Parts Manual Port A Scrub 14 with Power Pack MODEL M14BQP (Battery)
Introduction Preface Please be advised explicitly that we cannot accept any legal issues out of the contents of this manual. If repair work has to be performed make sure that only genuine spare parts are used; only genuine spare parts may guarantee a dependable machine. We reserve the right for technical improvement.. Valid as of: 05/09 Minuteman International Inc. 14N845 US ROUTE 20 PINGREE GROVE, IL. 60140-8893 U.S.A Proper use The machine is a vacuum scrubbing machine for wet cleaning of hardsurfaced floors. Using the machine beyond this scope of application will be deemed improper use; The manufacturer cannot be held liable for consequential damages; the user alone bears the risk. The term of proper use also includes operation, maintenance and repair work to be performed in compliance with the manufacturer s specifications. The E 24 may only be used by persons that are familiar with the machine and aware of possible hazards involved. If modifications to the machine are made in absence of the manufacturer s prior consent, the latter cannot be held liable for damage resulting from such unauthorized modification. Notes on warranty The terms of the sales contract apply. Damages are not subject to warranty if they are due to non-compliance with the maintenance and service provisions. The maintenance work has to be performed by an authorized Minuteman service center. The following is excluded from warranty: fuses, natural wear, damages caused by overload, inexpert handling and unauthorized modification of the machine. Moreover, any claim for warranty cannot be accepted if damages of the machine are caused by fitting parts or accessories without Minuteman s prior and explicit consent or by noncompliance with the maintenance instructions.
For Safety When Servicing or Maintaining Machine Stop on level surface. Disconnect the power to the machine by pulling the red Battery Connector located under the recovery tank near the batteries. Avoid moving parts. Do not wear loose jackets, shirts, or sleeves when working on machine. Avoid contact with battery acid. Battery acid can cause burns. When working on or around batteries, wear protective clothing and safety glasses. Remove metal jewelry. Do not lay tools or metal objects on top of batteries. Do not clean machine with a pressure washer. Authorized personnel must perform repairs and maintenance. Use Minuteman supplied replacement parts. Page 3
TABLE OF CONTENTS FOR SAFETY WHEN SERVICING OR MAINTAINING MACHINE... 3 CHASSIS ASSEMBLY... 5 HANDLE ASSEMBLY... 6 BRUSH CONTROL ASSEMBLY... 8 BRUSH HEAD ASSEMBLY... 10 VACUUM MOTOR ASSEMBLY 1... 12 VACUUM MOTOR ASSEMBLY 2... 13 SQUEEGEE ASSEMBLY... 14 SQUEEGEE LIFTING ASSEMBLY... 16 WATER FEED ASSEMBLY... 18 TANK ASSEMBLY... 19 BRUSH HEAD MOUNTING ASSEMBLY... 21 ELECTRIC ASSEMBLY 1... 22 ELECTRIC ASSEMBLY 2... 23 COVERING ASSEMBLY... 24 POWER TROLLEY ASSEMBLY... 25 LABELING... 27 WARRANTY... 28
