TAPWARE Product Guide ZURN.COM.AU
PRODUCT CODE Z-80300 / Z-86100 CONTENTS TIMED FLOW TAPWARE TIMED FLOW TAPWARE 3 SPRING ACTION TAPS 4 DRINKING BUBBLERS 5 GLASS FILLERS 6 SHOWER ROSE 8 SHOWER TIMER 9 HANDSFREE OPERATED TAPWARE 10 PEDAL VALVES 12 URN TAP 16 TWIST WASTE VALVE 17 WASHDOWN GUN 18 AQUALISA TIMED FLOW CONTROL KIT 19 COMMERCIAL KITCHEN TAPWARE 20 Z-80300 WM-021242 1.5 The timed flow taps are built to last. With solid DZR Brass construction these taps will suit any facility. 6 star WELS rating make these taps top of the range. > Timed flow > 150 350kPa inlet water pressure > 0 60 C water temperature > WELS 6 star 1.5L > WaterMark Approved - Z-86100 1.5 Wall Bib Tap (Z-80300) Pillar Tap (Z-86100) *Pillar taps also available with complete installation kit WM-021242 3
SPRING ACTION TAPS DRINKING BUBBLERS TOP ASSEMBLIES: ST-12 DF-210 DF-215 GSAI-16 4.5 ST-12L The tapware range is perfectly suited for any commercial design layout. > Spring action, self closing > Dezincification chrome plated brass bodies and internals > 350kPa max. inlet water pressure > 75 C max. water temperature 3 GSAI-16L DF-260B DF-260 These drinking bubblers were designed with safety and strength in mind. All bubblers come standard with rubber coated mouth piece for user protection. Bubblers in this range are easy to use and suitable for any age group. > 0 50 C water temperature > 150-500kPa inlet water pressure > 6 star WELS ratings > WaterMark Approved DF-240B DF-260 - WELS 6 star 2.5L - GSAI-16 - push button spring action tap GSAI-16L - lever spring action tap GSAI-13L - lever horizontal spring action tap 3 GSAI-13L DF-240 2.5 DF-240 - WELS 6 star 2.5L - DF-215 DF-210 OPTIONS: DF-240B / DF-260B - button type 4 5
PRODUCT CODE DF-230 PRODUCT CODE B-1210 / B-1200 VERTICAL GLASS FILLER MOUNTED GLASS FILLERS 110mm 40mm 230mm 200mm 15mm BSP 55mm B-1210 This vertical glass filler is perfectly suited for any commercial design layout. > 7/6-24 TPI > 1/2 Male Adaptor available These T&S Mounted Glass Fillers are polished chrome with adjustable cover plates. B-1210 is pedestal mounted with 15mm male inlet and a height of 230mm whilst B-1200 is wall mounted with a 10mm female inlet. Perfectly suited for any commercial design layout. > 350kPa max. inlet water pressure > 60 C max. water temperature MODEL: DF-230 - Vertical glass filler 115mm B-1200 51mm FEATURES: > Polished chrome > Adjustable cover plate > Volume regulator > Lexan push-back arm > 350kPa max. inlet water pressure > 60 C max. water temperature 10mm BSP Female Inlet 100mm Note: All dimensions are for reference only. Do not use for pre-plumbing B-1210 - Pedestal mounted glass filler B-1200 - Wall mounted glass filler 6 7
1 MIN 10 MIN 1 MIN 10 MIN PRODUCT CODE LWG-CS9 PRODUCT CODE LWG-ST SHOWER ROSE SHOWER TIMER This shower rose is designed for the harshest environments and installations. It is jail safe and suitable for prisons, holding cells, institutional facilities and heavy vandal prone areas. > Flow controlled to 9L/min > Removeable spray plate for cleaning > Ligature resistant > Vandal Resistant > Ideal for prisons and public showers > 60 C max. water temperature > WELS 3 star 9L > WaterMark Approved - WM-022449 MODEL: LWG-CS9 - Shower rose 9 WM-022449 1800mm 1200mm 650mm Solenoid Button OFF TIME C ON TIME Shower head Power Pack The button is used to activate the shower timer. Once the button is pushed the shower timer sends a signal to the solenoid. This process will alter the timing and lock out of water