ALL-IN-ONE POWER SYSTEM welder generator air compressor optional battery booster Designed for Light to Medium Industrial Repair The Air N Arc 150 is the system to choose when weight is the issue. The three head cylinder design on the air compressor means temperatures run cooler for everyday air usage. SPECIFICATIONS Engine 14 HP Kohler or 19 HP Kohler Compressor Type Reciprocating Generator Wattage 5000 peak, 4200 continuous Welder Amperage High frequency welding CC/DC 40-190 Amps operating range 150 Amps at 100% duty cycle 120V/240V Max Pressure (psi) 150 CFM Rating 20 CFM Air Storage Capacity 8-gallon (19 HP), 10-gallon (14 HP), 30-gallon, or skid mount Drive System V-belt/serpentine Kohler 14 HP Fuel Capacity (gal.) 1.9 Dry Weight (lbs.) 425-550 depending on platform Dimensions (in.) 51L x 21W x 31H on 10-gallon air storage models 51L x 19W x 41H on 30-gallon air storage models 51L x 19W x 25H on skid mount models Kohler 19 HP Fuel Capacity (gal.) 11.5 (30-gallon air storage) Dry Weight (lbs.) 425-550 depending on platform Dimensions (in.) 48L x 20.5W x 29H on 8-gallon air storage models 48L x 22W x 41H on 10-gallon air storage models 48L x 22W x 24H on skid mount models Do not weld with the electrode holder connected to the negative port and the work piece connected to the vehicle. Bodily harm and equipment damage may occur. 4.5 (8-gallon air storage) 800-392-3015 www.americaneagleacc.com
SPECIAL FEATURES Will fit on side pack or behind cab Totally self-contained but can be integrated with the chassis Powder coated sheet metal for protection All the benefits of a high frequency welder offering excellent weld characteristics - 100% duty cycle Galvannealed steel Heavy-duty belt drive system for anti-vibration and long service intervals AIR COMPRESSOR Reciprocating compressor 20 CFM 150 max PSI Cast iron air pump with 3-cylinder head design for better cooling WELDER Patented amperage and power controls built into welding lead for ease of use 150 amps @ 100% duty cycle, CC/DC, 40-190 Amps operating range 100% completely controllable. No preset settings. Independent welding generator Optional CV/DC on remote panel machines Safe multi-function Auto throttle control GENERATOR True (2) generator system for safe multi-functioning of welder and electric tools 5000 peak watts @ 60 Hz, 4200 continuous watts Independent AC power for safe multi-functioning Brushless Smooth wave power with minimal distortion ENGINE 14 HP Kohler or 19 HP Kohler Electric start 1.9, 4.5 or 12-gallon fuel tank BATTERY BOOST/CHARGE (optional) 12V/24V boost/charge REMOTE CONTROL PANEL (optional) Available on Kohler 19 HP only Provides ultimate user convenience and safety All functions accessible at panel. No need to jump in and out of vehicle AVAILABLE IN: 8-gallon (19 HP), 10-gallon (14 HP), 30-gallon and skid mount OPTIONS/ACCESSORIES Remote mount control panel (Kohler 19 only) 12V/24V charge/boost capability CV MIG capability on remote panel machines, 15-40V DC Cable extension - 20, 30, 40, 50 Battery booster cables Electric fuel pump (Kohler 19 only) Remote air tank options Remote condensation drain Cold weather kits Maintenance kits GFCI outlet for protection of 120V/240V - remote panel machines only What work trucks are built around. 740 North State Street P.O. Box 169 Garner, IA 50438 Telephone: 641-923-2425 800-392-3015 Internet: www.americaneagleacc.com E-mail: sales@americaneagleacc.com *Specifications may change without notification. Vanair, ALL-IN-ONE and Air N Arc are registered trademarks of Vanair Manufacturing Inc. Copyright 2016 American Eagle Accessories Group. 2/16
