Filterbags FILTRATION & SEPARATION
Markets and field of application Field of applications High viscose fluids: resins, varnish, adhesives, petrochemical products Water: industrial process water, river water, sea water, drinking water, desalted water, circulation water Food and beverage: juices, wine, beer Chemicals: acids, lyes, solvents Oils: mineral oil, synthetic oils, vegetable oil, hydraulic oil, lube oil, gear oil Markets chemical industry paper industry pulp industry water filtration environmental technology automotive industry surface technology plastics electronic industry pharma industry paint industry
NEEDLEFELT BAGS Features Filtermedia manufacturing of high quality needlefelt seam: ultrasonic welded seam (standard), or stiched seam ring design: Polysnap ring (Polyester or Polypropylen), zink coated or stainless steel mounting: ultrasonic welding or stiched nominal filterfineness, retention rates up to 85% FDA conformity, free of silicone and other types of contamination high flow rates, low pressure drop high contaminant retention capacity, extended service life temperatures: 80 C 100 C Polypropylen 130 C - 160 C Polyester 200 C needlefelt high temperature resistant PPSG PESG PPE PEE PPX PEX PEB MTX Polypropylen needlelfelt glazed Polyester needlefelt glazed Polypropylen needlefelt, extended life (incl. protective cover) Polyester needlefelt, extended life (incl. protective cover) Polypropylen needlefelt, more layer, asymmetric structure, incl. protective layer Polyester needlefelt, more layer, asymmetric structure, incl. protective layer Polyester needlefelt glazed, no FDA conformity (low cost) needle felt, high temperature resistant Type code LT - PPSG - 001 - WS - SS - 2 brand filtermaterial filterfineness seam design ring design size LT: Lenzing Technik PPSG: Polypropylen needlefelt 001: 1µm WS: welded seam SS: zink plated steel ring PESG: Polyester needlefelt 005: 5µm (standard) ST: AISI 304 stainless steel PPE: Polypropylen needlefelt, extended life 010: 10µm SE: stiched seam PLK: Polypropylen Polysnap PEE: Polyester needlefelt, extended life 025: 25µm ELK: Polyester Polysnap PPX: Polypropylen needlefelt, more layer 050: 50µm PD: Polypropylen double seal PEX: Polyester needlefelt, more layer 075: 75µm (only size 5) PEB: Polyester needlefelt, no FDA conformity 100: 100µm MTX: needlefelt, high temperature resistant only in 5 µm, 10µm und 25µm available 1: 0,25 m 2 2: 0,5 m 2 3: 0,09 m 2 4: 0,15 m 2 5: 0,25 m 2 special design available on request
MICROFIBER BAGS Features Filtermedia manufacturing of high quality Polypropylen microfiber seam: ultrasonic welded seam (standard), or stiched seam ring design: Polysnap ring (Polyester or Polypropylen), zink coated or stainless steel mounting: ultrasonic welding or stiched semi absolute filterfineness, retention rates higher than 90% FDA conformity, free of silicone and other types of contamination high contaminant retention capacity, extended service life high adsorbtive properties temperatures: 80 C 100 C PPAB Polypropylen microfiber and Polypropylen needlefelt (more layer structure) Type code LT - PPAB - 001 - WS - SS - 2 brand filtermaterial filterfineness seam design ring design size LT: Lenzing Technik PPAB: Polypropylen microfiber 001: 1µm WS: welded seam SS: zink plated steel ring 002: 2µm (standard) ST: AISI 304 stainless steel 1: 0,25 m 2 005: 5µm SE: stiched seam PLK: Polypropylen Polysnap 2: 0,5 m 2 010: 10µm PD: Polypropylen double seal (only size 5) 025: 25µm 050: 50µm 100: 100µm 3: 0,09 m 2 4: 0,15 m 2 5: 0,25 m 2 special design available on request 4
