PAINT BOOTHS ARRESTORS

PAINT BOOTHS ARRESTORS INDUSTRIAL AUTOMOTIVE

Paint Booth Arrestors AMSP-2/DUSTGUARD Intake Air Filters AMSP-2 - Description AMSP-2 Panel Filters are designed to fit any standard Cross Draft Booth. They are normally found in the booth doors. AMSP-2 Filters are constructed of two synthetic layers sealed over a metal wire frame. The first layer, dry and white, acts as a préfiltre to remove the medium and large particles. The second layer, green with an adhesive, removes and retains the smaller particles DustGuard - Description Progressive Density Panel DustGuard Panels are designed for Cross Draft and Downdraft Booths when higher quality paint is used. In addition, it can be installed in low pressure HVAC systems where a higher level of filtration is required over an AMSP-2 filter. The use of linked panels in side access systems facilitates the change out of the filters. Construction The DustGuard Filter is constructed of two synthetic media layers. The first layer of white polyester acts as a prefilter. The second stage is a dual density synthetic media with an added adhesive. The DustGuard is non-toxic and nonallergenic. The adhesive prevents the migration of the dust particles and increases its dust holding capacity.

Paint Booth Arrestors AMSP-2/DUSTGUARD Performance Standard dimensions PANELS NOMINAL PART NO. PART NO. CAPACITY QUANTITY DIMENSIONS AMSP-2 DUSTGUARD CFM PER BAG 14 X 20 X 1½ AMSP-2 1420 DG-1420 580 24 15 X 20 X 1½ AMSP-2 1520 DG-1520 625 24 16 X 20 X 1½ AMSP-2 1620 DG-1620 670 24 20 X 20 X 1½ AMSP-2 2020 DG-2020 830 24 12 X 24 X 1½ AMSP-2 1224 DG-1224 600 24 18 X 24 X 1½ AMSP-2 1824 DG-1824 900 24 20 X 24 X 1½ AMSP-2 2024 DG-2024 1000 24 24 X 24 X 1½ AMSP-2 2424 DG-2424 1200 24 16 X 25 X 1½ AMSP-2 1625 DG-1625 830 24 20 X 25 X 1½ AMSP-2 2025 DG-2025 1050 24 20 X 48 X 1½ AMSP-2 2048 DG-2048 2000 8 LINKED PANELS NOMINAL PART NO. PART NO. CAPACITY QUANTITY DIMENSIONS AMSP-2 LINKED DUSTGUARD PER UNIT PER BAG 14 X 20 X 1½ AMSP-2L 14480 DGL-14480 580 24 20 X 14 X 1½ AMSP-2L 20336 DGL-20336 580 24 15 X 20 X 1½ AMSP-2L 15480 DGL-15480 625 24 20 X 15 X 1½ AMSP-2L 20360 DGL-20360 625 24 16 X 20 X 1½ AMSP-2L 16480 DGL-16480 670 24 20 X 16 X 1½ AMSP-2L 20384 DGL-20384 670 24 20 X 20 X 1½ AMSP-2L 20480 DGL-20480 830 24 12 X 24 X 1½ AMSP-2L 12576 DGL-12576 600 24 24 X 12 X 1½ AMSP-2L 24288 DGL-24288 600 24 18 X 24 X 1½ AMSP-2L 18576 DGL-18576 900 24 24 X 18 X 1½ AMSP-2L 24432 DGL-24432 900 24 20 X 24 X 1½ AMSP-2L 20576 DGL-20576 1000 24 24 X 20 X 1½ AMSP-2L 24480 DGL-24480 1000 24 24 X 24 X 1½ AMSP-2L 24576 DGL-24576 1200 24 16 X 25 X 1½ AMSP-2L 16600 DGL-16600 830 24 25 X 16 X 1½ AMSP-2L 25384 DGL-25384 830 24 20 X 25 X 1½ AMSP-2L 20600 DGL-20600 1050 24 25 X 20 X 1½ AMSP-2L 25480 DGL-25480 1050 24 Special sizes are available upon request. RESISTANCE 0.7 APPLICATIONS for Paint Booths RESISTANCE IN. WG. 0.6 0.5 0.4 0.3 0.2 0.1 0 200 300 400 500 VELOCITY FPM DustGuard» Pour les systèmes de basse vélocité.» For low velocity systems.» As a prefilter for a high efficiency filter.» As a primary filter where medium efficiency is required.» Replaces fiberglass products. DG AM2 Hardy Filtration Inc. reserves the right to make changes without notice.