CHASSIS ASSEMBLY Chassis group 1 3180105 1 Base Frame Assy 2 3130077 4 Seal - Wheel 3 931756 2 Wheel 4 3130071 4 Bush-Wheel 5 3130038 2 Washer-Main Wheel 6 829306 2 Hex. Soc. CSK. Head Screw SS M6x16 7 931128 2 Cover Wheel 8 931045 1 Hex Soc. Head Pin 9 3130054 2 Bush LH&RH- Pillar Handle 10 931753 1 Knob - Handle 11 3180028 1 Cover Assy - Pillar 12 829203 2 Hex.Soc.CSK. Head Screw SS M5x10 13 3130062 1 Lifting Handle-Frame 14 921066 2 Optional Washer 15 844081 2 Washer 8.4x16.0x1.6 16 802407 2 Hex Head Screw M8x16 17 3180154 1 Battery Holder Assy Page 5
HANDLE ASSEMBLY Page 6
HANDLE ASSEMBLY Handle group 1 818104 2 CR Pan Head-SS M4x12 2 828210 4 Hex Soc Csk Hd Screw-SS M5x35 3 829203 1 CR CSK Screw SS M5x10 4 829306 2 Hex Soc Csk Hd Screw-SS M6x16 5 837208 3 Self Tap Screw 4.8x25 6 837210 2 Self Tap Screw 4.8x13 7 845052 2 Washer SS 304 5.2x10x1.6 8 3130143 1 Cap 9 931134 2 Guide Shifter Bottom 10 3130174 1 Switch Cover Bottom 11 931158 1 Guide Rope 12 931166 2 Guide Shifter Top 13 931182 1 Boot Cable 14 931183 1 Bellow Handle 15 931194 2 Grommet Switch Cover 16 931199 1 Plug Handle Cover 17 931819 1 Shifting Lever Assy 18 3180136 1 Switch Cover Top 19 3180029 1 Steering Assy 20 3130147 1 Controller Board 21 3130072 1 Bracket Channel 22 3130144 1 Bracket Controller Board 23 3180016 1 Handle Weldment 24 3180127 1 Main Switch with Connector Page 7
BRUSH CONTROL ASSEMBLY Page 8
BRUSH CONTROL ASSEMBLY Brush control group 1 3180005 1 Housing Brush with Insert assy 2 3180022 1 Housing Assy-Gear Support 3 931171 2 Hinge - Idler End 4 3180009 1 Idler Support Assy Brush 5 831306 3 Hex. Soc.Hd Cap Screw -SS M6X16 6 3180104 1 Brush Motor With Connector 7 925002 2 Drive Belt 425-5M-15-HTD 8 3180028 1 Cover - With Seal 9 831308 2 Hex-Soc-Hd-Cap-Screw M6X25 10 844063 4 Washer 6.4X18X2 11 859068 4 Hex. Nylock Nut - St M6 12 818206 1 CRPH-Screw M5X16 13 831306 1 Hex Soc Hd Cap Screw M6x16 14 844061 2 Washer 6.4X12X1.6 15 838060 1 Domed Cap Nut-SS M6 16 931235 2 Lip-Flash Guard 17 3130024 2 Strip-Flash Guard 18 931172 8 Knob-SQG 19 3180107 1 Geared Motor 20 3130010 4 Stud-Brush Housing 21 845052 1 Washer 5.2X10X1.6 22 3130148 1 Weight Motor 23 831309 2 Hex-Soc-Hd-Cap-Screw M6x30 Page 9
BRUSH HEAD ASSEMBLY 20 21 19 14 15 16 10 17 18 12 9 8 2 7 1 2 3 4 5 34 35 36 23 24 27 26 28 29 31 32 22 25 30 7 13 11 10 33 6 Page 10
BRUSH HEAD ASSEMBLY Brush head group 1 3130006 1 Housing-Gear Support 2 875010 8 Bearing 6003 2RS 3 3180008 4 Sprocket Assy Gear 4 931027 4 Drive Key 5 931815 2 Idler - Plain Assy 6 831307 2 Hex. Soc. Hd Cap Screw - St M6X20 7 875011 2 Bearing 608 2Z 8 931036 1 Gear-LH 9 931035 1 Gear-RH 10 854007 4 O' Ring 36X2.5 11 931129 2 Pulley-Drive 12 925012 4 Washer-Bridge 13 829306 4 Hex-Soc-CSK-Hd-Screw-SS M6X16 14 3130005 1 Cover Idler End 15 931157 2 Spacer-Idler End 16 3130075 2 Idler Pulley - Brush 17 845101 2 Washer-SS-304 10.5X20X2 18 838100 2 Domed Cap Nut-SS M10 19 854008 1 Oring 6X2.0 20 931758 1 Knob Idler Cover 21 3130042 2 Pin-Idler End 22 3130066 1 Bracket-Parking W heel 23 837207 2 Self Tapping Screw 4.8X16 24 881041 1 Circlip Internal Light B22 25 3130035 1 Pin-Parking Stand 26 3180024 1 Bracket-Castor 27 925129 1 Circlip E6.0 (Type C) 28 3130021 1 Washer-Castor 29 829203 1 Hex-Soc-CSK-Hd-Screw-SS M5X10 30 3130067 1 Knob-Parking W heel 31 3130043 1 Wheel-Parking 32 3130034 1 Pin-Wheel 33 3180023 1 Parking W heel Kit NOT SHOWN 34 931892 2 Brush (PA / Blue) 35 931893 2 Brush (PP / Black) 36 931894 2 Brush (SIC / Grey) Page 11
