Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Female able ssemblies Male P onnectors Male able onnectors Male able ssemblies Tooling
Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining, this range brings the best of the high-reliability specifications to a smaller size. Gecko provides a low-profile, dual-row solution for all variations of cable-to-board, board-to-board and cable-to-cable interconnect requirements. With up to 50 contacts per connector, but still capable of 2 per contact, Gecko gives both significant weight and space-saving advantages over Micro-D connections. The Gecko range offers either latching connectors, for maximum weight and space-saving, or Screw-Lok connectors for maximum mating strain relief. GEKO 2 per contact (all electrically loaded; 2.8 per individual contact) 4-finger Patented* contact design to maintain electrical contact through high vibration and shock eryllium opper ontact for improved temperature range: -65 to +150 1,000 Mating cycles durability Weight and Space-saving over Micro-D connector products Future-proofed Materials - Halogen-free, PFOS-free, SVH-free and RoHS compliant Low outgassing properties - 0.68% TML, 0.01% VM, 0.26 WVR (Water Vapour Recovered) ll P connectors available in Tape and Reel for automation *Granted US9017089, Pending G2501063, Pending EP2642604 Gecko Screw-Lok Gecko with Latches Strong stainless-steel screw fixings for maximum strain relief Lightweight hoods for additional cable protection and shielding Pre-wired contacts available for prototyping and pre-production The maximum weight and space saving, designed with lightweight robust latches for minimal P real estate Product range includes complete cable assemblies, ideal for prototyping and pre-production 18
Gecko onnectors Product Features GEKO Four Finger eryllium opper ontact Unique patented pending high-reliability contact design ensures signal integrity under extremes of bump, vibration and shock. Durable to over 1,000 mating cycles. Keyway Polarisation Points 3 polarising points on each component prevent mis-mating. No. 1 Position identified, Potting Wall Housings are clearly marked with identifier for fast visual inspection. able connectors feature a rear potting wall adding an extra level of strain relief. Packaged in Tape & Reel ll connectors for P assembly are available packaged in industry standard Tape and Reel format for automated assembly. Gecko Screw-Lok - Robust Metal ackshells Lightweight aluminium hoods / backshells available for all connector sizes from stock. Supplied with tie-bands to attach external braiding for shielded cable assemblies. Gecko with Latches - Pre-assembled able onfigurations able connectors supplied in ready-made cable assemblies. Single and double-ended configurations available in standard lengths off-the-shelf, or custom assemblies on request. Gecko Screw-Lok - Maximum strain relief Fixings with 2mm screw thread for maximum board and connection retention or strain relief. Gecko with Latches - ombined Latching & P retention Optional latches allow simple and fast de-latching and require no special tooling. Solder tabs for SMT and barbs for P Tail versions ensure retention to the P. 19