High Efficiency Media / Panels HE / AMHE For paint spray booths and prep stations Description Structure:» Progressive structure with a denser clean air side and scrim (inter laid), thermo bonded. Characteristics:» Special anti-migration treatment with ecologically sound dust binder (tackifier) <R1>.» Special rotary blade cuts, no cutting powder. Applications:» Migration proof (tackified) filter media for cross draft, downdraft paint spray booths and prep stations. Performance 1: A (VV): (%] Arrestance vs. dust feed at rated air speed 2: E (W): (%] Atm. dust spot efficiency vs. dust feed at rated air speed 3: p (W): [Pa] Pressure loss vs. dust feed at rated air speed 4: p (v. J: (Pa] Pressure loss vs. air speed rate

High Efficiency Media / Panels HE / AMHE Technical details Typical filter-values according EN 779 Weight per square units 370 g/m 2 Approx. thickness Filter class Rated air speed Initial pressure loss Final pressure loss 14 mm F5 0.25 m/s 10 Pa 450 Pa Initial dust weight arrestance 90 % Average dust weight arrestance 93 % Initial dust spot efficiency 21 % Average dust spot efficiency 48 % Dust holding capacity 400 g /m 2 Temperature resistance 100(120) C Inflammability class Weld ability Marking DIN 53438 F2/K3 th, us, hf F5 EN779 / EU5 Standard dimensions NOMINAL PART NO. QUANTITY DIMENSIONS AMHE PER BOX 20 X 20 AMHE-2020 24 24 X 24 AMHE-2424 24 20 X 25 AMHE-2025 24 20 X 48 AMHE-2048 8 Bulk media is available for Downdraft Prep Station PANELS Hardy Filtration reserves the right to make changes without notice

Premium Downdraft Media / Panels MFD580 / AMMFD580 For paint spray booths and prep stations Description Structure:» Optimal progressive structure and layers of different fiber deniers, thermo-bonded.» Clean air side calendared and scrim (interlaid) thermally bonded. Characteristics:» Fully impregnated with ecologically sound dust binder (tackifier), migration proof.» Migration test class S 0 (10 microns).» Improved handling due to non-sticky surfaces, no oily hands and equipment» Special rotary blade cuts, no cutting powder. Applications:» Ceiling filter media for paint spray booths. Perfomance 1: A(VV): (%] Arrestance vs. dust feed at rated air speed 2: E (W): (%] Atm. dust spot efficiency vs. dust feed at rated air speed 3: p (W): [Pa] Pressure loss vs. dust feed at rated air speed 4: p (v, J: (Pa] Pressure loss vs. air speed rate

Premium Downdraft Media / Panels MFD580 / AMMFD580 Technical details Typical filter-values according EN 779 Weight per square units 580 g/m 2 Approx. thickness Filter class Rated air speed Initial pressure loss Final pressure loss 25 mm F5 0.25 m/s 35 Pa 450 Pa Initial dust weight arrestance 93 % Average dust weight arrestance 97 % Initial dust spot efficiency 25 % Average dust spot efficiency 59 % Dust holding capacity 340 g/m 2 Temperature resistance 100(120) C Inflammability class DIN 53438 F1/K1 Marking F5 EN779 / EU5 Standard dimensions PANELS NOMINAL PART NO. QUANTITY DIMENSIONS AMMFD580 PER BOX 20 X 20 AMMFD580-2020 24 24 X 24 AMMFD580-2424 24 20 X 25 AMMFD580-2025 24 20 X 48 AMMFD580-2048 8 See manufacturers listing for ceiling dimensions on your spray booth, if your booth is not on the list call your local representative. Hardy Filtration Inc. reserves the right to make changes without notice.