VACUUM MOTOR ASSEMBLY 1 Vacuum motor group 1 836206 4 CRPH Self Tapping Screw - SS 3.5X16 2 845039 4 Washer - SS 4.0X8.0X0.5 3 931132 1 Guide - Float 4 931810 1 Float 5 931196 1 Gasket - Float 6 931850 1 Hose Assy - Vacuum 7 931851 1 Hose Assy - Collection 8 3180111 1 Vacuum Motor Sub Assy 9 931204 2 Gasket - Lip 10 3180044 1 Hose Assy SQG Group 11 3130064 2 Clamp Hose 12 844052 4 Washer 5.2X10X1.6 13 837208 4 CRPH Self Tapping Screw Steel (Form F) 4.8x25 14 931191 2 Lip - Valve 15 3130027 2 Clamp Bellow SQG 16 931184 2 Bellow - Sqg 17 931054 6 Ring - Bellow 18 844043 2 Washer - SS 4.3X12X1.0 19 818104 2 CRPH Screw M4X12 Page 12
VACUUM MOTOR ASSEMBLY 2 Vacuum motor assembly 1 3130046 1 Hsg Bottom - V.M 2 931197 2 Gasket - V.M 3 3180112 1 V.M with Connector Assy 4 3130047 1 Hsg Top - V.M 5 845052 10 Washer - SS 304 5.2X10X1.6 6 837210 10 Self Tap Screw 4.8X13 7 881044 1 Carbon Brush Set Page 13
SQUEEGEE ASSEMBLY Page 14
SQUEEGEE ASSEMBLY Squeegee group 1 3130051 2 Body Sqg 2 931170 2 Valve Top 3 931126 2 Valve Bottom 4 832213 2 Hex. Soc. Hd Cap Screw - SS M5X50 5 931233 2 Lip - Sqg. Inner 6 931224 2 Lip - Sqg. Outer 7 3130022 4 Strip - Lip Sqg 8 931172 20 Knob - Sqg 9 3180012 4 Squeegee Rod Sub Assy 10 3130048 4 Guide - Pillar Sqg 11 931175 4 Bush Top - Pillar Sqg. 12 931050 4 Pin 10 - Pillar Sqg 13 3130049 4 Bush Bottom - Pillar Sqg 14 931251 4 Spring - Pillar Sqg. 15 3130063 4 Locking Clip-SQG Pillar 16 931146 4 Deflector - Roller 17 931147 4 W asher - Deflector 18 841106 4 CSK-Self-Screw 4.2x16 19 931841 4 W heel - Sqg. Assy 20 837210 8 CRPH-Self-Screw-SS 4.8X13 21 845052 4 W asher - SS 5.2X10X1.6 22 Reference Only 1 Suction Valve Page 15
SQUEEGEE LIFTING ASSEMBLY Page 16
SQUEEGEE LIFTING ASSEMBLY Squeegee lifting 1 931181 4 Clip - Clamp 2 931051 4 Pin 6 - Pillar Sqg 3 3180013 1 Squeegee Front 4 3180014 1 Squeegee Rear 5 931804 1 Cable Assy - Squeegee 6 3180027 1 Sqg Rod Assy - Front 7 3180026 1 Sqg. Rod Assy - Rear 8 831323 2 Hex. Socket Head Cap Screw - St M6X18 9 3130053 4 Bush-SQG 10 931109 1 Link - 75 11 844061 7 W asher - St 6.4X12X1.6 12 859068 4 Hex. Nylock Nut - St M6 13 828208 1 Hex-Soc-CSK-Hd-Screw M5X25 14 3130052 1 Bush9.8-SQG 15 931107 1 Link - 50 16 3130061 1 U Bracket - Stud 17 822058 3 Hex-Nut M5 18 3130018 1 Stud - Link Adj 19 822068 4 Hex-Nut M6 20 3130019 1 Connector - Link 21 931252 1 Hook - Spring 22 803308 1 Hex Head Screw M6X25 23 931819 1 Shifting Lever Assy Page 17
WATER FEED ASSEMBLY Water feed system 1 931142 1 Holder - Nozzle 2 931198 1 Washer - Nozzle 3 931816 1 Nozzle Assy 4 931143 1 Nut - Nozzle 5 3130076 2 Bracket - Pump 6 3130140 1 Vibrating Pump 24V 7 3130116 1 Hose - Nozzle 8 3180115 1 Pump Kit 24V 9 931290 1 Hose - Pump 10 928062 1 Body-Filter 11 928063 1 Filter 12 3130074 1 Cap-Filter 13 931809 1 Filter Assy Page 18
TANK ASSEMBLY Page 19
