Main Plant Kamimine Plant Kishima Plant Hirokawa Plant Yamada Plant TOKU PNEUMATIC CO., LTD. 34, 4Chome, Katakasu, Hakataku, Fukuoka, Japan Phone : +89243040 Fax : +8924304 email : intop@tokunet.co.jp URL : www.tokunet.co.jp/en Ver 2.0 DISTRIBUTOR. 200~. AM8 20003000FSP Printed on 00% Recycled Paper TOKU PNEUMATIC CO., LTD. FS 8939/ISO 900 EMS 89393/ISO 400 www.tokunet.co.jp/en
ERGONOMIC SOLUTIONS FOR THE FUTURE ERGONOMIC Toku offers a unique and refined technology to reduce vibration and noise levels based on 5 years of actual job site experience. Spring dampened back head removes 50% of the vibration without power reduction. Uniquely designed muffler reduces the noise level by 0dBA compared to a standard tool. ERGONOMIC SERIES ROCK DRILLS ERGONOMIC SERIES PAVING BREAKERS THD00N AV TJ5SV TJ20SV ERGONOMIC SERIES CHIPPING HAMMER THAB AV THA2B AV THA3B AV THA4B AV TPB30SV TPB40SV TPB50SV TPB60SV (RPM) BLOW TYPE TPB30SV TPB40SV TPB50SV TPB60SV 7/8x3/4 or x4/4 x4/4 3(85) 53/4(46) 6(56) 3/4(44.45) 3/4(44) 2/4(57.5),550,00,200,400 35(5.8) 43(9.5) 62(28) 70(3.6) 23/4(592) 26(654) 28(74) 26/4(668) 70(2) NPT NPT NPT THD00N AV 7/8x3/4 /4(3) x7/8(38x22) 3,200(350).4(5.2) 6(420) 28(0.8) TJ5SV TJ20SV 7/8x3/4 or 7/8x4/4 7/8x4/4 3/4(45) 2(49) 2/8(54) 25/8(68) 2,450(250) 2,400(200) 38(7.4) 5(23) 22/4(563) 24(608) 88(2.5) 3/4PT 3/4PT THAB AV 2,500 3(5.9) 55/6(388) 28(0.79) THA2B AV 2(5) 2,300 4(6.2) 6/4(43) THA3B AV 2(64) 2,200 5(6.8) 73/4(450) 32(0.9) THA4B AV 4(02),800 5.5(7) 9(480) 33(0.95) 0 02
PAVING BREAKERS & TRENCHER TPB TRC High technology to front head design provides excellent durability and low maintenance cost. Alloy steel forgings provide maximum durability. Four bolt back head design stands up in rugged use. Latch type forged retainer for quick change Noise reduction muffler is optionally available. TRENCHER TPB30 TPB40 TPB60 TPB73 TPB90 TRC30 OPTIONAL MUFFLER TPB30 TPB40 TPB60 TPB73 TPB90 TPB30 TPB40 TPB60 TPB73 TPB90 7/8x3/4 or x4/4 x4/4 3(85) 53/4(46) 55/6(44) 6(52) 3/4(44.45) 3/4(44) 2/4(57.5) 2/4(57.5) 25/8(66.67),550,00,400,200,250 33(5) 40(8) 66(30) 70(3) 92.4(42) 22/4(564) 26(660) 25(645) 273/6(690) 28(723) 70(2) 63(.8) 77(2.2) NPT NPT TRC30 7/8x3/4 or x4/4 3/32(85) 3/4(44.45),550 36(6.3) 29(736) 03 04
RIVET BUSTERS CHIPPING HAMMERS B AA THA Offering 3 type models (7 9 ) for optimum job selection. Both inside and outside trigger handle are available. High technology for best powertoweight ratio Feather touch trigger control helps precise job operation. NEW INSIDE TRIGGER TYPE B70 I B90 I B0 I Compact and lightweight design superior for precise job operation Open handle enables comfortable grip even with safety gloves High BPM performance for most effective productivity NEW AA0S Available in to 4 stroke for best selection in various applications Durable handle design technology based on 30 years of actual job site experience Unique ring valve design for optimum operation in tough applications or dirty environments Available chuck size.680 round or.580 hex THAB THA2B THA3B THA4B B70 B90 B0 RETAINER LOCK SPRING RUBBER BUMPER LOWER SLEEVE UPPER SLEEVE TCH TCD CLAY DIGGERS Heattreated forged body for excellent durability. Noise reduction muffler is optionally available. Dstyle handle for precise control and safe use Latch retainer for quick change TCD20 TCD30 OPTIONAL MUFFLER TCD20 TCD30 Four