ALL-IN-ONE POWER SYSTEM welder generator air compressor battery booster Perfect Machine for Medium to Heavy Industrial Work The Air N Arc 250 offers the power you require for all of your mobile workshop needs. Electric power tools or applications that have a maximum continuous air capacity to operate a 1 impact wrench or welding for medium to heavy industrial repair. SPECIFICATIONS Engine Compressor Type Generator Wattage Welder Amperage 23 HP EFI Kohler Reciprocating 5,000 continuous watts AC power 120V/240V High frequency welding CC/DC CV/DC 30-250 Amps operating range 250 Amps at 100% duty cycle Battery Charge/Booster 300 Amps 12V charge and 12V/24V boost Max Pressure (psi) 175 CFM Rating Air Storage Capacity Drive System Fuel Capacity (gal) 12 24 CFM Weight (lbs.) 500-725 Dimensions (Skid - in.) Dimensions (30 gal - in.) 30-gallon or remote tank Dual V-belt/serpentine 48.125L x 23.125W x 27H 48.125L x 24W x 43H Do not weld with the electrode holder connected to the negative port and the work piece connected to the vehicle. Bodily harm and equipment damage may occur. 800-392-3015 www.americaneagleacc.com
SPECIAL FEATURES Will fit on side pack or behind cab Totally self-contained but can be integrated with the chassis Powder coated galvannealed sheet metal All the benefits of a high frequency welder offering excellent weld characteristics - 100% duty cycle Galvannealed steel Heavy duty belt drive system for anti-vibration and long service intervals AIR COMPRESSOR Reciprocating compressor 24 CFM 175 max PSI Two stage cast iron air pump for high pressure output BATTERY BOOST/CHARGE 12V/24V boost/charge REMOTE CONTROL PANEL Provides ultimate user convenience and safety All functions accessible at panel. No need to jump in and out of vehicle ENGINE 25 HP EFI Kohler Electric start 12-gallon fuel tank AVAILABLE IN: 8-gallon, 30-gallon, or remote tank configuration WELDER High frequency welding CC/DC CV/DC 30-250 Amps operating range 250 Amps at 100% duty cycle 100% completely controllable. No preset settings. Independent welding generator CV/DC 15-40V on remote panel machines Safe multi-function Auto throttle control GENERATOR True (2) generator system for safe multi-functioning of welder and electric tools 5000 continuous watts @ 60 Hz Independent AC power for safe multi-functioning Brushless Smooth wave power with minimal distortion OPTIONS/ACCESSORIES Battery booster cables Remote air tank 30-gallon Electric fuel pump Remote condensation drain Cold weather kits Maintenance kits GFCI outlet for protection of 120V/240V - remote panel machines only What work trucks are built around. 740 North State Street P.O. Box 169 Garner, IA 50438 Telephone: 641-923-2425 800-392-3015 Fax: 641-923-9099 Internet: www.americaneagleacc.com E-mail: sales@americaneagleacc.com *Specifications may change without notification. Vanair, ALL-IN-ONE and Air N Arc are registered trademarks of Vanair Manufacturing Inc. Copyright 2016 American Eagle Accessories Group. 2/16
ALL-IN-ONE POWER SYSTEM welder generator air compressor battery booster SPECIFICATIONS Drive System Hydraulic Requirements Max Pressure (psi) 175 CFM Rating Compressor Type Generator Wattage Welder Amperage Battery Charger/Booster Dry Weight (lbs.) 595 Dimensions (in.) Open hydraulic The latest Air N Arc All In-One Power System features the innovation of being hydraulically driven, while still offering all the advantages of the Air N Arc 300 engine drive systems including a 40 cfm rotary screw for ondemand air, a 300 amp welder, 300 amp 12V charge and 12V/24V boost, and a 7kW generator. Designed as a true two generator system, the Air N Arc 300H allows simultaneous dual functionality such as welding and generator for lights for nighttime service. The system offers a small footprint for side pack or behind the cab mounting and is ideal for trucks with hydraulics already installed, such as crane trucks. 