POWER TOOLS Corded & Cordless FLASHLIGHTS TOOL BAGS Milwaukee May 2018 Milwaukee nothing but Heavy Duty. Product Catalog **Wolff Bros. Supply, Inc. reserves the right to substitute like products. Product information is subject to Manufacturer rolling changes and/or typographical errors.
Quality Wholesale Distribution Masterdoc/WBS_General_Capabilities.pub
Masterdoc/WBS_General_Capabilities.pub
Masterdoc/WBS_General_Capabilities.pub
Markers Milwaukee - Inkzall Jobsite Markers Milwaukee Inkzall Job-Site Markers Features clog resistant tips and the ability to write through dusty, wet or oily surfaces. Durable marker tip for writing on concrete, OSB and rough surfaces. Built-In hard hat storage clip. Ink dries in seconds. Lanyard hole. Anti-roll body design. Markers MLT48223102 MLT48223104 MLT48223106 MLT48223123 Inkzall Medium Point Marker (2-Pk) - Black Inkzall Fine Point Marker (4-Pk) - Black Inkzall 4-Pk Fine Point Colored Markers - Black, Red, Blue & Green Inkzall 2-Pk Fine Point Colored Markers - Gold & Silver Pipe & Fittings Pipe - PEX & Fittings Aquapex Tools ProPEX M12 Expansion Tool Kit - MLT243222 Milwaukee 2432-22 - 12V ProPEX Expansion Tool Kit Built-in auto rotate mechanism for effortless, one-handed use. Quick cam mechanism for fast, continuous expansion. Compact, right angle design for use in tight locations. LED work light. Battery fuel gauge displays remaining run-time. Compatible with both compact and XC M12 Lithium-Ion batteries. Capacity: 3/8" - 1". Stroke length: 14mm. Speed: 60 SPM. Head Compatibilty: M12 (rotate) - Uponor (NO rotate). Includes: 2432 ProPEX Expansion Tool, (2) M12 RED LITHIUM Batteries, 30-minute charger, 1/2"-3/4"-1" Heads, Grease, and Carrying Case. MLT243222 Pumps - Utility 3/8" - 1" Capacity - M12V Cordless ProPEX Expansion Tool Kit, w/ Batteries Milwaukee 2771-20 Transfer Pump Milwaukee 2771-20 Transfer Pump Faster Water Transfers, Faster Service Calls. The M18 Transfer Pump brings new to world cordless innovation to the industry with the fastest setup in the marketplace. With a self-priming pump, you can connect and go quicker than ever. The tool s flexible impeller and powerful pump moves water at up to 480 gallons per hour, generates up to 18 of lift and produces up to 75 of head height. As a part of the M18 System of tools, it is powered by REDLITHIUM battery packs, which deliver up to 240 gallons moved per charge on a XC5.0 battery pack. Onboard REDLINK Intelligence can recognize when the tool stops moving water and automatically shuts itself off to avoid dry pumping. Additionally, REDLINK provides optimized performance, and overload protection abusive situations. Self-Priming: connect and go Pumps up to 480 gallons per hour. Lift: Up to 18'. Head Height: Up to 75'. Inlet connection: 3/4" brass. Outlet connection: 3/4" brass. MLT277120 1/2 HP - M18 Transfer Pump, 18V, 480 GPH - 13.2"L X 6"H X 5.75"W Does Not Contain Clearance Items 1
Batteries & Flashlights Flashlights Flashlights - Milwaukee Flashlight - Milwaukee Batteries & Flashlights MLT2105 MLT211021 MLT211121 MLT211221 MLT235520 Milwaukee - Flashlight 2355-20 The M12 LED Metal Flash Light establishes a new benchmark for 12V Flashlights, bringing new levels of versatility, performance and durability to the industry. Its powerful LED produces 800 Lumens of high definition light output, and it can cast a beam beyond 375 yards. The 2355-20's sliding head allows users to adjust their beam pattern from a flood to a spot effortlessly, and it features three output modes for high, low or strobe use. The body is built from machined 6000 Series Aluminum with a type II anodized finish and can handle anything it may encounter through years of professional use. High Mode 800 Lumens 5 Hour Run-Time. 325 Lumens 7 Hours of Run-Time. Length 9" LED Pen Flashlight LED Rechargeable Flashlight LED USB Rechargeable Hard Hat Headlamp LED USB Rechargeable ROVER Pocket Flood Light M12 LED Metal Flashlight Drain Cleaning Equipment Drain - Hand Augers/Snakes Milwaukee - M12 Drain Snake Kit 2571-21 Drain - Hand Augers/Snakes MLT257121 M12 Drain Snake Kit Milwaukee - M12 Trapsnake 4 in Urinal Auger Kit 2574-21 Milwaukee M12 TRAPSNAKE 4' Urinal Auger Kit 2574-21 The Milwaukee 2574-21 M12 Trapsnake 4' urinal auger kit is part of the Trapsnake auger system. It features the M12 Trapsnake driver, the first unit specially designed for porcelain fixtures. It is compatible with all Trapsnake augers. This is the solution for unclogging urinals, toilets, and floor traps. Equipped with the fixed rubber boot, this Milwaukee 2574-21 M12 will not scratch porcelain fixtures. It eliminates the need for a drop head and it spins faster than manually cranked augers which allows the bulb head to behave. This cost-efficient and user-friendly urinal auger kit has replaceable cables that maximizes tool longevity. The patent pending cable lock holds the cable in place for easy telescoping retraction and extension. This Milwaukee 2574-21 M12 12-volt comes with a 5-year tool warranty. For over 85 years, Milwaukee has been offering a variety of innovative and heavy-duty power tools. Includes M12 TRAPSNAKE 4' Urinal Auger, M12 Battery and M12 Charger MLT257421 M12 Trapsnake 4' Urinal Auger Kit Does Not Contain Clearance Items 2
Drain Cleaning Equipment Drain - Hand Augers/Snakes Milwaukee - M12 Trapsnake 6 in Urinal Auger Kit 2576-21 MLT257621 Milwaukee M12 TRAPSNAKE 6' Urinal Auger Kit 2576-21 M12 Trap Snake 6' Toilet Auger is the service plumbers and facility maintenance crew's ideal solution for unclogging toilets and floor traps. Powered by the M12 trap snake Driver, the first powered unit optimized for the challenges of porcelain fixtures, this unit delivers power and speed to work through tough clogs in tight traps, but has optimized electronics that protect the fixture from the auger and allow the user to feel when engaged with a blockage to aid in retrieving. The M12 trap snake 6 ft. Toilet Auger features a number of industry firsts including a fixed rubber boot for maximum porcelain protection, an integrated locking mechanism which holds the cable in place for easy telescoping extension, and replaceable cables to maximize the longevity of the tool. Part of the trap snake Porcelain Auger System, users can interchange the M12 trap snake Driver with the auger handle, or use with other auger attachments for versatility and capabilities never seen before in a closet auger. Includes M12 TRAPSNAKE 6' Urinal Auger, M12 Battery and M12 Charger M12 Trapsnake 6' Urinal Auger Kit Electronic Meters, Instruments & Testers Light Testers Drain Cleaning Equipment Light Testers MLT221020 Fluorescent Lighting Tester, Tests Lamps, Ballasts & Pins Hand Tools & Accessories Knives - Utility & Pocket Milwaukee - Knives - Utility & Pocket Milwaukee - Knives - Utility & pocket MLT48221990 MLT48221996 MLT48255220 7-3/4" Length - Fastback Smooth Folding Pocket Knife 7-3/4" Length - Camo Fastback Smooth Folding Pocket Knife 1-3/8" Switchblade 3 Blade Replacement Kit - 3 Pk Does Not Contain Clearance Items 3
Hand Tools & Accessories Pliers Milwaukee - Pliers Milwaukee 48-22-3079 Gen II Combination Wire Pliers Milwaukee 48-22-3079 Gen II Combination Wire Pliers Features a dual head design for wire stripping and needlenose functionality. Reaming Head Design-Smooth Edges of Metal Pipe from 1/2" to 1". Bolt Cutter-Thread and cut #6 and #8 bolts to prefered length. Strips 8-18 AWG solid wire, 10-20 AWG stranded wire. One handed locking. Pipe Reamer: up to 1 to 1/2". Forged Alloy steel. Length: 7-3/4". Rust Protection - Increases tool life by reducing corrosion. Tether-Ready Handle Loops. MLT48223079 6 IN 1 Combination Pliers w/ Needle Nose, Stripper, Bolt Cutter & Reaming Head Milwaukee 48-22-6100 Lineman Pliers Hand Tools & Accessories MLT48226100 Milwaukee Lineman's Pliers 48-22-6100 9" high Leverage Lineman's Pliers w/ Crimper features Iron Carbide Edge cutting edges for up to 2X more cuts. Pliers' head has integrated reaming ridges for removing burrs from the inside of smooth pipe. Integrated crimper for INS and NON INS terminals. On-board fish tape puller. All molded comfort grips. Rust resistant. Jaw Length: 1.58". Knife Length:.78". Pipe Reamer: Up to 1-1/2". 9" High Leverage Linemans Pliers w/ Crimper Milwaukee 48-22-6101 Long Nose Pliers Milwaukee Long Nose Pliers 48-22-6101 The 8" Long Nose Pliers feature a 2" gripping nose for pulling wire and material through rough--in holes and other tight spaces. Pliers's head features integrated reaming ridges for removing burrs from the inside of smooth pipe. Integrated wrie cutter. On-board fish tape puller. Rust resistant. Jaw Length: 2.5", Jaw Capacity: 2.67". Knife Length:.5". Pipe Reamer: up to 1-1/2". MLT48226101 8" Long Nose Pliers w/ Gripping Nose Milwaukee 48-22-6330 Straight Jaw Pliers Set Milwaukee 2-Piece Pliers Set 48-22-6330 6" and 10" Ream & Punch Straight Jaw Pliers incorporate exposed metal handles and a precision ground pliers head for reaming pipe and punching electrical knock outs. Hardened teeth for long gripping length. Slim profile comfort grips. 6" pliers has.77" jaw length, 1" jaw capacity, up to 3/4" knife length and 5 adjustment positions. 10" pliers has 1.36" jaw length, 2" jaw capacity, up to 2" knive length and 7 adjustment positions. MLT48226330 6" & 10" Straight Jaw Grooved Pliers Set Does Not Contain Clearance Items 4
Hand Tools & Accessories Scissors Work Scissors Milwaukee 48-22-4040 Offset Scissors Milwaukee 48-22-4040 Jobsite Offset Scissors Iron carbide edge blades. Micro-serrated blades for grip while cutting. All metal core. Bolt lock technology. Rust protection. Large handle loops. Ruler markings on blade. Index finger groove. Scissor length: 9.5", blade length: 4.5". MLT48224040 Jobsite Offset Scissors Milwaukee 48-22-4041 Straight Scissors Milwaukee 48-22-4041 Jobsite Straight Scissors Iron carbide edge blades. Smooth blades for burr-free cuts. All metal core. Bolt lock technology. Rust protection. Large handle loops. Ruler markings on blade. Index finger groove. Scissor length: 9", blade length: 3.75". MLT48224041 Jobsite Straight Scissors Levels & Measuring Tools Measuring Tools Milwaukke Measuring Tapes & Wheels Hand Tools & Accessories Milwaukee Measuring Wheels The Milwaukee Measuring Wheel was designed for extreme durability, increased ergonomics, and productivity. Constructed of reinforced aluminum frames and reinforced folding joints, the Milwaukee measuring wheels are able to withstand the toughest jobsite conditions. Durable locking pivot points help quickly fold the units for transportation and storage. To prevent build-up of dirt and grime that could potentially jam the wheel, the Measuring Wheel has also been designed with a Debris-Cleaning Wheel Flap that easily clears away contamination while rolling. In addition, the measuring wheel also includes a reinforced kick stand. The pistol grip handles, designed to provide similar ergonomics to that of a power tool handle, fitting the hand of the user better than other wheels on the market. These handles feature a top brake function that can be used to lock the wheel and the reading, increasing accuracy. The Measuring Wheel is also designed with a top handle clearing function for easier use, allowing the user to reset for each measurement without bending over. MLT48225006 MLT48225012 MLT48227125 6" Measuring Wheel 12" Measuring Wheel 25' Magnetic Tape Measure Does Not Contain Clearance Items 5
Pipe & Tubing Tools Pipe Cutters Milwaukee Milwaukee 247121 Copper Tubing Cutter Milwaukee M12 Copper Tubing Cutter 12V Lithium-ion battery for longer run time. Automatic adjustment from 3/8" - 1" tubing. Water resistant metal head cutter, 1/2" to 1-1/8" O.D. capacity. Close quarter rotating cutting head cuts pipe in confined spaces. Performs over 200 cuts on a single charge. Battery Fuel Gauge displays remaining run-time. Includes (1) 12V Lithium-Ion Battery Pack, 30-minute Charger and Carrying Case. MLT247121 M12V Copper Tubing Cutter Kit w/1 Battery Milwaukee 48-38-0010 Replacement Cutter Wheels Milwaukee 48-38-0010 Copper Cutter Wheels 2-Pack 2 replacement cutter wheels for use with Milwaukee 12V Copper Tubing Cutter model 2471. Precision machined for fast, accurate cuts. Hardened steel with black oxide for long life. Convex blade design reduces chipping. Pipe & Tubing Tools MLT48380010 Replacement Cutter Wheels, 2 Pack, for Model 2471 Copper Tubing Cutter Power Tool Accessories Demolition Bits Demolition Bits - Milwaukee Milwaukee 3/4" Hex Clay Spade Milwaukee Clay Spade 48-62-3040 Clay spade with 3/4" hex shank. 4-1/2" W x 16-3/4" overall length. Made from forged high grade steel. For digging clay or hard packed gravel. DO NOT use for concrete. MLT48623040 4-1/2"W x 16-3/4"L - Clay Spade, 3/4" Hex Shank Milwaukee SDS-Max Bull Point Milwaukee SDS-Max Shank Bull Point Heavy duty demolition hammer bull point. SDS-Max Shank. Made from forged high grade steel. MLT48624075 12" Overall Length - Bull Point, SDS-Max Shank Does Not Contain Clearance Items 6
Power Tool Accessories Demolition Bits Demolition Bits - Milwaukee Milwaukee SDS-Max Chisels Milwaukee SDS-Max Shank Chisels Heavy duty demolition hammer chisels. SDS-Max Shank. Made from forged high grade steel. MLT48624079 MLT48624085 1"W x 12"L - Flat Chisel, SDS-Max Shank 2"W x 12"L - Scaling Chisel, SDS-Max Shank Milwaukee SDS-Max Ground Rod Driver Milwaukee Ground Rod Driver 48-62-4091 SDS-Max shank. 9-3/4" L x 5/8" x 3/4" Rod Dia. Made from forged high grade steel. Drives soft gound rods. Socket depth - 2-3/4", inner dia..906". MLT48624091 5/8" x 3/4" Rod dia, 9-3/4" L - Ground Rod Driver with SDS-Max Shank Milwaukee SDS-Plus Chisels Milwaukee SDS+ Shank Chisels Heavy duty demolition hammer chisels. SDS+ Shank. Made from forged high grade steel. MLT48626015 MLT48626020 3/4"W x 10"L, for General Chipping & Breaking - Flat Chisel, SDS+ Shank 1-1/2"W x 10"L, Cleans Concrete, Scale, Rust, Cuts Troughs & Some Asphalt - - Scaling Chisel, SDS+ Shank Milwaukee Spline 3/4" Hex X 21/32 Round Milwaukee Demolition Hammer Accessories Spline or Round Hex, 3/4" Hex with 21/32" Round Shank. Made from forged high grade steel. Power Tool Accessories MLT48622000 MLT48622020 MLT48622030 MLT48622040 MLT48622046 MLT48622050 3/4" Hex with 21/32" Round Shank, 12" Length - Bull Point 3/4" Hex with 21/32" Round Shank, 1"W x 12"L - Flat Chisel 3/4 inch Hex with 21/32 inch Round Shank, 1"W x 18"L - Flat Chisel 3/4" Hex with 21/32" Round Shank, 1-1/2"W x 12"L - Scaling Chisel 3/4" Hex with 21/32" Round Shank, 5/8" x 3/4" Rod dia. x 10"L - Ground Rod Driver 2"W x 12"L - Scaling Chisel, 3/4" Hex with 21/32" Round Shank Does Not Contain Clearance Items 7
Power Tool Accessories Drilling Bits & Accessories Assorted Drill Bit Kits - Milwaukee Milwaukee 48-32-4006 Shockwave 40pc Drill Drive Set MLT48324006 Milwaukee 40PC Impackt Drill & Drive Set Shockwave 48-32-4006 What's Included: (1) 1/2" Socket Adapter, (1) 1/4" Magnetic Nut Driver, (1) 1/4" SHOCKWAVE Hex Drive Bit, (1) 1/8" Drill Bit, (1) 3/16" SHOCKWAVE Hex Drive Bit,,(1) 3/8" Magnetic Nut Driver, (1) 3/8" Socket Adapter, (1) 5/16" Magnetic Nut Driver, (1) SHOCKWAVE Compact Magnetic Bit Holder, (1) Hex Bit 1" 1/4", (1) Hex Bit 1" 1/8", (1) Hex Bit 1" 3/16", (1) Hex Bit 1" 5/32", (1) Phillips Bit 1" P1, (2) Phillips Bit 1" P2, (1) Phillips Bit 1" P3, (4) Phillips Bit 2" P2, (1) Phillips Bit 2" P3, (1) Phillips Reduced 1" PR2 Bit, (1) Slotted 1" #10 Bit, (1) Slotted 1" #8 Bit, (1) Slotted 2" #10 Bit, (1) Square Bit 1" SQ1, (2) Square Bit 1" SQ2, (1) Square Bit 1" SQ3, (1) Square Bit 2" SQ2, (1) Square Bit 2" SQ3, (1) TORX Bit 1" T15, (1) TORX Bit 1" T20, (2) TORX Bit 1" T25, (1) TORX Bit 2" T20, (2) TORX Bit 2" T25 40-Pc - Shockwave Impact Drill & Drive Set Milwaukee 48-32-4403 Shockwave 18pc Bit Set MLT48324403 Milwaukee 48-32-4403 Shockwave 18-Pc Driver Bit Set. Geometric design provides the shock absorption. Proprietary steel and heat treat process for maximum strength and durability. Forged tips for maximum grip. Includes (1) Phillips Bit 1" P1, (1) Phillips Bit 1" P2, (1) Phillips Bit 1" P3, (1) Slotted Bit 1" SL 1/4", (1) Slotted Bit 1" SL 3/16", (1) Square Bit 1" SQ1, (1) Square Bit 1" SQ2, (2) Phillips Bit 2" P2, (1) Phillips Bit 2" P3, (2) Square Bit 2" SQ2, (1) Square Bit 2" SQ3, (1) TORX 2" T15, (1) TORX Bit 2" T20, (1) 3-1/2" Phillips #2, (1) 3-1/2" Square Drive #2, (1) Shockwave magnetic bit holder, (1) Case with bulk storage container. 18-Pc - Shockwave Driver Bit Set Milwaukee 48-89-4633 Shockwave Titanium 10pc Drill Bit Set Power Tool Accessories MLT48894633 Milwaukee Drill Bit Kit 48-89-4633 Milwaukee SHOCKWAVE Impact Duty Titanium Drill Bits with RED HELIX are engineered for impacts and drills. Designed with a Variable Helix with an aggressive 35 Helix Angle which ends at 15, the Impact Duty Titanium Drill bits with RED HELIX provide Rapid Chip Removal to limit heat buildup to Stay Sharper Longer. The 135 split point tip delivers a precision start and prevents walking for fast, accurate holes. Features: Titanium coating can be used in all drilling applications to give you up to 3x life vs. Black Oxide Drill Bits. Titanium coating for up to 3x life vs. black oxide. Shockwave impact duty, engineered for drills and impacts. Red helix design for rapid chip removal. Chip breaker decreased heat buildup. 135 split point for precision start no walking. Includes: two 1/8 in. shockwave titanium red helix drill bit (48-89- 4605), one 9/64 in. shockwave titanium red helix drill bit (48-89-4606), one 5/32 in. shockwave titanium red helix drill bit (48-89-4607), one 11/64 in. shockwave titanium red helix drill bit (48-89-4608), one 3/16 in. shockwave titanium red helix drill bit (48-89-4609), one 7/32 in. shockwave titanium red helix drill bit (48-89-4611), one 1/4 in. shockwave titanium red helix drill bit (48-89-4613), one 5/16 in. shockwave titanium red helix drill bit (48-89-4617), one 3/8 in. shockwave titanium red helix drill bit (48-89-4621) 10-Pc - Shockwave Titanium Red Helix Drill Bit Set Milwaukee 48-89-4680 Shockwave 18pc Drill Bit Set Milwaukee 48-89-4680 - Shockwave Impact Duty Titanium Drill Bit Set (18-Piece) The 18-Piece Milwaukee Thunderbolt Titanium coated Drill Bit Set offers convenience and heavy-duty performance on the jobsite. Milwaukee Thunderbolt Titanium coated drill bits are designed for extreme durability and up to 3X longer life. The Thunderbolt web features a thicker core than a standard drill bit to provide ultimate strength and protect against side-load breakage. The titanium coating reduces heat build-up and keeps the bit sharp to extend performance. A specially designed parabolic flute form clears chips and debris fast to keep the bit cool. The 135-degree split point tip delivers a precision start and prevents walking for fast, accurate holes. Effective for drilling on curved surfaces, Milwaukee Thunderbolt Titanium Coated bits require less effort to drill through wood, metal and PVC and are highly recommended for use with portable drills. Thunderbolt web provides longer life and faster driller times. Extended length for hard to reach areas. 135-degree split point, precision start, no walking. Specialty bit for cast iron and stainless steel. MLT48894680 18-Pc - Shockwave Impact Duty Titanium Driver Bit Set Does Not Contain Clearance Items 8
Power Tool Accessories Drilling Bits & Accessories Assorted Drill Bit Kits - Milwaukee Milwaukee 49-66-4419 Shockwave 8pc Socket Set Milwaukee Shockwave Socket Set - 49-66-4419 8-Piece Shockwave Impact Duty 3/8" Deep Well Socket Set. Made of proprietary steel and heat treated to control hardness. Features thin wall construction for access in tight spaces and 6 point deep wells for unyielding bit engagement. Ideal for heavy duty impact applications and for all the user's drilling and fastening needs. Impact Sockets included are: 11/16", 1/2", 3/4", 3/8", 5/16", 5/8", 7/16", & 9/16". MLT49664419 8-Pc - Shockwave Impact Duty 3/8" Deep Well Socket Set Milwaukee Thunderbolt Drill Bit Set - 48-89-2803 Milwaukee 48-89-2803 15-Piece Thunderbolt Black Oxide Drill Bit Set comes in a resilient case and includes bit sizes 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 1/4", 9/32", 5/16" and 3/8". 135 split point tip starts on contact to prevent walking, while the parabolic flute clears chips fast. Application: Metal/Wood/Plastic. The Thunderbolt web features a thicker core to provide greater strength and longer life. 3-Flat Secure-Grip shank holds the bit firmly in the drill chuck. Black oxide coating provides lubricity and resists corrosion of the bit. Highly recommended for use with portable drills. MLT48892803 15-Pc - Thunderbolt Black Oxide Drill Bit Set Auger Drill Bits Flat Boring Bit - Milwaukee MLT48270501 MLT48270621 MLT48270681 MLT48270751 MLT48270811 MLT48270871 MLT48271001 MLT48271121 MLT48271251 MLT48271371 MLT48271501 Flat Boring Bit Feature: Premium Quality - Heat Treated For Strength and Hardness. Precision Made of High Carbon Steel for durability and long life. Bore clean fast at an angle in wood, plastic, plywood and Formicia. Drill point and cutting edges can be resharpened often. Bit offers a 6 inch drilling depth but can be used with 12 inch extension, 48-28-3350, for extended deep hole drilling. 1/4" Quick change hex shank. 1/2" x 6-1/8" Overall Length - Flat Boring Bit 5/8" x 6-1/8" Overall Length - Flat Boring Bit 11/16" x 6-1/8" Overall Length - Flat Boring Bit 3/4" x 6-3/8" Overall Length - Flat Boring Bit 13/16" x 6-3/8" Overall Length - Flat Boring Bit 7/8" x 6-1/8" Overall Length - Flat Boring Bit 1" x 6-3/16" Overall Length - Flat Boring Bit 1" x 6-3/8" Overall Length - Flat Boring Bit 1-1/4" x 6-3/8" Overall Length - Flat Boring Bit 1-3/8" x 6-3/8" Overall Length - Flat Boring Bit 1-1/2" x 6-3/8" Overall Length - Flat Boring Bit Power Tool Accessories Does Not Contain Clearance Items 9
Power Tool Accessories Drilling Bits & Accessories Auger Drill Bits Flat Boring Bit Set 6-Pc - Milwaukee Milwaukee Flat Boring Bit Kit 49-22-0071 6-Piece, 6" universal flat boring bit set. Drill points and cutting edges can be resharpened for long life. Heat-treated carbon steel lets you bore clean holes quickly. Most popular sizes for boring small holes in wood, plastic, plywood and Formica. Can be used with a 12" extension for extended deep-hole drilling. 3/16" shank diameter. Kit Includes: 3/8", 1/2", 5/8", 3/4", 7/8" and 1" boring bits. MLT49220071 Ship Auger Bit - Milwaukee 6-Pc 6" Universal Flat Boring Bit Set Milwaukee Ship Auger Bit 48-13-6000 Durable, hardened, one-face 20 rake angle design enhances nail resistance, chip removal and fast easy sharpening. Selffeeding screw point. Nonstick, polished and coated flute for fast chip removal. Impact-rated shank. Flute length: 15". MLT48136000 Drill Bit Extensions 18" x 1" dia. Ship Auger Bit, 7/16" Hex Shank Milwaukee All Hex Bit Ext. 48-28-1020 Milwaukee 48-28-1020 All Hex Extension Innovative, tool-less, all-hex extension that accepts 1/4 insert bits, power-groove bits and double ended bits. Fast, easy accessory changes. Ideal for use with cordless drills. Power Tool Accessories MLT48281020 12" x 1/4" All Hex Extension Milwaukee Bit Extension - 48-28-40 Milwaukee Hex Extension Shanks One piece 7/16" for Hole Saws, Selfeed Bits and Auger Bits (1" dia. and Larger) with 7/16" Hex Shank. MLT48284001 MLT48284006 MLT48284011 5-1/2" - Hex Shank Bit Extension 12" - Hex Shank Bit Extension 18" - Hex Shank Bit Extension Does Not Contain Clearance Items 10
Power Tool Accessories Drilling Bits & Accessories Drill Bit Extensions Milwaukee Quik-Lok Bit Ext. 48-28-10 Milwaukee Universal Quik-Lok Extensions The 7/16" Universal Quik-Lok Extension has an innovate design that fits all 7/16" shanks, with or without a power-groove. The unique design requires no tools to change out bits, making it fast and efficient. These new extensions are impact rated for maximum durability. MLT48281030 MLT48281040 5-1/2" x 7/16" Universal Quik-Lok Extension 12" x 7/16" Universal Quik-Lok Extension Masonry Drilling Bits & Accessories Milwaukee 3-Flat Hammer-Drill Bits Milwaukee 3-Flat Hammer-Drill Bits 3-Flat Secure-Grip shank prevents bit from slipping in the chuck. Shank is designed to fit all 1/2" three jaw hammer-drill chucks. The bits drill faster and last longer than other hammer-drill bits on the market due to their reinforced flute geometry and carbide tip design. MLT48208800 1/8" Dia X 3" L - Drilling Depth 1-1/2", 2-Pack - 3-Flat Secure-Grip Hammer Drill Bit MLT48208801 5/32" Dia X 6" L - Drilling Depth 4", 2-Pack - 3-Flat Secure-Grip Hammer Drill Bit MLT48208805 3/16" Dia X 4" L - Drilling Depth 2", 2-Pack - 3-Flat Secure-Grip Hammer Drill Bit MLT48208806 3/16" Dia X 6" L - Drilling Depth 4", 2-Pack - 3-Flat Secure-Grip Hammer Drill Bit MLT48208810 1/4" Dia X 4" L - Drilling Depth 2" - 3-Flat Secure-Grip Hammer Drill Bit MLT48208811 1/4" Dia X 6" L - Drilling Depth 4" - 3-Flat Secure-Grip Hammer Drill Bit MLT48208812 1/4" Dia X 2" L - Drilling Depth 10" - 3-Flat Secure-Grip Hammer Drill Bit MLT48208816 5/16" Dia X 6" L - Drilling Depth 4" - 3-Flat Secure-Grip Hammer Drill Bit MLT48208817 5/16" Dia X 12" L - Drilling Depth 10" - 3-Flat Secure-Grip Hammer Drill Bit MLT48208821 3/8" Dia X 6" L - Drilling Depth 4" - 3-Flat Secure-Grip Hammer Drill Bit MLT48208822 3/8" Dia X 12" L - Drilling Depth 10" - 3-Flat Secure-Grip Hammer Drill Bit MLT48208825 7/16" Dia X 6" L - Drilling Depth 4" - 3-Flat Secure-Grip Hammer Drill Bit MLT48208830 1/2" Dia X 6" L - Drilling Depth 4" - 3-Flat Secure-Grip Hammer Drill Bit MLT48208831 1/2" Dia X 12" L - Drilling Depth 10" - 3-Flat Secure-Grip Hammer Drill Bit MLT48208840 5/8" Dia X 6" L - Drilling Depth 4" - 3-Flat Secure-Grip Hammer Drill Bit MLT48208841 5/8" Dia X 12" L - Drilling Depth 10" - 3-Flat Secure-Grip Hammer Drill Bit MLT48208845 3/4" Dia X 6" L - Drilling Depth 4" - 3-Flat Secure-Grip Hammer Drill Bit MLT48208846 3/4" Dia X 12" L - Drilling Depth 10" - 3-Flat Secure-Grip Hammer Drill Bit MLT48208854 1" Dia X 12" L - Drilling Depth 10" - 3-Flat Secure-Grip Hammer Drill Bit Milwaukee Core Bit SDS-MAX & SPLINE Thick Wall Carbide Tipped Power Tool Accessories Milwaukee Core Bit SDS-MAX & SPLINE Thick Wall Carbide Tipped Milwaukee's SDS-Max and Spline Thick Wall Core Bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin. Thick Wall Design. Usable Cuting Depth 4-1/16". Use with 12" or 18" SPLINE Adapter Shanks (48-03-3564, 48-03-3565 ) and 12" or 18" SDS-MAX Adapter Shanks (48-03-3572, 48-03-3573). Use With 7-1/2" Extension 48-95-6085. Use With Guide Plate 48-20-5176 and Centering Pin 48-20-5199. Includes Core Body with Guide Plate & Centering Pin. MLT48205125 MLT48205130 1-1/2" - SDS-MAX and SPLINE Thick Wall Carbide Tipped Core Bit 1-3/4" - SDS-MAX and SPLINE Thick Wall Carbide Tipped Core Bit Does Not Contain Clearance Items 11
