LASER BLADE DOWNLIGHT - NEW CONSTRUCTION WITH HOUSING - INTEGRAL

Similar documents
LASER BLADE DOWNLIGHT - NEW CONSTRUCTION WITH HOUSING - INTEGRAL

LASER BLADE DOWNLIGHT - NEW CONSTRUCTION WITH PLASTER FRAME - REMOTE

LASER BLADE DOWNLIGHT - NEW CONSTRUCTION WITH HOUSING - REMOTE

LASER BLADE WALL WASHER - NEW CONSTRUCTION WITH HOUSING - INTEGRAL

LASER BLADE WALL WASHER - NEW CONSTRUCTION WITH HOUSING - REMOTE

LASER BLADE XS. Power input: 7.5 to 31.5W (system wattage) Lumens: 150 to 750lm (for 3000K, 90CRI) Luminaire efficacy: Up to 23lm/W.

LASER BLADE XS. Luminaire characteristics:

Luminaire characteristics: Source: Lumen maintenance: Optics: Material: Mounting: Electrical: Dimming: Finish: Weight: Warranty: Ratings:

STUDIO. Luminaire characteristics: Power input: 12.5W to 49W Lumens: 1300 to 4600lm (for 3000K, 80CRI) Luminaire efficacy: Up to 107lm/W.

ROUND SQUARE E DOLOGY.COM S P E C I F I C AT I O N S H E E T SPECIFICATION SHEET ROUND&SQUARE TRIM&TRIMLESS FIXED. Project name: Type:

Type: Project : Luminaire characteristics: Source: Lumen maintenance: Optics: Material: Mounting: Electrical: Dimming: Finish: Weight: Warranty:

6DS 6 Downlight Square

4DS 4.5 Downlight Square

4DS 4.5 Downlight Square

Downlighting. LyteCaster. Complete product = Frame-in kit + Light engine + Trim Order each separately. 3" Accent round adjustable 800 Lumens

PERIMETER - RECESSED. Regressed 3" BMPRLED OPRI ( 1) 14 PRODUCT ID LINEAR OR CORNER QTY TOTAL LENGTH. 3D VIEW - Inside Corner Pattern

PERIMETER - RECESSED. Flush BBPRLED OPRI ( 1) 14 PRODUCT ID LINEAR OR CORNER QTY TOTAL LENGTH. 3D VIEW - Inside Corner Pattern

Downlighting. LyteCaster. Complete product = Frame-in kit + Light engine + Trim Order each separately. 3" Accent round adjustable 800 Lumens

4DR 4.5 Downlight Round

6DR 6 Downlight Round

LINEALUCE MINI RECESSED

WALL MOUNT DIRECT/INDIRECT. Project. Type. Notes

Outputs between listed min and max are available. Consult factory for outputs outside of the listed range.

4DR 4.5 Downlight Round

L10 - L40: 6-5/8 L50 - L60: 7-3/ K K K K. EM/10W 10-watt emergency battery [4] TrimLock.

RECESSED T-Bar & Drywall. Project. Type. Notes 23 15/16" 23 7/8" SIDE VIEW. culus Listed Type I.C.

2 1/2. Applies to both UP & DOWN. Specify quantity. Requires 8" blank See integrated controls guide for more details.

L10 - L40: 5-3/4 L50 - L60: 6-1/ K K K F OF 1/2. 65 Open. CG Champagne gold anodize for shower. 45 Open

SURFACE - LINEAR - FLUSH

RECESSED ASYMMETRIC MOUNT. Project. Type. Notes TECHZONE TM AND LOGIX TM COMPATIBLE

6-1/4. Adjusts from 1/2 min. to 5/8 max. Pan size: 8 1/2 x 12 9/16 SERIES TRIM TYPE ADJUSTMENT LUMENS [1] CRI CCT DISTRIBUTION.