Gecko onnectors Specifications Materials Mouldings: Female contacts: Male contacts PT/SMT: rimp: Finish: Screw-Loks: Latches: Electrical urrent Individual contacts in isolation: ll contacts simultaneously: Working voltage t sea level 1006 mbar: t altitude 44 mbar: Voltage proof t sea level 1013 mbar: ontact resistance Initial: fter conditioning: Insulation resistance Initial: fter conditioning: Glass-filled High Temperature Thermoplastic UL94V-0 eryllium opper Phosphor ronze rass 0.2 0.3μm (8 12μ") Gold, over 1.5 2.0μm (60 80μ") Nickel Stainless Steel opper lloy 2.8 max (t 25 ) 2.0 max (t 25 ) 450V D or peak 250V D or peak 600V D or peak 20mΩ max 25mΩ max 10GΩ min at 500V D >1GΩ min at 500V D Pin Numbering Mechanical ontact durability: 1000 operations Mating forces (per contact pair) Insertion force: 2.8N max Withdrawal force: 0.2N min ontact retention in moulding: 6N min Environmental Environmental classification: Operating temperature: *Vibration sensitivity: *ump severity: *Shock severity: *cceleration severity: 65/150/56 days at 93% RH -65 to +150 10Hz to 2000Hz, 1.5mm, 198mm/s 2 (20G) duration 6 hours 390m/s 2 (40G), 4000 ±10 bumps 981m/s 2 (100G) for 6ms in Z axis 490m/s 2 (50G) for 11ms in X & Y axes 490m/s 2 (50G) * Tested with latched connectors. GEKO FEMLE MLE 6 1 10 5 7 1 6 12 12 5 1 10 6 7 1 6 20
Gecko Screw-Lok Mating Profiles FEMLE GEKO SREW-LOK VERTIL P TIL VERTIL P TIL VERTIL SMT LE 7.25 7.33 9.90 max MLE VERTIL SMT 7.33 7.40 10.05 max LE 11.00 max 11.15 max 13.48 max 21
Gecko Screw-Lok onnectors Female P Tail 4-finger eryllium opper contact. Stainless steel screw fixing to mate with applicable male connector. Positive keyway polarisation features. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. GEKO SREW-LOK 3mm P TIL LULTION + 12.7 0.625 x (Total No. of contacts - 2) + 7.8 D + 1.8 M2 5.25 3.90 D No. 1 contact 2.00 Ø3.30 3.00 Ø3.00 Ø0.40 1.5 /F HEX Ø0.55 Recommended P oard Pattern G125 - F V1 XX 05 F1 X PKGING R Tape & Reeled P Loose TYPE V1 3mm P Tail 05 Gold TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 22
Gecko Screw-Lok onnectors Female Surface Mount GEKO SREW-LOK 4-finger eryllium opper contact. Stainless steel screw fixing to mate with applicable male connector. Positive keyway polarisation features. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. vailable in Tape and Reel Packaging, with Pick and Place cap. SURFE MOUNT LULTION + 12.7 0.625 x (Total No. of contacts - 2) + 7.8 D + 1.8 M2 3.90 5.25 D No. 1 contact 0.15 max 2.00 Ø3.00 5.80 Ø0.40 1.5 /F HEX 1.20 Ø3.30 6.20 0.70 Recommended P oard Pattern G125 - F S1 XX 05 F1 X PKGING R Tape & Reeled P Loose TYPE S1 Surface Mount 05 Gold TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 23
Gecko Screw-Lok onnectors Female rimp Housings Features 2.5mm potting wall for extra security. No. 1 position identified on moulding. 3 polarising points on each housing prevent mis-mating. vailable without fixing screws, for use with metal hoods shown on a following page. Use with female crimp contacts and pre-cabled contacts shown on following pages. GEKO SREW-LOK FEMLE LULTION + 12.7 0.625 x (Total No. of contacts - 2) + 7.8 6.50 D + 1.8 D No. 1 contact M2 3.90 7.60 2.00 Ø3.00 1.5 /F HEX TOOLS Recommended rimp Tool Z125-900 Positioner Z125-901 ontact Insertion/Removal Tool Z125-902 Female contacts shown on following pages. Instruction sheets available at /instructions. G125 224 XX 96 XX TYPE 224 Female Housing TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 LTHES F1 Floating Hex Socket fixings 00 No fixings (use with Metal Hoods) 96 Housing 24
Gecko Screw-Lok onnectors Female rimp ontacts, Dummy ontact GEKO SREW-LOK 4-finger eryllium opper contact on a female connector. rimp barrel meets all crimp guidelines and standards. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. Instruction video online at /harwintv. Dummy ontact can be used for additional polarisation of keying of multiple connectors. lso called lanking Plug. ONTTS DUMMY ONTT 26 WG 4.45 3.50 28 32 WG WIRE STRIPPING DETILS Ident Groove 26 WG - Ø0.80 max 28 to 32 WG - Ø0.72 max 1.50 to 1.75 TOOLS Recommended rimp Tool Z125-900 Positioner Z125-901 ontact Insertion/Removal Tool Z125-902 Female crimp housing shown on previous page. Pre-cabled contacts shown on following page. Instruction sheets available at /instructions. G125 0XX 00 05 TYPE 001 Female 26 WG crimp contact 002 Female 28-32 WG crimp contact 020 Dummy ontact (blanking plug) 05 Gold 25
