Marine Product Selection Guide Transducers, Instruments and Sensors

Marine Product Selection Guide Transducers, Instruments and s Garmin.com/marine Garmin International, Inc. East 151st Street, Olathe, KS 66062 p: 913.7.0 f: 913.7.22 Garmin Corporation. 6, Jangshu 2nd Road, Shijr, Taipei County, Taiwan 6.2.2642.9199 fax 6.2.2642.9099 12 Garmin Ltd. or its subsidiaries M00-10109-00 1112 Garmin (Europe) Ltd. Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9RB, U.K. p: 44.1794.519944 f: 44.1794.519222

How to choose the right and mounting style This easy-to-use selection guide is organized for you by the product that you currently have and by mounting style. STEP ONE: The first thing you need to do is to locate your current product with which you are trying to match a. CHOOSE THE RIGHT MOUNTING STYLE Transducers are typically mounted in one of three ways: through the hull, inside the hull, or on the. Inside the Hull An in-hull is installed inside the bilge of a boat hull and sends & receives STEP TWO: After you find your current product, you can choose from the s that are designed to work with that unit. its signal through the hull. Some people prefer this mounting style, because it is not necessary to drill through the hull. A unit cannot be damaged when a boat is trailered, NOTE: IF YOU O NOT SEE your product or, please go to Garmin.com. Your unit may have been discontinued. Garmin still supports discontinued products and you will find them listed at Garmin.com. the is not exposed to marine growth, and there is no drag. Additionally, a can be installed and serviced while the vessel is in the water. Most inhull s are mounted inside a liquid filled tank that is first epoxied in place. As long as the water flow below the is turbulent free, it will give great What is meant by Spread Spectrum with chirp technology? Instead of using a single frequency like traditional sonar, Spread Spectrum with Chirp technology sweeps each pulse through high-speed performance. However, not all hull types (cored hulls, steel hulls, etc.) are suitable for in-hull installation. In-hull s are recommended only for solid fiberglass hulls. a range of frequencies to deliver shallow-water-like target separation at extremely deep depths and at low frequencies. Garmin Spread Spectrum with Chirp technology used on the GS 26 not only gives better target separation and resolution at On the extraordinary depths, but also allows fishermen to dial into specific frequencies to target certain species of sport fish. It offers Trailered boats typically use this mounting style, since it is out of the way of the significantly better target definition, bottom contours and noise suppression at greater depths than traditional models, and a rollers. Some people prefer a -mount because it is easy to install and remove a more timely interpretation of what s below for safer navigation and better fishing. unit especially if a kick-up bracket is used. Kick-up brackets move a out of the way to prevent damage from floating debris when a boat is underway. They also protect the when the boat is trailered, or when it is kept in the water for long periods of time. To obtain the best possible performance, install all s according to the included installation instructions. If you experience difficulty during the installation, contact Garmin Product Support, or seek the advice of a professional installer. This image shows the depth and beamwidth differences between a single-element, 600 W and a multiple-element, highperformance 1 kw. Through the Hull Flush Mounts sit flush or nearly flush with the boat hull and are recommended for smaller boats with a minimum angle. They are often installed on sailing vessels for their minimal drag. External Mounts extend beyond the hull surface and usually require a fairing to aim the sound beam vertically and are for larger un-trailered vessels. When installed with a High-Performance Fairing, the face is flush with the surface of the fairing and parallel to the waterline, resulting in a truly vertical beam, putting maximum energy on the target. in clean water, forward of propellers and running gear, produces the most effective signal return. To obtain the best possible performance, install all s according to the included installation instructions. If you experience difficulty during the installation, contact Garmin Product Support, or seek the advice of a professional installer.