according to the setting on the shower timer. WM-022449 9 The shower timer is a water control product that can manage the amount of time a user can have a shower and the amount of time required before it can be activated again. Suitable for prisons, holding cells, institutional facilities and public areas. > Adjustable run time 1 10 min > Adjustable Lock out or Dead time 1 10 min > 60 C max. water temperature > WELS 3 star 9L > WaterMark Approved - WM-022449 LWG-ST - Control unit, power pack, ½ solenoid valve, low voltage piezo button LWG-STKIT - Control unit, power pack, ½ solenoid valve, low voltage piezo button, anti-vandal resistant showerhead 8 9
PRODUCT CODE TF-735G PRODUCT CODE GSAI-25X KNEE OPERATED TAPWARE FOOT OPERATED TAPWARE GSAI-25XA 2.5 The knee operated valve is part of our hands free tapware range. These valves are extremely robust and long lasting. These are a timed flow valve which can be held in the on position to allow the user a greater amount of time. Hygienic hands free activation for use in hospitals, kitchens and laboratories. > 15mm BSP inlet and outlet > 7 second run time (factory set) > 0 60 C water temperature > 150 350kPa inlet water pressure > WELS 5 Star 5.5L > Watermarked Approved - TF-735G - Knee operated valve with WELS approved gooseneck outlet TF-735KIT - Knee operated valve with WELS approved gooseneck outlet and installation kit 5.5 0088 TF-735KIT GSAI-25XS The foot operated valve range is designed for the harshest of environments. These valves are the easiest and most economical way to go hands free. Available in both 45 degree and straight configurations, valve only or with a complete installation kit. > 15mm BSP inlet and outlet > Spring action > 0 70 C water temperature > 150 300kPa inlet water pressure > WELS 6 Star 2.5L > Watermark Approved - GSAI-25XA GSAI-25XS GSAI-25XAKIT GSAI-25XSKIT 45deg foot valve only Straight foot valve only 45deg foot valve with installation kit Straight foot valve with installation kit 10 11
PRODUCT CODE B-508 PRODUCT CODE B-504 SINGLE WALL MOUNTED PEDAL VALVE DOUBLE WALL MOUNTED PEDAL VALVE The single wall mounted pedal valve has a brass body with a polished chrome plated finish. It can be used for hot or cold water. > Wall mounted > Extended pedal > Aluminium pedal with satin finish > Pedal flips upward for ease of cleaning PRODUCTS: B-508-K - Single pedal valve, wall mount w/ gooseneck outlet B-50P - Repair Kit to suit B-502, B-504, B-507 and B-508 3 5/8 [92mm] 2 3/4 [70mm] 2 5/16 [59mm] 1 15/16 [49mm] 1 3/4 [44mm] 1 [25mm] 1 [25mm] 1 15/16 [49mm] WALL 2 5/8 [67 mm] 2 5/8 [67mm] IN OUT 8 3/4 Min [222mm] (See note 1) 2 1/4 [57mm] 1/4 Dia. Mounting Holes 1/2 NPT Feamle Inlet 1 3/8 [35mm] 1/2 NPT Feamle Outlet Pedal Height Adjusting Screw Adj. from 2 1/8 [54mm] - 6 1/4 [159mm]when valve closed, 1/4 [6mm] - 2 5/8 [67mm] when valve open Adj. From 14 1/2 [368mm] to 15 3/8 [390mm] Closed, 13 1/2 [343mm] to 14 3/4 [375mm] open 16 5/16 [414mm] when raised for cleaning 20 7/16 [520mm] Max. Raised for cleaning Note: All pedal position dimensions are based on a recommended min. MTG height of 8 3/4 [222mm] above finished floor. Floor The double wall mounted pedal valve has a brass body with a polished chrome plated finish. It can be used for hot and cold water. > Wall mounted > Extended hot & cold pedals > Aluminium pedal with satin finish > Pedals flip upward for ease of cleaning PRODUCTS: B-504-K - Double pedal valve, wall mount w/ gooseneck outlet B-50P - Repair Kit to suit B-502, B-504, B-507 and B-508 12 13