Gecko Screw-Lok onnectors Female rimp ontacts Pre-rimped Wires 4-finger eryllium opper contact. Ready for assembling to housing. rimp barrel meets all crimp guidelines and standards. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. For non-standard cable lengths, please visit harwin.com/cable-assemblies and fill in your requirements. GEKO SREW-LOK FEMLE SINGLE ENDED FEMLE FEMLE able Length able Length TOOLS ontact Insertion/Removal Tool Z125-902 Female crimp housing and loose contacts shown on previous pages. Instruction sheets available at /instructions. G125 F WX XXXX X 94 GENDER - FIRST END F Female LE SIZE W1 26 WG W2 28 WG W3 30 WG W4 32 WG LE OLOUR 94 White TERMINTION - SEOND END L Loose cut end F Female LE LENGTH 0150 150mm 0300 300mm (double-ended) 0450 450mm (single-ended) 26
Gecko Screw-Lok onnectors Female Metal Hood / ackshell GEKO SREW-LOK Supplied as a kit, including 2 metal hood halves, tie-band (not shown), extended fixing screws for female connectors, and short screws to join the two hood halves together. Use with G125-224xx9600 female crimp housings without fixings - fixings are supplied with these hoods. Tie-band can be used to attached external braid, to construct a shielded cable assembly. HOOD / KSHELL D 6.20 LULTION + 16.8 0.625 x (Total No. of contacts - 2) + 7.8 D + 4.3 23.80 1.5 /F HEX 9.60 M2 6.60 7.00 G125-964 XX F1 TOTL NO. OF ONTTS 06, 10, 12, 16 27
Gecko Screw-Lok onnectors Male Vertical P Tail Stainless steel screw fixing to mate with applicable female connector. Order nuts for board-mount separately - see bottom of page. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. GEKO SREW-LOK P TIL LULTION + 12.7 0.625 x (Total No. of contacts - 2) + 7.8 M2 No. 1 contact Ø2.20 Ø0.40 3.00 5.00 M2 Ø0.55 Recommended P oard Pattern TYPE V1 3mm P Tail TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 G125 M V1 XX 05 M2 X PKGING R Tape & Reeled P Loose 05 Gold REQUIRED HRDWRE Order separately from connector Hexagonal oard Mount Nut Slotted oard Mount Nut 1.60 Ø4.00 M2 M2 4.00 /F ORDER ODE ORDER ODE G125-4500000 3.00 G125-4510000 28
Gecko Screw-Lok onnectors Male Vertical Surface Mount GEKO SREW-LOK Stainless steel screw fixing to mate with applicable female connector. Order nuts for board-mount separately - see bottom of page. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. SURFE MOUNT LULTION + 12.7 0.625 x (Total No. of contacts - 2) + 7.8 M2 No. 1 contact 1.20 Ø2.20 6.20 Ø0.40 0.15 max M2 6.10 0.70 Recommended P oard Pattern TYPE S1 Surface Mount TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 G125 M S1 XX 05 M2 X PKGING R Tape & Reeled P Loose 05 Gold REQUIRED HRDWRE Order separately from connector Hexagonal oard Mount Nut Slotted oard Mount Nut 1.60 Ø4.00 M2 M2 4.00 /F ORDER ODE ORDER ODE G125-4500000 3.00 G125-4510000 29
Gecko Screw-Lok onnectors Male rimp Housing Features 2.5mm potting wall for extra security. No. 1 position identified on moulding. 3 polarising points on each housing prevent mis-mating. Use with male crimp contacts and pre-cabled contacts shown on following pages. GEKO SREW-LOK MLE LULTION + 12.7 0.625 x (Total No. of contacts - 2) + 7.8 M2 No. 1 contact 8.40 6.50 TOOLS Recommended rimp Tool Z125-900 Positioner Z125-901 ontact Insertion/Removal Tool Z125-902 Male contacts shown on following pages. Instruction sheets available at /instructions. G125 324 XX 96 M1 TYPE 324 Male Housing 96 Housing TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 30