Power Tool Accessories Drilling Bits & Accessories Masonry Drilling Bits & Accessories Milwaukee Core Bit SDS-MAX & SPLINE Thick Wall Carbide Tipped MLT48205135 MLT48205140 MLT48205145 MLT48205150 MLT48205155 MLT48205160 MLT48205165 Milwaukee Extensions 2" - SDS-MAX and SPLINE Thick Wall Carbide Tipped Core Bit 2-1/2" - SDS-MAX and SPLINE Thick Wall Carbide Tipped Core Bit 3" - SDS-MAX and SPLINE Thick Wall Carbide Tipped Core Bit 3-1/2" - SDS-MAX and SPLINE Thick Wall Carbide Tipped Core Bit 4" - SDS-MAX and SPLINE Thick Wall Carbide Tipped Core Bit 5" - SDS-MAX and SPLINE Thick Wall Carbide Tipped Core Bit 6" - SDS-MAX and SPLINE Thick Wall Carbide Tipped Core Bit Milwaukee Extensions Highly durable: Made of high-quality steel with tough core construction. Interchangeable drilling heads. Can be coupled for extra deep drilling applications MLT48956085 7-1/2" Core Bit Extension for Thick Wall Core Bits - Use with SDS Max or Spline Adapter Shanks in 12" & 18" lengths for Thick Wall core Bits Milwaukee SDS Plus Bit Set Milwaukee 48-20-7490 SDS Plus Bit Kit 5-Piece, heavy duty, 2-cutter, SDS shank, carbide bit kit. Chisel shaped head for fast drilling in hard materials. Set includes: (1) 1/2" x 6", (1) 1/4" x 6", (1) 3/16" x 4-1/2", (1) 3/8" x 6", and (1) 5/16" x 6" Rotary Hammer Drill Bits. Power Tool Accessories MLT48207490 2-Cutter, 5-Pieces - SDS+ Carbide Bit Set Milwaukee SDS Plus Drill Bits Milwaukee SDS Plus Rotary Hammer Bits Heavy duty 2-Cutter SDS+ carbide tips. Centering point ensures correct hole placement. Chisel shaped head for fast drilling in hard materials. High volume flute entrance quickly channels debris to the flute. Small diameters have a 4 fluted spiral for fast debris removal, minimal bending and breaking and less vibration. MLT48207061 MLT48207065 MLT48207066 MLT48207071 MLT48207075 MLT48207080 MLT48207085 MLT48207092 MLT48207096 MLT48207097 3/4" Dia X 8" L - Drilling Depth 6" - SDS+ Carbide Bit, 2-Cutter Head 3/4" Dia X 12" L - Drilling Depth 10" - SDS+ Carbide Bit, 2-Cutter Head 3/4" Dia X 18" L - Drilling Depth 16" - SDS+ Carbide Bit, 2-Cutter Head 7/8" Dia X 8" L - Drilling Depth 6" - SDS+ Carbide Bit, 2-Cutter Head 7/8" Dia X 18" L - Drilling Depth 16" - SDS+ Carbide Bit, 2-Cutter Head 1" Dia X 10" L - Drilling Depth 8" - SDS+ Carbide Bit, 2-Cutter Head 1" Dia X 18" L - Drilling Depth 16" - SDS+ Carbide Bit, 2-Cutter Head Fits Hex 5/16" Condrive Sleeve for Tap-Con Screw Sys., 3/16" Dia X 7" L - Drilling Depth 4" - SDS+ Carbide Bit, 2-Cutter Head w/hex Shoulder Fits Hex 5/16" Condrive Sleeve for Tap-Con Screw Sys., 5/32" Dia X 6" L - Drilling Depth 3" - SDS+ Carbide Bit, 2-Cutter Head w/hex Shoulder Fits Hex 5/16" Condrive Sleeve for Tap-Con Screw Sys., 3/16" Dia X 5" L - Drilling Depth 2" - SDS+ Carbide Bit, 2-Cutter Head w/hex Shoulder Does Not Contain Clearance Items 12
Power Tool Accessories Drilling Bits & Accessories Masonry Drilling Bits & Accessories Milwaukee SDS Plus Drill Bits MLT48207412 MLT48207413 MLT48207430 MLT48207431 MLT48207435 MLT48207441 MLT48207451 MLT48207453 MLT48207457 MLT48207459 MLT48207471 MLT48207473 MLT48207474 MLT48207477 MLT48207481 MLT48207602 MLT48207604 MLT48207607 3/16" Dia X 8" L - Drilling Depth 6" - SDS+ Carbide Bit, 2-Cutter 4 Fluted Spiral Head 3/16" Dia X 10" L - Drilling Depth 8" - SDS+ Carbide Bit, 2-Cutter 4 Fluted Spiral Head 1/4" Dia X 4-1/2" L - Drilling Depth 2" - SDS+ Carbide Bit, 2-Cutter 4 Fluted Spiral Head 1/4" Dia X 6" L - Drilling Depth 4" - SDS+ Carbide Bit, 2-Cutter 4 Fluted Spiral Head 1/4" Dia X 14" L - Drilling Depth 12" - SDS+ Carbide Bit, 2-Cutter 4 Fluted Spiral Head 5/16" Dia X 6" L - Drilling Depth 4" - SDS+ Carbide Bit, 2-Cutter 4 Fluted Spiral Head 3/8" Dia X 6" L - Drilling Depth 4" - SDS+ Carbide Bit, 2-Cutter 4 Fluted Spiral Head 3/8" Dia X 10" L - Drilling Depth 8" - SDS+ Carbide Bit, 2-Cutter 4 Fluted Spiral Head 3/8" Dia X 18" L - Drilling Depth 16" - SDS+ Carbide Bit, 2-Cutter 4 Fluted Spiral Head 3/8" Dia X 24" L - Drilling Depth "22 - SDS+ Carbide Bit, 2-Cutter 4 Fluted Spiral Head 1/2" Dia X 6" L - Drilling Depth "4 - SDS+ Carbide Bit, 2-Cutter 4 Fluted Spiral Head 1/2" Dia X 10" L - Drilling Depth "8 - SDS+ Carbide Bit, 2-Cutter 4 Fluted Spiral Head 1/2" Dia X 12" L - Drilling Depth "10 - SDS+ Carbide Bit, 2-Cutter 4 Fluted Spiral Head 1/2" Dia X 18" L - Drilling Depth "16 - SDS+ Carbide Bit, 2-Cutter 4 Fluted Spiral Head 9/16" Dia X 6" L - Drilling Depth "4 - SDS+ Carbide Bit, 2-Cutter 4 Fluted Spiral Head 5/8" Dia X 8" L - Drilling Depth "6 - SDS+ Carbide Bit, 2-Cutter 4 Fluted Spiral Head 5/8" Dia X 12" L - Drilling Depth "10 - SDS+ Carbide Bit, 2-Cutter 4 Fluted Spiral Head 5/8" Dia X 18" L - Drilling Depth "16 - SDS+ Carbide Bit, 2-Cutter 4 Fluted Spiral Head Milwaukee SDS-Max Adapters Milwaukee SDS-Max Adapter Extends reach: Drill in tight and hard-to-reach spaces. Versatile: Use with Milwaukee thick wall core bits MLT48033572 12" - SDS-Max Adapter Shank Milwaukee SDS-Max Drill Bits Milwaukee SDS-Max Carbide Bits Features the SDS Max drive system for fast bit changes and efficient power transfer from the hammer to the bit. Bits under 9/16" feature the highest quality carbide and provide two cutting edges. Bits over 9/16" (5/8") feature the highest quality carbide and provide two extra carbide nibs resulting in four cutting edges. These four cutting edges increase the drilling speed by pulverizing more concrete. They also provide a rounder hole than two cutter bits. The flutes provide a fast deep means of clearing concrete sut from deep holes speeding up drill rates. Use only in SDS Max drive Hammers. Power Tool Accessories MLT48203902 MLT48203904 MLT48203932 MLT48203946 MLT48203954 MLT48203972 MLT48203988 MLT48203992 MLT48203993 1/2" Dia X 13" L - Drilling Depth 8" - SDS-Max Carbide Masonry Bit, 2-Cutter Head 1/2" Dia X 21" L - Drilling Depth 16" - SDS-Max Carbide Masonry Bit, 2-Cutter Head 3/4" Dia X 21" L - Drilling Depth 16" - SDS-Max Carbide Masonry Bit, 4-Cutter Head 7/8" Dia X 21" L - Drilling Depth 16" - SDS-Max Carbide Masonry Bit, 4-Cutter Head 1" Dia X 21" L - Drilling Depth 16" - SDS-Max Carbide Masonry Bit, 4-Cutter Head 1-1/4" Dia X 23" L - Drilling Depth 18" - SDS-Max Carbide Masonry Bit, 4-Cutter Head 1-1/2" Dia X 23" L - Drilling Depth 18" - SDS-Max Carbide Masonry Bit, 4-Cutter Head 1-3/4" Dia X 23" L - Drilling Depth 18" - SDS-Max Carbide Masonry Bit, 4-Cutter Head 2" Dia X 23" L - Drilling Depth 18" - SDS-Max Carbide Masonry Bit, 4-Cutter Head Does Not Contain Clearance Items 13
Power Tool Accessories Drilling Bits & Accessories Masonry Drilling Bits & Accessories Milwaukee SDS-Plus to Chuck Adpapter Milwaukee SDS+ to Chuck Adapter Kit 48-66-1370 SDS+ to 3-Jaw Chuck Adapter Kit. Includes Chuck Adapter, 1/2" Chuck and Chuck Screw. Tool Shank: SDS+. Bit Shank: Hammer Drill (straight). MLT48661370 Milwaukee Spline Adapters SDS-Plus to 3-Jaw Chuck Adapter Kit MIlwaukee Spline Adapters Extends Reach: Drill in tight and hard-to-reach spaces. Versatile: Use with Milwaukee thick wall core bits. Interchangeable drilling heads MLT48033564 12" - Spline Adapter Shank Milwaukee Spline Bits Power Tool Accessories MLT48204037 MLT48204051 MLT48204052 MLT48204056 MLT48204063 MLT48204076 MLT48204078 MLT48204100 MLT48204101 MLT48204113 MLT48204125 MLT48204126 MLT48204151 MLT48204305 MLT48204335 MLT48204395 MLT48204400 MLT48204415 Milwaukee Spline Shank Carbide Bits For use in Spline Drive rotary hammers. These bits are for use in any kind of concrete. Spline bits have an equal but opposite set of spline in the drive system of the driver hammer. This positive engagement of spline to spline allows maximum transmission of energy from the hammer to the bit. Two cutter spline bits have a series of 12 spline that slide into an equal but opposite set of spline. The carbide nibs are vacuum brazed to a heat treated steel body resulting in two cutting edges which pulverize the concrete as it turns and pounds the work surface. Four cutter spline bits have a series of 13 spline that slide into an equal but opposite set of spline. These four cutting edges increase the drilling speed by pulverizing more concrete as the bit turns and pounds the work surface. They also provide a rounder hole than two cutter bits. 3/8" Dia X 10" L - Drilling Depth 4" - Carbide Spline Bit, 2-Cutter Head 1/2" Dia X 16" L - Drilling Depth 10" - Carbide Spline Bit, 2-Cutter Head 1/2" Dia X 22" L - Drilling Depth 16" - Carbide Spline Bit, 2-Cutter Head 9/16" Dia X 10" L - Drilling Depth 4" - Carbide Spline Bit, 2-Cutter Head 5/8" Dia X 16" L - Drilling Depth 10" - Carbide Spline Bit, 2-Cutter Head 3/4" Dia X 16" L - Drilling Depth 10" - Carbide Spline Bit, 2-Cutter Head 3/4" Dia X 22" L - Drilling Depth 16" - Carbide Spline Bit, 2-Cutter Head 1" Dia X 16" L - Drilling Depth 10" - Carbide Spline Bit, 2-Cutter Head 1" Dia X 22" L - Drilling Depth 16" - Carbide Spline Bit, 2-Cutter Head 1-1/8" Dia X 22" L - Drilling Depth 16" - Carbide Spline Bit, 2-Cutter Head 1-1/4" Dia X 16" L - Drilling Depth 10" - Carbide Spline Bit, 2-Cutter Head 1-1/4" Dia X 22" L - Drilling Depth 16" - Carbide Spline Bit, 2-Cutter Head 1-1/2" Dia X 22" L - Drilling Depth 16" - Carbide Spline Bit, 2-Cutter Head 5/8" Dia X 16" L - Drilling Depth 11" - Carbide Spline Bit, 4-Cutter Head 3/4" Dia X 16" L - Drilling Depth 11" - Carbide Spline Bit, 4-Cutter Head 1-1/4" Dia X 16" L - Drilling Depth 11" - Carbide Spline Bit, 4-Cutter Head 1-1/4" Dia X 22" L - Drilling Depth 17" - Carbide Spline Bit, 4-Cutter Head 1-1/2" Dia X 22" L - Drilling Depth 17" - Carbide Spline Bit, 4-Cutter Head Does Not Contain Clearance Items 14
Power Tool Accessories Drilling Bits & Accessories Masonry Drilling Bits & Accessories Milwaukee Tapcon Install. Kit Milwaukee 48-20-7497 SDS Plus Tapcon Installation Kit 7-Piece set with carrying pouch. Drill and drive with single tool. Works with 3/16" and 1/4" concrete screws. Works with hex washer head and flat head screws. Includes: (1) 1/4" Hex Drive Bit, (1) 3/16" x 7" with 1/4" Hex Rotary Hammer Drill Bit, (1) 5/16" Hex Drive Bit, (1) 5/32" x 7" with 1/4" Hex Rotary Hammer Drill Bit, (1) Drive Sleeve, (1) Number 2 Phillips Driver Bit, (1) Number 3 Phillips Driver Bit. MLT48207497 Self-Feed Bits & Kits SDS-Plus Tapcon Installation Kit, Drill or Drive 3/16" and 1/4" Screws Milwaukee Contractor Bit Kit - 49-22-0130 MIlwaukee 49-22-0130 Contractors Bit Kit Assortment of most commonly used selfeed bits for big hole drilling. Bit diameters: 1 in., 1-1/8 in., 1-1/4 in., 1-1/2 in., 1-3/4 in., 2-1/8 in., 2-9/16 in. MLT49220130 Self Feed Contractor Bit Kit Milwaukee Self-Feed Bits MLT48251002 MLT48251122 MLT48251252 MLT48251372 MLT48251502 MLT48251752 MLT48252002 MLT48252122 MLT48252252 MLT48252562 MLT48253001 MLT48253621 MLT48254125 MLT48254621 Milwaukee Self Feed Bits The inside cutting plane shaves the hole radius for clean smooth holes without pressure. A removable, replaceable feed screw draws the bit into the gummiest of woods effortlessly. A hex shank provides a secure gripping surface for the drill chuck. The bit is coated with a rust inhibitor. Use Feed Screw 48-28-6870, on diameters less than 3". 1" - Selfeed Bit 1-1/8" - Selfeed Bit 1-1/4" - Selfeed Bit 1-3/8" - Selfeed Bit 1-1/2" - Selfeed Bit 1-3/4" - Selfeed Bit 2" - Selfeed Bit 2-1/8" - Selfeed Bit 2-1/4" - Selfeed Bit 2-9/16" - Selfeed Bit 3" - Selfeed Bit 3-5/8" - Selfeed Bit 4-1/8" - Selfeed Bit 4-5/8" - Selfeed Bit Power Tool Accessories Does Not Contain Clearance Items 15
Power Tool Accessories Drilling Bits & Accessories Self-Feed Bits & Kits Milwaukee Single Ended Feed Screw Milwaukee 48-28-6880 Single ended replacement Feed Screw for selfeed bits 3" in diameter and larger. For faster, more accurate drilling. Aggressive feed screw design allows the bit to pull through fast. Bit Diameter Compatibility: 3 to 4-5/8. Thread: 3/8" Regular. MLT48286880 Replacement Feed Screw, Single Ended for Self-Feed Bits 3" or Larger Milwaukee Switchblade 5-Pc Bit Kit SwitchBlade Plumber's Selfeed 5-Piece Bit Kit Bits are designed for drilling holes in all types of wood. SwitchBlade bits allow you to remove and replace blades rather than resharpen. Replaceable blades are made of hardened steel. Bit and blades are engraved for quick and easy size identification. 5-Piece bit set includes 1-1/2", 1-3/8", 2-1/8", 2-9/16" Bits, (1) 5-1/2" Quick-Lok Extension, (4) replacement blades, 1 each size, (4) feed screws, (4) set screws, (1) hex key and impact resistant carrying case. MLT49225100 SwitchBlade Plumbers Selfeed Bit Kit, 5-pc Milwaukee Switchblade Self-Feed Bits SwitchBlade Self-Feed Bits Designed for drilling holes in all types of wood for pipe, vents, gas lines, and bulk wire routing. SwitchBlade bits allow you to remove and replace blades rather than resharpen. Aggressive feed screw design allows the bit to pull through wood faster. Replaceable blades are made of hardened steel. Bit and blades are engraved for quick and easy size identification. Power Tool Accessories MLT48255120 1-3/8" SwitchBlade Selfeed Bit MLT48255125 1-1/2" SwitchBlade Selfeed Bit MLT48255140 2-1/8" SwitchBlade Selfeed Bit MLT48255150 2-9/16" SwitchBlade Selfeed Bit MLT48255275 Switchblade Replacement Feed Screw Kit w/ 5 Feed Screws, 3 Set Screws & Hex Key MLT48255420 1-3/8" Replacement Blade for MLT48255120 Switchblade Selfeed Bit MLT48255425 1-1/2" Replacement Blade for MLT48255125 Switchblade Selfeed Bit MLT48255440 2-1/8" Replacement Blade for MLT48255140 Switchblade Selfeed Bit MLT48255450 2-9/16" Replacement Blade for MLT48255150 Switchblade Selfeed Bit Step-Drill Bits Milwaukee Step Drill Bit Set 3-PC Milwaukee 48-89-9221 3-Pc Step Drill Bit Set Dual-flute design provides jam-free performance with greater speed and control. Optimized for cordless drills in high speed. Rapid Strike tip creates fast, accurate starts and generates less heat. Black oxide coating. Up to 4X longer bit life. Up to 50% more holes per battery charge. Lazer-engraved reference marks. 3-Flat Secure-Grip shanks. Includes #1 (1/8"- 1/2" by 1/32"), #2 (3/16"-1/2" by 1/16"), and #4 (3/16"-7/8" by 1/16") Step Drill Bits. MLT48899221 3-Piece Step Drill Bit Set, #1, #2 & #4 Does Not Contain Clearance Items 16
Power Tool Accessories Fastening Bits & Accessories Fastening Bits & Accessories - Milwaukee Fastening Bits & Accessories - Milwaukee MLT48062860 33-Degree Angle Drive Kit MLT48320221 21 Piece Screwdriver Kit - 1" MLT48321500 MLT48321700 MLT48322100 38 Piece Quik-Lok Accessory Kit 20 Piece Insert Bit Set Offset Drive Adapter Hole Cutting Bits & Accessories Hole Saw Arbors - Mandrels - Pilot Bits Arbor/Pilot Drill Bits Arbor/Pilot Drill Bits MLT48271401 Big Hawg Arbor Pilot Bit MLT49568000 1/4" x 4" - Hole Saw Arbor Pilot Bit MLT49569105 Big Hawg Hole Cutter Arbor Hole Saw Bits, Hole Cutters & Accessories Diamond Files Diamond Files Power Tool Accessories MLT48095055 Big Hawg Diamond File Milwaukee - Hole Saw Cutters Milwaukee - Hole Saw Cutters MLT49561123 1-1/8" Carbide Tipped Hole Saw Does Not Contain Clearance Items 17
Power Tool Accessories Hole Cutting Bits & Accessories Hole Saw Bits, Hole Cutters & Accessories Milwaukee - Hole Saw Cutters MLT49565625 MLT49565645 MLT49569000 MLT49569010 MLT49569020 MLT49569030 MLT49569045 MLT49569050 Hole Saw Kits 1-3/8" - Diamond Plus Hole Cutter 2" - Diamond Plus Hole Cutter 2-1/8" - Big Hawg Hole Cutter 2-9/16" - Big Hawg Hole Cutter 3" - Big Hawg Hole Cutter 3-5/8" - Big Hawg Hole Cutter 4-1/4" - Big Hawg Hole Cutter 4-5/8" - Big Hawg Hole Cutter Milwaukee Big Hawg - Hole Cutter Kit - 49-56-9075 MLT49569075 Milwaukee 7-Piece Big Hawg Kit - 49-56-9075 Big Hawg hole cutters are specifically designed for drilling large holes in rough wood applications with the speed and longevity that HVAC, plumbing, and other professional contractors require. Features aggressive tooth geometry for up to ten times faster cutting than hole saws. Deep gullets for easy plug removal. Three hardened steel teeth provide maximum durbility against unintended nail impacts. Cuts up to 600 holes in wood without needing to be resharpened. Storage space for additional hole cutters. Comes with: Three (3) hole cutters: 2-1/8", 2-9/16", 3-5/8". One (1) arbor with pilot bit. Two (2) pilot bits. One (1) diamond file. One (1) hex wrench and impact resistant case. 7 Piece Big Hawg Hole Cutter Kit Milwaukee Big Hawg - Hole Cutter Kit - 49-56-9085 Power Tool Accessories MLT49569085 Milwaukee 10-Piece Big Hawg Kit - 49-56-9085 Big Hawg hole cutters are specifically designed for drilling large holes in rough wood applications with the speed and longevity that HVAC, plumbing, and other professional contractors require. Features aggressive tooth geometry for up to ten times faster cutting than hole saws. Deep gullets for easy plug removal. Three hardened steel teeth provide maximum durbility against unintended nail impacts. Cuts up to 600 holes in wood without needing to be resharpened. Storage space for additional hole cutters. Comes with: Six (6) hole cutters: 2-1/8", 2-1/4", 2-9/16", 3", 3-5/8", 4-1/4". One (1) arbor with pilot bit. Two (2) pilot bits. One (1) diamond file. One (1) hex wrench and impact resistant case 10 Piece Big Hawg Hole Cutter Kit Milwaukee Electrician Kit 49-22-4095 Milwaukee 49-22-4095 10-Pc Electricians Hole Saw Kit Ice Hardened cryogenically treated for up to 50% longer life. Optimized tooth form for up to 2X faster cutting. Wide, angled and offset slots for easy plug access. Bi-metal construction with 8% cobalt for increased wear resistance. Includes (1- Each) 7/8", 1-1/8", 1-3/4", 1-3/8", 2", 2-1/2" hole saws, (1) hole saw arbor adpater, (1) 7/16" small thread arbor, (2) 1/4" x 3-1/2" high speed steel pilot bit, (1) 7/16" large thread quick change arbor, (1) hole saw arbor spacer and carrying case. MLT49224095 10-Piece Electricians Ice Hardened Hole Saw Kit Does Not Contain Clearance Items 18
Power Tool Accessories Hole Cutting Bits & Accessories Hole Saw Kits Milwaukee Electricians Carbide Cutter Kit 49-22-8300T Milwaukee 49-22-8300 5-Pc Electrician's Sheet Metal Carbide Cutter Kit. For materials up to 3/16" these carbide tipped sheet metal cutters produce fine, burr-free holes in a variety of materials. Ideal for stainless steel, structural steel studs, electrical boxes, cast iron, brass, aluminum and other thin non-ferrous metals. Designed to be used in hand held drills to achieve drill press quality holes. Quick change carbide tips for longer life. Lubrication during drilling extends the life of the carbide cutter. Includes (1-Each) 1-1/8", 1-3/8", 7/8" carbide cutters, (1) pilot bit, (1) quick change arbor with pilot bit and case. MLT49228300 5-Piece Electricians Sheet Metal Carbide Cutter Kit Milwaukee Electricians Kit 49-22-4088 Milwaukee 49-22-4088 Electricians Hole Saw Kit 7-Piece compact electricians Hole Dozer hole saw kit. Strong bi-metal construction with 8% cobalt for increased wear resistance. All access for faster plug removal. Rip Guard limited lifetime tooth break warranty. Bit Sizes: 7/8", (2) 1-1/8", 1-3/8". Bit Diameter: 1/4". Kit Includes Saws - 7/8", (2) 1-1/8", 1-3/8", Arbor, Arbor Spacer, Arbor Adapter, Pilot Bit, Hex Key and Case. MLT49224088 7-Piece Compact Electricians Hole Saw Kit Milwaukee General Purpose Kit 49-22-4025 Milwaukee 49-22-4025 Bi-Metal Hole Saw Kit 13-pc Ice Hardened bi-metal hole saw kit features cryogenically treated pieces to ensure strength and durability. Requires minimum chuck size of 3/8". For multi-purpose cutting. Wide, angled and offset slots for easy plug access. Includes (2) pilot bits, (2) arbors, and (9) hole saws: 3/4", 7/8", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/8" and 2-1/2". MLT49224025 13-Piece Ice Hardened Bi-Metal Hole Saw Kit Milwaukee Plumbers Kit 49-22-4142 Milwaukee 49-22-4142 Plumbers Hole Saw Kit 12-Piece large diameter plumbers Hole Dozer hole saw kit. Strong bi-metal construction with 8% cobalt for increased wear resistance. All access Plug Jack slot for faster plug removal. Rep Guard limited lifetime tooth break warranty. Bit Diameter: 3/8". Kit Includes Hole Saws - 1-1/2", 2-1/4", 2-9/16", 3", 3-1/2", 4", 4-1/4", 4-1/2", Arbor, (3) Pilot Bits, Hex Key, and Case. Power Tool Accessories MLT49224142 12-Piece Large Diameter Plumbers Hole Saw Kit Milwaukee Thin Wall Hole Saw Kit 49-22-4800 Milwaukee 49-22-4800 Thin Wall Hole Saw 3-Pc Kit Sizes 7/8", 1-1/8" and 1-3/8". 1/4" Quick change hex shank for use with impact drivers. Thin wall 8 TPI design for 40% faster cuts than standard bi-metal hole saws. Stop shoulder design prevents over drilling and damaging components. Ejection spring automatically removes slugs. For use in plastics and thin gauge metals up to 1/8" thick. MLT49224800 7/8", 1-1/8" & 1-3/8" - 3-Piece Thin Wall Hole Saw Kit Does Not Contain Clearance Items 19
Power Tool Accessories Saw Blades Circular Cutting Blades Milwaukee - Circular Cutting Blades Milwaukee - Circular Cutting Blades MLT48404105 5-3/8" - 16 TPI Carbide Teeth, Framing Circular Saw Blade MLT48404108 6-1/2" - 24TPI Carbide Teeth 5/8" in Arbor Circular Saw Blade for Framing & Ripping MLT48404112 6-1/2" - 40TPI Carbide Teeth 5/8" in Arbor Circular Saw Blade for Trimming & Finishing MLT48404515 8" - 42 TPI Cermet Tipped High Carbon Steel - Longer Life, Circular Saw Blade General Metal Cutting, 5/8" Arbor Size Circular Cutting Blades & Discs Milwaukee - Circular Cutting Blades Milwaukee - Circular Cutting Blades MLT49937805 4-1/2" - Steel Head Diamond Cut Off Blade, 5/8", 7/8" Arbor Size Jig Saw Blades Power Tool Accessories Jig Saws - Milwaukee MLT48420120 MLT48420140 MLT48420220 MLT48420240 MLT48420540 MLT48425300 Milwaukee Jig Saw Blades - Metal Cutting High Speed Steel 2-3/4" Length, 9/32" Wide. Designed and manufactured for the professional user. Detail to the material used, tooth shape and sharpness make these blades cut clean and fast. This blade has a universal tang and fits Milwaukee Jig Saw model 6256-6 and other popular brands. Includes 5 individual blades. 18 TPI, 2-3/4" Length, 9/32 Wide - Jig Saw Blade High Carbon Steel 24 TPI, 2-3/4" Length, 9/32 Wide - Jig Saw Blade High Carbon Steel 8 TPI, 4" Length, 9/32 Wide - Jig Saw Blade High Carbon Steel 8 TPI, 3-1/8". Length, 7/32 Wide - Jig Saw Blade High Carbon Steel 10 TPI, 3-5/8" Length, 9/32 Wide - Jig Saw Blade High Carbon Steel 6 TPI, 4" Length, 9/32" Width - Jig Saw Blade, Bi-Metal, T-Shank Does Not Contain Clearance Items 20
Power Tool Accessories Saw Blades Reciprocating Blades Milwaukee - Recip Blades Milwaukee - Recip Blades MLT48001420 6" (3-pk) Carbide Grit Recip Blade, Tungsten Carbide, Coarse Grit - 6 x 3/4 x.032 MLT48001430 9" (3-pk) Carbide Grit Recip Blade, Tungsten Carbide, Coarse Grit - 9 x 3/4 x.039 MLT48004091 8/12 TPI, 6", 5 Pack - Ice Hardened Sawzall Blade MLT48004093 8/12 TPI, 8", 5 Pack - Ice Hardened Sawzall Blade MLT48004182 14 TPI, 6", 5 Pack - Ice Hardened Sawzall Blade MLT48004184 18 TPI, 6", 5 Pack - Ice Hardened Sawzall Blade MLT48004186 24 TPI, 6", 5 Pack - Ice Hardened Sawzall Blade MLT48004187 14 TPI, 9", 5 Pack - Ice Hardened Sawzall Blade MLT48004188 18 TPI, 9", 5 Pack - Ice Hardened Sawzall Blade MLT48004712 10 TPI, 6", 5 Pack - Ice Hardened Sawzall Torch Blade MLT48004713 10 TPI, 9", 5 Pack - Ice Hardened Sawzall Torch Blade MLT48004782 14 TPI, 6", 5 Pack - Ice Hardened Sawzall Torch Blade MLT48004784 18 TPI, 6", 5 Pack - Ice Hardened Sawzall Torch Blade MLT48004787 14 TPI, 9", 5 Pack - Ice Hardened Sawzall Torch Blade MLT48004788 18 TPI, 9", 5 Pack - Ice Hardened Sawzall Torch Blade MLT48005015 6" - 6-TPI (5-pk) Bi-Metal Fleam Ground Recip Blade, 6 x 3/4 x.050, for cuts in clean wood MLT48005016 9" - 6-TPI (5-pk) Bi-Metal Fleam Ground Recip Blade, 9 x 3/4 x.050, for cuts in clean wood MLT48005021 6-in. 5/8-TPI (5-pk) The Ax Super Sawzall Bi-Metal Blade, 6 x 1.0 x.062 MLT48005026 9-in. 5/8-TPI (5-pk) The Ax Super Sawzall Bi-Metal Blade, 9 x 1.0 x.062 MLT48005027 12-in. 5/8-TPI (5-pk) The Ax Super Sawzall Bi-Metal Blade, 12 x 1.0 x.062 MLT48005041 6" - 4/6-TPI (5-pk) Bi-Metal Recip Blade, for Nail Embedded Wood MLT48005712 6" - 10-TPI (5-pk) The Torch Recip Blade, 6 x 1.0 x.042, for sch80 Pipe/Threaded Rod MLT48005713 9" - 10-TPI (5-pk) The Torch Recip Blade, 9 x 1.0 x.042, for sch80 Pipe/Threaded Rod MLT48005782 6" - 14-TPI (5-pk) The Torch Recip Blade, 6 x 1.0 x.042, for Sch80 Pipe/Angle Iron MLT48005784 6" - 18-TPI (5-pk) The Torch Recip Blade, 6 x 1.0 x.042, for Rigid Conduit/Strut MLT48005787 9" - 14-TPI (5-pk) The Torch Recip Blade, 9 x 1.0 x.042, for Sch80 Pipe/Angle Iron MLT48005788 9" - 18-TPI (5-pk) The Torch Recip Blade, 9 x 1.0 x.042, for Rigid Conduit/Strut MLT48005789 12" - 18-TPI (5-pk) The Torch Recip Blade, 12 x 1.0 x.042, for Rigid Conduit/Strut MLT49005324 3-1/2" (5-pk) M12 Hackzaw Blades, Metal Scroll Cuts in Metal Under 1/8" MLT49005414 4" (5-pk) M12 Hackzaw Blades, PVC/Plastic Cuts Schedule 40 PVC Pipe Up to 2" Dia. MLT49005614 6" (5-pk) M12 Hackzaw Blades, PVC/Plastic Cuts Schedule 40 PVC Pipe Up to 4" Dia. MLT49221129 12-Piece Demolition Sawzall Bi-Metal Blade Kit MLT49221131 14 Piece Ice Hardened Sawzall Blade Kit MLT49221132 32-Piece Mega Sawzall Blade Kit MLT49225403 3-Piece Material Removal Blade Set for Hackzalls and Sawzalls Power Tool Accessories Does Not Contain Clearance Items 21
Power Tool Accessories Saw Blades Bandsaw Blades Milwaukee Bi-Metal Super-Tough Bandsaw Blades Outlast conventional blades up to 3 times, requiring fewer blade changes. An extremely hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed. Includes one blade. MLT48390510 MLT48390518 MLT48390520 MLT48390528 MLT48390530 MLT48390538 MLT48390572 Wire Brushes Bi-Metal Band Saw Blade 1PK, 14 TPI, Blade Dimensions: 44-7/8" X 1/2" X.020", Standard/Deep Cut, for Cutting Stock 3/16" to 5/16" Thick Compact Band Saw Blade 1PK, 14 TPI, Blade Dimensions: 35-3/8" X 1/2" X.020", Cuts Common Material: 3/16" - 5/16" Thick, Hard: 5/16" - 1/2" Thick Bi-Metal Band Saw Blade 1PK, 18 TPI, Blade Dimensions: 44-7/8" X 1/2" X.020", Standard/Deep Cut, for Cutting Stock 5/32" to 3/16" Thick Compact Band Saw Blade 1PK, 18 TPI, Blade Dimensions: 35-3/8" X 1/2" X.020", Cuts Common Material: 5/32" - 3/16" Thick, Hard: 3/16" - 5/16" Thick Bi-Metal Band Saw Blade 1PK, 24 TPI, Blade Dimensions: 44-7/8" X 1/2" X.020", Standard/Deep Cut, for Cutting Stock up to 5/32" Thick Compact Band Saw Blade 1PK, 24 TPI, Blade Dimensions: 35-3/8" X 1/2" X.020", Cuts Common Material: Up to 5/32" T hick, Hard: 5/32" - 3/16" Thick Sub-Compact Band Saw Blade 3PK, 18 TPI, Blade Dimensions: 27" X 1/2" X.020", Cuts Common Materials 5/32" - 3/16" Thick, Hard: 3/16" - 5/16" Thick Knot Cup Brushes - Milwaukee 48-52-5040 Power Tool Accessories MLT48525040 Milwaukee Knot Cup Brushes MLT48-52-5040 - Features: - 2-3/4 inch - 5/8-11 thread -.020 ga wire -Carbon steel. Designed to be used on 4-1/2 inch or 5 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. MLT48-52-1125 - Features: -2-3/4 inch -1/2-13 thread -.020 ga wire - Carbon steel. Designed to be used on 4-1/2 inch or 5 inch Milwaukee Grinders (6145 and 6146) with 1/2-13 threaded spindles. Milwaukee offers the finest quality Knot Wire Cup Brushes to give you long service on the toughest cleaning jobs. These cup brushes are ideally suited for cleaning castings, structural steel and sheet metal. This Knot Wire Cup Brush is designed to be used on 9 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. Made of carbon steel. Knot Cup Brush 2-3/4"., 5/8-11 thread Knot Wheel Full Cable Twist - Milwaukee 48-52-5030 Milwaukee 48-52-5030 Twist Knot Wheel 4" carbon steel cable twist knot wheel with 0.020" / 0.023" gauge wire. Designed for heavy duty work. For use with Milwaukee 4-1/2" or 5" Grinders with 5/8-11 threaded spindles. Made in USA. MLT48525030 4" Full Cable Twist Knot Wheel, 5/8-11 Threaded Spindles Does Not Contain Clearance Items 22