Cubic SurroundLite TM

L10 - L40: 6-5/8 L50 - L60: 7-3/ K K K F. 65 Open. SPC Clear specular anodize for shower

SURFACE FLUSH FLUSH 5 1 / / /4 2 1 /16

WALL LO-OUTPUT. Project. Type. Notes

Project. Type. Notes 8' (96") 8' (96") ALL ORDERS MUST BE SUBMITTED WITH DRAWINGS INDICATING DIMENSIONS, ANGLES AND DIAMETER

Project name. Qty. Output (nominal lumens) Colour and colour temperature. Optics (nominal distribution) Narrow spot 10, Narrow 20, Medium 40

2-115-T Aqua BRO FEATURES

P15 - P44: 5-3/4 P62: 6-1/2. SCA Sloped ceiling TrimLock K K K K TW Tunable white (80 CRI, 2700K 5000K) 65 Open

Downlighting. LyteCaster. Complete product = Frame-in kit + Light engine + Trim Order each separately. 3" Accent square downlight 800 Lumens

Ardito LED - A2RSF SPECIFICATION SHEET. 2-1/2" Series. Ultra-Thin Profile Round Regressed Shower Trim SPECIFICATIONS

PENDANT DIRECT-INDIRECT. SO or MSO PRODUCT ID LIGHT ENGINE NOMINAL LUMENS/FT (#/#) CRI COLOR TEMPERATURE SHIELDING

RL530-12W-120V-DIM-FL / RL507-12W-120V-DIM-FL Module LED - Elite Lighting Module LED Lighting Component

NRM2-511 / NRM2-512 / NRM2-518

2-120-T Aurora BRO FEATURES

PENDANT FORMS - DIRECT

Specification Sheet Discreet Nano

Project name. Qty. Output (nominal lumens) Colour and colour temperature. Optics (nominal distribution) Narrow spot 10, Narrow 20, Medium 40

2-520-T Miro XTM FEATURES

1 Eco-Downlight IC Air-Tight Adjustable New Construction Housing Round or Square

ID+ 3.5" x 3.5" 60 cut-off reflector. 50 cut-off reflector. Less than 2.64" low profile housing available.

WOW. SPECIFICATION SHEET PAGE: 1 OF 6 Project name: Type:

Architectural grade at an affordable price. 3 DOWNLIGHTS NDLED RABWEB.COM

LINEAR DOWNLIGHT - PENDANT DIRECT

MEDMASTER DOWNLIGHT Luminaires for Surgical Applications

PRIME PRIME 4 LED ARCHITECTURAL ROUND FLANGED DOWNLIGHT

SURFACE MOUNTED. Project. Type. Notes. culus Listed Type I.C.

Output (nominal lumens) 700 lm, 1000 lm, 1300 lm, 2000 lm, 3000 lm, 4000 lm, 5000 lm. Color and color temperature

Tove. High Performance Linear System Recessed

Reflectors are compatible with respective Marquise II series housings manufactured by Nora Lighting.

PENDANT MOUNT - DIRECT

2-520-T Miro BRO FEATURES

800 TO 9000 LUMEN 8 LED SILENT CEILING DOWNLIGHT HYPERBOLIC OPEN APERTURE L8 SERIES

Tove. High Performance Linear System T-Grid Recessed

Linear. TruGroove Recessed

EXO FAMILY SPECIFICATIONS

2 LED downlight. Discreet styling, bold performance. RABWEB.COM

Remodeler. Complete product = Frame-in kit + Light engine + Trim Order each separately. E ELV dimming 1 120V VA Version A 2 Z V

id + 4.5" Downlight mm Trim ChromaSure: Color consistency resulting in a 2-step MacAdam ellipse across the entire ID+ product line.

Project: Type: USA/CAN LOUVER FINISH AP91 F - / - -

DRD5S Surface Mount LED Downlight General Retrofit Junction Box

Downlighting. LyteCaster. Complete product = Frame-in kit + Light engine + Trim Order each separately

RECESSED T-BAR & DRYWALL. Project. Type. Notes. 0.5 StepLens. StepLens

id + 4.5" x 4.5" Downlight mm Trim ChromaSure: Color consistency resulting in a 2-step MacAdam ellipse across the entire ID+ product line.

