Adult Manual Wheelchairs Etac Cross 5 Active Creating stability for activity
Etac Cross 5 Active - Creating stability for activity Etac Cross 5 Active is the perfect choice for the active wheelchair user who requires a little bit more trunk stability and prefer a compact folding frame. Shape, Support and Performance The frame, made of casted aluminum and a reinforced cross brace, form a perfect unit that responds directly to the smallest hand movement when propelling. With 36 selectable rear wheel positions, the perfect seat height and energy-saving propulsion combination can be guaranteed. The frame has a neat design and if desired, Cross Active can be equipped with anti-tippers. The 2B back support is designed with gently curvedtubes providing extended lateral support. Upper body balance is core to optimize propulsion. To be active longer, we seek solutions extending sitting tolerance over time. We call this - Ability Based Seating TM. Features Padded shields Padded shields provide extra comfort and protect sensitive areas from peak pressure. The right balance Try a more active wheel position for improved mobility. It is quick and easy to change between 36 selectable wheel positions! Breathable cover The cover in Airmesh gives a modern and light impression. It can also be used for the 3A back support. Compact when folded When folded, Cross Active only measures 32 cm (13") Manual Wheelchairs Cross 5 Active Etac Creating Possibilities
Adult Manual Wheelchairs The rear wheels can be set in four different positions in each square gap, in all 36 positions! Perfect conditions for fine tuning the the rear seat height and propulsion properties. Seat width Total width Front seat height Rear seat height Seat depth Weight (Transport weight*) 35 cm (13¾") short 56 cm (22") 34-51 cm (13½-20") 34-51 cm (13½-20") 36-49 cm (14¼-19¼") 14.1 kg (9.1 kg*) - 31 lb (20 lb*) 35 cm (13¾") long 56 cm (22") 34-51 cm (13½-20") 34-51 cm (13½-20") 42-55 cm (16½-21¾") 14.3 kg (9.3 kg*) - 31.5 lb (20.5 lb*) 37.5 cm (14¾") short 58.5 cm (23") 34-51 cm (13½-20") 34-51 cm (13½-20") 36-49 cm (14¼-19¼") 14.2 kg (9.2 kg*) - 31.3 lb (20.3 lb*) 37.5 cm (14¾") long 58.5 cm (23") 34-51 cm (13½-20") 34-51 cm (13½-20") 42-55 cm (16½-21¾") 14.4 kg (9.4 kg*) - 31.7 lb (20.7 lb*) 40 cm (15¾") short 61 cm (24") 34-51 cm (13½-20") 34-51 cm (13½-20") 36-49 cm (14¼-19¼") 14.3 kg (9.3 kg*) - 31.5 lb (20.5 lb*) 40 cm (15¾") long 61 cm (24") 34-51 cm (13½-20") 34-51 cm (13½-20") 42-55 cm (16½-21¾") 14.5 kg (9.5 kg*) - 32 lb (20.9 lb*) 42.5 cm (16¾") short 63.5 cm (25") 34-51 cm (13½-20") 34-51 cm (13½-20") 36-49 cm (14¼-19¼") 14.4 kg (9.4 kg*) - 31.7 lb (20.7 lb*) 42.5 cm (16¾") long 63.5 cm (25") 34-51 cm (13½-20") 34-51 cm (13½-20") 42-55 cm (16½-21¾") 14.6 kg (9.6 kg*) - 32 lb (21 lb*) 45 cm (17¾") short 66 cm (26") 34-51 cm (13½-20") 34-51 cm (13½-20") 36-49 cm (14¼-19¼") 14.6 kg (9.6 kg*) - 32 lb (21 lb*) 45 cm (17¾") long 66 cm (26") 34-51 cm (13½-20") 34-51 cm (13½-20") 42-55 cm (16½-21¾") 14.8 kg (9.8 kg*) - 32.6 lb (21.6 lb*) 47.5 cm (18¾") short 68.5 cm (27") 34-51 cm (13½-20") 34-51 cm (13½-20") 36-49 cm (14¼-19¼") 14.7 kg (9.7 kg*) - 32.4 lb (21.4 lb*) 47.5 cm (18¾") long 68.5 cm (27") 34-51 cm (13½-20") 34-51 cm (13½-20") 42-55 cm (16½-21¾") 14.9 kg (9.9 kg*) - 32.8 lb (21.8 lb*) 50 cm (19¾") short 71 cm (28") 34-51 cm (13½-20") 34-51 cm (13½-20") 36-49 cm (14¼-19¼") 14.8 kg (9.8 kg*) - 32.6 lb (21.6 lb*) 50 cm (19¾")long 71 cm (28") 34-51 cm (13½-20") 34-51 cm (13½-20") 42-55 cm (16½-21¾") 15 kg (10 kg*) - 33 lb (22 lb*) Transport weight: Without leg supports, rear wheels and mud guards. Back support height Low: 35, 37.5 and 40 cm. (13¾, 14¾ and 15¾") High: 42.5, 45 and 47.5 cm. (16¾, 17¾ and 18¾") Width, folded 32 cm (12½") Max user weight 135 kg (297.62 lb) www.etac.com Manual Wheelchairs Cross 5 Active
Etac Cross 2B Back Support promoting the ability to be active The design of the back support is of importance to provide maximum support, freedom of movement and mobility. The 2B back support has integrated lateral support. The padded shields covering the tension adjustable back straps are protecting sensitive body zones from pressure. The 2B back support is intended for the user who wants to remain active but needs that little extra support for stability. Embracing Shape The accurate pelvic support The c-curved back support provides improved lateral support and literately embraces the user s back. Fixed push handles are integrated on the back tubes. To obtain an accurate pelvic support, the lower part of the upholstery is height adjustable. This setting is easily done with the user positioned in the wheelchair. Manual Wheelchairs Cross 5 Active Etac Creating Possibilities
