HYDRAULIC DUMP SERIES D U M P Manufacturing industrial trailers since 1974. TRAILERS FT-6DT-E FT-10 DT-HD FT-16-2 DT-DO FT-20-2 DT-U ELLING TRAILERS wfive-year LIMITED WARRANTYw ufive-year LIMITED WARRANTYu Style: DT-100 Quality - Craftsmanship - Pride Since 1974 3
DT-E SERIES TRAILERS standard Hydraulic Dump or DT-E Series is a heavy duty dump trailer built to handle the big jobs. dump box is placed between the wheels allowing a lower profile thereby allowing easier loading and a lower center of gravity. Stop and compare our product with our competitors and you will see for yourself why is a leader in trailer design and durability. DT-E Series dump trailers are available in GVWRs ranging from 6,000 to 16,000 pounds. Shown above and to the right is the FT-6DT-E with optional spare tire. Shown above is the FT-6DT-E with optional 5 Landscape Gate. Shown above and below is the FT-7DT-E with standard 76 deck width. Shown above is the FT-12DT-E with optional tool box. FT-6DT-E 8-12 6,000# 6 hole mod ST225/75R15 LRD 1-6,000# FT-7DT-E 10-12 8,000# 5 hole mod ST225/75R15 LRD 2-3,500# FT-10DT-E 10-14 9,980# 6 hole mod ST225/75R15 LRD 2-6,000# FT-12DT-E 12-16 13,800# 8 hole mod ST235/80R16 LRE 2-6,000# FT-14DT-E 12-16 16,000# 8 hole mod ST235/80R16 LRE 2-7,000# Note: FT-6, 7DT-E standard w/single hydraulic cylinder, FT-10DT-E 10-12 standard w/single hydraulic cylinder - 14 standard w/twin hydraulic cylinders, FT-12 DT-E 12 standard w/single hydraulic cylinder - 14 standard w/twin hydraulic cylinders - 16 standard w/heavy duty scissor hoist. FT-14 DT-E come standard with a heavy duty scissor hoist. Page 2
DT-HD SERIES TRAILERS DT-HD Series; Skidsteer - Dump Trailer was designed as a multi-use trailer which you can use to haul both your Skidsteer (slide-out ramps) and other cargo (eg. rocks, cement chunks, landscape waste, etc.) It serves as both a Skid-steer and a dump trailer in one. DT-HD Series dump trailers are available in GVWRs ranging from 9,980 to 18,000 pounds. To the left: FT-12DT-HD with STD double rear swing-out doors and 10 ton scissor hoist. Shown above: Standard ramps with storage under the dump box. To the left is the FT-14DT-HD Shown above is the FT-14DT-HD with optional gooseneck. Just imagine the amount of time and money that will be saved over time. versatility of this model makes it the best seller in the Hydraulic Dump Trailer Line. Shown to the left is the FT-16DT-HD. Above is the FT-16DT-HD with Optional 44 Tall Sides, Spare Wheel and Tire with Mount and 1/2 Tarp Tie Rod around all four sides. FT-10DT-HD 10-14 9,980# 6 hole mod ST225/75R15 LRD 2-6,000# FT-12DT-HD 12-16 13,800# 8 hole mod ST235/80R16 LRE 2-6,000# FT-14DT-HD 12-16 16,000# 8 hole mod ST235/80R16 LRE 2-7,000# FT-16DT-HD 12-18 18,000# 8 hole plate 215/75R17.5 LRH 2-8,000# Note: FT-10DT-HD 10-12 length is standard with a single hydraulic cylinder - 14 is standard with twin hydraulic cylinders, the FT-12DT-HD thru the FT-16DT-HD are standard with a heavy duty scissor hoist and all are standard with 5 5 slide-out ramps, 80 ID, and double rear swing-out doors. Page 3
DECK-OVER DUMP TRAILERS Deck-Over Hydraulic Dump Trailer, or the DT-DO Series features a wider box since the box does not have to be contained between the wheels. box is positioned above the wheels allowing a wider stance thus giving a larger payload capacity. DT-DO Series dump trailers are available in GVWRs ranging from 15,000 to 20,000 pounds. Shown to the left is the FT-14-2 DT with optional 140,000# twin 2-speed landing gear. Shown above and to the right is the FT-16-2 DT with optional 44 solid fixed sides. Shown to left and above is the FT-16-2 DT with optional Gooseneck. Page 4 FT-12-2 DT 12-14 15,000# 8 hole mod ST235/80R16 LRE 2-6,000# FT-14-2 DT 12-16 17,500# 8 hole mod ST235/80R16 LRE 2-7,000# FT-16-2 DT 14-18 20,000# 8 hole plate LT215/75R17.5 LRH 2-8,000# Note: FT-12-2 DT, FT-14-2 DT and FT-16-2 DT-DO are standard with a heavy duty scissor hoist, 96 OD and double-acting spreader end gate.