Applies to both UP & DOWN. Outputs between listed min and max are available. Consult factory for other lumen packages

4" LED SPECIFICATIONS LOW-PROFILE ADJUSTABLE DOWNLIGHT

WALL MOUNT - DIRECT/INDIRECT

SLIM PENDANT DIRECT. Project. Type. Notes. Ordering Guide PERFORMANCE PER LINEAR FOOT AT 3500K 1 / 8. axislighting.com. Shown with VL optic

2-125-T Deep Aurora BRO

Specification Sheet Soft Nano Tilt

SURFACE ASYMMETRIC MOUNT. Project. Type. Notes

Recessed Square. Downlight. BASYS with LED Light Engine BS4DLED BS4D LED. Type: Project: online Find it Fast 756. IBEW Union Made BASYS LED HOUSING

Linear. TruGroove recessed

Tove. High Performance Linear System Perimeter

LINEALUCE COMPACT SPECIFICATION SHEET RECESSED. Project name: Type: General information

id + 6" x 6" Downlight mm Trim ChromaSure: Color consistency resulting in a 2-step MacAdam ellipse across the entire ID+ product line.

Project. Comments. Prepared by

Linear. TruGroove recessed micro

PENDANT ASYMMETRIC MOUNT - DIRECT. Project. Type. Notes

LAD8R - Remodel 8 LED Architectural Downlight

Remodeler. Complete product = Frame-in kit + Adjustable light engine / Trim Order each separately

DCD2 Recessed LED Downlight Commercial New Construction 4", 6", 8" Aperture

Linear. TruGroove recessed micro

6" Round Downlight. Product Overview Recessed Round Downlight Wattage: 38. Fixture Type. Performance Chart. Electrical Data. 6" Round Downlight

RL430-10W-120V-DIM-FL / RL407-10W-120V-DIM-FL Module LED - Elite Lighting Module LED Lighting Component

PRODUCT SPECIFICATIONS

Cubic SurroundLite TM

LCD4 4 LED Commercial Downlight

LCD6 6 LED Commercial Downlight

LCD8 8 LED Commercial Downlight

Transcription:

DOWNLIGHT - NEW CONSUCTION WITH HOUSING - INTEGRAL Page: of 6 Laser blade offers miniaturized dimensions with high performance acrylic diffuser integrated in a polycarbonate baffle for maximized visual comfort and die-cast aluminum heat sink. The special configuration of this optical system delivers a uniform general emission. Luminaire characteristics: Source: Lumen maintenance: Power input: to 37W (system wattage) Lumens: 50 to 2200lm (delivered for, CRI) Luminaire efficacy: 35 to 60lm/W White LED module (LM-80 tested) 2700K:, : CRI, or, 3500K:, 4000K:. 80% of initial lumens at 50 000 hours (L80) (LM79 tested). Optics: Low luminance: Spot, and Wide optic, with Optibeam technology. Material: Body and heat sink: Die-cast aluminum Reflector and Baffle: Thermoplastic Housing: Galvanized steel Mounting: New construction housing or Chicago plenum rated housing, both suitable for insulated ceiling. Electrical: Integral high efficiency electronic power supply, rated at 50 000 hours. Finish: See finish options on page 6. Weight: 0. to 2.42lb (0.05 to kg) Warranty: 5 year limited warranty. Ratings: IP20 Certification: culus listed for damp location

DOWNLIGHT - NEW CONSUCTION WITH HOUSING - INTEGRAL Page: 2 of 6 DIMENSIONS IM () 6¼" (43mm) " (280mm) ¾" (44mm) 5⅞" (48mm) 2⅞" (73mm) ¾" (44mm) BOTTOM VIEW IMLESS () 5⅝" (396mm) 0⅜" (264mm) ¼" (30mm) 5¼" (32mm) ¼" (30mm) 2¼" (58mm) BOTTOM VIEW