Medium & High Efficiency Pocket Filters AIR PAK Description Medium and high efficiency pocket filters offer the best filtration for the cost. Individual pockets are assembled into a sturdy galvanized header proving rigid support for the filter. The filter element is a fully synthetic fiber, neither shedding nor affected by humidity. A wide range of sizes are available. Efficiency levels: from 40% to 95%. Construction Media The synthetic filtering element consists of layered and blended polypropylene melt blown fibers attached to a dense polypropylene backing. Header A ¾ header of 24 ga. galvanized steel provides the strength of the assembled filter. Pockets The opening of the individual pockets is controlled using a span stitch overlaid with a thermoplastic sealant to ensure the integrity of the pocket. Each pocket is assembled and sealed individually into the metal header. The filter is tested in accordance with the ASHRAE 52.2 fractional efficiency test method. The suggested temperature limit is 200 F. ULC Class 2. Advantages» High dust holding capacity.» Choice of different pocket configurations and lengths depending on the air volumes.» The pocket filters have a relatively low pressure drop and pockets can be added to provide additional surface area to reduce the pressure drop or resistance.» The pocket filter is shipped with a retaining strap to facilitate installation. Extend the life of your pocket filter by using a MAXI AIR pleated filter. MAXI AIR

Medium & HigEfficiency Pocket Filters AIR PAK Performance Standard dimensions Efficiency (%) Dimensions (HxWxD) Model Number of pockets C.F.M. Initial Resistance (in. Wg.) Final Resistance (in. Wg.) Surface area (sq. ft.) 12x24X21 AP9-24216 6 750 0.77 1.5 23 12x24x29 AP9-24296 6 1000 0.74 1.5 32 24x24x29 AP9-44298 8 2000 0.56 1.5 84 24x24x29 AP9-44296 6 2000 0.75 1.5 63 24x24X21 AP9-44218 8 2000 0.77 1.5 61 90-95 % 24x24X21 AP9-44216 6 1500 0.77 1.5 46 MERV14 24x12x29 AP9-42294 4 1000 0.56 1.5 42 24x12x29 AP9-42293 3 1000 0.76 1.5 31 24x12X21 AP9-42214 4 1000 0.78 1.5 30 24x12X21 AP9-42213 3 750 0.77 1.5 23 24x20x29 AP6-40296 6 1670 0.62 1.5 63 24x20x29 AP9-40295 5 1670 0.76 1.5 52 24x20X21 AP9-40216 6 1670 0.85 1.5 46 24x20X21 AP9-40215 5 1250 0.84 1.5 35 20x20X21 AP9-00215 5 1100 0.81 1.5 32 12x24X21 AP8-24216 6 750 0.70 1.5 23 12x24x29 AP8-24296 6 1000 0.67 1.5 32 24x24x29 AP8-44298 8 2000 0.51 1.5 84 24x24x29 AP8-44296 6 2000 0.68 1.5 63 24x24X21 AP8-44218 8 2000 0.70 1.5 61 24x24X21 AP8-44216 6 1500 0.70 1.5 46 80-85 % 24x12x29 AP8-42294 4 1000 0.51 1.5 42 MERV 13 24x12x29 AP8-42293 3 1000 0.69 1.5 31 24x12X21 AP8-42214 4 1000 0.71 1.5 30 24x12X21 AP8-42213 3 750 0.70 1.5 23 24x20x29 AP8-40296 6 1670 0.57 1.5 63 24x20x29 AP8-40295 5 1670 0.69 1.5 52 24x20X21 AP8-40216 6 1670 0.78 1.5 46 24x20X21 AP8-40215 5 1250 0.77 1.5 35 20x20X21 AP8-00215 5 1100 0.74 1.5 32 12x24X21 AP6-24216 6 750 0.45 1.5 23 12x24x29 AP9-24296 6 1000 0.43 1.5 32 24x24x29 AP6-44298 8 2000 0.33 1.5 84 24x24x29 AP6-44296 6 2000 0.44 1.5 63 24x24X21 AP6-44218 8 2000 0.45 1.5 61 24x24X21 AP6-44216 6 1500 0.45 1.5 46 24x12x29 AP6-42294 4 1000 0.33 1.5 42 60-65 % 24x12x29 AP6-42293 3 1000 0.45 1.5 31 MERV 11 24x12X21 AP6-42214 4 1000 0.46 1.5 30 24x12X21 AP6-42213 3 750 0.45 1.5 23 24x20x29 AP6-40296 6 1670 0.37 1.5 63 24x20x29 AP6-40295 5 1670 0.45 1.5 52 24x20X21 AP6-40216 6 1670 0.50 1.5 46 24x20X21 AP6-40215 5 1250 0.50 1.5 35 20x20X21 AP6-00215 5 1100 0.48 1.5 32 12x24x15 AP4-24156 6 750 0.15 1.5 16 12x24x20 AP4-24206 6 1250 0.19 1.5 22 24x24x20 AP4-44206 6 2000 0.15 1.5 43 24x12x20 AP4-42203 3 750 0.11 1.5 22 40-45 % 24x20x20 AP4-40205 5 1670 0.15 1.5 36 MERV 10 20x20x20 AP4-00205 5 1200 0.13 1.5 31 24x24x15 AP4-44156 6 1000 0.10 1.5 32 24x12x15 AP4-42153 3 750 0.16 1.5 15 24x20x15 AP4-40155 5 1000 0.12 1.5 27 20x20x15 AP4-00155 5 750 0.11 1.5 23 Special sizes are available upon request. Hardy Filtration Inc. reserves the right to make changes without notice.