M A R I N E P R O U C T S E L E C T I O N G U I E Picture escription Garmin P/N / Picture escription Garmin P/N / FRESHWATER TRANSUCERS FOR USE WITH THE ECHO FISHFINER SERIES Mount Garmin esign ual Beam 010-10249- 77/0 500W 45/15 1 4 30 010-10249-00 0/0 500W 45/15 6 30 010-11615-00 010-10249-40 77/0 500W 45/15 1 30 010-11947-00 Replacement for the dual beam included with echo units 010-10249- is preferred. Garmin 6-pin 10 ft. 6-pin ft. 6-pin Transducers for use with the echomap 50s & 70s 010-10279-01 S 6 25 y-cable to add water speed to your Garmin 6-pin sounder. 010-10715-00 6 10 Extend a 6-pin 10 feet. 010-10716-00 6 Extend a 6-pin feet. / Trolling Motor Airmar P32 Airmar P72 trolling mount 010-10106- 77/0 500W 45/15,S,T 30 010-11947-00 3-010-100-77/0 500W 45/15 30 010-11947-00 New for 13! Provides depth, speed, and in one package. New for 13! Perfect for in-hull mount, trolling motors, or ice fishing. Mount Garmin esign ual Beam 010-10249-40 77/0 500W 45/15 1 30 010-10249- 77/0 500W 45/15 1 4 30 010-1194-00 New for 13! Replacement for the dual beam included with echo units 010-10249-40 is recommended. Garmin 4-pin 6-pin to 4-pin sounder 010-1021-21 77/0 500W?/14 30 010-11947-00 010-1021-22 77/0 500W?/14 30 010-11947-00 010-10217-21 77/0 500W?/14 30 010-11947-00 010-10217-22 77/0 500W?/14 30 010-11947-00 010-10279-04 S 4 30 010-11615-00 Unit: 4 XCR: 6-15 -15-15 -15 2 New for 13! Provides excellent performance at high speeds. Excellent on fiberglass and metal hulls. o not use on wood hulls. New for 13! Provides excellent performance at high speeds. Excellent on fiberglass and wood hulls. o not use on metal hulls. Add water speed to your echo series fishfinder. Use this to connect a Garmin 6-pin single/dual beam to a Garmin 4-pin echo series fishfinder. / Trolling Motor Airmar P32 Airmar P72 trolling mount 010-10106- 77/0 500W 45/15,S,T 30 3-010-100-77/0 500W 45/15 30 010-1021-21 77/0 500W 45/15 30 010-1021-22 77/0 500W 45/15 30 010-10217-21 77/0 500W 45/15 30 010-10217-22 77/0 500W 45/15 30-15 -15-15 -15 New for 13! Provides depth, speed, and in one package. New for 13! Perfect for in-hull mount, trolling motors, or ice fishing. New for 13! Provides excellent performance at high speeds. Excellent on fiberglass and metal hulls. o not use on wood hulls. New for 13! Provides excellent performance at high speeds. Excellent on fiberglass and wood hulls. o not use on metal hulls. 4-pin 010-11617-10 4 10 Extend a 4-pin 10 feet. 6-pin to -pin sounder 010-11613-00 Unit: XCR: 6 2 Connects existing 6-pin Garmin s via a wire terminal block. -pin to 4-pin sounder 010-11947-00 Unit: 4 XCR: 2 New for 13! Use this to connect a Garmin -pin single/dual beam to a Garmin 4-pin echo series fishfinder. 4-pin to -pin sounder 010-1194-00 Unit: XCR: 4 2 New for 13! Use this to connect a Garmin 4-pin single/dual beam to a Garmin -pin sounder. Suction Cup 010-10253-00 Transducer Adapter Use this suction cup to attach your mount to your boat Airmar -pin T0 Probe 010-10717- T 25 Any Versitile water/ sensor. range of 32-6F. Freshwater s for use for with use the with GPSMAP the GPSMAP 431s/531s/536s. 431s/531s/536s. Mount Trolling Motor Garmin esign ual Beam Airmar P32 Airmar P72 trolling mount 010-10249-00 0/0 500W 45/15 6 30 010-10249- 77/0 500W 45/15 4 30 010-11614-00 010-10106-00 0 250W 13,S,T 6 25 3- Replacement for the dual beam included with unit. 010-10249-00 is preferred. Provides depth, speed, and in one package. 010-100-00 0 250W 15 6 15 Perfect for trolling motors or ice fishing. Garmin -pin -pin ST50 10 ft. -pin ft. -pin 010-10279-03 S 25 y-cable to add water speed to your Garmin GS24. 010-10365- S,T Any Thru-hull water speed/ sensor. 010-11617-00 10 Extend a -pin 10 feet. 010-11617-01 Extend a -pin feet. Suction Cup 010-10253-00 Transducer Adapter Use this suction cup to attach your mount to your boat 4-pin to 6-pin sounder Airmar 6-pin T0 Probe 010-11614-00 Unit: 6 XCR: 4 2 Use this to connect a Garmin 4-pin single/dual beam to a Garmin 6-pin sounder. 010-10717-00 T 6 25 Any Versitile water/ sensor.