bolt handle for excellent durability Available in 2 to 4 stroke for best selection in various applications Available chuck size.680 round or.580 hex THALR LONG REACH FLOOR SCALER Ideal for surface cleaning operation such as removing tiles, paint, rubber coating, grout, etc. Also available for roughening concrete/masonry. Powerful design hammer body, yet high BPM's for effective job operation TCH2 TCH3 TCH4 NEW THA2BLR CFM (m 3 /min) CFM (m 3 /min) B70 B90 B0 TCD20 TCD30 or 7/32 7/8x3/4 7/8x3/4 or x4/4 7(88) 9(227) 2(303) 2(60) 3/32(85) 3/6(30.2) 3/6(30.2) 3/6(30.2) /6(42.85) 3/4(44.45) 940 700 680 2,000,550 28(2.9) 32(4.5) 34(5.7) 22(0) 30(3.6) 93/4(500) 23(582) 26(660) 20(520) 22(559) 37(.05) 36(.02) 33() 38(.) NPT AA0S THAB THA2B THA3B THA4B THA2BLR 3/4(45) 2(5) 2(64) 4(02) 2(5) 7/8(22.2) 3,000~3,200 8(3.6) 23/4(320) 23(0.65) NPT 2,500 2,300 2,200,800 2,300 3(5.9) 4(6.2) 5(6.8) 5.5(7) 20(9) 55/6(388) 6/4(43) 73/4(450) 9(480) 58(,470) 28(0.79) 32(0.9) 33(0.95) PT TCH2 TCH3 TCH4 2(50.8) 2(63.5) 4(0.6) 2,600~2,800 2,000~2,200,600~,800 8(8.) 9(8.55) 20(9) 43/4(374.65) 6(406.4) 7(43.79) 3.5(0.89) 33(0.95) 7/824 NPTFemale 7/824 NPTFemale 7/824 NPTFemale 05 06
LIGHT ROCK DRILL lb Toku offers versatile Sand Rammers and Backfill Tampers for various applications. THD Compact and lightweight design with original technology for high powertoweight ratio enables effective productivity in various drilling applications. 3 chuck sizes for various drilling applications (3/4x33/4, 9/6x3/4 and 7/8x3/4) Uniquely designed internal mechanism for excellent durability Screwon retainer for secure operation Shockabsorbing handle is optionally available OPTION ANTIVIBRATION HANDLE THD00N9/NU7/N MEDIUM ROCK DRILL 30lb and 40lb TB SAND RAMMER Compact and lightweight design provides comfortable operation. High bpm mechanism enables most effective production. Ideal for light construction compaction, compressing molds etc. Black oxide cylinder for extra durability and rust prevention Teasing throttle for precise control TB00G TB0G TBN TJ Forged housings and heattreated internal parts for maximum durability Lineoiler is equipped as standard Shock absorbing handle and noise reduction muffler are optionally available (see page 2 for ergonomic series) TJ5 TJ20 OPTIONAL MUFFLER TJ5 TJ20 TF Ideal for heavy compressing application and compacting soil around foundations and other structures Original plate valve system ensures reliable operation. Teasing throttle for precise control Heattreated internal components for excellent durability T BACKFILL TAMPER Wellbalanced, easy to operate by one person Excellent choice for all types of backfill compacting work. Uniquely designed valve plate mechanism reduces kick back from the tool when operating. Heattreated alloy steel cylinders offer superb durability HEAVYDUTY ROCK DRILL 60lb TS Forged housings and heattreated internal parts for maximum durability Builtin oiler for convenience 3 chuck sizes are available Stepless exhaust lever for better hole cleaning TFN TF2N T6 TS55 (RPM) BLOW TYPE BUTT DIA. CFM (m 3 /min) THD00N9 THD00NU7 THD00N 3/4x33/4 9/6x3/4 7/8x3/4 /4(3) /4(3) /4(3) x7/8(38x22) x7/8(38x22) x7/8(38x22) 3,200(350) 3,200(350) 3,200(350).4(5.2).4(5.2).4(5.2) 6(420) 6(420) 6(420) 28(0.8) 28(0.8) 28(0.8) TB00G TB0G TB N 2(65) 3/4(8) 7/8(22),600,000 800 3.7(.7) 6(2.7) 2(5.4) (280) 5(395) 20(50) 2(5.5) 2/8(54) 2(67) 8(0.25) 0(0.3) 22(0.7) (RPM) BLOW TYPE TFN TF2N 5(25) /4(32) 800 700 5(6.8) 9.8(9) 42/8(,070) 43(,05) 2(67) 3(75) 22(0.7) 27(0.85) TJ5 TJ20 7/8x3/4 or 7/8x4/4 7/8x4/4 3/4(45) 5/6(49) 2/8(54) 2/6(68) 2,450(250) 2,400(200) 3(4) 4(8.5) 8(468) 24(60) 87(2.5) 3/4 PT 3/4 PT T6 5(40) (38) 750 40(8) 49(,240) 53/4(46) 35(.) 7/8x3/4, TS55 7/8x4/4 or x4/4 29/6(65) 25/8(66.6),800(200) 60(27) 22(568) 92(2.6) 3/4 PT 07 08