PRODUCT CODE B-507 PRODUCT CODE B-502 SINGLE FLOOR MOUNTED PEDAL VALVE DOUBLE FLOOR MOUNTED PEDAL VALVE 54 1/2 [114mm] 5-5 3/16 [127-132mm] Chrome Plated Chrome Plate Brass Brass Foot Foot Pedals Pedals The single floor mounted pedal valve has a brass body with a polished chrome plated finish. It can be used for hot or cold water. > Single floor mounted pedal > Self closing valve PRODUCTS: 2 9/16 9/16 [65mm] [65mm] 15/16 15/16 [65mm] [24mm] 1/2 NPT Female 1/2 NPT Female Inlets Inlets 1/2 1/2 NPT NPT Female Female Outlets Outlet 1 3/16 [31mm] The double floor mounted pedal valve has a brass body with a polished chrome plated finish. It can be used for hot and cold water. > Double floor mounted pedal > Self closing valve PRODUCTS: B-507-K - Single pedal valve, floor mount w/ gooseneck outlet B-50P - Repair Kit to suit B-502, B-504, B-507 and B-508 5 3/8 5 3/8 [136mm] 1 1 [25mm] 2 7/16 [61mm] B-502-K - Single pedal valve, floor mount w/ gooseneck outlet B-50P - Repair Kit to suit B-502, B-504, B-507 and B-508 Note: All pedal position dimensions are based on a recommended min. MTG height of 8 3/4 [222mm] above finished floor. Note: All pedal position dimensions are based on a recommended min. MTG height of 8 3/4 [222mm] above finished floor. 14 15
PRODUCT CODE DM-800 PRODUCT CODE B-3952 URN TAP TWIST WASTE VALVE DM-800 B-3952 1409226 The urn tap will pour boiling hot water safely from a urn. Can be used to make tea or coffee. > Chrome plated brass > 15mm male extension & 3/8 BSP Female DM-800 DSP-800 Urn tap Urn tap top assembly The twist waste valve provides practical drainage when avoiding dirty or contaminated water. It has a heavy wall cast bronze body, stainless steel sink contact components and nickel-plated wearing parts. > Fast drainage when opened > Positive sealing when closed > Includes PVC adaptor - 1409226 > Valves available with outlet adaptors > To fit sink opening of 89mm or 3 1/2 > Fits drain outlet 51mm or 2 > Replacement parts available DSP-800 B-3952 MODEL: B-3952 Twist waste valve 16 17
PRODUCT CODE MV-0522 PRODUCT CODE 905101 AQUALISA TIMED FLOW WASHDOWN GUN CONTROL KIT The washdown gun is designed to last and provides adjustable stream from solid to soft spray as well as efficient and easily controlled water supply. > Heavy duty stainless steel construction > Blue rubber cover > Automatic shut-off > 1000kPa max. inlet water pressure > 90 C max. inlet water temperature > 15mm female inlet The Aqualisa Timed Flow Control Kit consists of an air operated solenoid valve and push button. The solenoid valve is easily adjusted to deliver a flow of water between 5 seconds to 60 seconds. > Kit includes air operated solenoid valve and push button. > Easily adjusted flow delivery > Adjustable from 5 secs to 60 secs > Factory preset to 5 seconds MV-0522 MV-0522KIT Heavy duty spray gun Repair kit for spray gun A Push Button Assy B Rubber Washer MODEL: 905101 - Aqualisa Timed Flow Control Kit C Back Nut D Air Tube E Pneumatic Valve F Adjusting Screw 18 19