DOWNLIGHT - NEW CONSUCTION WITH HOUSING - INTEGRAL Page: 3 of 6 PHOTOMEIC DATA Visit www.iguzzini.com/us for complete photometric data. LOAD CCT (W) (K) W CRI OPTIC LUMENS EFFICACY MAX CANDELA (lm) (lm / w) (cd) 55 34 525 I.MK46 53 055 I.MK48 MODELS 32 88 33.0 2.3 4.7 8.26 353 5.29 5.7 442 3.67 77 6W 265 6.8 530 - CRI - 32-35 264 83 66. 2.3 29.4 6.5 733 0.6 5.7 97 7.34 367 550 6.8 00 - CRI - 32-3W Spot 725 56 7 780 I.P29 / I.P37 735 57 2 520 I.MK50 / I.MK37 Wide 765 59 345 I.MK5 / I.MK38 968 0.4 492 0.9 29.3 3 950 2 633 23 5 267 78.7 6 583 54.7 2.7 7 0 337 630 433 58 867 70. 300 39.4 733 25.2 5.6 2 67 7.5 6.7 2 600 - CRI - 32-233 84.2 3.5 37.4 5.3 2 7.0 933 3.5 8.8 67 9.36 37 - CRI - 2 - Spot 467 700 0.6 - CRI - 48 - Wide 400 CCT options 2700K 3500K 4000K* CRI options CRI Multiplier 0.94 *4000K ONLY AVAILABLE IN WIDE FOR, and

DOWNLIGHT - NEW CONSUCTION WITH HOUSING - INTEGRAL Page: 4 of 6 PHOTOMEIC DATA Visit iguzzini.com/us for complete photometric data. LOAD CCT (W) (K) 25.5W CRI OPTIC LUMENS EFFICACY MAX CANDELA (lm) (lm / w) (cd) MODELS Spot 455 57 5 730 I.P32 / I.P40 470 58 5 040 I.MK53 / I.MK40 Wide 525 60 2 695 I.MK54/ I.MK4 3 936 0.4 984 0.9 437.3 5 333 8 000 246 3 333 09 2.7 6 000 68 3.5 74.9 5.3 35 40 850 700 2 550 78.8 3 400 50.4 5.6 4 250 35.0 6.7 5 00 - CRI - 32-467 933 400 42. 7.0 867 27.0 8.8 2 333 8.7 0.6 2 800 - CRI - 48 - Wide 37W - CRI - 2 - Spot 674 26 0 667 2 667 57 Spot 2 80 59 23 65 I.P35 / I.P43 2 205 60 7 565 I.MK56 / I.MK43 Wide 2 2 62 4 040 I.MK57 / I.MK44 5 4 0.4 476 0.9 656.3 2 000 8 000 369 6 000 20 000 64 2.7 24 000 0 473 20 267 2 533 3 800 8 5 067 75.7 5.6 6 333 52.5 6.7 7 600 - CRI - 32-683 253 3.5 367 2 5.3 2 050 63.2 7.0 2 733 40.4 8.8 3 47 28. - CRI - 2 - Spot 89 4 000 236 0.6 - CRI - 48 - Wide 4 00 CCT options 2700K 3500K 4000K* CRI options CRI Multiplier 0.94 *4000K ONLY AVAILABLE IN WIDE FOR, and