Milwaukee - CORDED Power Tools Drills - Hole Hawg Milwaukee Corded Milwaukee 1675-6 1/2" Hole Hawg Drill Milwaukee 1/2" Hole Hawg Drill - 300/1200 RPM Handles up to 4-5/8" selfeed bit. Two speed: 300 and 1200 rpm, reversing. Powerful 7.5 amp motor. Powerful, yet compact for large hole drilling between joists and studs. MLT16756 1/2" Hole-Hawg Drill 300/1200 RPM Milwaukee 1676-6 1/2" Hole Hawg Drill Milwaukee 1/2" Hole Hawg Drill - 300/1200 RPM w/ Case Handles up to 4-5/8 in.selfeed bit. Two speed: 300 and 1200 rpm, reversing. Powerful 7.5 amp motor. Powerful, yet compact for large hole drilling between joists and studs. MLT16766 1/2" Hole-Hawg Drill 300/1200 RPM KIT Milwaukee 1680-21 1/2" Super Hawg Drill Milwaukee 1/2" Super Hawg with Carrying Case, 450/1750 RPM Clutch in low speed. High operating speeds for maximum productivity, 90 left-right, Roto-Lok handle for maximum operating comfort. Easy turn gear shift knob. Comfort grip switch handle and gear case with front T-bar handle. MLT168021 1/2" Super Hawg with Carrying Case Grinders - Milwaukee Corded Milwaukee - 4-1/2" Small Angle Grinder - 6142-31 MLT614231 Milwaukee 6142-31 4-1/2 in. Small Angle Grinder No-Lock Powerful grinder provides 12,000 RPM motor for fast material removal. Same metal housing and gearing system as legendary high-performance corded grinders. Overload Protection and electronic clutch (Available on 6142-30/31 models only). Electronic clutch extends life of tool and prevents bind-up. Soft Start minimizes internal tool damage at start-up. Line lock-out prevents start-up after power loss (Available on 6142-30/31 models only). Optimized air intake system provides superior cooling. Tool-free adjustable guard for quick guard installations and adjustments. Slimmest grip on the market for increased user comfort and control. Long paddle provides multiple hand positions. Enlarged bevel gear for longer gear life. Includes: 4-1/2 in. Small Angle Grinder No-Lock - 6142-31. 4-1/2" - Small Angle Grinder,11 Amp. Does Not Contain Clearance Items 23
Milwaukee - Corded Power Tools Grinders - Milwaukee Corded Milwaukee - 5" Small Angle Grinder - 6117-31 Milwaukee Small Angle grinder - 6117-31 13 Amp 5" Small Angle Grinder, paddle switch, no-lock. Powerful 13 Amp, 11,000 RPM motor provides maximum performance and durability. Overload protection that maximizes motor life. Tool-Free accessory change and adjustable guard. Electronic clutch extends tool life and prevents bind-up. Advanced airflow system maximizes airflow and reduces debris ingress. 5" wheel diameter. Volts: 120 AC only. 2-Wire cord, 8' length. Tool Length: 12.2". Tool Weight: 5.7 lbs. Includes: Grinder, Type 27 guard, anti-vibration side handle, spanner wrench and flanges. MLT611731 5" - Small Angle Grinder,13 Amp. Milwaukee - 6" Small Angle Grinder - 6130-33 Milwaukee 6161-30 6" 13 Amp Small Angle Grinder with Paddle Lock-On Are you looking for a high quality grinder? Than look no further than Milwaukee Tools! Milwaukee offers the 13 Amp 6" Small Angle Grinder. The model 6161-30 Angle Grinder delivers 30% more power and durability than anything offered by the competition. With its 100% tool-free design, this small angle grinder gives you ability to freely change any accessory including the hubbed product or adjustable guard without even a wrench. This 6" angle grinder has a powerful 9,000 RPM motor, and an electronic clutch to prevent it from binding up. You'll be impressed by the way the 6161-30 maximizes airflow, while greatly minimizing the debris ingress. Packed with a powerful 13 Amp, 9,000 RPM motor that provides maximum power, performance, and durability. Equipped with an electronic clutch that extends the life of the tool by preventing bind-up. Ant-Vibration Side Handle increases user comfort by reducing vibration during extended periods of use. Grinder features overload protection to maximize the life of the motorprovides soft start to give you maximum control at start-up. Built to maximize airflow and minimizes debris ingress for better motor performancefeatures a 100% tool-free design for user convenience. Maintains a consistent speed under load. MLT613033 6" - Small Angle Grinder,13 Amp. Heat Guns - Milwaukee Corded Milwaukee 8975 Heat Gun Milwaukee Heat Gun, 8975-6 Dual temperature 570 and 1000 F, 11.6 amp motor. Unique impact resistant heating element. Efficient soft air velocity increases surface temperature much faster than conventional hot air heat guns. Three position rocker switch - off, high and low. MLT8975 Dual Temperature Heat Gun Impact Wrench - Milwaukee Corded Milwaukee 9070-20 1/2" Impact Wrench Milwaukee 1/2" Impact Wrench - 9070-20 300 ft. lbs. of torque - more torque saves time. AC/DC rocker switch for quick selection of forward and reverse. Powerful 7.0 amp motor, 1800 RPM and 2600 IPM (no load). Light weight (6 lbs.) with balanced feel and cushioned grip. Pin detent system to securely retain sockets and adapters. MLT907020 1/2" Impact Wrench Does Not Contain Clearance Items 24
Milwaukee - Corded Power Tools Rotary Hammers - Milwaukee Corded Milwaukee 5262-21 SDS Plus Rotary Hammer Kit Milwaukee 5262-21 7/8" SDS Plus Rotary Hammer Kit Powerful 7-amp motor: Delivers 0-1,500 RPM, 0-5,625 BPM. 1.8 Ft-lbs of torque. 3-Mode operation: Choose rotary hammer, hammer only and rotation only for added versatility. Mechanical clutch: Protects the motor when the bit binds. Variable Position Chisel Stop: Allows material to be adjusted, regardless of orientation. Solid bit capacity: 7/8". Thin wall core bit capacity: 2-1/2". D-Handle, 17" Length, 10' double insulated cord. Includes carrying case, depth rod and side handle. MLT526221 1" - SDS-Plus Rotary Hammer Kit, 120V, 8A, 0-1,500 RPM Milwaukee 5263-21 SDS Plus Rotary Hammer Kit Milwaukee 5263-21 5/8" SDS Plus Rotary Hammer Kit Powerful 5.5-amp motor: Delivers 0-3,700 RPM, 0-4,400 BPM and 1.5 ft-lbs of torque. Lightweight 4.6-lb design. Compact 10.9" profile. 2-Mode operation: Choose rotary hammer or rotation only for added versatility. AVS Anti-Vibration System. Mechanical clutch: Protects the motor when the bit binds. Solid bit capacity: 5/8". Thin wall core bit capacity: 2-1/8". 10' double insulated cord. Drop motor handle style. Includes carrying case, depth rod and side handle. MLT526321 5/8" - SDS-Plus Rotary Hammer Kit, 120V, 5.5A, 3,700 RPM Milwaukee 5268-21 SDS Plus Rotary Hammer Kit 1-1/8" SDS Plus Rotary Hammer Kit - MLT526821 Powerful 8A motor delivers 0-1,500 RPM, 0-5,500 BPM and 3.6ft-lbs of impact energy. All metal gear case. Minimized vibration to 10.6 m/s. Mechanical clutch protects the motor when the bit binds up. Variable position chisel stop allows material to be adjusted regardless of orientation. AVS Anti-Vibration System minimizes vibration for maximum comfort. Drop motor handle style. Solid Bit Capacity: 1-1/8". Thin Wall Core Bit Capacity: 3". Length: 12.5". Weight: 7.5 lbs. Includes: Rotary Hammer, Depth Rod, Side Handle and Carrying Case. MLT526821 1-1/8" - SDS-Plus Rotary Hammer Kit, 120V, 8A, 1,500 RPM Milwaukee 5316-21 Spline Rotary Hammer MLT531621 Milwaukee 5316-21 1-9/16" Spline Rotary Hammer Powerful 10.5 Amp Motor: Delivers 450 RPM and 3,000 BPM. Powerful Hammer Mechanism: Delivers 5.5 ft-lbs (7.5J) of impact energy for drilling in hard aggregate. Mechanical clutch protects the tool when the bit binds up. 2-Mode Operation: Rotary hammer and hammer only for maximum versatility. 12-Position Chipping Adjustment: Allows the user to maintain the desired hammer position while chipping in any orientation. Tool length: 18.5". Cord length: 13 ft. Max Core Bit Capacity: 1-9/16". Includes side handle and carrying case. 1-9/16" - Spline Rotary Hammer Kit, 120V,10.5A, 450 RPM Milwaukee 5317-21 SDS Max Rotary Hammer Milwaukee 5317-21 1-9/16" SDS Max Rotary Hammer Powerful 10.5 Amp Motor: Delivers 450 RPM and 3,000 BPM. Powerful Hammer Mechanism: Delivers 5.5 ft-lbs (7.5J) of impact energy for drilling in hard aggregate. Mechanical Clutch: Protects the tool when the bit binds up. 2-Mode Operation: Rotary hammer and hammer only for maximum versatility. 12-Position Chipping Adjustment: Allows the user to maintain the desired hammer position while chipping in any orientation. Tool Length: 17.75". Cord Length: 13 ft. Max Core Bit Capacity: 1-9/16". Includes side handle and carrying case. MLT531721 1-9/16" - SDS-Max Rotary Hammer, 120V,10.5A, 450 RPM Does Not Contain Clearance Items 25
Milwaukee - Corded Power Tools Rotary Hammers - Milwaukee Corded Milwaukee 5342-21 SDS Max Rotary Hammer Milwaukee 2" SDS Max Rotary Hammer Kit - 5342-21 Perform a variety of digging and drilling jobs on floors or the ground with this heavy-duty inline design. The 2" SDS-Max Drive Rotary Hammer delivers 19.9 ft-lbs of blow energy for drilling large holes in concrete or asphalt, bushing, driving ground rods, scraping floors, digging and tamping. The inline design offers more comfortable operation, and the soft-grip side handle can be attached in three positions - plus the rear switch handle - to minimize bending. A system of antivibration absorption and reduction components decreases operator fatigue. Sophisticated electronic feedback offers consistent operation and overload protection. This robust electric hammer features a variable-speed dial for optimum control, a service-reminder light and easy access for maintenance. You can position chisels more efficiently with the SDSmax bit holder system. The tool uses standard SDS-max accessories, and comes with a carrying case. MLT534221 2" - SDS Max Rotary Hammer, 120V,15A, 125-250 RPM Saws - Milwaukee Corded Milwaukee 6232-21 Band Saw Deep Cut VS Milwaukee Deep Cut VS Band Saw - 6232-21 Powerful 11 Amp, 120 VAC, motor provides maximum performance and durability. Proprietray composite material and crush zone barriers provide long lasting rugged protection. All metal direct drive gearing systems delivers max. tool life. Gear protecting clutch extends gear and motor life. Maintains cut speed in the toughest applications. Slimmer motor housing increases user line of site. Debris protection system. LED light. Variable speed dial and trigger. SFPM: 0-380. Capacity: 5" x 5". Weight: 14.5 lbs. Tool Length: 21". MLT623221 Deep Cut Variable Speed Band Saw Kit, 11 Amp. Milwaukee 6390-21 7-1/4" Circular Saw Milwaukee 6390-21 7-1/4" Circular Saw Tilt-Loc New exclusive Tilt-Lok main handle adjusts to the work or most comfortable work position. 10.4 pounds net weight - lightest 7-1/4 inch, 3.25 maximum horsepower saw reduces operator fatigue, easier to handle. 15 amp, 3.25 peak horsepower motor - most powerful circle saw cuts tough materials including headers, microlams and wet lumber with ease. Wide, clear sight line - superior blade visibility from either side. Includes: Carrying Case - Circular Saw Blade - Hex Blade Wrench. MLT639021 Tilt-Lok 7-1/4" Circular Saw Milwaukee 6509-31 Sawzall - 12 AMP MLT650931 Milwaukee 12 Amp Sawzall Recip. Saw, 6509-31 12 Amp motor delivers 0-3,000 SPM for high performance cutting in a variety of materials. 3/4" stroke length. Gear protecting clutch extends gear and motor life by absorbing high impact forces caused by blade lock-ups. Counter weighted mechanism provides reduced vibration for smoother operation. QUIK-LOK blade clamp for fast, tool-free blade changed. 19" Length, 7.1 lbs. Includes Sawzall Recip. Saw and carrying case. Sawzall 12 Amp Motor, 3/4" Stroke Length, w/ Carrying Case Does Not Contain Clearance Items 26
Milwaukee - CORDED Power Tools Saws - Milwaukee Corded Milwaukee 6523-21 Sawzall - 13 AMP Milwaukee 6523-21 13A Rotating Orbital Super Sawzall 360 Rotationg Handle. 13 Amp Milwaukee Built Motor. Orbital Cutting Action. Variable Speed Trigger, 0-3000 SPM. 1-1/4 in. Stroke. Counter Balanced/Gear Protection Systems. Speed Dial. QUIK-LOK Blade Clamp. QUIK-LOK Cord. Includes One Super Sawzall Blade & Case. MLT652321 Sawzall 13 Amp Motor, 360 Rotating Handle, w/ 1-Blade & Carrying Case Milwaukee 6536-21 Sawzall - 13 AMP Orbital Cutting Milwaukee Orbital Super Sawzall Recip Saw, 6536-21 13 Amp Milwaukee Built Motor. Orbital Cutting Action. Variable Speed Trigger, 0-3000 SPM. 1-1/4 in. Stroke. Counter Balanced/Gear Protection Systems. Quik-Lok Blade Clamp. INCLUDES: Carrying Case and Super Sawzall Blade. MLT653621 Sawzall 13 Amp Motor, Orbital Super Sawzall w/quick-loc, w/ 1-Blade & Carrying Case Milwaukee 6538-21 Sawzall - 15 AMP Milwaukee 15.0 Amp Super Sawzall Recip Saw, 6538-21 15 Amp. Milwaukee Motor. Constant Power Technology for unmatched cutting performance. Patented gear protecting clutch that extends gear and motor life by absorbing high impact forces caused by sudden blade lock-ups. Patented counter balanced mechanism. Quik-Lok Blade Clamp System for fast and easy blade changes. Includes: Super Sawzall Blade and Impact Resistant Carrying Case. MLT653821 Sawzall 15 Amp Motor, with 1-Blade & Carrying Case Shears - Milwaukee Corded Milwaukee 6852-20 Shear MLT685220 Milwaukee 18 Gauge Shear, 6852-20 6.8 amp Milwaukee motor, trigger speed control: 0-2,500 rpm spindle speed. 360 swivel head. Ergonomic tactile grip for optimal user comfort. 10 ft. flexible durable runner cord. Includes: Hex Wrench. 18 Gauge Shear Does Not Contain Clearance Items 27
Milwaukee - CORDED Power Tools WBS Drills - Milwaukee Corded Milwaukee Corded Drills MLT02346 MLT31026 MLT31076 MLT537820 1/2" - Magnum Drill, Hole-Shooter, 8' QUIK-LOK Cord 1/2" D-Handle Right Angle Drill Kit, 8' Fixed Cord 1/2" D-Handle Reversing Right Angle Var Speed Drill Kit, 8' QUIK-LOK Cord 1/2" Pistol Grip Dual Torque Hammer Drill, 0-1350/0-2500 RPM, 8' Fixed Cord Milwaukee - Cordless - Power Tools Batteries - for Milwaukee Cordless Tools Milwaukee 48-11-1024 14.4V Battery Milwaukee 14.4V Ni-Cad Battery, 48-11-1024 2.4 amp hour capacity for longer run time. No memory effect - Full battery capacity is always available. Ni-Cad battery, for use with Milwaukee 14.4 volt cordless tools. MLT48111024 14.4V - 2.4A, NiCd Battery Pack Charger Milwaukee 48-11-1822 18V Lith-ion Battery MLT48111822 M18 XC High Capacity REDLITHIUM Battery Two Pack 48-11-1822 This 18V Lithium Ion battery works on the M18 Cordless Tool System and has 3.0 Amp Hours of run-time. Powers over 40 Milwaukee M18 cordless tools. Managed by Milwaukee's exclusive REDLINK Intelligence, the battery features Overload Protection, a Temperature Management System, Individual Cell Voltage Monitoring, Discharge Protection and a Battery Fuel Gauge. Delivers long life and run time with fade-free power. 3-Year Warranty. M18 RedLithium High Capacity Lithium-Ion Battery, 3.0A - 2-Pack Milwaukee 48-11-1830 18V Battery Milwaukee V18 Lithium-Ion Battery, 48-11-1830 Milwaukee's V18 battery offers longer run-time and lighter weight than a standard 18V NiCd battery. Unique Liion chemistry and intelligent technology allows the V18 battery to deliver fade-free power until end of discharge. Also this battery has superior cold weather performance which can be used down to -4 F (-20 C). Not for use with tools 1108, 3108, 5364, and 6516. Battery requires Li-ion/NiCd Charger 48-59-2818. MLT48111830 V18 Lithium-Ion Battery, 3.0A Does Not Contain Clearance Items 28
Milwaukee - Cordless - Power Tools Batteries - for Milwaukee Cordless Tools Milwaukee 48-11-1850 18V RedLithium Battery Milwaukee 18V Battery Pack - 48-11-1850 The M18 Redlithium XC5.0 Extended Capacity Battery pack features superior pack construction, electronics and performance. Delivers up to 2.5X more run-time and 20% more life than standard 18V lithium-ion batteries. Provides optimized performance and overload protection using total system communication between tool, battery and charger. Onboard fuel gauge displays remaining runtime. Operates in extreme cold weather conditions, 0 F. Powers more than 60 Milwaukee M18 cordless power tools. MLT48111850 M18 RedLithium XC 5.0 Lithium-Ion Extended Capacity Battery Pack Milwaukee 48-11-1852 18V RedLithium Battery Milwaukee 48-11-1852 2-Pack Battery REDLINK Intelligence provides optimized performance and overload protection using total system communication between tool, battery, and charger. Best-in-class construction offers long-lasting performance and durability. On-board fuel gauge displays remaining runtime for less downtime on the job. All-weather performance delivers fade-free power in extreme jobsite conditions. Full system compatibility with over 60 Milwaukee M18 cordless power tools. Includes: (2) M18 REDLITHIUM XC 18V 5.0 Ah Extended Capacity. Battery Pack - 48-11-1850 MLT48111852 M18 RedLithium XC 5.0 Lithium-Ion Extended Capacity Battery - 2-Pack Milwaukee 48-11-1860 18V RedLithium Battery MLT48111860 Milwaukee 48-11-1860 18V RedLithium Battery Delivers up to 3X more run-time, 20% more power and 2X more life than standard 18 volt lithium-ion batteries. The M18 REDLITHIUM XC6.0 Extended Capacity Battery Pack features superior pack construction, electronics, and performance to deliver more work per charge and more work over the life of the pack than any battery on the market. The M18 REDLITHIUM XC6.0 Battery features an advanced design, protecting the pack against harsh jobsite environments. This protection routes water away from the electronics and out of the battery pack, extends run-time and life by minimizing heat, and prevents pack failures from vibration or drops. This unique to Milwaukee design also allows the battery to operate in extreme cold weather conditions (below OoF/-18oC). Managed by Milwaukee's exclusive REDLINK Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavyduty situations, while the discharge protection prevents cell damage. It also provides full system compatibility with 100+ M18 cordless solutions. Upgrade to the M18 REDLITHIUM XC6.0 Battery Pack to instantly increase the run-time and durability of your M18 cordless tools. M18 RedLithium XC 6.0 Lithium-Ion Battery Pack Milwaukee 48-11-1890 18V RedLithium Battery MLT48111890 Milwaukee 48-11-1890 18V RedLithium Battery The M18 REDLITHIUM HIGH DEMAND 9.0 Battery Pack delivers up to 5X more run-time, 35% more power, and runs 60% cooler than standard 18V lithium-ion batteries. The battery is best optimized for high draw products and sustained run-time applications, and it provides the next, large step towards full corded replacement when paired with the M18 system of solutions. It maintains full power and runs substantially cooler through heavy applications, allowing users to push their cordless tools harder and longer than ever before. The M18 REDLITHIUM HIGH DEMAND 9.0 battery is fully compatible with 100+ M18 tools. M18 RedLithium High Demand 9.0 Lithium-Ion Battery Pack Does Not Contain Clearance Items 29
Milwaukee - Cordless - Power Tools Batteries - for Milwaukee Cordless Tools Milwaukee 48-11-2230 18V Battery Milwaukee 18V Battery, 48-11-2230 The 18V NiCd 2.4 Ah battery works with all 18V NiCd and V18 tools (excludes models 1108, 3108, 5364 and 6516). Milwaukee uses the highest quality cells for their battery packs, which provides ultimate performance and long life. 2.4 amp hour capacity for longer run-time. Easy to operate release latches. MLT48112230 18V - 2.4A, NiCd Battery Pack Charger Milwaukee 48-11-2232 18V NiCd Battery Pack Milwaukee 18V NiCd Battery Value Pack - 48-11-2232 2-Pack 18V Batteries. 2.4 amp. hour capacity for longer run time. No memory effect - full battery capacity is always available. Easy to operate release latches. For use with all 18V NiCd and V18 tools (excludes models 1108, 3108, 5364, and 6516) MLT48112232 18V - 2.4A, NiCd Battery Pack Charger - 2-Pack Milwaukee 48-11-2440 12V Battery Milwaukee M12 Battery Pack, 48-11-2440 The M12 RedLithium XC 4.0 Extended Capacity Battery Pack features superior pack construction, electronics and performance with 4.0 amp-hours of runtime. Runs cooler and performs in climates below 0 F. Features Redlink intelligence for optimized performance and overload protection. Fuel gauge onboard. Powers most Milwaukee M12 cordless power tools. MLT48112440 M12 RedLithium XC 4.0 Lithium-Ion Extended Capacity Battery Pack Milwaukee 48-11-2460 12V RedLithium Battery MLT48112460 Milwaukee 48-11-2460 12V RedLithium Battery Delivers up to 3X more runtime, 20% more power and 2X more life than standard lithium-ion batteries. The M12 REDLITHIUM 3.0 Compact Battery Pack features superior pack construction, electronics and performance to deliver more work per charge and more work over the life of the pack than any battery on the market. With Milwaukee durability built into each pack, this battery runs cooler and performs in climates below 0 F/-18 C. Its compact design fits in tight work spaces and reduces user fatigue. Managed by Milwaukee's exclusive REDLINK Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. The temperature management system and individual cell monitoring help maximize battery life. Upgrade to the M12 REDLITHIUM 3.0 Compact Battery Pack to instantly increase the runtime and durability of your Milwaukee M12 cordless tools. M12 RedLithium XC 6.0 Lithium-Ion Extended Capacity Battery Pack Does Not Contain Clearance Items 30
Milwaukee - Cordless - Power Tools Batteries - for Milwaukee Cordless Tools Milwaukee 48-11-2830 28V Battery Pack MLT48112830 Milwaukee V28 Lithium-Ion Battery Pack, 48-11-2830 28 volt LITHIUM-ION battery packs power the entire Milwaukee V28 System of power tools. The V28 LITHIUM-ION battery pack offers up to twice the run-time of an 18V NiCd or NiMH pack and is actually lighter than 18V NiCd and NiMH packs! LITHIUM-ION technology allows consistent fade-free power - meaning the first cut is as powerful as the last. V28 LITHIUM-ION battery packs will never develop a memory and can be charged at any time regardless of the pack's current charge level! Press the 'fuel gauge' button and LED indicators display remaining charge left in the pack. Non-slip grip surface. Born-on-date and performance optimizing circuit. M28 Redlithium Lithium-Ion Battery Pack, 3.0A V28 Lithium-Ion Battery Pack Milwaukee M12 Redlithium 12V Battery Milwaukee M12 LITHIUM-ION Cordless Tool Battery, 48-11-2401 LITHIUM-ION batteries deliver longer life and run-time with fade-free power. Ergonomic, compact, and lightweight design for operator comfort. For Use with Milwaukee M12 Tools and Accessories. 1.5 amp hour battery. MLT48112420 M12 Redlithium, Compact, Lithium-Ion Battery Pack, 2.0A Combo Kits - Milwaukee Cordless Milwaukee 0928-23 V28 Combo Kit Milwaukee V28 Lithium-Ion 3-Pack Combo Kit 0928-23 Features V28 Sawzall Reciprocating Saw with 1-1/8" stroke for extremely fast cutting; 28V 1/2" Hammer-Drill with 600 inlbs of maximum torque and V28 Work Light. Kit includes the following: Carrying Case, Universal Charger, two V28 batteries, V28 Sawzall Recip. Saw, V28 1/2" Hammer-Drill/Driver, V28 Work Light, 2 Sawzall Blades, Clip-Lok Belt Clip, Side Handle, Screwdriver Bit, and Hex Key. MLT092823 V28 Cordless 3-Pack - Sawzall, Hammer-Drill/Driver and Work Light Milwaukee 2494-22 M12 2-Tool Combo Kit MLT249422 Milwaukee M12 Lithium-Ion 2-Tool Combo Kit - 2494-22 Kit includes the M12 3/8" Drill/Driver (bare tool), M12 1/4" Hex Impact Driver (bare tool), (2) M12 RedLithium Batteries, M12 Lithium-Ion Battery Charger, and Contractor Bag. M12 3/8" Drill/Driver delivers up to 275 in lbs of torque. On-board battery fuel gauge displays remaining run time. Metal ratcheting chuck for maxium durability. No Load RPM: 0-400, 0-1,500 RPM. LED light. Length: 7-3/8". M12 1/2" Hex Impact Driver delivers 1,000 in-lbs of torque. 0-2,500 RPM for increased fastening speed. 0-2,500 RPM for increased fastening speed. No-Load IPM: 0-3,300. On-board battery fuel gauge. LED light. Length: 6-1/2". M12 Cordless Lithium-Ion 3/8" Drill/Driver & 1/4" Hex Impact Driver Combo Kit w/ 2-Batteries, Charger and Bag Does Not Contain Clearance Items 31
Milwaukee - Cordless - Power Tools Combo Kits - Milwaukee Cordless Milwaukee 2597-22 M12 Combo Kit MLT259722 Milwaukee M12 FUEL 2-Tool Combo Kit - 2597-22 1/2" Hammer Drill/Driver and 1/4" Hex Impact Driver combo kit. Hammer/Drill Driver features a brushless motor that delivers up to 350 in-lbs of peak torque with maximum sustained torque. Chuck Type: 1/2" Metal Single Sleeve - Ratcheting Lock. BPM: 0-25,5000. Speed: 0-450/0-1-1,700 RPM. Hex Impact Driver with powerstate brushless motor delivers up to 1,200 in-lbs of peak torque with maximum sustained torque. No Load Speed: 0-2,650 RPM. The M12 REDLITHIUM XC4.0 battery provides up to 4X more runtime than standard Lithiuim-Ion batteries. Kit Includes 1/2" Hammer Drill/Driver, 1/4" Hex Impact Driver, M12 REDLITHIUM 2.0 Compact Battery Pack, M12 REDLITHIUM XC 4.0 Extended Capacity Battery Pack, M12 Lithium-ion Battery Charger, Belt Clip and Carrying Case. M12 Fuel 2-Tool Combo Kit w/ 1/2" Hammer Drill/Driver & 1/4" Hex Impact Driver w/ 2 Batteries and Charger Milwaukee 2691-22 M18 Combo Kit Drill & Impact Driver Milwaukee M18 Combo Kit - 2691-22 Includes M18 Cordless Lithium-Ion 1/2" Compact Drill/Driver, M18 1/4" Hex Compact Impact Driver, (2) M18 Compact REDLITHIUM Batteries, (1) M18 & M12 Multi-Voltage Charger, and Contractor Bag. 18V Compact Drill/Driver features 4- pole frameless motor with rare-earth magnets for longer life, 425 in-lbs of torque and 0-500/0-1,500 RPM, 1/2" all-metal chuck and built-in LED light. 1/4" Hex Compact Impact Driver features 4-pole frameless motor with rare-earth magnets for longer life, peak torque 1,400 in-lbs, No Load Speed 0-2,200 RPM and No Load IPM 0-3,200. MLT269122 M18 Compact 1/2" Drill Driver, 1/4" Hex Impact Driver Kit Milwaukee 2694-22 M18 Hammer Drill & Sawzall Milwaukee 2694-22 M18 Hammer Drill & Sawzall Combo Kit Includes M18 2602-20 1/2" Hammer Drill/Driver, M18 2620-20 Sawzall Recip. Saw, (2) M18 XC high capacity Lithium-Ion batteries, 1-hour charger, general purpose sawzall blade, and contractor bag. The M18 cordless 1/2" Hammer Drill / Driver has a 4-pole frameless motor that delivers 550 in-lbs of peak torque, 0-450/0-1,700 RPM, & 29,000 BPM. The M18 Cordless Sawzall Reciprocating Saw has a patented gear-protecting clutch and counter balance mechanism. MLT269422 M18 Cordless 1/2" Hammer Drill/Driver & Sawzall Reciprocating Saw Combo Kit Milwaukee 2694-24 M18 4-Pack Combo Kit MLT269424 Milwaukee 2694-24 M18 Cordless 4-Tool Combo Kit Includes M18 2602-20 1/2" Hammer Drill / Driver, M18 2620-20 Sawzall Recip. Saw, M18 6-1/2" Circular Saw w/ 3,500 RPM, M18 Cordless Work Light w/ fold-away hook and 130 rotating head, (2) M18 XC High Capacity Lithium-Ion Batteries, 1-hour charger, General prupose Sawzall Blade, and Contractor Bag. 18V Cordless Combo Kit, Includes Hammer Drill/Driver, Sawzall, Circular Saw & Work Light Does Not Contain Clearance Items 32