ANGLE GRINDERS RATCHET WRENCHES TAG Heavyduty and lightweight Ideal for cutting concrete/masonry and for surface finish work at steel fabrication, foundry, shipyard etc. 5/8 UNF spindle Safety lockoff throttle lever Type & type 27 grinding wheel are available N NEEDLE SCALERS & FLUX CHIPPERS TFC Compact and lightweight body for comfortable operation Effective in removing old paint and rust in difficult corners Simple valve design for precise throttle control Weld flux chipper can be converted into needle scaler by adding needle scaler attachment (each 200 series and 300 series) 5/64 (3mm) dia. needles as standard for N200 and /8 (2mm) needles is also available for N200 N200 TAG45MLHU TFC300H TN300H TFC200 TFC300H TAG700J MR Ideal for fastening operation in tight space around AC battery, engine, radiator, hyd. pump etc for equipment Unique ratchet head design prevents slipping for MR2207/2209 MI IMPACT WRENCHES Twin hammer mechanism provides quick torque pick up for efficient operation. (MI7HE and MI20P) Handle exhaust design to reduce noise level for MI7HE and MI20P Ultimate power in lefthand direction for MI7HE 360 free rotating exhaust for MI20P One handed easy forward/reverse control valve for MI20P Ergonomic side grip handle design for MI3800/5000 series 2 step throttle for precise control and easy bolt starting for MI3800/5000 series 4 position power regulator for MI3800/5000 series RTYPE Twin Hammer MI7HE SQ MR2207C/2209C /4 & SQ RHTYPE Twin Hammer MI20P 3/4 SQ MR230B/240B & SQ HTYPE One Hammer MI5000P SQ MI3800P SQ TFC200 9 ø2 4 20 20 ø5.5 ø R4 24 27 22 ø9.5 ø2.7 ø4.8 HTYPE One Hammer Short Anvil MI5000GL SQ MI3800GL SQ Inside trigger HTYPE Pin Hammer Inside trigger MI5500GL SQ WHEEL SIZE SPINDLE SIZE MAX. FREE SPEED r.p.m. HEIGHT NET DRIVE BOLT CAPACITY TORQUE RANGE ft lb (Nm) MAX. TORQUE ft lb (Nm) FREE SPEED RPM TAG45MLHU TAG700J N200 TN300H TFC200 TFC300H 4x/4x7/8 7x/4x7/8 3/4(20) 3/4(20) 5/8UNF 5/8UNF (2) (39) (2) (39) 3,000 7,500 2,000 4,500 2,000 4,500 3(9) 425/32(2.6) 3.5(.6) 7.4(3.4) NEEDLE DIA.x xq'ty /8x47/8x2pcs(3x25x2pcs) /8x7x9pcs(3x80x9pcs) 2(0.9) 9(4.3) 7/4(82) 22(57) 8(24) 2(304) 2(.) 9(4.3) 9(0.25) 8(0.5) 35() 46(.3) 87/8(225) 22(57) NPT 09(0.25) 8(0.5) (9.5) NPT MR2207C MR2209C MR230B MR240B MI7HE MI20P MI3800P MI3800GL MI5000P MI5000GL MI5500 /4 3/4 5/6(8) 5/6(8) (0) (0) 5/8(6) 7/8(22) (38) (38) /4(55) 420(628) 420(628) 05(469) 05(469) 80325(245440) 290580(392785) 360,085(490,470) 360,085(490,470) 360,600(4902,60) 360,600(4902,60),0853,00(,4704,200) R400 L435(R540 L590) 725(980),450(,960),450(,960) 2,000(2,650) 2,000(2,650) 4,050(5,500) (0.53) (0.53) 2(.) 2(.) 6(2.5) 9(3.9) 2(9.5) 22(0) 3(4) 35(6) 40(8) 6(65) 6(65) 0(254) 0(254) 7(79) 85/8(220) (276) 20(504) 2/4(30) 23(594) 20(520) 250 250 80 80 5,500 5,000 4,700 4,700 3,700 3,700 2,800 2(0.35) 2(0.35) 6(0.45) 6(0.45) 2(0.6) 35() 57(.6) 57(.6) 67(.9) 67(.9) 44(.25) NPT (9.5) (9.5) 09 0