Adult Manual Wheelchairs Options Back wedge plush, long 30 cm (12") long. Soft wedge that attaches with Velcro under the cover. Upholstery: dark grey plush. Sold per piece. Side Cushion Embracing support. Rotate to choose between two different shapes. Height: 29 cm (11½"), Depth: 15 cm (6"). Supported by the arm support. Sold per piece. Back wedge plush, short 15 cm (6") long. Soft wedge that attaches with Velcro under the cover. Upholstery: dark grey plush. Sold per piece. Positioning belt With snap-lock, length adjustable. Two alternative attachment points on the frame. Wedges, mod. 1 (small) Cell foam with Velcro attachment. Length: 13 cm (5") Width: 9.5 cm (4") Height: 2 cm (¾") Sold per pair. Mudguard Adjustable in height, depth and angle. Material: Carbon fibre. Wedges, mod. 2 (medium) Cell foam with Velcro attachment. Length: 19 cm (7½") Width: 12 cm (5") Height: 2 cm (¾") Sold per pair. Arm support Detachable and height-adjustable with solid top, 25 cm (9¾") or long 35 cm (14¼") arm support pad. Height adjustment with Allen key or finger screw. Wedges, mod. 3 (large) Cell foam with Velcro attachment. Length: 20 cm (8") Width: 17 cm (6½") Height: 2.5 cm (1") Sold per pair. Hemi tray Fastened to the arm support cushions (included) using Velcro. Fits both short and long arm support. A non-slip mat is available as an extra option. 3A - Back support Our most adaptable back. For premium shape and support. Can be equipped with height adjustable or fixed push handles. Leg support, 70º Black. Detachable and swing-away. Also available with locking device. Fixed push handles 3A Descrete design, detachable. Alternative push handles for 3A back support. Leg support, 90º Brings the foot support 5 cm (2") closer to the frame. Can only be used with 4" or 5" castors. Also available in a short version and with locking device. www.etac.com Manual Wheelchairs Cross 5 Active
Foot support Foldable. Adjustable in height, depth and angle. Available with short, medium or long attachment tube. Handrims Choose from plastic-coated, foam rubber, aluminium, titanium and stainless. Foot support, one-piece Foldable and adjustable in height and angle. One arm drive Fits the left or right sides of the chair. Cannot be combined with attendant brakes. Calf strap Removable, adjustable in length. Brake with angled handle Provides a larger gripping surface. Colour: Black or red Padding for calf strap Provides a softer support. Available in 20 cm (7¾"), 30 cm (11¾") and 40 cm (15¾") lengths. Brake handle extension The brake lever can be angled forward to facilitate sideway transfer. Amputee leg support Adjustable in height, depth, angle and also sideways. Fits both left and right side. Upholstery: Dark grey plush or black Dartex. One hand brake Right or left side. Can be combined with attendant brakes. Amputee weigth Counteracts risk of tipping for amputee users and improves propelling qualities. Detachable and angle adjustable. Can be combined with Amputee support. Weight: 3 kg (6,6 lbs). Seat cushion Anatomically shaped seat cushion. 52 cm (20½") long. To be cut to the adjusted seat depth. Upholstery: dark grey plush. Rear wheels 20", 22" or 24", as well as 24" lightweight rear wheel. Solid or pneumatic wheels tyres. The lightweight wheels have high pressure pneumatic tubes. Seat extender Attached to the seat with Velcro. Increases seat depth by 7 cm (2¾"). Manual Wheelchairs Cross 5 Active Etac Creating Possibilities
Adult Manual Wheelchairs Seat widening kit Increases the distance between the arm supports by 1 cm (½"). The total width also increases by 1 cm (½"). Spoke guards Available in grey or yellow print. Widening castor housing Moves the castor 3 cm (1¼") outwards. The chair's total width is not affected. Tool kit Contains all necessary tools. Anti-tippers Adjustable in height and length. Can also be folded upwards. For more possibilities, see our wide range of options for Cross 5 at www.etac.com Frame colours Black -01 White -92 www.etac.com Manual Wheelchairs Cross 5 Active
March 2018 Maintaining and even improving a wheelchair user s functionality requires an optimally adjusted wheelchair based on the individuals abilities. With the Etac wheelchairs, shape and support are simply created by the rehab professional, with the user seated in the wheelchair. With an ability based approach we can strengthen the user s activity level. We call it Ability Based SeatingTM. Everyone should be able to live a free and independent life and pursue their dreams regardless of any physical circumstances For the latest news and continuously updated product information visit: www.etac.com Etac AB Kista Science Tower SE-164 51 Kista, Sweden Tel +46 371 58 73 30 Fax +46 371 58 73 90 info@etac.se www.etac.com