Milwaukee - Cordless - Power Tools Combo Kits - Milwaukee Cordless Milwaukee 2695-24 M18 4-Tool Combo Kit MLT269524 18V Cordless 4-Tool Combo Kit - 2695-24 Powered by RED LITHIUM the M18 cordless system delivers more torque, more power, and longer run-time than the competition. Includes 1/2" Hammer Drill Driver, One-Handed Recip. Saw. 1/4" Hex Impact Driver, Work LIght, (2) M18 XC High Capacity Red Lithium Batteries, 1-Hour Charger, General Purpose Sawzall Blade, and Contractor Bag. The Hammer Drill / Driver delivers 525 in-lbs of peak torque, 0-550/0-1,700 RPM, & 29,000 BPM. The One-Handed Recip. Saw features a dual gear anti-vibration system for unmatched comfort and control. 1/4" Hex Impact delivers 1400 In-lbs of Torque. M18 Work Light provides a fold-away hook for hands free use and a 135 rotating head to direct light at the work area. The DPM overload protection prevents damage to the tool and battery in abusive situations. Works with M18 XC High Capacity RED LITHIUM and M18 Compact RED LITHIUM Batteries. 18V Cordless 4-Pack - Hammer Drill Driver, Recip. Saw, Impact Driver & Work Light Milwaukee 2696-24 M18 4-Tool Combo Kit Milwaukee M18 Cordless LITHIUM-ION 4-Tool Combo Kit 2696-24 The 2696-24 M18 Cordless 4-Tool Combo Kit includes the M18 1/2" Hammer Drill / Driver (2602-20), M18 Sawzall Recip Saw (2620-20), M18 1/4" Hex Impact Driver (2650-20), and M18 Work Light (49-24-0171). The M18 Cordless LITHIUM-ION System's patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by RED LITHIUM the M18 cordless system delivers more torque, more power, and longer run-time than the competition. MLT269624 M18 Cordless Lithium-ion 4-Tool Combo Kit: 1/2" Hammer Drill/Driver, Sawzall, 1/4" Hex Impact Driver, LED Work Light, 2-M18 Batteries, Charger & Bag Milwaukee 2697-22 M18 Hammer Drill & Impact Driver Milwaukee M18 Hammer Drill Driver & Compact Impact Driver Combo Kit 2697-22 M18 1/2" Hammer Drill Driver delivers 550 in-lbs of peak torque, 0-450/0-1,700 RPM, & 29,000 BPM. M18 1/4" Hex Compact Impact Driver featuring a Milwaukee Designed Impact Mechanism for 1,400 in-lbs of torque. Ditigial Power Management: Overload protection prevents damage to the tool and battery in abusive situations. Works with 18 XC High Capacity Lithium-Ion Batteries and M18 Compact Lithium-Ion Batteries. Includes Hammer Drill Driver, Hex Compact Impact Driver, (2) 18 XC High Capacity Lithium-Ion Batteries, 1-Hour Charger and Contractor Bag. MLT269722 M18 Cordless 1/2" Hammer Drill/Driver & 1/4"Hex Impact Driver Combo Kit w/ 2 Batteries, Charger & Bag Milwaukee 2796-22 M18 2-Tool Combo Kit Milwaukee M18 Fuel 2-Tool Combo Kit w/ One-Key - 2796-22 Kit includes M18 Fuel w/ One-Key 1/2" Hammer Drill/Driver (tool only) 2706-20, M18 Fuel w/ One-Key 1/4" Hex Impact Driver (tool only) 2757-20, (2) M18 RedLithium XC5.0 Extended Capacity Battery Pack, M18 & M12 Multi-Voltage Charger, Belt Clip, Bit Holder, Side Handle, and Carrying Case. M18 Fuel 1/2: Hammer Drill/Driver has a Powerstate Brushless Motor and delivers 1,200 in-lbs of peak torque and up to 2,000 RPM for faster drilling speeds. Is One-Key compatible. No Load RPM: 0-550-2,000. BPM: 32,000. Length: 7.60" M18 Fuel 1/4" Hex Impact Driver has a Powerstate Brushless Motor that delivers 1,800 in-lbs of fastening torque for faster driving speeds. Is One-Key compatible. No Load RPM: 0-3,000. No Load IPM: 0-3,700. Length: 5.25". Both tools are One-Key enabled, allowing users to wireless connect to the toolwith a smart phone to provided unlimited customization and control of the tool's performance. One-Key mobile app features predetermined set-ups for specific fasteners and materials, or provides complete control over output speed and power to customize the tool. Tool's memory supports up to 4 custom profiles that can be easily accessed with the touch of a button on the tool. Both tools have RedLink Plus Intelligence that prevents damage to the tool and battery due to overloading or overheating. MLT279622 M18 Fuel Combo Kit w/ ONE-KEY - 1/2" Hammer Drill/Driver, 1/4" Hex Impact Driver, (2) Batteries, Multi-Volt Chgr., Belt Clip, Bit Holder, Side Handle & Case Does Not Contain Clearance Items 33
Milwaukee - Cordless - Power Tools Combo Kits - Milwaukee Cordless Milwaukee 2894-22 M18 Combo Kit MLT289422 Milwaukee 2894-22 M18 Combo Kit The 2894-22 M18 FUEL Cordless 2-Tool Combo Kit includes the M18 FUEL 1/2" Hammer Drill/Driver (2704-20), M18 FUEL SAWZALL Reciprocating Saw (2720-20). M18 FUEL features a POWERSTATE Brushless Motor, REDLINK PLUS Electronic Intelligence and REDLITHIUM Battery Technology, this results in longer motor life, more run time and more power. The POWERSTATE brushless motor works harder and lives longer than all leading competitors, while reducing noise and cooling more rapidly to deliver years of maintenance-free performance. The Milwaukee REDLITHIUM XC5.0 Battery is the most durable pack on the market and provides up to 2X more run time than standard Lithium-Ion batteries. REDLINK PLUS Intelligence hardware and software is the world s most advanced system of cordless power tool electronics that will maximize performance and protect the user s investment. Includes: (1) M18 FUEL 1/2" Hammer Drill/Driver (Bare Tool) (2704-20), (1) M18 FUEL SAWZALL Reciprocating Saw (Bare Tool) (2720-20), (2) M18 REDLITHIUM XC5.0, Extended Capacity Battery Pack (48-11-1850), (1) M18 & M12 Multi-Voltage Charger (48-59- 1812), (1) Belt Clip, (1) Bit Holder, (1) Contractor Bag, (1) SAWZALL Blade, (1) Side Handle M18 Fuel 2-Tool Combo Kit - 1/2" Hammer Drill/Driver, SAWZALL Reciprocation Saw, (2) Batteries, Multi-Volt Chgr., Belt Clip, Bit Holder, SAWZALL Blade, Side Handle & Case Milwaukee 2897-22 M18 Hammer Drill Driver & Hex Impact Driver Kit Milwaukee 2897-22 M18 FUEL 1/2" Hammer Drill Driver & 1/4" Hex Impact Driver Kit Includes the M18 FUEL Hammer Drill (2704-20), the Most Powerful 18-volt cordless drill on the market. Includes the M18 FUEL 1/4" Hex Impact Driver (2753-20), the Most Powerful Impact Driver in its class. M18 FUEL features the most advanced cordless technology available. POWERSTATE Brushless Motor. REDLINK PLUS Electronic Intelligence. REDLITHIUM Battery Technology, resulting in longer motor life, more run time, and more power. MLT289722 M18 FUEL 1/2" Hammer Drill Driver & 1/4" Hex Impact Driver Kit Cordless - Blower Milwaukee 2728-21 M18 FUEL Cordless Handheld Blower Kit MLT272821 Milwaukee 2728-21HD M18 FUEL 450 CFM Handheld Blower Kit The M18 Fuel Blower has the power to clear from 15 ft. of distance, generating up to 30% less noise than competing gas models while providing the longest max CFM run time compared to other cordless blowers. Designed to meet landscape maintenance professionals needs, it features a POWERSTATE brushless motor and runs off REDLITHIUM power for the longest run times and most consistent power available. Features: M18 FUEL 450 CFM Handheld Blower - 2728-20. M18 REDLITHIUM HIGH DEMAND 9.0 Ah Lithium-Ion Battery Pack - 48-11-1890. M12/M18 Multi-Voltage Charger - 48-59- 1812. Cordless - Cable Cutter M18 FUEL100 MPH 450 CFM 18-Volt Lithium-ion Brushless Cordless Handheld Blower Kit Milwaukee 2472-20 M12 Cable Cutter Milwaukee M12 600 MCM Cable Cutter 2472-20 Powerful open jaws cut effortlessly through 600 MCM copper and 750 MCM aluminum. Delivers a round and installationready cut. Ratcheting mechanism fits into tight panels for more effective cutting. Auto release lever. 2-speed gear box delivers power needed to cut large diameter cable and then switches into high speed to sllice quickly through a variety of smaller and more common wire types. Delivers up to 150 cuts of 500 MCM copper per charge. Built-in LED light. Length: 10-1/2". Weight: 6.2 lbs. Powered by 12-volt Redlithium battery (sold separately). MLT247220 M12 Cordless 600 MCM Cable Cutter (bare tool only) Does Not Contain Clearance Items 34
Milwaukee - Cordless - Power Tools Cordless - Cable Cutter Milwaukee 2472-21XC Cable Cutter Kit MLT247221XC MLT48440410 Milwaukee 2472-21XC Cable Cutter Kit Powerful jaws cut effortlessly through 600MCM Cu / 750 MCM Al and 1-3/16" communication cable. The compact size and sissors style enable cutting in crowded panels without looping, ratcheting or long arms freeing up precious space. Delivers up to 150 cuts of 500 MCM CU per charge. 2 Speed gear box delivers power for large cables, and speed for more frequent sizes. Auto release lever provides ability to cut, reload and quickly repeat. Jaw Height: 4". Jaw Opening: 1.44". LED Light. Includes: M12 Cable Cutter, (1) Red Lithium M12 XC Battery, Multi Voltage Charger and Hard Carrying Case. M12 Cordless 600 MCM Cable Cutter Kit w/ Battery, Charger & Case REPLACEMENT BLADE for Cable Cutter 2472-21XC Cordless - Caulk Gun Milwaukee Milwaukee 2641-21CT M18 Caulk Gun MLT264121CT Milwaukee M18 Caulk & Adhesive Gun Kit - 2641-21CT All metal gears provide an industry leading 950 lbs. of force for the highest viscosity materials. Variable speed trigger allows for max. control of the flow rate and bead within. Steady material flow rate and even beads at all viscosity levels. Anti-drip mechanism instantly stops material from expelling upon trigger release. Rotating quick-change collar. 6-setting max. speed dial. Voltage: 18V. No Load Speed: 0-21 inches per minute. Dimensions: 18.5"L x 11.25"H x 3.25"W. Includes: M18 Caulk Gun, (1) M18 Compact Red Lithium Battery, (1) 30-Minute Charger, (1) 10 oz. Carriage, and (1) 10 oz. Plunger Rod and Piston Assembly. M18 Cordless 10oz. Caulk & Adhesive Gun Kit Cordless - Crimper, Press & Jaws Milwaukee 2678-20 M18 Press Tool Kit MLT267820 M18 FORCE LOGIC 6T Utility Crimper Kit w/ D3 Grooves & Fixed BG Die The M18 FORCE LOGIC 6T Crimpers are the Most Reliable Way to Crimp. Moving the Grip to the Center of Tool Delivers Ultimate Control in Class 3 Gloves, Improving Alignment and Accuracy. M18 FORCE LOGIC 6T Crimpers, feature the industry's first adaptive pressure control system, PFM. PFM actively measures pressure and automatically modifies all performance levels of the system allowing the high speed hydraulic pump to power through the beginning of a cycle and land at precisely the right pressure to complete the crimp. The result, Milwaukee crimpers are the most accurate, fastest and most durable crimpers in the world. Milwaukee Crimpers feature a fully enclosed high speed hydraulic pump, Brushless Motor, REDLINK Electronics and REDLITHIUM Batteries delivering Ultimate Reliability in the toughest conditions and up to 4X longer life. Milwaukee 6T Utility Crimpers deliver Confidence for any Power Emergency. Featuring Milwaukee ONE KEY Technology, Milwaukee 6T Crimpers enable you to store real time crimp data, generate professional reports, view historical tool performance data and sync it all wirelessly to the cloud for easy access. For ultimate versatility Milwaukee M18 750 MCM Cable Cutting Jaw (49-16-2672) and M18 477 ACSR Jaw (49-16-2673) are easily interchangeable on all 2678-20 models. The Kit Includes two M18 2.0 REDLITHIUM Batteries, AC/DC Charger, Bucket Bag and Carabineer. Fully balanced design provides ultimate control and accuracy with glass 3 gloves, simplifying the alignment process. PFM: automatically modifies output based on connector, ensuring optimal pressure every time. Fastest crimp time in the industry PFM 2.5X faster crimp speed. Receive instant pressure verification with green light, tool records and stores every crimp made. Weather protected electronics keep dirt, dust and moisture out. Hydraulic system is optimized for consistent performance from 0-degree F - 122-degree F. Brushless motor delivers up to 4X longer life. In-line design and 350-degree head rotation for easy access anywhere. Tool records and stores every crimp made, 1 key enabled for professional report building. M18 system compatible. Included: (1) 2678-20, (1) 49-16-BGD3, (1) 2710-20, (2) 48-11-1820, (1) carabineer, (1) utility bucket bag M18 Force Logic 6T Utility Crimper Kit (Tool Only) Does Not Contain Clearance Items 35
Milwaukee - Cordless - Power Tools Cordless - Crimper, Press & Jaws Milwaukee 2773-22 M18 Press Tool Kit Milwaukee 2773-22 M18 Press Tool Kit The M18 Force Logic Press Tool is the smallest, lightest and most intelligent full size press tool in the market today. Featuring a one-handed, in-line design, the M18 Force Logic Press Tool is not only offer the most ergonomic solution for navigating around installed pipes, but also deliver on the highest level of press accuracy and reliability available on the market. Utilizing Milwaukee Redlink Electronics, the M18 Force Logic Press Tool monitors the force output to ensure quality connections and provide the user peace of mind by visually indicating both a secure connection and when the tool needs calibration. Featuring the best calibration standard in the industry, the tool only require service every 40,000 crimps. This allows users up to 4X more connections between services, keeping the tool on the jobsite up to 4X longer than competitive units. When used with M18 Force Logic Press Jaws and Rings this tool delivers quality press connections on all major fitting brands including Viega ProPress Systems, Elkhart APOLLOXPRESS, and Grinnell G-Press copper systems. Powered by the M18 Red Lithium battery means this is the only press system where you can Cut, Fasten and Connect on One System. The smallest and lightest full sized press tool in the market at only 8.0 lbs. Balanced, in-line design suitable for one-handed use. Press indicator provides visual assurance of a quality connection. Industry leading 40,000 Cycles between calibration inspections. Interchangeable jaws enable the quick adjustments from 1/2" - 2". Rings enable use up to 4". M18 System provides up to 35+ solutions on one pack. (1) M18 FORCE LOGIC Press Tool Kit (2673-20), (2) M18 REDLITHIUM XC Extended Capacity Battery (48-11-1828), (1) M18 & M12 Multi-Voltage Charger (48-59- 1812),(1) M18 1 1/2" Jaw (49-16-2654), (1) M18 1/2" Jaw (49-16-2650), (1) M18 3/4" Jaw (49-16-2651), (1) M18 1" Jaw (49-16-2652), (1) M18 1 1/4" Jaw (49-16-2653), (1) M18 2" Jaw (49-16-2655), (1) Hard Carrying Case. MLT277322 M18 Force Logic Press Tool Kit w/ 6 Jaws - 1/2" - 2" Milwaukee 49-16-BGD3 M18 6T Fixed BG Crimping Jaw M18 6T Fixed BG Crimping Jaw Easily Interchangeable on any 2678-20 Tool. Clear Die / Groove Markings for Easy Identification. Permanent BG Die to Maximize Productivity. Accepts Milwaukee and all industry standard "W" Style Dies. MLT4916BGD3 M18 6T Fixed BG Crimping Jaw Cordless - Drain Tools Milwaukee 2572B-21 M12 AIRSNAKE Drain Cleaning Air Gun Kit M12 AIRSNAKE Drain Cleaning Air Gun Kit - 2572B-21 The M12 AIRSNAKE Drain Cleaning Air Gun is the industry's first drain cleaning machine designed to clear through drain covers and traps with powered air. The M12 AIRSNAKE allows users to clear clogged drains while leaving fixtures and drain covers intact. Designed for 1"-4" drain lines, the M12 AIRSNAKE has the power to clear up to 35 feet, past vent stacks and tees while the variable pressure dial allows for control on delicate pipe systems. Powered air flushes water out of pipes, completely removing grease and sludge from pipe walls. With the ability to work over sinks and eliminate retrieval mess, Drain Professionals, Plumbers, and Facility Maintenance will be able to work faster when clearing clogs. The M12 AIRSNAKE is powered by REDLITHIUM Batteries, which deliver more work per charge and more work over pack life than competitors. REDLINK Intelligence provides optimized performance and overload protection against abusive situations. Clears through Drain Covers & Traps with Powered Air Instantly Reach Clogs 35' OUT. Removes Grease & Sludge from Pipe Walls. Up to 50 PSI for Tough Clogs Down the Line. Power to Clear Clogs Past Vent Stacks. Variable Pressure Control to Select the Right PSI for Compression fittings and Older Drain Lines. Optimized Attachments for Sinks, Toilets, Floor Drains. Over 25 Pressure Cycles on a Single Charge. Interchangeable Attachments Optimized for Seals on 1"-4" drains, Permanent Drain Stoppers, and Toilets. 15 Degree Offset Connector for Drain Access Under Fixed Faucets. Includes: 1 - Plastic Carrying Case. 1 - M12 AIRSNAKE Drain Cleaning Air Gun (Tool Only) (2572A-20). 1 - M12 REDLITHIUM 2.0 Compact Battery Pack (48-11-2420). 1 - M12 Lithium-ion Battery Charger (48-59-2401). MLT2572B21 M12 AIRSNAKE Drain Cleaning Air Gun Kit Does Not Contain Clearance Items 36
Milwaukee - Cordless - Power Tools Cordless - Drain Tools Milwaukee 2772A-21 M18 FUEL Drain Snake Milwaukee M18 Fuel Drain Snake w/ CABLE DRIVE Kit M18 FUEL Drain Snake with CABLE-DRIVE Locking Feed System represents the next level in performance for handheld machines, and is the first to bring brushless motor technology to the drain cleaning industry. The POWERSTATE Brushless Motor provides more clearing power than corded competitors for tough jobs through 3" drain lines. REDLINK PLUS Intelligence ensures maximum performance under load and improves control throughout the entire process. The REDLITHIUM battery pack powers through multiple jobs on a single charge, delivering cordless mobility, safety, and power supply to the drain cleaning industry. CABLE-DRIVE Locking Feed System maintains the selected feed speed, and its twist lock design auto-adjusts to all compatible cable sizes for the best cable grip when feeding and working the clog. M18 FUEL Drain Snake has a fully enclosed drum to ensure the best protection and mess containment. Includes: (1) M18 & M12 Multi-Voltage Charger (48-59-1812) (1) M18 REDLITHIUM 2.0 Compact Battery Pack (48-11-1820) 1) 5/16" x 35' Inner Core Bulb Head Cable w/ RUST GUARD Plating (48-53-2673) (1) Storage Bucket (1) M18 FUEL Drain Snake (Tool Only) MLT2772A21 M18 FUEL Drain Snake w/ CABLE DRIVE (Tool Only) Milwaukee 2775B-211 M18 FUEL Sectional Drum System Kit Milwaukee 2775B-211 M18 FUEL Sectional Drum System Kit M18 FUEL SWITCH PACK Sectional Drum System is the first drain cleaning solution that combines the benefits of sectional and drum machines, creating the single most versatile and mobile machine on the market. Tackling the most frequent challenge of any drain cleaning application, getting the machine onto the job, the SWITCH PACK System utilizes a modular design with backpack straps for the easiest transport to any roof, drain, crawl space, or clean out. The tool-free drum connection allows users to quickly interchange between cable sizes, or add a second drum to reach 100' down the line. All SWITCH PACK drums are fully enclosed providing the best protection against mess.the POWERSTATE Brushless Motor delivers more clearing power than corded competitors for tough jobs through 4" drain lines. REDLINK PLUS intelligence improves control with an integrated drum brake, slowing the machine up to 5X faster than competitor drums. The REDLITHIUM battery pack powers through multiple jobs on a single charge, delivering cordless mobility, safety, and power supply to the drain cleaning industry. Includes: (1) 3/8" x 50' Inner Core Coupling Cable w/ RUST GUARD Plating (48-53-2773) (1) SWITCH PACK Drum w/ Anchor Cable (47-53-2775) (1) M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack (48-11-1850) (1) 5PC Medium Cable Head Attachment Kit w/ RUST GUARD Plating (48-53-2790) (1) M18 & M12 Multi-Voltage Charger (48-59-1812) (1) M18 FUEL SWITCH PACK Sectional Drum System (2775-211) MLT2775B211 M18 FUEL SWITCH PACK Sectional Drum System 3/8" Kit Cordless - Drill Drivers/Screwdrivers Milwaukee 0726-22 28V Hammer Drill MLT072622 Milwaukee M28 Cordless 1/2" Hammer-Drill Kit, 0726-22 Revolutionary 28V LITHIUM-ION Technology. 750 in-lbs. of Maximum Torque. 1-2" all-metal, single-sleeve ratcheting cuck with carbide jaws. Up to 2X run-time of 18V tools. Ideal for drilling larger holes and driving larger screws faster. Voltage: 28DC. Speed: 0-450 / 0-1,800. Length: 9-1/4". Tool Weight: 6.7 lbs. Includes: M28 Cordless 28 Volt 1/2 in. Hammer-Drill, (2) 28V LITHIUM-ION Batteries - 48-11-2830, 1 Hour Charger - 48-59-2819, Side Handle, No. 2 Phillips Bit. M28 Cordless 1/2 in. Hammer Drill Kit w/ 2 Batteries Does Not Contain Clearance Items 37
Milwaukee - Cordless - Power Tools Cordless - Drill Drivers/Screwdrivers Milwaukee 2401-22 M12 Micro Driver MLT240122 Milwaukee Micro Screwdriver Kit, 2401-22 The new Milwaukee M12 Screwdriver has the power to drive the majority of common small fasteners, and the run-time of full day screw driving without recharging. The compact size allows the users to work in tight places for increased convenience. Quick Bit-Loading 1/4 in. Hex Chuck for bit insertion and release with one hand. Battery Fuel Gauge for displaying remaining run-time. Metal Gear Housing for job site durability. Built-in LED for illumination of dark work spots. Variable Speed Trigger for output power control. Over-mold Side and Grip for secure grip and work surface protection. Comes With Standard Equipment: 12V LITHIUM-ION Battery Pack (48-11-2401), 12V Charger (48-59-2401), Compact Driver Storage Bag (48-55-2401), #2 Phillips 1/4" Hex Insert Bit (48-30-1520). M12V Li-ion Micro Driver Kit, 1/4" Quick-Change Chuck Milwaukee 2404-20 M12 Hammer Drill/Driver Milwaukee M12 Cordless Hammer Drill/Driver 2404-20 The M12 FUEL 1/2" Hammer Drill/Driver delivers up to 350 in-lbs of peak torque with maxium sustained torque to complete a variety of applications. Features REDLINK Plus Intelligence providing optimized performance and overload protection. BPM: 0-25,500. Speed: 0-450/0-1,700 RPM. Chuck Type: 1/2" Metal Single Sleeve - Ratcheting Lock. Length: 7.75". On-board fuel gauge. Built-in LED light. Can be used with the Redlithium 2.0 Compact Battery Pack and 4.0 Extended Capacity Battery pack (Sold separately). MLT240420 M12 Fuel Cordless 1/2" Hammer Drill/Driver (bare tool only) Milwaukee 2404-22 M12 Hammer Drill/Driver Kit Milwaukee M12 Cordess Hammer Drill/Driver Kit 2404-22 The M12 FUEL 1/2" Hammer Drill/Driver delivers up to 350 in-lbs of peak torque with maxium sustained torque to complete a variety of applications. Features REDLINK Plus Intelligence providing optimized performance and overload protection. BPM: 0-25,500. Speed: 0-450/0-1,700 RPM. Chuck Type: 1/2" Metal Single Sleeve - Ratcheting Lock. Charge Time: 30 Minutes. On-board fuel gauge displays remaining run-time. Built-in LED light. Kit includes M12 Fuel Hammer Drill/Driver, M12 REDLITHIUM 2.0 Compact Battery Pack, M12 REDLITHIUM XC 4.0 Extended Capacity Battery Pack, M12 Lithium-ion Battery Charger, Belt Clip and Carrying Case. MLT240422 M12V Fuel Cordless 1/2" Hammer Drill/Driver Kit w/ 2 Batteries, Charger & Case Milwaukee 2407-22 M12 Drill/Driver Kit MLT240722 Milwaukee M12 Cordless Drill/Driver Kit 2407-22 The powerful compact M12 cordless Lithium-Ion 3/8" Drill/Driver delivers up to 275 in lbs of torque. No Load RPM: 00-400, 0-1,500 RPM. Battery Charge Time: 30 Minutes. On-board battery fuel gauge and LED light. 3/8" Metal ratcheting chuck. Ergonomic handle design for increased comfort. Length: 7-3/8". Kit includes Drill/Driver, (2) M12 Redlithium Batteries, (1) M12 Lithium-ion Battery Charger, Belt Clip and Carrying Case. M12 Cordless 3/8" Drill/Driver Kit w/ 2 Batteries, Charger, Belt Clip & Case Milwaukee 2408-22 M12 Hammer Drill/Driver Milwaukee M12 3/8" Hammer Drill/ Driver Kit Delivers up to 275 in-lbs of Torque. On-board battery fuel gauge displays remaining run time. New ergonomic handle design for increased comfort. Metal Ratcheting chuck for maximum durablility. BPM: 0-22,500, no load RPM: 0-400,0-1,500 RPM. 12V lithium-ion battery charger, M12 REDLITHIUM battery, belt clip and carrying case included. MLT240822 M12 Cordless 3/8" Hammer Drill/Driver Kit w/ Battery, Battery Charger, Belt Clip & Case Does Not Contain Clearance Items 38
Milwaukee - Cordless - Power Tools Cordless - Drill Drivers/Screwdrivers Milwaukee 2615-21 M18 Right Angle Drill Milwaukee M18 Cordless Right Angle Drill - 2615-21 Compact 18V right angle drill driver. 125 in-lbs torque. 3.75" total head length. 3/8" single sleeve ratcheting chuck. Extended multi-position trigger. Electronic clutch has 11 setting and drill mode for complete control in fastening applications. Extended multi-position handle provides convenience and versatility. Built in LED light. Includes (1) M18 XC REDLITHIUM battery pack, 1 hour charger and carrying case. MLT261521 M18 Cordless 3/4" Right Angle Drill w/ Charger & Battery Pack Milwaukee 2704-20 M18 Hammer Drill/Driver Milwaukee M18 Hammer Drill/Driver 2704-20 (1) M18 FUEL 1/2" Hammer Drill/Driver (Bare Tool) (2704-20). POWERSTATE Brushless Motor delivers 1,200 in-lbs of Peak Torque and up to 2,000 RPM for Faster Drilling Speeds. REDLINK PLUS Intelligence prevents damage to the tool and battery due to overloading or overheating. REDLITHIUM Batteries deliver more work per charge and more work over the life of the battery 18V. Peak Torque: 1,200 in-lbs. Chuck Type: 1/2" Metal Single Sleeve - Ratcheting Lock. (1) Belt Clip. (1) Bit Holder. (1) Side Handle. MLT270420 M18 Cordless Drill Hammer, Tool Only Milwaukee 2704-22 M18 Hammer Drill/Driver Kit Milwaukee M18 FUEL 1/2" Hammer Drill Driver Kit M18 FUEL 1/2" Hammer Drill/Driver, 2x M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack, M18 & M12 Multi- Voltage Charger, Belt Clip, Bit Holder, Side Handle, Carrying Case MLT270422 M18 FUEL 1/2" Hammer Drill/Driver Kit Cordless - Drill Hole Hawg Milwaukee 2708-20 M18 Hole Hawg Rt. Angle Drill MLT270820 Milwaukee M18 FUEL Hole Hawg - 2708-22 M18 FUEL Hole Hawg Right AngleDrill w/ Quick-Lok (bare tool). Powerstate brushless motor provides constant power under heavy load to complete holes faster than corded drills. Redlink Plus Intellgence ensures optimal performance and overload protection. RedLithium battery pack provides up to 2X more run time. Quik-Lok chuck for keyless, one-handed bit changes. Voltage: 18V. Length: 17". Speed: 0-1,200 RPM. Capacity in Wood: Auger Bits: Up to 1-1/4" and Self-feed Bits: Up to 2". M18 FUEL Cordless Hole Hawg Right Angle Drill w/ QUIK LOK (bare tool) Does Not Contain Clearance Items 39