Gecko Screw-Lok onnectors Male rimp ontacts, Dummy ontact GEKO SREW-LOK rimp barrel meets all crimp guidelines and standards. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. Instruction video online at /harwintv. Dummy ontact can be used for additional polarisation of keying of multiple connectors. lso called lanking Plug. ONTTS DUMMY ONTT 26 WG 5.20 3.50 28 32 WG WIRE STRIPPING DETILS Ident Groove 26 WG - Ø0.80 max 28 to 32 WG - Ø0.72 max 1.50 to 1.75 TOOLS Recommended rimp Tool Z125-900 Positioner Z125-901 ontact Insertion/Removal Tool Z125-902 Male crimp housing shown on previous page. Pre-cabled contacts shown on following page. Instruction sheets available at /instructions. G125 XXX 00 05 TYPE 101 Male 26 WG crimp contact 05 Gold 102 Male 28-32 WG crimp contact 020 Dummy ontact (blanking plug) 31
Gecko Screw-Lok onnectors Male rimp ontacts Pre-rimped Wires Ready for assembling to housing. rimp barrel meets all crimp guidelines and standards. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. For non-standard cable lengths, please visit harwin.com/cable-assemblies and fill in your requirements. GEKO SREW-LOK MLE SINGLE ENDED MLE MLE able Length able Length MLE FEMLE TOOLS ontact Insertion/Removal Tool Z125-902 able Length Male crimp housing and loose contacts shown on previous pages. Instruction sheets available at /instructions. GENDER FIRST END M Male LE SIZE W1 26 WG W2 28 WG W3 30 WG W4 32 WG G125 M WX XXXX X 94 LE OLOUR 94 White TERMINTION SEOND END L Loose cut end F Female M Male LE LENGTH 0150 150mm 0300 300mm (double-ended) 0450 450mm (single-ended) 32
Gecko Screw-Lok onnectors Male Metal Hood / ackshell GEKO SREW-LOK Supplied as a kit, including 2 metal hood halves, tie-band (not shown), and short screws to join the two hood halves together. Use with G125-324xx96M1 male crimp housings. Tie-band can be used to attached external braid, to construct a shielded cable assembly. HOOD / KSHELL D 6.20 LULTION + 16.8 0.625 x (Total No. of contacts - 2) + 7.8 D + 4.3 23.80 1.5 /F HEX 9.60 6.60 7.00 G125-964 XX 00 TOTL NO. OF ONTTS 06, 10, 12, 16 33
Gecko with Latches Mating Profiles FEMLE VERTIL P TIL VERTIL P TIL VERTIL SMT LE 7.25 7.35 8.00 max GEKO WITH GEKO LTHES HORIZONTL P TIL 8.50 8.60 9.45 max MLE VERTIL SMT 7.35 7.45 8.10 max LE 9.10 max 9.20 max 9.70 max 34
Gecko with Latches onnectors Female P Tail GEKO WITH GEKO LTHES 4-finger eryllium opper contact. Positive keyway polarisation features. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. 3mm P TIL 4.5mm P TIL No. 1 contact No. 1 contact 3.90 3.90 5.25 5.25 3.00 4.50 Ø0.40 Ø0.40 Ø0.55 min Recommended P oard Pattern LULTION + 3.8 0.625 x (Total No. of contacts - 2) + 1.8 G125 - F VX XX 05 L0 X Ø0.55 min Recommended P oard Pattern PKGING R Tape & Reeled P Loose TYPE V1 V2 3mm P Tail 4.5mm P Tail 05 Gold TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 35
Gecko with Latches onnectors Female Surface Mount 4-finger eryllium opper contact. Positive keyway polarisation features. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. vailable in Tape and Reel Packaging, with Pick and Place cap. SURFE MOUNT LULTION + 3.8 0.625 x (Total No. of contacts - 2) + 1.8 GEKO WITH LTHES No. 1 contact 1.20 3.90 6.20 5.25 0.70 5.80 Ø0.40 Recommended P oard Pattern 0.15 max G125 - F S1 XX 05 L0 X PKGING R Tape & Reeled P Loose TYPE S1 Surface Mount 05 Gold TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 36