Paint Booth Arrestors PLEATED FILTERS MAXI AIR Intake Air Filters Description The MAXI AIR pleated air filter uses a fully synthetic media with an ASHRAE 52.2 rating of MERV 8. The synthetic polypropylene media is bonded to a metal backing giving its aerodynamic form. The media pack is enclosed and bonded at all points into a heavy duty, moisture resistant, beverage board frame. The MAXI AIR filter is a very popular choice for roof top and stand alone units and is an ideal upgrade from panel filters that tend to face load. These filters are ideal as prefilters to increase the life of a higher efficient final filter. The pleated configuration allows filtration of particles from 3 to 10 microns such as medium airborne pollutants. Maxi-Air MAXI AIR MAHT SIZE QTY / BOX MA()-21620 MAHT-21620 16" X 20" X2" 12 MA()-21625 MAHT-21625 16" X 25" X2" 12 MA()-22020 MAHT-22020 20" X 20" X2" 12 MA()-22025 MAHT-22025 20" X 25" X2" 12 MA()-22424 MAHT-22424 24" X 24" X2" 12 MA()-41620 MAHT-41620 16" X 20" X 4" 6 MA()-41625 MAHT-41625 16" X 25" X 4" 6 MA()-42020 MAHT-42020 20" X 20" X 4" 6 MA()-42025 MAHT-42025 20" X 25" X 4" 6 MA()-42424 MAHT-42424 24" X 24" X 4" 6 () add # 10, 15 or HT MAHT Available Models MA-10 MA-10 filter is designed for commercial and industrial uses requiring a longer life and lower cost. MA-15 MA-15 filter has more surface area and will have a longer life with a lower resistance with its MERV8 rating. MA15 MRV 11 The use of these filters will greatly enhance the efficiency of the system without any physical changes to the system. MAHT High temperature pleated filter employs a fiber glass media element to withstand temperatures up to 400 F.