TANK ASSEMBLY Tank group 1 3130117 1 Bottom Housing 2 931125 1 Cap - V.M 3 931144 1 Yoke Hinge - Lid (Right) 4 836210 12 CRPH Self Screw-SS 3.5X16 5 931162 1 Yoke Hinge - Lid (Left) 6 3130068 2 Mounting Plate - Bot. Hsg 7 836004 8 CRPH Self Screw - SS 3.5X13 8 931159 2 Bracket - Housing 9 812104 4 CRCSK Screw - St M4X12 10 3180057 1 Bottom Housing Assy 11 3130119 1 Tank - Fresh 12 3130060 1 Handle - Fresh 13 3130050 4 Spacer - Tank 14 3180059 1 Tank - Fresh assy 15 3130118 1 Tank - Collection 16 3130058 1 Handle - Collection 17 931203 1 Cap - Collection Tank 18 3180058 1 Tank - Collection Assy 19 931216 1 Lid 20 931145 2 Hook Hinge - Lid 21 931156 2 Hose Guide 22 931265 1 Gasket - Fresh 23 3130126 1 Gasket - Collection 24 3180118 1 Holder Float Assembly 25 3180133 1 Top Cover Assy 26 845039 6 W asher -SS 4.0X8.0X0.5 27 836004 2 CRPH Self Tapping Screw-SS 3.5X9.5(DIN 7981) 28 836209 4 CRPH Self Screw-SS 3.5x18 Page 20
BRUSH HEAD MOUNTING ASSEMBLY Brush head mounting group 1 3130040 4 Support Plate-Housing 2 844061 4 Washer 6.4X12X16 3 831307 4 Hex Soc Hd Cap Screw M6X20 4 845041 2 Washer-SS 4.3X9X0.8 5 818105 2 CR Pan Head-SS M4X15 6 3130207 1 Edge Protector B10 Page 21
ELECTRIC ASSEMBLY 1 Electric 1 1 829203 2 CR CSK Screw M5X10 2 841106 4 CSK-Self-Screw 4.2x16 3 3130146 1 Relay Mounting Bracket Top 4 836210 3 CRPH Self Screw 3.5x25 5 3180122 1 Relay Board Assy 6 3130145 1 Relay Board Mounting Bracket 7 932023 1 Fuse Holder 50 8 817206 2 CR Pan Head SS M5X16 9 3180128 1 Battery Plug Assy Male 10 931123 1 Bracket Capacitor 11 3180123 1 Data Cable Assy 12 841103 2 CR CSK HD Screw ST 4x10 13 3130198 3 Channel Relay 14 825004 3 CRPH Self Screw 3x12 15 844039 3 W asher 4x8x0.5 16 844111 3 W asher 3.5x7.0x0.5 17 3130206 3 Rubber Bush Page 22
ELECTRIC ASSEMBLY 2 Electric 2 1 3130017 1 Fuse 1A 2 3130208 1 Fuse 35A 3 932025 1 Fuse 25A 4 932026 1 Fuse 5A 5 932024 1 Fuse 50A 6 3180124 1 Fuse Link Cable 7 3180125 1 Cable Assy BM 8 3180126 1 Cable Assy VM 9 3180129 1 Cable Assy Pump 10 3170020 1 Sticker Panel 14B 11 3130173 1 Ferrite Vacuum Motor 12 3130172 1 Ferrite Brush Motor Page 23
COVERING ASSEMBLY Covering assembly 1 925012 2 Washer-Bridge 2 829307 2 Hex Soc CSK Hd Screw-SS M6X20 Page 24
POWER TROLLEY ASSEMBLY Page 25
POWER TROLLEY ASSEMBLY Power trolley 1 01177330 1 Hood 2 01072060 1 Seal 3 01072050 1 Inspection glass 4 01177340 4 Screw 5 01006820 4 Lens flange screw 6 01177350 2 Battery 7 01177360 1 Sheet metal 8 00021130 2 Hex.bolt 9 00053760 2 W asher 10 01077810 2 Fixed castor 11 01177370 2 Threaded sheet metal 12 01177380 1 Battery cable 13 01172940 1 Tension band 14 00053290 2 Hexagon screw 15 01177550 1 Charging cable 16 01177790 1 On-board charger - USA 17 00121010 3 Cable tie 18 00555440 1 Cable sleeve 19 01079690 1 Bushing 20 01177390 1 Console 21 01177800 2 Sealing Plug 22 01078240 8 W asher 23 00694770 1 Lens cap 24 00053730 4 W asher 25 00051520 2 Hexagon nut Page 26
LABELING Labeling 1 00504370 2 Blind rivet 2 01131570 1 Lable high-pressure cleaner 3 01073780 1 Nameplate 4 01071710 1 Decal "Instruction manual" 5 17267550 1 Protection Decal Page 27