Milwaukee - Cordless - Power Tools Cordless - Drill Hole Hawg Milwaukee 2708-22 M18 Hole Hawg Rt. Angle Drill Kit Milwaukee M18 Hole Hawg Right Angle Drill Kit (1) M18 Hole/Super Hawg Right Angle Drill, (2) M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack (48-11-1850), (1) M18 & M12 Rapid Charger (48-59-1808), (1) Chuck Key, (1) Side Handle, (1) Contractor Bag MLT270822 M18 Fuel Cordless Hole Hawg Right Angle Drill Kit w/ 2-Batteries & 1 Charger Milwaukee 2708-22HD M18 FUEL Hawg Right Angle Drill Kit w/ Quik Lok Milwaukee 2708-22 M18 FUEL Hawg Right Angle Drill Kit w/ Quik Lok The M18 FUEL HOLE HAWG Right Angle Drill from Milwaukee drills faster than the original corded HOLE HAWG, delivers over 300 7/8 in. Holes Per Charge, and is over 30% lighter weight than its corded predecessor. The QUIK-LOK chuck is designed for quick, keyless, one-handed bit changes and is compatible with 7/16 in. Hex flat or groove shank bits. Optimized for electricians, the M18 FUEL HOLE HAWG is the first cordless tool of its kind, delivering game-changing productivity for professionals drilling with augers up to 1-1/4 in. and self-feed bits up to 2 inches. The POWERSTATE brushless motor delivers better performance than corded drills, especially under heavy load. REDLINK PLUS Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. The M18 REDLITHIUM HIGH DEMAND 9.0 Battery Pack delivers up to 5X more run-time, 35% more power, and runs 60% cooler than standard 18V lithium-ion batteries. It maintains full power and runs substantially cooler through heavy applications, allowing users to push their cordless tools harder and longer than ever before. The M18 REDLITHIUM HIGH DEMAND 9.0 battery is fully compatible with 100+ M18 tools. POWERSTATE Brushless Motor Provides constant power under heavy load to complete holes faster than corded drills.redlink PLUS Intelligence Ensures optimal performance and overload protection to prevent damage to the tool or battery during heavy applications. M18 REDLITHIUM HIGH DEMAND 9.0 Battery Pack delivers up to 5X more run-time, 35% more power, and runs 60% cooler than standard 18V lithium-ion batteries. QUIK-LOK Chuck for keyless, one-handed bit changes and accepts most 7/16 in. hex flat or groove shank bits. Includes: M18 FUEL 18V Quik-Lok Hole Hawg Right Angle Drill - 2708-20. (2) M18 18V 9.0 Ah REDLITHIUM High Demand Battery Pack - 48-11-1890. M18 & M12 Multi-Voltage Rapid Charger - 48-59- 1808. Contractor Bag MLT270822HD M18 Fuel Cordless Hole Hawg Right Angle Drill Kit w/ 2-Batteries & 1 Charger Milwaukee 2709-22 M18 FUEL Super Hawg Right Angle Drill Kit MLT270922 Milwaukee 2709-22 Right Angle Drill Kit Milwaukee M18 FUEL 1/2" Super Hawg Right Angle Drill Kit, 0-350/0-950 RPM, Mechanical clutch in low speed. High operating speeds for maximum productivity, Cordless, POWERSTATE Brushless motor, REDLINK PLUS Intelligence, REDLITHIUM XC5.O Batteries, M18 & M12 Rapid Charger M18 Fuel Cordless Super Hawg Right Angle Drill Kit w/ 2-Batteries & 1 Charger Milwaukee 2711-22 M18 FUEL Super Hawg Right Angle Drill Kit w/ Quik Lok Milwaukee 2711-22 Drill Kit Milwaukee M18 FUEL 1/2" Super Hawg Right Angle Drill Kit w/ Quik Lok QUIK-LOK chuck is designed for quick, keyless, one-handed bit changes and is compatible with 7/16" Hex shank or 3-flat shank bits, 0-350/0-950 RPM, Mechanical clutch in low speed. High operating speeds for maximum productivity, Cordless, POWERSTATE Brushless motor, REDLINK PLUS Intelligence, REDLITHIUM XC5.O Batteries, M18 & M12 Rapid Charger MLT271122 M18 Fuel Cordless Super Hawg Right Angle Drill Kit w/ QUIK LOK Does Not Contain Clearance Items 40
Milwaukee - Cordless - Power Tools Cordless - Drill Hole Hawg Milwaukee 2711-22HD M18 FUEL Super Hawg Right Angle Drill Kit w/ Quik Lok Milwaukee 2711-22HD M18 FUEL Super Hawg Right Angle Drill Kit w/ Quik Lok The first tool of its kind, the M18 FUEL SUPER HAWG delivers the power and run-time necessary to complete cordless rough-ins. Optimized for Plumbing and HVAC professionals, this drill powers through 6 in. holes and can drill over 150 2-9/16 in. holes per charge in 2X dimensional lumber with a self-feed bit. The QUIK-LOK chuck is designed for quick, keyless, one-handed bit changes and is compatible with 7/16 in. Hex shank or 3-flat shank bits. The POWERSTATE brushless motor delivers constant power under heavy load to maintain drilling speed. REDLINK PLUS Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. The M18 REDLITHIUM HIGH DEMAND 9.0 Battery Pack delivers up to 5X more run-time, 35% more power, and runs 60% cooler than standard 18V lithium-ion batteries. It maintains full power and runs substantially cooler through heavy applications, allowing users to push their cordless tools harder and longer than ever before. The M18 REDLITHIUM HIGH DEMAND 9.0 battery is fully compatible with 100+ M18 tools. POWERSTATE Brushless Motor Provides constant power under heavy load to power through 6 in. holes. REDLINK PLUS Intelligence Ensures optimal performance and overload protection to prevent damage to the tool or battery during heavy applications. M18 REDLITHIUM High Demand 9.0 Battery Pack delivers over 150 2-9/16 in. holes per charge, 35% more power, and runs 60% cooler than standard 18V lithium-ion batteries. QUIK-LOK Chuck for keyless, one-handed bit changes and accepts most 7/16 in. hex shank or 3-flats shank bits. Includes: M18 FUEL 18V Cordless Lithium-Ion Quik-Lok Super Hawg Right Angle Drill - 2711-20. (2) M18 18V 9.0 Ah REDLITHIUM High Demand Battery Pack - 48-11-1890. M18 & M12 Multi-Voltage Rapid Charger - 48-59-1808. Side Handle. Contractor's Bag MLT271122HD M18 Fuel Cordless Super Hawg Right Angle Drill Kit w/ QUIK LOK Cordless - Dust Extractors Milwaukee 2306-22 M12 HammerVac Universal Dust Extractor Kit MLT230622 M12 HAMMERVAC Universal Dust Extractor Kit 2306-22 The only universal tool of its kind on the market, the cordless Milwaukee M12 HAMMERVAC Universal Dust Extractor Kit delivers HEPA-standard debris filtration at the lowest cost of ownership. The HAMMERVAC's universal handle system is compatible with major brands of SDS Plus rotary hammers and AC/DC hammer drills, so users can drill safely into concrete and masonry without purchasing a new drill. It features a certified HEPA filter that is replaced independently of the dust box, enabling users to maintain powerful suction at a low cost. In auto-on mode, the extractor turns itself on and off as you work for maximum productivity. Powered by an M12 Compact REDLITHIUM Battery, the HAMMERVAC provides filtration for up to 160 holes on a single charge. For even longer runtime, utilize the M12 XC High-Capacity REDLITHIUM battery. The kit includes an M12 Compact REDLITHIUM Battery and Charger, a HEPA filter, nozzle, 3 sidehandle clamping collar assemblies and a carrying case. Powerful dust extraction: Reduces the potential for silica dust inhalation by user. Universal handle system: Compatible with major brands of SDS Plus rotary hammers and AC/DC hammer drills. Replaceable certified HEPA filter: Provides high-quality debris filtration at lowest cost of ownership. REDLITHIUM Battery Technology: Superior pack construction, electronics, and performance deliver more work per charge and more work over pack life than any battery on the market. Versatile side handle: Can be tightened in multiple positions for work in tight spaces. Lightweight design: Minimizes fatigue in overhead and horizontal drilling applications. Includes: (1) M12 HAMMERVAC Universal Dust Extractor (Bare Tool) (2306-20). (2) M12 REDLITHIUM Battery (48-11-2401) (1) M12 Lithium-ion Battery Charger (48-59-2401). (1) Carrying Case. (1) HEPA Filter. (1) Nozzles. (3) Side Handle Clamping Collar Assemblies. M12 HammerVac Universal Dust Extractor Kit Does Not Contain Clearance Items 41
Milwaukee - Cordless - Power Tools Cordless - Dust Extractors Milwaukee 2715-DE M18 HammerVac Dedicated Dust Extractor M18 HammerVac Dedicated Dust Extractor Milwaukee HAMMERVAC Dedicated Dust Extractor (2715-DE) features an inline dedicated design engineered to connect directly to and be power by the M18 1-1/8" SDS Plus Rotary Hammer (2715-22). This design allows for a very compact HAMMERVAC and rotary hammer combination to fit in the most confined work spaces. Utilizing the same replaceable certified HEPA filter as other HAMMERVACS, which filter 99.97% of all particles greater than 0.3µm, means more compatibility on the jobsite. For accurate hole depths, this product is built with an adjustable depth stop and ruler for easy and precise adjustments. Featuring a high capacity dust box, users can now work longer without emptying dust box as often. FUEL Technology: Delivers faster than corded speed, corded durability, and all day work on one charge. POWERSTATE Brushless Motor: Provides 3.3 ft-lbs of impact energy, 0-1,350 RPM and 0-5,000 BPM. REDLITHIUM XC5.0 Battery Packs: Provide all day work on one charge, 20% more power and 2X more recharges than standard Lithium- Ion batteries. (Sold Separately). REDLINK PLUS Intelligence: Integrates full-circle communication between tool, battery and charger to protect from overloading, overheating, and over-discharging. AVS Anti-Vibration System: Minimizes vibration for maximum comfort MLT2715DE M18 HammerVac Dedicated Dust Extractor Milwaukee 48-03-3035 SDS Plus Dust Trap Shroud Milwaukee 48-03-3035 SDS Plus Dust Trap Shroud Clear sleeve which provides visibility when lining up the hole and during the drilling application. Keeps dust contained throughout the duration of the drilling process. Easily collapses and locks for storage. Compact and collapsible design is ideal for hard-to-reach places. Providing superior productivity to the user. Fits most rotary drills and does not require a vacuum. MLT48033035 SDS Plus Dust Trap Shroud Milwaukee 48-03-3235 SDS Dust Trap Sleeve MLT48033235 SDS+ DUST TRAP Sleeve - 48-03-3035 The Milwaukee SDS Plus DUST TRAP is the industry's first OSHA compliance solution without a vacuum, ideal for overhead drilling applications. The universal fit allows the DUST TRAP to work with all SDS Plus rotary hammers and SDS Plus drill bits up to an 8" length, including stop bits and other anchor installations tools. The clear sleeve allows visibility while the locking mechanism enables easy storage on the jobsite. The compact, collapsible design is ideal for tough to reach places, providing superior productivity. The DUST TRAP is OSHA objective data compliance solution when used without a vacuum and OSHA Table 1 compliant when used with a dust extractor, giving users the flexibility to adjust to the daily demands of the jobsite while being compliant. OSHA Compliance without a Vacuum. Universal Fit for SDS-Plus Rotary Hammers. Clear sleeve for maximum visibility and accuracy. OSHA Objective Data compliance without a dust extractor. OSHA Table 1 compliant with a dust extractor. Fits SDS Plus drill bits up to 8" overall length and works with stop bits. Compact, collapsible design ideal for accessibility and storage. SDS Replacement Dust Trap Sleeve Does Not Contain Clearance Items 42
Milwaukee - Cordless - Power Tools Cordless - Dust Extractors Milwaukee 8960-20 Dust Extractor Vacuum & Accessories M12 HAMMERVAC Universal Dust Extractor Kit 2306-22 The Milwaukee 8-Gallon Dust Extractor provides users with an OSHA-compliant solution for the regulation on respirable crystalline silica dust (29 CFR 1926.1153). An automatic filter cleaning mechanism helps maintain consistent airflow and suction at 148 CFM in tough dust-producing applications. The extractor's unique two step filtration system includes a 99.97% efficient HEPA filter as the final step, leading to cleaner air and a safer work environment. For added convenience, an on-board tool activated plug allows users to start and stop the vacuum with a power tool to increase productivity. The adapters inclunique two step filtration system includes a HEPA filter, which captures 99.97% of all particles greater than 0.3 microns or greater. On-board tool activated plug allows users to start and stop the vacuum with a power tool. Quiet operation: 69dB. Suction control dial for performance control. 13 Foot Anti-Static Hose. Large wheels, locking swivel casters for jobsite durability. Water level float valve shuts off suction when tank is full. Includes: (1) 8 Gallon Dust Extractor (8960-20). (1) Anti-Static Hose. (1) Dust Extractor Adapter. (1) Fleece Dust Bag. (1) HEPA Filter. (1) Hose Clip Adapter. (1) Hose Sleeve. (1) Main Filter. (1) Plastic Dust Bag (1) Power Tool Adapter MLT49901900 MLT49901959 Wet/Dry Pickup Cartridge Filter Hose Clip Adapter for 8-Gallon Dust Extractor (8960-20), (5317-DE), & (5318-DE) MLT5317DE SDS Max Dust Extraction Attachment for 8-Gallon Dust Extractor (8960-20) MLT5318DE SDS Max Chisel Boot for 8-Gallon Dust Extractor (8960-20) MLT896020 8 Gallon Dust Extractor Vacuum Cordless - Grease Guns Milwaukee 2446-21XC - M12 Grease Gun Milwaukee M12 Grease Gun - 2446-21XC Powerful 12V motor delivers over 8,000 PSI Max operating pressure. Dispenses up to 7 cartridges per charge. 14" long and 7.2 lbs. Integrated hose storage and LED fuel gauge. Air bleed valve: priming mechanism for quick flow. Includes 2446-20 Grease Gun, (1) M12 XC Lithium-ion Battery, 30-minute Charger, 36" Flex Hose with Spring Guard, Grease Coupler and Carrying Case MLT244621XC M12 Cordless Grease Gun w/ Lithium-Ion Battery and Charger Milwaukee 2646-22CT - M18 Grease Gun MLT264622CT M18 Cordless 2-Speed Grease Gun Kit The M18 Cordless 2-Speed Grease Gun delivers maximum pressure and unmatched versatility, offering an industry leading 10,000 PSI max operating pressure and a patent pending pre-set grease counter that allows service and maintenance professionals to dispense precise amounts of grease. The tool's 2-speed design offers users the ability to select between max pressure and max flow rate. Other unique features include an on-board LED light, a lock-on/lock-off trigger, and a plunger rod with markings to gauge how much grease is left in the barrel. The tool's stand up design and shoulder strap capability offer user convenience, while limiting fatigue and the 48" flexible hose offers greater accessibility when greasing hard to reach fittings. The new tool is also compatible with a clear barrel accessory (49-16-2646). Powered by an M18 REDLITHIUM Battery pack, this is the industry's only 18V grease gun that's battery is compatible with a system of tools. The kit includes the new multi-voltage charger, so you can charge all M12 and M18 lithium-ion batteries with one charger. Industry leading 10,000 PSI max operating pressure. Industry leading max flow-rate of up to 10 oz. / minute. New to world precision through Pre-set grease counter dial. 48" flexible hose offers greater access to difficult to reach fittings. Air bleeder valve for quick priming. M18 REDLITHIUM System: Compatible with over 40 M18 Lithium-Ion solutions for greater versatility in the workplace. Lock-on / Lock-off trigger delivers added user convenience. M18 Cordless 2-Speed Grease Gun Kit (2) Batteries Included Does Not Contain Clearance Items 43
Milwaukee - Cordless - Power Tools Cordless - Grinder Milwaukee 2680-22 M18V Cut-off/Grinder Milwaukee 2680-22 - M18 4-1/2" Cut-off / Grinder 4-Pole motor delivers maximum power when cutting or grinding. Features overload protection, debris baffles, burst resistant guard, large button spindle lock, and paddle switch design. Up to 35% faster cutting speed. Up to 50% more cuts on a single charge. 3-Position side handle provides optimal control and versatility. RPMs: 9,000. Tool Weight: 5.9 lbs. Includes 4-1/2" Cut-off Grinder, (2) 18V XC High Capacity Lithium-Ion Batteries, 1-hour Charger, Type 1 guard, Type 27 guard, Type 1 Cut-off Wheel, Spanner Wrench, Side Handle, and Contractor Bag. MLT268022 M18 Cordless 4-1/2" Cut-off/Grinder Kit Milwaukee 2780-20 M18 Fuel Grinder MLT278020 Milwaukee 2780-20 M18 Fuel Grinder The M18 FUEL 4-1/2" / 5" Grinder supplies maximum sustained power to complete the toughest grinding, surface preparation and cutting applications. The POWERSTATE Brushless Motor provides up to 10X longer motor life and lower cost of ownership. The M18 REDLITHIUM XC4.0 Battery Pack (not included) delivers up to 4X more run time and 20% more power. The grinder features REDLINK PLUS Intelligence, the most advanced system of cordless power tool electronics, for maximum performance. The 18-volt lithium-ion grinder s thin body design gives it optimized balance to rest easily in your hands. Tool-free accessory changes and guard adjustments mean less downtime during work. The grinder is built with the same tool body, gearing system and anti-vibration side handle as Milwaukee s legendary high-performance corded grinders for maximum durability on the job. Grinding wheel sold separately. M18 FUEL 4-1/2" - 5" Cordless Grinder, Paddle Switch No-Lock (Bare Tool) Milwaukee 2780-22 M18 Fuel Grinder Kit Milwaukee 2780-22 M18 FUEL Grinder Kit M18 FUEL cordless 4-1/2" / 5" Grinder with a Powerstate brushless motor delivers maximum power and up to 10X longer motor life. Redlink Plus Intelligence provides optimized performance, electronic clutch, and over load protection. Metal housing and gearing system. Switch Type: Paddle No-Lock. Tool free guard. Speed: 8,500 RPM. Includes: M18 FUEL Grinder (2780-20), (2) M18 Redlithium XC 4.0 Extended Capacity battery Packs, (1) M18 & M12 Multi-Voltage Charger, (1) Carrying Case, (1) Flange Nut, (1) Wheel Guard, (1) Spanner Wrench. Grinding wheel sold separately. MLT278022 M18 FUEL 4-1/2" - 5" Cordless Grinder Kit, Paddle Switch w/ 2 Battery Packs & Charger Cordless - Hedge Trimmers Milwaukee 2726-20 M18 Fuel Hedge Trimmers MLT272620 M18 FUEL Hedge Trimmer (Tool Only) The M18 FUEL Hedge Trimmer has the power to cut 3/4" branches, cuts up to 30% faster, and provides up to 2 hours of run-time per charge. Designed to meet landscape maintenance professional needs, the handle placement and weight distribution provide the best combination of balance and control. The trimmer features a slider crank mechanism and all metal gear case providing unmatched durability and longer life. The 24" blade trims more material in a single pass, increasing reach and productivity. The blade tip guard prevents damage to the property and the blades. The M18 FUEL Hedge Trimmer is fully compatible with 125+ solutions on them18 system. M18 FUEL Hedge Trimmer (Tool Only) 24" Blade Does Not Contain Clearance Items 44
Milwaukee - Cordless - Power Tools Cordless - Impact Drivers Milwaukee 2453-20 M12 Fuel Impact Driver Milwaukee M12 Fuel 1/4" Hex Impact Driver 2453-20 Powerstate brushless motor delivers up to 1,200 in-lbs of peak torque with maximum sustained torque to complete a variety of applications. Redlink Plus Intelligence provides optimized performance and overload protection. Drive Control: two fastening modes provide variable power and speed for precision work and heavy duty applications. No Load Speed: 0-2,650 RPM. No Load IPM: 0-3,550. Length: 6". Onboard fuel gauge. Built-in LED light. Belt clip included. Powered by the Redlithium 2.0 Compact Battery Pack (sold separately). MLT245320 M12 Fuel 1/4" Hex Impact Driver (Bare Tool Only) Milwaukee 2453-22 M12 Impact Driver Kit Milwaukee M12 Impact Driver Kit - 2453-22 The M12 FUEL 1/4" Hex Impact Driver Kit delivers maximum performance in a compact size. Powerstate brushless motor delivers up to 1,200 in-lbs of peak torque. REDLITHIUM 2.0 compact battery pack delivers up to 20% more power and 2X more recharges than standard lithium-ion batteries. One-handed bit insertion allows for fast and easy bit changes. Built-in LED light. On-board fuel gauge. Two fastening modes provide variable power and speed. Kit Includes: Impact Driver, (2) 2.0 Compact Battery Packs, (1) M12 Lithium-ion Battery Charger, Belt Clip and Carrying Case. MLT245322 M12 1/4" Hex Impact Driver Kit w/ 2 Battery Packs & 1 Charger Milwaukee 2462-20 M12 Impact Driver Milwaukee M12 1/4" Hex Impact Driver 2462-20 Milwaukee Impact Mechanism delivers 1,000 in-lbs of toque. No Load RPM: 0-2,500. No Load IPM: 0-3,300. Length: 6-1/2". Weight: 1.9lbs. New ergonomic handle design for increased comfort. On-board battery fuel gauge. LED light. Belt clip included. M12 Redlithium Battery not included. MLT246220 M12 1/4" Hex Impact Driver (Bare Tool Only) Milwaukee 2462-22 M12 Impact Driver Kit MLT246222 Milwaukee M12 Impact Driver Kit - 2462-22 The M12 Cordless 1/4" Hex Impact Driver delivers unmatched fastening performance in a lightweight portable design. Delivers 1,000 in-lbs of torque. 0-2,500 RPM for increased fastening speed. New ergonomic handle design for increased comfort. On-board battery fuel gauge. Built-in LED light. 6-1/2" Length. Kit includes: Impact Driver, (2) M12 REDLITHIUM batteries, (1) Lithium-ion Battery Charger, Belt Clip and Carrying Case. M12 1/4" Hex Impact Driver Kit w/ 2 Battery Packs and 1 Charger Milwaukee 2657-22 M18 Impact Driver Kit Milwaukee M18 2-Speed Impact Driver Kit - 2657-22 The M18 2-Speed, 1/4" Hex, Impact Driver Kit features a 4-pole frameless motor and optimized impact mechanism. Delivers up to 2,750 RPM, 3,450 IPM and 1,500 in-lbs of fastening torque. Offers multiple speed/torque modes through proprietary 2-mode drive control. REDLINK Intelligence provides optimized performance and overload protection. LED light to illuminate work surface. 1/4" hex quick-connect chuck. Length: 5-1/2". Includes M18 Impact Driver, M18 REDLITHIUM EX Extended Capacity Battery, M18 & M12 Multi-Voltage Charger, Belt Clip, and Carrying Case. MLT265722 M18 1/4" Hex Impact Driver Kit, 2-Speed, w/ 2 Batteries & 1 Charger Does Not Contain Clearance Items 45
Milwaukee - Cordless - Power Tools Cordless - Impact Drivers Milwaukee 2662-22 18V Impact Wrench Kit Milwaukee M18 High Torque Impact Wrench w/pin Detect Kit, 2662-22 Impact mechanism delivers 450 ft-lbs of torque. Size: 8-7/8"L - Wt. 5.2 lbs. 4-Pole frameless motor delivers maximum runtime. 1/2" anvil w/pin detent provides maximum socket retention. Variable speed trigger provides speed conrol between 0-1900 RPM & 0-2200 IMP. Kit includes (2) XC High capacity Lithium-ION batteries and Kitbox. MLT266222 M18 Impact Wrench w/pin Detent Kit w/ 2 Batteries Milwaukee 2753-20 M18 FUEL 1/4" Hex Impact Driver Milwaukee M18 Fuel 1/4" Hex Impact Driver Milwaukee M18 Fuel, 1/4" Hex Impact Driver, Cordless, 18V, LED light, 1800 in-lbs. of Torque MLT275320 M18 Fuel 1/4 Hex Impact Driver Milwaukee 2753-22 M18 FUEL Impact Driver Kit Milwaukee M18 FUEL Impact Driver Kit - 2753-22 The M18 FUEL, 1/4" Hex, Impact Driver Kit features a POWERSTATE Brushless Motor. 4- Mode DRIVE CONTROL. Delivers up to 3,000 RPM, 3,700 IPM and 1,800 in-lbs of fastening torque. REDLINK PLUS Intelligence provides optimized performance and overload protection. LED light to illuminate work surface. 1/4" hex quick-connect chuck. Self-Tapping Screw Mode. Length: 5-1/4". Includes M18 FUEL Impact Driver, M18 REDLITHIUM XC5.0 Extended Capacity Battery, M18 & M12 Multi-Voltage Charger, Belt Clip, and Carrying Case. MLT275322 M18 FUEL 1/4" Hex Impact Driver Milwaukee 2754-22 M18 FUEL Compact Impact Wrench Kit MLT275422 Milwaukee 2897-22 M18 FUEL 1/2" Hammer Drill Driver & 1/4" Hex Impact Driver Kit. Includes the M18 FUEL Hammer Drill (2704-20), the Most Powerful 18-volt cordless drill on the market. Includes the M18 FUEL 1/4" Hex Impact Driver (2753-20), the Most Powerful Impact Driver in its class. M18 FUEL features the most advanced cordless technology available. POWERSTATE Brushless Motor. REDLINK PLUS Electronic Intelligence. REDLITHIUM Battery Technology, resulting in longer motor life, more run time, and more power. M18 FUEL 3/8" Compact Impact Wrench w/ Friction Ring Kit Does Not Contain Clearance Items 46
Milwaukee - Cordless - Power Tools Cordless - Impact Drivers Milwaukee 2755B-20 M18 Impact Driver M18 FUEL 1/2" Compact Impact Wrench w/ Friction Ring (Bare Tool) The M18 FUEL 1/2" Compact Impact Wrench w/ Friction Ring is the Most Powerful tool in its class by delivering up to 220 ft-lbs of torque in a compact design. The POWERSTATE Brushless Motor not only provides unmatched power, but also provides greater efficiency, delivering up to 25% more run-time than the leading competitors. REDLINK PLUS Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. REDLITHIUM Batteries (not included) deliver more work per charge and more work over the life of the pack than competitive batteries on the market.the 4-Mode DRIVE CONTROL provides greater control over output speed and power for greater versatility by delivering 0-900 RPM in Mode 1, 0-1600 RPM in Mode 2, and 0-2500 RPM in Mode 3. Auto Shut-Off Mode intelligently detects when the tool has impacted on a fastener for one second and automatically shuts the tool down, reducing the likelihood of overdriving and damaging materials. POWERSTATE Brushless Motor delivers 220 ft-lbs. of fastening torque. REDLINK PLUS Intelligence prevents damage to the tool and battery due to overloading or overheating. REDLITHIUM Batteries deliver more work per charge and more work over the life of the battery. 4-Mode DRIVE CONTROL provides greater control over output speed and power. Utilizes a Friction Ring design to ensure quick & easy socket changes. MLT2755B20 M18 FUEL 1/2" Compact Impact Wrench w/ Friction Ring (Bare Tool) Milwaukee 2760-22 M18 Fuel Surge Impact Driver Kit MLT276022 Milwaukee 2760-22 M18 Fuel Surge Impact Driver Kit The M18 FUEL SURGE 1/4 in. Hex Hydraulic Impact Driver is the quietest cordless fastening solution on the market. With Milwaukee's new FLUID-DRIVE Hydraulic Powertrain, users will experience up to 50uieter operation, 3X less vibration for smoother operation, and faster driving speeds compared to standard impacts. The POWERSTATE Brushless Motor delivers up to 0-3,000 RPM with constant power output to drive screws faster. REDLINK PLUS Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM Compact Batteries or Extended Capacity Batteries (sold separately), which deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4-Mode DRIVE CONTROL provides greater control over output speed and power for greater versatility. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws. Features: FLUID-DRIVE Hydraulic Powertrain reduces metal on metal contact within the tool, delivering quieter operation, smoother performance, and increased durability over a standard impact. POWERSTATE brushless motor outperforms all leading competitors. REDLINK PLUS intelligence prevents damage to the tool and battery due to overloading or overheating. REDLITHIUM batteries deliver more work per charge and more work over the life of the battery. 4-mode drive control provides greater control over output speed and power Includes: M18 18V 5.0 Ah FUEL SURGE 1/4 in. Hex Hydraulic Impact Driver Kit - 2760-22, (2) REDLITHIUM XC 5.0 Ah Extended Capacity Battery Packs - 48-11-1850, Belt Clip, Bit Holder, Multi-Voltage Charger, & Carrying Case M18 Fuel Surge 1/4" Hex Hydraulic Impact Driver w/ 2 Battery Packs & 1 Charger Milwaukee 2763-22 M18 Impact Wrench Kit MLT276322 Milwaukee M18 FUEL 1/2" High Torque Impact Wrench w/ Friction Ring Kit 2763-22 Superior performance, delivers up to 700 ft-lbs of maximum fastening torque, up to 1,100 ft-lbs of nut-busting torque and up to 2X more runtime. Powerstate Brushless Motor outpowers competitors yet runs cooler with no wearable components. REDLINK PLUS Intelligence allows operator to choose between 2 fastening modes. Torque: 100 ft-lbs (Mode 1) and 700 ftlbs (Mode 2). REDLITHIUM XC 4.0 Battery Pack provides superior performance and delivers 2X more runtime. 1/2" Anvil with friction ring for fast, easy socket changes. Variable speed trigger. LED light. Electric brake. On board fuel gauge. Includes M18 Impact Wrench w/ Friction Ring, (2)M18 REDLITHIUM XC 4.0 Battery Packs, (1) M18 & M12 Multi-Voltage Charger and Carrying Case. M18 FUEL 1/2" High Torque Impact Wrench w/friction Ring Kit, 2-Batteries & Charger Does Not Contain Clearance Items 47