Picture escription Garmin P/N / Picture escription Garmin P/N / Off-shore s for use with the GS22, GPSMAP4x1s/5x1s/5x6s/7x0s (ExcludesGPSMAP 431s/531s/536s) Off-shore s for use with the Garmin GS24, GPSMAP 5x7xs, & GPSMAP 7x1xs These can also be used with the GS22, GPSMAP4x1s/5x1s/5x6s/7x0s with a -pin to 6-pin (010-11612-00) (ExcludesGPSMAP 431s/531s/536s) Garmin 6-pin ual 010-10272-00 50/0 500W 40/10 6 30 Replacement for the dual frequency included with many Garmin units. Garmin ual 010-10272-10 50/0 500W 40/10 30 Basic dual frequency. Mount Garmin ual Airmar P66 010-10272-10 50/0 500W 40/10 30 010-11612-00 010-10192-01 50/0 45/11 00-,S,T 6 25 2-010-10272-00 is preferred. Only offshore mount to provide depth, speed, and in one package. Mount Garmin 6-pin ual Airmar P66 010-10272-00 50/0 500W 40/10 6 30 010-11613-00 010-10192-21 50/0 45/11 00-,S,T 25 2-010-10272-10 is preferred. Only offshore mount to provide depth, speed, and in one package. Airmar P319 with 010-10194-01 50/0 45/12 00-6 on fiberglass and metal hulls. o not use on wood hulls. Airmar TM260 010-115- 50/0 19/6 100-2- Only mount. Airmar B117 with 010-1092-00 50/0 45/12 010-1092-01 50/0 45/12 010-1012-01 50/0 45/12 00-00- 00-6 6 6-15 Entry level, bronze. Excellent for fiberglass and wood hulls. oes not require a fairing. on fiberglass and wood hulls. o not use on metal hulls. Airmar P319 with 010-10194-21 50/0 45/12 010-1092- 50/0 45/12 010-1092-21 50/0 45/12 00-00- 00- -15 on fiberglass and metal hulls. o not use on wood hulls. Entry level, bronze. Excellent for fiberglass and wood hulls. oes not require a fairing Airmar B45 Narrow Stem Airmar B744V 010-1093-00 50/0 45/12 010-1013-02 50/0 45/12 00-00- 6,S,T 6 0-26 0-24 Smallest, most economical, bronze stem with a fairing. Requires only a 22mm hole. Excellent for fiberglass and wood hulls. Only thru-hull that offers depth, speed, and in one package. Airmar SS60 with Airmar SS60 with 010-116- 50/0 45/12 010-116-21 50/0 45/12 00-00- -15 New for 13! Entry level, stainless steel. Excellent for fiberglass and wood hulls. oes not require a fairing Airmar B744VL Long stem 010-10193-02 50/0 45/12 00-,S,T 6 0-24 Extended stem length version of B744V for steep vessels or thick, cored hulls. Airmar SS60 with 010-116-22 50/0 45/12 00-010-11010-00 50/0 22x/6x6 010-11010-01 50/0 22x/6x6-100 - 100 6 6-15 Step up to without a fairing! Flushmounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. 010-11010- 50/0 22x/6x6 010-11010-21 50/0 22x/6x6-100 - 100-15 Step up to without a fairing! Flushmounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Airmar B260 010-10640-00 50/0 19/6 100-6 0- Popular narrow beam, thru hull with great deep water performance. 010-11010-22 50/0 22x/6x6-100 New for 13! Airmar P79 adjustable in-hull 010-10327-00 50/0 45/12 Airmar M260 010-10641-00 50/0 19/6 -pin to 6-pin sounder Airmar 6-pin T0 Probe Garmin 6-pin 10' 6-pin Xdcr Extension cable 00-100- 010-11612-00 6 25 6 Unit: 6 XCR: 0-30 2 Entry level, in-hull, with adjustable able making installation a snap. t for cored hulls. imum fiberglass thickness should be no more than 5/" thick. Only in-hull. o not use with cored hulls. imum hull thickness should be no more than 1" thick. Connects new -pin offshore to legacy 6-pin Garmin sonar units. 010-10717-00 T 6 25 Any Versitile water/ sensor. range of 32-6F. 010-10279-01 S 6 25 y-cable to add water speed to your Garmin 6-pin sounder. 