19 gpm @ 2800 psi multifunction / 14.5 gpm @ 2500 psi single function 40 CFM at high speed, 30 CFM at idle Rotary screw 7000 peak - 6800 continuous watts 120V GFCI and 240V outlets High frequency welding CC/DC CV/DC 30-300 Amps operating range 270 Amps at 100% duty cycle 300 Amps 12V charge and 12V/24V boost 47L x 21W x 31H The Lightest, Most Compact Rotary Screw ALL-IN-ONE Power System on the Market Ratings above are approximate and are based on 120 F hydraulic fluid temperature. Add 400 psi minimum to hydraulic requirements for hydraulic system peak pressure ratings. Machine hydraulic relief valve is set at 3200 psi. Do not weld with the electrode holder connected to the negative port and the work piece connected to the vehicle. Bodily harm and equipment damage may occur. 800-392-3015 www.americaneagleacc.com
ALL-IN-ONE POWER SYSTEM with Hydraulic Reservoir welder generator air compressor battery booster/charge hyd. pump hyd. reservoir Six forms of power on a single platform for transferability and flexibility The new Air N Arc I-300 with an integrated hydraulic reservoir provides you with air, generator, welding, hydraulic pump and battery boost and charge on a single self-contained platform. Fully functional on and off your vehicle, the new system is ideal for all your field service and hydraulic tool needs. SPECIFICATIONS Engine Compressor Type CFM Rating Max Pressure (psi) 175 Fuel Tank (gal.) 12 Generator Wattage Hydraulic Output - Piston Pump Welder Amperage Battery Charger/Booster Drive System Wet Weight (lbs.) 1600 Dimensions (in.) 25 HP Kubota, Liquid Cooled (Tier 4 compliant) Rotary screw 40 CFM at high speed, 30 cfm at idle 7000 peak - 6800 continuous watts 120V GFCI and 240V outlets Up to 13 gpm High frequency welding CC = 30-300 amps, CV = 15-40V operating range 270 amps at 100% duty cycle 300 amps 12V charge and 12V/24V boost Belt driven 72L x 21W x 43H with platform Ratings above are approximate and are based on 120ºF hydraulic fluid temperature. Consult Vanair for specific details. Do not weld with the electrode holder connected to the negative port and the work piece connected to the vehicle. Bodily harm and equipment damage may occur. 800-392-3015 www.americaneagleacc.com
with Hydraulic Reservoir SPECIAL FEATURES One unit incorporates air compressor, generator, battery booster, battery charger, welder and hydraulic pump. No need for auxiliary plug-in welder or battery booster. Reliable and easy electric starting Kubota engine Heavy duty belt drive system for anti-vibration and long service intervals One unit to start all your equipment with battery charge and boost capability offering: 12V charge, 12V /24V boost. Capable of charging vehicle s battery. True 2 generator system for safe multifunction of welder and electric tools CV MIG capability All the benefits of a high frequency welder offering excellent weld characteristics Throttle control for weld/battery boost function Rotary screw compressor for air on demand offering: 40 CFM at high speed and 30 CFM at idle Integrated lift hook and battery tray Battery isolator switch Starter isolator switch Battery jump start receptacle Manual reset circuit breakers Variable displacement hydraulic piston pump compatible with both an open center and closed center system Designed for easy maintenance and fuel efficiency Powder coated sheet metal Galvannealed canopy AIR COMPRESSOR Rotary screw compressor - encapsulated 40 CFM @ 100 PSI; 30 CFM @ idle 175 max PSI WELDER 30-300 amps high frequency CC/DC, CV/DC, 270 Amps 100% duty cycle Independent welding generator Safe multi-function Auto throttle control CV mig capability, 15-40V DC Power GENERATOR 7000 peak - 6800 continuous watts 120V GFCI and 240V outlets Independent AC power for safe multi-functioning