Gecko with Latches onnectors Female rimp Housings GEKO WITH LTHES Features potting wall for extra security. No. 1 position identified on moulding. Withstands extremes of temperature: -65 to +150. 3 polarising points on each housing prevent mis-mating. FEMLE LULTION + 3.8 0.625 x (Total No. of contacts - 2) + 1.8 No. 1 contact 3.90 5.70 TOOLS Recommended rimp Tool Z125-900 Positioner Z125-901 ontact Insertion/Removal Tool Z125-902 Female contacts shown on following pages. Instruction sheets available at /instructions. G125 204 XX 96 L0 LTHES L0 No Latches TYPE 204 Female Housing 96 Housing TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 37
Gecko with Latches onnectors Female rimp ontacts, Dummy ontact 4-finger eryllium opper contact on a female connector. rimp barrel meets all crimp guidelines and standards. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. Instruction video online at /harwintv. Dummy ontact can be used for additional polarisation of keying of multiple connectors. lso called lanking Plug. ONTTS DUMMY ONTT GEKO WITH LTHES 26 WG 4.45 3.50 28 32 WG WIRE STRIPPING DETILS Ident Groove 26 WG - Ø0.80 max 28 to 32 WG - Ø0.72 max 1.50 to 1.75 TOOLS Recommended rimp Tool Z125-900 Positioner Z125-901 ontact Insertion/Removal Tool Z125-902 Female crimp housing shown on previous page. Pre-cabled contacts shown on following page. Instruction sheets available at /instructions. G125 0XX 00 05 TYPE 001 Female 26 WG crimp contact 002 Female 28-32 WG crimp contact 020 Dummy ontact (blanking plug) 05 Gold 38
Gecko with Latches onnectors Female rimp ontacts Pre-rimped Wires GEKO WITH LTHES 4-finger eryllium opper contact. Ready for assembling to housing. rimp barrel meets all crimp guidelines and standards. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. For non-standard cable lengths, please visit harwin.com/cable-assemblies and fill in your requirements. FEMLE SINGLE ENDED FEMLE FEMLE able Length able Length TOOLS ontact Insertion/Removal Tool Z125-902 Female crimp housing and loose contacts shown on previous pages. Full able assemblies shown on following page. Instruction sheets available at /instructions. G125 F WX XXXX X 94 GENDER - FIRST END F Female LE SIZE W1 26 WG W2 28 WG W3 30 WG W4 32 WG LE OLOUR 94 White TERMINTION - SEOND END L Loose cut end F Female LE LENGTH 0150 150mm 0300 300mm (double-ended) 0450 450mm (single-ended) 39
Gecko with Latches onnectors Female able ssemblies 4-finger eryllium opper contact. No. 1 position identified on moulding. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. ack potted for added strain relief. For non-standard cable lengths, please visit harwin.com/cable-assemblies and fill in your requirements. PRT NUMERING SYSTEM GEKO WITH LTHES G125 F X XX 05 L0 - XXXX X TERMINTION - SEOND END L Loose cut end F Female connector GENDER - FIRST END F Female LE SIZE 1 26 WG 2 28 WG 3 30 WG 4 32 WG LE LENGTH 0150 150mm 0300 300mm (double-ended) 0450 450mm (single-ended) LTHES L0 No Latches TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 05 Gold 40
Female able ssemblies GEKO WITH GEKO LTHES See previous page for cable length options. able assemblies are constructed with ontact 1 attached to ontact 1, ontact 2 to ontact 2, etc. FEMLE SINGLE ENDED No. 1 contact able Length ORDER ODE G125-FXXX05L0-XXXXL FEMLE FEMLE No. 1 contact able Length No. 1 contact ORDER ODE G125-FXXX05L0-XXXXF 41
Gecko with Latches onnectors Male Vertical P Tail Secure fixing to the P via retention barbs for through hole. Easy-to-release latches require no tooling. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. P TIL LULTION + 3.8 0.625 x (Total No. of contacts - 2) + 5.5 GEKO WITH GEKO LTHES No. 1 contact 6.80 1.90 + 2.50 Oval holes required for latches Latch Tail 1.00 Ø0.55 Ø0.40 Recommended P oard Pattern G125 M VX XX 05 LX X TYPE V1 3mm P Tail V2 4.5mm P Tail TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 PKGING R Tape & Reeled P Loose LTH L0 No Latch L1 Latch for 1.6mm P (use with V1) L2 Latch for 2.4mm P (use with V2) 05 Gold 42