010-10715-00 6 10 Extend a 6-pin 10 feet. Airmar SS164 with Airmar SS164 with Airmar SS164 with Airmar B117 with Airmar B45 Narrow Stem Airmar B744V 010-1169- 50/0 22x/6x6 010-1169-21 50/0 22x/6x6 010-1169-22 50/0 22x/6x6 010-1012-21 50/0 45/12 010-1093- 50/0 45/12 010-1013-22 50/0 45/12-100 - 100-100 00-00- 00-,S,T -15 0-26 0-24 New for 13! Step up to without a fairing! Flushmounted stainless steel housing protrudes less than 1/4 outside hull and can sit on trailer rollers/ bunks without damage. on fiberglass and wood hulls. o not use on metal hulls. Smallest, most economical, bronze stem with a fairing. Requires only a 22mm hole. Excellent for fiberglass and wood hulls. Only thru-hull that offers depth, speed, and in one package. ' 6-pin Xdcr Extension cable 010-10716-00 6 Extend a 6-pin feet. Airmar B744VL Long stem Airmar SS270W widebeam 010-10193-22 50/0 45/12 010-11140- 50/0 25/25 00-1350- 00,S,T 0-24 0- Extended stem length version of B744V for steep vessels or thick, cored hulls. High performance with 4x the beamwidth at 0kHz than the B260. Perfect for fisherman who want to spot more fish in shallow to mid-water depths. Airmar B25 010-10703- 50/0 14x23/3x5-20 0-26 Mid-range performance with a narrow beam for good deep water capability and bottom definition. Airmar B260 010-10640- 50/0 19/6 100-0- Popular narrow beam, thru hull with great deep water performance. Airmar R99 010-10642- 50/0 x17/5-4000 Most powerful thru-hull for the GS24.

Picture escription Garmin P/N / Airmar P79 adjustable in-hull 010-10327- 50/0 45/12 00 25 Entry level, in-hull, with adjustable able making installation a snap. t for cored hulls. imum fiberglass thickness should be no more than 5/" thick. Airmar M260 010-10641- 50/0 19/6 100 0-30 Airmar R199 010-10643- 50/0 x17/5 4000 6-pin to -pin sounder 010-11613-00 Unit: XCR: 6 2 Airmar -pin T0 Probe 010-10717- T Garmin -pin 010-10279-03 S -pin ST50 010-10365- S,T / Only in-hull. o not use with cored hulls.imum fiberglass thickness should be no more than 1" thick. Airmar B150M with 010-11927-21 95-155 -15 Most powerful in-hull for the GS24. imum fiberglass thickness should be no more than 1.5" thick. Airmar B150M with 010-11927-22 95-155 Connects existing 6-pin Garmin to the GS24 via a wire terminal block. Airmar B75H with 010-11634- 15/9 00 25 Any Versitile water/ sensor. range of 32-6F. Airmar B75H with 010-11634-21 15/9 00 6-15 25 y-cable to add water speed to your Garmin GS24. Airmar B75H with 010-11634-22 15/9 00 Any Thru-hull water speed/ sensor. Airmar B75M with 010-11636- 0-130 24/16 00 Entry Level Chirp solution. Provides good depth capability and good target separation. New for 13! New for 13! 10 ft. -pin 010-11617-01 Airmar B75M with 010-11636-21 0-130 24/16 00 6-15 Airmar B75M with 010-11636-22 0-130 24/16 00 Airmar B75L with 010-11635- 40-75 32/21 00 Airmar B75L with 010-11635-21 40-75 32/21 00-24 Spread spectrum with Chirp technology s for use with the Garmin GS26, GPSMAP 5x7xs, & GPSMAP 7x1xs. 010-11646- 3-21 Airmar TM265LM 010-11650- 5-135 16-25/11-16 3-21 010-1192- 95-155 3- Best performing and only mount. Excellent deep-water performance and exceptional bottom and water column detail. New for 13! * Requires separate install kit for trolling motor mount application. Mount Garmin P/N 010-11927- 95-155 010-11617-00 Airmar TM150M escription Airmar B150M with 10 ft. -pin Airmar TM265LH Picture Airmar B175H with 010-11937- 6-10 Airmar B175H with 010-11937-21 6-10 -15 Airmar B175H with 010-11937-22 6-10 Airmar