Brushless Smooth wave BATTERY BOOST/CHARGE 12V charge 12V/24V boost Capable of jump starting your truck s engine Maintains truck s battery and operates work and emergency lights while engine is off HYDRAULIC PUMP Up to 10.5 GPM 3000 maximum PSI HYDRAULIC RESERVOIR 20 gal reservoir with filter, oil level sight glass and temperature gauge ENGINE 25 HP Kubota engine, liquid cooled Electric start 12 gal fuel tank Saves fuel by providing power with vehicle s engine off SKID MOUNT Includes fork lift pockets for easy transferability OPTIONS/ACCESSORIES Battery booster cables Cable extension segment Remote air tank 30 gal Remote condensation drain Cold weather kits Maintenance kits What work trucks are built around. 740 North State Street P.O. Box 169 Garner, IA 50438 Telephone: 641-923-2425 800-392-3015 Fax: 641-923-9099 Internet: www.americaneagleacc.com E-mail: sales@americaneagleacc.com *Specifications may change without notification. Vanair, ALL-IN-ONE and Air N Arc are registered trademarks of Vanair Manufacturing Inc. Copyright 2016 American Eagle Accessories Group. 2/16
SPECIAL FEATURES Single function 14.5 GPM model is suitable for Ford 4X4 Super Duty and Dodge Trucks TRUE 2 generator system for safe multi-function of welder and electric tools Integrated hydraulic cooler All the benefits of a high frequency welder offering excellent weld characteristics CV MIG capability One unit to start all your equipment with battery charge and boost capability offering: 12V charge, 12V /24V boost 40 CFM rotary screw compressor for air on demand and extended life of unit Heavy-duty belt drive system for anti-vibration and long service intervals Control panel can be remotely mounted for the ultimate in user convenience Integrated lift hook Designed for easy maintenance Small dimensions allow unit to fit on a side pack or be mounted behind the cab Powder coated sheet metal Galvannealed steel AIR COMPRESSOR Rotary screw compressor - encapsulated 40 CFM @ 100 PSI 175 max PSI WELDER High frequency welding CC/DC CV/DC 30-300 Amps operating range 270 Amps at 100% duty cycle 15-40V DC Independent DC welder Safe multi-function GENERATOR 7000 peak - 6800 continuous watts 120V GFCI and 240V outlets Independent AC power for safe multi-functioning Brushless Smooth wave for minimal distortion BATTERY BOOST/CHARGE 12V charge 12V/24V boost OPTIONS/ACCESSORIES Battery booster cables Cable extension segment Remote air tank 30-gallon Remote condensation drain Maintenance kits Compressor air inlet heater HYDRAULIC SYSTEM REQUIREMENTS American Eagle highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following: The hydraulic flow and pressure requirements of the air compressor When the compressor is running there is a continuous hydraulic load The duty cycle and ambient operating temperatures Other hydraulic equipment which may share the same hydraulic supply system (American Eagle recommends a dedicated pump and hydraulic circuit) What work trucks are built around. 740 North State Street P.O. Box 169 Garner, IA 50438 Telephone: 641-923-2425 800-392-3015 Fax: 641-923-9099 Internet: www.americaneagleacc.com E-mail: sales@americaneagleacc.com *Specifications may change without notification. Vanair, ALL-IN-ONE and Air N Arc are registered trademarks of Vanair Manufacturing Inc. Copyright 2016 American Eagle Accessories Group. 2/16