Gecko with Latches onnectors Male Horizontal P Tail Latched GEKO WITH LTHES Secure fixing to the P via retention barbs for through hole. Surface mount option for automated assembly. Easy-to-release latches tooling available for additional assistance with releasing latches see part numbers Z125-926xx00. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. P TIL LTH SURFE MOUNT LTH No. 1 contact 8.00 5.50 No. 1 contact 8.00 arbs 5.50 Ø0.40 Tail 2.20 Ø0.40 Tail 6.20 6.20 2.00 1.90 Ø0.55 1.00 2.20 Recommended P oard Pattern LULTION + 4.3 0.625 x (Total No. of contacts - 2) + 5.5 Ø0.55 3.15 3.20 2.00 SMT Pads Recommended P oard Pattern G125 M HX XX 05 LX X PKGING R Tape & Reeled TYPE H1 H2 3.3mm P Tail 4.8mm P Tail LTH L1 L2 P Loose arbs for 3.3mm P Tail arbs for 4.8mm P Tail TOTL NO. OF ONTTS L3 Surface Mount Latch 06, 10, 12, 16, 20, 26, 34, 50 05 Gold 43
Gecko with Latches onnectors Male Horizontal P Tail Without Latch Secure fixing to the P via retention barbs for through hole. Surface mount option for automated assembly. 2 current capacity. Withstands extremes of temperature: -65 to +150. P TIL FIXING SURFE MOUNT FIXING GEKO WITH LTHES 6.20 No. 1 contact arbs 5.50 6.20 No. 1 contact 5.50 Ø0.40 Tail 2.20 Ø0.40 Tail 2.00 1.90 Ø0.55 1.00 2.20 Recommended P oard Pattern LULTION + 4.3 0.625 x (Total No. of contacts - 2) Ø0.55 3.15 3.20 2.00 SMT Pads Recommended P oard Pattern TYPE H1 3.3mm P Tail H2 4.8mm P Tail TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 G125 M HX XX 05 LX X PKGING R Tape & Reeled P Loose FIXING L5 arbs for 3.3mm P Tail L6 arbs for 4.8mm P Tail L7 Surface Mount Fixing 05 Gold 44
Gecko with Latches onnectors GEKO WITH LTHES Male Vertical Surface Mount Secure fixing to the P via hold-down tabs (SMT). Easy-to-release latches require no tooling. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. P TIL LTH SURFE MOUNT LTH Ø0.40 Ø0.40 No. 1 contact No. 1 contact 6.80 6.80 Holes required for latches 1.90 + 2.50 1.00 1.20 0.70 Recommended P oard Pattern Latch 6.20 0.15 max 5.80 LULTION + 3.8 0.625 x (Total No. of contacts - 2) + 5.5 + 0.60 End pads required for latches 6.20 1.20 0.15 max + 1.05-1.95 1.85 5.80 0.70 Recommended P oard Pattern TYPE S1 Surface Mount G125 M S1 XX 05 LX X PKGING R Tape & Reeled P Loose TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 05 Gold LTH L0 L1 L2 L3 No Latch Latch for 1.6mm P Latch for 2.4mm P Surface Mount Latch 45
Gecko with Latches onnectors Male rimp Housing Features potting wall for extra security. No. 1 position identified on moulding. Withstands extremes of temperature: -65 to +150. 3 polarising points on each housing prevent mis-mating. Easy to release latches require no tooling. MLE LULTION + 3.8 0.625 x (Total No. of contacts - 2) + 5.5 GEKO WITH LTHES No. 1 contact 8.40 6.50 TOOLS Recommended rimp Tool Z125-900 Positioner Z125-901 ontact Insertion/Removal Tool Z125-902 Male contacts shown on following pages. Instruction sheets available at /instructions. G125 304 XX 96 LX LTH L0 L4 No Latches Latches (Male Only) TYPE 304 Male Housing 96 Housing TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 46