High Efficiency Final Stage Paint Arrestor CUBAIR Description The Cube filters are manufactured of high quality polyester fibers in two layer (CMST) or three layer (CMDG) configurations. The polyester is sealed around an internal support wire and is self sealing. An integrated adhesive on the air leaving side assures no dust migration. Characteristics Model CMST» Non-allergenic.» Integrated adhesive.» Will not support microbial growth.» Unaffected by moisture. Advantages» Extended surface area.» Synthetic media composed of three filtration stages (CMDG).» One piece internal support wire.» Self-sealing.» Designed to fit any existing system. Application Model CMDG» Used as the final stage in a paint booth where high efficiency is required.» Can be used behind various prefilters as fiber glass, paper or ANDREAE» Arrestance is 99% and more.

High Efficiency Final Stage Paint Arrestor CUBAIR Performance Standard dimensions DIMENSIONS H x W x D PART NO. CMST PART NO. CMDG CAPACITY 500 PPM CAPACITY 300 PPM 20 X 20 X 12 CMST 122020 CMDG 122020 850 510 10 24 X 20 X 12 CMST 122420 CMDG 122420 1000 600 10 24 X 24 X 12 CMST 122424 CMDG 122424 1200 720 10 20 X 25 X 12 CMST 122025 CMDG 122025 1050 650 10 25 X 20 X 12 CMST 122520 CMDG 122520 1050 650 10 20 X 20 X 15 CMST 152020 CMDG 152020 1050 650 8 12 X 24 X 15 CMST 151224 CMDG 151224 750 450 8 24 X 12 X 15 CMST 152412 CMDG 152412 750 450 8 24 X 24 X 15 CMST 152424 CMDG 152424 1500 900 8 25 X 20 X 15 CMST 152520 CMDG 152520 1300 780 8 20 X 20 X 20 CMST 202020 CMDG 202020 1400 850 6 12 X 24 X 20 CMST 201224 CMDG 201224 1000 600 6 24 X 24 X 20 CMST 202424 CMDG 202424 2000 1200 6 20 X 25 X 20 CMST 202025 CMDG 202025 1750 1050 6 QTY BOX Special sizes available upon request. Technical information PRODUCTS VELOCITY EFFICIENCY Initial pressure (in. Wg) Final pressure (in. Wg.) CMST 500 PPM MERV 6 0.12 1.0 CMDG 500 PPM MERV 7 0.16 1.0 RESISTANCE 0.25 Temperature limit 200 F 0.2 0.15 0.1 0.05 RESISTANCE IN. WG. 0 246 370 492 615 VELOCITY FPM CMDG CMST Hardy Filtration Inc. reserves the right to make changes without notice.

Paint Booth Arrestors PAPER COLLECTORS Overspray Collectors Description The element is constructed of layers of expanded paper. The progressive density of the filter allows for a high paint holding capacity. The high efficiency product incorporates a layer of polyester on the air leaving side of the filter. Standard dimensions STANDARD 3000 SERIES Part no. Dimensions Qty/Pkg 3031 20" x 25" Standard 70P/Ctn 3032 20" x 20" Standard 70P/Ctn 3051 6' x 45" Standard 6P/Bag 3052 7' x 45" Standard 5P/Bag 3053 8' x 45" Standard 4P/Bag High capacity 3100 SERIES Part no. Dimensions Qty/Pkg 3131 20" x 25" High Capacity 30P/Ctn 3132 20" x 20" High Capacity 30P/Ctn 3151 6' x 45" High Capacity 4P/Sac 3152 7' x 45" High Capacity 3P/Sac 3153 8' x 45" High Capacity 3P/Sac High Efficiency 3200 SERIES Part no. Dimensions Qty/Pkg 3231 20" x 25" High Efficiency 60P/Ctn 3232 20" x 20" High Efficiency 60P/Ctn 3251 6 'x 45" High Efficiency 5P/Bag 3252 7' x 45" High Efficiency 4P/Bag 3253 8' x 45" High Efficiency 4P/Bag High Capacity / High Efficiency 3400 SERIES Part no. Dimensions Qty/Pkg 3451 6 'x 45" High Capacity/High Efficiency 4P/Bag 3452 7 'x 45" High Capacity/High Efficiency 4P/Bag 3453 8' x 45" High Capacity/High Efficiency 3P/Bag