Milwaukee - Cordless - Power Tools Cordless - Impact Drivers Milwaukee 2765-20 M12 Fuel Impact Driver M18 FUEL 7/16" Hex Utility Impacting Drill (Bare Tool) The most powerful cordless Utility Impacting Drill in its class. The M18 FUEL 7/16" Hex Utility Impacting Drill the delivers up to 500 ft-lbs of maximum fastening torque, up to 2X more runtime and up to 3X longer motor life. The POWERSTATE Brushless Motor outperforms competitors with constant power output and the Milwaukee designed impact mechanism delivers up to 500 ft-lbs of maximum fastening torque. The REDLITHIUM XC5.0 Extended Capacity Battery Pack (not included) delivers more work per charge and more work over pack life than any other battery. It features an onboard fuel gauge to help you monitor the charge more accurately, so there's less downtime on the job. REDLINK PLUS Intelligence allows the operator to choose between 2 fastening modes with Milwaukee's proprietary DRIVE CONTROL feature and ensures maximum performance and protection from overload, overheating and over-discharge. The 18-volt lithium-ion FUEL 7/16" Hex Utility Impacting Drill offers you fast, secure insertion and removal of 7/16" auger bits and socket adaptors. MLT276520 M18 Fuel 7/16" Hex Impact Driver (Bare Tool Only) Milwaukee 2767-20 M18 High Torque Impact Driver M18 High Torque Impact Driver w/ Friction Ring- 2767 The 2767 M18 FUEL High Torque 1/2" Impact Wrench with Friction Ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day. By providing the industry's most compact cordless High Torque Impact Wrench at 8.39" length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL with Bolt Removal mode gives users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose. This tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive MLT276720 M18 Fuel 1/2" Hex Impact Driver w/ Friction Ring Milwaukee 2767-22 M18 High Torque Impact Driver MLT276722 M18 FUEL High Torque 1/2" Impact Wrench with Friction Ring Kit The 2767 M18 FUEL High Torque 1/2" Impact Wrench with Friction Ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day. By providing the industry's most compact cordless High Torque Impact Wrench at 8.39" in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL with Bolt Removal mode gives users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose. This tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials. M18 Fuel High Torque 1/2" Hex Impact Wrench w/ Friction Ring Kit Milwaukee Shockwave Impact Adapters Milwaukee Shockwave Adapters Heavy duty construction for fastening capabilites in all impacts. Made of proprietary steel and heat treated to control hardness. MLT48034405 MLT48034410 MLT48325031 Shockwave Socket Adapter, 3/8" Square Input Drive to 1/4" Hex Output Drive Shockwave Socket Adapter, 1/2" Square Input Drive to 1/4" Hex Output Drive Shockwave Socket Adapter, 1/4" Hex Input Drive to 3/8" Square Output Drive Does Not Contain Clearance Items 48
Milwaukee - Cordless - Power Tools Cordless - Inflator Milwaukee 2475-20 Compact Inflator Milwaukee M12 Compact Inflator - 2475-20 FASTEST CORDLESS TIRE INFLATOR. The Milwaukee M12 Compact Inflator delivers fast, accurate, easy inflation with the portability to take anywhere. With the capability to complete demanding applications like car, LT truck, and compact equipment tires, the M12 Compact Inflator gives users ultimate power and efficiency. Rated to deliver over 120PSI, The high efficiency motor and pump top-off car tires in under 1 minute. The TrueFill Auto shut-off technology delivers highly accurate pressure, protects from overfill, and automatically senses speed of fill to deliver precise shut-off at the desired PSI. Additionally, the unit includes a large easy to read back-lit LCD, anti-vibration feet, and 26" inch hose with an all brass Schrader chuck. Fastest Cordless Tire Inflator: Top-off a car tire in under 1 minutes. (28-35 PSI). Inflates car, LT truck, and compact equipment tires. REDLINK Intelligence: TrueFill Auto Shut-off technology increases accuracy, protects from over-temp and over-fill. High efficiency pump and motor for true 120 PSI capability. Illuminated digital gauge with target and current pressure reading. Top off a car tire in under 1 minutes 28-35 psi, fills a LT truck tire in under 4 minutes 30-45 psi. Compact, portable, and easy-to-store in any car or truck. Weather and impact resistant with a reinforced cage. Antivibration feet for no tool movement while running. 3-year warranty. Includes: 2475-20 M12 Compact Inflator Ball Inflation Needle, Presta Chuck, Schrader Chuck, Inflator Nozzle. Compatible with all M12 batteries. Includes: (1) Ball Inflation Needle. (1) Presta Chuck. (1) Schrader Chuck. (1) Inflator Nozzle. MLT247520 Cordless - Knockouts M12 Compact Inflator (Tool Only) Milwaukee 2676-22 M18 Knockout Kit 1/2-2 MLT267622 Milwaukee M18 Knockout 1/2" to 2" Kit - 2676-22 The M18 Force Logic High Capacity Knockout Kit is powerful enough to punch 4" holes in 12 gauge stainless steel. Quick connect alignment systems allows for easy set-up without the tool. Exact 1/2" - 2" punches and dies with cross-hairs for accurate holemaking. Compatible with competitive accessories. Includes M18 Knockout Tool, (2) M18 Redlithium XC Extended Capacity Batteries, (1) M18 & M12 Multi-Voltage Charger, (1 Each) Exact 1/2" Stainless Steel Die and Punch, (1 Each) Exact 3/4", 1", 1-1/4", 1-1/2", 2" Die and Punch, (1 Each) 7/16" and 3/4" Draw Stud, (1) Ball Stud, (1) Coupler, (1) Quick Connect Collar and (1) Carrying Case. M18 Force Logic High Capacity Knockout Kit, 1/2" to 2", w/ 2-Batteries & Charger Milwaukee 2676-23 M18 Knockout Kit 1/2-4 MLT267623 Milwaukee M18 Knockout 1/2" to 4" Kit - 2676-23 The M18 Force Logic High Capacity Knockout Kit is powerful enough to punch 4" holes in 12 gauge stainless steel. Quick connect alignment systems allows for easy set-up without the tool. Exact 1/2" - 4" punches and dies with cross-hairs for accurate holemaking. Compatible with competitive accessories. Includes M18 Knockout Tool, (2) M18 Redlithium XC Extended Capacity Batteries, (1) M18 & M12 Multi-Voltage Charger, (1) 1-1/8" Draw Stud, (1 Each) Exact 1/2" Stainless Steel Die and Punch, (1 Each) Exact 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 3-1/2", 4" Die and Punch, (1 Each) 7/16" and 3/4" Draw Stud, (1) Ball Stud, (1) Coupler, (1) Quick Connect Collar and (1) Carrying Case. Cordless - Multi Tools M18 Force Logic high Capacity Knockout Kit, 1/2" to 4", w/ 2 Batteries & Charger Cordless - Multi Tools 2426-22 Milwaukee 2426-22 - M12 Cordless Multi-Tool Kit 12V Oscilalting tool is the ideal multi-use tool for a variety of jobs with excellent speed, durability and control. Cuts, sands, grinds and scrapes. Compatibility adapter accepts most competitor's accessories. All metal gear case. Metal interface with 8 cogs provides a 360 rotation for easy adaption to various projects. 12 speed settings. Oscillations per minute: 5,000-20,000. Includes: (1) M12 Multi-Tool, (1) adapter, (1) wood cutting blade, (1) sanding pad, (5) assorted sanding sheets, (2) M12 REDLITHIUM batteries, (1) 30 minute charger, and (1) contractor bag MLT242622 M12V Cordless Multi-Tool Kit, Cuts, Sands, Grinds & Scrapes Does Not Contain Clearance Items 49
Milwaukee - Cordless - Power Tools Cordless - Multi Tools Cordless - Multi Tools 2626-22 M18 Cordless LITHIUM-ION Multi-Tool Kit The Milwaukee M18 Cordless Multi-Tool Kit cuts up to 50% faster and delivers up to 2X more cuts per charge than the competitors. With best-in-class speed and performance, the cordless Multi-Tool offers the versatility to complete problematic jobsite applications. Ideal for remodelers, flooring contractors, maintenance repair technicians and electricians, the cordless Multi-Tool cuts, grinds, sands and scrapes at odd angles and in areas difficult to work. It's powered by the M18 REDLITHIUM Battery to deliver up to 40% more runtime. Use it to make flush or plunge cuts, remove grout, sand in corners and tackle other awkward jobs. The M18 Multi-Tool's Constant Power Technology maintains blade speed for faster cutting during heavy applications. The 12-setting dial allows users to match the speed to the application. With the universal adapter (included), the Multi-Tool is compatible with most competitor accessories. The kit includes an M12 XC High Capacity REDLITHIUM Battery Pack, an M18 & M12 Multi-Voltage Charger, 5 assorted sanding sheets, sanding pad, wood cutting blade and contractor bag. Powerful motor: Delivers 11,000 to 18,000 OPM. REDLITHIUM Battery Technology: Superior pack construction, electronics, and performance deliver more work per charge and more work over pack life than any battery on the market. All-metal gear case: Provides added jobsite durability. Tool-free blade change: Offers faster changes and no tools to misplace. Built-in LED light: Illuminates dark work spaces. MLT262622 M18V Cordless Multi-Tool Kit, Cuts, Sands, Grinds & Scrapes Cordless - Multi Tools 48-90-1009 Multi-Tool Blade Kit Assembled in the USA with Global Materials and designed with a Universal Shank, Milwaukee Multi-Tool Blades are compatible with most professional grade oscillating multi-tools. This 9 piece blade set features an assortment of our most popular multi-tool blades for a broad range of professional applications. Featuring (2) 3/4" Fine Tooth blades for detail applications in wood and hardwood, (1) 1-1/4" Japanese Tooth Blade for aggressive cuts in wood and hardwood, (2) 1-1/4" Hard Point blades for added durability in wood and hardwood, (1) 2-1/2" Segmented Carbide Grit blade for grout removal and cuts in abrasive materials, (1) 3-1/8" Segmented blade for fiberglass, non-ferrous metals, and drywall and (2) 2-1/2" Bi-Metal blades for extended life in a variety of demanding applications such as wood with nails and non-ferrous metals. This set also includes a jobsite durable case for convenient blade storage. Includes a variety of multi-tool blades for a broad range of applications. Jobsite durable case for convenient storage. Made in USA with US and Foreign Components Universal Shank. Compatibility with Most Professional Grade Multi-Tool Brands: Milwaukee, Bosch (Non- Starlock), SKIL, Makita, Craftsman, Fein(Non-Starlock), Ridgid, AEG, Ozito, Ryobi. Adaptor (48-90-0000) available for Porter Cable, Black & Decker, and DeWalt Multi-Tools. All Brands are registered trademarks of their respective owners. MLT48901009 9 PC - Multi-Tool Blade Kit Cordless - Nailer Milwaukee Milwaukee 2458-21 12V Palm Nailer Kit MLT245821 Milwaukee 2458-21 M12 Palm Nailer Kit The 12V Palm Nailer provides a portable solution to professional nailing applications without the hassle of an air compressor or hose. 6D - 16D Magnetic Collet securely holds framing nails for one-handed use. All metal gear housing. Palm style ergonomics delivers superior comfort and control. Delivers 2.2 ft/lbs of blow energy. 2700 BPM. LED light. Onboard fuel gauge. Works with both M12 batteries and 25+ M12 tools. Includes: 2458-20 Palm Nailer, M12 REDLITHIUM Battery, 30 Minute Charger, Hand Strap, and Tool Bag. M12V Cordless Palm Nailer Kit, Magnetic Tip, w/ Battery & Charger Does Not Contain Clearance Items 50
Milwaukee - Cordless - Power Tools Cordless - Rotary Hammers Milwaukee 2605-20 M18 Rotary Hammer Milwaukee M18 Cordless SDS-Plus Rotary Hammer 2605-20 Powerful 18-volt motor delivers 0-1,400 RPM, 0-4,800 BPM and up to 40% more runtime than the competition. 1.4 Ft-lbs of torque. 3-Mode operation: Choose rotary hammer, hammer only and rotation only for added versatility. Mechanical clutch protects the motor when the bit binds. Variable position chisel stop. AVS anti-vibration system minimizes vibration for maximum comfort. Solid bit capacity: 7/8". Thin wall core bit capacity: 2-1/8". 1-hour charge time. Length: 11-3/4". Includes: Rotary Hammer, Depth Rod and Side Handle (REDLITHIUM Battery sold separately) MLT260520 M18-7/8" - SDS-Plus Rotary Hammer Cordless, 18V, 1,400 RPM (Bare Tool) Milwaukee 2605-22 M18 Rotary Hammer Kit MLT260522 Milwaukee Cordless Rotary Hammer Kit M18 Cordless Lithium-Ion 7/8" SDS-Plus Rotary Hammer Kit. Powerful 18-volt motor delivers 0-1,400 RPM, 0-4,800 BPM and up to 40% more runtime than the competition. 1.8 Ft-lbs of torque. 3-Mode operation: rotary hammer, hammer only and rotation only. Mechanical clutch protects the motor when the bit binds. Variable position chisel stop. AVS antivibration system minimizes vibration for maximum comfort. Solid bit capacity: 7/8". 1-hour charge time. Includes: Rotary Hammer, M18 XC High Capacity REDLITHIUM Battery, M18 & M12 Multi-Voltage Charger, Carrying Case, Depth Rod and Side Handle. M18-7/8" - SDS-Plus Rotary Hammer Cordless Kit, 18V, 1,400 RPM Milwaukee 2712-20 M18 Rotary Hammer Milwaukee M18 FUEL Rotary Hammer - 2712-20 Cordless M18 FUEL 1" SDS Plus Rotary Hammer (bare tool). Includes Depth Rod and side handle. Powerstate brushless motor provides 1.7 ft-lbs of impact energy, 0-1,400 RPM and 0-4,900 BPM. RedLithium XC 4.0 Battery Pack (sold separately) provides all day work on one charge. RedLink Plus intelligence protects from overloading, overheating and over-discharging. AVS anti-vibration system minimizes vibration for maximum comfort. Voltage: 18V. Length: 12.48". Solid Bit Capacity: 1". Thin Wall Core Bit Capcacity: 2-1/2". 3 Drilling Modes: Rotary Hammer, hammer Only, Rotation Only. Handle Style: Drop Motor. MLT271220 M18-1" - SDS-Plus Rotary Hammer Cordless, 18V, 1,400 RPM (Bare Tool) Milwaukee 2712-22 M18 Rotary Hammer Kit MLT271222 Milwaukee Cordless Rotary Hammer Kit - 2712-22 M18 Fuel Cordless 1" SDS Plus Rotary Hammer Kit delivers faster than corded speed, corded durability, and all day work on one charge. Powerstate brushless motor provides 1.7 ft-lbs of impact energy, 0-1,400 RPM and 0-4,900 BPM. Redlink Plus intelligence protects tool and battery from overloading and over-discharging. Solid Bit Capacity: 1". Thin Wall Core Bit Capacity: 2-1/2". 3-Mode: Rotary Hammer, Hammer Only, Rotation Only. Weight: 8.5 lbs. Length: 12.48". Kit includes (1) Rotary Hammer, (2) M18 Redlithium XC 4.0 Extended Capacity Battery Packs, (1) M18 & M12 Multi-Voltage Charger, (1) Depth Rod, (1) Side Handle and (1) Carrying Case. M18-1" - SDS-Plus Rotary Hammer Cordless Kit, 18V, 1,400 RPM Milwaukee 2715-20 M18 Rotary Hammer Milwaukee Cordless Rotary Hammer Kit - 2712-22 M18 Fuel Cordless 1" SDS Plus Rotary Hammer Kit delivers faster than corded speed, corded durability, and all day work on one charge. Powerstate brushless motor provides 1.7 ft-lbs of impact energy, 0-1,400 RPM and 0-4,900 BPM. Redlink Plus intelligence protects tool and battery from overloading and over-discharging. Solid Bit Capacity: 1". Thin Wall Core Bit Capacity: 2-1/2". 3-Mode: Rotary Hammer, Hammer Only, Rotation Only. Weight: 8.5 lbs. Length: 12.48". Kit includes (1) Rotary Hammer, (2) M18 Redlithium XC 4.0 Extended Capacity Battery Packs, (1) M18 & M12 Multi-Voltage Charger, (1) Depth Rod, (1) Side Handle and (1) Carrying Case. MLT271520 M18-1-1/8" - SDS-Plus Rotary Hammer Cordless, 18V, 1,350 RPM (Bare Tool) Does Not Contain Clearance Items 51
Milwaukee - Cordless - Power Tools Cordless - Rotary Hammers Milwaukee 2715-22 M18 Rotary Hammer Kit MLT271522 Milwaukee Cordless Rotary Hammer Kit - 2715-22 M18 Fuel Cordless 1-1/8" SDS Plus Rotary Hammer Kit delivers faster than corded speed, corded durability and all day work on one charge. Powerstate brushless motor provides 3.3 ft-lbs of impact energy, 0-1,350 RPM and 0-5,000 BPM. Redlink Plus intelligence protects tool and battery from overloading and overcharging. AVS Anti-Vibration system minimizes vibration. Solid Bit Capacity: 1-1/8". Thin Wall Core Bit Capacity: 3". 3-Mode: Rotary Hammer, Hammer Only, Rotation Only. Weight: 7.7 lbs. Length: 12.8". Kit includes (1) Rotary Hammer, (2) M18 Redlithium XC 4.0 Extended Capacity Battery Packs, (1) M18 & M12 Multi-Voltage Charger, (1) Depth Rod, (1) Side Handle, (1) Carrying Case. M18-1-1/8" - SDS-Plus Rotary Hammer Cordless Kit, 18V, 1,350 RPM Milwaukee 2717-22HD M18 Rotary Hammer Kit Milwaukee 2717-22HD M18 Rotary Hammer Kit The M18 FUEL 1-9/16" SDS Max Rotary Hammer is the first to world 18V SDS Max cordless solution. By utilizing proprietary M18 and FUEL technologies, the 1-9/16" SDS Max rotary hammer is able to drill as fast as a corded SDS Max rotary hammers, deliver corded durability, and provide over 20 minutes of continuous chipping. POWERSTATE Brushless Motor delivers 5 ft-lbs of impact energy for the more demanding, heavy-duty applications. Including dry coring and medium duty chipping in both concrete block and reinforced concrete. Powered by the new M18 REDLITHIUM. HIGH DEMAND 9.0 battery pack which delivers up to 5X more run-time, 35% more power and runs 60% cooler than standard lithium-ion batteries, the 1-9/16" SDS Max rotary hammer delivers over 20 minutes of continuous chipping. It also includes REDLINK PLUS Intelligence, the most advanced electronic system on the market, to prevent damage to the tool and battery from overloading and overheating. The M18 FUEL 1-9/16 SDS Max Rotary Hammer is part of Milwaukee 's complete cordless rotary hammer solution, ranging from Compact SDS Plus to SDS Max, all powered by the M18 REDLITHIUM battery system. MLT271722HD M18-1-9/16" - SDS-Plus Rotary Hammer Cordless Kit, 18V, 450 RPM Cordless - Saws Band Saw Kit Milwaukee M18 2629-22 MLT262922 Milwaukee M18 Band Saw Kit - 2629-22 At only 10-1/4lbs and 18" in length, the M18 Cordless LITHIUM-ION Band Saw Kit is the perfect tool for cutting metal inplace, overhead or in tight spaces. With 3-1/4" cut capacity and low vibration, this saw delivers the cleanest cuts on the most common materials including strut, 2-1/2" conduit, 3" angle iron, 3" copper and threaded rod without ruining the threads. The M18 Cordless LITHIUM-ION Band Saw Kit also features a work light, blade ejection system and a tool-free adjustable material guide that allows the user to make cuts flush to ceilings or walls. Features: 45% Lighter than Deep Cut - 10.25 Lbs compact light weight design for cutting overhead and in tight places. 3-1/4" Cut Capacity - cuts most common materials for Electrician, Plumber and Mechanical cutting applications. Single pass cut on 3" copper, 3" angle iron, 2-1/2" conduit. Tool-Free Adjustable Material Shoe - quickly adjusts the shoe and allows flush cuts when working with installed materials against walls and ceilings. LED Work Light - illuminates the cut line in dark areas. Blade Ejection System-Quickly change the blade by moving the material guide into the up position and depressing the blade ejection button. Drop Resistant Pulley Guard-Engineered geometries & high impact polymer. Cast Aluminum Gear Case-Withstands jobsite abuse & maintains gear positioning. M18 Cordless LITHIUM-ION Band Saw Kit Band Saw Kit Milwaukee M18 2729-22 Milwaukee M18 Fuel Deep Cut Band Saw Kit - 2729-22 Utilizing a Powerstate Brushless motor and Constant Power Technology the M18 Fuel Deep Cut Band Saw cuts faster than its corded counterparts. Over 90% same parts as Milwaukee's corded deep cut band saw. Delivers up to 2X more run time than other cordless options. REDLINK PLUS intelligence provides optimized performance and overload protection. 0-380 SFPM. All metal direct drive. Capacity: 5" x 5". Keyless adjustable shoe. LED light and hang hook. Includes M18 Fuel Deep Cut Band Saw, (2) M18 REDLITHIUM XC 4.0 Extended Capacity Battery Packs, M18 & M12 Multi-Voltage Charger, Blade and Carrying Case MLT272922 M18 FUEL Deep Cut Band Saw Kit Does Not Contain Clearance Items 52
Milwaukee - Cordless - Power Tools Cordless - Saws Band Saw Milwaukee M12 2429-20 Milwaukee M12 Cordless Sub-Compact Band Saw 2429-20 The Milwaukee 2429-20 M12 Sub-Compact Band Saw is the most compact and lightest weight cordless band saw on the market. At less than half the weight and size compared to a traditional deep cut band saw, the M12 Band Saw provides one-handed power and portability to electricians, maintenance professionals, and other users cutting small diameter materials. The M12 Band Saw weighs only 6.75 lbs and 12" in length, making it ideal for overhead or one-handed cutting applications. This powerful saw can cut through 3/4" EMT in only 3 seconds, and will get over 150 cuts per charge with the M12 REDLITHIUM XC High Capacity battery. With a 1-5/8" x 1-5/8" cut capacity and low vibration, the M12 Band Saw performs clean cuts on the most common small diameter metal cutting applications. The M12 Band Saw also features a dual-latching lower guard that covers the blade outside the active cutting area, addressing OSHA guarding requirements and making the tool suitable for one-handed use. The tool also includes a variable speed trigger, and LED light. Backed by Milwaukee's 5-year warranty the 2429-20 M12 Band Saw Bare Tool comes equipped with (1) 18 TPI metal cutting blade. Battery and charger are sold separately with this model. The M12 Sub-Compact Cordless band saw should be used only with Milwaukee 48-39-0572 Sub-Compact Portable Band Saw Blades. MLT242920 M12 Sub-Compact Band Saw (Bare Tool) Band Saw Milwaukee M18 2629-20 Milwaukee 2629-20 M18 Cordless Band Saw At only 10-1/4lbs and 18" in length, the M18 Cordless LITHIUM-ION Band Saw is the perfect tool for cutting metal in-place, overhead or in tight spaces. With 3-1/4" cut capacity and low vibration, this saw delivers the cleanest cuts on the most common materials including strut, 2-1/2" conduit, 3" angle iron, 3" copper and threaded rod without ruining the threads. The M18 Cordless LITHIUM-ION Band Saw also features a work light, blade ejection system and a tool-free adjustable material guide that allows the user to make cuts flush to ceilings or walls. MLT262920 M18 Band Saw (Bare Tool) Band Saw Milwaukee M18 2729-20 MLT272920 M18 FUEL Deep Cut Band Saw (Bare Tool) The M18 FUEL Band Saw cuts faster than its corded counterparts, provides the same legendary durability of a Milwaukee corded band saw and delivers up to 2X more run time than other cordless options. Utilizing a POWERSTATE Brushless motor and Constant Power Technology, the M18 FUEL Deep Cut Band Saw cuts faster than corded band saws. It also delivers the same legendary durability that has made Milwaukee Corded Deep Cut Band Saws second to none for decades by utilizing over 90% of the same parts. Equipped with Jobsite Armor Technology, the tool is better protected from drops and debris with a proprietary composite material and crush zone barriers to absorb impacts. REDLITHIUM XC5.0 Battery Technology provides up to 2.5X more run-time through superior pack construction, electronics, and more work per charge over the life of the battery than any competitive lithium-ion battery on the market. REDLINK PLUS Intelligence has the most advanced system of cordless power tool electronics, providing optimized performance, electronic clutch, and overload protection using total system communication between tool, battery and charger. The M18 FUEL Deep Cut Band Saw features a tool-free locking adjustable shoe that can adjust from an extended shoe to no shoe in seconds. Other innovative features include a hang hook for easy storage in-between cuts, LED light to illuminate the cutting area, superior cut visibility, and a balanced body design that allows the tool to rest naturally and comfortably in the user's hands. M18 FUEL Deep Cut Band Saw (Bare Tool) Does Not Contain Clearance Items 53