DOWNLIGHT - NEW CONSUCTION WITH HOUSING - INTEGRAL Page: 5 of 6 INSTALLATION OPTIONS New construction housing, suitable for insulated ceiling or Chicago Plenum (with integral power supply) H Housing with hanger bars system for new construction installations. Suitable for insulated ceiling or Chicago Plenum applications. Housing and trim can be shipped separately. B Ceiling thickness: Trim: ⅛" to ⅛" (3mm to 29mm) Trimless: ⅝" (6mm) D A C New Construction Housing Chicago Plenum Housing BI50 BI50A BI59 BI59A BI502 BI502A BI520 BI520A BI525 BI525A BI526 BI526A BI504 BI504A BI508 BI508A ⅜" x 5½" (35 x 4mm) ½" x 0¾" (37 x 274mm) ⅜" x 0⅝" (35 x 27mm) BI505 BI505A ½" x 6" (37 x 406mm) BI509 BI509A ⅜" x 5⅞" (35 x 404mm) Model Cut-out dimensions Overall dimensions (AxB) Cut-out position (C) ⅜" x ⅜" (35 x 35mm) 6½" x ½" (66mm x 292mm) 3⅝" (93mm) ⅜" x 2½" (35 x 64mm) 5⅞" x ¼" (49mm x 286mm) 6¼" (59mm) 6½" x ⅝" (66mm x 295mm) 7⅜" (87mm) 6⅞" x 8⅛" (73mm x 460mm) 8⅞" (225mm) 9⅜" x 28¼" (238mm x 76mm) 3" (330mm) ½" x 5½" (37 x 4mm) Hanger bars (D) Clearance (H) 9" to 5¼" (229 to 387mm) with extensions 5" to 26" (38 to 660mm) 4⅞" (82mm) 4¼" to 26" (362 to 660mm) with extensions 2½" to 35" (546 to 889mm) 7⅛" (82mm)

DOWNLIGHT - NEW CONSUCTION WITH HOUSING - INTEGRAL Page: 6 of 6 ORDERING INFO - - FIXTURE RESET - MODEL OPTIC * ** 4000K, 3500K, I.MK45 I.P47 I.MQ75 I.MT9 I.P482 I.MT92 I.MK47 I.P472 I.MQ76 I.MT93 I.P483 I.MT94 I.P473 I.P30 WIDE I.MK49 WIDE I.MK36 WIDE I.MK52 WIDE I.MK39 WIDE I.MK55 WIDE UNV - 20-277V VOLTAGE FINISH I.MK42 3 - White/White D0-0-0V I.MK46 I.MM75 I.MM83 I.MK48 I.MM76 I.MM84 I.P29 I.P3 I.P474 I.MQ80 I.MK50 I.MM77 I.P475 I.MQ8 I.MK5 I.MM78 I.P484 I.P38 I.P37 I.P39 I.P485 I.MQ89 I.MK37 I.MM85 I.P486 I.MQ I.MK38 I.MM86 I.P476 I.P33 I.P32 I.P34 I.P477 I.MQ82 I.MK53 I.MM79 I.P478 I.MQ83 I.MK54 I.MM80 I.P487 I.P4 I.P40 I.P42 I.P488 I.MQ9 I.MK40 I.MM87 I.P489 I.MQ92 I.MK4 I.MM88 I.P479 I.P36 I.P35 I.P8 I.P480 I.MQ84 I.MK56 I.MM8 I.P48 I.MQ85 I.MK57 I.MM82 I.P4 I.P44 I.P43 I.P45 I.P49 I.MQ93 I.MK43 I.MM89 I.P492 I.MQ94 I.MK44 I.MM Gold baffle Black baffle Black chrome baffle 02 - Black/Black 4 - Gold E6 - Black Chrome 0 - White/Black 4 - White/Gold E7 - White/Black Chrome 0 - Gray/Black DIMMING 2700K,, CRI 20-20V White baffle (Trim / Baffle*), *Custom baffle finish available in RAL colors Minimum qty 00 pieces. LTE - Leading(IAC) and trailing edge (ELV) *: 20V only, no dimming. **: 20-277V and dimming 0-0V only. MOUNTING MOUNTING BI50 BI59 BI502 BI520 BI525 BI526 BI504 BI508 BI505 BI509 BI50A BI59A BI502A BI520A BI525A BI526A BI504A BI508A BI505A BI509A