ALL-IN-ONE POWER SYSTEM welder generator air compressor battery booster SPECIFICATIONS Engine Gas: 27 HP EFI Kohler, Air Cooled Diesel: 25 HP Kubota, Liquid Cooled Compressor Type Generator Wattage Welder Amperage Battery Charger/Booster Max Pressure (psi) 175 CFM Rating Drive System Fuel Capacity (gal) 12 Rotary screw 7000 peak - 6800 continuous watts 120V and 240V outlets High frequency welding CC/DC CV/DC 30-300 Amps operating range 270 Amps at 100% duty cycle 300 Amps 12V charge and 12V/24V boost 40 CFM at high speed, 30 CFM at idle Belt driven Weight (lbs.) Gas: 700 Diesel: 870 The Lightest, Most Compact Rotary Screw ALL-IN-ONE Power System on the Market Providing 300 amps of welding power and 40 cfm of ondemand air, the Air N Arc 300 is compact enough to fit a truck s side-pack or be mounted behind the cab. The totally self-contained unit delivers more efficient use of truck space and can be integrated with the chassis for maximum versatility. Featuring the market s only remote panel for a diesel ALL-IN-ONE Power System, it provides ultimate user convenience and safety. Designed for maximum fuel efficiency, the system offers the power you need for all your mobile workshop needs. Dimensions (in.) Gas: 47L x 21W x 31H Diesel: 47L x 21W x 33H Available in Gas and Diesel Do not weld with the electrode holder connected to the negative port and the work piece connected to the vehicle. Bodily harm and equipment damage may occur. 800-392-3015 www.americaneagleacc.com
SPECIAL FEATURES TRUE 2 generator system for safe multi-function of welder and electric tools All the benefits of a high frequency welder offering excellent weld characteristics CV MIG capability One unit to start all your equipment with battery charge and boost capability offering: 12V charge, 12V /24V boost 40 cfm rotary screw compressor for air on demand and extended life of unit Heavy-duty belt drive system for anti-vibration and long service intervals Control panel can be remotely mounted for the ultimate in user convenience Totally self-contained, but can be integrated with the chassis for maximum versatility Integrated lift hook and battery tray Designed for easy maintenance Small dimensions allow unit to fit on a side pack or be mounted behind the cab Powder coated sheet metal Galvannealed steel AIR COMPRESSOR Rotary screw compressor for air on demand 40 CFM @ 100 PSI 175 max PSI WELDER High frequency welding CC/DC CV/DC 30-300 Amps operating range 270 Amps at 100% duty cycle Independent DC welder Safe multi-function capabilities Auto throttle control CV Mig capabilities, 15-40V DC GENERATOR 6800 continuous watts @ 60 Hz (available in 5700 continuous watts @ 50 Hz) Independent AC power for safe multi-functioning Brushless Smooth wave for minimal distortion BATTERY BOOST/CHARGE 12V charge 12V/24V boost ENGINE Gas: 29 HP EFI Kohler air cooled Diesel: 25 HP Kubota liquid cooled Reliable and easy start Electric start 12-gallon fuel tank Saves fuel by providing power with vehicle s engine off Tier 4 emission compliant Glow plugs OPTIONS/ACCESSORIES Battery booster cables Cable extension segment Remote air tank 30-gallon Remote condensation drain Maintenance kits Cold weather kits GFI kit available What work trucks are built around. 740 North State Street P.O. Box 169 Garner, IA 50438 Telephone: 641-923-2425 800-392-3015 Fax: 641-923-9099 Internet: www.americaneagleacc.com E-mail: sales@americaneagleacc.com *Specifications may change without notification. Vanair, ALL-IN-ONE and Air N Arc are registered trademarks of Vanair Manufacturing Inc. Copyright 2016 American Eagle Accessories Group. 2/16