Gecko with Latches onnectors Male rimp ontacts GEKO WITH LTHES rimp barrel meets all crimp guidelines and standards. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. Instruction video online at /harwintv. Dummy ontact can be used for additional polarisation of keying of multiple connectors. lso called lanking Plug. ONTTS DUMMY ONTT 26 WG 5.20 3.50 28 32 WG WIRE STRIPPING DETILS Ident Groove 26 WG - Ø0.80 max 28 to 32 WG - Ø0.72 max 1.50 to 1.75 TOOLS Recommended rimp Tool Z125-900 Positioner Z125-901 ontact Insertion/Removal Tool Z125-902 Male crimp housing shown on previous page. Pre-cable contacts shown on following page. Instruction sheets available at /instructions. G125 XXX 00 05 TYPE 101 Male 26 WG crimp contact 05 Gold 102 Male 28-32 WG crimp contact 020 Dummy ontact (blanking plug) 47
Gecko with Latches onnectors Male rimp ontacts Pre-rimped Wires Ready for assembling to housing. rimp barrel meets all crimp guidelines and standards. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. For non-standard cable lengths, please visit harwin.com/cable-assemblies and fill in your requirements. MLE SINGLE ENDED MLE MLE GEKO WITH LTHES able Length able Length MLE FEMLE TOOLS ontact Insertion/Removal Tool Z125-902 able Length Male crimp housing and loose contacts shown on previous pages. Full able assemblies shown on following page. Instruction sheets available at /instructions. GENDER FIRST END M Male LE SIZE W1 26 WG W2 28 WG W3 30 WG W4 32 WG G125 M WX XXXX X 94 LE OLOUR 94 White TERMINTION SEOND END L Loose cut end F Female M Male LE LENGTH 0150 150mm 0300 300mm (double-ended) 0450 450mm (single-ended) 48
Gecko with Latches onnectors Male able ssemblies GEKO WITH LTHES No. 1 position identified on moulding. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. ack potted for added strain relief. 4-finger eryllium opper contact on the female connector. For non-standard cable lengths, please visit harwin.com/cable-assemblies and fill in your requirements. PRT NUMERING SYSTEM G125 M X XX 05 LX - XXXX X TERMINTION - SEOND END L Loose cut end F Female connector M Male connector GENDER - FIRST END M Male LE SIZE 1 26 WG 2 28 WG 3 30 WG 4 32 WG TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 LE LENGTH 0150 150mm 0300 300mm (double-ended) 0450 450mm (single-ended) LTHES L0 No Latches L4 Latches (male connectors only) 05 Gold 49
Male able ssemblies See previous page for cable length options. able assemblies are constructed with ontact 1 attached to ontact 1, ontact 2 to ontact 2, etc. MLE SINGLE ENDED able Length GEKO WITH GEKO LTHES No. 1 contact ORDER ODE G125-MXXX05LX-XXXXL MLE FEMLE MLE MLE able Length able Length ORDER ODE G125-MXXX05LX-XXXXF ORDER ODE G125-MXXX05LX-XXXXM 50
Gecko onnectors Tooling Instruction sheets can be accessed at /instructions. Gecko rimping Instruction video is available at /harwintv. GEKO HND RIMP TOOL Precision tool with ratchet mechanism and 8-indent form. Must be used with positioner. Instruction sheet available. POSITIONER Must be used with hand crimp tool. ORDER ODE Z125-900 ORDER ODE Z125-901 INSERTION/REMOVL TOOL For inserting and removing crimped contacts into the rear of mouldings. Instruction sheet available. DE-LTH TOOL For assisting with unmating latched connectors. ORDER ODE Z125-902 ORDER ODE Z125-926xx00 Replace xx with No. of ontacts: 06, 10, 12, 16, 20, 26, 34 or 50 51
Gecko onnectors Tooling Instruction sheets can be accessed at /instructions. HEX DRIVE IT 1.5mm /F Hex end for Gecko Screw-Lok Hex Socket fixings. For use with torque tooling or similar equipment. LL HEX DRIVER 1.5mm /F Hex end for Gecko Screw-Lok Hex Socket fixings. all-shaped end can be used at a wide range of angles. GEKO ORDER ODE Z9950-00 ORDER ODE Z9952-00 SREWDRIVER For use with Gecko Screw-Lok board mount nuts. oard mount nuts to be tightened to a torque of 21 ±2cmN. ORDER ODE Z80-298 52