Milwaukee - Cordless - Power Tools Cordless - Saws Circular Saw Kit Milwaukee M18 2730-21 M18 FUEL 6-1/2" Circular Saw Kit The M18 FUEL 6-1/2" Circular Saw Kit features the fastest saw in its class, offering up to 30% faster cutting, 2X more runtime and 3X longer tool life than competitive saws. The POWERSTATE Brushless Motor outpowers all other 18-Volt cordless circular saws and allows you to perform jobs that previously required a corded tool. The M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack delivers up to 2.5X more runtime and provides more work per charge and more work over the life of the pack than competitive batteries. The saw's REDLINK PLUS Intelligence ensures optimized performance and protection from overloading, overheating and over-discharging. The 18-volt lithium-ion circular saw's guards and shoe are built of cast magnesium to provide a durable, lightweight base. The saw also features an integrated LED light and a rafter hook for convenient storage on the job. The kit includes an M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack, a multi-voltage charger, a carrying case, a blade wrench, and blade. MLT273021 M18 FUEL 6-1/2" Circular Saw Kit Circular Saw Kit Milwaukee M18 2731-21 M18 FUEL 7-1/4" Circular Saw Kit The M18 FUEL 7-1/4" Circular Saw Cuts Faster and Weighs up to 40% less than corded saws while delivering up to 300 cuts per charge. Utilizing a POWERSTATE brushless motor the M18 FUEL 7-1/4" Circular Saw cuts faster than corded counterparts. Weighing in at only 9 lbs with battery pack, the saw is up to 40% lighter than competitive corded circular saws, without sacrificing cut depth or performance. REDLINK PLUS Intelligence has the most advanced system of cordless power tool electronics, providing optimized performance and overload protection by using total system communication between tool, battery and charger. REDLITHIUM XC5.0 Battery Technology provides up to 300 cuts per charge with superior pack construction and electronics - delivering more work per charge and more work over the life of the battery than any competitive lithium-ion battery on the market. The M18 FUEL 7-1/4" Circular Saw features an LED light to increase accuracy in low light situations and a rafter hook for easy storage in-between cuts. It also features a magnesium shoe as well as upper and lower guards to reduce tool weight while not sacrificing durability. MLT273121 M18 FUEL 7-1/4" Circular Saw Kit Circular Saw Milwaukee M18 2730-20 MLT273020 M18 FUEL 6-1/2" Circular Saw (Bare Tool) The M18 FUEL 6-1/2" Circular Saw is the fastest saw in its class, offering up to 30% faster cutting, 2X more runtime and 3X longer tool life than competitive saws. The POWERSTATE Brushless Motor outpowers all other 18-Volt cordless circular saws and allows you to perform jobs that previously required a corded tool. The M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack (not included) delivers up to 2.5X more runtime and provides more work per charge and more work over the life of the pack than competitive batteries. The saw's REDLINK PLUS Intelligence ensures optimized performance and protection from overloading, overheating and over-discharging. The 18-volt lithium-ion circular saw's guards and shoe are built of cast magnesium to provide a durable, lightweight base. The saw also features an integrated LED light and a rafter hook for convenient storage on the job. The saw includes a blade wrench and a blade. M18 FUEL 6-1/2" Circular Saw (Bare Tool) Hackzall Kit Milwaukee M12 2420-21 M12 HACKZALL Recip Saw Kit At only 11" and 2.6 lbs, the HACKZALL M12 Cordless LITHIUM-ION Recip Saw features a compact and light weight design for superior control and versatility in tight spaces. A powerful motor delivers 0-3,000 strokes per minute and a 1/2" stroke length allows for fast cutting through a wide range of material such as drywall, wood, and PVC. The variable speed trigger allows for a controlled cut while a QUIK-LOK blade clamp offers fast and easy blade changes. MLT242021 M12 HACKZALL Recip Saw Kit Does Not Contain Clearance Items 54
Milwaukee - Cordless - Power Tools Cordless - Saws Hackzall Kit Milwaukee M12 2420-22 M12 HACKZALL Recip Saw Kit At only 11" and 2.6 lbs, the HACKZALL M12 Cordless LITHIUM-ION Recip Saw features a compact and light weight design for superior control and versatility in tight spaces. A powerful motor delivers 0-3,000 strokes per minute and a 1/2" stroke length allows for fast cutting through a wide range of material such as drywall, wood, and PVC. The variable speed trigger allows for a controlled cut while a QUIK-LOK blade clamp offers fast and easy blade changes. MLT242022 M12 HACKZALL Recip Saw Kit Hackzall Kit Milwaukee M18 2625-21 M18 HACKZALL Recip Saw Kit The HACKZALLM18 Cordless LITHIUM-ION One-Handed Recip Saw (2625-20) features a Patent Pending Dual Gear Anti- Vibration System for unmatched comfort and control as well as light weight design for superior control and versatility. The powerful motor delivers 0-3,000 strokes per minute and a 3/4" stroke length allows for fast cutting through a wide range of material such as wood, metal and PVC. The dual gear anti-vibration system increases control and accuracy. The 2625-21 also features a QUIK-LOK blade clamp which offers fast and easy blade changes. MLT262521 M18 HACKZALL Recip Saw Kit Hackzall Kit Milwaukee M18 2719-21 M18 FUEL Hackzall Kit The Milwaukee 2719-21 M18 FUEL HACKZALL is the fastest cutting and most powerful one-handed reciprocating saw. Utilizing a POWERSTATE Brushless Motor and a best in class 7/8" stroke length, the M18 FUEL HACKZALL cuts up to 50% faster than competitors. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. The dual gear counter balance mechanism provides up to 4x lower vibration than traditional reciprocating saws, resulting in faster cut-starts in metal and reduced user fatigue. REDLINK PLUS Intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M18 REDLITHIUM XC5.0 Battery Pack provides more work per charge and more work over the life of the pack than competitive batteries. A rubber seal and weep holes provide superior protection against water and debris. MLT271921 M18 FUEL Hackzall Kit Hackzall Milwaukee M12 2520-20 MLT252020 M12 FUEL HACKZALL Recip Saw (Bare Tool) The M12 FUEL HACKZALL is the fastest cutting and most powerful saw in its class, delivering over 4X more run-time, up to 70% faster cutting, and up to 6X longer tool life than competitive saws. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. Its' light weight design is optimal for overhead cutting applications. The POWERSTATE Brushless Motor outperforms all leading competitors with constant power output, yet runs cooler with no wearable components. REDLINK PLUS Intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M12 REDLITHIUM XC4.0 Battery Pack (not included) provides more work per charge and more work over the life of the pack than competitive batteries. The dual gear counter balance mechanism significantly reduces vibration, providing faster starts in metal and reduced user fatigue. M12 FUEL HACKZALL Recip Saw (Bare Tool) Does Not Contain Clearance Items 55
Milwaukee - Cordless - Power Tools Cordless - Saws Hackzall Milwaukee M18 2719-20 M18 FUEL Hackzall (Bare) The Milwaukee 2719-21 M18 FUEL HACKZALL is the fastest cutting and most powerful one-handed reciprocating saw. Utilizing a POWERSTATE Brushless Motor and a best in class 7/8" stroke length, the M18 FUEL HACKZALL cuts up to 50% faster than competitors. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. The dual gear counter balance mechanism provides up to 4x lower vibration than traditional reciprocating saws, resulting in faster cut-starts in metal and reduced user fatigue. REDLINK PLUS Intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M18 REDLITHIUM XC5.0 Battery Pack provides more work per charge and more work over the life of the pack than competitive batteries. A rubber seal and weep holes provide superior protection against water and debris. MLT271920 M18 FUEL Hackzall (Bare) Sawall Kit Milwaukee M18 2720-21 M18 FUEL SAWZALL Reciprocating Saw Kit The M18 FUEL SAWZALL Reciprocating Saw cuts faster than its corded counterparts and offers up to 2X more runtime and 5X longer tool life than competitive saws. The POWERSTATE brushless motor provides cutting power that has only been associated with corded tools. The M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack delivers up to 2.5X runtime and provides more work per charge and more work over the life of the pack than competitive batteries. The saw's REDLINK PLUS Intelligence ensures optimized performance and protection from overloading, overheating and overdischarging. The 18-volt lithium-ion SAWZALL features an adjustable shoe, integrated LED light, and a hang hook for convenient storage on the job. MLT272021 M18 FUEL SAWZALL Reciprocating Saw Kit Sawall Kit Milwaukee M18 2720-22 MLT272022 M18 FUEL SAWZALL Reciprocating Saw Kit The M18 FUEL SAWZALL Reciprocating Saw cuts faster than its corded counterparts and offers up to 2X more runtime and 5X longer tool life than competitive saws. The POWERSTATE brushless motor provides cutting power that has only been associated with corded tools. The M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack delivers up to 2.5X runtime and provides more work per charge and more work over the life of the pack than competitive batteries. The saw's REDLINK PLUS Intelligence ensures optimized performance and protection from overloading, overheating and overdischarging. The 18-volt lithium-ion SAWZALL features an adjustable shoe, integrated LED light, and a hang hook for convenient storage on the job. M18 FUEL SAWZALL Reciprocating Saw Kit Sawall Kit Milwaukee M18 48-59-1890PS Milwaukee 48-59-1890PS M18 18V Redlithium High Demand Lithium-Ion Starter Kit The M18 REDLITHIUM High Demand 9.0 Ah Battery Pack delivers up to 5X more run-time, 35% more power, and runs 60% cooler than standard 18V lithium-ion batteries. The battery is best optimized for high draw products and sustained runtime applications, and it provides the next, large step towards full corded replacement. The M18 & M12 Rapid Charger charges packs up to 40% faster, reducing downtime and maximizing productivity. The M18 FUEL SAWZALL Reciprocating Saw cuts faster than its corded counterparts and offers up to 2x more runtime and 5x longer tool life than competitive saws. The POWERSTATE brushless motor provides cutting power that has only been associated with corded tools. MLT48591890PS M18 REDLITHIUM HIGH DEMAND 9.0 Starter Kit Does Not Contain Clearance Items 56
Milwaukee - Cordless - Power Tools Cordless - Saws Sawall Milwaukee M18 2720-20 M18 FUEL SAWZALL Reciprocating Saw Kit (Bare Tool) The M18 FUEL SAWZALL Reciprocating Saw cuts faster than its corded counterparts and offers up to 2X more runtime and 5X longer tool life than competitive saws. The POWERSTATE brushless motor provides cutting power that has only been associated with corded tools. The M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack (not included) delivers up to 2.5X runtime and provides more work per charge and more work over the life of the pack than competitive batteries. The saw's REDLINK PLUS Intelligence ensures optimized performance and protection from overloading, overheating and over-discharging. The 18-volt lithium-ion SAWZALL features an adjustable shoe, integrated LED light, and a hang hook for convenient storage on the job. MLT272020 Cordless - Shears M18 FUEL SAWZALL Reciprocating Saw (Bare Tool) Milwaukee 2470-20 - M12 PVC Shear Milwaukee M12 Cordless Lithium-Ion PVC Shear 2470-20 Powerful 12V motor cuts up to 2" schedule 40 PVC in 3 seconds. Two-action variable speed trigger with reverse. All metal planetary drive delivers over 200 cuts per charge. Ultra sharp 3-mm reinforced stainless steel blade. Quick return mechanism. Offset blade facilitates cutting of PVC in walls, close to walls or in the ground. Quick return mechanism. Torque: 1,900 in-lbs. Capacity: 2" PVC or 2-3/8" OD. Length: 14-3/8". Weight: 4.7 lbs. Onboard real-time battery fuel gauge. M12 Lithium-Ion Battery sold separately. MLT247020 M12 Cordless PVC Shear, Max Capacity 2" PVC or 2-3/8" OD (bare tool only) Milwaukee 2470-21 - M12 PVC Shear Kit Milwaukee M12 Cordless PVC Shear Kit, 2470-21 Powerful 12V motor with 1,900 in-lbs torque. Cuts up to 2" schedule 40 PVC in 3 seconds. Ultra sharp blade with pierce point. Offset blade. Quick return blade. All metal planetary drive delivers over 200 cuts per charge. Stainless steel blade and aluminum jaw. Variable speed trigger. On board fuel gauge. Includes 2471 M12 PVC Shear, (1) M12 Lithium-ion battery, 30 minute charge and carrying case. MLT247021 M12 Cordless PVC Shear Kit, Max Capacity 2" PVC, w/ 1 Battery & Charger Milwaukee 48-44-0405 - M12 Shears Replacement Blades Milwaukee Replacement Plastic Pipe Shear Blade 48440405 Replacement PVC Pipe Shear Blade. Capacity: 2". The Milwaukee Plastic Pipe Shear Blade is built for maximum cutting speed and longer blade life. Made from rust-resistant stainless steel, the blade features a reinforced cutting edge that reduces blade chipping for extended durability. Its pierce-point design maintains a sharp cutting surface for maximum speed. The PVC Shear is designed to cut Schedule 40 ABS, Schedule 40 & 80 PVC, Schedule 40 CPVC, Schedule 40 Blazemaster, Non-Metallic Conduit, PEX Tubing, and Rubber Hose. Use with the M12 PVC Shear Tool 2470. MLT48440405 M12 Replacement Plastic Pipe Shear Blade for PVC Shear Tool 2470 Does Not Contain Clearance Items 57
Milwaukee - Cordless - Power Tools Cordless - String Trimmer Milwaukee 2725-21HD - M18 FUEL String Trimmer Kit Milwaukee 2725-21HD - M18 FUEL String Trimmer Kit The M18 FUEL String Trimmer has the power to clear thick brush, reaches full throttle in under 1 second, and provides up to 1 hour of run-time per charge. Designed to meet landscape maintenance professional needs, the motor is positioned in the rear of the trimmer to provide the best combination of power, balance, and maneuverability. The trimmer features high and low speed settings with a variable speed trigger. High provides the power to clear thick brush, and low maximizes runtime while having plenty of power for grass trimming. The 16" cutting swath trims more grass in a single pass, increasing productivity. The full sized head holds more line and has a metal reinforced bump knob for longer life. The M18 FUEL String Trimmer is fully compatible with 150+ solutions on the M18 system. Features: (1) M18 FUEL String Trimmer (Tool Only) (2725-20). (1) M18 & M12 Rapid Charger (48-59-1808). (1) M18 REDLITHIUM HIGH DEMAND 9.0 Battery Pack (48-11-1890). MLT272521HD M18 FUEL String Trimmer Kit Milwaukee 49-16-2712 Trimmer Line Milwaukee Trimmer Line - 49-16-2712 The Milwaukee.080" string trimmer line utilizes high grade polymers and a full mass, twisted design to provide longer life, greater cutting power, and longer run-time. MLT49162712.080" X 150' - Trimmer Line Milwaukee 49-16-2713 Trimmer Line Milwaukee Trimmer Line - 49-16-2713 The Milwaukee.095" string trimmer line utilizes high grade polymers and a full mass, twisted design to provide longer life, greater cutting power, and longer run-time. MLT49162713.095" X 250' - Trimmer Line Cordless - Tube Cutter Milwaukee Milwaukee 2471-20 M12 Copper Tubing Cutter MLT247120 Milwaukee M12 Cordless Lithium-Ion Copper Tubing Cutter 2471-20 Powerful 500-RPM motor. Cuts up to 10X faster than conventional cutters. Versatile cutting mechanism automatically adjusts from 3/8" to 1" tubing and rotates to cut in confined spaces. Makes up to 200 cuts on a single charge. Water resistant sealed head and unibody construction. Built in LED light. Onboard, real-time battery fuel gauge. Speed: 500 RPM. Capacity: 1/2" to 1-1/8" OD. Voltage: 12V. Length: 14". Weight: 2.8 lbs. M12 Lithium-Ion battery sold separately. M12 Cordless Lithium-Ion Copper Tubing Cutter, 1/2" to 1-1/8" OD Capacity (bare tool only) Does Not Contain Clearance Items 58
Milwaukee - Cordless - Power Tools Cordless - Work Fan Milwaukee Milwaukee 0886-20 M18 Jobsite Fan M18 Cordless Lithium-Ion Wet/Dry Vacuum - MLT088020 Works on all Milwaukee 18V slide-on batteries, Red Lithium or NiCd. Powerful motor to provide strong suction and air flow. Tool box style for easy transport and storage. On-board accessory and hose storage. Built-in blower port. Ideal for both wet and dry applications. Max Air Flow: 45 CU ft. per min. 1-1/4" hose accommodates standard vacuum attachments. Dimensions: 11.5"H x 19"W. Includes: vacuum, HEPA filter, vinyl hose, crevice tool and wide nozzle. MLT088620 Cordless - Work Lights M18 Battery Powered Jobsite Fan, 120 Adjustable Head - 3-Speed (Battery & Charger Sold Separately) Milwaukee - 2130-20 M18 LED Work Light Stand Milwaukee M18 Trueview LED Stand Light 2130-20 Sets Up In Five Seconds, 7ft Max Extension. Rotating and pivoting head is extendable from 4-7. Compact 26 footprint with low center of gravity. Three light output modes for optimal brightness and runtime. High Mode: 2,000 lumens for up to 4 hours with M18 XC 5.0 Pack. Medium Mode: 1,300 lumens for up to 6 hours with M18 XC 5.0 Pack. Low Mode: 850 lumens for up to 10 hours with M18 XC 5.0 Pack. High Definition Output with true color, even beam, and natural light. Low battery indicator alerts users when the battery is nearing end of charge. MLT213020 M18 Trueview LED Stand Light - No Battery Milwaukee - 2135-20 M18 LED Work Light Stand MLT213520 Milwaukee - Work Light Stand 2135-20 STAND UP. LIGHT UP. CHARGE UP. The M18 ROCKET LED Tower Light/Charger is designed to deliver a lighting solution that ADAPTS, PERFORMS, and SURVIVES professional use unlike any other portable work light. The 2135-20 can be setup in seconds to a max height of 7', and collapses to less than 4' for easy transport and storage. The light head can be extended from 4-7' to light overhead work or minimize shadows when casting light downward. The multidirectional light head gives users the ability to orient the three independently pivoting light heads to cast light in several directions. With an integrated AC plug, a user can plug in the light with a standard extension cord, and charge any M18 REDLITHIUM pack. Delivering 3,000 lumens, it fills up large areas with TRUEVIEW High Definition light. For optimized control over the output and run-time, the M18 ROCKET LED Light has three settings: high provides 3,000 lumens at 2+ hours, medium provides 1,700 lumens at 4+ hours, and low provides 900 lumens at 8 hours with a M18 REDLITHIUM XC5.0 Battery Pack (not included M18 Rocket LED Tower Light/Charger - No Battery Milwaukee 2145-20 - M18 Radius LED Compact Site Light MLT214520 Milwaukee 2145-20 - M18 Radius LED Compact Site Light MOST VERSATILE LIGHT ON SITE - The M18 Radius LED Compact Site Light is the World's first high output cordless site light on the market, and has the ability to provide light in task, area, and overhead applications. With 4,400 lumens of TRUEVIEW High Definition output, the M18 Radius LED Compact Site Light provides enough light to illuminate large work areas, and can be turned down to as low as 1,000 lumens for working in confined areas. A high impact polycarbonate lens, and IP54 ingress protection allows it to live in the toughest conditions. The combination of these technologies offers professionals the highest quality LED lighting solution, on or off the jobsite. M18 Radius LED Compact Sight Light Does Not Contain Clearance Items 59
Milwaukee - Cordless - Power Tools Cordless - Work Lights Milwaukee 2353-20 M12 LED Spotlight M12 Trueview LED Spotlight- 2353-20 Spots Farther, Lasts Longer - The New TRUEVIEW M12 LED Spot Light gives professionals the most portable, high performance spotlight to illuminate, identify, and diagnose on and off the jobsite. The 2353-20 has a beam distance of 700 Yards, offering the ability to spot objects and areas a long distance away. It has high and a low output modes of operation for long distances, more clarity in closer situations, as well as a strobe mode for safety situations. The M12 LED Spot Light can run for up to 4 hours in its high mode with an M12 REDLITHIUM XC 4.0 Battery Pack, and up to 8 hours in low and strobe modes. The 2353-20 is impact and water resistant to survive professional use, and it features an impact-resistant lens cover. Its high quality LED never needs to be replaced, and is backed by a limited lifetime warranty. MLT235320 M12 Trueview LED Spotlight Milwaukee 2360-20 M18 Rover LED Flood Light M18 ROVER LED Dual Power Flood Light - 2360-20 2X Brighter, Maximum Versatility - M18 ROVER LED Dual Power Flood Light is designed to give professionals a portable area lighting solution that replaces 500W Halogen Flood Lights and adapts, performs, and survives industrial use. The 2360-20 is the industry's brightest 18V LED flood light, and it is up to 20% brighter than 500W Halogen Flood Lights. Capable of filling large areas with light, it provides 3,000 lumens of high definition light output for in its high mode, 1,500 in medium and 650 in low, and it can run for up to 2, 4, or 9 hours with an M18 REDLITHIUM XC 5.0 Battery Pack. In addition to running off of M18 batteries, it can run off of an AC cord for all day applications. It uses high quality LEDs with a neutral white color and a high color rendering index paired with a Milwaukee designed reflector to produce an even beam pattern. Its head rotates 240 to direct light where it is needed, and there are 3 keyholes in its base for hanging in multiple orientations. Its compact footprint and integrated carry handles allow for easy transport or storage in bags, on carts, or in job boxes. This light stands up to the toughest working conditions, through its durable roll cage design and impactresistant lens and bezel. It offers significant advantages over halogen work lights with superior impact durability and temperature management, and its LEDs never need to be replaced, and are backed by a limited lifetime warranty. MLT236020 M18 Rover LED Dual Power Flood Light Milwaukee 2361-20 M18 Rover LED Flood Light MLT236120 M18 ROVER LED Flood Light - 2361-20 The Milwaukee M18 ROVER LED Flood Light delivers up to 30% brighter light output than corded 250W halogen lights. Designed to illuminate large workspaces on the jobsite, the cordless flood light uses 8 high-quality LEDs to provide 1,100 lumens and up to 1,300 lux. It's powered by the M18 REDLITHIUM battery for up to 8 hours of runtime on a single charge. With its roll cage design and impact-resistant, replaceable lens, it stands up to the toughest working conditions. This compact flood light features an octagonal shape so the light may be used at multiple angles. The versatile hanger provides hands-free use in a variety of applications. The light carries a limited lifetime LED warranty. M18 Rover LED Flood Light Milwaukee 2735-20 M18 LED Work Light M18 LED Work Light - 2735-20 The Milwaukee M18 Cordless LED Work Light lasts 600X longer than conventional incandescent bulbs. Powered by the M18 REDLITHIUM battery, it runs up to 4X longer on a single charge. Its 135 rotating head allows you to easily direct the light beam at the desired work area, while its integrated hook enables hands-free use. With a sealed aluminum head to provide impact and weather resistance, the cordless work light comes with a limited lifetime LED warranty. MLT273520 M18 LED Work Light w/o Battery or Charger Does Not Contain Clearance Items 60
Milwaukee - Cordless - Power Tools Cordless - Work Lights Milwaukee 49-24-0146 M12 LED Work Light M12 LED Work Light - 49-24-0146 The Milwaukee M12 Cordless LED Work Light outlasts and outperforms all other subcompact lights. Powered by an M12 RED LITHIUM battery, the work light is 2X brighter than conventional incandescent bulbs and runs up to 2X longer on a single charge. Its 90 rotating head allows you to easily direct the light beam at the desired work area, while its magnetic back enables hands-free use. With a sealed aluminum head for impact and weather resistance, the cordless work light comes with a limited lifetime LED warranty. MLT49240146 M12 LED Work Light w/o Battery Milwaukee 49-81-0090 Upgrade to LED Bulb LED Upgrade Bulb - 49-81-0090 Replacing Milwaukee M12, M18, V28, and most other branded 9.6V-28V incandescent bulbs, the 49-81-0090 Upgrade to LED bulb works in most power tool work lights and delivers over 3X the run-time of traditional light bulbs. With a 50,000 hour LED and limited lifetime warranty; the 49-81-0090 is a solid state light that will not break from a fall. Limited Lifetime Warranty. MLT49810090 LED Replacment Bulb Upgrade for Most Power Tool Work Lights Replacement V28 Lamp 48-81-0040 V28 2-Pack Work Light Replacement Bulbs - 49-81-0040 Two pack of 28 volt work light bulbs. For use in the 49-24-0185 V28 work light only MLT49810040 Replacement Lamps for V28 Work Light - 2 Pack Cordless - Work Wet/Dry Vac Milwaukee Milwaukee 2471-20 - M18 Wet/Dry Vacuum MLT088020 M18 Cordless Lithium-Ion Wet/Dry Vacuum - MLT088020 Works on all Milwaukee 18V slide-on batteries, Red Lithium or NiCd. Powerful motor to provide strong suction and air flow. Tool box style for easy transport and storage. On-board accessory and hose storage. Built-in blower port. Ideal for both wet and dry applications. Max Air Flow: 45 CU ft. per min. 1-1/4" hose accommodates standard vacuum attachments. Dimensions: 11.5"H x 19"W. Includes: vacuum, HEPA filter, vinyl hose, crevice tool and wide nozzle. M18 Cordless Lithium-Ion Wet/Dry Vacuum Does Not Contain Clearance Items 61
Milwaukee - Cordless - Power Tools Chargers - for Milwaukee Cordless Tools Milwaukee - Cordless Battery Chargers For M12 & M18 MLT48591806 MLT48591807 MLT48591810 MLT48591812 MLT48591890 MLT48592401 18V Six-Station Sequential M18 Li-Ion Battery Charger M18 & M12 6-Bay Rapid Charge Station, Charges 3 Batteries Simultaneously M18 & M12 Vehicle Charger M18 & M12 Multi-Voltage Charger Starter Pack - M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack (48-11-1850) & M18 & M12 Multi-Voltage Charger (48-59-1812) M12 Lithium-ion Compact Battery Charger Milwaukee - Power Tools Milwaukee Parts & Accessories Milwaukee - Chuck Key Holders Chuck Key Holders 48-66-4020: For use with chuck key 48-66-3160. 48-66-4040: For use with chuck keys 48-66-3080, 48-66-3240, 48-66- 3280 and 48-66-3480 MLT48664020 Chuck Key Holder MLT48664040 Chuck Key Holder Milwaukee - Chuck Keys MLT48663080 MLT48663240 MLT48663280 Milwaukee Chuck Keys Chuck keys tighten the jaws of the chuck. 3/8" Chuck Key 5/16", 3/8" Chuck Key 3/8", 1/2" Chuck Key Does Not Contain Clearance Items 62
Milwaukee - Power Tools Milwaukee Parts & Accessories Milwaukee Parts Assorted Milwaukee Parts MLT06752402 10-32 x 1/2 - Screw Set for Sawzall MLT06832625 1/4-20 x 1/4" - Bit Extension Set Screw MLT06832960 Blade Screw for 6527 & 6528 MLT22160275 Carbon Brush MLT22180450 Hole Hawg Carbon Brush Assembly MLT22640121 Cord Set 120V MLT22640395 Cord Set 120V MLT22640405 Cord Set MLT23520160 Brush Spring MLT42680073 Blade Clamp MLT42680677 Blade Clamp for 6527 & 6528 MLT45160495 Pivot Shoe Assembly Sawsall MLT45690010 Rubber Wheel for Band Saw MLT48062871 Allow 5-1/2" - Right Angle Drill Head and Chuck. MLT48286870 Feed Screw Coarse Thread MLT48325032 1/4" Hex to 1/2" Square Socket Adapter MLT48764008 8' Quik-Lok Cord MLT49810020 Replacement Lamp 12 + 14 4 2pack MLT49810030 18V Replacement Lamp 2-Pack WBS Milwaukee - Radios Milwaukee - Radios MLT259020 M12 Cordless Lithium-Ion Job Site Radio w/ AC Adapter MLT279220 M18 Jobsite Radio/Charger w/ Bluetooth MLT289020 M18 Cordless Jobsite Radio w/ A/C Adapter & USB Charging Port MLT289120 M18/M12 Wireless Jobsite Speaker Does Not Contain Clearance Items 63