B175M with 010-119- 5-135 11-16 Airmar B175M with 010-119-21 5-135 11-16 -15 Airmar B175M with 010-119-22 5-135 11-16 Airmar B175L with 010-1193- 40-60 16-25 Airmar B175L with 010-1193-21 40-60 16-25 -15 Airmar B175L with 010-1193-22 40-60 16-25 New for 13! Step up to without a fairing! Flushmounted bronze housing protrudes less than 1/4 outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the accommodates all hull s and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the choice of frequencies. Excellent for fiberglass and wood hulls. Airmar B265LH 010-11645- 0- Airmar B265LM 010-11647- 5-135 16-25/11-16 0- Airmar R109LH 010-11642- 3-75 & 9x23/ 4-000 49 in a slightly smaller package than the R509LH. Very narrow-beam at both low and high frequencies for excellent deep water performance. Best deep water performance, highest power. Very narrow-beam at both low and high frequencies for excellent deep water performance. One covers popular fishing frequencies - 2, 3, 50 and 0 all in one. t the best choice for those who primarily fish in shallow water. Airmar R509LH 010-11640-30 2-60 & 2-3kW 5x9-11x23/ 4-10000 70 Essentially combines two B175s in one housing. Excellent deep-water performance and exceptional bottom and water column detail.

Picture escription Garmin P/N / Airmar M265LH 010-11644- Airmar R111LH 010-11643- 3-75 & 10x19/ 4-000 Airmar R599LH 2-60 & 010-11641-30 2-3kW 9x23/ 4-10000 Pocket Mount 0-30 Best performing and only in-hull. Excellent deep-water performance and exceptional bottom and watercolumn detail. Narrow beam provides crisp image detail. t for cored-hull vessels. 49 In-hull version of the R109LH. Very narrow-beam at both low and high frequencies for excellent deep water performance. t for cored-hull vessels. 70 In-hull version of the R509LH. Best deep water performance, highest power. Very narrow-beam at both low and high frequencies for excellent deep water performance. t best choice for fishing shallow water. t for cored-hull vessels. 010-1111- ependant Popular choice for boat builders. Pocket mount version of the B265LH. Airmar PM265LM 010-1112- 5-135 16-25/11-16 ependant Popular choice for boat builders. Pocket mount version of the B265LM. 010-11643- 3-75 & 10x19/ 4-000 49 ependant Pocket mount version of the R109LH. Very narrow-beam at both low and high frequencies. Airmar CM599LH 010-1113-30 2-60 & 2-3kW 9x23/ 4-10000 70 ependant Pocket mount version of the R599LH. Very narrow-beam at both low and high frequencies. t best choice for fishing shallow water. New for 13! Used with 010-1192- Airmar PM265LH Airmar R111LH Trolling Motor kit 010-11957-00 010-00703-00 NMEA013, 010-00704-00 NMEA013 30 Airmar P,, 010-11050-00 11 500,S 0- Provide depth,, speed. Airmar P w/o speed,, 010-11050- 11 500 0-, 0-12 010-00701-00 0-12, 13-24 010-00701-01 13-24 NMEA013, 0-12 010-00702-00 NMEA013 30 0-12 NMEA013, 13-24 010-00702-01 NMEA013 30 13-24 Airmar ST00,, 010-11051-00 10x44 330,S Provide depth,, speed. Airmar T00, 12, 010-11105-01 12 600-15 Airmar T00,, 010-11105-00 12 600, Airmar P79 adjustable in-hull 010-114-00 7 500 NMEA 00 Entry level, in-hull, with adjustable able making installation a snap. t for cored hulls. imum fiberglass thickness should be no more than 5/" thick. Mount Smart sensors for use with NMEA013 or products. NMEA 00 Transducer Adapter Kit 010-11525-00 0 epends on epends on 6.5 epends on Adapts already installed Airmar P19, B60 (or compatible) 0 khz to a NMEA 00 network.