INDUSTRIL FLUID OWER COMONENTS ND SYSTEMS HV SERIES Manual/ roportional Directional Valves HV39 HV9 HV8 EHV39 Lever ctuated with Optional roportional Control 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com
HV8 Series General Features Standard Material Specifications High Strength Cast Iron Hard Chrome lated Interchangeable Spools Steel Spring Caps luminum Lever Caps NR Seals HV8-7-C Standard Features 3/4 to 7 Spool Monoblock Valve djustable Relief Valve (5-5 psi) Housed Knuckle Joint arallel Circuit Double ction Load Hold Check Valve HV8-7-C HV8 Series is a 8.5 gpm (7 lpm) monoblock valve available up to seven spools. Having the capacity of 8.5 gpm HV8 Series valves are used in larger machines and bigger pumps. Typical applications are: hydraulic presses, garbage and tipping trucks, hydraulic platforms, frontend loaders etc. General Specifications Standard Working Conditions Flow Rate...8.5 gpm (7 lpm) Maximum Operating ressure...5 psi (35 ar) Maximum ack ressure...435 psi (3 ar) Recommended Fluid Temperature Range...-4 o to 76 o F (- o to 8 o C) mbient Temperature Range...-3 o to 4 o F (-35 o to 6 o C) Recommended Oil Viscosity Range... cst to 75 cst Internal Leakage (at 45 psi ( ar); 3 cst, 4 o F (4 o C)...4 to 9 cc/ min Recommended Oil Filtering... > 75 Maximum Contamination Level...Class 9 (NS 638) 9/6 (ISO 446) Technical Specifications Number of Spools... - 7 Weight...Varies by number of spools selected (see following page) 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com
HV8 Series Units: mm (inches) Dimensional Data 7 (.6) 7 (.75) K L 9.5 (.37) Work orts # SE Tank ort # SE Tank ort (lternate, Comes lugged) # SE 8.7 (3.5) 8 o 34. (9.) 5.5 (.3) 36 (.4) ressure ort (lternate, Comes lugged) # SE T 8 (.7) 3x O 8.5 (.33) 33.5 (.39) 47 (.85) 69.5 (.74). (4.4) 4.3 (5.5) 8 o ressure ort # SE M.5 (3.96) 49 (.93) 38 45 45 44.9 (.5) (.77) (.77) (.76) Type HV8 - HV8 - HV8-3 HV8-4 HV8-5 HV8-6 HV8-7 L mm (inch) (3.94) 45 (5.7) 9 (7.48) 35 (9.5) 8 (.) 35 (.8) 37 (4.57) K mm (inch) 47.5 (5.8) 9.5 (7.58) 37.5 (9.35) 8.5 (.) 37.5 (.89) 37.5 (4.67) 47.5 (6.44) Weight kg (lbs) 5.65 (.4) 8.5 (8.).85 (3.9) 3.45 (9.6) 6.5 (35.3) 8.65 (4.).5 (46.5) 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com
HV8 Series Main Relief Valve Inlet with Main Relief Valve Inlet without Main Relief Valve Hydraulic Circuit arallel Circuit When the spool is operated, it intercepts the switch gallery by diverting the flow of oil to service port or. If two or more spools are actuated at the same time, the oil will power the service port that has the lower load by selecting the path with the least resistance; by throtting the spools, the flow of oil can be divided between two or more service ports. T T Series Circuit When the spool is operated, it intercepts the switch gallery by diverting the flow of oil to service port or. The oil that flows back from the actuator is carried to the switch gallery thus making it available to the service ports downstream from the series section. The pressure drop downstream is added to the pressure drop of the section itself. T T 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com
Spool Control osition/ ressure Drop Curves HV8 Series - T Spool-neutral position: OSITION ressure Drop bar (psi) 6 (3) 4 (3) (74) (45) 8 (6) 6 (87) 4 (58) (9) 6 5 4 3 No. of Sections 3 (7.93) 4 (.57) 5 (3.) 6 (5.85) 7 (8.49) 8 (.3) Flow l/min (gpm) Spool-out position: OSITION 5 (363) - / ressure Drop bar (psi) (9) 5 (8) (45) 5 (73) 6 5 4 3 No. of Sections Spool-in position: OSITION 3 (7.93) 4 (.57) 5 (3.) Flow 6 (5.85) l/min (gpm) 7 (8.49) 8 (.3) 4 positions and 4th position can be spool-in or spool-out position optionally: OSITION 3 3 ressure Drop bar (psi) 4 (3) (74) (45) 8 (6) 6 (87) 4 (58) (9) / - T 6 5 4 3 No. of Sections 3 3 (7.93) 4 (.57) 5 (3.) Flow 6 (5.85) l/min (gpm) 7 (8.49) 8 (.3) 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com
HV8 Series HV8-4 - C Ordering Information HV8 Series Monoblock (Manual) Lever Valve Sections = Section = Sections 3 = 3 Sections 4 = 4 Sections 5 = 5 Sections 6 = 6 Sections 7 = 7 Sections Configuration = 3 position, spring centered 4 = 3 position, detented Function = ll orts locked C = to T, & locked F = locked, & to T H = ll orts Open Options HVHNDLE = Handle HV8-DK = Detent Kit HV8- = ower eyond Sleeve HV8-CC = Closed Center lug HV8-IN-OR = Inlet Relief- ilot Operated Relief 7 (8.94) Units: mm (inches) 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com