ALL-IN-ONE POWER SYSTEM welder generator air compressor battery booster/charge hyd. pump Inclusive, innovative, indispensable The inclusive, innovative, indispensable Air N Arc I-300 is the first system in the world to offer six forms of power in a single 48 unit. Based on the technology of the Air-N-Arc 300 diesel system, it provides an integrated 40 cfm rotary screw compressor, 7kW AC generator, 300 amp welder, battery booster and battery charger, with the newly added power of a 10.5 gpm hydraulic pump...all driven by a single engine. Designed to provide full functionality with the truck engine off, mechanics can remain productive in all areas of their workday. The Air N Arc I-300 offers enough power to run a crane and the technology to integrate with the crane control. SPECIFICATIONS Engine Compressor Type Max Pressure (psi) 175 CFM Rating Fuel Tank (gal.) 12 Generator Wattage Hydraulic Output - Piston Pump Welder Amperage Battery Charger/Booster Drive System Dry Weight (lbs.) 910 Dimensions (in.) 25 HP Kubota, Liquid Cooled Rotary screw 40 CFM at high speed, 30 CFM at idle 7000 peak - 6800 continuous watts 120V GFCI and 240V outlets Up to 13 gpm, up to 3000 PSI High frequency welding CC = 30-300 amps, CV = 15-40V operating range 270 amps at 100% duty cycle 300 amps 12V charge and 12V/24V boost Belt driven 47L x 21W x 33H Ratings above are approximate and are based on 120ºF hydraulic fluid temperature. Do not weld with the electrode holder connected to the negative port and the work piece connected to the vehicle. Bodily harm and equipment damage may occur. 800-392-3015 www.americaneagleacc.com
SPECIAL FEATURES One unit incorporates air compressor, generator, battery booster, battery charger, welder and hydraulic pump. No need for auxiliary plug-in welder or battery booster Reliable and easy electric starting Kubota engine Heavy-duty belt drive system for anti-vibration and long service intervals Includes electric fuel pump for easy install One unit to start all your equipment with battery charge and boost capability offering: 12V charge, 12V /24V boost. Capable of charging vehicle s battery. True 2 generator system for safe multifunction of welder and electric tools CV MIG capability All the benefits of a high frequency welder offering excellent weld characteristics Throttle control for weld/battery boost function Rotary screw compressor for air on demand offering: 40 cfm at high speed and 30 cfm at idle Integrated lift hook and battery tray Battery isolator switch Starter isolator switch Battery jump start receptacle Manual reset circuit breakers Control panel can be remotely mounted for the ultimate user convenience Designed for easy maintenance and fuel efficiency Small dimensions allow unit to fit on a side back or be mounted behind the cab Powder coated sheet metal Galvannealed canopy AIR COMPRESSOR Rotary screw compressor - encapsulated 40 CFM @ 100 PSI; 30 CFM @ idle 175 max PSI WELDER High frequency welding CC/DC CV/DC 30-300 Amps operating range 270 Amps at 100% duty cycle Independent welding generator Safe multi-function Auto throttle control CV mig capability, 15-40V DC Power GENERATOR 7000 peak - 6800 continuous watts 120V GFCI and 250V outlets Independent AC power for safe multi-functioning Brushless Smooth wave BATTERY BOOST/CHARGE 12V charge 12V/24V boost Capable of jump starting your truck s engine Maintains truck s battery and operates work and emergency lights while engine is off HYDRAULIC PUMP Up to 10.5 GPM 3000 maximum PSI Variable displacement hydraulic piston pump compatible with both an open center and closed center system ENGINE 25 HP Kubota engine, liquid cooled Electric start Glow plug OPTIONS/ACCESSORIES Battery booster cables Cable extension segment Remote air tank 30-gallon Remote condensation drain Cold weather kits Maintenance kits GFCI outlet for protection of 120V/240V - remote panel machines only What work trucks are built around. 740 North State Street P.O. Box 169 Garner, IA 50438 Telephone: 641-923-2425 800-392-3015 Fax: 641-923-9099 Internet: www.americaneagleacc.com E-mail: sales@americaneagleacc.com *Specifications may change without notification. Vanair, ALL-IN-ONE and Air N Arc are registered trademarks of Vanair Manufacturing Inc. Copyright 2016 American Eagle Accessories Group. 2/16