Product Information All Series Systems for safe electrical contact RIE-TECH GmbH Im Grund 5 7 78359 Orsingen-Nenzingen Tel. 07771-4100 Fax 07771 /7010 info@rie-tech.de
SRK series closed systems SRK slip-rings are closed components with individual positioning and by default with IP 64 protection. The installation into your system is easy. There are several axes and flange orientation possibilities. These components will be matched to your desired number of poles, your current load and the nature of the signals that are transmitted. A combination of media transmitters for air, water or hydraulic oil is possible. The gold / gold-transfer technique is used for power and signal transmission. special hard-gold gold 1 Closed slip-ring IP 64 with shaft flange Closed slip-ring IP 64 with single channel media transmission, for air, vacuum or hydraulic pressure up to 10 bar. 3 4 Closed slip-ring IP 64 with shaft finish with limited space for cables, on the side of the shaft. Closed slip-ring, IP 64 with multi-media transmitter for air, vacuum or hydraulic pressure to 10 bars. 5 6 Closed slip-ring, IP 64 with multi-media transmitter for hydraulic oil, electrical parts at the front. Pressure up to 500 bar. Closed slip-ring, IP 64 with multi-media transmitter for hydraulic oil, electrical parts at the back. Pressure up to 500 bar.
Flange variations of the SRK models 1 Standard flange with spacing to the casing and holes through it, to be able to place bolts from the flange side. Standard flange without spacing to the casing, and no holes for bolts to be used from the side of the unit. Short overall length. 3 Large flange with an overhang to the casing and holes through it, to be able to place screws from the side of the flange. Short overall length. Mounting is possible from the side of the machinery. Types of electrical connections 1 3 Simple standard: side of the casing and flange with cable. Upon request: flange side with cable and casing with plugs Upon request: flange side with plugs and casing with plugs 4 5 Upon request: flange side and/or casing with clamps. Upon request: contact via a connective bell with forced contact through plugs. 3
Dimensions Please consult with us for dimensions Overview of SRK slipring types Type Casing-ø Possible number of poles Remark SRK 40 40 mm 6-, 1-, oder 18-poles SRK 60 60 mm - bis 0-poles SRK 80 80 mm - bis 36-poles SRK 100 100 mm - bis 60-poles SRK 150 150 mm - bis 80-poles SRK 00 00 mm - bis 00-poles SRK 50 50 mm - bis 50-poles SRK 300 300 mm - bis 50-poles SRK 350 350 mm - bis 50-poles SRK 400 400 mm - bis 50-poles SRK 450 450 mm - bis 50-poles with cable LiYY... 0.5 mm ² available from stock We will send you 3D models on request 4
Overview of SRW slip-ring types (through bore) SRW slip-rings are closed components with individual positioning and by default with IP 64 protection. The slip-rings can be installed on a central rotating axe if desired. There are several axes and flange orientation possibilities. These components will be matched to your desired number of poles, your current load and the nature of the signals that are transmitted. A combination of media transmitters for air, water or hydraulic oil is possible. Note: Due to its hollow nature this slipring is larger and therefore a more expensive solution. These slip-rings should be used if the type SRK is not possible. special hard-gold gold 1 Closed slip-ring, IP 64 standard version with hollow shaft; attachment by clamping on the customer specific shaft. Closed slip-ring, IP 64 standard version with hollow shaft and flange. Fixing by tightening the flange at the customers factory. 3 4 Closed slip-ring, IP 64 with single or multi-channel media transmitter for air, vacuum or water. Closed slip-ring, IP 64 with multi-media transmitter for hydraulic oil; through bore hydraulic and electrical parts. 5
Types of electrical connection for SRW 1 Simple standard: Side of the casing and flange with cable. On request: Flange with cable, casing with connectors. 3 4 On request: Flange and/or casing with connectors. On request: Flange with connectors, casing with connectors. Dimension We will send you 3D models on request 6
Overview of SRW slip-ring types Type Casing-ø Possible number of poles Remark SRW 80 80 mm - bis 36-poles SRW 100 100 mm - bis 60-poles SRW 150 150 mm - bis 80-poles SRW 00 00 mm - bis 00-poles SRW 50 50 mm - bis 50-poles SRW 300 300 mm - bis 50-poles SRW 350 350 mm - bis 50-poles SRW 400 400 mm - bis 50-poles SRW 450 450 mm - bis 50-poles We will send you 3D models on request 7
SRP series plan system, small height SRP slip-rings rank components radially. They are used where space is available horizontally and where height limitations apply. SRP slip-rings can be made as open or as a closed, self-positioning units. The SRP components are made to measure and are provided for special requirements. The gold / gold-transfer technique is used for power and signal transmission. 1 Open design: The storage and the correct installation position are ensured by the customer. Shock protection and protection from pollution are also the responsibility of the customer. Closed design: IP 64 protection standards 8
SRO series open SRO slip-rings are delivered without casing. The user assumes the responsibility for their correct installation, shock protection and protection from dirt. The SRO components can be delivered with the gold/gold transmission technology, with high-speed-gold/gold transmission technology or with the conventional coal transmitter technology. The use of the conventional coal technology is only suitable for easy requirements. We recommend the use of closed components of the series SRK and SRW. 1 Gold / Gold-transmission technology These components can be used for signal and power transmission. We conceive and build these components, in a very compact way, but the operator assumes the responsibility for their proper installation, shock protection, and protection against contamination. Conventional grinding carbon technology The transmission of electricity with carbon brushes on bronze rings has been practiced for many years. This technique is only suitable for simple applications and not for signals. 9
Slip-rings readily available as a stock item These units with standard cables are available from stock within short time. Shielding cannot be transmitted with these slip-rings. 1 Closed slip-ring IP 64: ma-4a mv-50v revolutions 300 1/min Closed slip-ring IP 64, with through hole: ma-5a mv-50v revolutions 00 1/min 3 Open slip-ring carbon grinding technology: ma-1a, depending on the carbon brush mv-500v, depending on the application up to 00 1/min 10