt.95.95 4.84 6 5.73 0.8 4.64 9 * pecify pole size: 3 (3"), 4 (4"), 5 (5"), or 6 (6") for single, double or triple luminaire orientation or 4 (4"), 5 (5"), or 6 (6") for quad luminaire orientation ** These EPA values must be multiplied by the following ratio: Fixture Mounting Height/Total Pole Height. pecify pole size: 3 (3"), 4 (4"), 5 (5"), or 6 (6") U: www.cree.com/lighting T (800) 36-6800 F (6) 504-545 Canada: www.cree.com/canada T (800) 473-34 F (800) 890-7507

Tenon EPA Part Number EPA PB-A* None PB-A* 0.8 PB-3A* PB-4A*(80). PB-4A*(90) PB-R.375 0.9 PB-3R.375.6 PB-4R.375.3 PD eries Tenons 0.09 PT eries Tenons 00 PW-A3** 0.47 PW-A3** 0.94 WM- 0.08 WM-4 0 Tenons and Brackets (must specify color) quare Internal Mount Vertical Tenons (teel) - Mounts to 3-6" (76-5mm) square aluminum or steel poles PB-A* ingle PB-4A*(90) Quad PB-A* 80 Twin PB-4A*(80) 80 Quad PB-3A* 80 Triple quare Internal Mount Horizontal Tenons (Aluminum) - Mounts to 4" (0mm) square aluminum or steel poles PD-A4(90) Twin PD-3A4(90) Triple PD-A4(80) 80 Twin PD-4A4(90) Quad Wall Mount Brackets - Mounts to wall, roof or side of wood pole WM- Horizontal for OQ-AA mount WM-4 L-hape for OQ-AA mount WM-DM Plate for OQ-DA mount Refer to the Bracket and Tenons spec sheet for more details Round External Mount Vertical Tenons (teel) - Mounts to.375" (6m) O.D. round aluminum or steel poles or tenons PB-R.375 Twin PB-4R.375 Quad PB-3R.375 Triple Round External Mount Horizontal Tenons (Aluminum) - Mounts to.375" (6m) O.D. round aluminum or steel poles or tenons - Mounts to square pole with PB-A* tenon PT- ingle (Vertical) PT-3(90) Triple PT-(90) Twin PT-4(90) Quad PT-(80) 80 Twin Mid-Pole Bracket - Mounts to square pole PW-A3** ingle PW-A3** Double WM-DM None * pecify pole size: 3 (3"), 4 (4"), 5 (5"), or 6 (6") for single, double or triple luminaire orientation or 4 (4"), 5 (5"), or 6 (6") for quad luminaire orientation ** These EPA values must be multiplied by the following ratio: Fixture Mounting Height/Total Pole Height. pecify pole size: 3 (3"), 4 (4"), 5 (5"), or 6 (6") Direct Mount Configurations Compatibility with OQ-DA Direct Mount Bracket @ @ 80 3 @ 3 @ 4 @ 3" quare N/A ü N/A N/A N/A 3" Round N/A ü N/A N/A N/A 4" quare ü ü ü N/A ü 4" Round ü ü ü ü ü 5" quare ü ü ü N/A ü 5" Round ü ü ü ü ü 6" quare ü ü ü N/A ü 6" Round ü ü ü ü ü 05 Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. Content is subject to change. Patent www.cree.com/patents. Cree, NanoOptic, and Colorfast DeltaGuard are registered trademarks, and the Cree logo, Precision Delivery Grid and OQ are trademarks of Cree, Inc. The UL logo is a registered trademark of UL LLC. NEMA is a registered trademark of the National Electrical Manufacturers Association. The DLC QPL logo is a registered trademark of Northeast Energy Efficiency Partnerships, Inc. U: www.cree.com/lighting T (800) 36-6800 F (6) 504-545 Canada: www.cree.com/canada T (800) 473-34 F (800) 890-7507