PaintStop Fiberglass Arrestors MSA22 PaintStop Paint Arrestors PaintStop Paint Arrestors protect the spray booth exhaust system, as well as the outside environment, while reducing paint booth operating costs. PaintStop Paint Arrestors are widely used because they deliver many advantages:» High-lofted fibers trap heavy, wet paint particles as well as dry contaminants before they go up the stack and into the fans reducing fan maintenance and operating costs.» They hold unparalleled amounts of solids before needing to be changed resulting in less downtime and lower paint arrestor costs.» They handle any of the new coatings allowing you to stay out front of the competition. MSA22 - Description Down draft media of choice in North American and European markets. MSA-22 fiberglass media is constructed using 22 grams of fiberglass media per square foot. The fibers are formed into progressively denser layers. Fiberglass media is ideal for capturing paint overspray due to its ability to maintain an open outer layer. It is this initial outer layer that allows the entire depth of the media to hold paint particulate and not surface load like many overspray collectors. The media is solid yellow and has white backing on the downstream side. Fiberglass media is ideal for shipping, the media has 100% memory when compressed, therefore the rolls are tightly wound and when unrolled to use in your booth, the filter regains its 2½ loft. MSA-22 fiberglass media comes in roll form of 300 foot lengths and various widths to accommodate most paint booths. If your downdraft booth uses a pit, measure the width of the pit to find the appropriate roll, or check our booth guide. To change the media, simply unwind the roll to the proper length and cut.

PaintStop Fiberglass Arrestors MSA22 Description Standard dimensions DIMENSIONS PART NO. PACKING 25" X 300' x 2 1/2 MSA22-25300 1 28" X 300' x 2 1/2 MSA22-28300 1 30" X 300' x 2 1/2 MSA22-30300 1 32" X 300' x 2 1/2 MSA22-32300 1 36" X 300' x 2 1/2 MSA22-36300 1 40" X 300' x 2 1/2 MSA22-40300 1 42" X 300' x 2 1/2 MSA22-42300 1 Comparison of the PaintStop MSA22 versus other popular floor exhaust products. Efficiency MSA22 As one can see from the comparison charts the MSA22 has the highest efficiency and although it does not have the highest paint holding capacity, it is the best value for the cost of pound of paint retained. Paint Pocket MSA 14gr Paper 96.5% 97.0% 97.5% 98.0% 98.5% 99.0% 99.5% 100.0% Paper MSA 14gr Paint Pocket MSA22 Another very important point is the cost of shipping. The other products on the market whether it be paper or polyester can be very bulky to ship. Because Fiberglass has memory it can be compressed into a very tight roll for shipping. 1.8 2.3 PaintStop Fiberglass Arrestors Paint Holding Comparison Price per Lb of paint $1.39 BEST BUY Your savings on freight costs can be 5-7 times less than that of shipping the other products. 0.8 0.85 $0.60 $0.25 $0.17 $0.39 $0.33 $0.21 $0.14 Paint/lbs/sq.ft. Price/sq.ft. Price vs lb of paint MSA22 MSA 14gr Paint Pocket Paper Hardy Filtration Inc. reserves the right to make changes without notice.