Minuteman International Made Simple Commercial Limited Warranty REVISION O EFFECTIVE 4/1/2016 Minuteman International, Inc. warrants to the original purchaser/user that the product is free from defects in workmanship and materials under normal use. Minuteman will, at its option, repair or replace without charge, parts that fail under normal use and service when operated and maintained in accordance with the applicable operation and instruction manuals. All warranty claims must be submitted through and approved by factory authorized repair stations. This warranty does not apply to normal wear, or to items whose life is dependent on their use and care, such as belts, cords, switches, hoses, rubber parts, electrical motor components or adjustments. Parts manufactured by Minuteman are covered by and subject to the warranties and/or guarantees of their manufacturers. Please contact Minuteman for procedures in warranty claims against these manufacturers. Special warning to purchaser -- Use of replacement filters and/or pre-filters not manufactured by Minuteman or its designated licensees, will void all warranties expressed or implied. A potential health hazard exists without original equipment replacement. All warranted items become the sole property of Minuteman or its original manufacturer, whichever the case may be. Minuteman disclaims any implied warranty, including the warranty of merchantability and the warranty of fitness for a particular purpose. Minuteman assumes no responsibility for any special, incidental or consequential damages. This limited warranty is applicable only in the U.S.A. and Canada, and is extended only to the original user/purchaser of this product. Customers outside the U.S.A. and Canada should contact their local distributor for export warranty policies. Minuteman is not responsible for costs or repairs performed by persons other than those specifically authorized by Minuteman. This warranty does not apply to damage from transportation, alterations by unauthorized persons, misuse or abuse of the equipment, use of non-compatible chemicals, or damage to property, or loss of income due to malfunctions of the product. If a difficulty develops with this machine, you should contact the dealer from whom it was purchased. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. Some states do not allow the exclusion or limitation of special, incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions and limitations may not apply to you. Model Parts Labor Poly Travel** Cord Electric Group 5yrs 3yrs 12yrs 90 days Battery Operated Group 5yrs 3yrs 12yrs 90 days Exceptions. Model Parts Labor Poly Travel** Port A Scrub, all models 1yr 6months 12yrs 90 days A3S Blower 1yr 1yr 0 0 Phenom Dual Motor Upright Vacuums 2yrs 2yrs 0 0 Explosion Proof Vacuum 1yr 1yr 0 0 Propane Burnisher 1yr 1yr 0 90 days **Travel, 2 hours max Stand-alone Battery Chargers: Replacement Parts: Batteries: Polypropylene Plastic Tanks: One year Ninety days 0-3 months full replacement, 4-12 months pro-rate 12yr warranty, no additional labor 14N845 U.S. Route 20 Pingree grove, IL 60140 Phone: 800-237-3192 E-Mail: www.minutemanintl.com 988733B Rev A 07/16