Tool Storage Organizers, Boxes & Pouches Tool Bags Tool Bags - Milwaukee Milwaukee 48-22-8200 Jobsite Bag Milwaukee 48-22-8200 Jobsite Bag 35 Pockets for organizing tools. Impact Resistant Molded Base - Protects contents and allows backpack to stand up. 1680 Ballistic Material. Load-Bearing Harness- Padded and Brethable for all day comfort. Laptop Sleeve - Holds Laptops up to 15.6". Bulk Pocket - Quick access to bulks items such as fish tapes and power tools. Attachment Strap - Allows bag to be easily and securly attached to vertical handles. MLT48228200 16" L X 10" W X 20"H - Jobsite Bag Milwaukee 48-55-3490 Contractor Bag Milwaukee 48-55-3490 Contractor Bag 17x9x10, tough, water resistant 600 denier material, shoulder strap or dual handle straps for easy carrying, durable zipper closure. Ideal for tool and accessory storage. MLT48553490 17" L X 9" W X 10" H - Contractor Bag Miwaukee 48-22-8310 Packout Tote Mikwaukee 48-22-8310 Packout Tote Part of the industry's most versatile and most durable modular storage system, the Milwaukee PACKOUT 10 inch storage tote features an impact resistant molded base that fully integrates with all PACKOUT system components. Constructed with 1680D ballistic material and all metal hardware, the 10 in storage tote is designed for ultimate durability and features 28 total pockets to organize your tools and accessories. Part of the PACKOUT Modular Storage System. 1680 Ballistic Material Construction. Impact Resistant Molded Base. All Metal Hardware. Durable Overmolded Handle. 28 Total Pockets. MLT48228310 10" W X 13" H - Packout Tote Miwaukee 48-22-8315 Packout Tote Tool Storage Organizers, Boxes & Pouches MLT48228315 Mikwaukee 48-22-8315 Packout Tote Part of the industry's most versatile and most durable modular storage system, the Milwaukee PACKOUT 15 inch storage tote features an impact resistant molded base that fully integrates with all PACKOUT system components. Constructed with 1680D ballistic material and all metal hardware, the 15 inch storage tote is designed for ultimate durability while the included padded should strap and durable overmolded handle allow for easy transport. The 15 inch tote features 31 total pockets designed to organize and carry power tools, hand tools and accessories. Part of the PACKOUT Modular Storage System. 1680 Ballistic Material Construction. Impact Resistant Molded Base. All Metal Hardware. Padded Shoulder Strap. Durable Overmolded Handle. 31 Total Pockets. 15" W X 17" H - Packout Tote Does Not Contain Clearance Items 64
Tool Storage Organizers, Boxes & Pouches Tool Bags Tool Bags - Milwaukee Miwaukee 48-22-8320 Packout Tote Mikwaukee 48-22-8320 Packout Tote Part of the industries most versatile and most durable modular storage system, the Milwaukee Pack out 20 in. storage tote features an impact resistant molded base that fully integrates with all Pack out system components. Constructed with 1680D ballistic material and all metal hardware, the 20 in. storage tote is designed for ultimate durability while the included padded should strap and durable over molded handle allow for easy transport. The 20 in. tote features 32 total pockets designed to organize and carry power tools, hand tools and accessories. All metal hardware. Padded shoulder strap. Durable over molded handle. 32 total pockets. Metal tape clip. Tape strap. Reinforced side walls. 2 zippered pockets. MLT48228320 20" W X 17" H - Packout Tote Tool Boxes Tool Boxes - Milwaukee Miwaukee 48-22-8424 Packout Tool Box MLT48228424 Mikwaukee 48-22-8424 Packout Tool Box Part of the industry's most versatile and most durable modular storage system, the Milwaukee PACKOUT tool box is constructed with impact resistant polymers and metal reinforced corners to provide up to 75lbs of weight capacity and ultimate durability in harsh jobsite conditions. Featuring an IP65 rated weather seal to keep out rain and jobsite debris, and integrated organizers bins, the Milwaukee PACKOUT tool box is the fully compatible with all Milwaukee PACKOUT modular storage products. Part of the PACKOUT Modular Storage System. Constructed with Impact Resistant Polymers. 75lbs Weight Capacity. IP65 Rated Weather Seal. Metal Reinforced Corners. Metal Reinforced Locking Point. Interior Organizer Trays. Mounting Location for the ONE-KEY TICK. 16.1" W X 6.6" H - Packout Tool Box Miwaukee 48-22-8425 Packout Tool Box Mikwaukee 48-22-8425 Packout Tool Box Part of the industry's most versatile and most durable modular storage system, the Milwaukee PACKOUT large tool box is constructed with impact resistant polymers and metal reinforced corners to provide up to 100lbs of weight capacity and ultimate durability in harsh jobsite conditions. Featuring an IP65 rated weather seal to keep out rain and jobsite debris, and a metal reinforced top handle, the Milwaukee PACKOUT large tool box is fully compatible with all Milwaukee PACKOUT modular storage products. Part of the PACKOUT Modular Storage System. Constructed with Impact Resistant Polymers. 100lbs Weight Capacity. IP65 Rated Weather Seal. Metal Reinforced Top Handle. Metal Reinforced Corners. Metal Reinforced Locking Point. Interior Organizer Tray. Mounting Location for the ONE-KEY TICK. MLT48228425 16.1" W X 11.3" H - Large Packout Tool Box Miwaukee 48-22-8426 Packout Tool Box MLT48228426 Mikwaukee 48-22-8426 Packout Tool Box Part of the industry's most versatile and most durable modular storage system, the Milwaukee PACKOUT rolling tool box is constructed with impact resistant polymers, an industrial grade extension handle, 9" all terrain wheels and metal reinforced corners to provide up to 250lbs of weight capacity in harsh jobsite conditions. Featuring an IP65 rated weather seal to keep out rain and jobsite debris, the Milwaukee PACKOUT rolling tool box is fully compatible with all Milwaukee PACKOUT modular storage products. Part of the PACKOUT Modular Storage System. Constructed with Impact Resistant Polymers. 250lbs Weight Capacity. Industrial Grade Extension Handle. 9" All-Terrain Wheels. IP65 Rated Weather Seal. Metal Reinforced Corners. Metal Reinforced Locking Point. Interior Organizer Tray. Mounting Location for the ONE-KEY TICK. 25.6" W X 18.9" H - Rolling Packout Tool Box Tool Storage Organizers, Boxes & Pouches Does Not Contain Clearance Items 65
Tool Storage Organizers, Boxes & Pouches Tool Boxes Tool Boxes - Milwaukee Miwaukee 48-22-8430 Packout Organizer Mikwaukee 48-22-8430 Packout Tool Box Part of the industry's most versatile and most durable modular storage system, the Milwaukee PACKOUT organizer is constructed with impact resistant materials for jobsite durability and features an IP65 rated weather seal to keep out rain and jobsite debris. The interior features 10 removable bins that can be mounted onto common jobsite materials for easy access and no-travel bins seals to prevent the bins contents from migrating between bins during transport. Part of the PACKOUT Modular Storage System. Constructed with Impact Resistant Polymers. 10 Removable & Mountable Bins. IP65 Rated Weather Seal. No-Travel Bins Seal Prevent Small Part Migration Between Bins. MLT48228430 15" W X 4.61" H - Packout Organizer Miwaukee 48-22-8435 Packout Organizer Mikwaukee 48-22-8435 Packout Tool Box Part of the industry's most versatile and most durable modular storage system, the Milwaukee PACKOUT compact organizer is constructed with impact resistant materials for jobsite durability and features an IP65 rated weather seal to keep out rain and jobsite debris. Part of the PACKOUT Modular Storage System. Constructed with Impact Resistant Polymers. 5 Removable & Mountable Bins. IP65 Rated Weather Seal. No-Travel Bins Seal Prevent Small Part Migration Between Bins. MLT48228435 15.24" W X 4.61" H - Compact Packout Organizer Tool Storage Organizers, Boxes & Pouches Does Not Contain Clearance Items 66
A Aquapex Tools 1 Arbor/Pilot Drill Bits 17 Assorted Drill Bit Kits - Milwaukee 8-9 Auger Drill Bits 9-10 B Band Saw Kit Milwaukee M18 2629-22 52 Band Saw Kit Milwaukee M18 2729-22 52 Band Saw Milwaukee M12 2429-20 53 Band Saw Milwaukee M18 2629-20 53 Band Saw Milwaukee M18 2729-20 53 Bandsaw Blades 22 Batteries - for Milwaukee Cordless 28-31 Batteries & Flashlights 2 C Chargers - for Milwaukee Cordless 62 Circular Cutting Blades 20 Circular Cutting Blades & Discs 20 Circular Saw Kit Milwaukee M18 54 Circular Saw Kit Milwaukee M18 54 Circular Saw Milwaukee M18 2730-20 54 Combo Kits - Milwaukee Cordless 31-34 Cordless - Blower 34 Cordless - Cable Cutter 34-35 Cordless - Caulk Gun Milwaukee 35 Cordless - Crimper, Press & Jaws 35-36 Cordless - Drain Tools 36-37 Cordless - Drill Drivers/Screwdrivers 37-39 Cordless - Drill Hole Hawg 39-41 Cordless - Dust Extractors 41-43 Cordless - Grease Guns 43 Cordless - Grinder 44 Cordless - Hedge Trimmers 44 Cordless - Impact Drivers 45-48 Cordless - Inflator 49 Cordless - Knockouts 49 Cordless - Multi Tools 49-50 Cordless - Multi Tools 2426-22 49 Cordless - Multi Tools 2626-22 50 Cordless - Multi Tools 48-90-1009 50 Cordless - Nailer Milwaukee 50 Cordless - Rotary Hammers 51-52 Cordless - Saws 52-57 Cordless - Shears 57 Cordless - String Trimmer 58 Cordless - Tube Cutter Milwaukee 58 Cordless - Work Fan Milwaukee 59 Cordless - Work Lights 59-61 Cordless - Work Wet/Dry Vac 61 D Demolition Bits 6-7 Demolition Bits - Milwaukee 6-7 Diamond Files 17 Drain - Hand Augers/Snakes 2-3 Drain Cleaning Equipment 2-3 Drill Bit Extensions 10-11 Drilling Bits & Accessories 8-16 Drills - Hole Hawg Milwaukee Corded 23 Drills - Milwaukee Corded 28 E Electronic Meters, Instruments & Testers 3 F Table of Contents Alphabetized Listing Fastening Bits & Accessories 17 Fastening Bits & Accessories 17 Flashlight - Milwaukee 2 Flashlights 2 Flashlights - Milwaukee 2 Flat Boring Bit - Milwaukee 9 Flat Boring Bit Set 6-Pc - Milwaukee 10 G Grinders - Milwaukee Corded 23-24 H Hackzall Kit Milwaukee M12 2420-21 54 Hackzall Kit Milwaukee M12 2420-22 55 Hackzall Kit Milwaukee M18 2625-21 55 Hackzall Kit Milwaukee M18 2719-21 55 Hackzall Milwaukee M12 2520-20 55 Hackzall Milwaukee M18 2719-20 56 Hand Tools & Accessories 3-5 Heat Guns - Milwaukee Corded 24 Hole Cutting Bits & Accessories 17-19 Hole Saw Arbors - Mandrels - Pilot Bits 17 Hole Saw Bits, Hole Cutters & 17-18 Hole Saw Kits 18-19 I Impact Wrench - Milwaukee Corded 24 J Jig Saw Blades 20 Jig Saws - Milwaukee 20 K Knives - Utility & Pocket 3 Knot Cup Brushes - Milwaukee 22 Knot Wheel Full Cable Twist 22 L Levels & Measuring Tools 5 Light Testers 3 M Maintenance Supplies 1 Markers 1 Masonry Drilling Bits & Accessories 11-15 Measuring Tools 5 Milwaukee 6 Milwaukee - 2130-20 M18 LED Work 59 Milwaukee - 2135-20 M18 LED Work 59 Milwaukee - 4-1/2" Small Angle Grinder 23 Milwaukee - 5" Small Angle Grinder 24 Milwaukee - 6" Small Angle Grinder 24 Milwaukee - Chuck Key Holders 62 Milwaukee - Chuck Keys 62 Milwaukee - Circular Cutting Blades 20 Milwaukee - CORDED Power Tools 23, 25-28 Milwaukee - Corded Power Tools 23-26 Milwaukee - Cordless - Power Tools 28-62 Milwaukee - Hole Saw Cutters 17-18 Milwaukee - Inkzall Jobsite Markers 1 Milwaukee - Knives - Utility & Pocket 3 Milwaukee - M12 Drain Snake Kit 2571-212 Milwaukee - M12 Trapsnake 4 in Urinal 2 Milwaukee - M12 Trapsnake 6 in Urinal 3 Milwaukee - Pliers 4 Milwaukee - Power Tools 62-63 Milwaukee - Radios 63 Milwaukee - Recip Blades 21 Milwaukee 0726-22 28V Hammer Drill 37 Milwaukee 0886-20 M18 Jobsite Fan 59 Milwaukee 0928-23 V28 Combo Kit 31 Milwaukee 1675-6 1/2" Hole Hawg Drill 23 Milwaukee 1676-6 1/2" Hole Hawg Drill 23 Milwaukee 1680-21 1/2" Super Hawg 23 Milwaukee 2145-20 - M18 Radius LED 59 Milwaukee 2306-22 M12 HammerVac 41 Milwaukee 2353-20 M12 LED Spotlight 60 Milwaukee 2360-20 M18 Rover LED 60 Milwaukee 2361-20 M18 Rover LED 60 Milwaukee 2401-22 M12 Micro Driver 38 Milwaukee 2404-20 M12 Hammer 38 Milwaukee 2404-22 M12 Hammer 38 Milwaukee 2407-22 M12 Drill/Driver Kit 38 Milwaukee 2408-22 M12 Hammer 38 Milwaukee 2446-21XC - M12 Grease 43 Milwaukee 2453-20 M12 Fuel Impact 45 Milwaukee 2453-22 M12 Impact Driver 45 Milwaukee 2458-21 12V Palm Nailer Kit 50 Milwaukee 2462-20 M12 Impact Driver 45 Milwaukee 2462-22 M12 Impact Driver 45 Milwaukee 2470-20 - M12 PVC Shear 57 Milwaukee 2470-21 - M12 PVC Shear 57 Milwaukee 2471-20 - M18 Wet/Dry 61 Milwaukee 2471-20 M12 Copper 58 Milwaukee 247121 Copper Tubing Cutter 6 Milwaukee 2472-20 M12 Cable Cutter 34 Milwaukee 2472-21XC Cable Cutter Kit 35 Milwaukee 2475-20 Compact Inflator 49 Milwaukee 2494-22 M12 2-Tool Combo 31 Milwaukee 2572B-21 M12 AIRSNAKE 36 Milwaukee 2597-22 M12 Combo Kit 32 Milwaukee 2605-20 M18 Rotary Hammer51 Milwaukee 2605-22 M18 Rotary 51 Milwaukee 2615-21 M18 Right Angle Drill39 Milwaukee 2641-21CT M18 Caulk Gun 35 Milwaukee 2646-22CT - M18 Grease 43 Milwaukee 2657-22 M18 Impact Driver 45 Milwaukee 2662-22 18V Impact 46 Milwaukee 2676-22 M18 Knockout Kit 49 Milwaukee 2676-23 M18 Knockout Kit 49 Milwaukee 2678-20 M18 Press Tool Kit 35 Milwaukee 2680-22 M18V 44 Milwaukee 2691-22 M18 Combo Kit 32 Milwaukee 2694-22 M18 Hammer Drill &32 Milwaukee 2694-24 M18 4-Pack 32 Milwaukee 2695-24 M18 4-Tool Combo 33 Milwaukee 2696-24 M18 4-Tool Combo 33 Milwaukee 2697-22 M18 Hammer Drill &33 Milwaukee 2704-20 M18 Hammer 39 Milwaukee 2704-22 M18 Hammer 39 Milwaukee 2708-20 M18 Hole Hawg 39 Milwaukee 2708-22 M18 Hole Hawg 40 Milwaukee 2708-22HD M18 FUEL 40 Milwaukee 2709-22 M18 FUEL Super 40 Milwaukee 2711-22 M18 FUEL Super 40 Milwaukee 2711-22HD M18 FUEL 41 Milwaukee 2712-20 M18 Rotary Hammer51 Milwaukee 2712-22 M18 Rotary 51 Milwaukee 2715-20 M18 Rotary Hammer51 Milwaukee 2715-22 M18 Rotary 52
M Milwaukee 2715-DE M18 HammerVac 42 Milwaukee 2717-22HD M18 Rotary 52 Milwaukee 2725-21HD - M18 FUEL 58 Milwaukee 2726-20 M18 Fuel Hedge 44 Milwaukee 2728-21 M18 FUEL 34 Milwaukee 2735-20 M18 LED Work Light60 Milwaukee 2753-20 M18 FUEL 1/4" 46 Milwaukee 2753-22 M18 FUEL Impact 46 Milwaukee 2754-22 M18 FUEL 46 Milwaukee 2755B-20 M18 Impact Driver 47 Milwaukee 2760-22 M18 Fuel Surge 47 Milwaukee 2763-22 M18 Impact 47 Milwaukee 2765-20 M12 Fuel Impact 48 Milwaukee 2767-20 M18 High Torque 48 Milwaukee 2767-22 M18 High Torque 48 Milwaukee 2771-20 Transfer Pump 1 Milwaukee 2772A-21 M18 FUEL Drain 37 Milwaukee 2773-22 M18 Press Tool Kit 36 Milwaukee 2775B-211 M18 FUEL 37 Milwaukee 2780-20 M18 Fuel Grinder 44 Milwaukee 2780-22 M18 Fuel Grinder Kit44 Milwaukee 2796-22 M18 2-Tool Combo 33 Milwaukee 2894-22 M18 Combo Kit 34 Milwaukee 2897-22 M18 Hammer Drill 34 Milwaukee 3/4" Hex Clay Spade 6 Milwaukee 3-Flat Hammer-Drill Bits 11 Milwaukee 48-03-3035 SDS Plus Dust 42 Milwaukee 48-03-3235 SDS Dust Trap 42 Milwaukee 48-11-1024 14.4V Battery 28 Milwaukee 48-11-1822 18V Lith-ion 28 Milwaukee 48-11-1830 18V Battery 28 Milwaukee 48-11-1850 18V RedLithium 29 Milwaukee 48-11-1852 18V RedLithium 29 Milwaukee 48-11-1860 18V RedLithium 29 Milwaukee 48-11-1890 18V RedLithium 29 Milwaukee 48-11-2230 18V Battery 30 Milwaukee 48-11-2232 18V NiCd 30 Milwaukee 48-11-2440 12V Battery 30 Milwaukee 48-11-2460 12V RedLithium 30 Milwaukee 48-11-2830 28V Battery 31 Milwaukee 48-22-3079 Gen II 4 Milwaukee 48-22-4040 Offset Scissors 5 Milwaukee 48-22-4041 Straight Scissors 5 Milwaukee 48-22-6100 Lineman Pliers 4 Milwaukee 48-22-6101 Long Nose Pliers 4 Milwaukee 48-22-6330 Straight Jaw 4 Milwaukee 48-22-8200 Jobsite Bag 64 Milwaukee 48-32-4006 Shockwave 8 Milwaukee 48-32-4403 Shockwave 8 Milwaukee 48-38-0010 Replacement 6 Milwaukee 48-44-0405 - M12 Shears 57 Milwaukee 48-55-3490 Contractor Bag 64 Milwaukee 48-89-4633 Shockwave 8 Milwaukee 48-89-4680 Shockwave 8 Milwaukee 49-16-2712 Trimmer Line 58 Milwaukee 49-16-2713 Trimmer Line 58 Milwaukee 49-16-BGD3 M18 6T Fixed 36 Milwaukee 49-24-0146 M12 LED Work 61 Milwaukee 49-66-4419 Shockwave 8pc 9 Milwaukee 49-81-0090 Upgrade to 61 Milwaukee 5262-21 SDS Plus Rotary 25 Milwaukee 5263-21 SDS Plus Rotary 25 Milwaukee 5268-21 SDS Plus Rotary 25 Milwaukee 5316-21 Spline Rotary 25 Milwaukee 5317-21 SDS Max Rotary 25 Milwaukee 5342-21 SDS Max Rotary 26 Milwaukee 6232-21 Band Saw Deep 26 Milwaukee 6390-21 7-1/4" Circular 26 Milwaukee 6509-31 Sawzall - 12 AMP 26 Milwaukee 6523-21 Sawzall - 13 AMP 27 Milwaukee 6536-21 Sawzall - 13 AMP 27 Milwaukee 6538-21 Sawzall - 15 AMP 27 Milwaukee 6852-20 Shear 27 Milwaukee 8960-20 Dust Extractor 43 Milwaukee 8975 Heat Gun 24 Milwaukee 9070-20 1/2" Impact Wrench 24 Milwaukee All Hex Bit Ext. 48-28-1020 10 Milwaukee Big Hawg - Hole Cutter Kit 18 Milwaukee Big Hawg - Hole Cutter Kit 18 Milwaukee Bit Extension - 48-28-40 10 Milwaukee Contractor Bit Kit 15 Milwaukee Core Bit SDS-MAX & 11-12 Milwaukee Electrician Kit 49-22-4095 18 Milwaukee Electricians Carbide Cutter 19 Milwaukee Electricians Kit 49-22-4088 19 Milwaukee Extensions 12 Milwaukee General Purpose Kit 19 Milwaukee M12 Redlithium 12V Battery 31 Milwaukee Parts 63 Milwaukee Parts & Accessories 62-63 Milwaukee Plumbers Kit 49-22-4142 19 Milwaukee Quik-Lok Bit Ext. 48-28-10 11 Milwaukee SDS Plus Bit Set 12 Milwaukee SDS Plus Drill Bits 12-13 Milwaukee SDS-Max Adapters 13 Milwaukee SDS-Max Bull Point 6 Milwaukee SDS-Max Chisels 7 Milwaukee SDS-Max Drill Bits 13 Milwaukee SDS-Max Ground Rod Driver 7 Milwaukee SDS-Plus Chisels 7 Milwaukee SDS-Plus to Chuck Adpapter14 Milwaukee Self-Feed Bits 15 Milwaukee Shockwave Impact Adapters 48 Milwaukee Single Ended Feed Screw 16 Milwaukee Spline 3/4" Hex X 21/32 7 Milwaukee Spline Adapters 14 Milwaukee Spline Bits 14 Milwaukee Step Drill Bit Set 3-PC 16 Milwaukee Switchblade 5-Pc Bit Kit 16 Milwaukee Switchblade Self-Feed Bits 16 Milwaukee Tapcon Install. Kit 15 Milwaukee Thin Wall Hole Saw Kit 19 Milwaukee Thunderbolt Drill Bit Set 9 Milwaukke Measuring Tapes & Wheels 5 Miwaukee 48-22-8310 Packout Tote 64 Miwaukee 48-22-8315 Packout Tote 64 Miwaukee 48-22-8320 Packout Tote 65 Miwaukee 48-22-8424 Packout Tool Box65 Miwaukee 48-22-8425 Packout Tool Box65 Miwaukee 48-22-8426 Packout Tool Box65 Miwaukee 48-22-8430 Packout 66 Miwaukee 48-22-8435 Packout 66 P Table of Contents Alphabetized Listing Pipe - PEX & Fittings 1 Pipe & Fittings 1 Pipe & Tubing Tools 6 Pipe Cutters 6 Pliers 4 Plumbing - Pipe, Valves and Fittings 1 Plumbing - Pumps and Water Conditioning1 Power Tool Accessories 6-22 23-63 ProPEX M12 Expansion Tool Kit 1 Pumps - Utility 1 R Reciprocating Blades 21 Replacement V28 Lamp 48-81-0040 61 Rotary Hammers - Milwaukee 25-26 S Saw Blades 20-22 Sawall Kit Milwaukee M18 2720-21 56 Sawall Kit Milwaukee M18 2720-22 56 Sawall Kit Milwaukee M18 56 Sawall Milwaukee M18 2720-20 57 Saws - Milwaukee Corded 26-27 Scissors 5 Self-Feed Bits & Kits 15-16 Shears - Milwaukee Corded 27 Ship Auger Bit - Milwaukee 10 Step-Drill Bits 16 T Tool Bags 64-65 Tool Bags - Milwaukee 64-65 Tool Boxes 65-66 Tool Boxes - Milwaukee 65-66 Tool Storage Organizers, Boxes & 64-66 Tools & Accessories 2-66 W WBS 2-3, 5, 17, 22, 28, 62-63 Wire Brushes 22 Work Scissors 5
M 28 MLT02346 63 MLT06752402 63 MLT06832625 63 MLT06832960 37 MLT072622 61 MLT088020 59 MLT088620 31 MLT092823 23 MLT16756 23 MLT16766 23 MLT168021 2 MLT2105 2 MLT211021 2 MLT211121 2 MLT211221 59 MLT213020 59 MLT213520 59 MLT214520 3 MLT221020 63 MLT22160275 63 MLT22180450 63 MLT22640121 63 MLT22640395 63 MLT22640405 41 MLT230622 63 MLT23520160 60 MLT235320 2 MLT235520 60 MLT236020 60 MLT236120 38 MLT240122 38 MLT240420 38 MLT240422 38 MLT240722 38 MLT240822 54 MLT242021 55 MLT242022 49 MLT242622 53 MLT242920 1 MLT243222 43 MLT244621XC 45 MLT245320 45 MLT245322 50 MLT245821 45 MLT246220 45 MLT246222 57 MLT247020 57 MLT247021 58 MLT247120 6 MLT247121 34 MLT247220 35 MLT247221XC 49 MLT247520 31 MLT249422 55 MLT252020 2 MLT257121 36 MLT2572B21 2 MLT257421 3 MLT257621 63 MLT259020 32 MLT259722 51 MLT260520 51 MLT260522 39 MLT261521 55 MLT262521 50 MLT262622 53 MLT262920 52 MLT262922 35 MLT264121CT 43 MLT264622CT 45 MLT265722 46 MLT266222 49 MLT267622 49 MLT267623 35 MLT267820 44 MLT268022 32 MLT269122 32 MLT269422 32 MLT269424 33 MLT269524 33 MLT269624 33 MLT269722 39 MLT270420 39 MLT270422 39 MLT270820 40 MLT270822 40 MLT270822HD 40 MLT270922 40 MLT271122 41 MLT271122HD 51 MLT271220 51 MLT271222 51 MLT271520 52 MLT271522 42 MLT2715DE 52 MLT271722HD 56 MLT271920 55 MLT271921 57 MLT272020 56 MLT272021 56 MLT272022 58 MLT272521HD 44 MLT272620 34 MLT272821 53 MLT272920 52 MLT272922 54 MLT273020 54 MLT273021 54 MLT273121 60 MLT273520 46 MLT275320 46 MLT275322 46 MLT275422 47 MLT2755B20 47 MLT276022 47 MLT276322 48 MLT276520 48 MLT276720 48 MLT276722 1 MLT277120 37 MLT2772A21 36 MLT277322 37 MLT2775B211 44 MLT278020 44 MLT278022 63 MLT279220 33 MLT279622 63 MLT289020 63 MLT289120 34 MLT289422 34 MLT289722 28 MLT31026 28 MLT31076 63 MLT42680073 63 MLT42680677 63 MLT45160495 63 MLT45690010 21 MLT48001420 21 MLT48001430 21 MLT48004091 21 MLT48004093 21 MLT48004182 21 MLT48004184 21 MLT48004186 21 MLT48004187 21 MLT48004188 21 MLT48004712 21 MLT48004713 21 MLT48004782 21 MLT48004784 21 MLT48004787 21 MLT48004788 21 MLT48005015 21 MLT48005016 21 MLT48005021 21 MLT48005026 21 MLT48005027 21 MLT48005041 21 MLT48005712 21 MLT48005713 21 MLT48005782 21 MLT48005784 21 MLT48005787 21 MLT48005788 21 MLT48005789 42 MLT48033035 42 MLT48033235 14 MLT48033564 13 MLT48033572 48 MLT48034405 48 MLT48034410 17 MLT48062860 63 MLT48062871 17 MLT48095055 28 MLT48111024 28 MLT48111822 28 MLT48111830 29 MLT48111850 29 MLT48111852 29 MLT48111860 29 MLT48111890 30 MLT48112230 30 MLT48112232 31 MLT48112420 30 MLT48112440 Table of Contents Part Number Index
30 MLT48112460 31 MLT48112830 10 MLT48136000 13 MLT48203902 13 MLT48203904 13 MLT48203932 13 MLT48203946 13 MLT48203954 13 MLT48203972 13 MLT48203988 13 MLT48203992 13 MLT48203993 14 MLT48204037 14 MLT48204051 14 MLT48204052 14 MLT48204056 14 MLT48204063 14 MLT48204076 14 MLT48204078 14 MLT48204100 14 MLT48204101 14 MLT48204113 14 MLT48204125 14 MLT48204126 14 MLT48204151 14 MLT48204305 14 MLT48204335 14 MLT48204395 14 MLT48204400 14 MLT48204415 11 MLT48205125 11 MLT48205130 12 MLT48205135 12 MLT48205140 12 MLT48205145 12 MLT48205150 12 MLT48205155 12 MLT48205160 12 MLT48205165 12 MLT48207061 12 MLT48207065 12 MLT48207066 12 MLT48207071 12 MLT48207075 12 MLT48207080 12 MLT48207085 12 MLT48207092 12 MLT48207096 12 MLT48207097 13 MLT48207412 13 MLT48207413 13 MLT48207430 13 MLT48207431 13 MLT48207435 13 MLT48207441 13 MLT48207451 13 MLT48207453 13 MLT48207457 13 MLT48207459 13 MLT48207471 13 MLT48207473 13 MLT48207474 13 MLT48207477 13 MLT48207481 12 MLT48207490 15 MLT48207497 13 MLT48207602 13 MLT48207604 13 MLT48207607 11 MLT48208800 11 MLT48208801 11 MLT48208805 11 MLT48208806 11 MLT48208810 11 MLT48208811 11 MLT48208812 11 MLT48208816 11 MLT48208817 11 MLT48208821 11 MLT48208822 11 MLT48208825 11 MLT48208830 11 MLT48208831 11 MLT48208840 11 MLT48208841 11 MLT48208845 11 MLT48208846 11 MLT48208854 3 MLT48221990 3 MLT48221996 4 MLT48223079 1 MLT48223102 1 MLT48223104 1 MLT48223106 1 MLT48223123 5 MLT48224040 5 MLT48224041 5 MLT48225006 5 MLT48225012 4 MLT48226100 4 MLT48226101 4 MLT48226330 5 MLT48227125 64 MLT48228200 64 MLT48228310 64 MLT48228315 65 MLT48228320 65 MLT48228424 65 MLT48228425 65 MLT48228426 66 MLT48228430 66 MLT48228435 15 MLT48251002 15 MLT48251122 15 MLT48251252 15 MLT48251372 15 MLT48251502 15 MLT48251752 15 MLT48252002 15 MLT48252122 15 MLT48252252 15 MLT48252562 15 MLT48253001 15 MLT48253621 15 MLT48254125 15 MLT48254621 16 MLT48255120 16 MLT48255125 16 MLT48255140 16 MLT48255150 3 MLT48255220 16 MLT48255275 16 MLT48255420 16 MLT48255425 16 MLT48255440 16 MLT48255450 9 MLT48270501 9 MLT48270621 9 MLT48270681 9 MLT48270751 9 MLT48270811 9 MLT48270871 9 MLT48271001 9 MLT48271121 9 MLT48271251 9 MLT48271371 17 MLT48271401 9 MLT48271501 10 MLT48281020 11 MLT48281030 11 MLT48281040 10 MLT48284001 10 MLT48284006 10 MLT48284011 63 MLT48286870 16 MLT48286880 17 MLT48320221 17 MLT48321500 17 MLT48321700 17 MLT48322100 8 MLT48324006 8 MLT48324403 48 MLT48325031 63 MLT48325032 6 MLT48380010 22 MLT48390510 22 MLT48390518 22 MLT48390520 22 MLT48390528 22 MLT48390530 22 MLT48390538 22 MLT48390572 20 MLT48404105 20 MLT48404108 20 MLT48404112 20 MLT48404515 20 MLT48420120 20 MLT48420140 20 MLT48420220 20 MLT48420240 20 MLT48420540 20 MLT48425300 57 MLT48440405 35 MLT48440410 22 MLT48525030 22 MLT48525040 Table of Contents Part Number Index
64 MLT48553490 62 MLT48591806 62 MLT48591807 62 MLT48591810 62 MLT48591812 62 MLT48591890 56 MLT48591890PS 62 MLT48592401 7 MLT48622000 7 MLT48622020 7 MLT48622030 7 MLT48622040 7 MLT48622046 7 MLT48622050 6 MLT48623040 6 MLT48624075 7 MLT48624079 7 MLT48624085 7 MLT48624091 7 MLT48626015 7 MLT48626020 14 MLT48661370 62 MLT48663080 62 MLT48663240 62 MLT48663280 62 MLT48664020 62 MLT48664040 63 MLT48764008 9 MLT48892803 8 MLT48894633 8 MLT48894680 16 MLT48899221 50 MLT48901009 12 MLT48956085 21 MLT49005324 21 MLT49005414 21 MLT49005614 58 MLT49162712 58 MLT49162713 36 MLT4916BGD3 10 MLT49220071 15 MLT49220130 21 MLT49221129 21 MLT49221131 21 MLT49221132 19 MLT49224025 19 MLT49224088 18 MLT49224095 19 MLT49224142 19 MLT49224800 16 MLT49225100 21 MLT49225403 19 MLT49228300 61 MLT49240146 17 MLT49561123 18 MLT49565625 18 MLT49565645 17 MLT49568000 18 MLT49569000 18 MLT49569010 18 MLT49569020 18 MLT49569030 18 MLT49569045 18 MLT49569050 18 MLT49569075 18 MLT49569085 17 MLT49569105 9 MLT49664419 63 MLT49810020 63 MLT49810030 61 MLT49810040 61 MLT49810090 43 MLT49901900 43 MLT49901959 20 MLT49937805 25 MLT526221 25 MLT526321 25 MLT526821 25 MLT531621 25 MLT531721 43 MLT5317DE 43 MLT5318DE 26 MLT534221 28 MLT537820 24 MLT611731 24 MLT613033 23 MLT614231 26 MLT623221 26 MLT639021 26 MLT650931 27 MLT652321 27 MLT653621 27 MLT653821 27 MLT685220 43 MLT896020 24 MLT8975 24 MLT907020 Table of Contents Part Number Index
MEDINA/CORPORATE 6078 Wolff Rd., Medina, OH 44256 330-725-3451 CLEVELAND 23350 Corbin Dr., Bedford Hts., OH 44128 216-662-7600 ELYRIA 38777 Taylor Parkway, North Ridgeville, OH 44035 440-327-1650 MENTOR 7555 Tyler Blvd., Mentor, OH 44060 440-946-5010 = DESIGN CENTER LOCATION SANDUSKY 2800 W. Strub Rd., Sandusky, OH 44870 419-626-1996 TOLEDO 1425 A Holland Rd., Maumee, OH 43537 419-490-2626 FINDLAY 6000 Fostoria Ave., Findlay, OH 45840 419-425-8511 MARION 1878 Bealer Dr., Marion, OH 43302 740-383-6714 COLUMBUS 4760 Poth Rd., Whitehall, OH 43213 614-421-7017 WOOSTER 565 N. Applecreek Rd., Wooster, OH 44591 330-264-5900 ASHLAND 1212 Wells Rd., Ashland, OH 44805 419-282-0121 MANSFIELD 905 Hickory Lane, Mansfield 44302 419-529-0122 AKRON 1200 Kelly Ave., Akron, OH 44306 330-773-0200 MEDINA
Wolff Bros. Supply, Inc. Services Counter Hours Monday - Friday 7:00 a.m. to 5:00 p.m. Saturday 7:30 a.m. - 11 :00 a.m. Closed Saturday except Wooster & Mansfield QUALITY WHOLESALE DISTRIBUTION Electrical, Lighting, DataCom, Plumbing, Kitchen & Bath Cabinetry, HVAC Equipment, Tools, Fasteners & Chemicals The First Choice Of Professionals! A business to business portal for Wolff Bros. Supply, Inc. customers. WolffNet Online order & account access www.wolffbros.com Paws for News Events Promotions Sales Training Classes Akron Ashland Cleveland Columbus Elyria Findlay Mansfield Marion Medina Mentor Sandusky Toledo Wooster www.wolffbros.com