CONTRACTOR & UTILITY DUMP TRAILERS DT-C Series; Contractor Body Dump Trailer was designed to be versatile on and off the job site. It comes standard with 14 hinged sides and extension brackets so you can load and unload materials easily. This model is also standard with a 20 doubleacting spreader end gate. DT-U Series; Utility/Grain Body Dump Trailer was designed with the demolition and small grain hauler in mind, great for hauling the big loads. Standard with 10 gauge sides with a 7 gauge floor, 50 high steel sides, tie rail on 4 sides and a single swing spreader/dump gate. DT-C and DT- Shown above: FT-20-2 DT-C (Contractor Body) with optional U Series dump trailers are available in GVWRs Gooseneck, 6 x 8 deck, spare wheel & tire, Under deck ramp storage and ramps. ranging from 22,500 to 40,000 pounds. Shown above: FT-18-2 DT-U (Contractor Body) Trailers has the best paint job in the industry, with a 3 year paint warranty along with a 5 year structural warranty. All Trailers are steel shot blasted prior to being painted, then a 5-coat paint process is electrostaticly applied in our state of the art painting facility. FT-20-2 DT-U (Utility/ Grain Body) with Std. Single Swing Spreader/ Dump Gate. Shown above: FT-30-2 DT-U (Utility/Grain Body) with Optional Gooseneck. Standard Single Swing Spreader/Dump Gate FT-18-2 DT-C 14-16 22,500# Budd ST235/80R16 LRE 2-9,000# FT-18-2 DT-U 14-18 22,500# Budd ST235/80R16 LRE 2-9,000# FT-20-2 DT-C 14-18 25,900# Budd ST235/80R16 LRE 2-10,000# FT-20-2 DT-U 14-18 25,900# Budd ST235/80R16 LRE 2-10,000# FT-24-2 DT-C 14-20 30,000# Budd ST235/80R16 LRE 2-12,000# FT-24-2 DT-U 14-20 30,000# Budd ST235/80R16 LRE 2-12,000# FT-30-2 DT-C 14-24 40,000# Hub Pilot LT215/75R17.5 LRH 2-15,000# FT-30-2 DT-U 14-24 40,000# Hub Pilot LT215/75R17.5 LRH 2-15,000# Page 5
GAS ENGINE & SIDE DUMP TRAILERS Trailers offers a multitude of features to ensure that we have the trailer to meet your needs. Gas Engine Hydraulic Dump Trailer has been designed for those who use their dump trailers non-stop and can t afford the delay a dead battery may cause.this trailer gives you unlimited power, you can work your dump all day without having to stop and recharge a battery. This feature is great for rental yards, the gas engine will keep the trailer running day in and day out without the hassle of making sure a battery is fully charged for the next customer. FT-12DT HD Each Gas Engine Dump Trailer is powered by small engine with a hydraulic unit mounted to the tongue of the dump trailer. SIDE DUMP SERIES LANDSCAPER S DELIGHT Trailers Side Dump landscape trailer is an asset to any landscaper s fleet. Side Dump trailer eliminates the need for multiple trailers to meet your needs for hauling and removal all in one, with payload capacities ranging from 3,000 to 5,000 lbs. Standard with split-full width spring-assist ramps, this trailer is accommodating to skid-steers and narrow equipment/machines with smaller tires such as lawnmowers, sod cutters, curb machines, sweepers, etc. Double-Acting Spreader Gate opens from either the top of the dump box (shown above.) Or opens from the base of the dump box (shown on the left.) Model shown is the FT-14DE-SD. FT-12DT-HD 5 + 14 or 5 + 16 13,800# 8 hole mod ST235/80R16 LRE 2-6,000# FT-14DT-HD 5 + 14 or 5 + 16 16,000# 8 hole mod ST235/80R16 LRE 2-7,000# FT-16DT-HD 5 + 14 or 5 + 16 18,000# 8 hole plate 215/75R17.5 LRH 2-8,000# Page 6
OPTIONAL FEATURES se are just some of the options available for the Dump Trailers. Contact Trailers or one of our dealers to find out more about the multitude of options available to customize a Dump Trailer to your exact needs. Spreader with Landscape Gate Double-Acting Spreader End Gate (STD on DT-E and DT-DO) Double Rear Spreader Gate Double Rear Swing-Out Gate (STD on DT-HD) Spare Wheel & Tire Gooseneck with 6 x 8 Top Deck Grain Doors in Dump Gate Doors Under deck Ramp Storage and Aluminum Ramps Page 7
To learn more about us, have us mail you a specific full color brochure, or locate your nearest dealer, go to www.felling.com or give us a call at 1-800-245-2809. Your TRAILER Dealer: 1525 Main Street South Sauk Centre, MN 56378 (320) 352-5239 (320) 352-5230 FAX Merle J. Felling, President Check out our Web Site at: www.felling.com E-mail us at: trailers@felling.com Call 1-800-245-2809 for your nearest dealer 2008 Felling Trailers, Inc. Form No. 150-30 5/08 Printed in U.S.A.