PRODUCT CODE Z-8410X1 PRODUCT CODE Z-825X1 BENCH MOUNT EXPOSED TAP PRE-RINSE UNIT BENCH MOUNT SINGLE TAP PRE-RINSE UNIT Z-8410X1 Z-8410X1PF The bench mount exposed tap pre-rinse unit is heavy duty and commercially designed with a fully adjustable wall bracket and ceramic disc for extended life and smooth operation. The spray design is for superior cleaning power and at 5L /min. Suitable for any commercial kitchen. > Z-8410X1 - Pre-rinse unit with adjustable centre bench mount tap set, wall bracket, 900mm hose & spray gun > Z-8410X1PF6 - Pre-rinse unit with adjustable centre bench mount tap set, add on pot filler tap with 150mm outlet, wall bracket, 900mm hose & spray gun > Z-8410X1PF12 - Pre-rinse unit with adjustable centre bench mount tap set, add on pot filler tap with 300mm outlet, wall bracket, 900mm hose & spray gun AVAILABLE SIZES (MM): > 150 or 300 pot filler > 900 (standard), 1200, 1500, 1800, 2400 hoses available 5 1200 mm 1200 mm 1220 mm Z-825X1 1220 mm 5 Z-825X1PF The bench mount single tap pre-rinse unit is heavy duty and commercially designed with a fully adjustable wall bracket and ceramic disc for extended life and smooth operation. The spray design is for superior cleaning power and at 5L / min. Suitable for any commercial kitchen. > Z-825X1 - Pre-rinse unit with bench mount single tap, wall bracket, 900mm hose & spray gun > Z-825X1PF6 - Pre-rinse unit with bench mount single tap, add on pot filler tap with 150mm outlet, wall bracket, 900mm hose & spray gun > Z-825X1PF12 - Pre-rinse unit with bench mount single tap, add on pot filler tap with 300mm outlet, wall bracket, 900mm hose & spray gun AVAILABLE SIZES (MM): > 150 or 300 pot filler > 900 (standard), 1200, 1500, 1800, 2400 hoses available 20 21
PRODUCT CODE Z-826X1 PRODUCT CODE Z-842X1 BENCH MOUNT DOUBLE TAP PRE-RINSE UNIT EXPOSED WALL MOUNT TAP PRE-RINSE UNIT Z-826X1 Z-826X1PF Z-842X1 Z-842X1PF The bench mount double tap pre-rinse unit is heavy duty and commercially designed with a fully adjustable wall bracket and ceramic disc for extended life and smooth operation. The spray design is for superior cleaning power and at 5L /min. Suitable for any commercial kitchen. The exposed wall mount tap pre-rinse unit is heavy duty and commercially designed with a fully adjustable wall bracket and ceramic disc for extended life and smooth operation. The spray design is for superior cleaning power and at 5L /min. Suitable for any commercial kitchen. > Z-826X1 - Pre-rinse unit with bench mount mixer tap, wall bracket, 900mm hose & spray gun > Z-826X1PF6 - Pre-rinse unit with bench mount mixer tap, add on pot filler tap with 150mm outlet, wall bracket, 900mm hose & spray gun > Z-826X1PF12 - Pre-rinse unit with bench mount mixer tap, add on pot filler tap with 300mm outlet, wall bracket, 900mm hose & spray gun AVAILABLE SIZES (MM): > 150 or 300 pot filler > 900 (standard), 1200, 1500, 1800, 2400 hoses available 5 1170 mm 1170 mm 1150 mm 1150 mm 5 > Z-842X1 - Pre-rinse unit with wall exposed tap, wall bracket, 900mm hose & spray gun > Z-842X1PF6 - Pre-rinse unit with wall exposed tap, add on pot filler tap with 150mm outlet, wall bracket, 900mm hose & spray gun > Z-842X1PF12 - Pre-rinse unit with wall exposed tap, add on pot filler tap with 300mm outlet, wall bracket, 900mm hose & spray gun AVAILABLE SIZES (MM): > 150 or 300 pot filler > 900 (standard), 1200, 1500, 1800, 2400 hoses available 22 23
juvenile dentention centres ZURN AUSTRALIA ABN: 12 164 922 758 PHONE 1300 00 ZURN EMAIL salesaus@zurn.com HEAD OFFICE VICTORIA 49 Lakeside Drive Broadmeadows VIC 3047 Fax: +61 3 9357 1455 QUEENSLAND 3 / 11 Breene Place Morningside QLD 4170 Fax: +61 7 3396 7066 NEW SOUTH WALES Unit 6 / 3-11 Hallmark Street Pendle Hill NSW 2145 Fax: +61 2 9631 2065 WESTERN AUSTRALIA 398 Victoria Road Malaga WA 6090 Fax: +61 8 9249 8922 NORTHERN TERRITORY Unit 4 / 10 Witte Street Winnellie NT 0820 Fax: +61 8 8947 0036 ZURNAU_MKTG711-01, REV 02/18 ZURN.COM.AU