ABSOLUTE RATED BAGS Features Filtermedia manufacturing of high quality Polypropylen microfiber seam: ultrasonic welded seam ring design: Polysnap ring (Polyester or Polypropylen), zink coated or stainless steel mounting: ultrasonic welding or stiched absolute filterfineness, retention rates 98% FDA conformity, free of silicone and other types of contamination high contaminant retention capacity, extended service life high adsorbtive properties temperatures: 80 C 100 C APM Polypropylen microfiber and monofilament layer outside Type code LT - APM - 001 - WS - SS - 2 brand filtermaterial filterfineness seam design ring design size LT: Lenzing Technik APM: Polypropylen microfiber, more layer S5: 0,5µm WS: welded seam (standard) 001: 1µm PLK: Polypropylen Polysnap 1: 0,25 m 2 005: 5µm 2: 0,5 m 2 010: 10µm 025: 25µm 3: 0,09 m 2 050: 50µm 4: 0,15 m 2 5: 0,25 m 2 special design available on request 5
MONOFILAMENT BAGS Features Filtermedia manufacturing of high quality Nylon, Polyester or Polypropylen monofilament. Specials designs including additional needlefelt available. seam: high quality seam including stiched off sealing tape. ring design: Polysnap ring (Polyester or Polypropylen), zink coated or stainless steel mounting: ultrasonic welding or stiched absolute filterfineness, retention rates 98% FDA conformity, free of silicone and other types of contamination high tensile strength high flow rates, low pressure drop high contaminant retention capacity, extended service life temperatures: 80 C 100 C Polypropylen 130 C - 160 C Polyester 100 C 135 C Nylon Type code NLM PEM PPM NMX EMX PMX NMB EMB Nylon monofilament Polyester monofilament Polypropylen monofilament Nylon monofilament and Polypropylen needlefelt (protective layer) Polyester monofilament and Polyester needlefelt (protective layer) Polypropylen monofilament and Polypropylen needlefelt (protective layer) Nylon monofilament, no FDA conformity (low cost) Polyester monofilament, no FDA conformity (low cost) LT - NLM - 001 - WS - SS - 2 brand filtermaterial filterfineness seam design ring design size LT: Lenzing Technik NLM: Nylon monofilament NLM : 5 µm to 800 µm WS: welded seam SS: zink plated steel ring PEM: Polyester monofilament PEM: 30 µm to 800 µm (standard) ST: AISI 304 stainless steel PPM: Polypropylen monofilament PPM: 100 µm to 600 µm SE: stiched seam PLK: Polypropylen Polysnap NMX: Nylon monofilament + needlefelt NMX: 5µm to 300 µm ELK: Polyester Polysnap EMX: Polyester monofilament + needlefelt EMX: 35 µm to 350 µm PD: Polypropylen double seal PMX: Polypropylen monofilament + needlefelt PMX: 100 µm to 600 µm (only size 5) NMB: Nylon monofilament, no FDA conformit NMB: 10µm to 1.000 µm EMB: Polyester monofilament, no FDA conformit EMB: 125 µm to 1.900 µm 1: 0,25 m 2 2: 0,5 m 2 3: 0,09 m 2 4: 0,15 m 2 5: 0,25 m 2 6 special design available on request
SPECIAL FILTERBAGS Active Carbon Filterbags TYPE LT-ACB active carbon media multiple composite layer profile filter characteristic: absorption of paint-, taste- and odor residues, removal of free chlorine or ozone, removal of disinfectant and other organics. ring design: same as standard bags seam: ultrasonic welding FDA conformity, free of silicone and other types of contamination Temperature: 80 C to 100 C Designer filterbags customer specific manufacturing combined appropriate filter medias according to application requirements nominal and absolute rated filterfineness designed for depth or surface filtration seam and ring design custom tailor made Pleated filterbags: Filtermedia: PXP Polypropylen needlefelt EXP Polyester needlefelt OAP Polypropylen microfiber and needlefelt AXP absolute rated filterbag, Polypropylen microfiber Features: pleated material for increase of (approx. 2,5 fold of standard bag) FDA conformity, free of silicone and other types of contamination temperatures: 130 C 160 C Polyester 80 C 100 C Polypropylen high contaminant retention capacity, extended service life high flow rates, low pressure drop 7
0908 subject to change, misprint and errors excepted. FILTRATION & SEPARATION Distribution: LENZING TECHNIK GMBH Filtration & Separation 4860 Lenzing. Austria Phone: +43 (0)7672 701-3479 Fax: +43 (0)7672 918-3479 E-Mail: filter-tech@lenzing.com Internet: www.lenzing-filtration.com