PaintStop Fiberglass Arrestors MSA / PA14 / PA18 Fiber Glass Paint Arrestors Fiber Glass Paint Arrestors protect the spray booth exhaust system, as well as the outside environment, while reducing paint booth operating costs. PaintStop Paint Arrestors are widely used because they deliver many advantages:» High-lofted fibers trap heavy, wet paint particles as well as dry contaminants before they go up the stack and into the fans reducing fan maintenance and operating costs.» They hold unparalleled amounts of solids before needing to be changed resulting in less downtime and lower paint arrestor costs. MSA Rolls / PA14 Pads - Description MSA fiberglass media is constructed using 14 grams of fiberglass media per square foot. The fibers are formed into progressively denser layers. Fiberglass media is ideal for capturing paint overspray due to its ability to maintain an open outer layer. It is this initial outer layer that allows the entire depth of the media to hold paint particulate and not surface load like many overspray collectors. The media is green and has white backing on the downstream side. Fiberglass media is ideal for shipping, the media has 100% memory when compressed, therefore the rolls are tightly wound and when unrolled to use in your booth, the filter regains its 2½ loft. MSA fiberglass media comes in roll form of 300 foot lengths and various widths to accommodate most paint booths. PA14 pads are shipped in boxes containing 4-25 pad vacuum packed packages, reducing the box size for reduced shipping costs If your downdraft booth uses a pit, measure the width of the pit to find the appropriate roll, or check our booth guide. To change the media, simply unwind the roll to the proper length and cut. Standard Dimensions : DIMENSIONS PART NO. PACKING 25" X 300' x 2 1/2 MSA-25300 1 28" X 300' x 2 1/2 MSA-28300 1 30" X 300' x 2 1/2 MSA-30300 1 32" X 300' x 2 1/2 MSA-32300 1 36" X 300' x 2 1/2 MSA-36300 1 40" X 300' x 2 1/2 MSA-40300 1 42" X 300' x 2 1/2 MSA-42300 1 20 X 20 X 2 1/2 PA14-2020 100 20 X 25 X 2 1/2 PA14-2025 100 20 X 20 X 2 1/2 PA18-2020 100 20 X 25 X 2 1/2 PA18-2025 100 Hardy Filtration Inc. reserves the right to make changes without notice.

PaintStop Fiberglass Arrestors MSA & PA14 ASHRAE Tests Hardy Filtration inc. reserves right to make changes without notice.

Paint Booth ANDREAE FILTERS The best solution for paint particles (over spray) Andreae Filters Advantages:» Working principle: Separation by inertia.» No face-loading.» Better airflow into Paint Booth.» Giving a holding capacity 3 to 5 times higher than most common mesh filter» The most easy to use on the market.» Take up less space for storage.» 270 pi² filtration surface, 36 x 30', 1/box.» Best purchase for your money» Filtration efficiencies up to 99.8% with AF913 series.» Meet or exceed local regulations. Filtering is not only the interception of particles in an air stream with a succession of wider to smaller meshed apertures. Andreae filters use another principle: Inertia Separation The paint laden airflow in transit through the filter is repeatedly subjected to several radical changes of direction. Particles by their mass are then ejected out of the air flow during changes of direction.

Paint Booth ANDREAE FILTERS Installation Reference Std White AF813 Size: 3' x 30' (1 per box) *AF213 Size: 20"h x 20"w (40 per box) *AF413 Size: 20"h x 25"w (36 per box) Reference White AF923 Size: 3'h x 30'w (1 per box) *AF223 Size: 20"h x 20"w (36 per box) *AF423 Size: 20"h x 25"w (32 per box) Espacer 8'' x 96'' En haut et bas Moulure-8-H 2 Fois 36" ID ANDREAE 88" 72'' ANDREAE Moulure du haut Moulure-8-B 2 Fois Frame Grid Direction D'air ANDREAE Cadrage Existant 96'' INSTALLATION TYPIQUE Moulure-V Fixé sur mur 2 Fois Andreae Filters ANDREAE Vue du Haut Rivet ou Vis Tête Ronde Andreae Installation Moulure du bas Vue du Côté INSTALLATION DES MOULURES POUR LES FILTRES ANDREAE 36'' DESSIN: ANDREAE 011206 DATE 12/01/06 Existing frame installation Drawing for complete Paint Booth Installation with Andrea filter 36' height

Types of Paint Booth Cross-Draft MSA22 Semi Cross-Draft MSA22

Types of Paint Boths Down-Draft MSA22 Semi-Down-Draft AMAC-2 AMAC-2 MSA22