Conforms to EN1088, EN292, EN60947-5-1, EN60204-1 Description PHP6009 Heavy-Duty Hinge-Operated Safety Interlock Switch (Pneumatic) The PHP6009 is similar to the conventional HP6009 except that it gives positive acting isolation of a machine s compressed air supply instead of electrical power. The PHP6009 switch is mounted at the hinge point of the guard door. The bored stainless steel operating shaft is mounted in a heavy sealed bearing, enabling the switch shaft to be used as the hinge pin if necessary. NOTE: The PHP6009 does not have the adjustable cam used with the standard HP6009. Heavy-duty housing the diecast housing and stainless steel actuator make the PHP6009 hinge-operated switch ideal for heavy-duty applications NEMA 4 enclosure enables the PHP6009 to withstand water washdown cleaning Easy installation the pre-bored shaft with set screw enables the PHP6009 to be easily installed on an existing hinge pin. Cam limits guard door opening to 5 degrees before safety contacts are opened. Long life the PHP6009 with its stainless steel shaft is designed for a minimum of one million actuations Safety switch conformity the PHP6009, with its force-guided contacts and tamper-resistant mechanism, conforms to the European safety standards indicated here. A o to the Engineering uide For in-depth information on safety standards and use. N For More uarding Products See Section N for safeguarding cutting and turning machines 110
Operation Mounting Methods Valve Arrangement COMMON N/C N/O 2 3 1 M4 Set Screw Roll Pin Roll Pin Bored Shaft The actuator shaft is pre-bored, allowing the existing hinge pin to be used as the mounting point. Solid Shaft The solid actuator shaft can be used as the hinge pin on certain guards. The cam mechanism is preset to positively operate the safety contacts at 5 of guard movement. 111
Application Typical applications are on swinging guard doors, providing a tamper resistant switch free of misalignment problems. Specifications Pneumatic Valve Configurations: Safety Valve: Auxiliary Valve: Fluid Used: Pressure Range: Passage Diameter: Connection: Flow: Mechanical Mounting: Mounting Hardware: Shaft Rotation for Positive Opening: Break Contact Min Torque: Max Activation Frequency: Case Material: Actuator Material: Entry: Weight: Color: Mechanical Life: Environmental All Models 1 N/C + 1 N/O 1 N/C positive break 1 N/O Compressed air or neutral gas 2 to 8 bars (30-115 PSI) 2.7 mm (0.11 in.) Push-in fittings 4.0 mm (0.157 in.) O.D. with 2.5 mm I.D. 138 liters per minute (5 ft 3 per minute) Any position 2 x M4 screws 5 degrees Nearly zero 1 cycle/sec Heavy-duty, die-cast alloy Stainless steel 1 x M20 420 g (14.8 oz.) Red 1 x 10 6 minimum Protection: IP66 (NEMA 4) Operating Temperature: Cleaning: -10 to 60 C (14 to 140 F) Water washdown Compliance Standards: EN1088, EN292, EN60947-5, EN60204-1 Approvals/Listings: CE marked for all applicable directives Specifications are subject to change without notice. Note: The safety contacts of the Omron STI switches are described as normally closed (N/C) i.e., with the guard closed, actuator in place, and the machine able to be started. o to the Engineering uide For in-depth information on A safety standards and use. N For More uarding Products See Section N for safeguarding cutting and turning machines 112
Dimensions mm/in. 3.5 0.14 14.5 0.57 99 3.90 23.5 0.93 38 1.5 l 24 0.94 36 1.42 52 2.05 86 3.39 65 2.56 D 15.5 0.61 13 0.51 25 0.98 note: holes only on Bored Shaft 2 x holes m4 8 0.31 Ø9.5 0.37 2 x holes Ø3.2 0.13 5 0.20 ShAft types type Bored Solid l = length 30 1.18 85 3.35 D = DiA 16 0.63 12.7 0.5 Ordering Model Valves entry Part No. PHP6009-11BPF, (Bored Shaft) 1 N/C + 1 N/O 1 x M20 opening 44502-0410 PHP6009-11SPF, (Solid Shaft) 1 N/C + 1 N/O 1 x M20 opening 44502-0420 Accessories (see page 238) 113
OMRON AUTOMATION AND SAFETY THE AMERICAS HEADQUARTERS Chicago, IL USA 847.843.7900 800.556.6766 www.omron247.com OMRON CANADA, INC. HEAD OFFICE Toronto, ON, Canada 416.286.6465 866.986.6766 www.omron247.com OMRON ELECTRONICS DE MEXICO HEAD OFFICE México DF 52.55.59.01.43.00 01-800-226-6766 mela@omron.com OMRON ELECTRONICS DE MEXICO SALES OFFICE Apodaca, N.L. 52.81.11.56.99.20 01-800-226-6766 mela@omron.com OMRON ARENTINA SALES OFFICE Cono Sur 54.11.4783.5300 OMRON CHILE SALES OFFICE Santiago 56.9.9917.3920 OTHER OMRON LATIN AMERICA SALES 54.11.4783.5300 OMRON ELETRÔNICA DO BRASIL LTDA HEAD OFFICE São Paulo, SP, Brasil 55.11.2101.6300 www.omron.com.br OMRON EUROPE B.V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. +31 (0) 23 568 13 00 www.industrial.omron.eu Authorized Distributor: Automation Control Systems Machine Automation Controllers (MAC) Programmable Controllers (PLC) Operator interfaces (HMI) Distributed I/O Software Drives & Motion Controls Servo & AC Drives Motion Controllers & Encoders Temperature & Process Controllers Single and Multi-loop Controllers Sensors & Vision Proximity Sensors Photoelectric Sensors Fiber-Optic Sensors Amplified Photomicrosensors Measurement Sensors Ultrasonic Sensors Vision Sensors Industrial Components RFID/Code Readers Relays Pushbuttons & Indicators Limit and Basic Switches Timers Counters Metering Devices Power Supplies Safety Laser Scanners Safety Mats Edges and Bumpers Programmable Safety Controllers Light Curtains Safety Relays Safety Interlock Switches C397I-E-01 07/15 Note: Specifications are subject to change. 2015 Omron Electronics LLC Printed in U.S.A. Printed on recycled paper.